Chrysler 2005 Town and Country manual

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE .............................. 8 7 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ...................................[...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number ............... 6 䡵 V ehicle Modifications / Alterations ........... 7 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entir e manual you may miss important information. Observe all W arnings and Cautions. VEHICLE IDE[...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 3 䡵 Sentry Key ............................ 1 3 ▫ Replacement Keys ...................... 1 5 ▫ Customer Key Programming .............. 1 5 [...]

䡵 V ehicle Theft Alarm — If Equipped ........... 2 7 䡵 Sliding Side Door ........................ 3 0 ▫ Sliding Door Open Flash ................. 3 1 ▫ Power Sliding Door — If Equipped ......... 3 1 ▫ Child Protection Door Lock ............... 3 4 䡵 Liftgate ............................... 3 5 ▫ Power Liftgate — If Equipped ....[...]

䡵 Engine Break-In Recommendations ........... 8 2 䡵 Safety T ips ............................ 8 3 ▫ Exhaust Gas .......................... 8 3 ▫ Safety Checks Y ou Should Make Inside The V ehicle ...................... 8 4 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle .......................... 8 5 THINGS TO KNOW BEFORE S[...]

A WORD ABOUT YOUR KEYS Y ou can insert the double sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal The sh[...]

NOTE: The power window switches, radio, power outlets, and removable console (if equipped), will r emain active for up to 45 seconds after the ignition switch has been turned off. Opening a vehicle fr ont door will cancel this feature. W ARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could[...]

chip (transponder) embedded into them. Only keys that have been programmed to the vehicle can be used to start and operate the vehicle. The Sentry Key Immobilizer System does not need to be armed or activated. Operation of the system is automatic regar dless of whether or not the vehicle is locked or unlocked. During normal operation, the Theft Ala[...]

All of the keys provided with your new vehicle have been programmed to the vehicle electr onics. Replacement Keys NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it can not be programmed to any other vehicle. At the time of purchase, the origi[...]

4. Insert a blank Sentry Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off. The new Sentry Key has been programmed. The Keyless Entry T ransmitter will also be programmed during this procedure. Rep[...]

NOTE: • The front courtesy over head console, door courtesy and liftgate lights do not turn on if the dimmer control is in the interior lights ON position (extreme top position). • The illuminated entry system will not operate if the dimmer control is in the “ defeat ” position (extr eme downward position). DOOR LOCKS Manual Door Locks Lock[...]

W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsu[...]

locks will not operate. This prevents you fr om acciden- tally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is open, as a reminder to r emove the key . If you press the power door lock switch while the sliding door is open, [...]

Auto Unlock On Exit — If Equipped The doors will unlock automatically on vehicles with power door locks if: 1. The Auto Door Locks featur e is enabled and the Auto Unlock On Exit feature is enabled, 2. the transmission was in gear and the vehicle speed returned to 0 mph (0 km/h), 3. the transmission is in NEUTRAL or P ARK, 4. any door is opened ([...]

Three button transmitters will pr ovide basic UNLOCK, LOCK and P ANIC functions. Six button transmitters will provide functions that allow the same basic operation as the three button, but may also be used to Open/Close the optional power liftgate, left power sliding door , or right power sliding door . Other options of the system allow you to turn[...]

T o unlock the doors and liftgate: Press and r elease the UNLOCK button on the transmitter once to unlock the driver ’ s door side of the vehicle, or twice to unlock all doors and liftgate. The illuminated entry system also turns on. The Remote Unlock Driver ’ s Door 1st feature can be enabled or disabled by performing the following proce- dure[...]

Using The Panic Alarm: T o turn the panic alarm feature ON or OFF , press and hold the P ANIC button on the transmitter for at least one second and release. When the panic alarm is on, the headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on. The panic alarm will stay on for 3 minutes unless you[...]

T o Open/Close Left Power Sliding Door — If Equipped Press the LEFT button twice within five seconds to open/close the left power sliding door . If the button is pushed while the door is being power closed, the door will reverse to the full open position. If the vehicle is not equipped with a left power sliding door and the door is closed and loc[...]

T o T urn Off “ Flash Lights On Lock/Unlock ”— If Equipped If desired, the “ Flash Lights On Lock/Unlock ” featur e can be turned on and off by performing the following procedur e: 1. Pr ess the LOCK button for 5 to 10 seconds. 2. While the LOCK button is pr essed, (after 5 seconds) press the UNLOCK button. Release both buttons. The “ F[...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. If your Remote Keyless Entr[...]

2. Remove and r eplace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the transmitter case snap two halves together . Make sure ther e is an even “ gap ” between the two halves. T est transmitter operation. V[...]

T o arm the system: Remove the key from the ignition switch and either: 1. Pr ess a power door lock button while the driver ’ so r passenger ’ s door is open. 2. Pr ess the LOCK button on the keyless entry transmit- ter . After the last door is closed, or if all doors are closed, the system will arm itself in about 16 seconds. During that time,[...]

• The system remains armed during liftgate entry , press- ing the liftgate button will not disarm the system, if someone enters the vehicle through the liftgate and opens any door the alarm will sound. • When the system is armed, the doors can not be unlocked from the interior power door lock switches. The V ehicle Theft Alarm system is designe[...]

SLIDING SIDE DOOR The sliding door may be opened from the inside or the outside. Pull out on the outside handle to open the sliding door from the outside. T o open the sliding door from the inside, pr ess the button on the grab handle and open the door . T o keep your door operating properly , observe the fol- lowing guidelines: • Always open the[...]

NOTE: The driver ’ s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the fuel door . Sliding Door Open Flash When the sliding door(s) are opened, the left and right exterior hazard lights will flash for 12 seconds to alert other drivers in the area t[...]

The power sliding door may also be opened by pressing the switches on the overhead console or the switch located on the trim panel just in front of the sliding door . T o keep your door operating properly , observe the fol- lowing guidelines. • Always open the door smoothly . • A void high impacts against the door stop when open- ing the door m[...]

If the inside or outside door handles are used while the power sliding door is activated, the power sliding door feature will be canceled and the door must be opened or closed manually . T o avoid unintentional operation of the power sliding door from the r ear seats, press the button located in the overhead console to disable the switches for the [...]

Child Protection Door Lock T o provide a safer envir onment for small children riding in the rear seats, the sliding doors ar e equipped with a child protection door lock system. W ARNING! T o avoid trapping anyone in the vehicle in a colli- sion. Remember that the sliding doors can only be opened from the outside door handle or the switches locate[...]

When the child lock system is engaged the door can be opened only by using the outside door handle, remote keyless entry transmitter , switches on the overhead con- sole or the switches located on the trim panel just in front of the power sliding door , even though the inside door lock is in the unlocked position. The power sliding door will operat[...]

Once unlocked, on vehicles equipped with power locks, the liftgate can be opened or closed without using the key . T o open the liftgate, depress the liftgate r elease switch located on the underside of the license plate bar and pull the liftgate open with one fluid motion. If the liftgate is locked and is not equipped with a powered liftgate, pr e[...]

The power liftgate may also be opened by pressing the button located on the overhead console. When the remote keyless entry transmitter button is pressed and the “ Lamp Flash ” featur e is enabled, the tail lights will flash to signal that the liftgate is opening or closing. W ARNING! During power operation, personal injury or cargo damage may [...]

• The power liftgate must be in the full open or close positions for any of the buttons to operate. If the liftgate is not in the full open or close positions it must be opened or closed manually . • If the liftgate release button is activated while the power liftgate is closing, the liftgate will reverse to the full open position. • The powe[...]

Gas props support the liftgate in the open position. However , because the gas pressur e drops with tempera- ture, it may be necessary to assist the pr ops when opening the liftgate in cold weather . WINDOWS Power V ent Windows Switches on the driver ’ s door trim panel let the driver operate the two vent windows from the driver ’ s seat. Power[...]

Power Windows Y ou can control either fr ont window using switches on the driver ’ s door trim panel. There is a single switch on the passenger ’ s door trim panel which operates the passenger door window . The switches will operate only when the ignition switch is in the ON or ACCESSORY position. Power W indow Switches 40 THINGS TO KNOW BEFORE[...]

Auto Down Feature — If Equipped The driver ’ s window switch has an auto down feature. Press the window switch past the detent, r elease, and the window will go down automatically . T o open the window part way , press the window switch part way and release it when you want the window to stop. The power window switches remain active for up to 4[...]

OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the front and rear seat belts for the driver and all passengers, fr ont airbags for both the driver and front passenger , driver inflatable knee blocker and if equipped, window bags for the driver and passengers seated next to a[...]

W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly . Buckle up even though you are an excellent driver [...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat[...]

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the r ear seats. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go a[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “ click ” . W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A b[...]

4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can increas[...]

6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , ch[...]

As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you ’ ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position. Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ [...]

2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 ° to create a fold that begins immediately above the latch plate. 3. Slide the latch plate upwar d over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clear[...]

Center Lap Belts The center seating positions have a lap belt only . T o fasten the lap belt, slide the latch plate into the buckle until you hear a “ click ” . T o lengthen the lap belt, tilt the latch plate and pull. T o remove slack, pull the loose end of the webbing. W ear the lap belt snug against the hips. Sit back and erect in the seat, [...]

NOTE: These devices are not a substitute for pr oper seat belt placement by the occupant. The seat belt still must be worn snugly and positioned properly . The pretensioners ar e triggered by the fr ont airbag con- trol module (see Fr ont Airbag Section). Like the front airbags, the pretensioners ar e single use items. After a collision that is sev[...]

2. T urn the ignition key to the RUN position (engine does not need to be running), and wait for the Seat Belt W arning Light to turn off. 3. W ithin 60 seconds, unbuckle and then re-buckle the driver ’ s seat belt at least three times, ending with the seat belt buckled. 4. T urn the ignition key to the OFF position. A single chime will sound to [...]

W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Driver And Front Passenger Supplemental Restraint Systems (SRS) — Airbags This veh[...]

Also, the front passenger airbag is certified to the Federal regulations that define Occupant Classification (Refer to “ Occupant Classification System ” in this section). This vehicle may also be equipped with a driver inflat- able knee blocker located on the instrument panel below the steering column. This vehicle may also be equipped with wi[...]

W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflating. • If your vehicle is equipped with windo[...]

Here ar e some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should always ride buckled up in a rear seat. Infants in rear facing child r estraints should NEVER ride in the front seat of a vehicle with a passenger fr ont airbag. An airbag deployment can cause severe injury or deat[...]

W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won ’ t deploy at all. Always wear your seat belts even though you have airbags. • Being too close to the steering wheel or instru- ment panel during front a[...]

• Knee Impact Bolster • Driver Inflatable Knee Blocker • Front Passenger Seat Occupant Classification System (OCS) — If Equipped − Occupant Classification Module − Passenger Airbag Disabled (P AD) Indicator Light − Interconnecting W iring − Bladder Assembly − Belt T ension Sensor How The Airbag System W orks • The Occupant Restr[...]

first turned on. After the self-check, the AIRBAG warning light will turn off. The P AD indicator light will function normally (Refer to “ Passenger Airbag Disable (P AD) Indicator Light ” in this section). If the ORC detects a malfunction in any part of the system, it turns on the AIRBAG warning light either momen- tarily or continuously . A s[...]

• The Side Impact SRS W indow Bags are designed to activate only in certain side collisions. When the ORC and the side impact sensors (with side impact option) detects a collision requiring the window bags to inflate, it signals the inflators on the crash side of the vehicle. A quantity of nontoxic gas is generated to inflate the window bag. The [...]

• If your vehicle contains a Passenger Airbag Disable indicator light, it will be equipped with the Occupant Classification System (OCS). The OCS system will classify an occupant into a size category based on sensor readings fr om within the seat cushion. Occu- pants should try to remain in a normally seated position. If the occupant ’ s weight[...]

OFF when the OCS has determined that the occupant size category is a child. Also, when the seat is empty or an object that weighs less than a predetermined thr eshold is placed on the seat, the light will remain OFF . (The P AD indicator light is an amber light located on the center of the instrument panel above the radio.) For almost all sizes of [...]

• The Occupant Classification Module (OCM) — If Equipped is located beneath the front passenger seat. The OCM classifies the occupant into one of three size categories based on the input from the Bladder Assem- bly and Belt T ension Sensor . The size categories in- clude empty , child, and adult. The OCM sends the Occupant Classification to the[...]

(OCS) to properly classify the fr ont passenger and calcu- late the proper airbag deployment. Do not make any modifications to the front passenger seat components, assembly , or to the seat cover . W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertentl[...]

• At no time should any supplemental restraint system (SRS) component or SRS related component or fas- tener be modified or replaced with any part except those which are appr oved by DaimlerChrysler/ Mopar . If A Deployment Occurs The airbag system is designed to deploy the airbags when the ORC and impact sensors detect a moderate-to- severe coll[...]

• It is not advisable to drive your vehicle after the airbags have deployed. If you are involved in another collision, the airbags will not be in place to protect you. W ARNING! Deployed airbags, seat belt pretensioners and driver inflatable knee blocker cannot protect you in an- other collision. Have the airbags, seat belt preten- sioners, drive[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

• The light remains on or flickers after the 6 to 8 second interval. • The light flickers or comes on and remains on while driving. DaimlerChrysler Corporation Integrated Child Seat — If Equipped Operating instructions for this seat ar e included with the seat. If the instructions ar e not with the seat or in the Owner ’ s Manual Package, r[...]

W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper [...]

infant carriers do, so they can be used rearwar d-facing by children who weigh mor e than 20 lbs (9 kg) but are less than one year old. • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a fr ont passenger airbag. An airbag deployment could cause severe injury or death to infants in this position. Older Children [...]

• Check belt fit periodically . A child ’ s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. If this doesn ’ t help, move the child to the center rear seating position and use the lap belt. Never allow a child to put the shoulder b[...]

Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it, befor e you buy it. • The restrain[...]

• Buckle the child into the seat according to the child restraint manufactur er ’ s directions. • When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Don ’ t leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seatbacks and cause ser[...]

head restraint posts. Except for bench seats with split seatbacks, when the tether anchorage is used in the center seating position, the strap should be positioned straight over the top of the seatback. For bench seats with split seatbacks, route the tether between the seatbacks. When using the tether anchorages in the center position on 3rd r ow s[...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Child restraint systems having attachments designed to connect to the lower anchorages are now available. Child restraints hav[...]

at one time. Instead, you may install one child restraint at the center position, or one child restraint at each of the right and left positions. W ARNING! Fleet V ehicles Only: Do not install child restraint systems equipped with LA TCH attachments at all three seating positions in the seat at one time. The LA TCH anchorages in this seat are desig[...]

W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer ’ s directions exactly when installing an infant or child restraint. T ransporting Pets Airbags deploying in the front seat could harm your pet. An u[...]

W ARNING! Rear Facing Infant restraints must never be secured in the passenger seat of a vehicle with a passenger airbag. In an accident a passenger airbag may deploy causing severe injury or death to infants riding in rear facing infant restraints. Restraining Infants and Small Children with Seat Delete Feature (Commercial V ehicles Only) There ar[...]

child restraints or belt-positioning booster seats should ride properly buckled in the passenger seat with the seat adjusted to the rear most position. Never allow children to slide the shoulder belt behind them or under their arm. T ether Installation For Commercial V ehicles W ith Rear Seat Delete T o secure the child r estraint upper tether stra[...]

3. Follow the child r estraint manufacturer ’ s directions for proper use of connecting the child r estraint to the extended tether strap. 4. If necessary , raise the passenger seat head restraint to allow the tether strap to be routed under the head restraint. 5. Route the tether strap beneath the head r estraint between the two head restraint p[...]

6. Using the hook attached to the child r estraint tether strap, attach the child restraint tether strap to the metal ring on the vehicle tether anchor . 7. Following the child seat manufactur er ’ s instructions, tighten the child restraint tether strap. 8. If necessary , reposition the seat head restraint. 9. Inspect the tether anchor strap for[...]

While cruising, brief full-thr ottle acceleration, within the limits of local traffic laws, contributes to a good br eak-in. W ide open throttle acceleration in low gear can be detrimental and should be avoided. The engine oil installed in the engine at the factory is a high quality energy conserving type lubricant. Oil changes should be consistent[...]

W ARNING! If you are required to drive with the deck lid/liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays and loose parts. D[...]

Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tr ead wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tr ead and sidewall for cuts or cracks. Check wheel nuts for tightness, and tires (includ- ing spare) for pr oper pressure. Lights Have som[...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors ............................... 9 2 ▫ Inside Day/Night Mirror ................. 9 2 ▫ Automatic Dimming Mirror — If Equipped .... 9 2 ▫ Driver ’ s Side Outside Mirror Auto Dimmer — If Equipped .......................... 9 3 ▫ Exterior Mirrors Folding Featur e ..........[...]

䡵 Seats ................................ 1 0 8 ▫ Manual Front & Second Row Seat Adjuster . . . 108 ▫ 8 – W ay Driver ’ s Power Seat — If Equipped . . . 109 ▫ 4 – W ay Passenger ’ s Power Seat — If Equipped ......................... 1 0 9 ▫ Adjustable Head Restraints — If Equipped . . . 1 10 ▫ Heated Seats — If Equipp[...]

䡵 Lights ............................... 1 3 8 ▫ Interior Lights ....................... 1 3 8 ▫ Park Lights .......................... 1 3 9 ▫ Headlights .......................... 1 3 9 ▫ Automatic Headlights — If Equipped ....... 1 4 0 ▫ Daytime Running Lights (Canada/Fleet V ehicles Only) ....................... 1 4 1 ▫ Lights-O[...]

▫ T o Accelerate For Passing ............... 1 5 3 䡵 Overhead Console — If Equipped ........... 1 5 4 ▫ Courtesy/Reading Lights ................ 1 5 4 ▫ Sunglass Storage ...................... 1 5 5 ▫ Compass/T emperature Display ........... 1 5 5 ▫ Mini-T rip Computer ................... 1 5 8 ▫ Electronic V ehicle Information Cent[...]

䡵 Storage .............................. 1 7 7 ▫ Front Seat Storage Bin — If Equipped ....... 1 7 7 ▫ Second Row Seat Storage Bins — If Equipped ......................... 1 7 7 ▫ Overhead Rail System — If Equipped ....... 1 7 8 ▫ Removable Floor Console W ith Fold-In-Floor Seating — If Equipped ................. 1 7 9 ▫ Removabl[...]

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjuste[...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Driver ’ s Side Outside Mirror Auto Dimmer — If Equipped This mirror automatically adjusts for annoying headlight glare fr om vehicles behind you. Y ou can turn th[...]

Outside Mirror — Driver ’ s Side Adjust the outside mirror to center on the adjacent lane of traffic, with a slight overlap of the view obtained on the inside mirror . Outside Mirror — Passenger ’ s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the portion of the mirror closest to the vehicle. This ty[...]

Select a mirror and pr ess one of the four arrows for the direction you want the mirr or to move. Driver ’ s power mirror pr eselected positions can be con- trolled by the optional Memory Seat Featur e. Refer to the Memory Seat paragraph in section 3 of this manual. Heated Remote Control Mirrors — If Equipped These mirrors ar e heated to melt f[...]

HANDS – FREE COMMUNICA TION (UConnect ™ ) — IF EQUIPPED UConnect ™ is a voice-activated, hands-free, in-vehicle communications system. UConnect ™ ; allows you to dial your cellular phone using simple voice commands (e.g., “ Call Mike W ork ” or “ Dial 248-555-1212 ” ). Y our cellular phone ’ s audio is transmitted through your v[...]

The rearview mirr or contains the microphone for the system and the control buttons that will enable you to access the system. The diagram below shows the mirror with the appropriate buttons. Individual button behavior is discussed in the “ Operation ” Section. The UConnect ™ system can be used with any Hands Free Pr ofile certified Bluetooth[...]

• Y ou can say ⬙ Dial ⬙ at the ⬙ Ready ⬙ prompt. When prompted for the phone number you wish to dial, say the phone number ( ⬙ 123 456 7890 ⬙ ). • Alternatively as you become familiar with the UCon- nect ™ system, you can combine the commands and say ⬙ Dial 123 456 7890 ⬙ . Pairing a Cellular Phone to the UConnect ™ System T[...]

system will use the priority 3 cellular phone when you make a call. Y ou can select to use a lower priority cellular phone at any time. Making a Phone Call Using Digit Dialing • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt, says ⬙ Dial ⬙ followed by the phone number you wish to dial. For example, you can say ⬙[...]

The UConnect ™ system will allow you to enter up to 32 names into the phonebook with each name having up to four associated phone numbers and designations. Edit Entries in the UConnect ™ Phonebook • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt, say ⬙ Phonebook Edit ⬙ . • Y ou will then be asked for the nam[...]

• After you enter the name, the UConnect ™ system will ask you if you wish to delete the home, work, mobile, or pager number for this entry . Delete All Entries in the UConnect ™ Phonebook • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt, say ⬙ Phonebook Delete All ⬙ . • The UConnect ™ system will ask yo[...]

Answer or Reject an Incoming Call - No Call Currently in Progress When you receive a call on your cellular phone, the UConnect ™ system will interrupt the ster eo audio and will ask if you would like to answer the call by pressing the ’ Phone ’ button. Press the ’ Phone ’ button to answer the call. T o reject the call, pr ess the ’ Phon[...]

Conference Call When two calls are in pr ogress (one active and one on hold), press the ’ Phone ’ button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-W ay Calling T o initiate three-way calling, pr ess the ’ V oice Recogni- tion ’ button while a call is in progr ess and make a s[...]

Delete Paired Cellular Phones • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt, say ⬙ Setup Phone Pairing ⬙ . • At the next prompt, say ⬙ Delete ⬙ . • Y ou will be asked to say the name of the phone that you wish to delete. Y ou can either say the name of the phone that you wish to delete or you can say ?[...]

Select a Lower Priority Paired Cellular Phone • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt, say ⬙ Setup Select Phone ⬙ . • When prompted, say the phone name of the cellular phone you wish to use, or say ⬙ List Phones ⬙ to hear a list of all the phones that have been paired to your UConnect ™ system. T [...]

Barge In - Overriding Prompts The ’ V oice Recognition ’ button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately . For example, if a prompt is playing ⬙ W ould you like to pair a phone, clear a ѧ⬙ , you could press the ’ V oice Recognition ’ button and say ⬙ Pair A Phone ⬙ to s[...]

Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect ™ system. By dialing a number with your paired Bluetooth ™ cellular phone, the audio will be played through your vehicle ’ s ster eo sys- tem. The UConnect ™ system will work the same as if you dialed the number us[...]

SEA TS Manual Front & Second Row Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar up and move the seat to the desired position. Release the bar to lock the seat into position. Using body pressur e, move forward and r earward on the seat to be sure the seat adjusters have latched. W ARNING! Adjust the seat onl[...]

8 – W ay Driver ’ s Power Seat — If Equipped The driver ’ s power seat switches are located on the outboard side of the seat. The fr ont switch controls up/down, forward/r earward, and tilt adjustment. The rear switch contr ols the seatback recline adjustment. 4 – W ay Passenger ’ s Power Seat — If Equipped The passenger ’ s power s[...]

Adjustable Head Restraints — If Equipped Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Pull up or push down on the head restraint so that the upper edge is as high as practical. T o raise the head restraint, pull up on the head restraint. T o lower the head restraint, depress the r elease tab loca[...]

Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for the heated seats ar e located on the instrument panel above the radio. Y ou may choose LOW , HIGH or No Heat. The switch position as well as an indicator light will show when the LOW or HIGH heat is ON. Heated Seat Switches UNDERST ANDING THE FEA[...]

Manual Reclining Seats — If Equipped The recliner mechanism contr ol is on the outboard side of the seat. T o recline, lean forwar d slightly , lift the lever , then push back to the desired position and r elease the lever . Lean forward and lift the lever to r eturn the seatback to its normal position. Using body pressur e, lean forward and r ea[...]

W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked. Manual Lumbar — If Equipped The lumbar adjustment handle is located inboard under the armrest.[...]

T o Fold Second Row Seats 1. Move the fr ont seat fully forward, lower the head restraint and raise the armr ests on the second row seat. 2. Pull up on the storage bin latch to open cover . 3. Pull up on the seatback r ecliner lever located on the outboard side of the seat and fold the seatback down. NOTE: The cupholder must be in the closed positi[...]

4. Pull r earward on the release strap located at the r ear of the seat and tumble the seat forward into the storage bin. 5. Close the storage bin cover . T o Unfold Second Row Seats 1. Open the storage bin cover . 2. Pull up on the handle to lift the seat out of the storage bin and push the seat rearwar d to latch the seat anchors. Seat Release St[...]

3. Pull up on the seatback r ecliner lever located on the outboard side of the seat, to r eturn the seatback to its full upright position. 4. Close the storage bin cover and adjust the head restraint to the desir ed position. T o Fold Third Row Seats 1. Lower the head r estraint to its full down position. 2. Pull r elease strap marked “ 1 ” loc[...]

3. Pull r elease strap marked “ 2 ” to release the anchors. 4. Pull r elease strap marked “ 3 ” and tumble the seat rearwar d into the storage bin. Release Strap 2 Release Strap 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 17 3[...]

T o Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull r elease strap marked “ 1 ” to unlock the recliner . 3. Pull r elease strap marked “ 3 ” to return the seatback to its full upright position. 4. Adjust the head r estraint to the desire[...]

W ARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. T ailgate Mode 1. Pull r elease strap “ 2 ” , then pull release strap “ 3 ” to rotate the entir e seat rearwar d. Release Strap s2&3 UNDERST ANDING THE FEA TUR[...]

2. T o restor e the seat to its upright position, lift up on the seatback and push forward until the anchors latch. W ARNING! T o avoid serious injury or death, never operate the vehicle with occupants in the third row seat, while in the tailgate mode. Easy Access Seating The passenger ’ s and driver ’ s side second row seats can be tilted forw[...]

T o tilt the seat on vehicles equipped with fold-in-floor seating, pull forward on the r elease strap located on the front of the seat between the seat back and seat cushion and tilt the seat fully forward. T o return the seat, lower the seat and ensure that it is fully latched. W ARNING! In the event of a collision you could be injured if the seat[...]

3. Pull up on the seatback r elease lever located on the outboard side of the seat and fold the seatback down. If the head restraint contacts the r ear of the front seat, move the front seat forwar d on its tracks. 4. Pull up on the r elease handle and tumble the seat fully forward. Seatback Release Lever Seat Release Handle 122 UNDERST ANDING THE [...]

5. Pull the r elease bar located at the bottom front edge of the seat to disengage the front attachments. 6. The seat assembly can now be r emoved from the vehicle and moved on its Easy Out 威 Rollers. T o reinstall the seat, r emove any obstructions from the floor in front of the seat and ensur e the head restraint is in its full downward positio[...]

50/50 Fold & T umble Rear Seat Removal 1. Lower the head r estraint and pull up on release lever “ 1 ” to fold the seatback down. 2. Pull up on r elease lever “ 2 ” and tumble the seat fully forward. Release Lever Location Release Lever 2 Location 124 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

3. Pull the r elease strap “ 3 ” located at the bottom of the seat to disengage the front attachments. 4. The seat assembly can now be r emoved from the vehicle and moved on its Easy Out 威 Rollers. T o reinstall the 50/50 r ear seat, lower the head restraint to the full down position, tilt the seat forward and engage the front floor attachmen[...]

3 – Passenger Bench Seats Release levers are located on the r ear leg assemblies, near the floor . T o remove the seat, squeeze each r elease handle and rotate downwar ds to deploy the wheels. A lock indicator button pops up when the seat is unlocked. The seat assembly can now be removed fr om the vehicle and moved on its Easy Out 威 Rollers. T [...]

W ARNING! If not properly latched, the bench seats could be- come loose. Personal injuries could result. After reinstalling these seats, be sure the red indicator button on the release handles return into the handles. Plastic Grocery Bag Retainer Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all r ear se[...]

Rear-Most Bench Seat The seat position can be adjusted fore and aft to any of three positions - normal (r earward), intermediate, and full forward. In this way varying needs for legr oom and cargo space behind the seat can be accommodated. The release lever is below the seat and is accessible fr om the front and back of the seat. Rear Seat Descript[...]

1. Normal Seating— The 2nd and 3rd r ow seats are installed. The 3r d row bench seat is in the full rear position on the tracks. 2. Incr eased Storage— Increased storage ar ea is provided by adjusting 3rd r ow bench seat to the intermediate track position. Rear seat- ing for 3 passengers (children) is still pr ovided. 3. Additional Storage— T[...]

4. Auxiliary Seating — The middle quad seats are r emoved from the vehicle. The 3 – passenger bench seat can be installed in either the second or third r ow . Rear Quad and 50/50 Seating Flexibility The seats may be used with either or both seatbacks folded forward for additional storage space, or with either or both seats removed fr om the veh[...]

NOTE: Driving with the 2nd-row seats in the tumbled position is not recommended when passengers occupy the 3r d row seats. This position is intended only to increase available cargo ar ea without requiring r emoval of the seats. Do not leave the head restraint stor ed between the cushions for extended periods of time or inadvertent damage to the se[...]

W ARNING! • Not all head restraints in this vehicle are the same. Head restraints from one seating position should not be removed and installed in any other seating posi- tion. In a collision, serious injury or death may result if the proper head restraint is not installed on each seat. • The cargo area in the rear of the vehicle should not be [...]

Y our vehicle may have been delivered with two Remote Keyless Entry transmitters. One or both transmitters can be linked to either memory position. The memory system can accommodate up to four transmitters, each one linked to either of the two memory positions. Setting Memory Positions and Linking Remote Keyless Entry T ransmitter to Memory NOTE: E[...]

5. T urn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 6. T urn the ignition switch to the OFF position and remove the key . 7. Pr ess and release the SET (S) button located on the driver ’ s door . A chime will sound signaling that you are in the memory set mode. 8. W ithin 5 seconds, press and r ele[...]

T o recall the memory settings for driver one, pr ess memory button number 1 on the driver ’ s door or the Unlock button on the Remote Keyless Entry transmitter linked to memory position 1. T o recall the memory setting for driver two, pr ess memory button number 2 on the driver ’ s door or the Unlock button on the Remote Keyless Entry transmit[...]

T o disable another transmitter linked to either memory position, repeat steps 1-5 for each transmitter . NOTE: Once programmed, all transmitters linked to memory can be easily enabled or disabled at one time. Refer to the Remote Linked to Memory ⬙ Customer Pro- grammable Features ⬙ in the Electr onic V ehicle Informa- tion Center (EVIC) for mo[...]

Next, push to the left the safety catch located under the front edge of the hood, near the center . Use the hood prop r od to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 12 inches (30 cm) and then drop it. This should secur e both latches. Never d[...]

LIGHTS All of the lights, except the hazard warning lights, ar e controlled by switches to the left of the steering column on the instrument panel. Interior Lights Interior lights are turned on when a door or liftgate is opened, the keyless entry transmitter is activated, or when the dimmer control is moved to the extr eme top. The interior lights [...]

Park Lights T urn this switch to the first detent to turn the park lights on. This also turns on all instrument panel lighting. Headlights T urn the headlight switch to the 2nd detent to turn the headlights and park lights on. This also turns on all instrument panel lighting. T o change the brightness of the instrument panel lights, rotate the dimm[...]

Interior light Defeat (OFF) Rotate the dimmer control to the OFF position (extreme bottom). The interior lights will remain of f when the doors or liftgate are open. Parade Mode (Daytime Brightness Feature) Rotate the dimmer control to the first detent. This feature brightens the odometer , radio and overhead displays when the park lights or headli[...]

Daytime Running Lights (Canada/Fleet V ehicles Only) The Daytime Running Lights will come on whenever the vehicle is running, the headlights ar e off, and the parking brake is off. The headlight switch must be used for normal night time driving. Lights-on Reminder If the headlights or the park lights are left on, or if the dimmer control is in the [...]

remain on. r efer to Electronic V ehicle Information Center (EVIC) “ Customer Programmable Featur es ” for more information. If the headlights are turned of f before the ignition, they will turn off in the normal manner . NOTE: The headlights must be turned off within 45 seconds of turning the ignition off to activate this featur e. Front Fog L[...]

T urn Signal W arning If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about one mile with the turn signals on, a chime will sound to alert the driver . Headlight Low/High Beam Selector Switch Pull the multifunction lever toward the steering wheel to switch the headlights between HIGH and LOW beam. Passing[...]

NOTE: Always remove any build-up of snow that prevents the windshield wiper blades fr om returning to the OFF position. If the windshield wiper switch is turned OFF and the blades cannot return to the OFF position, damage to the wiper motor may occur . T o use the washer , press the end of the multifunction lever in when spray is desired, the washe[...]

W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use. Intermittent W iper System Use the intermittent wipers when weath[...]

TIL T STEERING COLUMN — IF EQUIPPED T o tilt the column, pull the small lever , located behind the turn signal control, towar d you and move the wheel up or down, as desired. Release the lever to lock the wheel firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable steering col- umn, yo[...]

TRACTION CONTROL SWITCH — IF EQUIPPED The TRAC indicator , located below the instrument clus- ter odometer , will light up when the T raction Control is in use. T o turn the system OFF , press the TRAC OFF switch located on the steering column, until the TRAC OFF indicator below the instrument cluster odometer lights up. T o turn the system back [...]

NOTE: • The T raction Control System indicator comes on each time the ignition switch is turned ON. This will occur even if you used the switch to turn the system OFF . • The T raction Control will make buzzing or clicking sounds when in operation. REAR P ARK ASSIST SYSTEM — IF EQUIPPED This system is used to help drivers determine if an obst[...]

W ARNING! Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, other vehicles, obstructions, and blind spots before backing up. Failure to do so can result in serious personal injury or death. The display contains two s[...]

ADJUST ABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelerator pedals to move toward or away fr om the driver to provide improved position with the steering wheel. The adjust- able pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. The switch is located on the right [...]

• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control System is ON. The following messages will be displayed on vehicles equipped with the Electronic V ehicle Information Sys- tem (EVIC) if the pedals are attempted to be adjusted when the system is locked out ( ?[...]

T o Activate: Push the “ ON/OFF ” button once and the CRUISE indi- cator located below the instrument cluster odometer will illuminate showing the electronic speed contr ol system is on. T o turn the system OFF , push the “ ON/OFF ” button again and the system and indicator will turn off. W ARNING! Leaving the Electronic Speed Control syste[...]

T o V ary the Speed Setting: When the speed control is set, speed can be incr eased by pressing and holding the “ RESUME/ACCEL ” button. When the button is released, a new set speed will be established. T apping the “ RESUME/ACCEL ” button once will result in a 2 mph (3 km/h) speed increase. Each time the button is tapped, speed increases s[...]

W ARNING! Speed Control can be dangerous where the system can ’ t maintain a constant speed. Y our vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don ’ t use Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery . OVERHEAD CONSOLE — IF EQUIPPED [...]

The lights also turn on when a front door , a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry , the lights will also turn on when the unlock button on the transmitter is pressed. The area ar ound the instrument panel cupholders is also illuminated from a light in the over head console. This light is tur[...]

turns in an area fr ee from lar ge metal or metallic objects, the “ CAL ” symbol will turn off and the compass will function normally . Manual Compass Calibration If the compass appears erratic and the “ CAL ” symbol does not appear , you must put the compass into the Calibration Mode manually . T o put into a Calibration Mode: T urn on the[...]

T o set the variance: T urn the ignition switch ON and set the display to Comp/T emp. On vehicles equipped with a Compass/Mini T rip Computer press the RESET button for approximately 5 seconds. On vehicles equipped with Compass/T emp press and hold the C/T and US/M buttons for 5 seconds. The “ VA R ” symbol will light and the last variance zone[...]

Mini-T rip Computer This displays information on the following: • A verage Fuel Economy (ECO A VG) Shows the average fuel economy since the last reset. • Distance T o Empty (DTE) Shows the estimated distance that can be travelled with the fuel remaining in the tank. This estimated distance is determined using the MPG for the last few minutes. ?[...]

Electronic V ehicle Information Center (EVIC) — If Equipped The Electronic V ehicle Information Center , when the appropriate conditions exist, displays the following W ARNING messages and symbols. Each message is accompanied by a single chime: • TURN SIGNALS ON (with graphic) • PERFORM SER VICE • DOOR AJAR (one or more, with graphic) • L[...]

Customer Programmable Features — If Equipped Press the “ MENU ” button until one of the display choices following appears: Language When in this display you may select one of five lan- guages for all display nomenclature, including the trip computer functions. Press the “ STEP ” button while in this display selects English, Francaise, Deu[...]

Use Factory Settings If “ Ye s ” is selected, all of the customer programmable features will be set to the factory default and not dis- played. If “ No ” is selected you can program the V ehicle Information Center to your own personal prefer ences. Auto Door Locks When this feature is selected, all doors and the liftgate lock automatically [...]

If this feature is not selected, the driver ’ s seat, driver ’ s mirror , adjustable pedals, and radio settings can only return to their memory set positions using the memory recall buttons (1or 2) on the driver ’ s door panel. Any transmitter linked to memory will remain linked, but will not recall the memory positions. The transmitter memor[...]

30, 60, or 90 seconds, or not remain on. Pr essing the “ STEP ” button when in this display will select 30, 60, 90, or “ OFF . ” Headlamp On W ith W ipers (A vailable with Auto Headlights Only) When this feature is selected and the headlight switch has been moved to the “ AUTO ” position, the engine is running and, the fr ont wipers are[...]

W ARNING! A moving garage door can cause injury to people and pets in the path of the door . People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “ stop and reverse ” feature as required by federal safety stan- dards. This includes most garage door opener mod- els manufactured afte[...]

W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run the vehicle ’ s exhaust while training the transceiver . Exhaust gas can cause seri- ous injury or death. W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets a[...]

2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons while keeping the indicator light in view . 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons. Do not release the buttons until step 4 has been completed. NOTE: Some gate operato[...]

7. Firmly pr ess and release the ⬙ learn ⬙ or ⬙ smart ⬙ button. (The name and color of the button may vary by manu- facturer .) NOTE: There ar e 30 seconds in which to initiate step eight. 8. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink button. Repeat the ⴖ press/hold/release ⴖ sequenc[...]

successfully been accepted by HomeLink. (The indicator light will flash slowly and then rapidly .) Proceed with ⬙ Programming ⬙ step four to complete. Using HomeLink T o operate, simply press and r elease the programmed HomeLink button. Activation will now occur for the trained device (i.e. garage door opener , gate operator , security system, [...]

Security If you sell your vehicle, be sure to erase the fr equencies by following the “ Erasing HomeLink Buttons ” instruc- tions in this section. This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This devi[...]

switch rearwar d will activate the Express Open Featur e, causing the sunroof to open automatically . Press and hold the button located to the right of the sunroof switch, to open the vent. The sunr oof can be stopped at any position between closed and full vent. T o close the sunroof fr om the vent position, press and hold the switch forward. Rele[...]

W ARNING! In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof. Y ou could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passengers are properly secured too. Do not allow small children to operate the sunroof. Never allow fingers or other body parts, or any object[...]

ELECTRICAL POWER OUTLETS — IF EQUIPPED T o the left of the instrument panel cup holder are two 12 volt power outlets. The upper outlet is controlled by the ignition switch and the lower outlet is connected directly to the battery . The upper outlet will also operate a conventional cigar lighter unit (if equipped with an optional Smoker ’ s Pack[...]

The lower outlet is protected by an automatic r eset circuit breaker . The automatic circuit br eaker restores power when the overload is removed. The cir cuit breaker also supplies power to the outlet in the removable floor console, when in the front position. Refer to section 3 “ Removable Floor Console ” in this manual. NOTE: If desired, all[...]

CONVENIENCE TRA Y DRA WER AND CUP HOLDERS Instrument Panel Cup Holders The instrument panel cupholders ar e located in a pull out drawer just below the climate controls. When the drawer is pulled out firmly , the arms of the cupholders will spring out. Place the container to be held into one of the cupholders and then push the arm toward the contai[...]

Convenience T ray And Optional Smoker ’ s Package Kit Located between the instrument panel cupholders is a convenience tray that has been designed to hold miscel- laneous small items. NOTE: The convenience tray should never be used for ashes without the optional ash receiver in place. Perma- nent burn marks may result. W ith the optional dealer i[...]

If your vehicle is equipped with quad seats in the 2nd seat position, these cupholders are located on the out- board side of the seat pedestal. NOTE: • The quad seat cupholders will remain upright if the seat is tilted forward. • The quad seat cupholders are designed to br eak away if stepped on. T o return the cupholder to its normal position,[...]

STORAGE Front Seat Storage Bin — If Equipped The storage bin is located under the front passenger ’ s seat. If equipped with a lock, it can be locked with the ignition key . Second Row Seat Storage bins — If Equipped The Seat Storage Bins are located on the floor in fr ont of the second row seats, the ar ea below the covers can be used for st[...]

W ARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched. Do not drive the vehicle with the storage bin cover open. Keep the storage bin cover closed and latched while the vehicle is in motion. Do not operate the storage bin cover while the vehicle is in motion. Overhead Rail System — If Equipp[...]

Removable Floor Console With Fold-in-Floor Seating — If Equipped The removable floor console has a two power outlets, storage tray , light, removable cell phone holder , tissue holder , pen holder and a map holder . It can be removed from the vehicle by pulling the r elease handle inside the floor console. T o remove the console use the following[...]

T o reinstall the console, open the console lid and r emove the storage tray . Pull up on the release handle and slide the console forward to engage the fr ont of the console into the floor tray . Pivot the floor console down until it is seated on the floor tray and release the handle. Pull up on the console to be sure it is firmly attached. W ARNI[...]

T o remove the console use the following pr ocedure: 1. Open the r ear lid and remove the storage tray . 2. Pull up on the r elease handle located inside the floor console to disengage the floor console, reinstall the storage tray and close the rear lid. 3. Using the fr ont and rear grab handles, slide the console rearwar d to disengage the front o[...]

T o reinstall the console, r emove the rubber mat and relocate to the alternate floor tray , slide the console forward to engage the fr ont of the console into the floor tray . Rapidly push down on the rear of the console with enough force to engage the latch, you should hear the latch “ snap ” into place. Pull up on the console to be sure it i[...]

2. Plug in the power cor d for the cellular phone into the outlet located in the bottom of the forward console bin and reinstall the cell phone holder . 3. Place the cell phone into the holder . CAUTION! • Many accessories that can be plugged in draw power from the vehicle ’ s battery , even when not in use (i.e. cellular phones, etc.). Eventua[...]

Rear Compartment Storage Bins Y our vehicle may be equipped with open storage bins located in each rear trim panel or your vehicle may be equipped with storage bins located under the armrest in each rear trim panel. Cargo/T ub Nets T wo cargo/tub nets ar e available on vehicles equipped with Fold-in-Floor Seating. The cargo nets fit in the second r[...]

ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails ar e designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 68 kg (150 lbs), and should be uniformly distributed over the luggage rack crossbars. Distribute cargo weight evenly on the r oof rack crossbars. The roof rack does not incr ease the tota[...]

T o move the cross bars, loosen the thumb scr ews located at the upper edge of each cross bar appr oximately six turns, then move the cross bar to the desir ed position. Once the cross bar is in place, r etighten the thumb screws to lock the cross bar into position. Attempt to move the crossbar again to ensur e that it has properly locked into posi[...]

W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack. LOAD LEVELING SYSTEM The automatic load leveling system will provide a level riding ve[...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instruments And Contr ols ................. 1 9 5 䡵 Base Instrument Cluster .................. 1 9 6 䡵 Instrument Cluster W ith T ach .............. 1 9 7 䡵 Premium Instr ument Cluster ............... 1 9 8 䡵 Instrument Cluster Descriptions ............ 1 9 9 䡵 Electronic Digital Clock ..[...]

▫ T uning ............................. 2 1 0 ▫ Radio Data System (RDS) ............... 2 1 0 ▫ PTY (Program T ype) Button .............. 2 1 0 ▫ Balance ............................ 2 1 2 ▫ Fade .............................. 2 1 2 ▫ T one Control ........................ 2 1 2 ▫ AM/FM Selection ..................... 2 1 2 ▫ Scan B[...]

▫ Mode .............................. 2 1 7 ▫ T ape CD Button ...................... 2 1 7 ▫ T ime Button ......................... 2 1 8 ▫ Scan Button ......................... 2 1 8 ▫ CD Changer Control Capability — If Equipped ......................... 2 1 8 䡵 Sales Code RBP — AM & FM Stereo Radio W ith Cassette T ape Player [...]

䡵 6 Disc CD Changer — If Equipped .......... 2 4 4 ▫ Loading The CD Changer ............... 2 4 4 ▫ Playing Discs ........................ 2 4 5 ▫ Seek Button ......................... 2 4 5 ▫ FF/T une/R W ........................ 2 4 5 ▫ Mode Button ........................ 2 4 5 ▫ Program Button 1 ..................... 2 4 5 ▫ P[...]

䡵 Satellite Radio — If Equipped .............. 2 5 8 ▫ System Activation ..................... 2 5 8 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .................... 2 5 9 ▫ Selecting Satellite Mode In RBB, RAH And RBK Radios ......................... 2 5 9 ▫ Selecting Satellite Mode In RBP , RBU, RAZ, RB1 And RBQ [...]

▫ Manual Air Conditioning Operation ........ 2 7 1 ▫ Manual Rear Zone Climate Control — If Equipped ......................... 2 7 4 ▫ Infrared Three-Zone Automatic T emperature Control — If Equipped ................. 2 7 6 䡵 Rear W indow Features ................... 2 8 8 ▫ Intermittent Rear W iper Operation — Manual T emperature Co[...]

INSTRUMENTS AND CONTROLS UNDERST ANDING YOUR INSTRUMENT P ANEL 195 4[...]

BASE INSTRUMENT CLUSTER 196 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER WITH T ACH UNDERST ANDING YOUR INSTRUMENT P ANEL 197 4[...]

PREMIUM INSTRUMENT CLUSTER 198 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T ire Pressur e Monitor W arning Light — If Equipped This light will turn on when there is a Low tir e pressur e condition. The light will remain on until the tire pr essure is pr operly set. The li[...]

3. Low Fuel Light When the fuel level reaches appr oximately 3.0 gallons (1 1.0 liters) this light will turn on and remain on until fuel is added. 4. T urn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. If the vehicle electronics sense that the vehicle has traveled about one mile with th[...]

The light will remain on until the cause is corr ected. NOTE: The light may flash momentarily during sharp cornering maneuvers which change fluid level condi- tions. The vehicle should have service performed. If brake failure is indicated, immediate r epair is neces- sary . W ARNING! Driving a vehicle with the brake light on is danger- ous. Part of[...]

9. Airbag Light This light turns on and remains on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON. If the light is not on during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible. 10. Anti-Lock Light This light monitors the Anti-Lock Brake Sys- tem. T[...]

13. Seat Belt Reminder Light When the ignition switch is first turned ON, this light will turn on for 5 to 8 seconds as a bulb check. During the bulb check, if the driver ’ s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver seat belt remains unbuckled, the Seat Belt W arning Light will flash or remai[...]

CAUTION! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads (H), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “ H ” , and you hear continuous chimes, turn the engine off immediatel[...]

NOTE: Y ou must apply the brakes before shifting fr om Park. 19. Oil Pr essure W arning Light This light shows low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for 4 minutes when this light [...]

22. T rac Of f Indicator — If Equipped This display indicator should illuminate for approxi- mately four seconds as a bulb check when the ignition switch is first turned ON. The “ TRAC OFF ” Indicator will flash if the traction control is in use. The “ TRAC OFF ” Indicator will illuminate if: • The T raction Control switch has been used[...]

The trip odometer shows individual trip mileage. T o switch from odometer to trip odometer , press the T rip Odometer button. 24. Cruise Indicator This display indicator shows that the Speed Control System is ON. 25. T rip Odometer Button Press this button to change the display fr om odometer to trip odometer . The word TRIP will appear when in the[...]

RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent r eception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. T o help you understand and sa[...]

remain active for up to 45 seconds after the ignition switch has been turned off. Opening a vehicle fr ont door will cancel this feature. SALES CODE RAZ — AM/ FM STEREO RADIO WITH CASSETTE T APE PLA YER, CD PLA YER AND CD CHANGER CONTROLS Operating Instructions — Radio NOTE: Power to operate the radio is controlled by the ignition switch. It mu[...]

T uning Press the TUNE contr ol up or down to increase or decrease the fr equency . If you press and hold the button, the radio will continue to tune until you release the button. The frequency will be displayed and continu- ously updated while the button is pressed. Radio Data System (RDS) The Radio Data System allows radio broadcasting sta- tions[...]

T oggle the PTY button to select the following format types: Program T ype Radio Display Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Information Inform Jazz Jazz Foreign Language Language News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Program [...]

no station is found with the selected PTY pr ogram type, the radio will return to the last pr eset station. If a preset button is activated while in the PTY (Pr ogram T ype) mode, the PTY mode will be exited and the radio will tune to the preset station. Pressing PTY , then SCAN will scan the FM Band and stop at all RDS stations. Each RDS station w[...]

Scan Button Pressing the SCAN button causes the tuner to sear ch for the next station, in either AM or FM, pausing for 5 seconds at each listenable station before continuing to the next. Pressing the AM/FM button continues the search in the alternate frequency band. T o stop the search, pr ess SCAN a second time. T o Set The Radio Push-button Memor[...]

be experienced due to a defective cassette tape. Clean and demagnetize the tape heads at least twice a year . Seek Button Press the SEEK button up for the next selection on the tape and down to return to the beginning of the curr ent selection. Press the SEEK button up or down to move the track number to skip forward or backwar d 1 to 6 selections.[...]

Metal T ape Selection If a standard metal tape is inserted into the player , the player will automatically select the correct equalization and the 70 symbol will appear in the display window . Pinch Roller Release If ignition power or the radio ON/OFF switch are turned off, the pinch r oller will automatically retract to pr otect the tape from any [...]

Inserting The Compact Disc The CD player contained within the radio is not a multi-disc changer , and will only accept one CD. Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player . If the volume control is ON, the unit will switch fr om radio to CD mode and begin to play . The [...]

FF/TUNE/RW Press FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W ( Reverse) button works in a similar manner . Program Button 4 (Random Play) Press this button while the CD is playing to activate Random Play . This feature plays the tracks on the se- lected disc in random order to pr ovide an interesti[...]

Time Button Press this button to change the display fr om elapsed CD playing time to time of day . Scan Button Press this button to play the first 10 seconds of each track. T o stop the scan function, press the button a second time. CD Changer Control Capability — If Equipped This radio is compatible with a remote mounted CD changer available thr[...]

CD Diagnostic Indicators When driving over a very rough r oad, the CD player may skip momentarily . Skipping will not damage the disc or the player , and play will resume automatically . As a safeguard and to pr otect your CD player , one of the following warning symbols may appear on your display . A CD HOT symbol indicates the player is too hot. [...]

Radio Operation Power/V olume Control Press the ON/VOL control to turn the radio on. T urn the volume control to the right to incr ease the volume. NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio. PTY (Program T ype) Button Pressing this button once will turn on the[...]

Program T ype Radio Display Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in th[...]

Scan Press and r elease the SCAN button to search for the next station in either the AM or FM mode. The radio will pause for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess the SCAN button a second time. T une Press the TUNE contr ol up or down to increase or decrease the fr equency . If you press and[...]

SET 1 will now show in the display window . Select the “ 1 – 5 ” button you wish to lock onto this station and press and release that button. If a button is not selected within 5 seconds after pressing the SET button, the station will continue to play but will not be locked into push-button memory . Y ou may add a second station to each push-[...]

T ape Player Operation Insert the cassette with the exposed tape side toward the right and the mechanical action of the player will gently pull the cassette into the play position. NOTE: When subjected to extremely cold temperatur es, the tape mechanism may requir e a few minutes to warm up for proper operation. Sometimes poor playback may be exper[...]

Rewind — RW Press the R W button down momentarily to reverse the tape direction. The tape will r ewind until the button is pressed again or until the beginning of the tape is reached. At the beginning of the tape, the tape will play in the opposite direction. EJT T ape Press the EJT T APE button and the cassette will disen- gage and eject from th[...]

CD Player Operation NOTE: The ignition switch must be in the ON or ACC position and the volume control ON befor e the CD player will operate. Inserting The Compact Disc Y ou may either insert or eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio off, the display will show CD and the time of day will be display[...]

FF/TUNE/R W Press FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W (Reverse) button works in a similar manner . Random Play — RND/Program Button 4 Press the RND (button 4) button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to [...]

Disc Up/Program Button 1 Press the DISC (button 1) button to play the next avail- able disc. Random Play — RND/Program Button 4 Press the RND (button 4) button while the CD is playing to activate Random Play . This feature plays the selections on the currently playing compact disc in random or der to provide an inter esting change of pace. Press [...]

SALES CODE RBQ — AM/FM STEREO RADIO WITH 6 - DISC CD CHANGER Radio Operation Power/V olume Control Press the PWR/VOL control to turn the radio on. T urn the volume control clockwise to incr ease the volume. NOTE: Power to operate the radio is controlled by the ignition switch. It must be in the ON or ACC position to operate the radio. Mode Press [...]

channel number will then be displayed for five seconds. The current channel name and number will then be displayed until an action occurs. CD ’ s may remain in the player while in the Satellite Radio mode. Seek Press and r elease the SEEK button to search for the next station in either the AM or FM mode. Press the top of the button to seek up and[...]

Audio The audio button controls the BASS, TREBLE, BAL- ANCE, and F ADE. Press the AUDIO button and BASS will be displayed. Press the SEEK + or SEEK – to incr ease or decrease the Bass tones. Press the AUDIO button a second time and TREB will be displayed. Press the SEEK + or SEEK – to incr ease or decrease the T r eble tones. Press the AUDIO bu[...]

CD Player Operation NOTE: The ignition switch must be in the ON or ACC position and the Power / V olume control pushed ON before the CD player will operate. Inserting The Compact Disc CAUTION! This CD player will accept 4 3 ⁄ 4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may either insert or eje[...]

Radio display will show “ ejecting ” when it is being ejected. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If the CD is not r emoved, the radio will continue to play the non-removed CD. If the CD is removed and ther e are other CD ’ s in the radio, the radio will play the next CD. If the CD is re[...]

PTY (Program T ype) Button Pressing this button once will turn on the PTY mode for 5 seconds. If no action is taken during the 5 second time out the PTY icon will turn of f. Pressing the PTY button repeatedly within 5 seconds will allow the pr ogram format type to be selected. Many radio stations do not currently broadcast PTY information. T oggle [...]

Program T ype Radio Display T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM mode. The radio display will flash “ SEEK ” and the selected PTY program type w[...]

A CD HOT symbol indicates the player is too hot. CD HOT will pause the operation. Play can be resumed when the operating temperature is corr ected or another MODE is selected. CD ERROR will appear on the display if the laser is unable to read the Disc data for the following r easons: • W arped disc • Excessive vibration • Disc inserted upside[...]

Radio Operation Power/V olume Control Press the ON/VOL control to turn the radio on. T urn the volume control clockwise to incr ease the volume. NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio. Seek Press and r elease the SEEK button to search for the next station i[...]

stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a pr eset button is used a corresponding button number will be displayed. Audio The audio button controls the BASS, TREBLE, BAL- ANCE, and F ADE. Press the AUDIO button and BASS will be displayed. Press the SEEK + or SEEK – to incr ease or decrease the B[...]

1. This device may not cause harmful interfer ence, 2. This device must accept any interfer ence received, including interference that may cause undesir ed opera- tion. NOTE: Changes or modifications not expressively ap- proved by the party r esponsible for compliance could void the user ’ s authority to operate the equipment. CD Player Operation[...]

Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first second of the current selection. EJT — Eject Press the EJT button and the disc will unload and move to the [...]

Satellite Radio (if equipped). When Satellite Radio (if equipped) is selected “ SA T ” will appear in your radio display . A CD or tape may remain in the player while in the Satellite mode. T ime Press the TIME button to change the display fr om elapsed CD playing time to time of day . CD Changer Control Capability — If Equipped This radio is[...]

Random Play (RND) Press the Random button to play the tracks on the selected disc in random order for an inter esting change of pace. Random can be cancelled by pressing the button a second time or by ejecting the CD from the changer . Operating Instructions - Satellite Radio Mode (If Equipped) Refer to the Satellite Radio section of the Owner ’ [...]

SALES CODE RB1 — AM/FM STEREO RADIO WITH DVD/GPS NA VIGA TION SYSTEM The navigation system provides maps, turn identifica- tion, selection menus and instructions for selecting a variety of destinations and routes. Refer to your “ Navi- gation User ’ s Manual ” for detailed operating instruc- tions. NOTE: If your vehicle is not equipped with[...]

6 DISC CD CHANGER — IF EQUIPPED The CD changer is located below the radio in the instrument panel. The changer plays only 4 3 ⁄ 4 inch (12 cm) discs. The changer holds up to 6 discs. Each disc is loaded and ejected through a single slot in fr ont of the changer . Each disc has a numbered button with an amber light above it which, when illuminat[...]

Playing Discs The radio will show the CD number , the CD track number , and the T rack T ime Elapsed while the radio is in the CD mode. If more than one CD is loaded in the changer , the changer will automatically play the next disc after playing the last track of the current disc. Seek Button Press the top of this button on the radio once to play [...]

Program Button 5 Press this button to play the pr evious disc. Time Button Press this button to switch between time of day and CD track time. Changing Modes While in the radio mode, if a cassette is loaded, press the Mode button to switch to the tape mode. If a CD is loaded, press the Mode button to select the CD mode. If neither a tape nor CD is l[...]

as selecting discs loaded in the 6 disc CD/DVD changer while listening to the Rear Audio/V ideo System. The Rear Seat Audio/V ideo System may be available in a base and premium version. The pr emium version in- cludes a six disc changer , remote contr ol and two sets of wireless headphones. The base version includes a single disc changer and remote[...]

T o insert disc(s) into the changer , follow the instructions shown: 1. On vehicles equipped with the pr emium version, select and press any number ed button without an illumi- nated light above it. 2. Gently insert the disc with the label facing up while the light below the loading slot is illuminated. On vehicles equipped with the premium version[...]

• If you insert a disc with the ignition ON and the radio OFF , the DVD will automatically be pulled into the DVD changer and the display will show the time of day . • It is recommended to label home made burned discs with a permanent marker instead of adhesive labels. These types of labels may become loose and cause the disc to be stuck in the[...]

Operating Instructions — Remote Control NOTE: Aim the remote contr ol at the DVD changer located on the center of the instrument panel and pr ess the desired button. Dir ect sunlight or objects blocking the line of sight may affect the function of the r emote control. Remote Control 250 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

Remote Control Buttons 1. Headphone T ransmitter 2. Menu Up/Next T rack/Chapter 3. Menu Left/Fast Rewind 4. Return 5. Setup 6. Pause/Play 7. Mute 8. Display 9. Mode 10. Program Down - Pr evious Disc 1 1. Program Up - Next Disc 12. Slow 13. Stop 14. Menu 15. Menu Down/Previous T rack/Chapter 16. Menu Right/Fast Forward Remote Control Buttons 17. Ent[...]

R TN Button (4) This button only functions in DVD video mode. Press this button to return to the pr evious menu when in the DVD disc menu mode. SETUP Button (5) This button only functions in DVD video mode. Press the button after pressing the ST OP button to access the DVD changer set up menu. Use the right and left arrows to move between tabs for [...]

SLOW Button (12) This button only functions in DVD video mode. Press this button to advance the video. If the DVD is paused, pressing this button will advance the video frame by frame. STOP Button (13) This button only functions in DVD video mode. Press this button to stop the DVD. MENU Button (14) This button only functions in DVD video mode. Pres[...]

Remote Control Battery Service • T o replace the batteries for the r emote control slide the cover rearwar d. The replacement batteries for the r emote control ar e two AAA batteries. Operating Instructions — Video Screen Push up on the release button to lower the video scr een. Lowering V ideo Screen 254 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

1. Screen W idth Button Changes the width of the screen pictur e. 2. Enter Button This button will enter the selection from the on-screen menu. 3. Brightness Button Changes the brightness of the screen pictur e. V ideo Screen Controls UNDERST ANDING YOUR INSTRUMENT P ANEL 255 4[...]

Operating Instructions — Headphones 1. Power Button 2. V olume Control 3. Power Indicator Power Button Pressing the power button will turn the headphones ON/OFF . An indicator light will illuminate on the head- phone earpiece to indicate the headphones are ON. NOTE: • The headphones will turn off automatically in ap- proximately 3 minutes if th[...]

• Replace the battery in each earpiece and reinstall the cover . The headphones requir e two AAA batteries. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept [...]

Operating Instructions — MP3 Player , Portable W alkman An MP3 player can be connected to the audio system. Connect the cables to the RCA jacks located on the fr ont of the CD/DVD changer . NOTE: Follow the manufactures instr uctions for the correct colors when connecting the RCA cables. Operating Instructions — Video Games/Camcorders A video g[...]

2. Cr edit card information. 3. Y our V ehicle Identification Number . Electronic Serial Number/Sirius Identification Number (ENS/SID) The Electronic Serial Number/Sirius Identification Num- ber is needed to activate your Sirius Satellite Radio system. T o access the ESN/SID, refer to the following steps: ESN/SID Access W ith RBB, RAH and RBK Radio[...]

Selecting Satellite Mode in RBP , RBU, RAZ, RB1 and RBQ Radios Press the MODE button r epeatedly until the word ⬙ SIRIUS ⬙ appears in the display . These radios will also display the following: • After 3 seconds, the current channel name and channel number will be displayed for 5 seconds. • The current pr ogram type and channel number will [...]

Storing and Selecting Pre-Set Channels In addition to the 10 AM and 10 FM pre-set stations, you may also commit 10 satellite stations to push button memory . These satellite channel pre-set stations will not erase any AM or FM pre-set memory stations. Follow the memory pre-set pr ocedures that apply to your radio. Using the PTY (Program T ype) Butt[...]

Reception Quality Satellite reception may be interr upted due to one of the following reasons. • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent [...]

The right hand rocker switch has a push button in the center and controls the volume and mode of the sound system. Pressing the top of the r ocker switch will increase the volume and pressing the bottom of the r ocker switch will decrease the volume. Pr essing the center button changes the operation of the radio from AM to FM to T ape or CD mode de[...]

CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track or to the beginning of the previous track if it is within one second after the current track begins to play . If you press the switch up or down twice it plays the second track, thre[...]

turned all the way down. T o prevent this, you should periodically clean the head with a commercially available WET cleaning cassette. As preventive maintenance, clean the head about every 30 hours of use. If you wait until the head becomes very dirty (noticeably poor sound), it may not be possible to remove all deposits with a simple WET cleaning [...]

CLIMA TE CONTROLS The Air Conditioning and Heating System is designed to make you comfortable in all types of weather . Manual Air Conditioning and Heating System Front Blower Control The Front Blower Contr ol selects whether the Cli- mate Control System is ON or OFF . When the blower control is set to the O (OFF) position the fr ont blower will tu[...]

Dual Zone T emperature Control — If Equipped W ith the Dual Zone T emperature Contr ol System, each front seat occupant can independently contr ol the tem- perature of air coming fr om the outlets on their side of the vehicle. This is accomplished by having a separate temperature control lever for both the driver and fr ont seat passenger . The b[...]

Panel Mode Air comes from the outlets in the instr ument panel. Each of these outlets can be individually adjusted to direct the flow of air . Moving the air vane knob on the center outlets down, will close off the air flow fr om the center outlets. The thumbwheel next to the outboard outlets can be rotated to r egulate or shut off the air flow fr [...]

Bi-Level Mode Air comes from both the instr ument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. NOTE: In many temperature lever positions, the bi- level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets. Bi-Level Outlets[...]

Floor Mode Air comes from the floor outlets. A slight amount of air is directed thr ough the defrost and side window demister outlets. Mix Mode Air comes from the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keep- ing the windshield clear . Floor Outlets Mi[...]

Defrost Mode Air comes from the windshield and side window demist outlets. Use this setting when necessary to defrost your windshield and side windows. NOTE: For improved safety , the compressor is activated and the recir culation mode is deactivated when Mix or Defrost modes ar e selected. This is done to assist in drying the air and it will help [...]

• If your air conditioning performance seems lower than expected, check the A/C air filter and the front of the A/C condenser for an accumulation of dirt or insects. The A/C condenser is located in front of the radiator . The A/C air filter is located under the instrument panel on the passenger side. • Fabric type fascia protectors tend to bloc[...]

A/C Recirculation Programming The recir culation control is pr ogrammed to cancel the recir culation mode when the ignition key is turned OFF and will reset to outside air mode when the ignition key is turned ON. The frequent use of outside air will help keep odors from building up within the air conditioner - heater housing. It is recommended that[...]

Manual Rear Zone Climate Control — If Equipped The Manual Rear Zone Climate Control system has floor air outlets to the rear of the right side sliding door and overhead outlets at each outboar d rear seating position. The unit provides warm or cool air thr ough the floor and upper outlets. The rear blower and temperatur e controls for the r ear s[...]

Only when the primary control for the r ear blower is in the “ REAR ” position do the second seat occupants have control of the r ear blower speed. The rear blower contr ol, located in the headliner near the center of the vehicle has an OFF position and 3 blower speed positions. This allows the second seat occupants to control the volume of air[...]

in the cold position, cold air will be delivered fr om the headliner outlets. As the rear temperature knob is turned towards hot, the air will get warmer , and the air will be delivered fr om both the headliner and floor outlets. When the rear temperatur e knob reaches the full hot position, all of the air will be delivered fr om the floor outlets.[...]

Operation of the system is quite simple. Begin by press- ing the auto rocker switch to the “ HI ” or “ LO ” position, the word “ AUT O ” will illuminate in the front A TC display along with “ HI ” or “ LO ” . The system will then automatically regulate the amount of air flow . Next, dial in the temperature you would like the sys[...]

off and “ DELA Y ” will appear in the front A TC display until the engine warms up. Also, an estimate of the time remaining until the “ DELA Y ” is over will appear peri- odically in the display . However , the fan will engage immediately if the defrost mode is selected or by r otating the blower control to any fixed blower speed. This feat[...]

speeds are selected or either the ⬙ Auto HI ⬙ or ⬙ Auto LO ⬙ buttons are pr essed. This allows the front occupants to control the volume of air cir culated in the vehicle and cancel the “ AUTO ” mode. The operator can also select the direction of the air by rotating the right mode contr ol knob to one of the following positions. Panel M[...]

Bi-Level Mode Air comes from both the instr ument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. NOTE: In many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets. Bi-Level Outlets 280 UN[...]

Floor Mode Air comes from the floor outlets. A slight amount of air is directed thr ough the defrost and side window demister outlets. Mix Mode Air comes from the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keep- ing the windshield clear . Floor Outlets Mi[...]

Defrost Mode Air comes from the windshield and side window demist outlets. Use this setting when necessary to defrost your windshield and side windows. NOTE: While operating in either ⬙ Auto HI ⬙ or ⬙ Auto LO ⬙ , the system will not automatically sense the presence of fog, mist, or ice on the windshield. ⬙ Defrost ⬙ mode must be manuall[...]

the recir culation button. The recir culation mode should only be used temporarily . The recirculation symbol will illuminate in the display when this button is selected. Push the button a second time to turn off the r ecirculation icon in the display and allow outside air into the vehicle. NOTE: In cold weather , use of the Recirculation mode may [...]

The Rear Automatic T emperature Contr ol System is located in the headliner near the center of the vehicle. Operation of the rear system is quite simple. Begin by rotating the r ear system center control knob on the fr ont A TC control unit to the “ REAR CONTROL ” position, this illuminates an “ UNLOCK ” symbol in the rear display . Next, r[...]

Rear Blower Control The rear blower contr ol, located in the headliner near the center of the vehicle has an “ OFF ” , “ AUTO ” and a range of blower speeds. The rear blower contr ol knob can be manually set to “ OFF ” or any fixed blower speed by rotating the knob from low to high. This allows the r ear seat occupants to control the vo[...]

Rear Mode Control The Rear Mode Control, located in the headliner near the center of the vehicle can be used to select between Auto, Headliner , Bi- Level and Floor modes. Auto Mode The rear system automatically maintains the corr ect mode and comfort level desired by the r ear seat occu- pants. Floor Mode Air comes from the floor outlets. Bi-Level[...]

glycol antifreeze coolant in water is r ecommended. Refer to section 7, Maintenance Procedur es, of this manual for proper coolant selection. W inter Operation T o insure the best possible heater and defr oster perfor- mance, make sure the engine cooling system is function- ing properly and the pr oper amount, type, and concen- tration of coolant i[...]

Operating T ips A/C Air Filter — If Equipped The climate control system filters out dust, pollen and some odors from the air . Strong odors can not be totally filtered out. Refer to MAINT AINING YOUR VEHICLE, “ Air Conditioner Maintenance ” for filter replacement instructions. REAR WINDOW FEA TURES Intermittent Rear Wiper Operation — Manual[...]

Rear W asher Operation — Manual T emperature Control Only The controls ar e located on the Manual T empera- ture Contr ol head above the front blower contr ol. Press and hold the button for as long as spray is desired. If the button is depr essed and held while the Intermittent wiper is on, the wiper will operated for a few seconds after the butt[...]

Intermittent Rear Wiper Operation — Automatic T emperature Control Only When this button is pressed and the ignition switch is in the ON position, the rear wiper will operate at a fixed interval of about 8 seconds. As vehicle speed increases, the time delay will shorten. The switch position as well as an indicator light will show when the wiper i[...]

The washer fluid reservoir will hold a full gallon of fluid when the Low W asher Fluid Light illuminates. Electric Rear Window Defroster — If Equipped Press this button to turn on the r ear window defroster and the optional heated mirr ors. A light will show that the defroster is on. The defr oster automati- cally turns off after about 10 minutes[...]

CAUTION! T o avoid damaging the electrical conductors of the rear window defroster , do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window . Labels can be peeled off after soaking with warm water . 292 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 2 9 6 ▫ Normal Starting ...................... 2 9 6 ▫ Extremely Cold W eather (Below ⫺ 29 ° CO r ⫺ 20 ° F ) ............... 2 9 6 ▫ If Engine Fails T o Start ................. 2 9 7 ▫ After Starting ........................ 2 9 8 䡵 Engine Block Heater [...]

▫ T ire Markings ........................ 3 1 0 ▫ T ire Identification Number (TIN) .......... 3 1 3 ▫ T ire Loading And T ire Pressur e ........... 3 1 4 䡵 Ti r e s — General Information ................ 3 1 8 ▫ T ire Pressur e ......................... 3 1 8 ▫ T ire Inflation Pressur es ................. 3 1 9 ▫ Radial-Ply T ires [...]

▫ Fuel System Cautions .................. 3 3 4 ▫ Carbon Monoxide W arnings .............. 3 3 5 䡵 Adding Fuel .......................... 3 3 6 ▫ Fuel Filler Cap (Gas Cap) ............... 3 3 6 䡵 V ehicle Loading ........................ 3 3 8 ▫ V ehicle Certification Label ............... 3 3 8 ▫ Gross V ehicle W eight Rating (GVWR) [...]

ST ARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. W ARNING! Do not leave animals or children inside parked vehicles in hot weather; interior heat build up may cause seri[...]

W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- mission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used [...]

CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released. If this occurs, continue cranking up to 15 seconds with the accelerator peda[...]

ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cor d. The engine block heater cord is r outed under the hood on the driver side of the vehicle. It has a removable c[...]

W ARNING! It is dangerous to shift the selector lever out of “ P ” or “ N ” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is i[...]

Reset Mode - Electronic T ransmission The transmission is monitored electr onically for abnor- mal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into sec- ond gear . The transmission remains in second gear despite the forward gear selected. Park (P), Reverse (R), and Neutral (N) will continue [...]

Apply parking brake when leaving vehicle in this range. • “ R ” Reverse Shift into this range only after the vehicle has come to a complete stop. • “ N ” Neutral Engine may be started in this range. • “ D ” Overdrive For most city and highway driving, it provides smoothest upshifts and downshifts and best fuel economy . When frequ[...]

NOTE: The vehicle computer will over ride Overdrive and “ 3 ” Drive ranges by changing shift points if the transmission operating temperature exceeds acceptable limits. This is done to prevent transmission damage due to overheating. P ARKING BRAKE When the parking brake is applied with the ignition switch on, the brake light in the instrument c[...]

added precaution, turn the fr ont wheels toward the curb on a downhill grade and away from the curb on a uphill grade. The parking brake should always be applied when the driver is not in the vehicle. W ARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could be injured. Children should be war[...]

by increased pedal travel during application, gr eater pedal force r equired to slow or stop, and potential activation of the Brake W arning Lamp. Anti-Lock Brake System — If Equipped The Anti-Lock Brake System pr ovides increased vehicle stability and brake performance under most braking conditions. The system automatically “ pumps ” the bra[...]

When the vehicle is driven over approximately 15 mph (25 km/h), you may also hear a slight clicking sound as well as some related motor noises. These noises ar e the system performing its self check cycle to ensure that the ABS system is working properly . This self check occurs each time the vehicle is started and accelerated past approximately 15[...]

W ARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive speed in tur[...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolong operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and should be avoided when possible. Damage to the po[...]

• There is a T raction Contr ol System malfunction • The system has been deactivated to prevent damage to the brake system due to overheated brake tempera- tures NOTE: The T raction Control will make buzzing or clicking sounds when in operation. NOTE: Extended heavy use of T raction Control may cause the system to deactivate and turn on the TRA[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P(Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tir es have the letter “ P ” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d ha[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Milimeters (mm) 65 = A[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry . H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. — The maximum speed corresponding to the Speed Symbol should only b[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the T[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e for pas- senger cars is listed on either the face of the driver ’ s door or the driver ’ s side “ B ” pillar . For vehicles other than passenger cars, the cold tire inflation pr essures ar e listed on either the “ B ” pillar , the Cert[...]

T ire and Loading Information Placard This placard tells you important information about the, 1) number of people that can be carried in the vehicle 2) the total weight your vehicle can carry 3) the tire size designed for your vehicle 4) the cold tire inflation pr essures for the fr ont, rear and spare tir es. Loading The vehicle maximum load on th[...]

combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) should never exceed the weight refer enced here. Steps for Determining Correct Load Limit 1. Locate the statement “ The combined weight of occu- pants and cargo should never exceed XXX pounds ” on your vehicle ’ s placard. 2. Determine the combined weight of[...]

ST ARTING AND OPERA TING 317 5[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

2. Economy — Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Underinflation also increases tir e rolling r esistance and results in higher fuel consumption. 3. Ride Comfort and V ehicle Stability [...]

check tire pr essure. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e underinflated. CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap – if equipped. This will prevent moisture and dirt from entering the valve stem, which co[...]

T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important. Increased tir e pressur e and reduced vehicle loading may be requir ed for [...]

Radial-Ply Tires W ARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly . The instability could cause an accident. Al- ways use radial ply tires in sets of four (or 6, in case of trucks with dual rear wheels). Never combine them with other types of tires. Cuts and punctures in radial [...]

Do not install a wheel cover or attempt to mount a conventional tire on the compact spar e wheel, since the wheel is designed specifically for the compact spare. Do not install more than one compact spar e tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car[...]

W ARNING! The limited use spare tires are for emergency use only . Installation of this limited use spare tire affects vehicle handling. W ith this tire, do not drive more than 60 mph (100 km/h). Keep inflated to the cold tire inflation pressure listed on either your tire placard or limited use spare tire and wheel assembly . Replace (or repair) th[...]

These indicators are molded into the bottom of the tr ead grooves and will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the indicators appear in 2 or more adjacent gr ooves, the tire should be r eplaced. Many states have laws requiring tir e replacement at this point. Replacement Tires The tires on your new vehicle pr ovide [...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspen- sion dimensions and performance characteristics, resulting in changes to steering, handling, and brak- ing of your vehicle. This can cause unpredictable handling and stress to steering[...]

Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . TIRE PRESSURE MONITOR SYSTEM — IF EQUIPPED The T ire Pressur e Monitor System (TPM) system uses wireless technology with wheel rim mounted electr onic s[...]

CHECK TPM SYSTEM The T ire Pressur e Monitor System (TPM) system requires service. See your authorized dealer for service. CAUTION! The TPM system has been optimized for the original equipment tires and wheels. TPM system pressures have been established for the tire size equipped on your vehicle. Undesirable operation or sensor dam- age may result [...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. The tire pr essure sensors [...]

TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “ Class S ” specifications. Chains must be the proper size for the vehicle, as r ecommended by the chain manufacturer . NOTE: Do not use tire chains on a compact spar e tire. CAUTION! T o avoid damage to your vehicle or tires, observe the following precautions: • B[...]

NOTE: In order to avoid damage to tir es, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufactur er ’ s instructions on method of installation, operating speed, and conditions for usage. Always use the lower suggested operating speed if both the chain manufacturer and vehicle manufa[...]

Section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being per- formed. The suggested rotation method is the “ forwar d-cross ” shown in the following diagram. FUEL REQUIREMENTS Y our vehicle is designed to meet all emis- sion regulations a[...]

Over 40 automobile manufacturers ar ound the world have issued and endorsed consistent gasoline specifica- tions (the W orld W ide Fuel Charter , WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer r ecommends the use of gasolines that meet the WWFC specifica[...]

MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber . Gasolines blended with MMT offer no performance advantage beyond gasolines of the same octane number without MMT . Gasolines blended with MMT have shown to reduce spark plug life and r educe emission system performanc[...]

• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may requir e immediate service. Contact your dealer for service assistance. • The use of fuel additives which are now bei[...]

• Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repaired, drive with all side windows fully open. • Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust ga[...]

CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system. NOTE: The driver ’ s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed[...]

W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground whi[...]

• V ehicle Identification Number (VIN) • T ype of V ehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the V ehicle Identification Number (VIN). Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load m[...]

Figure out the weight on the fr ont and rear of the vehicle separately . It is important that you distribute the load evenly over the front and r ear axles. Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle ’ s GVWR. Loading T o load your [...]

Example Only Front Axle Rear Axle Empty W eight 2140 lbs 1470 lbs Load (Including driver , pass- sengers and cargo) 360 lbs 980 lbs T otal 2500 lbs 2450 lbs GA WR 2544 lbs 2544 lbs TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer[...]

T owing Requirements • The maximum frontal ar ea of the trailer cannot exceed 40 square feet (3.72 squar e meters). • The trailer tongue load must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight refer enced on the T ire and Loading Information placard. Refer to the T ire – Safety Informa[...]

TRA VEL CONDITION MAXIMUM TRAILER WEIGHT (TRAILER FRONT AL AREA NOT TO EXCEED 40 SQ. FT .) 3.3L,& 3.8L ENGINES 3.3L & 3.8L ENGINES WITH HEA VY DUTY TRAILER TOW P ACKAGE MAX. COMBINED WEIGHT OF VEHICLE AND TRAILER NOT TO EXCEED 6,600 lbs (2993 kg) MAX. COMBINED WEIGHT OF VEHICLE AND TRAILER NOT TO EXCEED 8,600 lbs (3900 kg) UP TO 2 PERSONS &[...]

CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances. W ARNING! Connecting trailer brakes to your vehicle ’ s hydraulic brake lines can ove[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher .................. 3 4 6 䡵 If Y our Engine Overheats ................. 3 4 7 䡵 Jacking And T ire Changing ................ 3 4 8 ▫ Jacking Instructions — Fold-In-Floor Seating . . 349 ▫ Jacking Instructions — Non Fold-In-Floor Seating ............................. 3 6 1 ?[...]

HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel above the radio. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emer- gency . Pus[...]

IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appr opriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in neutral, but do not increase engine idle speed. NOTE: There ar e steps that you can take to slow down an impendi[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. JACKIN[...]

Jacking Instructions — Fold-in-Floor Seating Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in P ARK. T urn OFF the ignition. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road[...]

Jack Location — Fold-in-Floor Seating The jack, jack handle and winch handle tools are stowed behind the rear left side trim panel in the r ear cargo ar ea. Pull up on the lever to release the cover . Remove the scissors jack and jack handle by rotating the small wing nut to the left. Also remove the tool pouch containing the spare tir e winch ha[...]

Spare T ire Stowage — Fold-in-Floor Seating For vehicles equipped with fold-in-floor seating, the spare tir e is stowed inside a protective cover located under the center of the vehicle by means of a cable winch mechanism. The “ spare tir e drive ” nut is located on the floor , under a plastic cap between the front seats. The tool pouch conta[...]

Jacking Instructions — Fold-in-Floor Seating 1. Loosen (but do not r emove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. T o remove the compact spar e tire/cover assembly , assemble the winch handle extensions to form a “ T ’ and fit the winch “ T ” handle over the drive nut. Rotate th[...]

CAUTION! The winch mechanism is designed for use with the winch “ T ” handle only . Use of an air wrench or other power tools is not recommended and can damage the winch. 3. Assemble the winch handle extensions to form the Spare T ire Hook and pull the compact spar e tire/cover assembly from under the vehicle. W ARNING! Getting under a jacked-u[...]

NOTE: If either front tir e is flat, it may be necessary to jack up the vehicle to remove the compact spar e tire/ cover assembly from under the vehicle. Refer to jack engagement locations in the following steps for proper jack placement. 4. When the compact spar e tire/cover assembly is clear of the vehicle, stand the tire/cover assembly upright a[...]

Jack Engagement Locations WHA T TO DO IN EMERGENCIES 355 6[...]

6. These locations ar e on the sill flange of the body and consist of a pair of downstanding tabs. The jack is to be located, engaging the flange, between the pair of tabs closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location. Do not raise the v[...]

10. Lower the vehicle by turning the jack scr ew to the left. 1 1. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N · m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a tor[...]

14. Stow the cable and wheel spacer befor e driving the vehicle, reassemble the winch handle extensions to form a “ T ’ and fit the winch “ T ” handle over the drive nut. Rotate the nut to the right approximately 33 turns until the winch mechanism clicks at least three times. 15. Stow the jack, jack handle and winch handle tools. W ARNING! [...]

W ARNING! A loose compact spare tire/cover assembly , thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the com- pact spare tire with the cover assembly in the place provided. CAUTION! The winch mechanism is designed for use with the winch “ T ” handle only . Use of an air wrench or other power [...]

3. T urn the compact spare tir e so that the valve stem is down and place the tire into the spar e tire cover assem- bly . Slide the wheel spacer through the center of the wheel and spare tir e cover assembly so that the two retainer tabs snap out and engage the spar e tire cover on the opposite side. CAUTION! The compact spare tire cover assembly [...]

CAUTION! For vehicles equipped with fold-in-floor seating, the W inch Mechanism is designed specifically to stow a COMP ACT Spare T ire ONL Y . Do not attempt to use the W inch to stow the Full Size ’ Flat ’ T ire, or any other Full Size T ire. V ehicle damage may result. Jacking Instructions — Non Fold-in-Floor Seating Preparations For Jacki[...]

Jack Location — Non Fold-in-Floor Seating The jack, jack handle are stowed behind the r ear left side trim panel in the rear car go area. Pull up on the lever to release the cover . Remove the spare wheel, scissors jack and jack handle from stowage by r otating the wing nut to the left. Spare T ire Stowage — Non Fold-in-Floor Seating For vehicl[...]

Jacking Instructions — Non Fold-in-Floor Seating 1. Loosen (but do not r emove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. Fit the jack handle over the drive nut. Rotate the nut to the left until the spare is on the gr ound with enough slack cable to allow you to pull the tire out fr om unde[...]

Jack Engagement Locations 364 WHA T TO DO IN EMERGENCIES[...]

5. These locations ar e on the sill flange of the body and consist of a pair of downstanding tabs. The jack is to be located, engaging the flange, between the pair of tabs closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location. Do not raise the v[...]

NOTE: Do not install the wheel cover on the compact spare. Do not use a hammer or force to install the wheel covers. 9. Lower the vehicle by turning the jack scr ew to the left. 10. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate lug nuts until each nut has been tightened twice. Correct wh[...]

• For convenience in checking the spare tir e inflation, stow with the valve stem toward the r ear of the vehicle. • Using the jack handle, rotate the drive nut to the right until the wheel is drawn into place against the underside of the vehicle. • Continue to rotate the nut until you hear the mecha- nism click three times. It cannot be over[...]

W ARNING! • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmis- sion cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be u[...]

5. Connect the other cable, first to the negative terminal of the booster battery and then to the engine of the vehicle with the discharged battery . Make sure you have a good contact on the engine. 6. Start the engine in the vehicle which has the booster battery , let the engine idle a few minutes, then start the engine in the vehicle with the dis[...]

2. Slow down if r oad has standing water or puddles. 3. Replace tir es when tread wear indicators first become visible. 4. Keep tir es properly inflated. 5. Maintain suf ficient distance between your vehicle and the vehicle in front to avoid a collision in a sudden stop. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow , i[...]

TOWING A DISABLED VEHICLE With Ignition Key Y our vehicle may be towed under the following condi- tions: The gear selector must be in NEUTRAL, the distance to be traveled must not exceed 100 miles (160 km), and the towing speed must not exceed 44 mph (72 km/h). Exceeding these towing limits may cause a trans- mission geartrain failure. If the trans[...]

If it is necessary to use the accessories while being towed (wipers, defrosters, etc.), the key must be in the ON position, not the ACCESSORY position. Make certain the transmission remains in NEUTRAL. Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only ap- proved method of [...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 3.3L/3.8L Engines ...................... 3 7 6 䡵 Onboard Diagnostic System — O B D I I ........ 3 7 7 䡵 Emissions Inspection And Maintenance Programs ............................ 3 7 8 䡵 Replacement Parts ...................... 3 7 9 䡵 Dealer Service ......................... 3 7 9 䡵 Maintenance Pr[...]

▫ Steering Shaft Seal .................... 3 9 1 ▫ Steering Linkage ...................... 3 9 1 ▫ Drive Shaft Universal Joints .............. 3 9 1 ▫ Body Lubrication ..................... 3 9 2 ▫ W indshield W iper Blades ................ 3 9 2 ▫ W indshield And Rear W indow W ashers ..... 3 9 3 ▫ Exhaust System ....................[...]

▫ Rear T ail, Stop, T urn Signal, Side Marker And Back-Up Lights ....................... 4 2 0 ▫ Center High Mounted Stop Light (CHMSL) . . . 421 ▫ License Light ........................ 4 2 1 䡵 Fluids And Capacities ................... 4 2 2 䡵 Recommended Fluids, Lubricants And Genuine Parts ......................... 4 2 3 ▫ Engine ...[...]

3.3L/3.8L ENGINES Engine Compartment 3.3L/3.8L Engines 376 MAINT AINING YOUR VEHICLE[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle ’ s emissions control system. Failure to pass could pr event vehicle registration. For states which have an I/M (Inspection and Maintenance) requir ement, this check verifies the following: the MIL (Malfunction In[...]

ignition key or start the engine. This means that your vehicle ’ s OBD system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle ’ s OBD system is ready and you can proceed to the I/M [...]

NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take yo[...]

The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off or befor e starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level r eadings. Maintain the oil level between the MIN and MAX markings on the dipstick. Adding [...]

Change Engine Oil Road conditions and your kind of driving affects the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night temperatures ar e below 32 ° F( 0 ° C). • Stop and Go driving. • Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 mi[...]

American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only r ecommends API Certified engine oils. Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves[...]

Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil and oil filters can b[...]

Spark Plugs Spark plugs must fire pr operly to assure engine perfor - mance and emission control. New plugs should be in- stalled at the specified mileage. The entire set should be replaced if ther e is any malfunction due to a faulty spark plug, malfunctioning spark plugs can damage the cata- lytic converter . For proper type of r eplacement spark[...]

Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assur e proper catalyst operation and pr event possible catalyst damage. CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the [...]

vehicle allowed to cool. Thereafter , service, including a tune-up to manufacturer ’ s specifications, should be ob- tained immediately . T o minimize the possibility of catalyst damage: • Do not shut off the engine or interr upt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start engine by pushin[...]

W ARNING! Battery fluid is a corrosive acid solution and can burn or even blind you. Don ’ t allow battery fluid to contact your eyes, skin or clothing. Don ’ t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water . Battery gas is flammable and explosive. Keep fla[...]

Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a system performance check. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerant[...]

Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar - bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by dealers or other service facilities using recovery and r ecycling equ[...]

W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to insure accurate fluid level reading. Do not overfill. Use only manufacturers recommended power steering fluid. If necessary , add fluid to restore to the pr oper indicated level. W ith a clean cloth, wipe any spilled fluid f[...]

Continued operation could result in failur e of the univer- sal joint due to water and dirt contamination of the grease. This would r equire complete r eplacement of the joint assembly . Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, liftgate, sliding doors and hood hinges, should be lubricated periodi[...]

Windshield and Rear Window W ashers The fluid reservoir for the windshield washers and the rear window washer is shar ed. It is located in the engine compartment and should be checked for fluid level at regular intervals. Fill the r eservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush o[...]

vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for br oken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust syst[...]

Coolant Checks Check engine coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed and refilled with fr esh coolant. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty , clean [...]

CAUTION! • Mixing of coolants other than specified engine coolant, may result in engine damage, and de- crease corrosion protection. If a non-HOA T cool- ant is introduced into the cooling system in an emergency , it should be replaced with the speci- fied coolant as soon as possible. • Do not use plain water alone or alcohol base engine coolan[...]

Cooling System Pressure Cap The cap must be fully tightened to prevent loss of coolant, and to insure that coolant will r eturn to the radiator from the coolant r ecovery bottle. The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “ DO NOT OPEN HOT ” o[...]

do not store ethylene glycol based engine coolant in open containers or allow it to remain in puddles on the ground. If ingested by a child, contact a physician immediately . Clean up any ground spills immediately . Coolant Level The coolant recovery bottle pr ovides a quick visual method for determining that the coolant level is ad- equate. W ith [...]

• Check coolant freeze point in the radiator and in the coolant recovery bottle. If antifr eeze needs to be added, contents of coolant recovery bottle must also be protected against fr eezing. • If frequent coolant additions ar e requir ed, or if the level in the coolant recovery bottle does not dr op when the engine cools, the cooling system s[...]

Insure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secure and no leaks ar e present. Components should be replaced immediately if ther e is any evidence of wear or damage that could cause failure. Brakes In order to assur e brake system performance, all[...]

Insure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secure and no leaks ar e present. NOTE: Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant opera- tions to facilitate the assembly of hoses to couplings. Ther[...]

Overfilling of fluid is not recommended because it may cause leaking in the system. Add enough fluid to bring the level up to the requir e- ments described on the brake fluid reservoir . W ith disc brakes, fluid level can be expected to fall as the brake pads wear . However , low fluid level may be caused by a leak and a checkup may be needed. Use [...]

Fuel System Hoses Electronic Fuel Injection high pr essure fuel systems are designed with hoses which have unique material charac- teristics to provide adequate sealing and r esist attack by deteriorated gasoline. Use only the manufacturers specified hoses in any fuel system servicing. It is mandatory to replace all clamps that have been loosened o[...]

CAUTION! Using a transmission fluid other than the manufac- turers recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than the manufacturers recommended fluid will result in more frequent fluid and filter changes. Refer to Recommended Fluids, Lubricants and Genu[...]

5. Remove the dipstick and determine if the fluid is hot or warm. Hot fluid is approximately 180 ° F (82 ° C), which is the normal operating temperature after the vehicle has been driven at least 15 miles (24 km). The fluid cannot be comfortably held between the finger tips. Cold is when the fluid is below 80 ° F (27 ° C). 6. W ipe the dipstick[...]

• Police, taxi, limousine, commercial type operation, or trailer towing where the vehicle is driven r egularly for more than 45 minutes of continuous operation. NOTE: Refer to Section 8 of this manual for Mainte- nance Schedules. If the transmission is disassembled for any reason, the fluid and filter should be changed. Special Additives Do not a[...]

The following maintenance recommendations will enable you to obtain maximum benefit from the corr osion resistance built into your vehicle. What Causes Corrosion? Corrosion is the r esult of deterioration or removal of paint and protective coatings fr om your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation. • St[...]

CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the [...]

• If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use Mopar touch up paint on scratches as soon as possible. Y our dealer has touch up paint to match the color of your vehicle. Interior Care Use Mopar Fabric Cleaner to clean fabric upholstery and carpeting. Use Mopar V inyl Cleaner to clean vinyl [...]

1. Remove all dirt with a wet soft rag. A mild soap solution may be used, do not use high alcohol content or abrasive cleaners. Glass cleaners are not r ecommended. If soap is used, wipe clean with a clean damp rag. 2. T o maintain the high gloss shine, apply a scratch and swirl remover onto a damp cloth and apply to door applique. Rub the applique[...]

If the belts need cleaning, use a mild soap solution or lukewarm water . Do not remove the belts fr om the car to wash them. Replace the belts if they appear frayed or worn or if the buckles do not work properly . Cleaning The Instrument Panel and Underseat Cup Holders Removal Remove the ash receiver fr om the convenience tray if there is a smoker [...]

Cleaning Soak the drawer , with the drawer front facing up, in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately one hour . After one hour pull the drawer from the water and dip it back into the water about six times. This will loosen any remaining debris. Rinse the drawer thor oughly un- der wa[...]

Cavity Maxi Fuse Description F4 30 Amp Pink Front W ipers F9 40 Amp Green Anti-Lock Brake System (ABS) Pump F10 40 Amp Green Front Blower F13 40 Amp Green Electronic Back Light (EBL) F19 40 Amp Green Body Control Module (BCM) Feed 1 F20 30 Amp Pink Central Amplifier F22 30 Amp Pink Seats F27 40 Amp Green Radiator Fan Cavity Maxi Fuse Description F2[...]

Cavity Mini Fuse Description F1 20 Amp Y el- low Fog Lights F2 15 Amp Blue Left Park/T ail Light F3 15 Amp Blue Right Park/T ail Light F5 20 Amp Y el- low RDO/IP Ignition F6 20 Amp Y el- low 12 V olt Out Ignition or Battery F8 20 Amp Y el- low Horn F1 1 20 Amp Y el- low EWD/ Rear W iper F12 25 Amp Clear Rear Blower F14 20 Amp Y el- low Ignition Off[...]

CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the [...]

air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will insure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Center & Rear Dome Light .................. 5 7 8 Center &am[...]

BULB REPLACEMENT Headlights 1. Remove the thr ee screws securing the headlight mod- ule. 2. T urn the bulb socket retaining ring or the bulb assem- bly counterclockwise. 3. Disconnect the electrical connector and r eplace the bulb. NOTE: On some vehicles it may be necessary to slide the red r elease lock rearwar d and push forward on the connector [...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Front Park/T urn Signal and Sidemarker Lights 1. Remove the thr ee screws securing the headlight mod- ule. 418 MAINT AINING YOUR VEHICLE[...]

2. T wist the turn signal socket to remove fr om the headlight module and pull bulb from socket. 3. Replace bulb, reinstall socket and then reinstall the headlight module. Front Fog Light 1. Reach behind the fr ont fascia from under the vehicle. 2. T wist the front fog light bulb to r emove from the fog light housing. 3. Disconnect the electrical c[...]

Rear T ail, Stop, T urn Signal, Side Marker and Back-up Lights 1. Raise the liftgate. 2. Remove the two tail light assembly push-in type fasteners, by prying under the fastener head with a large flat screwdriver . 3. Squeeze the socket assembly tabs to r emove it from the housing. 4. Pull the bulb to r emove it from the socket. 5. Replace the bulb,[...]

Center High Mounted Stop Light (CHMSL) 1. Remove the two scr ews securing the CHMSL. 2. T wist the bulb socket to remove fr om the CHMSL housing. 3. Pull the bulb out of the socket. 4. Replace the bulb, r einstall the socket and reattach the CHMSL. License Light 1. Remove the two lens assembly mounting scr ews. 2. Pull the bulb out of the socket. R[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 87 Octane 20 Gallons 76 Liters Engine Oil-with filter 3.3 & 3.8 Liter Engines (SAE 5W -20, API Certified) 5.0 qts 4.7 Liters Cooling System * 3.3 & 3.8 Liter Engines (Mopar 威 Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) 13.4 qts 12.6 Liters * Includes heater and coolant recovery b[...]

RECOMMENDED FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) Engine Oil Use API Certified SAE 5W -20 engine oil. Refer to your oil filler cap for cor- rect SAE grade, meeting DaimlerChrysl[...]

Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. Power Steering Reservoir Mopar 威 A TF+4 Auto[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ........ 4 2 6 䡵 Maintenance Schedules ................... 4 2 6 ▫ Schedule “ B ” ........................ 4 2 9 ▫ Schedule “ A ” ........................ 4 3 7 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “ Scheduled ” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reli[...]

• T axi, police, or delivery service (commercial ser - vice). 〫 • Off-r oad or desert operation. NOTE: Most vehicles are operated under the conditions listed for Schedule ⬙ B ⬙ . Second is Schedule “ A ” . It is for vehicles that are not operated under any of the conditions listed under Sched- ule ⬙ B ⬙ . Use the schedule that bes[...]

Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder and transmission, add as needed. • Check all lights and all other electrical items for correct operation. At Each Oil Change ?[...]

SCHEDULE “ B ” Follow schedule “ B ” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (96 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 . • Day or night temperatures ar e below 32 ° F[...]

Miles 3, 000 6, 000 9, 000 12, 000 15, 000 18, 000 (Kilometers) (5 000 ) (10 000 ) (14 000) (19 000) (24 000) (29 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires X X X Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * XXXX X Replace the engine air cleaner filter . *X Replace the air[...]

Miles 21, 000 24, 000 27, 000 30, 000 33, 000 36, 000 (Kilometers) (34 000) (38 000) (43 000) (48 000) (53 000) (58 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires X X X Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * XXX X X Replace the engine air cleaner filter . X Inspect the t[...]

Miles 39, 000 42, 000 45, 000 48, 000 51, 000 54, 000 (Kilometers) (62 000) (67 000) (72 000) (77 000) (82 000) (86 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires X X X Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * XX XX X Replace the engine air cleaner filter . *X Replace the [...]

Miles 57, 000 60, 000 63, 000 66, 000 69, 000 72, 000 (Kilometers) (91 000) (96 000) (101 000) (106 000) (1 10 000) (115 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires X X X Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * X XXX X Replace the engine air cleaner filter . X Inspect [...]

Miles 75, 000 78, 000 81, 000 84, 000 87, 000 90, 000 (Kilometers) (120 000) (125 000) (130 000) (134 000) (139 000) (144 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires X X X Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * XXXX Replace the engine air cleaner filter XX Replace the[...]

Miles 93, 000 96, 000 99, 000 100, 000 102, 000 105, 000 (Kilometers) (149 000) (154 000) (158 000) (160 000) (163 000) (168 000) Change engine oil and engine oil filter . X X X X X Rotate T ires X X Inspect the brake linings. X Inspect the engine air cleaner filter , replace if necessary . * XXXXX Replace the engine air cleaner filter *X Inspect t[...]

Miles 108, 000 1 11, 000 114, 000 1 17, 000 120, 000 (Kilometers) (173 000) (178 000) (182 000) (187 000) (192 000) Change engine oil and engine oil filter . XXXX X Rotate T ires X X X Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * XXXX Replace the engine air cleaner filter . X Inspect the tie rod en[...]

SCHEDULE “ A ” Miles 6, 000 12, 000 18, 000 24, 000 30, 000 36, 000 (Kilometers) (10 000) (19 000) (29 000) (38 000 ) (48 000) (58 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Rotate T ires X XXXXX Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * X XX[...]

Miles 42, 000 48, 000 54, 000 60, 000 66, 000 72, 000 (Kilometers) (67 000) (77 000) (86 000) (96 000) (106 000) (1 15 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X XXXX Rotate T ires X X XXXX Inspect the brake linings. X X Inspect the engine air cleaner filter , replace if necessary . * XX X X X Replace [...]

Miles 78, 000 84, 000 90, 000 96, 000 100, 000 (Kilometers) (125 000) (134 000) (144 000) (154 000) (160 000) [Months] [78] [84] [90] [96] Change engine oil and engine oil filter . X X X X Rotate T ires X X X X Inspect the brake linings. X Inspect the engine air cleaner filter , replace if neces- sary . * XX X X Replace the engine air cleaner filte[...]

Miles 78, 000 84, 000 90, 000 96, 000 100, 000 (Kilometers) (125 000) (134 000) (144 000) (154 000) (160 000) [Months] [78] [84] [90] [96] Flush and replace the engine coolant at 100,000 miles, if not done at 60 months. X Replace the air conditioning filter . X X 440 SCHEDULE “ A ” 8 M A I N T E N A N C E S C H E D U L E S[...]

Miles 102, 000 108, 000 1 14, 000 120, 000 (Kilometers) (163 000) (173 000) (182 000) (192 000) [Months] [102] [108] [114] [120] Change engine oil and engine oil filter . X X X X Rotate T ires X X X X Inspect the brake linings. X Inspect the engine air cleaner filter , replace if necessary . * X X X Replace the engine air cleaner filter . X Inspect[...]

* This maintenance is recommended by the manufactur e to the owner but is not requir ed to maintain the emis- sions warranty . ‡ This maintenance is not requir ed if previously r eplaced. Inspection and service should also be performed anytime a malfunction is observed or suspected. Retain all re- ceipts. W ARNING! Y ou can be badly injured worki[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle ....................... 4 4 4 ▫ Prepar e For The Appointment ............ 4 4 4 ▫ Prepar e A List ........................ 4 4 4 ▫ Be Reasonable W ith Requests ............. 4 4 4 䡵 If Y ou Need Assistance ................... 4 4 5 䡵 W arran[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you ’ re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle ?[...]

IF YOU NEED ASSIST ANCE The manufacturer and its dealers ar e vitally interested in your satisfaction. W e want you to be happy with our products and services. W arranty service must be done by an authorized Chrysler , Dodge, or Jeep dealer . W e strongly r ecommend that you take your vehicle to you selling dealer . They know you and your vehicle b[...]

DaimlerChrysler Motors Corporation Customer Center P .O. Box 21 – 8004 Auburn Hills, MI 48321 – 8004 Phone: (800) 992-1997 DaimlerChrysler Canada Inc. Customer Center P .O. Box 1621 W indsor , Ontario N9A 4H6 Phone — (800) 465 – 2001 In Mexico contact: A v . Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P . 05109 Mexico, D. F . In Mexic[...]

contract, call the manufacturer ’ s Service Contract Na- tional Customer Hotline at 1-800-521-9922. The manufacturer will not stand behind any service contract that is not the manufacturer ’ s Service Contract. It is not responsible for any service contract other than the manufacturer ’ s Service Contract. If you pur chased a service contract[...]

U.S. ONL Y 448 IF YOU NEED CONSUMER ASSIST ANCE[...]

MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer . They will help you keep your vehicle operating at its best. REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immedi[...]

PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover or ders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street addr ess is required when or dering manuals. (No P .O. Boxes). •[...]

Call T oll Free at 1 – 800 – 890 – 4038 (U.S.) or 1 – 800 – 387 – 1 143 (Canada) Or V isit us on the W orld W ide W eb at: www .techauthority .daimlerchrysler .com or www .daimlerchrysler .ca/manuals DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the Natio[...]

W ARNING! The traction grade is based on braking (straight- ahead) traction tests and does not include cornering (turning) performance. T emperature Grades The temperature grades ar e A (highest), B, and C, repre- senting the tire ’ s r esistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions o[...]

INDEX 10[...]

Adding Fuel ........................... 3 3 6 Adding W asher Fluid .................. 290,393 Additives, Fuel ......................... 3 3 4 Adjustable Pedals ....................... 1 5 0 Air Conditioner Maintenance ............... 3 8 9 Air Conditioning ..................... 266,271 Air Conditioning Controls ................. 2 6 6 Air Condition[...]

Interlock System ....................... 3 0 0 Reset Mode .......................... 3 0 1 Selection Of Lubricant ................ 403,424 Shifting ............................. 3 0 1 Special Additives ...................... 4 0 6 Automatic T ransmission ................... 4 0 3 Adding Fluid ......................... 4 0 4 Fluid and Filter Changes[...]

Caps, Filler Fuel ................................ 3 3 6 Oil (Engine) .......................... 3 8 3 Radiator (Coolant Pressur e) ............... 3 9 7 Car W ashes ............................ 4 0 7 Carbon Monoxide W arning ................. 3 3 5 Cargo Compartment Luggage Carrier ....................... 1 8 5 Cargo (V ehicle Loading) ...........[...]

Computer , T rip/T ravel .................... 1 5 8 Console, Overhead ....................... 1 5 4 Console, Removable ................... 179,180 Contract, Service ........................ 4 4 6 Coolant Pressur e Cap ..................... 3 9 7 Cooling System ......................... 3 9 4 Adding Coolant (Antifreeze) .............. 3 9 6 Coolant [...]

Door Locks, Automatic .................... 1 9 Door Opener , Garage ..................... 1 6 3 Drive Belts ............................ 3 8 4 Drive Shaft Universal Joints ................ 3 9 1 Driving On Slippery Surfaces .................... 3 6 9 DVD Player ............................ 2 4 6 Electric Remote Mirrors .................... 9 4 Elec[...]

T emperature Gauge ..................... 2 0 3 Exhaust Gas Caution .............. 38,83,335,394 Exhaust System ......................... 3 9 3 Extender , Seat Belt ........................ 5 3 Exterior Folding Mirrors ................... 9 3 Filters Air Cleaner .......................... 3 8 5 Air Conditioning .................... 288,390 Automatic[...]

Fuel System Caution ..................... 3 3 4 Fueling ............................... 3 3 6 Fuses ................................ 4 1 2 Garage Door Opener ..................... 1 6 3 G a s C a p .............................. 3 3 6 Gasoline .............................. 3 3 2 Gasoline, Clean Air ...................... 3 3 3 Gasoline, Reformulat[...]

Ignition K e y ................................. 1 2 Illuminated Entry ........................ 1 6 Immobilizer ............................ 1 3 Indicator , T raction Control ................. 2 0 6 Infant Restraint .......................... 7 0 Information Center ...................... 1 5 9 Information Center , V ehicle ................. 1 5 9 I[...]

Lead Free Gasoline ...................... 3 3 2 Liftgate ................................ 3 5 Lights .............................. 85,138 Airbag ........................ 58,68,84,202 Alarm .............................. 2 0 3 Anti-Lock ........................... 2 0 2 Automatic Headlights ................... 1 4 0 Back-Up ........................[...]

Service ........................... 416,417 Service Engine Soon (Malfunction Indicator) . . . 205 Side Marker .......................... 4 2 0 Theft Alarm .......................... 2 0 3 T urn Signal ..................... 142,418,420 V oltage ............................. 2 0 2 W arning (Instrument Cluster Description) ..... 1 9 9 W asher Fluid ..[...]

Outside .............................. 9 4 Rearview ............................. 9 2 V anity ............................... 9 5 Modifications/Alterations, V ehicle ............. 7 Monitor , T ire Pressur e System ............... 3 2 7 Mopar Parts ......................... 379,449 Multi-Function Control Lever ............... 1 4 2 Navigation Syste[...]

Parking On Hill ......................... 3 0 3 Passing Light ........................... 1 4 3 Pedals, Adjustable ....................... 1 5 0 Pets, T ransporting ........................ 7 8 Phone, Cellular .......................... 9 6 Phone, Hands-Free ....................... 9 6 Placard, T ire and Loading Information ......... 3 1 5 Power Br[...]

Rear Seat Removal .................... 124,126 Rear Seating Flexibility ................. 128,130 Rear W indow Defroster ................... 2 9 1 Rear W indow Features .................... 2 8 8 Rear W iper/W asher ................... 289,290 Rearview Mirrors ........................ 9 2 Reclining Front Seats ..................... 1 1 2 Recommende[...]

And Pregnant W omen ................... 5 3 Center Lap Belt ........................ 5 1 Child Restraint ......................... 6 9 Extender ............................. 5 3 Front Seat ............................ 4 3 Pretensioners .......................... 5 1 Rear Seat ............................. 4 3 Untwisting Procedur e .................[...]

Spark Plugs ............................ 3 8 5 Speed Control .......................... 1 5 1 Speedometer ........................... 2 0 0 Starting ............................... 2 9 6 Engine Fails to Start .................... 2 9 7 Starting and Operating .................... 2 9 6 Starting Procedur es ...................... 2 9 6 Steering Colum[...]

T ire Identification Number (TIN) ............. 3 1 3 T ire Markings .......................... 3 1 0 T ire Safety Information .................... 3 1 0 T i r e s ............................ 85,318,451 Air Pressur e .......................... 3 1 8 Alignment ........................... 3 2 6 Chains .............................. 3 3 0 Changing ..[...]

Selection of Lubricant ................ 403,424 T ransmission ........................... 4 0 3 Automatic ........................... 4 0 3 Filter ............................... 4 0 5 Fluid ............................ 403,424 T ransmitter Battery Service .................. 2 6 T ransmitter , Garage Door Opener ............ 1 6 3 T ransmitter Prog[...]

W ashing V ehicle ......................... 4 0 7 Wheel Alignment and Balance ............... 3 2 6 Wheel and Wheel T rim .................... 4 0 8 Wheel Bearings ......................... 4 0 6 W ind Buffeting ....................... 41,171 W indow Fogging ........................ 2 8 7 W indows .............................. 3 9 Power ..........[...]

NOTES[...]