Canon LV-7585 manual

E User ’ s Manual MUL TIMEDIA PROJECT OR[...]

2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durabilit y , and ease of use. This projector utilizes built-in multimedia feat ures, a palette of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Multi-use Remote Contr ol Unit Use the remote control uni[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ur es and Design . . . . . . . . . . . . . . . . 2 T able of Cont ents . . . . . . . . . . . . . . . . . . 3 T o T h e O w n e r ..................... 4 Saf ety Instr uctions . . .[...]

4 C A U T I O N : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L T AG E C O N ST I TUT I N G A R I S K O F E L E C T R IC SHOCK IS PRESENT WITHIN THIS UNIT . THIS S YMBO[...]

5 All the saf et y and operating instr uctions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollow all warnings and instr uctions marked on the [...]

6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the following precautions should be taken. – Do not put any flam[...]

7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, do wnward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downw ardly inclined position, inst[...]

8 Moving the Projector Use the handle grip when moving the projector . Retract the adjustable f eet to prev ent damage to the lens and cabinet when carr ying. When this projector is not in use for an e xtended period, put it into a suitable case to protect the projector . CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump [...]

9 Compliance The A C P ower Cord supplied with this projector meets the requirement f or use in the countr y you purc hased it. AC P ow er Cord f or the United States and Canada: A C P ower Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) and certified by the Canadian Standard A ssociation (CSA). A C P ower[...]

1 0 i e t y Front !1 !0 q w u o Bottom Back q Indicat ors w T op Cov er e T op Cover Release But ton r Lens Cap !7 !8 !6 !3 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !3 T erminals and Connect ors !4 Infrar ed Remote Receiv er (Back) !5 P ower Cor d Connector !6 Optional P arts [...]

1 1 Rear T erminal t R/C JA CK When using the wired remote control unit, connect the wired remote control unit to this jac k with a remote control cable (not supplied). ✔ Note: • Use a DVI-Digital cable whic h fits the width of the rear terminal. i S-VIDEO INPUT JA CK Connect the S-VIDEO output signal from video equipment to this jac k (p[...]

12 w INPUT but ton Select an input source (pp.31–33). q PO WER button T urn the projector on or of f (pp.23–24). e LENS but ton Enter the focus, z oom, and lens shif t adjustment mode (p.27). r P oint ed7 8 butt ons – Select an item or adjust the v alue in the On- Screen Menu (p.25). – P an the image in Digit al z oom + mode (p.[...]

13 q ST AND-B Y butt on T urn the projector of f (p.24). r ON butt on T urn the projector on (p.23). t INPUT 1 – 3 but tons Select an input source (INPU T 1 – INPU T 3) (pp.31–33). y  A UT O PC button A utomatically adjust the computer image to its optimum set ting (pp.28, 35). i POINT ed 7 8 buttons – Select an item or adjust the v a[...]

14 Remote Control Unit !6 !4 !5 !9 !7 !8 !3 MENU butt on Open or close the On-Screen Menu (p.25). !6 ZOOM ed buttons Zoom in and out the images (p.28). !5 D-ZOOM button Select the Digital zoom +/- mode and resize the image (p.40). @0 FOCUS but tons Adjust the f ocus (p.28). !8 FIL TER butt on Scroll the filter (p.29). !4 P -TIMER but[...]

15 Remote Control Battery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. Press the lid do wnward and slide it. T wo AAA size bat teries F or correct polarit y (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o insure saf e operat[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote control units when several projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first before c han[...]

1 7 AD JUST ABLE FEET Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rot ate the both f eet cloc kwise. T o low er the projector or to retract the adjust able f eet, rotate the both f eet countercloc kwise. T o correct k ey[...]

1 8 When replacing the lens or using an optional lens, install the lens by follo wing the instructions belo w . Ask the sales dealer for detailed information of the optional lens specifications. Lens Installation While pressing the top cov er release but ton on the top cov er , slide the top cov er toward front to remov e it Shif t the lens to the [...]

1 9 NO TES ON LENS INST ALLA TION ● Do not touc h or remov e any parts ex cept the lens and related parts. It may result in malfunctions, electrical shoc k, fire hazard or other accidents. ● Bef ore inst alling or replacing the lens, c hec k that the Model No. of the Projection L ens matc hes to the projector . ● F or det ails of the lens and[...]

20 Monitor Output BNC cable Connecting to a Computer (Digital and Analog RGB) Monitor Output G B R H/V V D VI-Digit al cable V GA cable V GA cable USB cable USB port Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. Cables used for connection ( ] = Cables not supplied with this projec[...]

21 RGB Scart 21 -pin Output Connecting to V ideo Equipment (V ideo, S-V ideo) S-video cable S-video Output Composite Video Y - Pb/Cb - Pr/Cr BNC cable Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. Cables used for connection ( ] = Cables not supplied with this projector .) • Vide[...]

22 This projector uses nominal input v olt ages of 1 00–1 20 V or 200– 240 V A C and it automatically selects the correct input voltage. It is designed to work with single-phase po wer systems ha ving a grounded neutral conductor . T o reduce the risk of electrical shoc k, do not plug into any other type of pow er system. If you are not sure of[...]

23 T urning On the Projector Connect the projector’ s A C pow er cord into an A C outlet. The LAMP indicator lights red and the PO WER indicator lights green. Press the PO WER but ton on the side control or the ON but ton on the remote control unit. The LAMP indicator dims and the cooling fans start to operate. The preparation displa y appears on[...]

24 Press the PO WER but ton on the side control or the ST AND-B Y but ton on the remote control unit, and “P ower of f?” appears on the screen. Press the PO WER but ton on the side control or the ST AND-B Y but ton on the remote control unit again to turn of f the projector . The LAMP indicator lights bright and the PO WER indicator turns of f [...]

25 Side Contr ol OK butt on How to Operate the On-Screen Menu MENU butt on OK butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, ref er to the respective sections in this manual. Use the P oint 7 8 but tons to select a Menu icon. Use the P oint ed but ton[...]

26 Menu Bar For Computer Source For Video Source Same function as menu for Computer Source. Same function as menu for Computer Source. Guide Window Show the selected Menu of the On- Screen Menu. PC Syst em Menu Used to select computer system (p. 34). Image Select Menu Used to select an image lev el among Standard, High contrast, and Custom 1–1 0 [...]

27 Operating with Projector Control The f ollowing lens operation can be made with the L ens but ton on the side control. Press the LENS but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired poin[...]

28 Operating with Remote Control Unit Using the remote control unit for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control unit to freeze the pict ure on the screen. T o cancel the F[...]

29 Press the BLANK but ton on the remote control unit to blac k out the image. T o restore to normal, press the BLANK but ton again or press any other but ton. BLANK but ton FIL TER butt on Press and hold the FIL TER but ton for more than 5 seconds to operate electrically operated filter to replace the filter . KEY ST ONE butt on Reduce the upper w[...]

30 Pointer Function P ointer ✔ Note: • Y ou can choose the pat tern of Pointer (Ar row/Cross/Dot) in the Set ting Menu (p. 52) Y ou can mov e the P ointer of the projector with the remote control unit to emphasize a part of the projected image. Press the POINTER but ton to activate the P ointer function. 1 2 3 MOUSE POINTER butt on POINTER butt[...]

31 Remote Contr ol Unit INPUT butt ons Input Press the INPU T 1, INPU T 2, or INPU T 3 but tons on the remote control unit. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation Remote Contr ol but ton operation Side Contr ol INPUT butt on Press the INPU T but ton on the side[...]

32 Computer Input Source Selection WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arrow pointer to the desired input and then press the OK but ton. The Source Selec[...]

33 When the video input signal is connected to the Y - Pb/Cb-Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When the video input signal is connected to the S- VIDEO jac k, select S-Video. When connecting to video equipment, select the type of Video source in the Source Select Menu.[...]

34 Computer System Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXG A+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 71–72). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to project a p[...]

35 Auto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ed but tons [...]

36 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan system of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It allo[...]

37 Exit the PC A djust Menu. T o store the adjusted data, select Store and then press the OK but ton. Mov e the red arrow pointer to one of the Mode 1 to 1 0 in whic h you w ant to store, and then press the OK but ton. T o reset the adjusted data, select Reset and press the OK but ton. A confirmation box appears and then select [Y es]. All adjustme[...]

38 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the OK but ton. IMAGE SELECT MENU Normal picture le vel preset on the projector . Standard Picture[...]

39 Screen Size Adjustment Select the desired screen size that conf orms to the input signal source. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the OK but to[...]

40 Select Digital zoom +. The On-Screen Menu disappears and “D- zoom +” appears. P ress the OK but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digit al z oom + mode by pressing the D-ZOOM but ton on the re[...]

41 A V S Y STEM MENU (VIDEO OR S-VIDEO) A V S Y STEM MENU (COMPONENT VIDEO) V ideo System Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V Sy stem Menu icon. Use the P oint ed but tons to mov e the red arrow pointer to the desired system and then press the OK but t[...]

42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the OK but ton. IMAGE SELECT MENU Image Level Selection Mov e the red frame pointer to the desired[...]

43 Screen Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the OK but ton. 1 2 ✔ Note: • Wide cannot be operated when “720p, ” “1035i, ”[...]

44 Ke ystone This function is used to store or reset the k eystone cor rection when the A C pow er cord is unplugged. Use the P oint 7 8 buttons to switc h between eac h option. Store . . . K eep the key stone correction ev en when the A C power cord is unplugged. Reset . . Release the k ey stone correction when the A C power cord is unplugged. T o[...]

45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the OK but ton to display the adjustment dialog box. Use the P oint 7 8 but tons to adjust the set ting v[...]

46 A uto pict ure contr ol Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c hec k mark if you do not w ant to apply the adjusted col[...]

47 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressive mode. Pres[...]

48 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, Italian, Spanish, P ortuguese, Dutc h, Sw edish, Russian, Chinese, K orean, or Japanese. Use the P oint ed but[...]

49 This function allo ws you to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Before capturing an image, select “ Standard ” in the Image Select Menu to capture a proper image (pp. 38, 42). Adjusted image on the screen cannot be captured. • A signal from a computer can be captured[...]

50 Change the Log o PIN code lock set ting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 buttons to switc h On/Off , This function pre vents an unauthorized person from c hanging the screen logo. Of f . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen logo cann[...]

51 Lamp mode Filter contr ol Choose the running speed of cooling f ans from the follo wing options. Normal ....... Operate in this mode under normal conditions. Max ........... Use this mode when you w ant to increase the cooling ef f ect when operating the projector in high ambient temperature en vironment. Fan noise is lounder than “Normal” .[...]

52 On start When this function is set to “ On, ” the projector will be automatically turned on just b y connecting the A C power cord to the wall outlet. ✔ Note: • Be sure to turn off the projector properly (see “T urning Off the Projector” on page 24). If the projector is turned of f in the incorrect sequence, the On start function doe[...]

53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y lock and this box appears. Choose one of the alternatives with the P oint ed buttons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthorized persons. . . . . . Unloc ked. . . . . . L ock the side control but tons.[...]

54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 76, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST ARTED. The PIN code can be c hanged to your desired four -digit number . Press the P oint d bu[...]

55 F actory def ault This function ret urns all set ting values ex cept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. F actory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the next box appears. T est pat ter n V ari[...]

56 Filter Instructions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef fectiv eness and may result in internal heat buildup and adversely af f ect the life of the projector . This projector has an electrically operated fi[...]

57 T urn of f the projector , and unplug the A C power cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Press s on the filter co ver to release the latc h and open the filter cov er . 3 Put the ne w one bac k into the position and close the filter cov er . Make sure that the filter cartridge is prope[...]

58 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the OK but ton. A dialog box appears sho [...]

59 T urn of f the projector and unplug the A C power cord. L et the projector cool for at least 45 minutes. Loosen the scre w and open the lamp cover . Pull out the lamp by using the built in handle. 1 3 Replace the lamp with a ne w one. Make sure that the lamp is properly and fully inserted. 4 Open the filter cov er . (p.57) 2 Connect the A C pow [...]

60 ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer . When ordering , give the f ollowing information to the dealer . ● Model No. of your pr ojector : L V -7585 ● Replacement Lamp T ype No. : L V -LP29 Resetting the Lamp Counter Be sure to reset the Lamp counter af ter the lamp is replaced. When the Lamp counter is res[...]

61 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif f er from lamp to lamp and according to the environment of use. T here is no guarantee of the same lif etime for eac h lamp. Some lamps may fail or termin[...]

62 Unplug the A C power cord bef ore cleaning . Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens. A void using an ex cessive amount of cleaner . Abrasive cleaners, solvents, or other harsh c h[...]

63 The W ARNING indicators show the state of the function whic h protects the projector . Chec k the st ate of the W ARNING indicators and the PO WER indicator to t ak e proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a certain le[...]

64 T roubleshooting Bef ore calling your dealer or ser vice center f or assist ance, c hec k the items below once again. 1 . Make sure you ha ve properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and pow er cords are properly connect[...]

65 W ARNING: High voltag es ar e used to operat e this project or . Do not at tempt t o open the cabinet. If problems still persist af ter f ollowing all operating instr uctions, contact the dealer where y ou purc hased the projector or the ser vice center . Specify the model number and explain about the problem. W e will advise you how to obt ain [...]

66 Menu T ree Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Network Video RGB Go to Syst em (2) Go to Syst em (3) Go to Syst em (1) Go to Syst em (2) Video Y , Pb/Cb,Pr/Cr S-video Go to Syst em (3) Go to Syst em (2) Input 2 Input 3 Go to Syst em (1) Input H-sy[...]

67 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard High contrast Custom 1 Custom 1 0 Scr een Normal T rue Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 [...]

68 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto mode/Normal mode /Eco 1 mode/Eco 2 mode Y es/No 1 2 languages provided. Menu Logo Lamp mode Filter control Both/F ront/Bac k Normal/Max P ower management Bac kground On/Of f Logo PIN code c hange [...]

69 Indicators and Projector Condition Chec k the indicators for the projector condition. Indicat ors Pr ojector Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector is of f . (The A C pow er cord is unplugged.) The projector is in stand-by mode. P ress the PO WER but ton to turn on the pro[...]

70 Indicat ors Pr ojector Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector has been cooled do wn enough and the temperat ure returns to normal. When turning on the projector , the W ARNING TEMP . indicator stops blinking . Chec k and replace the filter . The lamp cannot light up. (T he[...]

71 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) V GA 1 640x480 31 .470 59.880 V GA 2 720x400 31 .470 70.090 V GA 3 640x400 31 .470 70.090 V GA 4 640x480 37 .860 7 4.380 V GA 5 640x480 37 .860 72.81 0 V GA 6 640x480 37 .50 0 75.0 00 V GA 7 640x480 43.269 85.00 0 MA C LC1 3 640x480 34.970 66.60 0 MA C 1 3 640x480 35.000 66.670 480p 640x[...]

72 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) D-V GA 640x480 31 .470 59.940 D-480p 720x480 31 .470 59.880 D-575p 720x575 31 .250 50.00 0 D-SV GA 80 0x600 37 .879 60.320 D-XGA 1 024x7 68 43.363 60.000 D-WXGA 1 1366x7 68 48.360 60.0 00 D-WXGA 2 1360x7 68 47 .700 60.00 0 D-WXGA 3 137 6x7 68 48.360 60.00 0 D-WXGA 4 1360x7 68 56.1 60 72.[...]

73 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 1 4.57” x 7 .36” x 1 9.37” (370 mm x 187 mm x 492 mm) (Not including raised portions) Net Weight 28.7 lbs (1 3.0 kg) Feet Adjustment 0˚ to 6.5˚ P anel Resolution LCD Panel Sy stem 1 .3” TFT A ctive Matrix type, 3 panels Panel[...]

7 4 Optional Parts Lens Replacement The lens of this projector can be replaced with other optional lens. This f eature enables y ou to use the projector for wide v ariet y of uses. F or inst allation and replacement of the lens, alw ays contact the sales dealer . The projector lens must be installed or replaced by well-trained sales or service engi[...]

75 Configurations of T erminals ANAL OG/ MONIT OR OUT (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ow er Horiz. sync. Ground (V ert. sync.) DDC Data Sense 0 V ert. sync. DDC Cloc k 9 13 1 0 12 1 1 14 15 CONTROL P[...]

7 6 Put the label belo w (supplied) on in a prominent place of the projector ’ s body while it is loc ked with a PIN code. While the projector is locked with the PIN code... Appendix When hanging the projector from the ceiling, the logo looks upside down. T o display the logo in correct direction, put the logo plate (supplied) on the rev ersed lo[...]

77 Dimensions 3.94 (100) 14.57 (370) 5.75 (146) 17.32 (440) 13.58 (345) 4.13 (105) 5.20 (132) 4.33 (110) 4.33 (110) 7.36 (187) 6.5º MAX Screw Holes f or Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 2.05 (52) 2.05 (52) Unit: inc h (mm) Appendix[...]

78 Serial Control Interface Appendix Appendix This projector pro vides a function to control and monitor the projector's operations by using the R S-232C serial port. Connect a RS-232C serial cross cable to CONTR OL PORT on the projector and serial port on the PC. (See p.20) Launc h a communication sof tware provided with PC and setup the comm[...]

79 The command is sent from PC to the projector with the format belo w; 'C' [Command] 'CR' Command: t wo c haractors (ref er to the command table below . -The projector decodes the command and ret urns the 'A CK' with the format below; 'A CK' 'CR' -When the projector can not decode the command, it r[...]

80 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (refer to the command table below . The projector decodes the command and ret urns the 'Charactor string' with the format belo w; For mat Command F unction Projector Ret urn P[...]

© C ANON INC . 2007 CANON INC. 30-2, Shimomar uko 3-chome, Ohta-ku, T okyo 146-8501, Japan CANON U .S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANAD A, INC. 6390 Dixie Road Mississauga, Ontar io L5T 1P7 Canada CANON LA TIN AMERICA, INC. 703 W aterford W ay Suite 400 Miami, Flor ida 33126 U.S.A. CANON MEXICANA, S. de R.L. de C[...]