English dropdown-ico

Cisco NME-16ES-1G manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Cisco NME-16ES-1G, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Cisco NME-16ES-1G one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Cisco NME-16ES-1G. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Cisco NME-16ES-1G should contain:
- informations concerning technical data of Cisco NME-16ES-1G
- name of the manufacturer and a year of construction of the Cisco NME-16ES-1G item
- rules of operation, control and maintenance of the Cisco NME-16ES-1G item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Cisco NME-16ES-1G alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Cisco NME-16ES-1G, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Cisco service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Cisco NME-16ES-1G.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Cisco NME-16ES-1G item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Corporate Headquarters: Copyright © 2005 Cisco Systems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco EtherSwitch Service Modules Feature Guide Note This document describes the Cisco EtherSwitch serv ice modu le only . For infor mation about th e Cisco Ethernet switch netw ork module, see ?[...]

  • Page 2

    Cisco EtherSwi tch Service Mo dules Feature Guide Contents 2 Cisco IOS Release 12.2(25)SEC Finding Support Information for Platforms and Cisco IOS Software Images Use Cisco Feature Na vigato r to fi nd information about platform support and Cisco IOS softwa re image support. Access Cisco Feature Navigator at http://www .cisco.com/go/fn . Y ou must [...]

  • Page 3

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 3 Cisco IOS Release 12.2(25)SEC Hardware Overview Cisco EtherSwitch service modules are modules to which you can connect devices such as Cisco IP phones, Cisco wireless access points, workstations, and other netwo rk de vices such as servers, [...]

  • Page 4

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 4 Cisco IOS Release 12.2(25)SEC • NME-XD-48ES-2S-P—Extended double-wi de Cisco EtherSwitch servi ce module wit h 48 10/100-Mbps PoE ports, and 2 small form-fact or pluggable (SFP) Gigabit Ethernet ser vice module ports • NME-XD-24ES-1S-[...]

  • Page 5

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 5 Cisco IOS Release 12.2(25)SEC Ease-of-Use and Ease-of-D eployment Features • Express Setup for quickl y config uring a Cisco Ethe rSwitch service module for th e f irst time with basic IP information, contact in formatio n, Cisco EtherSwit[...]

  • Page 6

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 6 Cisco IOS Release 12.2(25)SEC • Cisco Group Management Protocol (CGMP) serv er support and Inte rnet Group Man agement Protocol (IGMP) s nooping fo r IGMP versions 1, 2, and 3: – (For CGMP de vices) CGMP fo r limiting multi cast traf f [...]

  • Page 7

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 7 Cisco IOS Release 12.2(25)SEC Manageability Features Note The encrypted Secure Shell (SSH) f eature listed in this section is a v ailable o nly on the cryptographic versions of t he Cisco EtherSwitc h serv ice module softwar e image. • Cis[...]

  • Page 8

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 8 Cisco IOS Release 12.2(25)SEC • IEEE 802.1D Spanning T ree Prot ocol (STP) for r edundant back bone connections and loop-free networks. STP has these features: – Up to 128 spanning-tree instances supported. – Per-VLAN spanning-tree pl[...]

  • Page 9

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 9 Cisco IOS Release 12.2(25)SEC • V oice VLAN for crea ting subnets fo r voice traf f ic from Ci sco IP phones. • VLAN 1 minimization for red ucing the risk of spanning-tree loops or stor ms by allo wing VLAN 1 to be disabled on an y indi [...]

  • Page 10

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 10 Cisco IOS Release 12.2(25)SEC • Kerberos sec urity system to authenticat e requests fo r network reso urces by using a tru sted third party (requir es the cryptographi c versio ns of the Cisco EtherSwitch service module softw are image) [...]

  • Page 11

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 11 Cisco IOS Release 12.2(25)SEC • Egress queues and scheduling – Four egress queues p er port. – WTD as the congestion-avoidance mechanism fo r managing th e queue lengths and pro viding drop precedences for different traf f ic classif [...]

  • Page 12

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 12 Cisco IOS Release 12.2(25)SEC Cisco StackWise Concepts This section des cribes the concep ts applicable t o switch stacks of Cisco EtherSwitc h service modules. • Overvie w of Switch Stack s, page 12 • Switch Stack M embership, page 13[...]

  • Page 13

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 13 Cisco IOS Release 12.2(25)SEC A switc h stac k is a set of Cisco Ether Switch service modules or Catalyst 3750 switch es connected through their C isco StackWise ports. One of the Cisco EtherSwitch serv ice modules or one of the Catalyst 37[...]

  • Page 14

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 14 Cisco IOS Release 12.2(25)SEC A standalone Ci sco EtherSwitch servic e module o r Catalyst 37 50 switch is a switch stack w ith one stack member that also operates as the stack master . Y ou can connect one standalone Cisco EtherSwitch ser[...]

  • Page 15

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 15 Cisco IOS Release 12.2(25)SEC The Cisco EtherSwitch service module or switch using the v ersions listed belo w ar e ordered from highest t o lowest priority: – Cryptographic IP ser vices image – Noncryptographic IP services image – Cr[...]

  • Page 16

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 16 Cisco IOS Release 12.2(25)SEC A ne w , out-of-the-box Ci sco EtherSwitch serv ice module (one that has not joined a switch stack or has not been manually assigned a stack member number) ships wit h a default st ack member number of 1. When[...]

  • Page 17

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 17 Cisco IOS Release 12.2(25)SEC Switch Stack Software Compa tibility Recommendations All stack members must run the same Cisco IOS softwa re v ersion to ensure co mpatibility between stack members. W e recommend the follo wing: • The Cisco [...]

  • Page 18

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 18 Cisco IOS Release 12.2(25)SEC Minor Incompatibility Between Cisco EtherSwitch Service Modules Cisco EtherSwitch service modules or Cat alyst 3750 switches wi th the same major ve rsion number b ut a different minor v ersion number as the s[...]

  • Page 19

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 19 Cisco IOS Release 12.2(25)SEC The interface-specif ic configuration of each stack me mber is associated with the stack member number . As mentioned in the “Sta ck Member Nu mbers” se ction on p age 15 , stack members retain their number[...]

  • Page 20

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 20 Cisco IOS Release 12.2(25)SEC Be careful when using multiple CLI sessions to the stack master . Commands that you enter in one session are not disp layed in the other sessions. T herefore, it i s possible that you might not be able to iden[...]

  • Page 21

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 21 Cisco IOS Release 12.2(25)SEC • Other Considerations for Cluster St andby G roups, page 28 • Automatic Reco very of Clus ter Conf iguration, page 29 • IP Addresses in Clusters, page 30 • Hostnames in Clusters, page 30 • Passwords [...]

  • Page 22

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 22 Cisco IOS Release 12.2(25)SEC If you want to maintain the same le vel of featu re support when a standb y command de vice takes o v er , it should run the same release of Ci sco IOS softwa re that the command de vice runs. Candidate and Me[...]

  • Page 23

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 23 Cisco IOS Release 12.2(25)SEC Figure 1 Discovery Thr ough CDP Hops Discovery of Candidates and Members Through Non- CDP-Capable and No ncluster-Capable Devices If a cluster command switch is connected to a non-CDP-ca pable thir d-party hub [...]

  • Page 24

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 24 Cisco IOS Release 12.2(25)SEC Discovery of Candidates and Members Through Different VLANs If the cluster command switch i s a Cisco EtherSwitc h service module, the cluster can ha ve cluster member switches in dif ferent VLANs. As cluster [...]

  • Page 25

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 25 Cisco IOS Release 12.2(25)SEC • Switch 9 because automatic d iscov ery does not ex te nd be yond a non candidate de vice, which is switch 7 Figure 4 Discovery Thr ough Diff er ent Management VLANs with a Lay er 3 Cluster Command Swi tch D[...]

  • Page 26

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 26 Cisco IOS Release 12.2(25)SEC Figure 5 Discovery Thr ough Routed P orts Discovery of Newly Instal led Switches in Clusters T o join a cluster , the ne w , out-of-the-box switch mu st be connected to the cluster thro ugh one of its access p[...]

  • Page 27

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 27 Cisco IOS Release 12.2(25)SEC HSRP and Standby Clus ter Command Switches The switch supports Hot Standb y Router P rotocol (HSRP) so that you can con figur e a group of standb y cluster command switches. Because a cluster co mmand switch ma[...]

  • Page 28

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 28 Cisco IOS Release 12.2(25)SEC Virtual IP Addresses in Clusters Y ou need to assign a unique virtual IP ad dress and group number and name to the cluster stand by group . This information must be conf igur ed on a specif ic VLAN or routed p[...]

  • Page 29

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 29 Cisco IOS Release 12.2(25)SEC • Each standb y-group member ( Figure 7 ) must be connected to th e cluster command switch through the same VLAN. In this e xample, the clus ter co mmand switch and standby cluster command switches are Cisco [...]

  • Page 30

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 30 Cisco IOS Release 12.2(25)SEC • This limitation applies to all clusters: If t he activ e cluster comman d switch fails and becomes acti v e again, it does not disco v er any Catalyst 1900, Catalyst 2820, an d Catalyst 2916M XL cl uster m[...]

  • Page 31

    Cisco EtherSwitch Service Mo dules Feature Guide Information About the Cisco Eth erSwitch Service Module s 31 Cisco IOS Release 12.2(25)SEC Passwords in Clusters Y o u do not need to assi gn passwords to an individual switch if it will be a clus ter member . When a switch joins a cluster , it inherits the command-swi tch password and retains it whe[...]

  • Page 32

    Cisco EtherSwi tch Service Mo dules Feature Guide Information About th e Cisco EtherSw itch Service Modules 32 Cisco IOS Release 12.2(25)SEC Recall that stack members w ork together to beha v e as a unif ied system (as a single switch stack) in the network and are presented to the network as such b y Layer 2 and Layer 3 protocol s. Therefore, the s[...]

  • Page 33

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 33 Cisco IOS Release 12.2(25)SEC • If the cluste r command switch is a switch s tack and ne w st ack masters are simultan eously el ected in the cluster command switch stack and in cluster member switch stacks, c onnectivity between the switch [...]

  • Page 34

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 34 Cisco IOS Release 12.2(25)SEC • For de vice manager requirements, see the “System Requi rements” section in th e release notes (not orderable b ut av ailable on Cisco.com). • For Netw ork Assistant requirements, see Getti ng Started w[...]

  • Page 35

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 35 Cisco IOS Release 12.2(25)SEC The interface numbering format on th e Cisco EtherSwitch service mo dule is stac k-member -number /0/ switc h-port . For more detail ed informati on about int erface types, see the Catalyst 3750 Switc h Softwar e [...]

  • Page 36

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 36 Cisco IOS Release 12.2(25)SEC Configuring the Cisco EtherSwitch Service Module in the Router This section descri bes ho w to perform the initial co n fi guration on the ro uter with a Cisco EtherSwitch service mo dule installe d. This sect io[...]

  • Page 37

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 37 Cisco IOS Release 12.2(25)SEC Step 3 enable Example: Router# enable Enters pri vileged EXEC mode. Step 4 show running configuration Example: Router# show running config interface gigabitethernet1/0 Displays the running conf iguration of the ro[...]

  • Page 38

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 38 Cisco IOS Release 12.2(25)SEC Step 13 enable Example: Switch> enable Enters pri vile ged EXEC mode on the Cisco EtherSwit ch service module. Step 14 show ip interface brief Example: Switch# show ip interface brief Displays brief v ersion o[...]

  • Page 39

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 39 Cisco IOS Release 12.2(25)SEC Examples This section provides the follo wing e xamples: • Sample Output for the di r flash: Command on the Router , page 39 • Sample Output for the boot f lash: Command on the Router , p age 39 • Sample Out[...]

  • Page 40

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 40 Cisco IOS Release 12.2(25)SEC Sample Output for the show running config Command on the Router The follo wing example sho ws what appears when you enter the show running conf ig command: Router# show running config interface gigabitethernet2/0[...]

  • Page 41

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 41 Cisco IOS Release 12.2(25)SEC Sample Output for the show ip interface brief Command on the Cisco E therSwitch Service Module The follo wing example sho ws what appears when you enter the show ip interface brief command: Switch# show ip interfa[...]

  • Page 42

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 42 Cisco IOS Release 12.2(25)SEC Default Settings After Initial Cisco Et herSwitch Service M odule Configuration The Cisco EtherSw itch servi ce module is designed fo r plug-and-play operation. Y ou need only assign basic IP information to the G[...]

  • Page 43

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 43 Cisco IOS Release 12.2(25)SEC Default VLAN VLAN 1 VLAN trunking Dynamic auto (DTP) T runk encapsulati on Negot iate VTP 4 mode Server VTP version 1 V oice VLAN D isabled STP 5 PVST+ 6 enabled o n VLAN 1 MSTP 7 Disabled Optional spanning-tree f[...]

  • Page 44

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 44 Cisco IOS Release 12.2(25)SEC Configuring the Cisco EtherSwitch Se rvice Module Using the Switch Setup Program This section describes ho w to conf igure the Cisco EtherSwitch service module, u sing the setup program on the service module to c[...]

  • Page 45

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 45 Cisco IOS Release 12.2(25)SEC • Enable password • T elnet password Note If your Cisco EtherSwitch service modules are stack ed and there are multiple consol e connections to indi vidual Cisco EtherSwitch servi ce modules in the st ack, the[...]

  • Page 46

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 46 Cisco IOS Release 12.2(25)SEC Examples This section provides the follo wing e xamples: • Sample Output for Initial Con fig uration Dialog and Basic Management Ini tiation, page 46 • Sample Output for Entering an Interface Name, page 47 ?[...]

  • Page 47

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 47 Cisco IOS Release 12.2(25)SEC Basic management setup configures only enough connectivity for management of the system, extended setup will ask you to configure each interface on the system. Would you like to enter basic management setup? [yes/[...]

  • Page 48

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Module 48 Cisco IOS Release 12.2(25)SEC Sample Output for Saving the Configuration to NVRAM The follo wing example sho ws what appears when yo u save the Cisco EtherSwitch service module configuration to NVRAM: [0] Go to the IOS command prompt without [...]

  • Page 49

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco E therSwitch Service Module 49 Cisco IOS Release 12.2(25)SEC Examples This section provides the follo wing e xamples: • Sample Outpu t for the service-modu le gigabitethernet sh utdown Command, page 49 • Sample Output for the service-modul e gigabitethern et reset Comma[...]

  • Page 50

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Modu le in a Switch Stac k 50 Cisco IOS Release 12.2(25)SEC How to Configure the Cisco EtherSwitch Service Module in a Switch Stack This section descri bes ho w to conf igure the Cisco EtherSwit ch service module in a swit ch stack. A switch stac k is [...]

  • Page 51

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco EtherSwit ch Service Modu le in a Switc h Stack 51 Cisco IOS Release 12.2(25)SEC Default Switch Stack Configuration Ta b l e 3 shows the def ault switch stack conf igurat ion. Prerequisites • When the IP services image is running on the st ack master , the Cisco Ethe rSwi[...]

  • Page 52

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Modu le in a Switch Stac k 52 Cisco IOS Release 12.2(25)SEC • Removing po wered-up stack members from the stack causes the Cisco EtherSwitch service module stack to di vide (partition) into two or more swit ch stacks, each with the same conf iguratio[...]

  • Page 53

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco EtherSwit ch Service Modu le in a Switc h Stack 53 Cisco IOS Release 12.2(25)SEC Examples This section provides the follo wing e xamples: • Sample Output for the switch renu mber Command, page 53 • Sample Outpu t for the reload slot Comm and, page 53 • Sample Output f[...]

  • Page 54

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Modu le in a Switch Stac k 54 Cisco IOS Release 12.2(25)SEC Sample Output for the show switch Command The follo wing example sho ws what appears when you enter the show switch command: Switch# Role Mac Address Priority State ---------------------------[...]

  • Page 55

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure the Cisco EtherSwit ch Service Modu le in a Switc h Stack 55 Cisco IOS Release 12.2(25)SEC Examples This section provides the follo wing e xamples: • Sample Output for the switch pr iority Command, p age 55 • Sample Output for the sho w switch Command , page 55 Sample Output for [...]

  • Page 56

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure the Cisco EtherSwitc h Service Modu le in a Switch Stac k 56 Cisco IOS Release 12.2(25)SEC DETAILED ST EPS Step 1 Use the show platform stack-manager command to display platform-depen dent switch-stack information. Use th e show platf orm stack-manager all command to display all inf[...]

  • Page 57

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure a Switch Clu ster 57 Cisco IOS Release 12.2(25)SEC Switch(config)# show switch neighbors Switch # Port A Port B -------- ------ ------ 6 None 8 8 6 None • Use the show switch stack-ports user EXEC command to display po rt status on the stack members: Switch(config)# show switch sta[...]

  • Page 58

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure a Sw itch Cluster 58 Cisco IOS Release 12.2(25)SEC This section contains the following procedures: • Using the CLI to Manage Switch Clusters, page 58 • Adding Cluster Member s to the Cisco EtherSwitch Service Module, page 60 • Creating a Cluster Standb y Group, page 62 Using t[...]

  • Page 59

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure a Switch Clu ster 59 Cisco IOS Release 12.2(25)SEC Examples This section provides the follo wing e xamples: • Sample Output for the rcommand and sh ow version Commands, page 59 • Sample Output for the sho w cluster members Co mmand, page 59 Sample Output for the rcommand and show[...]

  • Page 60

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure a Sw itch Cluster 60 Cisco IOS Release 12.2(25)SEC Adding Cluster Members to the Cisco EtherSwitch Service Module This section sho ws ho w to ad d cluster members to the Cisco EtherSwitch service module. The cluster command service modu le or switch auto matically d iscov ers candid[...]

  • Page 61

    Cisco EtherSwitch Service Mo dules Feature Guide How to Configure a Switch Clu ster 61 Cisco IOS Release 12.2(25)SEC DETAILED STEPS FROM THE NETWORK ASSISTANT APPLICATION Command or Action Purpose Step 1 Close the Add to Cluster wi ndo w . Closes the Add to Cluster windo w to vie w an up dated list of cluster members. Step 2 Choose V iew > Refr [...]

  • Page 62

    Cisco EtherSwi tch Service Mo dules Feature Guide How to Configure a Sw itch Cluster 62 Cisco IOS Release 12.2(25)SEC DETAILED STEPS FROM THE CLI Creating a Cluster Standby Group This section describes h ow to add Cisco EtherSwitch service modules to a cl uster standby gr oup and to bind the cluster standb y group to a cluster . Note Standby cluste[...]

  • Page 63

    Cisco EtherSwitch Service Mo dules Feature Guide Upgrading the Cisco EtherSwit ch Service Module Software 63 Cisco IOS Release 12.2(25)SEC Restrictions • This task is a v ailable only on the stack master . • Y ou must enter a virtual IP address for the clust er standby g roup. This address mu st be in the same subnet as the IP addresses of th e[...]

  • Page 64

    Cisco EtherSwi tch Service Mo dules Feature Guide Upgrading the Cisco E therSwitch Service Module Software 64 Cisco IOS Release 12.2(25)SEC SUMMARY STEPS 1. enable 2. conf igure termi nal 3. interfac e switch / slot/ port 4. no switchport 5. ip addr ess ip addr ess/subnet mask 6. no shutdown 7. end 8. show flash 9. copy tftp: flash: DETAILED ST EPS[...]

  • Page 65

    Cisco EtherSwitch Service Mo dules Feature Guide Upgrading the Cisco EtherSwit ch Service Module Software 65 Cisco IOS Release 12.2(25)SEC Examples This section provides the follo wing e xamples: • Sample Output for the sho w run in terface f astethernet Command, page 65 • Sample Output for the pi ng tftpserv er Command, page 65 • Sample Outp[...]

  • Page 66

    Cisco EtherSwi tch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Service Module Software 66 Cisco IOS Release 12.2(25)SEC Sample Output for the show flash: Command The follo wing example sho ws what appears when you enter the show flash: command: Switch# show flash: Directory of flash:/ 3 -rwx 4815232 Jan 1 1970 00:10:53 +00:[...]

  • Page 67

    Cisco EtherSwitch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Servic e Module Software 67 Cisco IOS Release 12.2(25)SEC Recovering from a Corrupted Software Image Using Xmodem This section describes ho w to reco ve r from a corrupted software image by using Xmod em. Note The router should ha ve the swi tch image in the rout[...]

  • Page 68

    Cisco EtherSwi tch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Service Module Software 68 Cisco IOS Release 12.2(25)SEC 7. service-module interface slot/port session 8. dir flash: 9. boot flash: image DETAILED ST EPS Command or Action Purpose Step 1 service-module interface slot/port password-reset Example: Router# service-[...]

  • Page 69

    Cisco EtherSwitch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Servic e Module Software 69 Cisco IOS Release 12.2(25)SEC Troubleshooting If the downloaded image (f iles and directories) are not in flash memory on the Cisco EtherSwitch service module, repeat St ep 1 through Step 6. If the procedure fails again, ensure that yo[...]

  • Page 70

    Cisco EtherSwi tch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Service Module Software 70 Cisco IOS Release 12.2(25)SEC Y ou are prompted for the service module int erface numbe r . Accept the default: Service Module interface number? [0]: Y o u are prompted to confirm the buf fer . A ccept the default : 1k buffer? [confirm[...]

  • Page 71

    Cisco EtherSwitch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Servic e Module Software 71 Cisco IOS Release 12.2(25)SEC Y ou a re prompted for the max retry count. Ac cept the default: Max Retry Count [10]: Y ou are prompted to c onf irm the trans fer to the Cisco EtherSwitch service module: Xmodem send on slot 2 interface [...]

  • Page 72

    Cisco EtherSwi tch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Service Module Software 72 Cisco IOS Release 12.2(25)SEC the flash filesystem, and finish loading the operating system software: flash_init load_helper boot Router: Sample Output for the flash_init Command on the Cisco EtherSwitch Service Mod ule The follo wing [...]

  • Page 73

    Cisco EtherSwitch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Servic e Module Software 73 Cisco IOS Release 12.2(25)SEC SUMMARY STEPS 1. service-module interface slot/port session 2. dir flash: 3. service-module interface slot/port passw ord-reset 4. flash_init 5. (Optio nal) load_helper filesystem:/f ile-url ... 6. ren a m[...]

  • Page 74

    Cisco EtherSwi tch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Service Module Software 74 Cisco IOS Release 12.2(25)SEC Step 6 rename Example: Switch: rename flash: config.text flash: config.text.old Renames the conf iguration f ile to conf ig.te xt.old. • Before continuing to the next command, po wer up any connected sta[...]

  • Page 75

    Cisco EtherSwitch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Servic e Module Software 75 Cisco IOS Release 12.2(25)SEC Step 12 copy running-configuration startup-configuration Example: Switch: copy running-config startup-config Copies the configuration from the running confi guration f ile to the sw itch startup co nfigu r[...]

  • Page 76

    Cisco EtherSwi tch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Service Module Software 76 Cisco IOS Release 12.2(25)SEC Recovering from a Lost or Forgotten Password When Password Recovery Is Disabled This section shows ho w to recov er from a lost or for gotten password when password reco very is disabled. When password rec[...]

  • Page 77

    Cisco EtherSwitch Service Mo dules Feature Guide Troubleshooting the Cisco EtherSwitch Servic e Module Software 77 Cisco IOS Release 12.2(25)SEC DETAILED ST EPS Command or Action Purpose Step 1 service-module interface slot/port password-reset Example: Router# service-module gigabitethernet1/0 password-reset Resets the password on the router . Step[...]

  • Page 78

    Cisco EtherSwi tch Service Mo dules Feature Guide Switch Stack Configuration Scenar ios 78 Cisco IOS Release 12.2(25)SEC Example Sample Output for the set Command The follo wing example sho ws what appears when you enter the set command: Switch: set BAUD=9600 MAC_ADDR=00:00:00:20:30:80 MANUAL_BOOT=yes SDM_TEMPLATE_ID=0 SWITCH_NUMBER=2 SWITCH_PRIORI[...]

  • Page 79

    Cisco EtherSwitch Service Mo dules Feature Guide Switch Stack Config uration Scenarios 79 Cisco IOS Release 12.2(25)SEC T able 4 Switc h Stac k Configur ation Scenar ios Scenario Action Result Stack master election specifically determined by e xisting stack masters Connect two po wered-u p switch stacks through the Cisco StackW ise por ts. Only one[...]

  • Page 80

    Cisco EtherSwi tch Service Mo dules Feature Guide Switch Stack Configuration Scenar ios 80 Cisco IOS Release 12.2(25)SEC Stack master election specifically determined by the cr yptographic IP base image Assuming that all stack members have the same priority v alue: 1. Make sure that one stack member h as the cryptographic IP base image installed an[...]

  • Page 81

    Cisco EtherSwitch Service Mo dules Feature Guide Network Configuration Examp les 81 Cisco IOS Release 12.2(25)SEC Network Configuration Examples This section descri bes network conf iguration co ncepts and includes e xamples of using the Ci sco EtherSwitch service module to cr eate dedicated network se gments and interconnect the segments through F[...]

  • Page 82

    Cisco EtherSwi tch Service Mo dules Feature Guide Network Config uration Exam ples 82 Cisco IOS Release 12.2(25)SEC Bandwidth alone is not the o nly consideration when designin g your networ k. As your netwo rk traf f ic prof iles e volv e, consider pro viding netw ork services that can support application s for voi ce and data integratio n, multim[...]

  • Page 83

    Cisco EtherSwitch Service Mo dules Feature Guide Network Configuration Examp les 83 Cisco IOS Release 12.2(25)SEC Y o u can use the Cisc o EtherSwitch servi ce module s and switch stacks to create the follo wing: • Cost-ef fect i ve wir ing closet ( Figure 8 )—A cost-ef fecti ve way to connec t man y users to the wiring closet is to hav e a swi[...]

  • Page 84

    Cisco EtherSwi tch Service Mo dules Feature Guide Network Config uration Exam ples 84 Cisco IOS Release 12.2(25)SEC • Redundant gigabit backbo ne ( Figure 9 )—Using HSRP , y ou can create backu p paths betw een two Cisco EtherSwitch service modules to en hance netw ork reliab ility and l oad balancing for dif ferent VLANs and subnets. Using HSR[...]

  • Page 85

    Cisco EtherSwitch Service Mo dules Feature Guide Network Configuration Examp les 85 Cisco IOS Release 12.2(25)SEC Figure 1 0 High-P erfor m ance Wir ing Closet Multidwelling Network Using the Cisco EtherSwitch Service Modules A growing se gment of resident ial and comme rcial customers is requ iring high-s peed a ccess to Ethernet metropolitan-area[...]

  • Page 86

    Cisco EtherSwi tch Service Mo dules Feature Guide Network Config uration Exam ples 86 Cisco IOS Release 12.2(25)SEC Figur e 1 1 Cisco EtherS witch Service Modules in a MAN C onfigur ation 121822 Service Pro vider POP Mini-POP Gigabit MAN Residential location Catalyst 3750 StackWise s witch stack Cisco integrated services router with EtherSwitch ser[...]

  • Page 87

    Cisco EtherSwitch Service Mo dules Feature Guide Additional References 87 Cisco IOS Release 12.2(25)SEC Additional References Related Documents Technical Assistance Related T opic Document T itle Hardware installatio n instructions for net work modules Cisco In terface Car ds Instal lation Guide General information about v oice conf igur ation and [...]

  • Page 88

    Cisco EtherSwi tch Service Mo dules Feature Guide Additional References 88 Cisco IOS Release 12.2(25)SEC[...]