Brother EN 1470 manual

HS-2000_brother_cov er_Eng P ANT ONE 285 K En g lis h 885 - S38 XE 3669 - 00 1 Printed in C hin a O p eration Manua l Com p uterized Sewing Machin e APPE N DI X U TILITY S TIT C HE S SE W I N G BASIC S K N O W I N G YOUR SE W I N G M ACHI N E Please visit us at http://solutions.brother .com where you can g et product suppor t and ans wers to freque[...]

Important Safety Instructions Please read these safety in structions before attempting to us e the machine. This machine is inte nded for household use. DANGER - To reduce the ri sk of electric shock: 1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any user ser vici ng adjustments menti one[...]

1 4 Always keep your work area clear: • Never operate the mac hine with any air openings blocked. Keep ventil ation openings of the sewing mach ine and foot control fre e from the build up of lint, dust, and loose cloth. • Do not store objects on the foot co ntroller. • Do not use extension c ords. Plug the mach ine directly into the el ectri[...]

2 8 For repair or adjustment: • If the Light unit (light-emitting d iode) is damaged, it must be replaced by auth orized dealer. • In the even t a malfunction occur s or adjustment is re quired, first follow th e troubleshooting table in the back of the operation manu al to inspect and adjust t he machine yourself. If the problem persists, plea[...]

3 CONTENTS 1. KNOWING YOUR SEWING MACH INE ........... ................ ...............................5 NAMES OF MACH INE PARTS AND THEIR FUNC TIONS ........................ ............................ 5 The main parts ................................................................................................... .............................[...]

——————————————————— —————————————————————————————— ———————— — 4 3. UTILITY STITCHES .......... ................. ................................ ................. ............ 34 OVERCASTING ST ITCHES ............... ................[...]

5 1 1 KNOWING YOUR SEWING MACHINE NAMES OF MACHINE PARTS AND THEIR FUNCTIONS The main parts a Bobbin winder (page 11) This winds the thread onto the bo bbin for use as the lower thread. b Spool pin (pages 11 and 16) This holds the spool of thread. c Hole for extra spool pin (page 23) This holds a second spool of thread for sewing with two needles. [...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 6 Needle and presser foot section a Buttonhole lever Lower the buttonhole lever when sewing buttonholes and bar tacks. b Needle threader (for models equipped with the needle threader) (page 17) c [...]

7 1 Operation panel The operation panel, located on the front of the sewing machine, allows you to select a stitch and specify how the stitch will be sewn. a LCD (liquid crystal display) The number of the selected stitch ( 1 ), the presser foot to be used ( 2 ), the stitch length (mm) ( 3 ), and the stitch width (mm) ( 4 ) are displayed here. b Sti[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 8 ACCESSORIES The following accessories are stored in the flat bed attachment. We have designed these accessories to help you be able to carry out most sewing tasks. Note ● Foot controller: Mode[...]

9 1 USING YOUR SEWING MACHINE Power supply precautions Be sure to observe the following precautions conc erning the power supply. Power supply a Insert the plug into a wall outlet. a Main power switch b Jack/socket connector b Set the main power switch to “I”. X The sewing lamp c omes on when the machine i s turned on. c To turn off the machine[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 10 Foot controller Insert the foot controller plug into it s jack/socket on the rear side of the sewing machine. a Foot controller jack/socket When you press the foot controller down lightly, the [...]

11 1 THREADING TH E MACHINE Winding the bobbin This section describes how to wind the thread onto the bobbin. • For details on the fast bobbin winding, see page 13. a Pre-tension disk b Bobbin winder shaft c Bobbin a Pull up the spool pin as far as possible, and then put a spool of thread on this pin. b Pass the thread around the pre-tension disk[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 12 f While holding the end of the thread, gently press the foot controll er or press (start/ stop button) (for models equipped with the start/stop button) to wind the thread arou nd the bobbin a f[...]

13 1 ■ For models equipp ed with the fast bobbin winding system a Follow steps 1 throug h 2 of the procedur e in “Winding the bobbin” to pass the thread around the pre-tensio n disk (page 11). b Place the bobbin on th e bobbin winder shaft so that the spring on the shaft fits into the notch in the bobbin. a Notch b Bobbin winder shaft spring [...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 14 Memo ● When the sewing machin e is started or the handwheel is turned after wi nding the thread around the bobbin, the machine will make a clicking sound; this is not a malfunction. ● The n[...]

15 1 e Replace the bobbin cover. Put the left tab in place (see arrow a ), and then pres s lightly on the right side (see arrow b ) until the cover clicks into place. • Replace the cover so that the end of the thread comes out from the left si de of the cover (as shown by the line in the diagram). ■ For models equipp ed with the quick-set bobbi[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 16 Upper thre ading Set the upper thread and thread the needle. • For details on the needle threader, see page 17. a Spool pin b Thread guide c Mark on the handwheel a Raise the presser foot usi[...]

17 1 c Pull up the spool pin as far as possible, and then put a spool of thread on this pin. d Feed the upper thread as shown in the figure on the previous page. e Make sure you guide the thread through the thread take-up lever from right to left. a Thread take-up lever f Put the thread behind the needle bar thread guide above the needle. The threa[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 18 d Fully lower the needle threader lever. X The end o f the needle threa der rotates toward you an d the hook passes through the eye of the ne edle. e Catch the thread on the hook as shown below[...]

19 1 Drawing up the lower thread a Lightly hold the end of the upper thread. a Upper thread b While holding the end of the upper thread, raise the needle eith er by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle po sition button) (for models equipped with the needle position button[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 20 REPLACING THE NEEDLE This section provides informati on on sewing machine needles. Needle precautions Be sure to observe the fo llowing precautions concerning the handling of the needle . Failu[...]

21 1 Checking the needle Sewing with a bent needle is extrem ely dangerous since the needle may br eak while the machine is being operated. Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even. a Flat side b Needle type marking ■ Correct needle a F[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 22 d Hold the needle with your lef t hand, and then use a screwdriver to turn the needle clamp screw counterclockwise to remove the needle. Note ● The needle can be removed by simply loosening t[...]

23 1 Sewing with a twin needle We have designed your machine so you can sew with this need le and two top threads. You can use the same color or two different colors of th read for making decorative stitches. For details on the stitches that can be sew n with the twin needle, refer to “Stitch settings” (page 56). ■ Twin needle threading a Att[...]

KNOWING YOUR SEWING MACHINE ————————————————— ——————————————————————— — 24 REPLACING THE PRESSER FOOT Replacing the presser foot Replace the presser foot as described below. a Raise the needle by turning the handwheel toward you (countercloc kwise) so that the mark on[...]

25 1 f Slowly lower the presser foot lever so that the presser foot pin snaps into the shank in the presser foot holder. a Presser foot lever X The presser foot is attached. g Raise the presser foot lever to check that the presser foot is securely attached. Removing the presser foot holder Remove the presser foot ho lder when cle aning the sewing m[...]

SEWING BASICS — —————————————————————————————— ——————————————————— — 26 2 SEWING BASICS SEWING Basic sewing operations are described below. Before operating the sewing machin e, read the following precautions. General sewing procedure Follow the ba[...]

27 2 Selecting stitching Using the stitch selection keys, select the desired stitch. When the sewing machine is turned on, the straight stitch ( left needle position) is selec ted. a Turn on the sewing machine. b Press (stitch selection keys). The number of the selected stitch is displayed. Press the “+” or “–” side of to increase or redu[...]

SEWING BASICS — —————————————————————————————— ——————————————————— — 28 Starting to sew a Raise the needle by turning the handwheel toward you (counterclockw ise) so that the mark on the wheel points up. (With models equipped with (needle positio n[...]

29 2 j Raise the presser foot lever. k Pull the fabric to the left side of the machine , and then pass the threads through the thread cutter to cut them. a Thread cutter Memo ● When the foot controll er is plugged in, (start/stop button) cannot be used to sta rt sewing. ● When sewing is stopped, the needle remains lowered (in the fabric). The m[...]

SEWING BASICS — —————————————————————————————— ——————————————————— — 30 Memo ● When you finish sewing, remov e the bobbin cover and then make sure that the thread is shown as below. If the thread is not shown as below, the thread is not inserted [...]

31 2 USEFUL SEWING TIPS Various ways to achieve better results for your sewing projects are describe d below. Refer to these tips when sewing your project. Trial sewing After you select a stitch, the ma chine automatically sets the stitch wi dth and length for the stitch that is selected. However, a trial piece of fabric should be sewn since, depen[...]

SEWING BASICS — —————————————————————————————— ——————————————————— — 32 ■ If thick seams are being se wn and the fabric does not feed at the begi nning of stitching Zigzag foot “J” is equipp ed with a fea ture that keeps the presser foot leve[...]

33 2 Sewing thin fabrics When sewing t hin fabrics, the stitching may become misaligned or the fabric may not feed correctly. If this occurs, place thin pa per or stabilizer material under the fabric and sew it together with the fab ric. When you have finished sewing, tear off any excess paper. a Stabilizer material or paper Sewing stretch fabrics [...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 34 3 UTILITY STITCHES OVERCASTING STITCHES You can use the overcasting stitches to join together seams and finish th em in one operation. They ar e also useful for sewing stretch m[...]

35 3 BASIC STITCHING Straight stitches are used for se wing plain seams. Three stitche s are available for basic stitching. *Rev.: Reverse **Rfc.: Reinforcemen t ***Do not use r everse stitching. Basic stitching a Baste or pin together the fabric pieces. b Attach zigzag foot “J”. c Select a stitch. • For details, refer to “Selecting stitchi[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 36 BLIND HEM STITCHING You can use the Blind Hem Stitch to finish the edge of a project, like the hem of a pair of trous ers, without the stitch showin g. *Rfc.: Reinforcement a Re[...]

37 3 e Unfold the edge of fabr ic, and position t he fabric with the w rong side facing up. a Wrong side of fabric b Basting c Edge of fabric f Attach blind hem foot “R”. g Select a stitch. h Remove the flat bed attachment and make free-arm sewing possible. • For details on free-arm sewing, refer to “Using a free-arm style” (page 33). i S[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 38 ■ If the needle catches to o much of the hem fold If the needle catches too much of the hem fold, adjust the stitch width so that the needl e slightly catches the fold by pres[...]

39 3 BUTTONHOLE SEWING Buttonholes can be sewn and buttons can be sewn on. *Auto Rfc.: Automati c Re inforc ement **Rfc.: Reinforcement The maximum buttonhole length is about 28 mm (1 -1/8 inch) (diameter + th ickness of the button). Buttonholes are sewn from the front of the presser foot to the back, as shown below. Stitch Name Pattern Presser Foo[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 40 The names of parts of buttonhole foot “A”, which is used for sewing buttonholes, are indicated below. a Button guide plate b Presser foot scale c Pin d Marks on buttonhole f[...]

41 3 • When lowering the presser foot, d o not push in the front of the pre sser foot, o therwise the buttonhole will not be sewn with the correct size. a Do not reduce the gap. f Pull down the buttonhole lever as far as possible. a Buttonhole lever The buttonhole lever is positioned behind the bracket on the buttonhole foot. a Buttonhole lever b[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 42 ■ Sewing buttonholes on stretch fabrics When sewing buttonho les on stretch fabrics, use a gimp thread. a Hook the gimp thread onto the pa rt of buttonhole foot “A” shown [...]

43 3 d Place a button between the presser foot and the fabric. • When attaching four-hole buttons, first sew the two holes closest to you. Then, slide the button so that the needle g oes into the two holes toward the rear of the sewing machine, and then sew them in the same way. e Select a stitch . (With models not provided with stitch , select s[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 44 ZIPPER INSERTION You can use the zipper foot to sew differ ent types of zippers, and can easily positi on it t o the right or left side of the needle. When sewing the right side[...]

45 3 SEWING STRETCH FABRI CS AND ELASTIC TAPE Stretch fabrics can be sewn a nd elastic tape can be attached. *Rfc.: Reinforcement Observe the corresponding precautions when performi ng each of the following stitching operations. Stretch stitching a Attach zigzag foot “J”. b Select stitch . c Sew the fabric without stretching it. Elastic attachi[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 46 APPLIQUÉ, PATCHWORK AND QUILT STITCHING The stitches that can be used for sewing app liqués, patchwork and quilts are descri bed below. *Rfc.: Reinforcement **Do not use rever[...]

47 3 d Carefully sew around the edge of the design. e Cut away any fabric that is left outside the stitching. f Remove the basting, if necessary. Memo ● Make reinforcing straight stitches at the beginning and the end of stitching. Patchwork (crazy quilt) stitching a Fold the edge of the top piece of fabric and place it over the lower piece. b Sew[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 48 Quilting Sandwiching batting betw een the top and bottom layers of fabric is called “quilting”. Qu ilts can easily be sewn using the option al walking foot and the optional [...]

49 3 Free-motion quilting With free-motion quilting, the feed dogs can be lowered (using the feed dog position leve r) so that the fabric can be moved freely in any direction. The optional quilting foot is needed for free-motion quilting. a Remove the presser foot and the presser foot holder. • For details, refer to “Removing the presser foot h[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 50 REINFORCEMENT STITCHING Reinforce points that will be subject to strain, such as sleeve hol es, inseams and pock et corners. *Rfc.: Reinforcement **Auto Rf c.: Automati c Re inf[...]

51 3 c Select stitch . d Position the fa bric so that the opening of the pocket faces toward you, and then lower the presser foot lever so that the needle drops 2 mm (1/16 inch) in front of the pocket opening. a 2 mm (1/16 inch) Pass the upper thread down through the hole in the presser foot. • When lowering the presser foot, d o not push in the [...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 52 DECORATIVE STITCHING Various decorative stitche s can be sewn with this sew ing machine. *Rfc.: Reinforcement Stitch Name Pattern Presser Foot Pattern No. Application Stitch Wid[...]

53 3 Fagoting Stitching across an open seam is called “fagoting”. It is used on blouses and child ren's clothing. This stitch is more decorative when thicker thread is used. a Use an iron to fold the two pieces of fabric along their seams. b Baste the two pieces of fabric, separated by about 4.0 mm (3/16 inch), onto thin paper or a sheet o[...]

UTILITY STITCHES —————————————————— ——————————————————————————————— — 54 Smocking The decorative stitch creat ed by stitching or embroidering over gathers is called “smocking”. It is used to decorate th e f r ont of blouses or cuffs. The smocking[...]

55 3 e Unfold the fabr ic, and then iron the tucks down to one side . Joining Decorative bridging stitches can be sewn over the seam allowance of joined fa brics. This is used wh en making a crazy quilt. a Attach zigzag foot “J”. b Sew together the right sides of the two pieces of fabric, and then open up the seam allowances. a Wrong side of fa[...]

APPENDIX —————————————————— —————————————————————————————— ———— — 56 4 APPENDIX STITCH SETTINGS Applications, stitch lengths and widths and whether the twin needle can be used are list ed for utility stitches in the following table. Utility sti[...]

57 4 Stitch Name Pattern Presse r Foot Pattern No. Application Stitch Width [mm (inch.)] Stitch Leng th [mm (inch.)] Twin Needle Walking Foot Reverse/ Reinforcement Stitching 70 stitches model 60 stitches model 50 stitches model 40 stitches model Auto Manual Auto Manual Blind hem stitch R 0 90 90 9 0 9 Blind hem stitching on medium weight fabrics 0[...]

APPENDIX —————————————————— —————————————————————————————— ———— — 58 Stitch Name Pattern Presse r Foot Pattern No. Application Stitch Width [mm (inch.)] Stitch Leng th [mm (inch.)] Twin Needle Walking Foot Reverse/ Reinforcement Stitching 70 st[...]

59 4 Stitch Name Pattern Presse r Foot Pattern No. Application Stitch Width [mm (inch.)] Stitch Leng th [mm (inch.)] Twin Needle Walking Foot Reverse/ Reinforcement Stitching 70 stitches model 60 stitches model 50 stitches model 40 stitches model Auto Manual Auto Manual Appliqué stitch (for quilting) J4 1 4 1- - Attaching appliqués and binding 1.[...]

APPENDIX —————————————————— —————————————————————————————— ———— — 60 *Rfc.: Reinforcement **Select a stitch width of 5.0 m m (3/16 inch) or less. Stitch Name Pattern Presse r Foot Pattern No. Application Stitch Width [mm (inch.)] Stitch Leng th[...]

61 4 MAINTENANCE Simple sewing machine maintenan ce operations are described below. Cleaning the machine surface If the surface of the machine is dirty, lightly soak a cloth in neutral detergen t, squeeze it out firmly, and then wipe the surface of th e machine. After cleaning it once with a wet cloth, wipe it again with a dry cloth. Cleaning the b[...]

APPENDIX —————————————————— —————————————————————————————— ———— — 62 e Remove the bobbin case. Grasp the bobbin case, and then pull it out. a Bobbin case f Use the cleaning brush or a vacuum cleaner to remove any dust from the race and its surr[...]

63 4 TROUBLESHOOTING If the machine stops operating correctly, check the follow ing possible problems befo re requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visi t us at [http://solu tions.brother.com]. If the problem persists, c[...]

APPENDIX —————————————————— —————————————————————————————— ———— — 64 The upper thread breaks. You have not inserted the needle properly. Insert the needle properly . page 21 The area around the hole in the nee- dle plate is scratched. Replace t[...]

65 4 The fabric is wrinkled. You have not threaded the upper thread properly or fitted the bobbin properly. Thread the upper thread and wind the bobbin thread properly. page 14, 15, 16 You have not fitted the spool properly. Fit th e spo ol pro pe rly . – You have not used the right combina- tion of fabric, thread and needle. Choose a thread and [...]

APPENDIX —————————————————— —————————————————————————————— ———— — 66 ERROR MESSAGES If an operation is performed incorrectly before the se wing machine is set up, an error message appears on the operation panel. Follow the inst ructions indicat[...]

67 4 i INDEX Numerics 3-point zigzag stitch ....................................................... 34 A accessories ....................................................................... 8 appliqués ................................................................. ...... 46 B bar tack .............................................................[...]

——————————————————— —————————————————————————————— ———————— — 68 T thick fabrics.................... ................................................ 31 thin fabrics ....................................................................[...]

[...]

HS-2000_brother_cov er_Eng P ANT ONE 285 K En g lis h 885 - S38 XE 3669 - 00 1 Printed in C hin a O p eration Manua l Com p uterized Sewing Machin e APPE N DI X U TILITY S TIT C HE S SE W I N G BASIC S K N O W I N G YOUR SE W I N G M ACHI N E Please visit us at http://solutions.brother .com where you can g et product suppor t and ans wers to freque[...]