Cadillac 2010 Escalade EXT manual

2010 Cadillac Escalade EXT Owner Manual M In Brief ................ .......... ........... ....... 1 - 1 I n s t r u m e n t P a n e l ... .............................. 1 - 2 Initial Drive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 V ehicle Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Per[...]

2010 Cadillac Escalade EXT Owner Manual M Service and Appearance Care . . . . . . . . . . . . . . . . . . . 7-1 S e r v i c e .................................... ....... 7 - 4 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 Checking Things Under the Hood . . . . . . . . . . . . . . . 7-12 All-Wh[...]

GENERAL MOTORS, GM, the GM Emblem, CADILLAC, the CADILLAC Crest & Wreath, and the names ESCALADE and EXT are registered trademarks of General Motors. This manual describes features that may or may not be on your specific vehicle either because they are options that you did not purchase or due to changes subsequent to the printing of this owner [...]

Safety W arnings and Symbols W arning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them. Danger indicates a hazard with a high level of risk which will result in serious injury or death. W arning or Caution indicates a hazard that could result in injury or death. { W ARNING: These mean there[...]

V ehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. 0 : Adjustable Pedals 9 : Airbag Readiness Light # : Air Conditioning ! : Antilock Brake System (ABS) g : Audio Steering Wheel Controls or OnStar ® $ : Brake System Warning Light "[...]

2 NOTES vi[...]

Section 1 In Brief Instrument Panel ................................... 1-2 Initial Drive Information .. ....... .................. 1-4 Remote Keyless Entry (RKE) System . . . . . . . . . . . 1-4 Remote V ehicle Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Instrument Panel 1-2[...]

A. Outlet Adjustment on page 4 ‑ 24 . B. T urn Signal/Multifunction Lever on page 4 ‑ 4 . C. Hazard Warning Flashers on page 4 ‑ 3 . D. Instrument Panel Cluster on page 4 ‑ 26 . E. Shift Lever/T ow/Haul Selector Button. See Automatic T ransmission Operation on page 3 ‑ 35 and T ow/Haul Mode on page 3 ‑ 39 . F . Analog Clock on page 4 ?[...]

Initial Drive Information This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can be found later in this owner manual. Remote Keyless Entry (RKE) System The RKE transmitter is used to remotely lock and unlock t[...]

Remote V ehicle Start With this feature the engine can be started from outside of the vehicle. Starting the V ehicle 1. Aim the RKE transmitter at the vehicle. 2. Press Q . 3. Immediately after completing Step 2, press and hold / until the turn signal lamps flash. When the vehicle starts, the parking lamps will turn on and remain on as long as the [...]

Midgate ® This vehicle is equipped with a Midgate ® and a removable rear glass panel. The Midgate allows you to extend the length of the vehicle's cargo area. For more information see Midgate ® on page 3 ‑ 12 . T ailgate Use the Remote Keyless Entry (RKE) transmitter or power door lock switch to lock and unlock the tailgate. Open the tail[...]

Seat Adjustment Front Seats Power Seats The power seat controls are located on the outboard side of the front seats. Move the seat forward or rearward by sliding the control forward or rearward. Raise or lower the front or rear part of the cushion by moving the front or rear part of the control up or down. Raise or lower the entire seat by moving t[...]

Power Reclining Seatbacks T o recline the seatback, tilt the top of the control rearward. T o bring the seatback forward, tilt the top of the control forward. See Power Reclining Seatbacks on page 2 ‑ 7 . Memory Features The controls for this feature are located on the driver door , and are used to program and recall memory settings for the drive[...]

Heated Seats On vehicles with heated and cooled front seats, the controls are located on the climate control panel. { (Cooled Seat): Press to cool the entire seat. + (Heated Seatback): Press to heat the seatback only . z (Heated Seat and Seatback): Press to heat the seat and seatback. Continue to press the desired button to cycle through the temper[...]

Safety Belt Refer to the following sections for important information on how to use safety belts properly . . Safety Belts: They Are for Everyone on page 2 ‑ 10 . . How to Wear Safety Belts Properly on page 2 ‑ 15 . . Lap-Shoulder Belt on page 2 ‑ 24 . . Lower Anchors and T ethers for Children (LA TCH) on page 2 ‑ 39 . Sensing System for Pa[...]

Mirror Adjustment Exterior Mirrors V ehicles with outside power mirrors and foldaway mirrors have controls located on the driver door . 1. Press (A) or (B) to select the driver or passenger side mirror . 2. Press one of the four arrows located on the control pad to adjust the mirror . 3. Press the opposite side to get the control pad to a neutral p[...]

Interior Mirror V ehicles with a manual rearview mirror can be adjusted to see clearly behind the vehicle. Hold the mirror in the center to move it up or down and side to side. T o reduce headlamp glare during nighttime use, move the lever at the bottom of the mirror to the right. Move it to the left for daytime use. V ehicles with an automatic dim[...]

Interior Lighting Dome Lamps The dome lamps come on when any door is opened. They turn off after all the doors are closed. The dome lamps can also be turned on by turning the instrument panel brightness knob, located on the instrument panel to the left of the steering column, clockwise to the farthest position. In this position, the dome lamps rema[...]

Exterior Lighting The exterior lamps control is located on the instrument panel to the left of the steering wheel. 9 : Turns off the automatic headlamps and daytime running lamps (DRL). T urning the headlamp control to the off position again will turn the automatic headlamps or DRL back on. For vehicles first sold in Canada, the off position only w[...]

Windshield Wiper/W asher This lever is located on the left side of the steering column. 8 : For a single wiping cycle, turn the band to mist. Hold it there until the wipers start, then release. For more wipes, hold the band on mist longer . 6 : The wiper speed can be set for a long or short delay between wipes. T urn the band up or down for a short[...]

Climate Controls The heating, cooling, and ventilation in the vehicle can be controlled with this system. Climate Control with Heated and Cooled Seats shown A. Driver and Passenger T emperature Controls B. AUTO C. Air Recirculation D. Air Conditioning E. Heated and Cooled Seats F . Fan Control G. Defrost H. Rear Window Defogger I. Air Delivery Mode[...]

attainable range with all lower gears accessible. As an example, when 4 (Fourth) gear is selected, 1 (First) through 4 (Fourth) gears are available. Press the plus/minus buttons, located on the steering column shift lever , to select the desired range of gears for current driving conditions. See Automatic T ransmission Operation on page 3 ‑ 35 . [...]

Steering Wheel Controls Audio steering wheel control functions could differ depending on the vehicle's options. Some audio controls can be adjusted at the steering wheel. w / x : Press to change favorite radio stations, select tracks on a CD/DVD, or to navigate tracks or folders on an iPod ® or USB device. b g : Press to silence the vehicle s[...]

Bluetooth ® For vehicles with an in-vehicle Bluetooth system, it allows users with a Bluetooth enabled cell phone to make and receive hands-free calls using the vehicle ’ s audio system and controls. The Bluetooth enabled cell phone must be paired with the in-vehicle Bluetooth system before it can be used in the vehicle. Not all phones will supp[...]

T (V ehicle Information): Press this button to display the oil life, units, tire pressure readings for vehicles with the T ire Pressure Monitor System (TPMS), Remote Keyless Entry (RKE) transmitter programming, compass zone setting, and compass recalibration. U (Customization): Press this button to customize the feature settings on your vehicle. Se[...]

Cruise Control Cruise Control shown with Heated Steering Wheel Button (If Equipped) The cruise control buttons are located on left side of the steering wheel. T : T urns the system on or off. The indicator light is on when cruise control is on and turns off when cruise control is off. + RES : Press to make the vehicle accelerate or resume a previou[...]

Ultrasonic Parking Assist This feature uses sensors on the rear bumper to detect objects while parking the vehicle. It operates at speeds less than 8 km/h (5 mph). URP A uses audio beeps to provide distance and system information. Keep the sensors on the vehicle's rear bumper clean to ensure proper operation. The system can be disabled by pres[...]

Performance and Maintenance StabiliT rak ® The vehicle may have a traction control system that limits wheel spin and the StabiliT rak system that assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started. . T o turn off traction control, press and release 5[...]

Y ou may notice during cooler conditions that the low tire pressure warning light will appear when the vehicle is first started and then turn off as you drive. This may be an early indicator that your tire pressures are getting low and the tires need to be inflated to the proper pressure. Note: The T ire Pressure Monitor can alert you about low tir[...]

Roadside Service U.S. or Canada: 1-800-882-1 1 12 TTY Users: 1-888-889-2438 As the owner of a new Cadillac, you are automatically enrolled in the Roadside Service program which is available 24 hours a day , 365 days a year . Roadside Service and OnStar If you have a current OnStar subscription, press the OnStar button and the current GPS location w[...]

How OnStar Service Works Q : This blue button connects you to a specially trained OnStar advisor to verify your account information and to answer questions. ] : Push this red emergency button to get priority help from specially trained OnStar emergency advisors. X : Push this button for hands ‐ free, voice ‐ activated calling and to give voice [...]

The vehicle must have a working electrical system, including adequate battery power , for the OnStar equipment to operate. There are other problems OnStar cannot control that may prevent OnStar from providing OnStar service at any particular time or place. Some examples are damage to important parts of the vehicle in a crash, hills, tall buildings,[...]

2 NOTES 1-28[...]

Section 2 Seats and Restraint System Head Restraints ............................... ..... 2-2 Front Seats ......................................... 2-3 Power Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Power Lumbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Heated and Cooled Seats [...]

Head Restraints The front seats have adjustable head restraints in the outboard seating positions. { W ARNING: With head restraints that are not installed and adjusted properly , there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted p[...]

Pull the head restraint up to raise it. T o lower the head restraint, press the button, located on the top of the seatback, and push the restraint down. Push down on the head restraint after the button is released to make sure that it is locked in place. The head restraints are not designed to be removed. The rear seat has head rests that can be ad[...]

. Raise or lower the rear part of the seat cushion by moving the rear of the control up or down. . Raise or lower the entire seat by moving the entire control up or down. The power reclining seatback control is located behind the power seat control on the outboard side of the seats. See Power Reclining Seatbacks on page 2 ‑ 7 . Y our vehicle has [...]

Release the control when the lower seatback reaches the desired level of lumbar support. Y our vehicle may have a memory function which allows seat settings to be saved and recalled. See Memory Features on page 2 ‑ 6 for more information. Keep in mind that as your seating position changes, as it may during long trips, so should the position of yo[...]

Memory Features Y our vehicle has the memory package. The controls for this feature are located on the driver's door , and are used to program and recall memory settings for the driver's seat, outside mirrors, steering wheel position, and the adjustable throttle and brake pedal feature, if your vehicle has it. T o save your positions in m[...]

and press the appropriate function control for two seconds. Then try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer/retailer for service. Easy Exit Seat The control for this feature is located on the driver ’ s door between buttons 1 and 2. With the veh[...]

{ W ARNING: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. (Continued) W ARNING: (Continued) The shoulder belt cannot do its job. In a crash, you could go into it, receiving neck or other injuries. The lap belt cannot do it[...]

Rear Seats Rear Seat Operation The rear seat is a 60/40 split bench seat that can be folded to give you more cargo space and access to the folding midgate. See Midgate ® on page 3 ‑ 12 for more information on operation of the folding midgate. T o fold either side of the seat do the following: 1. Push the rear seat head restraints all the way dow[...]

T o return the seats to the normal position, push the seatback up and fold the seat cushion down. { W ARNING: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure t[...]

{ W ARNING: People riding on the tailgate (if equipped) can easily lose their balance and fall even when the vehicle is operated at low speeds. Falling from a moving vehicle may result in serious injuries or death. { W ARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these a[...]

Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. T ake the simplest vehicle. Suppose it is just a seat on wheels. Put someone on it. 2-12[...]

Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield... 2-13[...]

or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. Y ou get more time to stop. Y ou stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. 2-14[...]

Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? A: Y ou could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted. And you can unbuckle a safet[...]

Occupants who are not buckled up can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. First, before you or your passenger(s) wear a safety belt, there is important information you should know . Sit up straight and always keep your feet on the floor in front of you. The lap part of the [...]

Q: What is wrong with this? A: The shoulder belt is too loose. It will not give as much protection this way . { W ARNING: Y ou can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury . The shoulder belt should fit snugly against your body . 2-17[...]

Q: What is wrong with this? A: The lap belt is too loose. It will not give nearly as much protection this way . { W ARNING: Y ou can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snu[...]

Q: What is wrong with this? A: The belt is buckled in the wrong buckle. { W ARNING: Y ou can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into [...]

Q: What is wrong with this? A: The belt is over an armrest. { W ARNING: Y ou can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries. Be[...]

Q: What is wrong with this? A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. { W ARNING: Y ou can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury . Also, the belt would apply too m[...]

Q: What is wrong with this? A: The belt is behind the body . { W ARNING: Y ou can be seriously injured by not wearing the lap-shoulder belt properly . In a crash, you would not be restrained by the shoulder belt. Y our body could move too far forward increasing the chance of head and neck injury . Y ou might also slide under the lap belt. The belt [...]

Q: What is wrong with this? A: The belt is twisted across the body . { W ARNING: Y ou can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly , or ask your dealer/retailer to fix it. 2-23[...]

Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly . 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. T o see how , see “ Seats ” in the Index. 2. Pick up the latch plate and pull the belt across you. Do not let it[...]

4. If equipped with a shoulder belt height adjuster , move it to the height that is right for you. See “ Shoulder Belt Height Adjustment ” later in this section for instructions on use and important safety information. 5. T o make the lap part tight, pull up on the shoulder belt. It may be necessary to pull stitching on the safety belt through [...]

Shoulder Belt Height Adjuster The vehicle has a shoulder belt height adjuster for the driver and right front passenger positions. Adjust the height so that the shoulder portion of the belt is centered on the shoulder . The belt should be away from the face and neck, but not falling off the shoulder . Improper shoulder belt height adjustment could r[...]

Rear Safety Belt Comfort Guides This vehicle may have rear shoulder belt comfort guides. If not, they are available through your dealer/ retailer . The guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed and properly adjusted, the comfort guide positions the belt away f[...]

3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. { W ARNING: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. (Continued) W ARNING: (Continued) The shoulder belt should go over the s[...]

T o remove and store the comfort guide, squeeze the belt edges together so that the safety belt can be removed from the guide. Slide the guide into its storage clip on the interior body or storage pocket on the side of the seat. Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are m[...]

Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle's safety belts. The manufacturer's instructions that come with the booster seat state the weight and height limitations for that booster . Use a booster seat with a lap-shoulder belt until the child passes the below fit test: . Sit all t[...]

Q: What is the proper way to wear safety belts? A: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. This applies belt force to the child's pelvic bo[...]

{ W ARNING: Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly . In a crash, the child would not be restrained by the shoulder belt. The child could move too far forward increasing the chance of head and neck injury . The[...]

{ W ARNING: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Never leave children unattended in a vehicle and never allow children to play with the safety belts. Airbags plus lap ‐ shoulder belts offer protection for adults and older children, but not for youn[...]

{ W ARNING: Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat. It is also better to secure a forward-facing child restraint in a rear seat. If you must secur[...]

Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle's owner , are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight, height, and age but also whether or not the restraint will be compatible wit[...]

Child Restraint Systems A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (B) provides restraint for the child's body with the harness. A booster [...]

Securing an Add-On Child Restraint in the V ehicle { W ARNING: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle's safety belt or LA TCH system, following the instructions that came with that child restraint a[...]

forward-facing child seat; an older child riding in a booster seat; and children, who are large enough, using safety belts. A label on the sun visor says, “ Never put a rear-facing child restraint in the front. ” This is because the risk to the rear-facing child is so great, if the airbag deploys. { W ARNING: A child in a rear-facing child rest[...]

Lower Anchors and T ethers for Children (LA TCH) The LA TCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier . The LA TCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LA TCH system. Make sure that a LA TCH[...]

T op T ether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash. [...]

The right side rear passenger and center seating positions have exposed metal anchors located in the crease between the seatback and the seat cushion. T o assist you in locating the top tether anchors, the top tether anchor symbol is located near the top tether anchors. The top tether anchors are located on the back of the rear seat frame above the[...]

According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint on page 2 ‑ 37 for additional information. Securing a Child Restraint Designed for the LA TCH System { W ARNING: If a LA TCH-type child [...]

Notice: Do not let the LA TCH attachments rub against the vehicle ’ s safety belts. This may damage these parts. If necessary , move buckled safety belts to avoid rubbing the LA TCH attachments. Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its sto[...]

If the position you are using has an adjustable headrest or head restraint and you are using a dual tether , route the tether around the headrest or head restraint . If the position you are using has an adjustable headrest or head restraint and you are using a single tether , raise the headrest or head restraint and route the tether under the headr[...]

3. T ighten the top tether . 4. Push and pull the child restraint in different directions to be sure it is secure. Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child rest[...]

3. Push the latch plate into the buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary . 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 2-46[...]

5. T o tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor . When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. If the child r[...]

A label on the sun visor says, “ Never put a rear-facing child seat in the front. ” This is because the risk to the rear-facing child is so great, if the airbag deploys. { W ARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facin[...]

Y ou will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder portions [...]

6. T o tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor . When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. 7. Push and pul[...]

Airbag System The vehicle has the following airbags: . A frontal airbag for the driver . . A frontal airbag for the right front passenger . . A seat ‐ mounted side impact airbag for the driver . . A seat ‐ mounted side impact airbag for the right front passenger . . A roof-rail airbag for the driver and passenger directly behind the driver . . [...]

Here are the most important things to know about the airbag system: { W ARNING: Y ou can be severely injured or killed in a crash if you are not wearing your safety belt — even if you have airbags. Airbags are designed to work with safety belts, but do not replace them. Also, airbags are not designed to deploy in every crash. In some crashes safe[...]

{ W ARNING: Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle's safety belt system nor its airbag system is designed for them. Y oung children a[...]

The right front passenger frontal airbag is in the instrument panel on the passenger's side. Driver Side Shown, Passenger Side Similar The seat ‐ mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door . 2-54[...]

Driver Side shown, Passenger Side similar The roof-rail airbags for the driver , right front passenger , and second row outboard passengers are in the ceiling above the side windows. { W ARNING: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injur[...]

When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver's or right front passenger's head and chest. However , they are only designed to inflate if the impact exceeds a predetermined deployment thresho[...]

The vehicle has seat ‐ mounted side impact and roof-rail airbags. See Airbag System on page 2 ‑ 51 . Seat ‐ mounted side impact and roof-rail airbags are intended to inflate in moderate to severe side crashes. In addition, these roof-rail airbags are intended to inflate during a rollover or in a severe frontal impact. Seat ‐ mounted side im[...]

Rollover capable roof-rail airbags are designed to help contain the head and chest of occupants in the outboard seating positions in the first and second rows. The rollover capable roof-rail airbags are designed to help reduce the risk of full or partial ejection in rollover events, although no system can prevent all such ejections. But airbags wou[...]

The vehicle has a feature that may automatically unlock the doors, turn on the interior lamps and hazard warning flashers, and shut off the fuel system after the airbags inflate. Y ou can lock the doors, turn off the interior lamps and hazard warning flashers by using the controls for those features. { W ARNING: A crash severe enough to inflate the[...]

Passenger Sensing System If the vehicle has the passenger airbag status indicator pictured in the following illustration, then the vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator , if equipped, is visible on the overhead console when the vehicle is started. In addition, if the veh[...]

{ W ARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger air[...]

For some children, including children in child restraints, and for very small adults, the passenger sensing system may or may not turn off the right front passenger frontal airbag, depending upon the person's seating posture and body build. Everyone in your vehicle who has outgrown child restraints should wear a safety belt properly — whethe[...]

If the Off Indicator is Lit for an Adult-Size Occupant If a person of adult-size is sitting in the right front passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, use the following steps to allow the system to detect that person and enable the right front passenger fron[...]

If the shoulder portion of the belt is pulled out all the way , the child restraint locking feature will be engaged. This may unintentionally cause the passenger sensing system to turn the airbag off for some adult size occupants. If this happens, let the belt go back all the way and start again. A thick layer of additional material, such as a blan[...]

Adding Equipment to Y our Airbag-Equipped V ehicle Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Y es. If you add things that change the vehicle's frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly . Changing [...]

Restraint System Check Checking the Restraint Systems Safety Belts Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly . Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer/r[...]

Replacing Restraint System Parts After a Crash { W ARNING: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. T o help make sure your restraint systems are working properly after a crash, have them inspected and any [...]

2 NOTES 2-68[...]

Section 3 Features and Controls Keys ........................... ..................... 3-3 Remote Keyless Entry (RKE) System . . . . . . . . . . . 3-4 Remote Keyless Entry (RKE) System O p e r a t i o n ................... ............... ... 3 - 4 Remote Vehicle Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Doors and Locks ... ..[...]

Section 3 Features and Controls Object Detection Systems .. ..................... 3-48 Ultrasonic Rear Parking Assist (URP A) . . . . . . . . 3-48 Rear Vision Camera (RVC) . . . . . . . . . . . . . . . . . . . . 3-50 Universal Home Remote System .. . ........... .. 3-54 Universal Home Remote System Operation (With Three Round LED) . . . . . . . . .[...]

Keys { W ARNING: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed [...]

Remote Keyless Entry (RKE) System See Radio Frequency Statement on page 9 ‑ 20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/21 1 of Industry and Science Canada. Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment. [...]

If enabled through the Driver Information Center (DIC), the turn signal lamps flash once to indicate locking has occurred. If enabled through the DIC, the horn chirps when Q is pressed again within three seconds. See DIC V ehicle Customization on page 4 ‑ 56 for additional information. Pressing Q arms the content theft ‐ deterrent system. See C[...]

Programming T ransmitters to the V ehicle Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer/retailer . When the replacement transmitter is programmed to this vehicle, all remaining transmitters must also be reprogrammed. Any lost or stole[...]

Remote V ehicle Start This feature allows you to start the engine from outside of the vehicle. It may also start up the vehicle's heating or air conditioning systems and rear window defogger . Normal operation of the system will return after the key is turned to the ON/RUN position. During a remote start, the climate control system will defaul[...]

3. If it is the first remote start since the vehicle has been driven, repeat these steps, while the engine is still running, to extend the engine running time by 10 minutes. Remote start can be extended one time. After entering the vehicle during a remote start, insert and turn the key to ON/RUN to drive the vehicle. T o manually shut off a remote [...]

Doors and Locks Door Locks { W ARNING: Unlocked doors can be dangerous. . Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear s[...]

Power Door Locks The power door lock switches are located on the armrest on the front doors. K (Unlock) : Press the side of the switch with the unlock symbol to unlock the doors and tailgate. Q (Lock) : Press the side of the switch with the lock symbol to lock the doors and tailgate. Delayed Locking When locking the doors with the power lock switch[...]

The rear doors must be open to access them. The label showing lock and unlock positions is located near the lock. T o set the locks, do the following: 1. Insert the key into the security lock slot and turn it so the slot is in the horizontal position. 2. Close the door . When you want to open a rear door when the security lock is on, do the followi[...]

Midgate ® { W ARNING: It can be dangerous to drive with the cargo area covered and the tailgate and the Midgate ® open because carbon monoxide (CO) gas can come into your vehicle. Y ou can not see or smell CO. It can cause unconsciousness and even death. If you must drive with the cargo covers on and the tailgate and Midgate ® open or if electri[...]

The following are the main components of the Midgate ® system: A. Latch Levers B. Grab Handles C. Glass-Catch Release Button D. Glass Lock Knobs E. Window Retaining T abs F . Midgate ® Release Handle G. Window Alignment Arrows Rear Glass Removal and Storage { W ARNING: If the removable rear glass is not stored properly , it could be thrown about [...]

2. Squeeze and pull down the latch levers (A), located near the upper corners of the rear glass, to unlatch. Once unlatched, the glass-catch release button (C) will catch the rear glass and prevent it from falling forward. 3. While holding the rear glass in place, press the glass-catch release button (C) and pull the top of the rear glass toward yo[...]

4. With the rear glass tilted toward you, lift it out from the lower window frame channel. Use the grab handles to assist you in removing the rear glass. 5. Load the rear glass into the storage pocket in the Midgate ® , guiding the lower edge of the rear glass behind the three rear glass retaining tabs (E). Hold the rear glass flat against the sto[...]

6. T urn both glass lock knobs (D), located at both top corners of the storage pocket, to the locked position. Push in on the corner of the rear glass to allow the lock knob to engage more easily . Once both glass lock knobs are in the locked position, the rear glass is securely stored. 7. Push both latch levers up to the locked position. Y ou shou[...]

Reinstalling the Rear Glass T o reinstall the rear glass, do the following: 1. Squeeze and pull down the latch levers (A), located near the upper corners of the rear glass, to unlatch. 2. Hold the rear glass in place with one hand and turn the glass lock knobs, located at both top corners of the glass storage pocket, to the unlocked position. 3. Pu[...]

Be sure to align the rear glass side-to-side using the alignment arrows (G). 5. Apply a firm downward pressure and then push the rear glass flat against the window frame. Use the grab handles at the top of the rear glass to assist you. 6. Push the rear glass flat against the window frame and push each latch lever up until it locks. Y ou should hear[...]

T o lower the Midgate ® , do the following: 1. Fold the rear seats. The front seats might have to be moved forward slightly to allow the rear seats to fold. See Rear Seat Operation on page 2 ‑ 9 for more information. Rear Glass in Normal Position 2. Standing outside of the vehicle, hold the Midgate ® securely so it does not fall forward. T urn [...]

Lowering the Midgate ® with the Rear Glass in the Storage Pocket Rear Glass Stored in Glass Storage Pocket Midgate ® Lowered with Crossbar Attached This procedure works the same as the procedure described previously , but when you lower the Midgate ® with the rear glass in the stored position, you will notice that the entire crossbar will lower [...]

Raising the Midgate ® T o return the Midgate ® to its normal position, raise the Midgate ® up with a firm swinging motion until it latches into place securely . This will help to ensure that the Midgate ® closes with enough force to engage the latches. If the rear glass is removed and you would like to put it back, do so using the instructions [...]

The switch used to disable the power assist steps is located on the center console below the climate control system. The assist steps cannot be disabled in the extended position. Windows { W ARNING: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer perma[...]

Power Windows { W ARNING: Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function and they could be seriously injured or killed if caught in the path of a closin[...]

Express-Down/Up Windows Windows with the express feature allow the windows to be raised and lowered all the way without holding the switch. Press or pull the switch fully and release it to activate the express feature. The express mode can be canceled at any time by briefly pressing or pulling the switch. Express Window Anti-Pinch Feature If any ob[...]

Programming the Power Windows If the battery on the vehicle has been recharged, disconnected, or is not working, you will need to reprogram each front power window for the express-up feature to work. Before reprogramming, replace or recharge the vehicle's battery . T o program each front window , follow these steps: 1. With the ignition in ACC[...]

Sun Visors with Fixed Rod and Pull ‐ out Extension Y our vehicle may have this feature. Pull the sun visor down to block glare. Pull the sun visor extender out for additional coverage. Detach the sun visor from the center mount and swing it to the side to cover the side window . Lighted Visor V anity Mirror Y our vehicle has lighted visor vanity [...]

3. Close all doors. The security light should go off after about 30 seconds. The alarm is not armed until the security light goes off. The content theft deterrent system does not sense if the midgate or tailgate are open or ajar , therefore, vehicle contents may not be protected if the midgate is left open or ajar . If a locked driver door is opene[...]

If the alarm does not sound when it should but the headlamps flash, check to see if the horn works. The horn fuse may be blown. T o replace the fuse, see Fuses and Circuit Breakers on page 7 ‑ 105 . If the alarm does not sound or the headlamps do not flash, the vehicle should be serviced by your dealer/retailer . P ASS-Key ® III+ Electronic Immo[...]

It is possible for the P ASS-Key ® III+ decoder to learn the transponder value of a new or replacement key . Up to 10 keys may be programmed for the vehicle. The following procedure is for programming additional keys only . If all the currently programmed keys are lost or do not operate, you must see your dealer/retailer or a locksmith who can ser[...]

Starting and Operating Y our V ehicle New V ehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: . Keep your speed at 55 mph (88 km/h) or less for the first 500 miles (805 km). . Do not drive at any one constant speed, fast or slow , for the first 500 mil[...]

Ignition Positions The ignition switch has four different positions. T o shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY and the regular brake pedal must be applied. A (LOCK/OFF) : This position locks the ignition. It may also lock the steering wheel and automatic transmission. The key can be removed in LOCK/OFF . On vehicles[...]

D (ST ART) : This is the position that starts the engine. When the engine starts, release the key . The ignition switch returns to ON/RUN for driving. A warning tone will sound when the driver door is opened, the ignition is in ACC/ACCESSORY or LOCK/OFF and the key is in the ignition. Retained Accessory Power (RAP) The following vehicle accessories[...]

The vehicle has a Computer-Controlled Cranking System. This feature assists in starting the engine and protects components. If the ignition key is turned to the ST ART position, and then released when the engine begins cranking, the engine will continue cranking for a few seconds or until the vehicle starts. If the engine does not start and the key[...]

Adjustable Throttle and Brake Pedal The vehicle has adjustable throttle and brake pedals that allow you change their positions. The feature will not operate when the vehicle is in R (Reverse) or while using the cruise control. The switch used to adjust the pedals is located on the center console below the climate control system. Press the right and[...]

W ARNING: (Continued) Y ou could be seriously injured. Plug the cord into a properly grounded three-prong 1 10-volt AC outlet. If the cord will not reach, use a heavy-duty three-prong extension cord rated for at least 15 amps. 4. Before starting the engine, be sure to unplug and store the cord as it was before to keep it away from moving engine par[...]

When parked on a hill, especially when the vehicle has a heavy load, you may notice an increase in the effort to shift out of P (Park). See T orque Lock (Automatic T ransmission) under Shifting Into Park on page 3 ‑ 41 for more information. { W ARNING: It is dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the [...]

D (Drive) : This position is for normal driving. It provides the best fuel economy . If you need more power for passing, and you are: . Going less than about 35 mph (55 km/h), push the accelerator pedal about halfway down. . Going about 35 mph (55 km/h) or more, push the accelerator all the way down. By doing this, the vehicle shifts down to the ne[...]

Driver Shift Control (DSC) The vehicle has Driver Shift Control (DSC). DSC controls the vehicle's transmission and vehicle speed while driving down hill or towing a trailer by allowing you to select a desired range of gears. T o use this feature, do the following: 1. Move the shift lever to the M (Manual Mode). 2. Press the plus/minus button, [...]

T ow/Haul Mode The vehicle has a tow/haul mode. The tow/haul mode adjusts the transmission shift pattern to reduce shift cycling, providing increased performance, vehicle control, and transmission cooling when towing or hauling heavy loads. Press the button located on the end of the shift lever to turn the tow/haul on or off. When the tow/haul is o[...]

This reduces wear on the braking system and increases control of the vehicle. Grade Braking monitors vehicle speed, acceleration, engine torque and brake pedal usage. Using this information, it detects when the vehicle is on a downhill grade and the driver desires to slow the vehicle by pressing the brake. Also see T owing a T railer on page 6 ‑ [...]

Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving. T o release the parking brake, hold the regular brake pedal down, then push down momentarily on the parking brake peda[...]

Leaving the V ehicle With the Engine Running { W ARNING: It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire. Y ou or others could b[...]

Shifting Out of Park This vehicle is equipped with an electronic shift lock release system. The shift lock release is designed to: . Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released, and . Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN or ACC/ ACCESS[...]

Engine Exhaust { W ARNING: Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: . The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody airflow or tail pipes). . The exhaust sme[...]

W ARNING: (Continued) even death. Never run the engine in an enclosed area that has no fresh air ventilation. For more information, see Engine Exhaust on page 3 ‑ 44 . { W ARNING: It can be dangerous to get out of the vehicle if the automatic transmission shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll[...]

Outside Power Foldaway Mirrors Controls for the outside power foldaway mirrors are located on the driver door armrest. Mirror Adjustment 1. Press (A) or (B) to select the driver or passenger side mirror . 2. Press one of the four arrows located on the control pad to adjust the mirror . 3. Press the opposite side to get the control pad to a neutral [...]

T urn Signal Indicator The vehicle has a turn signal indicator on the mirror . An arrow on the mirror flashes in the direction of the turn or lane change. Park Tilt Mirrors If the vehicle has the memory package, the passenger and/or driver mirror tilts to a preselected position when the vehicle is in R (Reverse). This feature lets the driver view t[...]

Object Detection Systems Ultrasonic Rear Parking Assist (URP A) For vehicles with the Ultrasonic Rear Parking Assist (URP A) system, it operates at speeds less than 8 km/h (5 mph), and assists the driver with parking and avoiding objects while in R (Reverse). The sensors on the rear bumper are used to detect the distance to an object up to 2.5 m (8[...]

The system can be disabled by pressing the rear park aid disable button located next to the radio. The indicator light will come on and P ARK ASSIST OFF displays on the Driver Information Center (DIC) to indicate that URP A is off, see DIC Warnings and Messages on page 4 ‑ 48 . Notice: If you use URP A while the tailgate is lowered, it may not de[...]

. A trailer was attached to the vehicle, or a bicycle or an object was hanging out of the tailgate during the last drive cycle. Once the attached object is removed and the tailgate is raised, URP A will return to normal operation. . A tow bar is attached to the vehicle. . The vehicle's bumper is damaged. T ake the vehicle to your dealer/retail[...]

The delay that is received after shifting out of R (Reverse) is approximately 10 seconds. The delay can be cancelled by performing one of the following: . Pressing a hard key on the navigation system. . Shifting in to P (Park). . Reach a vehicle speed of 7 mph (1 1 km/h). There is a message on the rear vision camera screen that states “ Check Sur[...]

If any other problem occurs or if a problem persists, see your dealer/retailer . { W ARNING: The Rear Vision Camera (RVC) system does not replace driver vision. RVC does not: . Detect objects that are outside the camera's field of view , below the bumper , or underneath the vehicle. . Detect children, pedestrians, bicyclists, or pets. Do not b[...]

A. View displayed by the camera. B. Corner of the rear bumper . When the System Does Not Seem T o Work Properly The rear vision camera system might not work properly or display a clear image if: . The RVC is turned off. See “ Turning the Rear Camera System On or Off ” earlier in this section. . It is dark. . The sun or the beam of headlights is[...]

Universal Home Remote System See Radio Frequency Statement on page 9 ‑ 20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/21 1 of Industry and Science Canada. Universal Home Remote System Operation (With Three Round LED) This vehicle may have the Universal Home Remote System. If there are three r[...]

Programming Universal Home Remote — Rolling Code For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to learcar2u.com. Most garage door openers sold after 1996 are Rolling Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before starting. Otherwise,[...]

3. Immediately return to the vehicle. Press and hold the Universal Home Remote button that will be used to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. This button may need to be held for up to 20 seconds. 4. Immediately , within one second, release the button when the gar[...]

T o program up to three devices: 1. T o verify that the garage door opener is a Fixed Code unit, remove the battery cover on the hand held transmitter supplied by the manufacturer of the garage door opener motor . If there are a row of dip switches similar to the graphic above, the garage door opener is a Fixed Code unit. If you do not see a row of[...]

Example of Eight Dip Switches with Three Positions The panel of switches might not appear exactly as they do in the examples above, but they should be similar . The switch positions on the hand-held transmitter could be labeled, as follows: . A switch in the up position could be labeled as “ Up, ” “ +, ” or “ On. ” . A switch in the dow[...]

4. The indicator lights will blink slowly . Enter each switch setting from Step 2 into your vehicle's Universal Home Remote. Y ou will have two and one-half minutes to complete Step 4. Now press one button on the Universal Home Remote for each switch setting as follows: . If you wrote “ Left, ” press the left button in the vehicle. . If yo[...]

Reprogramming Universal Home Remote Buttons Any of the three buttons can be reprogrammed by repeating the instructions. Erasing Universal Home Remote Buttons The programmed buttons should be erased when the vehicle is sold or the lease ends. T o erase either Rolling Code or Fixed Code on the Universal Home Remote device: 1. Press and hold the two o[...]

Center Console Storage The vehicle has a console compartment between the bucket seats. The console has both an upper and lower storage bin that can be opened by lifting up on the latches located at the front of the console lids. An accessory power outlet may be located inside the console, see Accessory Power Outlet(s) on page 4 ‑ 18 . The rear of[...]

Do not exceed the maximum vehicle capacity when loading the vehicle. For more information on vehicle capacity and loading, see Loading the Vehicle on page 6 ‑ 32 . . If small heavy objects are placed on the roof, cut a piece of 3/8 inch plywood to fit inside the crossrails and siderails to spread the load. Tie the plywood to the siderail supports[...]

T o remove a cargo panel(s): 1. Lower the tailgate. See T ailgate on page 3 ‑ 21 for more information on the tailgate. The panels are embossed on the upper center portion with the numbers 1, 2 and 3. There are also numbered labels on the bottom of the panels. The numbers on the top and bottom of the panels will be used as reference when removing,[...]

After each cargo panel is removed, store them within the cargo storage area using the cargo panel storage system. Cargo Panel Storage System The three cargo panels can be stored in the cargo area using the storage strap system. Always use the storage strap system to store the cargo panels while driving. T o store the panels: 1. Secure the storage s[...]

Use the following instructions for the proper storage sequence and location for each panel: A. Secure clip A on the secondary strap. B. Secure clip B on the secondary strap. C. Place the remaining primary straps on top of the lid and tray at the top of the cargo area. 2. Starting with cargo panel 1, load the cargo panel with the latches facing up t[...]

3. Place the primary straps over the three cargo covers (A). Fasten the four strap clips (B). 4. T ighten all straps by pulling on the free end of each strap. 3-66[...]

5. Close both cross locks at the center of the strap system to secure tightly . Panels 3, 2, 1 Loaded 3-67[...]

Reinstalling the Cargo Cover Panels The strap system can remain attached to the side of the cargo area while it is not in use, or it can be stored inside the top box storage compartment. See T op-Box Storage on page 3 ‑ 76 for more information. T o reinstall a cargo panel: 1. Starting with cargo panel 1, place the latches in the unlocked position[...]

2. The driver side cargo cover panel latch must lock in place before the passenger side latch can be locked. If this procedure is not followed exactly , the cargo cover panels might not correctly lock in place. Push the driver side latch toward the front of the vehicle to lock the cover in position. A click sounds when each latch locks. Lock the re[...]

4. Push the latches toward the front of the vehicle, starting with the driver side latch, to lock the panel in place. A click sounds when each latch locks correctly . Folding and Storage of Straps Fold the straps for storing inside the top box storage compartment: 1. Extend the six strap ends on a flat surface. 2. Fold the four primary strap ends t[...]

4. T ake the secondary strap and wrap it around the folded webbing , forming a package. Finally , attach the hooks to the webbing and place inside the top box storage compartment. Cargo Tie Downs Cargo tie downs in the rear cargo area can be used to secure cargo. All-Weather Cargo Area The vehicle's cargo area can be used in many differe nt co[...]

Even when all of these things are working properly and the cover system is on, there may be some instances (heavy rains, automated car washes, etc.) when water can collect in the following areas: A. T op drain grates B. Removable front drain grate (Midgate ® drain grate) C. Side rail channels and catch cups D. Front drains E. W ater drainage area [...]

T op Drain Grates – Removal and Cleaning The top drain grates are located near the rear window on both sides of the vehicle. Clean the grates and drains if there is a blockage. T o remove each drain grate: 1. Remove the cargo panels. See Cargo Cover Panels on page 3 ‑ 62 for more information. 2. Grasp the edges of the grate and pull it out from[...]

T o replace the drain grate: 1. Line up the clips on the vehicle with the slots in the grate and firmly push the grate down. Do not force the grate. If it will not clip into place, realign the clips with the holes and try again. Side Rail Channels The side rail channels are located on top of both sides of the cargo area. They may need to be flushed[...]

Midgate ® Drain Grate Removal and Cleaning The removable Midgate drain grate is located near the base of the Midgate. After hauling dirt, wood chips, pebbles etc. the Midgate drain should be flushed with water . First remove the drain grate by using the following steps: 1. Lower the Midgate. See Midgate ® on page 3 ‑ 12 for more information. 2.[...]

Cargo Area Floor Drains The cargo mat has cut-outs for the four cargo-area floor drains, located near the sides of the cargo area. Flush the drains periodically through the cutouts to clear debris and to allow water to drain from the cargo area. If the cargo area is extremely dirty , lift up the edges of the cargo floor mat or take the whole mat ou[...]

Sunroof Y our vehicle may be equipped with a power sliding sunroof. T o open or close the sunroof, the ignition needs to be turned to ON/RUN, or Retained Accessory Power (RAP) must be active. When RAP is active, the sunroof will work for 10 minutes after the ignition is turned off, or until a front door is opened. See Retained Accessory Power (RAP)[...]

The sunroof has a comfort stop feature which stops the sunroof from opening to the full-open position. From the comfort stop position, press the rear of the driver's side switch a second time to open the sunroof to the full-open position. When the sunroof is opened, an air deflector will automatically raise. The air deflector will retract when[...]

Section 4 Instrument Panel Instrument Panel Overview ........ ........... ..... 4-3 Hazard W arning Flashers . . . . . . . . . . . . . . . . . . . . . . . 4-3 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 T ilt Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 [...]

Section 4 Instrument Panel Antilock Brake System (ABS) Warning Light . . . 4-32 StabiliT rak ® Indicator Light . . . . . . . . . . . . . . . . . . . . . 4-32 Engine Coolant T emperature Gage . . . . . . . . . . . . 4-33 T ire Pressure Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33 Malfunction Indicator Lamp . . . . . . . . . . [...]

Instrument Panel Overview Hazard W arning Flashers | (Hazard W arning Flasher): Press this button located on top of the steering column, to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press again to turn the flashers off. When the hazard warning flashers are on, the vehicle's turn [...]

T urn Signal/Multifunction Lever The lever on the left side of the steering column includes the following: G : T urn and Lane Change Signals 5 3 : Headlamp High/Low-Beam Changer N : Windshield Wipers L : Windshield W asher Flash-to-Pass. Exterior Lamps. Information for these features is on the pages following. T urn and Lane-Change Signals An arrow[...]

T urn Signal On Chime If the turn signal is left on for more than 3/4 of a mile (1.2 km), a chime sounds at each flash of the turn signal and the message TURN SIGNAL ON also appears in the DIC. See DIC Warnings and Messages on page 4 ‑ 48 . T o turn the chime and message off, move the turn signal lever to the off position. Headlamp High/Low-Beam [...]

Windshield Wipers The windshield wipers are controlled by turning the band with z on it. 8 (Mist): For a single wiping cycle, turn the band to mist. Hold it there until the wipers start, then release. For more wipes, hold the band on mist longer . 6 (Delay): The wiper speed can be set for a long or short delay between wipes. T urn the band up or do[...]

Cruise Control { W ARNING: Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use the cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause excessive wheel slip, and you could lose control. Do not use cru[...]

Cruise Control shown with Heated Steering Wheel Button (If Equipped) The cruise control buttons are located on left side of the steering wheel. T (On/Off): Turns the system on or off. The indicator light is on when cruise control is on and turns off when cruise control is off. + RES (Resume/Accelerate) : Press to make the vehicle accelerate or resu[...]

Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied, this shuts of f the cruise control. But it does not need to be reset. Once the vehicle speed reaches about 40 km/h (25 mph) or more, press the +RES button on the steering wheel. The vehicle returns to the previously set speed and stays there. Incre[...]

Using Cruise Control on Hills How well the cruise control will work on hills depends upon the vehicle speed, load, and the steepness of the hills. When going up steep hills, you might have to step on the accelerator pedal to maintain the vehicle's speed. When going downhill, you might have to brake or shift to a lower gear to keep the vehicle&[...]

AUTO (Automatic) : Automatically turns on the headlamps at normal brightness, together with the following: . Parking Lamps . Instrument Panel Lights . T aillamps . License Plate Lamps ; (Parking Lamps) : T urns on the parking lamps together with the following: . Instrument Panel Lights . T aillamps . License Plate Lamps 2 (Headlamps) : T urns on th[...]

T urning On and Enabling IntelliBeam ® Press and release the IntelliBeam ® button on the inside rear view mirror . The IntelliBeam ® indicator on the mirror will turn on to let you know the system has been turned on. Once the system has been turned on, it will remain on each time the vehicle is started. Additionally , the IntelliBeam ® system m[...]

IntelliBeam ® may not turn off the high-beams if the system cannot detect other vehicle's lamps because of any of the following: . The others vehicle's lamp(s) are missing, damaged, obstructed from view or otherwise undetected. . The other vehicle's lamp(s) are covered with dirt, snow and/or road spray . . The other vehicle's l[...]

Cleaning the IntelliBeam ® Light Sensor The light sensor is located on the inside of the vehicle in front of the inside rearview mirror . Clean the light sensor window , periodically , using glass cleaner on a soft cloth. Gently wipe the sensor window . Do not spray glass cleaner directly on the surface of the sensor window . Headlamps on Reminder[...]

When it begins to get dark, the automatic headlamp system switches from DRL to the headlamps. T o turn off the DRL lamps, turn the exterior lamps control to the OFF position and then release. For vehicles first sold in Canada, the transmission must be in the P (Park) position, before the DRL lamps can be turned off. Automatic Headlamp System When i[...]

Fog Lamps For vehicles with fog lamps, they can be used for better vision in foggy or misty conditions. The parking lamps and/or low-beam headlamps must be on for the fog lamps to work. The fog lamp button is located on the left side of the instrument panel. # (Fog Lamps): Press to turn the fog lamps on or off. An indicator light comes on in the in[...]

Dome Lamps The dome lamps come on when any door is opened. They turn off after all the doors are closed. The dome lamps can also be turned on by turning the instrument panel brightness knob, located on the instrument panel to the left of the steering column, clockwise to the farthest position. In this position, the dome lamps remain on whether a do[...]

A high electrical load occurs when several of the following are on, such as: headlamps, high beams, fog lamps, rear window defogger , climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets. EPM works to prevent excessive discharge of the battery . It does this by balancing[...]

Certain electrical accessories may not be compatible with the accessory power outlet and could result in blown vehicle or adapter fuses. If you experience a problem see your dealer/retailer for additional information on accessory power outlets. The accessory power outlets are powered, even when the ignition is in LOCK/OFF . Continuing to use power [...]

Analog Clock The analog clock is located on the instrument panel above the radio. The clock is not connected with any other vehicle system and runs by itself. T o adjust the clock: 1. The adjustment button is located in the lower left corner of the clock. 2. Push and hold the adjustment button to advance the clock hands. Holding the button down wil[...]

The temperature can also be adjusted using either temperature knob. Press the up or down arrows on the fan switch, the defrost button, the AUTO button, driver side temperature knob, or the air conditioning button to turn the system on when it is off. Driver and Passenger Side T emperature Knob The driver and passenger side temperature knobs are use[...]

2. Set the driver's and passenger's temperature. T o find your comfort setting, start with a 23°C (74°F) temperature setting and allow about 20 minutes for the system to regulate. Use the driver or passenger temperature buttons to adjust the temperature setting as necessary . If a temperature setting of 15°C (60°F) is chosen, the syst[...]

6 (Floor): Air is directed to the floor outlets, with some to the windshield, side window outlets, and second row floor outlets. In this mode, the system automatically selects outside air . - (Defog): This mode clears the windows of fog or moisture. Air is directed to the windshield, floor outlets, and side window vents. In this mode, the system tu[...]

@ (Recirculation): Press to turn the recirculation mode on or off. An indicator light comes on to show that the recirculation is on. This mode recirculates and helps to quickly cool the air inside the vehicle. It can be used to help prevent outside air and odors from entering the vehicle. The recirculation mode cannot be used with floor , defog, or[...]

Operation Tips . Keep the hood and front air inlets free of ice, snow , or any other obstruction, such as leaves. The heater and defroster will work far better , reducing the chance of fogging the inside of your windows. . Keep the air path under the front seats clear of objects. This helps air to circulate throughout your vehicle. . Adding outside[...]

Instrument Panel Cluster United States version shown, Canada similar . 4-26[...]

Speedometer and Odometer The speedometer shows the vehicle's speed in both miles per hour (mph) and kilometers per hour (km/h). The odometer works together with the Driver Information Center (DIC). Press the Trip/Fuel button on the instrument panel cluster to check the odometer mileage while the vehicle is not running. See “ Odometer ” und[...]

Passenger Safety Belt Reminder Light For vehicles equipped with the passenger safety belt reminder light, several seconds after the engine is started, a chime sounds for several seconds to remind the front passenger to buckle their safety belt. The passenger safety belt light, located on the overhead console, comes on and stays on for several secon[...]

{ W ARNING: If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly . The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. T o help avoid injury , have the vehicle serviced right away . If there is a proble[...]

Then, after several more seconds, the status indicator will light either ON or OFF , or either the on or of f symbol to let you know the status of the right front passenger frontal airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator , it means that the right front passenger frontal airbag is enabled (may inflate)[...]

Brake System W arning Light With the ignition on, the brake system warning light comes on when the parking brake is set. If the vehicle is driven with the parking brake engaged, a chime sounds when the vehicle speed is greater than 3 mph (5 km/h). The vehicle's hydraulic brake system is divided into two parts. If one part is not working, the o[...]

Antilock Brake System (ABS) W arning Light For vehicles with the Antilock Brake System (ABS), this light comes on briefly when the engine is started. If it does not, have the vehicle serviced by your dealer/ retailer . If the system is working normally the indicator light then goes off. If the ABS light stays on, turn the ignition off. If the light[...]

Engine Coolant T emperature Gage This gage shows the engine coolant temperature. If the indicator on the gage moves towards the shaded area on the thermostat, it means that the engine coolant has overheated. If the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle and turn off the engine as soon as poss[...]

When the Light Flashes First and Then is On Steady This indicates that there may be a problem with the Tire Pressure Monitor System. The light flashes for about a minute and stays on steady for the remainder of the ignition cycle. This sequence repeats with every ignition cycle. See Tire Pressure Monitor Operation on page 7 ‑ 67 for more informat[...]

This light comes on during a malfunction in one of two ways: Light Flashing : A misfire condition has been detected. A misfire increases vehicle emissions and could damage the emission control system on the vehicle. Diagnosis and service might be required. T o prevent more serious damage to the vehicle: . Reduce vehicle speed. . Avoid hard accelera[...]

. Make sure to fuel the vehicle with quality fuel. Poor fuel quality causes the engine not to run as efficiently as designed and can cause: stalling after start-up, stalling when the vehicle is changed into gear , misfiring, hesitation on acceleration, or stumbling on acceleration. These conditions might go away once the engine is warmed up. If one[...]

Oil Pressure Light { W ARNING: Do not keep driving if the oil pressure is low . The engine can become so hot that it catches fire. Someone could be burned. Check the oil as soon as possible and have the vehicle serviced. Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty . A[...]

Fog Lamp Light The fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps on page 4 ‑ 16 for more information. Lights On Reminder This light comes on whenever the parking lamps are on. See Exterior Lamps on page 4 ‑ 10 for more information. Cruise Control Light The cruise contr[...]

T ow/Haul Mode Light For vehicles with the tow/ haul mode feature, this light comes on when the T ow/Haul mode has been activated. For more information, see T ow/Haul Mode on page 3 ‑ 39 . Fuel Gage When the ignition is on, the fuel gage shows about how much fuel the vehicle has left in the tank. An arrow on the fuel gage indicates the side of th[...]

All messages will appear in the DIC display located in the center of the instrument panel cluster . The DIC comes on when the ignition is on. After a short delay , the DIC will display the information that was last displayed before the engine was turned off. See DIC Operation and Displays on page 4 ‑ 40 and DIC V ehicle Customization on page 4 ?[...]

U (Customization): Press this button to customize the feature settings on your vehicle. See DIC V ehicle Customization on page 4 ‑ 56 for more information. V (Set/Reset): Press this button to set or reset certain functions and to turn off or acknowledge messages on the DIC. T rip/Fuel Menu Items 3 (T rip/Fuel): Press this button to scroll through[...]

Fuel Used Press the trip/fuel button until FUEL USED displays. This display shows the number of gallons (gal) or liters (L) of fuel used since the last reset of this menu item. T o reset the fuel used information, press and hold the set/reset button while FUEL USED is displayed. Timer Press the trip/fuel button until TIMER displays. This display ca[...]

V ehicle Information Menu Items T (V ehicle Information): Press this button to scroll through the following menu items: Oil Life Press the vehicle information button until OIL LIFE REMAINING displays. This display shows an estimate of the oil's remaining useful life. If you see 99% OIL LIFE REMAINING on the display , that means 99% of the curr[...]

Tire Pressure On vehicles with the Tire Pressure Monitor System (TPMS), the pressure for each tire can be viewed in the DIC. The tire pressure will be shown in either pounds per square inch (psi) or kilopascals (kPa). Press the vehicle information button until the DIC displays FRONT TIRES PSI (kPa) LEFT ## RIGHT ##. Press the vehicle information bu[...]

Relearn Remote Key This display allows you to match Remote Keyless Entry (RKE) transmitters to your vehicle. This procedure will erase all previously learned transmitters. Therefore, they must be relearned as additional transmitters. T o match an RKE transmitter to your vehicle: 1. Press the vehicle information button until PRESS V TO RELEARN REMOT[...]

DIC Compass Y our vehicle may have a compass in the Driver Information Center (DIC). Compass Zone The zone is set to zone eight upon leaving the factory . Y our dealer/retailer will set the correct zone for your location. Under certain circumstances, such as during a long distance cross-country trip or moving to a new state or province, it will be [...]

Compass Calibration The compass can be manually calibrated. Only calibrate the compass in a magnetically clean and safe location, such as an open parking lot, where driving the vehicle in circles is not a danger . It is suggested to calibrate away from tall buildings, utility wires, manhole covers, or other industrial structures, if possible. If CA[...]

DIC W arnings and Messages Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appear one after another . Some messages may not require immediate action, but you can press any of the DIC buttons on the instr[...]

ENGINE HOT A/C (Air Conditioning) TURNED OFF This message displays when the engine coolant becomes hotter than the normal operating temperature. See Engine Coolant T emperature Gage on page 4 ‑ 33 . T o avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the [...]

ENGINE POWER IS REDUCED This message displays and a chime sounds when the cooling system temperature gets too hot and the engine further enters the engine coolant protection mode. See Engine Overheating on page 7 ‑ 33 for further information. This message also displays when the vehicle's engine power is reduced. Reduced engine power can affe[...]

This message displays if low oil pressure levels occur . Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have your vehicle serviced by your dealer/retailer . See Engine Oil on page 7 ‑ 15 . P ARKING ASSIST BLOCKED SEE OWNERS MANUAL [...]

RIGHT REAR DOOR OPEN This message displays and a chime sounds if the passenger side rear door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstructions, and close the door again. Check to see if the message still appears on the DIC. SERVICE AIR BAG This message displays if there i[...]

SERVICE ST ABILITRAK If your vehicle has StabiliTrak ® and this message displays, it means there may be a problem with the StabiliT rak system. If you see this message, try to reset the system. Stop; turn off the engine for at least 15 seconds; then start the engine again. If this message still comes on, it means there is a problem. Y ou should se[...]

However , you should turn StabiliT rak off if your vehicle gets stuck in sand, mud, ice, or snow and you want to rock your vehicle to attempt to free it, or if you are driving in extreme off-road conditions and require more wheel spin. See If Y our V ehicle is Stuck in Sand, Mud, Ice, or Snow on page 6 ‑ 30 . T o turn the StabiliT rak system on o[...]

The low tire pressure warning light will also come on. See Tire Pressure Light on page 4 ‑ 33 . Y ou can receive more than one tire pressure message at a time. T o read the other messages that may have been sent at the same time, press the set/reset button. If a tire pressure message appears on the DIC, stop as soon as you can. Have the tire pres[...]

DIC V ehicle Customization Y our vehicle may have customization capabilities that allow you to program certain features to one preferred setting. Customization features can only be programmed to one setting on the vehicle and cannot be programmed to a preferred setting for two different drivers. All of the customization options may not be available[...]

FRANCAIS : All messages will appear in French. ESP ANOL : All messages will appear in Spanish. ARABIC : All messages will appear in Arabic. CHINESE : All messages will appear in Chinese. NO CHANGE : No change will be made to this feature. The current setting will remain. T o select a setting, press the set/reset button while the desired setting is [...]

NO CHANGE : No change will be made to this feature. The current setting will remain. T o select a setting, press the set/reset button while the desired setting is displayed on the DIC. REMOTE DOOR LOCK This feature allows you to select the type of feedback you will receive when locking the vehicle with the Remote Keyless Entry (RKE) transmitter . Y[...]

NO CHANGE : No change will be made to this feature. The current setting will remain. T o select a setting, press the set/reset button while the desired setting is displayed on the DIC. DELA Y DOOR LOCK This feature allows you to select whether or not the locking of the vehicle's doors and tailgate will be delayed. When locking the doors and ta[...]

NO CHANGE : No change will be made to this feature. The current setting will remain. T o select a setting, press the set/reset button while the desired setting is displayed on the DIC. APPROACH LIGHTING This feature allows you to select whether or not to have the exterior lights turn on briefly during low light periods after unlocking the vehicle u[...]

CHIME VOLUME This feature allows you to select the volume level of the chime. Press the customization button until CHIME VOLUME appears on the DIC display . Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: NORMAL : The chime volume will be set to a[...]

EASY EXIT RECALL If your vehicle has this feature, it allows you to select your preference for the automatic easy exit seat feature. See Memory Features on page 2 ‑ 6 for more information. Press the customization button until EASY EXIT RECALL appears on the DIC display . Press the set/reset button once to access the settings for this feature. The[...]

MEMOR Y SEA T RECALL This feature allows you to select your preference for the remote memory seat recall feature. See Memory Features on page 2 ‑ 6 for more information. Press the customization button until MEMORY SEA T RECALL appears on the DIC display . Press the set/reset button once to access the settings for this feature. Then press the cust[...]

DISPLA Y DIGIT AL SPEED This feature allows you to enable or disable the digital speedometer on the DIC. Press the customization button until DISPLA Y DIGIT AL SPEED appears on the DIC display . Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: OFF [...]

EXIT FEA TURE SETTINGS This feature allows you to exit the feature settings menu. Press the customization button until PRESS V TO EXIT FEA TURE SETTINGS appears in the DIC display . Press the set/reset button once to exit the menu. If you do not exit, pressing the customization button again will return you to the beginning of the feature settings m[...]

Audio System(s) Read the following pages to become familiar with the audio system's features. { W ARNING: T aking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others. Do not give extended attention to entertainment tasks while driving. This system provides access to many audio and non a[...]

V oice Recognition The Bluetooth system uses voice recognition to interpret voice commands to dial phone numbers and name tags. Noise : Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise. When to Speak : A short tone sounds after the system responds indicating when it is waitin[...]

. The in ‐ vehicle Bluetooth system automatically links with the first available paired cell phone in the order the phone was paired. . Only one paired cell phone can be connected to the in ‐ vehicle Bluetooth system at a time. . Pairing should only need to be completed once, unless changes to the pairing information have been made or the phone[...]

Deleting a Paired Phone 1. Press and hold b g for two seconds. The system responds with “ Ready ” followed by a tone. 2. Say “ Bluetooth ” . The system responds with “ Bluetooth ready ” followed by a tone. 3. Say “ Delete ” . The system asks which phone to delete followed by a tone. 4. Say the name of the phone to be deleted. If the[...]

If the number is correct, say “ Y es ” . If the number is not correct, say “ No ” . The system will ask for the number to be re ‐ entered. 4. After the system stores the phone number , it responds with “ Please say the name tag ” followed by a tone. 5. Say a name tag for the phone number . The name tag is recorded and the system respo[...]

Using the Directory Command The directory command lists all of the name tags stored by the system. T o use the directory command: 1. Press and hold b g for two seconds. The system responds with “ Ready ” followed by a tone. 2. Say “ Directory ” . The system responds with “ Directory ” and then plays back all of the stored name tags. Whe[...]

Making a Call Calls can be made using the following commands: . Dial . Digit Dial . Call . Re ‐ dial Using the Dial Command 1. Press and hold b g for two seconds. The system responds with “ Ready ” followed by a tone. 2. Say “ Dial ” . The system responds with “ Dial using <phone name> ” . “ Number please ” followed by a ton[...]

3. Say the name tag of the person to call. . If the system clearly recognizes the name tag it responds with “ OK, calling, <name tag> ” and dials the number . . If the system is unsure it recognizes the right name tag, it confirms the name tag followed by a tone. If the name tag is correct, say “ Y es ” . The system responds with “ [...]

Three ‐ W ay Calling Three ‐ W ay Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press b g . The system responds with “ Ready ” followed by a tone. 2. Say “ Three ‐ way call ” . The system responds with “ Three ‐ way call, please say dial or call ” . 3. Us[...]

T o T ransfer Audio to the In-V ehicle Bluetooth System The cellular phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the key is turned to the ON/RUN or ACC/ACCESSORY position. During a call with the audio on the cell phone, press b g for more than[...]

Sending a Stored Name T ag During a Call 1. Press b g . The system responds with “ Ready ” followed by a tone. 2. Say “ Send name tag. ” The system responds with “ Say a name tag to send tones ” followed by a tone. 3. Say the name tag to send. . If the system clearly recognizes the name tag it responds with “ OK, Sending <name tag&[...]

Rear Seat Entertainment (RSE) System The vehicle may have an DVD Rear Seat Entertainment (RSE) system. The RSE system works with the vehicle's audio system. The DVD player is part of the front radio. The RSE system includes a radio with a DVD player , a video display screen, audio/video jacks, two wireless headphones, and a remote control. See[...]

Push the power button to turn on the headphones. An indicator light located on the headphones comes on. If the light comes on but, there is intermittent sound and/or static on the headphones, or if the indicator light does not come on, the batteries might need to be replaced. See “ Battery Replacement ” later in this section for more informatio[...]

Audio/Video (A/V) Jacks The A/V jacks are located on the rear of the floor console. The A/V jacks allow audio or video signals to be connected from an auxiliary device such as a camcorder or a video game unit to the RSE system. Adapter connectors or cables (not included) may be required to connect the auxiliary device to the A/V jacks. Refer to the[...]

How to Change the RSE Video Screen Settings The screen display mode (normal, full, and zoom), screen brightness, and setup menu language can be changed from the on screen setup menu. T o change any feature, perform the following: 1. Press the z button on the remote control. 2. Use the remote control Q , R , q , r navigation arrows and the r button [...]

The overhead console contains the IR transmitters for the wireless headphones and the IR receivers for the remote control. They are located at the rear of the console. Notice: A void directly touching the video screen, as damage may occur . See “ Cleaning the Video Screen ” later in this section for more information. Remote Control T o use the [...]

Q , R , q , r (Menu Navigation Arrows): Use the arrow buttons to navigate through a menu. r (Enter): Press to select the choice that is highlighted in any menu. z (Display Menu): Press to adjust the brightness, screen display mode (normal, full, or zoom), and display the language menu. q (Return): Press to exit the current active menu and return to[...]

{ (Subtitles): Press to turn ON/OFF subtitles and to move through subtitle options when a DVD is playing. The format and content of this function varies for each disc. AUX (Auxiliary) : Press to switch the system between the DVD player and an auxiliary source. If your vehicle has a third row video screen, the AUX button controls the source display [...]

Tips and T roubleshoo ting Chart Problem Recommended Action No power . The ignition might not be turned ON/RUN or in ACC/ACCESSORY . The picture does not fill the screen. There are black borders on the top and bottom or on both sides or it looks stretched out. Check the display mode settings in the setup menu by pressing the display menu button on [...]

Tips and T roubleshoo ting Chart (cont'd) Problem Recommended Action I lost the remote and/or the headphones. See your dealer/retailer for assistance. The DVD is playing, but there is no picture or sound. Check that the RSE video screen is sourced to the DVD player . DVD Display Error Messages The DVD display error message depends on which rad[...]

For example, rear seat passengers can control and listen to a CD through the headphones, while the driver listens to the radio through the speakers. The rear seat passengers have control of the volume for each set of headphones. The radio functionality is controlled by both the RSA and the front radio. Only one band can be tuned to at one time. Cha[...]

© ¨ (Seek): When listening to FM, AM, or XM (if equipped), press the seek arrows to go to the previous or to the next station or channels and stay there. This function is inactive, with some radios, if the front seat passengers are listening to the radio. Press and hold either seek arrow until the display flashes, to tune to an individual station[...]

Audio Steering Wheel Controls V ehicles with audio steering wheel controls could differ depending on the vehicle's options. Some audio controls can be adjusted at the steering wheel. w / x (Next / Previous): Press to select preset or favorite radio stations, select tracks/chapters on a CD/DVD, or to navigate an iPod ® or USB device. T o selec[...]

T o scan available radio stations: 1. Press and hold ¨ until a beep is heard, to place the radio into SCAN mode, a station will play for five seconds before moving to the next station. 2. T o stop the SCAN function, press ¨ again. While listening to a CD press and release ¨ to select the next disc. + e − e (V olume): Press to increase or to de[...]

AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other . For better radio reception, most AM radio stations boost the power levels during the day , and then reduce these levels during the night. Static can also occur when things like storms and power[...]

Section 5 Navigation System Overview ................ ........................... 5-2 Navigation System Overview . . . . . . . . . . . . . . . . . . . . 5-2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Cleaning the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 1 Features and Controls . [...]

Overview Navigation System Overview Screen shown with Map Disc Inserted 5-2[...]

A. FULL MAP T ouch Screen Button. See “ NA V ” under “ Hard Keys ” under Using the Navigation System on page 5 ‑ 12 for more information. B. No GPS Symbol. See Symbols on page 5 ‑ 17 for more information. C. North Up/Heading Up Symbol. See Symbols on page 5 ‑ 17 for more information. D. Map Scale. See “ Map Scales ” under Maps on [...]

T . POI (Point of Interest) T ouch Screen Button. See “ Displaying Points of Interest (POI) on the Map Screen ” under Symbols on page 5 ‑ 17 for more information. U. 1 (Zoom Out) T ouch Screen Button. See “ Map Scales ” under Maps on page 5 ‑ 14 for more information. V . y © ¨ z (Seek) Key (Previous/Next). See Navigation Audio System [...]

. Set up the navigation features before beginning driving, such as entering an address or a preset destination. . Set up your phone numbers in advance so they can be called easily with the press of a single button or a single voice command (for navigation systems equipped with phone capability). { W ARNING: T aking your eyes off the road too long o[...]

When the navigation system is turned on, a screen may appear with the information below , and you must read and acknowledge the information it contains. { W ARNING: T aking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others. T o help avoid a crash in which you or others could be killed: . A[...]

Language — English/Metric T o change the language of the navigation screens, see Driver Information Center (DIC) on page 4 ‑ 39 for more information. T o change the navigation screens from English or metric, see DIC Operation and Displays on page 4 ‑ 40 for more information. Deleting Personal Information This navigation system can record and [...]

Setting the Clock The navigation system time and the analog clock operate independently . Changing the time through the navigation system does not change the time on the analog clock. See Analog Clock on page 4 ‑ 20 to change the analog clock time. T o set the time for the navigation system: 1. Press the CONFIG key to enter the configure menu opt[...]

9. Once a city has been selected the Street name category is automatically selected for entry . If five or less streets are available for the selected city , the system displays the list of streets. If more than five streets are available the system displays the alpha keyboard. Start entering the street name. If five or less names are available, a [...]

9. Select the Go screen button next to the POI. A map screen, with the destination marked appears. 10. Select the route preference (Fastest, Shortest, or Other). The system calculates and highlights the route. 1 1. Select the Start Guidance screen button. The route is now ready to be started. See “ Point of Interest (POI) ” under Destination on[...]

Using Y our Stored Preset Destinations These destinations are available for selection while driving. 1. If the radio is already on with a map disc inserted, skip to Step 5. 2. Press O to turn the system on. 3. Insert the DVD map disc. See “ Installing the Map DVD ” under Maps on page 5 ‑ 14 for more information. 4. A caution may appear . T ou[...]

Features and Controls Using the Navigation System This section presents basic information needed to operate the navigation system. Use the hard keys located on the navigation system along with the available touch-sensitive screen buttons on the navigation screen to operate the system. See Navigation System Overview on page 5 ‑ 2 for more informat[...]

F A V (Favorite) : Press to access the preset stations. See “ Storing Radio Station Presets ” under Navigation Audio System on page 5 ‑ 59 for more information. 5 (Phone): Press to access calling through OnStar ® . See the OnStar ® owner guide and Bluetooth ® on page 4 ‑ 66 for more information. e (Sound): Press to access the Sound scree[...]

Alpha-Numeric Keyboard Letters of the alphabet, symbols, punctuation, and numbers, when available, displays on the navigation screen as an alpha or numeric keyboard. The alpha keyboard displays when the system requires entry of a city or street name. All characters are touch-sensitive screen buttons. T ouch a character to select it. A-Y (Accent Alp[...]

The navigation system informs through voice prompts when you are traveling into a limited guidance area where route guidance is not available. The street maps and the directional arrow displayed on the navigation system can then be used to determine the remaining route to your destination. Installing the DVD Map Disc When a DVD Map Disc is installe[...]

Ejecting the DVD Map Disc Z (DVD Map Disc Eject): Press twice to eject the DVD map disc. This button is located next to the upper disc slot. Handling the DVD Map Disc When handling the DVD map disc, be careful of the following: . Handle the disc very carefully to avoid contamination or flaws. Signals may not read out properly if the disc gets conta[...]

Move your finger in any direction on the map screen and the map continues to scroll in that direction until you remove your finger from the screen. If scrolling while the vehicle is in P (Park), the system scrolls initially at a slower rate. It increases if you continue touching the map screen. If scrolling while the vehicle is in motion, there is [...]

The stopover symbol displays on the map after a stopover has been added to the route. The stopover symbols are numbered one through three, depending on how many stopovers have been set. The distance to destination symbol indicates the distance to the final destination. This symbol appears when the time to the destination is not available or while y[...]

The north up symbol indicates the map with North Up, known as North Up mode. While in North Up mode, the vehicle icon follows the north direction on the map regardless of which direction the vehicle is traveling. Select this screen symbol to switch between North Up, Heading Up, and 3 – D view modes. The heading up symbol indicates that the vehicl[...]

Displaying Points of Interest (POI) on the Map Screen Select the POI screen button to display or delete POI icons from the map. Displaying POI icons on the map shows where POIs (e.g. restaurants, gas stations, etc.) are located. This screen appears after selecting the POI screen button. 1. Select one of the POI categories to display the POI icon at[...]

POI Close to: 1. Once a category has been selected, touch this button to display the list of available POIs for the selected POI category . The list provides the POI icon, the name, the direction, and the distance to the POI from the vehicle's current position. 2. Use the scroll arrows to move up and down the list. 3. Use the sorting screen bu[...]

Driving on a Route When driving on a routed destination, the map screen automatically displays the next maneuver . The pop-up displays the next maneuver direction and the distance from it. When approximately 1/4 mi (400 m) from the next maneuver , the screen displays the name and a detailed view of it. 5-22[...]

3 – D Lane Guidance Some major metropolitan areas may include a 3 – D lane guidance feature for highway exits and junctions. This feature gives you an enhanced representation of the exits and junctions on the route. Cities that include this feature are New Y ork, Los Angeles, Chicago, Detroit, and San Francisco, and may also include Philadelphi[...]

Destination Press the DEST key to access the Destination Entry screen. From this screen, you can select from several options to plan a route by entering destination points. T o enter a destination, choose from one of the following destination entry methods: Address Entry 2 Address Entry: Enter either a city or street to use the address entry destin[...]

3. Select the state/province screen button, if needed, to change the current state or province. A list of all of the available states and provinces appear . Select the state or province. 4. Once a state or province has been selected the City name category is automatically selected for entry . Enter the City Name or touch the Last 5 Cities screen bu[...]

The Last 5 Streets screen displays a list of the last five street names that had been entered. Select a street from the list and it appears in the Street name area. If using the alpha keyboard, finish entering the street name. If five or less names are available, a list displays. If more than five are available, the List screen button displays a nu[...]

5. Once a street has been selected, select the Cross Street screen button and start entering the cross street name. If five or less names are available, a list displays. If more than five are available, the List screen button displays a number . This number represents the number of available streets. Select this button to view the list and select a[...]

T o use the point of interest destination entry method by entering the name: 1. Press the DEST hard key . 2. Select the i screen button. 3. Select the state/province screen button, if needed, to change the current state or province. A list of all of the available states and provinces appear . Select the state or province. 4. Enter the POI name. If [...]

Address Book The address book entry method lets you select a destination by selecting an address that has been stored in the address book. g Address Book: T ouch to access the Address Book screen. From this screen an address that already exists can be selected as the destination. T o use the address book entry method: 1. Press the DEST hard key . 2[...]

Previous Destination The previous destination entry method lets you select a destination from a list of previous destination points. / Previous Destination: T ouch to access the Previous Destination screen. The system stores up to 20 points that have been previously entered. As new destinations are entered, the system automatically deletes the olde[...]

From Map This destination entry method allows you to select a destination by scrolling on the map. ) From Map: T ouch to enter the From Map destination entry method. T o use this destination entry method: 1. Press the DEST hard key . 2. Select the ) screen button. A map screen displays with the scrolling symbol. 3. Use the 0 / 1 screen buttons and [...]

Map Coordinates The coordinates destination entry method lets you select a destination by entering latitude and longitude coordinates. Map Coordinates : T ouch to access the Coordinates Entry screen. T o use the coordinates destination entry method: 1. Press the DEST hard key . 2. Select the From Map screen button. 3. Select the Map Coordinates scr[...]

Preset Destination The preset destination entry method lets you set a destination by selecting from one of five previously stored destinations. Besides voice tagged destinations, these are the only destinations available to set while the vehicle is moving. If a destination is not set for one of the screen buttons, the button is dimmed and not avail[...]

Map Destination Screen Functions If the map screen is used to show destination, it will have map screen capabilities such as Go, Mark, Zoom, Scroll, etc. The address is shown at the top of the screen. Destination Map Screen OnStar ® Destination Download OnStar ® Destination Download (if equipped) is a service available for OnStar* subscribers tha[...]

OnStar Download Screen . Select Go, the navigation system calculates route(s). Select a route (i.e. Shortest Route), and Start Guidance. . Select Map, the navigation system displays the Destination Map Screen. . Select Call, the navigation system initiates a call to your destination with your Bluetooth phone (if available) or OnStar Hands-Free Call[...]

Previous Destinations Previous OnStar Destination Downloads are saved under Previous Destinations in the navigation system where they can be accessed or saved to the address book. Important Notes regarding OnStar Destination Download: . If the navigation system is turned off when the destination download is attempted, the navigation system will aut[...]

Getting Started on Y our Route Once a destination has been entered, there are several functions that can be performed. Press the DEST hard key to access the Route screen. T urn List T urn List : T ouch to view the list of turn maneuvers for the entire route and to avoid turns on the route. r / q (Scroll Arrows): T ouch the up and down arrows to scr[...]

Route Preview : Select to preview the entire route in either direction. t (Reverse Skip) : Select to go back to the start point or previous stopover . q / r (Reverse Scroll): Select to scroll to the start point or previous stopover . The t (reverse skip) button changes to a fast reverse screen button. j (Pause): Select to pause the route preview , [...]

Add Stopover Add Stopover : Select this screen button from the Route screen. This feature allows up to three stopovers to be added to the current route between the start point and final destination. Once a stopover has been added, the points can be edited or deleted. T o add a stopover: 1. Press the DEST hard key . 2. Select the Add Stopover screen[...]

T o delete a stopover from the current route: 1. Press the DEST hard key . 2. Select the Delete screen button for the desired stopover to delete. 3. The system displays a pop-up confirmation message. T ouch Y es to delete the stopover; touch No to cancel this operation. 4. Select the route preference (Fastest, Shortest, or Other). The system calcul[...]

Adding or Changing Preset Destinations This feature allows additions or changes one of five preset destinations. When a destination has been added as a preset destination, it is available to select from the Destination Entry screen. See “ Preset Destination ” previously for information on how to select a preset destination as a final destinatio[...]

Configure Menu Press the CONFIG (Configure) hard key to adjust several of the system's features and preferences. The last selected CONFIG screen is the screen that displays: Sound, Radio, Nav (navigation), Display , or T ime. Sound Press the CONFIG key to enter the configure menu options, then press the CONFIG key repeatedly until Sound is sel[...]

Nav (Navigation) Press the CONFIG key to enter the configure menu options, then press the CONFIG key repeatedly until Nav is selected or touch the Nav screen button. V oice Prompt V oice Prompt : T ouch the V oice Prompt screen button to change the volume of the voice prompts or to turn voice guidance on and off. V olume : T ouch the + (plus) or ?[...]

Edit Address Book — How to Add T o add an address to the address book, see “ Adding Destinations to the Address Book ” under Destination on page 5 ‑ 24 . Edit Address Book — Edit/View T o edit the name of an address book: 1. Select the CONFIG hard key . 2. Select the NA V screen button. 3. Select the Edit/View Address Book screen button. [...]

5. T ouch the Phone # screen button and use the numeric keyboard to input or change the phone number . 6. T ouch the OK screen button to save your changes, then touch the Back screen button to return to the Address Book information screen. T o change the map icon of an address book entry: 1. Select the CONFIG hard key . 2. Select the NA V screen bu[...]

Map Database Information T ouch the Map Database Information screen button to view the coverage areas of the map DVD. Off-Road Mode T o turn the Off-road mode on or off, do the following: 1. Press the CONFIG hard key . 2. Press the Nav screen button. 3. Press the Off-Road mode screen button. The button will be highlighted when the feature is on. Wh[...]

If the T raffic touch screen button is pressed or if an attempt is made to turn on the traffic display in the Navigation Setup Menu without a subscription, a Caution screen displays indicating that XM traffic is not activated. Three types of traffic information for major roadways are displayed on the navigation system: . Unscheduled traffic inciden[...]

T raffic Icon The T raffic Icon appears on the T raffic T ab, next to the word T raffic, when traffic is found in the local area. The T raffic Icon has three different condition displays. These are: Condition T raffic Status Icon . No XM NavTraff ic ™ subscription. . No Traff ic is found in the local area. . The Traffic Feature is turned off. Con[...]

if travelling on a major interstate, the system lists events immediately ahead on the interstate first. Then all other traffic events follow . Not all traffic conditions may be listed. T o view the traffic condition location and information on the map: 1. Press the NA V key , then press the NA V key repeatedly until T raffic is selected, or touch t[...]

Options Select the Options screen button. A Traffic Options menu displays. Select the desired traffic related option. T raffic : Select to enable or disable the traffic function. Show T raffic ICONS : Select to display traffic icons on the map screen. This function allows which traffic information displays. T raffic Flow Status — This touch scree[...]

T raffic flow data arrows display on the map when scaled up to eight miles. Closed Road, T raffic Delays, Incidents, and Advisories — These four touch screen buttons are used to select the traffic event ICONS that appear on the map screens. Alert for Approaching T raffic Events : When On, if an approaching traffic event is within the alert range,[...]

Scrolling to T raffic Events on the Map While scrolling the map, traffic condition icons may appear . T raffic events may appear up to 75 mi (125 km) from your current position. T o receive information about the traffic condition, place the cross hairs over the traf fic condition icon. After selecting the INFO (information) screen button, the type [...]

Category 3, Incidents: p (Alert): Object in the roadway , disabled vehicle, or dangerous road conditions. t (Accident): Roadway obstructed due to accident. s (Road Works): Delayed traffic due to construction. Category 4, Advisories: j / r (Road Condition): Delayed or stopped traffic, lane blocked or closed due to a road condition. k (Weather): Heav[...]

Back, Map, More, and A void These buttons have common functions across all three Detailed Traffic Event screens. Back : Press to return to the previous screen. Map : If available, press to display the related traffic event on the map. Map T raffic Event Icon with Back Screen More : Press to display more of the traf fic event description, if the who[...]

Display Press the CONFIG key to enter the configure menu options, then press the CONFIG key repeatedly until Display is selected or touch the Display screen button. Display Off T ouch this screen button to turn the display off. Press any hard key to view the display . Brightness/Contrast/Mode T ouch this screen button to change the brightness, cont[...]

Auto (Automatic) : T ouch this screen button for the system to automatically adjust the screen background depending on exterior lighting conditions. Night : T ouch this screen button and the system makes the map background darker . Day : T ouch this screen button and the system makes the map background brighter . Setting the Clock The navigation sy[...]

Notice: Do not apply after-market glass tinting to the vehicle's windows. Glass tinting interferes with the system's ability to receive GPS signals and causes the system to malfunction. The window might have to be replaced to correct the problem. This would not be covered by the warranty . For more information if the GPS is not functionin[...]

Problems with Route Guidance Inappropriate route guidance may occur under one or more of the following conditions: . Y ou have not turned onto the road indicated. . Route guidance may not be available when using automatic rerouting for the next right or left turn. . The route may not be changed when using automatic rerouting. . There is no route gu[...]

If you have any questions about the operation of the navigation system or the update process, contact the GM Nav Disc Center toll ‐ free phone number , 1 ‐ 877 ‐ NA V ‐ DISC (1 ‐ 877 ‐ 628 ‐ 3472) or go to the center's website, gmnavdisc.com. If you need any updates or a replacement disc, because the current disc is lost, damaged[...]

Playing the Radio O / n (Power/V olume): Press to turn the audio system on and off. T urn to increase or to decrease the volume. Press and hold for more than two seconds to turn off the navigation system, the Rear Seat Entertainment (RSE) video screen, and Rear Seat Audio (RSA). If the vehicle has not been turned off, press this knob to turn RSE an[...]

FM source shown, other sources similar If you do not want to view a split screen or you are not on a map screen, press the AUDIO hard key . AM/FM/XM : T ouch the source (AM, FM, or XM, if equipped) screen button or press the AUDIO key repeatedly until the desired source is highlighted. FM source shown, other sources similar Category : T ouch the sc[...]

XM lists also contain a category to select and the stations or channels that have broadcasts that relate to that category . For XM, touch the left and right arrow screen buttons to change categories. The station information appears on the display . See “ Radio Menu ” later in this section to add and remove XM categories from the category list. [...]

Sound Menu e (Sound): Press this key or press the CONFIG key to access the Sound menu to adjust the treble, midrange, bass, fade, balance, and Digital Signal Processing (DSP). The system automatically stores audio adjustment settings as changes are made for each audio source including AM, FM, XM (if equipped), CD, and AUX. Setting the T one TREBLE [...]

Digital Signal Processing (DSP) The system has Digital Signal Processing (DSP). DSP provides a choice of four different listening experiences. DSP can be used while listening to the audio system. Not all DSP modes are available for all source types. The type of DSP selected is displayed on the status line. Select from the following DSP settings: No[...]

Limit Features While Driving T ouch the Limit Features While Driving screen button to turn on and off the ability to limit functions while driving. When this screen button is highlighted, the following functions will be limited while driving: . Music Navigator Scrolling . Radio Category Scrolling . Navigation Menu Scrolling and some functions Numbe[...]

Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: . Receive announcements concerning local and national emergencies . Display messages from radio stations This system relies on receiving specific inf[...]

No XM signal : The vehicle is in a location that is blocking the XM ™ signal. When the vehicle is moved into an open area, the signal should return. Loading XM : The audio system is processing audio and text data received. No action is needed. Channel Off Air : This channel is not currently in service. Channel Unauth : This channel is blocked or [...]

CD Player The player can be used for CD, MP3, DVD audio, and as a DVD video player . See DVD Player on page 5 ‑ 75 for more information about DVD audio and video. Six-Disc CD Player While playing a CD, the navigation system is available. When you insert a CD, the CD tab displays. If a DSP setting is selected for the CD, it activates each time you[...]

Z (Eject): T o eject a disc, do the following: 1. Press the eject hard key . 2. The system displays “ Ejecting Disc ” . Press the DISC screen button to display the Disc Changer screen. Select the disc to eject. If a selection is not made, the system will eject the disc from the current slot. If the disc is not removed from the slot, the system [...]

r (Rewind): T ouch and hold this button to rewind quickly through a track selection. Y ou will hear sound at a reduced volume. Release this button to stop rewinding. The display will show the elapsed time of the track. [ (Forward): T ouch and hold this button to fast forward quickly through a track selection. Y ou will hear sound at a reduced volum[...]

. It is recommended that there is a maximum of 192 files on a disc. . The files can be recorded on a CD-R or CD-RW with a maximum capacity of 700MB. . DVD with MP3 are not playable on this system. Root Directory The root directory will be treated as a folder . If the root directory has compressed audio files, the directory will be displayed as No F[...]

Playing an MP3 While playing a CD, the navigation system is available. When you insert a CD, the CD tab will display . If you select a DSP setting for the CD, it will be activated each time you play a CD. If you turn off the ignition or radio with a CD in the player , it will stay in the player . When you turn on the ignition or radio, the CD will [...]

Z (Eject): T o eject a disc, do the following: 1. Press the eject hard key . 2. The system will display “ Ejecting Disc ” . Press the DISC screen button to display the Disc Changer screen. Select the disc to eject. If a selection is not made, the system will eject the disc from the current slot. If the disc is not removed from the slot, the sys[...]

[ (Forward): T ouch and hold this button to fast forward quickly through a track selection. Y ou will hear sound at a reduced volume. Release this button to stop fast forwarding. The display will show the elapsed time of the track. q r (Folder/Artist/Album): Select the left or right arrow to go to the previous or next folder, artist, or album on th[...]

DVD Player The player can be used for DVD audio and DVD video. DVD video will not display on the navigation screen unless the vehicle is in P ARK (P). It will operate on the rear seat entertainment screens while the vehicle is moving. The Rear Seat Entertainment (RSE) video screen will start play of the DVD when a DVD video has been inserted into t[...]

Z (Eject): T o eject a disc, do the following: 1. Press the eject hard key . 2. The system will display “ Ejecting Disc ” . Press the DISC screen button to display the Disc Changer screen. Select the disc to eject. If a selection is not made, the system will eject the disc from the current slot. If the disc is not removed from the slot, the sys[...]

Enter : T ouch this button to select the highlighted option. Return : T ouch this button to go back to the previous DVD menu. Back : T ouch this button to go back to the main DVD display screen. Move : T ouch this button to move the cursor buttons back and forth from the bottom-right corner to the top-left corner of the screen. j / r (Pause/Play): [...]

Menu : T ouch this button to display the DVD menu of the current area of the DVD that is playing. This button is not available for DVD audio. Audio : Press this button to display the audio options. Select the audio options that best improve sound quality . This is not available on all DVDs or when the DVD is stopped. This button is not available fo[...]

Day : T ouch this screen button and the system will make the navigation screen background darken. Monitor : From the DVD Setup screen, touch this button to adjust the viewing angle of the DVD on the navigation screen. This is not available on all DVDs. This button is not available for DVD audio T ouch the e button to close the screen in from the le[...]

Menu Language : T ouch English, Francais, Espanol, Italiano, or Deutsch to change the default language of the DVD video menus. The menu language must be available on the disc. The menu language may vary for each DVD. Parental Level : T ouch this button to change the rating level to only allow the play of DVDs with a certain rating. The rating selec[...]

DVD Messages If Disc Read Error appears on the display and/or the DVD comes out, it could be for one of the following reasons: . If a disc was inserted with an invalid or unknown format. . If the disc is not from a correct region. . If the map DVD disc was installed into the DVD audio/video slot. See “ Installing the Map DVD ” under Maps on pag[...]

USB Supported File and Folder Structure The guidelines that must be met while using USB supported files and folders are: . Up to 700 folders. . Up to 8 folders in depth. . Up to 65,535 files. . Folder and file names up to 64 bytes. . Files with an .mp3 or .wma file extension. . AAC files stored on an iPod. . F A T16 . F A T32 Using the Navigation A[...]

4. Select an Artist, Album, or Track from that list. 5. T ouch the up or down arrows located on the side of the screen to select one item at a time, or touch the top or bottom arrow to jump 10 percent up or down the list. 6. T ouch the Back button to go back to the previous screen. 7. T ouch the Exit button to go back to the main audio screen. 8. T[...]

The iPod or USB storage device should not be pulled out from the USB dock. T o safely remove it, touch Eject. A warning message will display for a few seconds. A message to safely remove the device displays. 5-84[...]

Care of Y our CDs and DVDs If playing recorded media such as a CD or DVD, the sound quality may be reduced due to CD or DVD quality , the method of recording, the quality of the music that has been recorded, recording speed, max media recording speed, and the way the CD or DVD has been handled. There may be an increase in skipping, difficulty in fi[...]

Auxiliary Devices The vehicle may have a rear entertainment system (RSE) with a second and third row screen. The RSE has audio adapters to allow you to connect auxiliary devices. The audio can be heard through the speakers or through the wireless or wired headphones. See “ Audio/Video Jacks ” under , Rear Seat Entertainment (RSE) System on page[...]

V oice Recognition The navigation system's voice recognition allows for hands-free operation of the navigation system, audio system, and OnStar ® features. The DVD map disc must be installed in the navigation system for voice recognition to work. See “ Installing the DVD Map Disc ” under Maps on page 5 ‑ 14 for more information. V oice [...]

Helpful Hints for Stating Commands . When a multiple command is available, choose the command that works best. . Words that are in brackets are optional. For example, for the command Radio [band] [select] FM, stating Radio FM or Radio select FM are both valid commands. . When the system recognizes the command the system does one of the following: ?[...]

If not currently driving on a route, the system automatically creates the voice tag destination as the final destination. If driving on a route, the system automatically creates the voice tag destination as a stopover . Up to three stopovers can be created. Storing V oice T ags From the address book entry information page, press the Add V oice tag [...]

CD Commands The following are CD, MP3, and DVD commands that can be accessed by clearly stating the commands exactly as they are written. CD, DVD, Disc : Use this command to select a CD, DVD, or disc that is currently loaded. CD, DVD, Disc, [select] track (one, two, three, etc.) : Instructs the system to select a specific track number . CD, DVD, Di[...]

Section 6 Driving Y our V ehicle Y our Driving, the Road, and the Vehicle . . . . . . . . . . 6-2 Defensive Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 D r u n k D r i v i n g ... ................................ 6 - 2 Control of a V ehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 B r a k i n g ...[...]

Y our Driving, the Road, and the V ehicle Defensive Driving Defensive driving means “ always expect the unexpected. ” The first step in driving defensively is to wear your safety belt — See Safety Belts: They Are for Everyone on page 2 ‑ 10 . { W ARNING: Assume that other road users (pedestrians, bicyclists, and other drivers) are going to [...]

For persons under 21, it is against the law in every U.S. state to drink alcohol. There are good medical, psychological, and developmental reasons for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive. Medical research shows that alcohol in a person's system can make[...]

Braking See Brake System Warning Light on page 4 ‑ 31 . Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average reaction time is about three ‐ fourths of a second. But that is only an average. It might be less with one driver and as long as two o[...]

Antilock Brake System (ABS) This vehicle has the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. When the engine is started and the vehicle begins to drive away , ABS checks itself. A momentary motor or clicking noise might be heard while this test is going on. This is normal. If there is a prob[...]

Using ABS Do not pump the brakes. Just hold the brake pedal down firmly and let antilock work. The brakes might vibrate or some noise might be heard, but this is normal. Braking in Emergencies ABS allows the driver to steer and brake at the same time. In many emergencies, steering can help more than even the very best braking. Brake Assist This veh[...]

If the system fails to turn on or activate, the StabiliTrak light along with one of the following messages will be displayed on the Driver Information Center (DIC): TRACTION CONTROL OFF , SERVICE TRACTION CONTROL, ST ABILITRAK OFF , SERVICE ST ABILITRAK. If these DIC messages appear, make sure the StabiliT rak system has not been turned off using t[...]

It is recommended to leave the system on for normal driving conditions, but it may be necessary to turn the system off if the vehicle is stuck in sand, mud, ice or snow , and you want to “ rock ” the vehicle to attempt to free it. It may also be necessary to turn off the system when driving in extreme off-road conditions where high wheel spin i[...]

Magnetic Ride Control ™ The vehicle may have the MagneRide control system. MagneRide constantly checks speed, wheel position, lift/dive and steering of the vehicle. The damping force for each shock absorber and adjustment level is chosen for the best ride and handling. MagneRide also works with the tow/haul switch that, when engaged, will provide[...]

Steering Power Steering If power steering assist is lost because the engine stops or the system is not functioning, the vehicle can be steered but it will take more effort. Steering Tips It is important to take curves at a reasonable speed. T raction in a curve depends on the condition of the tires and the road surface, the angle at which the curve[...]

An emergency like this requires close attention and a quick decision. If holding the steering wheel at the recommended 9 and 3 o'clock positions, it can be turned a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly , and just as quickly straighten the wheel once you have avoided the object. The[...]

Passing Passing another vehicle on a two-lane road can be dangerous. T o reduce the risk of danger while passing: . Look down the road, to the sides, and to crossroads for situations that might affect a successful pass. If in doubt, wait. . W atch for traffic signs, pavement markings, and lines that could indicate a turn or an intersection. Never c[...]

While driving on a surface with reduced traction, try your best to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear . Any sudden changes could cause the tires to slide. Y ou may not realize the surface is slippery until the vehicle is skidding. Learn to recognize warning clues — such as[...]

Before Y ou Go Off-Roading . Have all necessary maintenance and service work done. . Make sure there is enough fuel, that fluid levels are where they should be, and that the spare tire is fully inflated. . Be sure to read all the information about all-wheel-drive vehicles in this manual. . Make sure all underbody shields, if the vehicle has them, a[...]

Loading Y our V ehicle for Off-Road Driving { W ARNING: . Cargo on the load floor piled higher than the seatbacks can be thrown forward during a sudden stop. Y ou or your passengers could be injured. Keep cargo below the top of the seatbacks. . Unsecured cargo on the load floor can be tossed about when driving over rough terrain. Y ou or your passe[...]

. Always carry a litter bag and make sure all refuse is removed from any campsite before leaving. . T ake extreme care with open fires (where permitted), camp stoves, and lanterns. . Never park your vehicle over dry grass or other combustible materials that could catch fire from the heat of the vehicle's exhaust system. T raveling to Remote Ar[...]

Scanning the T errain Off-road driving can take you over many differ ent kinds of terrain. Be familiar with the terrain and its many different features. Surface Conditions : Off-roading surfaces can be hard-packed dirt, gravel, rocks, grass, sand, mud, snow , or ice. Each of these surfaces affects the vehicle's steering, acceleration, and brak[...]

Driving on Hills Off-road driving often takes you up, down, or across a hill. Driving safely on hills requires good judgment and an understanding of what the vehicle can and cannot do. There are some hills that simply cannot be driven, no matter how well built the vehicle. { W ARNING: Many hills are simply too steep for any vehicle. If you drive up[...]

Driving Uphill Once you decide it is safe to drive up the hill: . Use a low gear and get a firm grip on the steering wheel. . Get a smooth start up the hill and try to maintain speed. Not using more power than needed can avoid spinning the wheels or sliding. { W ARNING: T urning or driving across steep hills can be dangerous. Y ou could lose tracti[...]

. If the engine has stopped running, you need to restart it. With the brake pedal pressed and the parking brake still applied, shift the transmission to P (Park) and restart the engine. Then, shift to R (Reverse), release the parking brake, and slowly back down the hill as straight as possible in R (Reverse). . While backing down the hill, put your[...]

{ W ARNING: Heavy braking when going down a hill can cause your brakes to overheat and fade. This could cause loss of control and a serious accident. Apply the brakes lightly when descending a hill and use a low gear to keep vehicle speed under control. Things not to do when driving down a hill: . When driving downhill, avoid turns that take you ac[...]

Driving Across an Incline An off-road trail will probably go across the incline of a hill. T o decide whether to try to drive across the incline, consider the following: { W ARNING: Driving across an incline that is too steep will make your vehicle roll over . Y ou could be seriously injured or killed. If you have any doubt about the steepness of t[...]

Stalling on an Incline { W ARNING: Getting out on the downhill (low) side of a vehicle stopped across an incline is dangerous. If the vehicle rolls over , you could be crushed or killed. Always get out on the uphill (high) side of the vehicle and stay well clear of the rollover path. If the vehicle stalls when crossing an incline, be sure you, and [...]

Driving in W ater { W ARNING: Driving through rushing water can be dangerous. Deep water can sweep your vehicle downstream and you and your passengers could drown. If it is only shallow water , it can still wash away the ground from under your tires, and you could lose traction and roll the vehicle over . Do not drive through rushing water . Heavy [...]

. Slow down and keep more space between you and other vehicles because headlamps can only light up so much road ahead. . W atch for animals. . When tired, pull off the road. . Do not wear sunglasses. . Avoid staring directly into approaching headlamps. . Keep the windshield and all glass on your vehicle clean — inside and out. . Keep your eyes mo[...]

Other Rainy Weather T ips Besides slowing down, other wet weather driving tips include: . Allow extra following distance. . Pass with caution. . Keep windshield wiping equipment in good shape. . Keep the windshield washer fluid reservoir filled. . Have good tires with proper tread depth. See Tires on page 7 ‑ 57 . . T urn off cruise control. Befo[...]

Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: . Keep the vehicle serviced and in good shape. . Check all fluid levels and brakes, tires, cooling system, and transmission. . Going down steep or long hills, shift to a lower gear .[...]

Winter Driving Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall, resulting in even less traction. A void driving on wet ice or in freezing rain until roads can be treated with salt or sand. Drive [...]

{ W ARNING: Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle is stuck in the snow: . Clear away snow from around the base of your vehicle, especially any that is blockin[...]

If Y our V ehicle is Stuck in Sand, Mud, Ice, or Snow Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. See Rocking Y our V ehicle to Get It Out on page 6 ‑ 30 . If the vehicle has a traction system, it can often help to free a stuck vehicle. Refer to the vehicle's traction system in the Index. [...]

Recovery Hooks { W ARNING: These hooks, when used, are under a lot of force. Always pull the vehicle straight out. Never pull on the hooks at a sideways angle. The hooks could break off and you or others could be injured from the chain or cable snapping back. Notice: Never use recovery hooks to tow the vehicle. Y our vehicle could be damaged and it[...]

Loading the V ehicle It is very important to know how much weight the vehicle can carry . This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-i nstalled options. T wo labels on the vehicle show how much weight it was designed to carry , the T ire and Loading Information label and the[...]

The T ire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 7 ‑ 57 and Inflation - Tire Pressure on page 7 ‑ 64 . There is also important loading information on the vehicle Certification/Tire l[...]

Example 1 Item Description T otal A V ehicle Capacity Weight for Example 1 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 150 lbs (68 kg) × 2 = 300 lbs (136 kg) C Available Occupant and Cargo Weight = 700 lbs (317 kg) Example 2 Item Description T otal A V ehicle Capacity Weight for Example 2 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 150[...]

Example 3 Item Description T otal A V ehicle Capacity Weight for Example 3 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 200 lbs (91 kg) × 5 = 1,000 lbs (453 kg) C Available Cargo Weight = 0 lbs (0 kg) Refer to your vehicle's tire and loading information label for specific information about your vehicle's capacity weight and seating [...]

Certification/Tire Label A vehicle specific Certification/Tire label is attached to the rear edge of the driver's door. The label shows the size of the vehicle's original tires and the inflation pressures needed to obtain the gross weight capacity of the vehicle. This is called Gross V ehicle Weight Rating (GVWR). The GVWR includes the we[...]

{ W ARNING: Do not load the vehicle any heavier than the Gross V ehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GA WR). If you do, parts on the vehicle can break, and it can change the way the vehicle handles. These could cause you to lose control and crash. Also, overloading can shorten the life of the v[...]

There is also important loading information for off-road driving in this manual. See “ Loading Y our V ehicle for Off-Road Driving ” under Off-Road Driving on page 6 ‑ 13 . Add-On Equipment When you carry removable items, you may need to put a limit on how many people you can carry inside the vehicle. Be sure to weigh the vehicle before you b[...]

If a weight-distributing hitch is being used, it is recommended to allow the shocks to inflate, thereby leveling the vehicle prior to adjusting the height. See “ Weight Distributing Hitches and Weight Carrying Hitches ” under T owing a T railer on page 6 ‑ 42 . T ruck-Camper Loading Information The vehicle was neither designed nor intended to[...]

Dinghy T owing and Dolly T owing All-Wheel Drive V ehicles Notice: T owing an all-wheel-drive vehicle with all four wheels on the ground, or even with only two of its wheels on the ground, will damage drivetrain components. Do not tow an all-wheel-drive vehicle with any of its wheels on the ground. The vehicle is not designed to be towed with any o[...]

Level Control Automatic Level Control The automatic level control rear suspension is available on light ‐ duty vehicles and comes as a part of the Autoride ® suspension, if equipped. This type of level control is fully automatic and will provide a better leveled riding position as well as better handling under a variety of passenger and loading [...]

T owing a T railer Do not tow a trailer during break ‐ in. See New Vehicle Break-In on page 3 ‑ 30 for more information. { W ARNING: The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly . For example, if the trailer is too heavy , the brakes may not work well — or even a[...]

Pulling A T railer Here are some important points: . There are many different laws, including speed limit restrictions, having to do with trailering. Make sure the rig will be legal, not only where you live but also where you will be driving. A good source for this information can be state or provincial police. . Consider using a sway control. See [...]

Weight of the T railer How heavy can a trailer safely be? It depends on how the rig is used. Speed, altitude, road grades, outside temperature and how much the vehicle is used to pull a trailer are all important. It can depend on any special equipment on the vehicle, and the amount of tongue weight the vehicle can carry . See “ Weight of the Trai[...]

Weight of the T railer T ongue The tongue load (A) of any trailer is very important because it is also part of the vehicle weight. The Gross V ehicle Weight (GVW) includes the curb weight of the vehicle, any cargo carried in it, and the people who will be riding in the vehicle as well as trailer tongue weight. V ehicle options, equipment, passenger[...]

T otal Weight on the V ehicle's Tires Be sure the vehicle's tires are inflated to the inflation pressures found on the Certification label on the driver door or see Loading the Vehicle on page 6 ‑ 32 for more information. Make sure not to exceed the GVWR limit for the vehicle, or the RGA WR, with the tow vehicle and trailer fully loaded[...]

Weight ‐ Distributing Hitch Adjustment A : Body to Ground Distance B : Front of V ehicle When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow vehicle and adjusting the hitch. Safety Chains Always attach chains between the vehicle and the trailer . Cross th[...]

T ow/Haul Mode Pressing this button at the end of the shift lever turns on and off the tow/haul mode. This indicator light on the instrument panel cluster comes on when the tow/haul mode is on. T ow/Haul is a feature that assists when pulling a heavy trailer or a large or heavy load. See T ow/Haul Mode on page 3 ‑ 39 for more information. 6-48[...]

T ow/Haul is designed to be most effective when the vehicle and trailer combined weight is at least 75 percent of the vehicle's Gross Combined Weight Rating (GCWR). See “ Weight of the T railer ” earlier in the section. T ow/Haul is most useful under the following driving conditions: . When pulling a heavy trailer or a large or heavy load [...]

Driving with a T railer { W ARNING: When towing a trailer , exhaust gases may collect at the rear of the vehicle and enter if the liftgate, trunk/hatch, or rear-most window is open. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. T o maximize safety when towing a trailer: . [...]

Backing Up Hold the bottom of the steering wheel with one hand. Then, to move the trailer to the left, move that hand to the left. T o move the trailer to the right, move your hand to the right. Always back up slowly and, if possible, have someone guide you. Making T urns Notice: Making very sharp turns while trailering could cause the trailer to c[...]

Parking on Hills { W ARNING: Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface. If parking the rig on a hill: 1. Press the brake pedal, but do [...]

Maintenance When T railer T owing The vehicle needs service more often when pulling a trailer . See this manual's Maintenance Schedule or Index for more information. Things that are especially important in trailer operation are automatic transmission fluid, engine oil, axle lubricant, belts, cooling system and brake system. It is a good idea t[...]

Electric Brake Control Wiring Provisions These wiring provisions are included with the vehicle as part of the trailer wiring package. These provisions are for an electric brake controller . The instrument panel contains blunt cut wires near the data link connector for the trailer brake controller . The harness contains the following wires: . Dark B[...]

Section 7 Service and Appearance Care Service ......... ........................... ......... 7-4 Accessories and Modifications . . . . . . . . . . . . . . . . . . 7-4 California Proposition 65 Warning . . . . . . . . . . . . . . . 7-5 California Perchlorate Materials R e q u i r e m e n t s ................................. 7 - 5 Doing Y our Own S[...]

Section 7 Service and Appearance Care Windshield Wiper Blade Replacement ........... 7-56 Tires ............................ ................... 7-57 T ire Sidewall Labeling . . . . . . . . . . . . . . . . . . . . . . . . . 7-58 T ire T erminology and Definitions . . . . . . . . . . . . . . . 7-61 Inflation - T ire Pressure . . . . . . . . . . . . [...]

Section 7 Service and Appearance Care Electrical System ................................ 7-104 Add-On Electrical Equipment . . . . . . . . . . . . . . . . . 7-104 Windshield Wiper Fuses . . . . . . . . . . . . . . . . . . . . . . 7-105 Power Windows and Other Power Options . . . 7-105 Fuses and Circuit Breakers . . . . . . . . . . . . . . . . . . .[...]

Service For service and parts needs, visit your dealer/retailer . Y ou will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: Accessories and Modifications When non ‐ dealer/non ‐ retailer accessories are added to the vehicle, they can affect vehicle performance and safety , includin[...]

California Proposition 65 W arning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals. California Perchlorate [...]

This vehicle has an airbag system. Before attempting to do your own service work, see Servicing Y our Airbag-Equipped V ehicle on page 2 ‑ 64 . Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Record on page 8 ‑ 14 . Adding Equipment to the Outside of the V ehicle Things adde[...]

Gasoline Octane Use premium unleaded gasoline with a posted octane rating of 91 or higher . Y ou can also use regular unleaded gasoline rated at 87 octane or higher , but the vehicle's acceleration could be slightly reduced, and a slight audible knocking noise, commonly referred to as spark knock, might be heard. If the octane is less than 87,[...]

experiences problems due to dirty injectors or valves, look for gasoline that is advertised as TOP TIER Detergent Gasoline. For customers who do not use TOP TIER Detergent Gasoline regularly , one bottle of GM Fuel System T reatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valve[...]

At a minimum, E85 should meet ASTM Specification D 5798. By definition, this means that fuel labeled E85 will have an ethanol content between 70% and 85%. Filling the fuel tank with fuel mixtures that do not meet ASTM specifications can affect driveability and could cause the malfunction indicator lamp to come on. T o ensure quick starts in the win[...]

Filling the T ank { W ARNING: Fuel vapor burns violently and a fuel fire can cause bad injuries. T o help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when refueling. Do not smoke near fuel or when refueling the vehicle. Do not use cellular phones. Keep sparks, flames, and smoki[...]

{ W ARNING: Fuel can spray out on you if you open the fuel cap too quickly . If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if the tank is nearly full, and is more likely in hot weather . Open the fuel cap slowly and wait for any hiss noise to stop. Then unscrew the cap all the way . Be careful not[...]

Filling a Portable Fuel Container { W ARNING: Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor . Y ou can be badly burned and the vehicle damaged if this occurs. T o help avoid injury to you and others: . Dispense fuel only into approved containers. . Do not f[...]

Hood Release T o open the hood: 1. Pull the handle with this symbol on it. It is located inside the vehicle to the lower left of the steering wheel. 2. Then go to the front of the vehicle and locate the secondary hood release, near the center of the grille. 3. Push the secondary hood release to the right. 4. Lift the hood. Before closing the hood, [...]

Engine Compartment Overview When you open the hood on the 6.2L engine this is what you will see: 7-14[...]

A. Engine Air Cleaner/Filter on page 7 ‑ 20 . B. Coolant Surge T ank and Pressure Cap. See Cooling System on page 7 ‑ 26 . C. Remote Positive (+) T erminal. See Jump Starting on page 7 ‑ 42 . D. Battery on page 7 ‑ 41 . E. Engine Oil Fill Cap. See “ When to Add Engine Oil ” under Engine Oil on page 7 ‑ 15 . F . Automatic T ransmission[...]

When to Add Engine Oil If the oil is below the cross-hatched area at the tip of the dipstick, add at least one quart/liter of the recommended oil. This section explains what kind of oil to use. For engine oil crankcase capacity , see Capacities and Specifications on page 7 ‑ 1 12 . Notice: Do not add too much oil. If the engine has so much oil th[...]

What Kind of Engine Oil to Use Look for three things: . GM4718M This vehicle's engine requires a special oil meeting GM Standard GM4718M. Oils meeting this standard may be identified as synthetic. However , not all synthetic oils will meet this GM standard. Use only an oil that meets GM Standard GM4718M. Notice: Using oils that do not have the[...]

Engine Oil Additives / Engine Oil Flushes Do not add anything to the oil. The recommended oils with the starburst symbol that meet GM standards are all that is needed for good performance and engine protection. Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty . Engine Oil Life System Wh[...]

How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a CHANGE ENGINE OIL SOON message being turned on,[...]

Engine Air Cleaner/Filter See Engine Compartment Overview on page 7 ‑ 14 for the location of the engine air cleaner/filter . Inspect the air cleaner/filter every other oil change and replace it at the first oil change after each 50,000 mile (80 000 km) interval. See Scheduled Maintenance on page 8 ‑ 3 for more information. If driving on dusty/d[...]

3. Remove the engine air cleaner/filter from the housing. Care should be taken to dislodge as little dirt as possible. 4. Clean the engine air cleaner/filter sealing surfaces and the housing. 5. Inspect or replace the engine air cleaner/filter . 6. Reinstall the cover and tighten the screws. { W ARNING: Operating the engine with the air cleaner/fil[...]

Automatic T ransmission Fluid When to Check and Change Automatic T ransmission Fluid It is usually not necessary to check the transmission fluid level. The only reason for fluid loss is a transmission leak or overheating the transmission. If you suspect a small leak, then use the following checking procedures to check the fluid level. However , if [...]

4. Allow the engine to idle (500 – 800 rpm) for at least one minute. Slowly release the brake pedal. 5. Keep the engine running and press the T rip/Fuel button or trip odometer reset stem until TRANS TEMP (T ransmission T emperature) displays on the Driver Information Center (DIC). 6. Using the TRANS TEMP reading, determine and perform the approp[...]

4. Check both sides of the dipstick and read the lower level. Repeat the check procedure to verify the reading. 5. If the fluid level is below the COLD check band, add only enough fluid as necessary to bring the level into the COLD band. It does not take much fluid, generally less than one pint (0.5L). Do not overfill. 6. Perform a hot check at the[...]

5. Safe operating level is within the HOT cross hatch band on the dipstick. If the fluid level is not within the HOT band, and the transmission temperature is between 160°F and 200°F (71°C and 93°C), add or drain fluid as necessary to bring the level into the HOT band. If the fluid level is low , add only enough fluid to bring the level into th[...]

Cooling System The cooling system allows the engine to maintain the correct working temperature. A. Coolant Surge T ank B. Coolant Surge T ank Pressure Cap C. Engine Cooling Fan(s) { W ARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury . Keep hands, clothing, and tools away fr[...]

W ARNING: (Continued) Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned. Get any leak fixed before you drive the vehicle. Notice: Using coolant other than DEX-COOL ® can cause premature engine, heater core, or radiator corrosion. In addition, the eng[...]

What to Use { W ARNING: Adding only plain water to the cooling system can be dangerous. Plain water , or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle's coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you woul[...]

Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at or above the FULL COLD mark, add a 50/50 mi[...]

How to Add Coolant to the Surge T ank { W ARNING: Y ou can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine[...]

If no coolant is visible in the surge tank, add coolant as follows: 1. Y ou can remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. T urn the pressure cap slowly counterclockwise about one full turn. If you hear a hiss, wait for that to stop. A [...]

4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. W atch out for the engine cooling fan. By this time, the coolant level inside the coolant surge tank may be lower . If the level is lower , add more of the proper mixture to the coolant surge tank until the level [...]

Engine Overheating The vehicle has several indicators to warn of engine overheating. There is a coolant temperature gage on your vehicle's instrument panel. See Engine Coolant T emperature Gage on page 4 ‑ 33 . In addition, ENGINE OVERHEA TED STOP ENGINE, ENGINE OVERHEA TED IDLE ENGINE, and a ENGINE POWER IS REDUCED message comes on in the D[...]

If Steam Is Coming From The Engine Compartment { W ARNING: Steam from an overheated engine can burn you badly , even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. T urn it off and get everyone away from the vehicle until it cools down. W ait until there is no sign of steam or coolant before you open t[...]

If you get the ENGINE OVERHEA TED STOP ENGINE or the ENGINE OVERHEA TED IDLE ENGINE message with no sign of steam, try this for a minute or so: If the overheat warning is displayed with no sign of steam: 1. T urn the air conditioning off. 2. T urn the heater on to the highest temperature and to the highest fan speed. Open the windows as necessary .[...]

This is normal and indicates that the cooling system is functioning properly . The fans change to low speed when additional cooling is no longer required. Power Steering Fluid See Engine Compartment Overview on page 7 ‑ 14 for reservoir location. When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless[...]

Windshield W asher Fluid What to Use When windshield washer fluid needs to be added, be sure to read the manufacturer's instructions before use. Use a fluid that has sufficient protection against freezing in an area where the temperature may fall below freezing. Adding W asher Fluid The vehicle has a low washer fluid message in the DIC that co[...]

Brakes Brake Fluid The brake master cylinder reservoir is filled with DOT 3 brake fluid. See Engine Compartment Overview on page 7 ‑ 14 for the location of the reservoir . There are only two reasons why the brake fluid level in the reservoir might go down: . The brake fluid level goes down because of normal brake lining wear . When new linings ar[...]

Checking Brake Fluid Check brake fluid by looking at the brake fluid reservoir . See Engine Compartment Overview on page 7 ‑ 14 . The fluid level should be above MIN. If it is not, have the brake hydraulic system checked to see if there is a leak. After work is done on the brake hydraulic system, make sure the level is above the MIN but not over [...]

Brake Wear This vehicle has disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go or be heard all the time the vehicle is moving, except when applying the brake pedal firmly . { W ARNING: The brake wear warning sound means tha[...]

Battery Refer to the replacement number on the original battery label when a new battery is needed. See Engine Compartment Overview on page 7 ‑ 14 for battery location. { DANGER: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. W as[...]

Jump Starting If the vehicle's battery (or batteries) has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely . { W ARNING: Batteries can hurt you. They can be dangerous because: . They contain acid that can burn you. . They contain gas that can explode [...]

Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty . Always turn off the radio and other accessories when jump starting the vehicle. 3. T urn off the ignition on both vehicles. Unplug unnecessary accessories plugged into the cigarette lig[...]

{ W ARNING: An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan. { W ARNING: Using an open flame near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. [...]

6. Connect the red positive (+) cable to the positive (+) terminal of the vehicle with the dead battery . Use a remote positive (+) terminal if the vehicle has one. 7. Do not let the other end touch metal. Connect it to the positive (+) terminal of the good battery . Use a remote positive (+) terminal if the vehicle has one. 8. Now connect the blac[...]

Notice: If the jumper cables are connected or removed in the wrong order , electrical shorting may occur and damage the vehicle. The repairs would not be covered by the vehicle warranty . Always connect and remove the jumper cables in the correct order , making sure that the cables do not touch each other or other metal. Jumper Cable Removal A. Hea[...]

All-Wheel Drive T ransfer Case If your vehicle is equipped with All-Wheel Drive, be sure to perform the lubricant checks described in this section. There are two additional systems that need lubrication. When to Check Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant. See Scheduled Maintenance on page 8 ‑ 3[...]

What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 8 ‑ 10 . Rear Axle When to Check Lubricant It is not necessary to regularly check rear axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it in[...]

Front Axle When to Check and Change Lubricant It is not necessary to regularly check front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. How to Check Lubricant T o get an accurate reading, the vehicle should be on a level surface. A : Fill Plug B : [...]

What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 8 ‑ 10 . Headlamp Aiming The vehicle has a visual optical headlamp aiming system. The aim of the headlamps have been preset at the factory and should need no further adjustment. However , if the vehicle is damage[...]

Headlamp aiming is done with the vehicle's low-beam headlamps. The high-beam headlamps will be correctly aimed if the low-beam headlamps are aimed properly . T o adjust the vertical aim: 1. Open the hood. See Hood Release on page 7 ‑ 13 for more information. 2. Locate the center of the projector lens of the low ‐ beam headlamp. 3. Record t[...]

7. Locate the vertical headlamp aiming screws, which are under the hood near each headlamp assembly . The adjustment screw can be turned with a E8 T orx ® socket. 8. T urn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line. T urn it clockwise or counterclockwise to raise or lower the angle of the beam. 9. Make s[...]

Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 7 ‑ 55 . For any bulb changing procedure not listed in this section, contact your dealer/retailer . High Intensity Discharge (HID) Lighting { W ARNING: The low beam high intensity discharge lighting system operates at a very high voltage. If you try to servic[...]

2. Remove the two screws from the taillamp assembly . 3. Pull the taillamp assembly straight back to remove. 4. T urn the bulb socket counterclockwise to remove it from the taillamp assembly . 5. Pull the bulb straight out from the socket. 6. Press a new bulb into the socket, insert it into the taillamp assembly and turn the bulb socket clockwise u[...]

License Plate Lamp T o replace one of these bulbs: 1. Reach under the rear bumper for the bulb socket. 2. T urn the bulb socket counterclockwise and pull the bulb socket out of the connector . 3. Pull the old bulb from the bulb socket, keeping the bulb straight as you pull it out. 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall t[...]

Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 8 ‑ 3 . Replacement blades come in different types and are removed in different ways. T o replace the wiper blade assembly , do the following: 1. Pull the windshield wiper arm connector away from the windshield. 2[...]

Tires Y our new vehicle comes with high-quality tires made by a leading tire manufact urer . If you ever have questions about your tire warranty and where to obtain service, see your vehicle W arranty booklet for details. For additional information refer to the tire manufacturer . { W ARNING: . Poorly maintained and improperly used tires are danger[...]

22 ‐ Inch Tires If your vehicle has the optional 22 ‐ inch P285/45R22 size tires, they are classified as touring tires and are designed for on ‐ road use. The low ‐ profile, wide tread design is not recommended for off ‐ road driving. See Off-Road Driving on page 6 ‑ 13 , for additional information. Tire Sidewall Labeling Useful informa[...]

(B) TPC Spec (Tire Performanc e Criteria Specification) : Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines. (C) DOT (Department of T ransportation) : The Department of Transportation (DOT[...]

Tire Size The following examples show the different parts of a tire size. Passenger (P ‐ Metric) Tire (A) Passenger (P ‐ Metric) Tire : The United States version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S. T ire and Rim Association. ([...]

Tire T erminology and Definitions Air Pressure : The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight : This means the combined weight of optional accessories. Some examples of optional accessories are, automatic transmissi[...]

GA WR RR : Gross Axle Weight Rating for the rear axle. See Loading the Vehicle on page 6 ‑ 32 . Intended Outboard Sidewall : The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa) : The metric unit for air pressure. Light T ruck (L T ‐ Metric) Tire : A tire used on light duty trucks and some [...]

Radial Ply Tire : A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim : A metal support for a tire and upon which the tire beads are seated. Sidewall : The portion of a tire between the tread and the bead. Speed Rating : An alphanumeric code assigned to a tire indicating the ma[...]

Inflation - Tire Pressure T ires need the correct amount of air pressure to operate effectively . Notice: Do not let anyone tell you that under ‐ inflation or over ‐ inflation is all right. It is not. If your tires do not have enough air (under ‐ inflation), you can get the following: . T oo much flexing . T oo much heat . Tire overloading . [...]

How to Check Use a good quality pocket-type gage to check tire pressure. Y ou cannot tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they are underinflated. Check the tire's inflation pressure when the tires are cold. Cold means your vehicle has been sitting for at least thr[...]

Tire Pressure Monitor System The T ire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle. Each tire, including the spare (if provided), should be checked monthly[...]

Federal Communications Commission (FCC) and Industry and Science Canada See Radio Frequency Statement on page 9 ‑ 20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/21 1 of Industry and Science Canada. Tire Pressure Monitor Operation This vehicle may have a T ire Pressure Monitor System (TPMS). T[...]

TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message is also displayed. The low tire warning l[...]

TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. The sensors are matched to the tire/wheel positions in the following order: driver side front tire,[...]

8. Proceed to the driver side rear tire, and repeat the procedure in Step 5. The horn sounds two times to indicate the sensor identification code has been matched to the driver side rear tire, and the TPMS sensor matching process is no longer active. The TIRE LEARNING ACTIVE message on the DIC display screen goes off. 9. T urn the ignition switch t[...]

Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation on page 7 ‑ 67 . Make certain that all wheel nuts are properly tightened. See “ Wheel Nut T orque ” under Capacities and Specifications on page 7 ‑ 1 12 . { W ARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose [...]

Y ou need new tires if any of the following statements are true: . Y ou can see the indicators at three or more places around the tire. . Y ou can see cord or fabric showing through the tire's rubber . . The tread or sidewall is cracked, cut, or snagged deep enough to show cord or fabric. . The tire has a bump, bulge, or split. . The tire has [...]

{ W ARNING: Mixing tires could cause you to lose control while driving. If you mix tires of different sizes, brands, or types (radial and bias-belted tires), the vehicle might not handle properly , and you could have a crash. Using tires of different sizes, brands, or types could also cause damage to your vehicle. Be sure to use the same size, bran[...]

Different Size Tires and Wheels If you add wheels or tires that are a different size than your original equipment wheels and tires, this could affect the way your vehicle performs, including its braking, ride and handling characteristics, stability , and resistance to rollover . Additionally , if your vehicle has electronic systems such as anti ‐[...]

T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1.5) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual[...]

Wheel Alignment and Tire Balance The tires and wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis. However , if you notice unusual tire wear or your vehicle pulling to one [...]

Notice: The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis. See Changing a Flat Tire on page 7 ‑ 79 for more information. Used Replacement Wheels { W ARNING: Putting a used whe[...]

If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle's tires properly . If air goes out of a tire, it is much more likely to leak out slowly . But if you should ever have a blowout, here are a few tips about what to expect and what to do: If a front tire fails, the flat tire cre[...]

Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 4 ‑ 3 . { W ARNING: Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people. Y ou and they could be badl[...]

Removing the Spare Tire and T ools The jack and the wheel blocks are located under a cover near the passenger side rear seat. Rear Seat (Passenger Side) Jack Cover 1. Remove the jack cover by turning the two wing nuts one-quarter turn counterclockwise and pulling the jack cover off. A. Wheel Blocks B. Jack Knob C. Wing Nut D. Retaining Hook E. Jack[...]

3. Remove the wheel blocks (A) attached to the jack (E) by turning the wing nut (C) counterclockwise. Place the wheel blocks where needed as indicated in previously in this section. The tools for changing a flat tire are located in the passenger's side top-box storage unit. T o remove the tools, do the following: 1. Open the top door on the pa[...]

1. Open the hoist shaft access cover on the bumper to access the spare tire lock (J). 2. T o remove the spare tire lock, insert the ignition key , turn it clockwise and pull it straight out. 3. Assemble the two jack handle extensions (I) and wheel wrench (H) as shown. 4. Insert the open end of the extension (F) through the hole in the rear bumper ([...]

6. Use the wheel wrench hook that allows you to pull the hoist cable towards you, to assist in reaching the spare tire. 7. T ilt the tire with slack in the cable to access the tire/wheel retainer (D). Separate the retainer from the guide pin by sliding the retainer up the pin while pressing down on the latch. When the retainer is separated from the[...]

Removing the Flat Tire and Installing the Spare Tire The tools that are needed include the jack (A), the wheel blocks (B), the jack handle (C), the jack handle extensions (D), and the wheel wrench (E). 1. Do a safety check before proceeding. See Changing a Flat Tire on page 7 ‑ 79 for more information. T o remove the center cap, place the chisele[...]

3. Use the wheel wrench to loosen all the wheel nuts. Turn the wheel wrench counterclockwise to loosen the wheel nuts. Do not remove the wheel nuts yet. Jacking Locations (Overall View) A. Front Position B. Rear Position { W ARNING: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly inju[...]

Front Position Front Tire Flat: If the flat tire is on a front tire of the vehicle, you will need to use the jack handle (B) and only one jack handle extension (C). Attach the wheel wrench (D) to the jack handle extension (C). Attach the jack handle (B) to the jack (A). Position the jack on the frame behind the flat tire near the front body mount ([...]

5. Remove all the wheel nuts. 6. T ake off the flat tire. { W ARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches (Continued) W ARNING: (Continued) to [...]

{ W ARNING: Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle's wheel could fall off, causing a crash. 9. Put the wheel nuts back on with the rounded end of the nuts toward the wheel after mounting the spare tire. 10. T ighten each wheel nut by hand. Then use the wheel wrench to tighten the wheel nuts unti[...]

When you reinstall the regular wheel and tire, you must also reinstall the center cap. Line the tab on the back of the tab with the slot in the wheel. Place the cap on the wheel and press until it snaps into place. Secondary Latch System Y our vehicle has an underbody-mounted tire hoist assembly equipped with a secondary latch system. It is designe[...]

5. If the spare does not lower , turn the wrench counterclockwise until approximately 6 inches (15 cm) of cable is exposed. 6. Stand the wheel blocks on their shortest ends, with the backs facing each other . 7. Place the bottom edge of the jack (A) on the wheel blocks (B), separating them so that the jack is balanced securely . 8. Attach the jack [...]

9. Position the center lift point of the jack under the center of the spare tire. 10. T urn the wrench clockwise to raise the jack until it lifts the end fitting. 1 1. Continue raising the jack until the spare tire stops moving upward and is held firmly in place. The secondary latch has released and the spare tire is balancing on the jack. 12. Lowe[...]

Storing a Flat or Spare Tire and T ools { W ARNING: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury . In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. Notice: Storing an aluminum wheel with a flat tire under your vehicle for an extende[...]

1. Put the tire (A) on the ground at the rear of the vehicle with the valve stem pointed down, and to the rear . 2. T ilt the tire. Separate the tire/wheel retainer (D) from the guide pin. Pull the pin through the center of the wheel. T ilt the retainer down through the center wheel opening. 7-93[...]

3. Assemble the two jack handle extensions (I) and wheel wrench (H) as shown. 4. Insert the open end of the extension (F) through the hole in the rear bumper (G) (hoist shaft access hole). 5. Raise the tire part way upward. Make sure the retainer is fully seated across the underside of the wheel and is centered in the wheel opening. 6. Raise the ti[...]

7. Make sure the tire is stored securely . Push, pull (A), and then try to turn (B) the tire. If the tire moves, use the wheel wrench to tighten the cable. 8. Reinstall the spare tire lock. 9. Close the hoist shaft access cover . T o store the tools, follow these steps: 1. Return the tools to the tool bag and place it back in the top ‐ box storag[...]

Spare Tire Y our vehicle, when new , had a fully-inflated spare tire. A spare tire may lose air over time, so check its inflation pressure regularly . See Inflation - Tire Pressure on page 7 ‑ 64 and Loading the Vehicle on page 6 ‑ 32 for information regarding proper tire inflation and loading your vehicle. For instruction on how to remove, ins[...]

Notice: Using abrasive cleaners when cleaning glass surfaces on the vehicle, could scratch the glass and/or cause damage to the rear window defogger . When cleaning the glass on the vehicle, use only a soft cloth and glass cleaner . Many cleaners contain solvents that may become concentrated in the vehicle's breathing space. Before using clean[...]

Fabric/Carpet Use a vacuum cleaner with a soft brush attachment frequently to remove dust and loose dirt. A canister vacuum with a beater bar in the nozzle may only be used on floor carpet and carpeted floor mats. For any soil, always try to remove it first with plain water or club soda. Before cleaning, gently remove as much of the soil as possibl[...]

Instrument Panel, Vinyl, and Other Plastic Surfaces A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is necessary , a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dirt. Never use spot lifters or removers on plastic surfaces. Many commercial cleaners and coatings th[...]

Weatherstrips Silicone grease on weatherstrips will make them last longer , seal better , and not stick or squeak. Apply silicone grease with a clean cloth. During very cold, damp weather frequent application may be required. See Recommended Fluids and Lubricants on page 8 ‑ 10 . W ashing Y our V ehicle The best way to preserve the vehicle's[...]

Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. Approved cleaning products can be obtained from your dealer/retailer . If the vehicle has a basecoat/clearcoat paint finish, the clearcoat gives more depth and gloss to the colored basecoat. Always use waxes and polishes [...]

Aluminum or Chrome-Plated Wheels and T rim The vehicle may have either aluminum or chrome-plated wheels. Keep the wheels clean using a soft clean cloth with mild soap and water . Rinse with clean water . After rinsing thoroughly , dry with a soft clean towel. A wax may then be applied. Notice: Chrome wheels and other chrome trim may be damaged if t[...]

Tires T o clean the tires, use a stiff brush with tire cleaner . Notice: Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle. Sheet Metal Damage If the vehicle is damaged and requires sheet metal re[...]

V ehicle Identification V ehicle Identification Number (VIN) This legal identifier is in the front corner of the instrument panel, on the driver side. It can be seen through the windshield from outside. The VIN also appears on the Certification/T ire and Service Parts labels and certificates of title and registration. Engine Identification The eigh[...]

The vehicle has an airbag system. Before attempting to add anything electrical to the vehicle, see Servicing Y our Airbag-Equipped V ehicle on page 2 ‑ 64 and Adding Equipment to Y our Airbag-Equipped V ehicle on page 2 ‑ 65 . Windshield Wiper Fuses The windshield wiper motor is protected by a circuit breaker and a fuse. If the motor overheats [...]

The vehicle may not use all of the fuses shown. Fuses Usage 1 Rear Seats 2 Rear Accessory Power Outlet 3 Steering Wheel Controls Backlight 4 Driver Door Module 5 Dome Lamps, Driver Side T urn Signal 6 Driver Side T urn Signal, Stoplamp 7 Instrument Panel Back Lighting 8 Passenger Side Turn Signal, Stoplamp Fuses Usage 9 Passenger Door Module, Drive[...]

Circuit Breaker Usage L T DR Driver Side Power Window Circuit Breaker Harness Connector Usage L T DR Driver Door Harness Connection BODY Harness Connector BODY Harness Connector Center Instrument Panel Fuse Block The center instrument panel fuse block is located underneath the instrument panel, to the left of the steering column. T op View Harness [...]

Harness Connector Usage HEADLINER 3 Headliner Harness Connector 3 HEADLINER 2 Headliner Harness Connector 2 HEADLINER 1 Headliner Harness Connector 1 SEO/UPFITTER Special Equipment Option Upfitter Harness Connector Circuit Breaker Usage CB1 Passenger Side Power Window Circuit Breaker CB2 Passenger Seat Circuit Breaker CB3 Driver Seat Circuit Breake[...]

Fuses Usage 1 Right T railer Stop/T urn Lamp 2 Electronic Stability Suspension Control, Automatic Level Control Exhaust 3 Left T railer Stop/Turn Lamp 4 Engine Controls Fuses Usage 5 Engine Control Module, Throttle Control 6 T railer Brake Controller 7 Front W asher 8 Oxygen Sensors 9 Antilock Brakes System 2 10 T railer Back-up Lamps 1 1 Driver Si[...]

Fuses Usage 24 Fuel Injectors, Ignition Coils (Left Side) 25 T railer Park Lamps 26 Driver Side Park Lamps 27 Passenger Side Park Lamps 28 Fog Lamps 29 Horn 30 Passenger Side High-Beam Headlamp 31 Daytime Running Lamps (DRL) 32 Driver Side High-Beam Headlamp 33 Daytime Running Lights 2 34 Sunroof 35 Key Ignition System, Theft Deterrent System 36 Wi[...]

J-Case Fuses Usage 57 Cooling Fan 1 58 Automatic Level Control Compressor 59 Heavy Duty Antilock Brake System 60 Cooling Fan 2 61 Antilock Brake System 1 62 Starter 63 Stud 2 (Trailer Brakes) 64 Left Bussed Electrical Center 1 65 Electric Running Boards 66 Heated Windshield Washer System 67 T ransfer Case 68 Stud 1 (Trailer Connector Battery Power)[...]

Capacities and Specifications The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 8 ‑ 10 for more information. Application Capacities English Metric Air Conditioning Refrigerant R134a For the Air Conditioning system refrigerant charge amount, see the refrigerant caution l[...]

Application Capacities English Metric T ransmission Fluid (Pan Removal and Filter Replacement) 6.0 qt 5.7 L T ransfer Case Fluid 1.5 qt 1.4 L Wheel Nut T orque 140 lb ft 190 Y All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid after filling. † Oil filter should be ch[...]

2 NOTES 7-1 14[...]

Section 8 Maintenance Schedule Maintenance Schedule ........................ .... 8-2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Scheduled Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Owner Checks and Services . . . . . . . . . . . . . . . . . . . . 8-8 Recommended Fluids and Lubric[...]

Maintenance Schedule Introduction Notice: Maintenance intervals, checks, inspections, recommended fluids, and lubricants are necessary to keep this vehicle in good working condition. Damage caused by failure to follow scheduled maintenance might not be covered by the vehicle warranty . Proper vehicle maintenance helps to keep the vehicle in good wo[...]

At your General Motors dealer/retailer , you can be certain that you will receive the highest level of service available. Y our dealer/retailer has specially trained service technicians, uses genuine GM replacement parts, as well as, up to date tools and equipment to ensure fast and accurate diagnostics. The proper replacement parts, fluids, and lu[...]

Every Engine Oil Change . Change engine oil and filter . See Engine Oil on page 7 ‑ 15 . An Emission Control Service. . Engine coolant level check. See Engine Coolant on page 7 ‑ 27 . . Windshield washer fluid level check. See Windshield Washer Fluid on page 7 ‑ 37 . . T ire inflation check. See Inflation - Tire Pressure on page 7 ‑ 64 . . [...]

Additional Required Services At Each Fuel Stop . Engine oil level check. See Engine Oil on page 7 ‑ 15 . . Engine coolant level check. See Engine Coolant on page 7 ‑ 27 . . Windshield washer fluid level check. See Windshield Washer Fluid on page 7 ‑ 37 . Once a Month . T ire inflation check. See Inflation - Tire Pressure on page 7 ‑ 64 . . [...]

First Engine Oil Change After Every 40 000 km/25,000 Miles . Fuel system inspection for damage or leaks. First Engine Oil Change After Every 80 000 km/50,000 Miles . Engine air cleaner filter replacement. See Engine Air Cleaner/Filter on page 7 ‑ 20 . . Automatic transmission fluid and filter change (severe service) for vehicles mainly driven in [...]

First Engine Oil Change After Every 160 000 km/100,000 Miles . Automatic transmission fluid and filter change (normal service). See Automatic T ransmission Fluid on page 7 ‑ 22 . . Four ‐ wheel drive only: Transfer case fluid change (normal service). Check vent hose at transfer case for kinks and proper installation. Check to be sure vent hose [...]

Owner Checks and Services Starter Switch Check { W ARNING: When you are doing this inspection, the vehicle could move suddenly . If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. 2. Firmly apply both the parking brake and the regular brake. See Parking Brake on page[...]

Ignition T ransmission Lock Check While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. . The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). . The ignition key should come out only in LOCK/OFF . Contact your dealer/retailer if service is required. Parking Brake a[...]

Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number , or specification can be obtained from your dealer/retailer . Usage Fluid/Lubricant Engine Oil The engine requires a special engine oil meeting GM Standard GM4718M. Oils meeting this standard can be identified as synthetic, and should also be identified w[...]

Usage Fluid/Lubricant Chassis Lubrication Chassis Lubricant (GM Part No. U.S. 12377985, in Canada 88901242) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. Front and Rear Axle SAE 75W-90 Synthetic Axle Lubricant (GM Part No. U.S. 89021677, in Canada 89021678) meeting GM Specification 99861 15. T ransfer Case DEXRON ® -VI Automa[...]

Maintenance Replacement Parts Replacement parts identified below by name, part number , or specification can be obtained from your dealer/retailer . Maintenance Replacement Parts Part GM Part Number ACDelco Part Number Engine Air Cleaner/Filter 15908916 A3086C Oil Filter 89017524 PF48 Spark Plugs 12621258 41-1 10 Wiper Blades Front – 21.6 in (55.[...]

Engine Drive Belt Routing 8-13[...]

Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts. Maintenance Record Date Odometer Reading Serviced By Maintenance Stamp Services Performed 8-14[...]

Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed 8-15[...]

Maintenance Record (cont'd) Date Odometer Reading Serviced By Maintenance Stamp Services Performed 8-16[...]

Section 9 Customer Assistance Information Customer Assistance and Information . . . . . . . . . . . 9-2 Customer Satisfaction Procedure . . . . . . . . . . . . . . . 9-2 Online Owner Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5 Customer Assistance for T ext T elephone (TTY) Users . . . . . . . . . . . . . . . . . . 9-6 Custome[...]

Customer Assistance and Information Customer Satisfaction Procedure Y our satisfaction and goodwill are important to your dealer and to Cadillac. Normally , any concerns with the sales transaction or the operation of the vehicle will be resolved by the dealer's sales or service departments. Sometimes, however , despite the best intentions of a[...]

STEP THREE (U.S. Owners) : Both General Motors and your dealer are committed to making sure you are completely satisfied with your new vehicle. However , if you continue to remain unsatisfied after following the procedure outlined in Steps One and T wo, you can file with the Better Business Bureau (BBB) Auto Line Program to enforce your rights. The[...]

STEP THREE (Canadian Owners): General Motors Participation in the Mediation/Arbitration Program In the event that you do not feel your concerns have been addressed after the following the procedure outlined in Steps One and T wo. General Motors of Canada Limited wants you to be aware of its participation in a no-charge mediation/Arbitration program[...]

Online Owner Center Online Owner Center (U.S.) — www .gmownercenter .com/cadillac Information and services customized for your specific vehicle — all in one convenient place. . Digital owner manual, warranty information, and more . Online service and maintenance records . Find Cadillac dealers for service nationwide . Exclusive privileges and o[...]

Customer Assistance for T ext T elephone (TTY) Users T o assist customers who are deaf, hard of hearing, or speech-impaired and who use T ext T elephones (TTYs), Cadillac has TTY equipment available at its Customer Assistance Center . Any TTY user can communicate with Cadillac by dialing: 1-800-833-CMCC (2622). (TTY users in Canada can dial 1-800-2[...]

Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V . Customer Assistance Center Paseo de la Reforma # 2740 Col. Lomas de Bezares C.P . 1 1910, Mexico, D.F . 01-800-508-0000 Long Distance: 01 1-52-53 29 0 800 GM Mobility Reimbursemen[...]

Roadside Service In the United States or Canada, call 1-800-882-1 1 12 . T ext T elephone (TTY), U.S. only , call 1-888-889-2438 . Service is available 24 hours a day , 365 days a year . Calling for Assistance When calling Roadside Assistance, have the following information ready: . Y our name, home address, and home telephone number . T elephone n[...]

Cadillac Owner Privileges ™ . Emergency Fuel Delivery: Delivery of enough fuel for the vehicle to get to the nearest service station. . Lock ‐ Out Service: Service is provided to unlock the vehicle if you are locked out. A remote unlock may be available if you have OnStar ® . For security reasons, the driver must present identification before [...]

Cadillac T echnician Roadside Service (U.S. only) Cadillac's exceptional Roadside Service is more than an auto club or towing service. It provides every Cadillac owner in the United States with the advantage of contacting a Cadillac advisor and, where available, a Cadillac trained dealer technician who can provide on-site service. A dealer tec[...]

Scheduling Service Appointments When your vehicle requires warranty service, contact your dealer/retailer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer/retailer can help minimize your inconvenience. If your vehicle cannot be scheduled into the service d[...]

T ransportation Options W arranty service can generally be completed while you wait. However , if you are unable to wait, GM helps to minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: Shuttle Service Participating dealers can provide shuttle servi[...]

General Motors reserves the right to unilaterally modify , change, or discontinue Courtesy T ransportation at any time and to resolve all questions of claim eligibility pursuant to the terms and conditions described herein at its sole discretion. Collision Damage Repair If your vehicle is involved in a collision and it is damaged, have the damage r[...]

Repair Facility GM also recommends that you choose a collision repair facility that meets your needs before you ever need collision repairs. Y our GM dealer/retailer may have a collision repair center with GM-trained technicians and state of the art equipment, or be able to recommend a collision repair center that has GM-trained technicians and com[...]

Gather the following information: . Driver's name, address, phone number . Driver's license number . Owner's name, address, phone number . V ehicle license plate . V ehicle make, model and model year . V ehicle Identification Number (VIN) . Insurance company and policy number . General description of the damage to the other vehicle C[...]

Reporting Safety Defects Reporting Safety Defects to the United States Government If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying General Motors. If NHTSA receives similar complai[...]

Reporting Safety Defects to General Motors In addition to notifying NHTSA (or T ransport Canada) in a situation like this, please notify General Motors. Call 1-800-458-8006, or write: Cadillac Customer Assistance Center Cadillac Motor Car Division P .O. Box 33169 Detroit, MI 48232-5169 In Canada, call 1 ‐ 888 ‐ 446 ‐ 2000, or write: Canadian [...]

Current and Past Model Order Forms T echnical Service Bulletins and Manuals are available for current and past model GM vehicles. T o request an order form, specify year and model name of the vehicle. ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc.[...]

Event Data Recorders This vehicle has an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dyn[...]

OnStar ® If the vehicle has OnStar and you subscribe to the OnStar services, please refer to the OnStar T erms and Conditions for information on data collection and use. Navigation System If your vehicle has a navigation system, use of the system may result in the storage of destinations, addresses, telephone numbers, and other trip information. R[...]

A Accessories and Modifications . . . . . . . . . . . . . . . . . . . . . . . 7-4 Accessory Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32 Accessory Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Active Fuel Management ™ . . . . . . . . . . . . . . . . . . . . . . . . 3-35 Add-On Electrical [...]

Appearance Care (cont.) W ashing Y our V ehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-100 Weatherstrips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-100 Windshield and Wiper Blades . . . . . . . . . . . . . . . . . . . . 7-101 Wood Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Camera, Rear Vision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-50 Canadian Owners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Capacities and Specifications . . . . . . . . . . . . . . . . . . . . . 7-1 12 Carbon Monoxide Engine Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Climate Control Systems Dual Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 Collision Damage Repair . . . . . . . . .[...]

Driving At Night . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24 Before a Long Trip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26 Defensive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Drunk . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Engine (cont.) O i l ........ ............ ............ ............. ...7 - 1 5 Overheated Protection Operating Mode . . . . . . . . . . 7-35 Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-33 Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32 Engine Oil Lif[...]

G Gages Engine Coolant T emperature . . . . . . . . . . . . . . . . . . . . . 4-33 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39 Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 T achometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Instrument Panel Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Storage Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-60 Instrument Panel Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 Integrated Trailer Brake Control System (ITBC) . . . . . . . . [...]

Lights (cont.) On Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Passenger Airbag Status Indicator . . . . . . . . . . . . . . . . 4-29 Safety Belt Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

N Navigation Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Using the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 Navigation System, Privacy . . . . . . . . . . . . . . . . . . . . . [...]

P ASS-Key ® III+ Electronic Immobilizer . . . . . . . . . . . . . 3-28 P ASS-Key ® III+ Electronic Immobilizer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Passenger Airbag Status Indicator . . . . . . . . . . . . . . . . . 4-29 Passenger Sensing System . . . . . . . . . . . . . . . . . . . . . . [...]

Reclining Seatbacks, Power . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Recommended Fluids and Lubricants . . . . . . . . . . . . . 8-10 Recovery Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-31 Recreational V ehicle T owing . . . . . . . . . . . . . . . . . . . . . . . 6-39 Reimbursement Program, GM Mobilit[...]

Seats Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Heated and Cooled Seats . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Power Lumbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Power Reclining Seatbacks . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Power S[...]

Stuck in Sand, Mud, Ice, or Snow . . . . . . . . . . . . . . . . . 6-30 Sun Visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25 Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-77 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

T ires (cont.) Wheel Alignment and T ire Balance . . . . . . . . . . . . . . . 7-76 Wheel Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-76 When It Is T ime for New Tires . . . . . . . . . . . . . . . . . . . . 7-71 T op-Box Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-76 T ow/Haul Mode [...]

W W arning Lights, Gages, and Indicators . . . . . . . . . . . . 4-25 W arnings DIC Warnings and Messages . . . . . . . . . . . . . . . . . . . . . 4-48 Hazard Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Safety and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Wheels Alignment an[...]