Go to page of
Similar user manuals
-
Indoor Furnishings
Crestron electronic CLS-C6 series
8 pages 1.21 mb -
Indoor Furnishings
Crestron electronic CLS-C6RF
6 pages 0.66 mb -
Indoor Furnishings
Crestron electronic GLPS-SW-FT
108 pages 6.43 mb -
Indoor Furnishings
Crestron electronic GLPS-HSW
108 pages 6.43 mb -
Indoor Furnishings
Crestron electronic IPAC-GL1
108 pages 6.43 mb -
Indoor Furnishings
Crestron electronic GLPS-HSW-FT
108 pages 6.43 mb -
Indoor Furnishings
Crestron electronic TPS-6X-DSW
16 pages 0.72 mb -
Indoor Furnishings
Crestron electronic CLS-C6RF Series
2 pages 0.88 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Crestron electronic CLS-C6RF, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Crestron electronic CLS-C6RF one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Crestron electronic CLS-C6RF. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Crestron electronic CLS-C6RF should contain:
- informations concerning technical data of Crestron electronic CLS-C6RF
- name of the manufacturer and a year of construction of the Crestron electronic CLS-C6RF item
- rules of operation, control and maintenance of the Crestron electronic CLS-C6RF item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Crestron electronic CLS-C6RF alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Crestron electronic CLS-C6RF, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Crestron electronic service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Crestron electronic CLS-C6RF.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Crestron electronic CLS-C6RF item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Operations Guide[...]
-
Page 2
This document was prepared an d written by the Tech nical Documentation dep artment at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product nam es and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.[...]
-
Page 3
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Contents iLux ™ Integrated Lighting System w/infiNET ™ : CLS-C6RF 1 Introduc tion ................................................................................................................... ............ 1 Features and Functions ..........................................[...]
-
Page 4
[...]
-
Page 5
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ iLux ™ Integrated Lighting System w/infiNET ™ : CLS-C6RF Introduction Features and Functions • Wall-mount ed integrate d lighting a nd shade control • Six channels of dimm ing or swi tching • Six groups of shade o r drape cont rol • Linkable for up to 54 ligh ting chann[...]
-
Page 6
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF designed for 120 VAC 50/ 60 Hz instal lations; the CLS I-C6RF and C LSI-C6MR F are designed for 230 VAC 50/60 Hz installations. Th e units are functionally identical, except that the CLS/CLSI-C6MRF units include a built-in motion sensor. For simplicity in this guide, references to [...]
-
Page 7
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Multi-Unit Expansion A single CLS-C6RF master will support up to eight additio nal units, enabling systems of up to 54 li ghting z ones and 54 s hade groups . Scene recall , master dimming, a nd occupancy status are shared between the uni ts. Each indi vidual unit can still support[...]
-
Page 8
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF CLS-C6RF Specifications (Continued) SPECIFICATION DETAILS Power Requirements CLS-C6RF Line Power, 100 –127 VAC, 50 / 60Hz CLSI-C6RF Line Power, 220 – 240 VAC, 50 / 60H z Default MNET ID 1F Control System Update Files 2, 3 2-Series Control System Version 2.004.CUZ or later IR Re[...]
-
Page 9
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ NOTE : Crestron sof tware and an y files on th e website are for Authorized Crestron dealers and Crestron Au thorized Independent Programmers (CAIP) only. New us ers may be requ ired to regis ter to obta in access to certain ar eas of the sit e (includ ing the FTP s ite). Physical [...]
-
Page 10
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF CLS-C6RF Front Panel CLS-C6RF Rear Panel Connectors, Controls, & Indicators # CONNECTORS, CONTROLS, & INDICATORS DESCRIPTION 1 Bargraphs In Standard mode and Lights mode, the barg raphs, each a series of seven LEDs, indicate the current light intensity for the six lighting [...]
-
Page 11
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Connectors, Controls, & Indicators (Continued) # CONNECTORS, CONTROLS, & INDICATORS DESCRIPTION 5 Motion Detector (CLS/CLSI- C6MRF only) The built-in motion detector can be used to activate a particular scene when there is activity in the room, and/or to activate a particul[...]
-
Page 12
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Connectors, Controls, & Indicators (Continued) # CONNECTORS, CONTROLS, & INDICATORS CONTROLS, & INDICATORS DESCRIPTION DESCRIPTION 16 LOAD1 – LOAD6 Use these terminals to connect the CLS-C6RF dimmer channel outputs to the appropriate lighting loads. 17 HOT, NEUTRAL, ([...]
-
Page 13
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Setup Network Wiring When wiring the network, consider th e following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equip ment. • Provide sufficient power to the system. CAUTION: Insufficie nt power can lead to unpre dictable results or damage to [...]
-
Page 14
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF CLS-C6RF Installation Configurations * Refer to “Appendix A: Supported D evices” on page 42 for details on de vices supported by the CLS-C6RF. • iLux ™ Int egrated Lighting Sy stem w/infiNET ™ : CLS-C6RF Operations Guide - DOC. 6418 A 10[...]
-
Page 15
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Hardware Hookup Refer to the foll owing diagram for connec tion of the AC wiring. Conne ct each load wire to the corresponding LOAD terminals on the unit, connect the power line hot wire from the circuit breaker to the HOT terminal on the unit, connect all neutral wires to the NEUT[...]
-
Page 16
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Configuring the CLS-C6RF The overall co nfiguration of t he CLS-C6RF can be accom plished in tw o ways: usin g the front pan el controls, or using the supp lied iLux ™ Designer application soft ware, which can b e downloaded from the Crestron web site. Configuring via the front p[...]
-
Page 17
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ 4. If you w ould like a ce rtain light ing load to be unaff ected by that scene recall, press and hold the cent er of the button (so both sides make contact) for three seconds. The top two an d th e bottom two LEDs of the associated bargraph will be lit (and the d isplay will show [...]
-
Page 18
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Setup Mode Mnemonics TWO-DIGIT DISPLAY DESCRIPTION Sc Sc ene Programming Ld Setup lighting load L oa d type s LE Setup lighting load L ow- E nd limits HE Setup lighting load H igh- E nd limits bF b utton F unctions (i.e. recall scene, toggl e scene, shades control, etc.) ud Set fun[...]
-
Page 19
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ • If a lightin g load is defi ned as an “u nused” load ty pe, the bargrap h for that lighting load will have all LEDs off. If you try to adjust that ligh ting load, the two-digit display will show “Er.” • To mark a lighting load as "not affected " (i.e., the l[...]
-
Page 20
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Lighting Load Type Setup (Continued) Load Type Number LEDs Default LowEnd / HighEnd Fluorescent (2-wire) 4 top 4 on 10 / 100 Non-dim (On at start/Off at start)¹ 5 top 5 on 0 / 100 Non-dim (On at end/Off at start)² 6 top 6 on 0 / 100 1. Whether going on or off, this load ty pe wil[...]
-
Page 21
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Setup High-End Levels (HE) This option allows you to set the “full on” lev el of the lighting loads below their maximum brightne ss. To set the high-end levels for the six lig hting loads: • Enter Setup m ode and scroll to the “HE” opt ion (usin g the ^ and v buttons). At[...]
-
Page 22
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF When the button is release d, the LED for that button should flash once to indicate that programming took place. 2. Next, use t he up/down button t o scroll to the next functio n and value to be assigned, and a ssign the desir ed buttons . Repeat this procedure fo r each function a[...]
-
Page 23
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ • When program ming from the front panel, e xit time cannot be adjust ed or displayed. If it has not been chang ed w ith iLux Designer, or SIMPL, it will be the default of 30 m inutes. Scenes to be recall ed also cannot be change d from the front panel . If they have not been cha[...]
-
Page 24
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF • There are a number of possible error conditions that can occur during the discovery process (before Save is presse d). They are: 1. Corrupt data on network. 2. Two or m ore devices wi th same TSID n umber. 3. Invalid device ty pe found on network. (C LS-C6RF m odules o nly supp[...]
-
Page 25
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ that device will flash for one second to co nfirm that i t has been assigned. The bargraph for that group will also flash off for on e second. • Go to a shade group and as sign all cha nnels. Then g o to the next shade grou p and assign those channels. Re peat for a ll shade gro [...]
-
Page 26
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF • When acquire is done, the display will a lternate between “Ac” and result cod es. • If acquire was successful, the save led will flash, and the Cancel led will turn off. ( Cancel button is disabled). Press the Save button to go into Standard mode. • If acquire was unsuc[...]
-
Page 27
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ • Press the Cancel button to return to Standard mode wit hout saving. Supported channel se ttings are: 0 = channel disabled, 11.-.26 = Fix Channel mode, Au = Auto Channel m ode NOTE: If at any time the transceive r connection is lost be cause the serial jack was inserted, the E1 [...]
-
Page 28
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF The following are the minimum software versions required to use the iLux Designer program. ILux Designer versi on 1.02.05 or later Crestron Toolbox vers ion 1.01.11 or later Crestron Engraver version 2.5.0 o r later* Crestron Database version 17.3.0 or later* *Required only if you [...]
-
Page 29
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ sensor tim eout when t he motion se nsor funct ion is enabl ed. You can al so launc h the Crestron Engraver software pr ogram to cr eat e an engraver project for the C LS-C6RF function buttons lab el. NOTE: In systems with multiple CLS-C6RF units that have the motion senso r functi[...]
-
Page 30
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF LED Brightness These settings are for the white LEDs next to the function buttons and th e ON button, the shift LEDs, and the green bargraph LEDs. 1. At the prompt , type < WHITELEDLEVEL > or < GREENLEDLEVEL > and press Return . The system displays, for example: White l[...]
-
Page 31
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ 5. Install the front cover assembly on the unit by lining it up at the top and pressing the botto m edge until it snaps into position. Operations Guide - DOC. 6418 A iLux ™ Integrated Lighting Syste m w/infiNET ™ : CLS-C6RF • 27[...]
-
Page 32
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Programming Software IMPORTANT NOTE: The procedures in this section relate to creating a program that can include the CLS-C6RF, not to prog ramming the CLS-C6RF itself. If it is to be part of a 2-Series cont rol system , you must fi rst configure the unit usi ng the iLux ™ Design[...]
-
Page 33
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Configuration Manager Configuratio n Manager is t he view w here program mers “build” a C restron cont rol system by selecting hard ware from t he Device Library . • To incorporate the CLS-C6 RF into the system, first drag a C2N-MNETGW gateway icon from the Wireless Receivers[...]
-
Page 34
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF C2Net Device, Slot 9 • Additional C LS-C6RF d evices are assig ned differe nt MNET ID numbers as they are added. • If necessary, double click a device to open the “Device Settings” window and change the RF ID, as show n in the following figure. “CLS-C6RF Device Settings?[...]
-
Page 35
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Uploading and Upgrading Crestron recommends using the latest pr ogramming software and that each device contains the latest firmware to take advantage of the most recently released feature s. However, before attem pting to upl oad or upgrade, it is necessary to establish communicat[...]
-
Page 36
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Programs and Firmware • Upload the SIMPL Windows file to the control system using SIMPL Windows or Crestron Toolbox . • For Indirect Se rial Comm unication with the CLS-C6RF, display the network de vice tree ( Tool s | Network De vice Tree ) to show all network devices connect [...]
-
Page 37
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Operation The iLux always operates in one of four modes. The Setup m ode is used t o redefine many of the CLS-C6RF settings. Details regarding the Setup m ode are given in “Setup Mode” on page 13. The following sections prov ide detailed descrip tions of the St andard , Lights [...]
-
Page 38
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF • Recall-scene (specify scene num ber O FF, ON, 1-15). Refer to “Recall-scene buttons” bel ow. • Toggle-scene (specify scene num ber ON, 1-15). Refer to “Toggle-scene buttons” on pa ge 35. • Lighting master raise/lower (last scene). Refer to “Master (Last Scene) Rai[...]
-
Page 39
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Toggle-scene buttons • Used to alternately recall a scene or turn scene lights off (i.e., have the specified lighting loads go to off, in the specified time). • The toggle scene function sh ould not be assigne d to any sc ene that include s shades. • Note that the ON and OFF [...]
-
Page 40
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Occupancy Sensing Occupancy sensing may have specific actions specified for entry an d for ex it. Either or both of these may be disabled. A limited nu mber of actions are available when programm ed locally; m ore options are a vailable when programm ed using the iL ux Designer pro[...]
-
Page 41
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ manually adjust this ch annel after that, you must release and re-press the button. The unit remains in Lights m ode. To exit Lights mode, press the Lights button agai n (or press Cancel ), and the LED will go off. The unit is now back in Stand ard mode. (Also, if no adjustments ar[...]
-
Page 42
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF group term inates, and the new comm and takes prece dence. To m anually adjust this channel after that, you must release and re-pre ss the button. The unit remains in Sh ades mode. To exit Shades mode, press the Shades button again (or press the Cancel button); the LED will go off [...]
-
Page 43
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Problem Solving Troubleshooting The table belo w provides c orrective actio n for possible trouble sit uations. If furt her assistance is required, please contact a Cres tron custom er service representative. CLS-C6RF Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Impr[...]
-
Page 44
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF When calculat ing the lengt h of wire for a part icular Cresnet run, the wire gauge and t he Cresnet power usage of each network uni t to be connect ed must be t aken into consideration. Use Crestron Ce rtified Wire only . If Cresne t units are t o be daisy -chained on the run, the[...]
-
Page 45
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ You can also log onto the onlin e help section of the Crestron website ( www.crestron.com/onlinehel p ) to ask questions abou t Crestron products. First-time users will need to establish a user account to fully bene f it from all available features. Future Updates As Crestron impro[...]
-
Page 46
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Appendix A: Supported Devices The CLS-C6RF local devices networ k supports up to 16 remote devices consisting of keypads, shad e controllers, and add itional CLS-C6RF units. Key pads Up to 16 key pads can be a dded on the l ocal devices net work. The following t able lists default [...]
-
Page 47
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Appendix B: Console Commands Console com mands are avail able throu gh the Crestr on Toolbo x program . 1. Select Text Console from the Tools menu. 2. At the prompt, ente r HELP ALL and press Return . The system displays: iLux>HELP ALL ? display list of common commands GETCONFIG[...]
-
Page 48
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF GREENLEDLEVEL Description: Use this command to display or set the green LED level on the CLS-C6RF.* Help Menu(s): Device Synt ax: GREENLEDLEVEL <0..100> set the green leds br ightness to level <0..100> GREENLEDLEVEL display the green leds brightness level <0..100>[...]
-
Page 49
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ PUTCONFIG* Description: Use this command to load the project file to the CLS-C6RF Help Menu(s): File Synt ax: PUTCONFIG PROJECT Parameters: PROJECT – The only valid parameter value REBOOT Description: Use this command to reboot the CLS-C6RF Help Menu(s): Common Synt ax: REBOOT Pa[...]
-
Page 50
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF VERSION Description: Use this command to display the firmware version number.* Help Menu(s): Common Synt ax: VERSION Parameters: None *For exam ple, this comm and woul d produce informati on simil ar to the foll owing: CLS-C6MRF Lighting Controller with Motion [v1.00.04, #FFFD6899][...]
-
Page 51
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Appendix C: Factory Default Values ITEM DEFAULT VALUE All lighting load types. Incandescent All Low End limits 0% All High End limits 100% Function buttons recall scenes 1-6 Up/Down button lights (Last Scene Master). OFF scene on exit - disabled ON scene on entry - disabled Occupan[...]
-
Page 52
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Appendix D: Button Functions Following is a list of button func tions, in table fo rmat, one fu nction per ta ble. Each table list s Behavior, L ED Action , Applies t o, Rocker behavior, a nd Notes. Some topics may not apply to certain button types; this is defined in the “Ap pli[...]
-
Page 53
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Function name Toggle Scene (on, 1-15) Behavior Alternates between “Recall Sc ene” and “Turn Off Scene Lights” actions for the specified scene. In determini ng which action should be executed, the CLS-C6RF will check the state of all lights programmed in the scene. If any li[...]
-
Page 54
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Function name Raise/Lower Lighting Load (1-6) Behavior Pressing left side of button will act same as Lower Lighting Load. Pressing right side of button will act same as Raise Lighting Load. LED On while left or right button is pressed Applies To Shifted Rocker Rocker Behavior Descr[...]
-
Page 55
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Function name Toggle-Dim Scene (on, 1-15) Behavior Similar to the “Toggle Scene” f unction, except that a maintained press of the button will cause the lights to enter “cycle-dim” mode. That is, all lights programmed in the specified scene will either raise or lower until t[...]
-
Page 56
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Function name Open Shades Momentary (All, Group 1-6) Behavior Specified shades will move toward the Open position for as long as the button is pressed. Movement will stop when button is released. LED On while button is pressed Applies To Remote Button Rocker Behavior N/A Notes Shad[...]
-
Page 57
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Function name Open Momentary/Open Full (All, Group 1-6) Behavior A quick tap of the button will perform a “Full Open”. A maintained press will perform a “Momentary Open” until the button is released. If the shade is already moving in the open direction, a tap will stop it: [...]
-
Page 58
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF Function name External Function (1-32) Behavior Activates the corresponding “press” digital signal (press1 – press32 on the External Functions slot) on t he Cresnet S ystem connected to the CONTROL SYSTEM port. Signal will remain high for as long as the button is pressed. LED[...]
-
Page 59
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Software License Agreement This License Agreement (“Agree ment”) is a legal contract betw een you (either an individual or a single business entit y) and Crestron Electronics, Inc. (“Crestron”) for so ftware referenced in this guide, which in cludes co mputer softwa re and,[...]
-
Page 60
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Cres tron[...]
-
Page 61
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ Return and Warranty Policies Merchandise Returns / Repair Service 1. No me rchandise may be ret urned for credit, exchange or service with out prior authorization from CR ESTRON. To obtai n warranty serv ice for CREST RON products, contact an authorized CRESTRON deal er. Only autho[...]
-
Page 62
iLux ™ Integrated Lighting System w/infiNET ™ Crestron CLS-C6RF This page is intentionally left blank. • iLux ™ Int egrated Lighting Sy stem w/infiNET ™ : CLS-C6RF Operations Guide - DOC. 6418 A 58[...]
-
Page 63
Crestron CLS-C6RF iLux ™ Integrated Lighting System w/infiNET ™ This page is intentionally left blank. Operations Guide - DOC. 6418 A iLux ™ Integrated Lighting Syste m w/infiNET ™ : CLS-C6RF • 59[...]
-
Page 64
Crestron Electronics, Inc. User Guide - DOC. 6418A 15 Volvo Drive Rockleigh, NJ 07647 (2013968) Tel: 888.CRESTRON 06.08 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.[...]