D-Link DCS-3010 manual

U ser Manual HD P oE F ix ed Netw ork Camer a DCS-3010[...]

2 D-Link DCS-3010 User Manual D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in[...]

3 D-Link DCS-3010 User Manual Table of Contents Product Overview ........................................................ 4 Package Contents .... ............................................... 4 System Requirements ................ ............................. 5 Introduction .............................................................. 6 Feature[...]

4 D-Link DCS-3010 User Manual Product Overview Product Overview If any of the above items are missing, please contact your reseller. DCS-3010 HD PoE Fixed Network Camera Mounting Bracket Power Adapter CAT5 Ethernet Cable User Manual and Software on CD-ROM Quick Install Guide FU L L HD D AY & NI GH T DCS-3715 Ver . 1.0 0(W W) © 2 0 1 0 D - L i [...]

5 D-Link DCS-3010 User Manual Product Overview System Requirements  Operating System: Microsoft Windows ® , 2000, XP, Vista, 7  Memory : At least 256MB of memory (512MB recommended)  Web Browser: Internet Explorer 7 or higher, Firefox, Chrome, Safari  VGA card resolution: SVGA or XGA (1024x768 or above)  CPU: 1.7GHz or above (2.8GHz[...]

6 D-Link DCS-3010 User Manual Product Overview Introduction DCS-3010 is a HD, full frame rate network camera with H.264 compression. The DCS-3010 connects to a network to provide high- quality live video over the Internet. With the vivid video quality and superb high resolution, it can provide most detail of the video which is useful to identify an[...]

7 D-Link DCS-3010 User Manual Product Overview Features HD Surveillance DCS-3010 provides HD industral standard 16:9 wide screen video for IP surveillance. With the xed lens, it is a high performance high quality network camera. To utilize the advantage of high resolution, the "viewing window" design can provide user a exible settin[...]

8 D-Link DCS-3010 User Manual Product Overview Hardware Overview Front Panel Lens Connector Connect to a CS mount Built-in MIC Internal microphone[...]

9 D-Link DCS-3010 User Manual Product Overview Rear Panel Ethernet (PoE) RJ-45 connector for Ethernet which can also be used to power the camera using PoE Microphone Port Use to Connect an External microphone Reset Press and hold this button for 10 seconds to reset the camera Speaker Port Use to Connect an External speaker DC Power 12V DC LED Power[...]

10 D-Link DCS-3010 User Manual Product Overview Side Panel Side Panel Micro SD Card Slot Local Micro SD card for storing recorded images and video[...]

11 D-Link DCS-3010 User Manual Product Overview Button Panel DC-Iris Connector Connector for DC auto iris lens[...]

12 D-Link DCS-3010 User Manual Installation Installation Hardware Installation Basic Connection (without PoE) Connect the camera to your switch or router via Ethernet cable. Connect the supplied power cable from the camera to a power outlet. Connection Using a PoE Switch If using a PoE switch or router, connect the network camera via Ethernet cable[...]

13 D-Link DCS-3010 User Manual Installation Conguration with Wizard Click Setup Wizard to begin the installation. Insert the DCS-3010 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run . Type D: au[...]

14 D-Link DCS-3010 User Manual Installation Click Yes to accept the License Agreement. To start the installation process, click Next . Note: The installation may take several minutes to nish.[...]

15 D-Link DCS-3010 User Manual Installation Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE[...]

16 D-Link DCS-3010 User Manual Installation Enter the Admin ID and password. When logging in for the rst time, the default Admin ID is admin with the password left blank. Click Next , to proceed to the next page. The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, [...]

17 D-Link DCS-3010 User Manual Installation Take a moment to conrm your settings and click Restart . Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started. Click Next , to proceed to the next page.[...]

18 D-Link DCS-3010 User Manual Installation Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Viewing Camera via Web Browser Select the camera and click the button labeled " Link " to access the web conguration. The Setup Wizard will automatically open your web [...]

19 D-Link DCS-3010 User Manual Installation This section shows your camera’s live video. You can select your video prole and view or operate the camera. For additional information about web conguration, please refer to the user manual included on the CD-ROM or the D-Link website. Enter admin as the default username and leave the password bl[...]

20 D-Link DCS-3010 User Manual Installation D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to congure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance. Insert the CD-ROM into the CD-ROM [...]

21 D-Link DCS-3010 User Manual Installation Click Finish to complete the installation. To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console . For more information about D-ViewCam, please refer to the documentation on the D-ViewCam CD-ROM.[...]

22 D-Link DCS-3010 User Manual Conguration Conguration Live Video When you connect to the camera's web interface you will see the following page. This is the Live Video page which will allow you to view the camera's video feed and control basic camera functions using the icons on the screen. Please refer to the tables on the followi[...]

23 D-Link DCS-3010 User Manual Conguration D-Link Logo Securicam Logo Click this logo to visit the D-Link website. The logos and website can be customized to t your needs. For more information, please refer to User Customization on page 68. Client Settings Setup the stream transmission mode and saving options on the local computer. Language S[...]

24 D-Link DCS-3010 User Manual Conguration ePT Direction This camera supports digital pan/tilt/zoom (ePTZ) control. Please refer to PTZ Control for details information. Home: Move the camera to the preset home position. Direction: Control the camera’s pan or tilt directions (up/down/left/ right). Zoom Zoom in/out to magnify or shrink the digit[...]

25 D-Link DCS-3010 User Manual Conguration Camera Control Snapshot Click this button to capture and save still images. The captured images will be displayed in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP (*.bmp) format. Recording Click this button to record video clips to your computer. Whe[...]

26 D-Link DCS-3010 User Manual Conguration Client Setup Clicking the Client Settings button will bring you to the following screen which allows you to congure the basic protocol options for you camera. H.264/MPEG4 Media Options Video and Audio can be viewed at the same time or seperately. Recording Options Folder: Select the folder where you [...]

27 D-Link DCS-3010 User Manual Conguration Click the setup button to enter the setup screen. Click on the basic button to enter the setup screen. Please click the [+] next to each folder to view the options. Basic setup includes the following options: System Overview Audio and Video - Video Settings, Audio Settings Network - IP Settings Event Ma[...]

28 D-Link DCS-3010 User Manual Conguration Advanced Setup Click the setup button to enter the setup screen. Click on the advanced button to enter the setup screen. Please click the [+] next to each folder to view the options. Advanced setup includes the following options: System Overview Audio and Video - Video Settings, Image Settings, Audio Se[...]

29 D-Link DCS-3010 User Manual Conguration System Overview The system overview page contains a summary of the camera's current settings. For more information about adjusting these settings, please consult the subsequent instructions found in this manual.[...]

30 D-Link DCS-3010 User Manual Conguration Video Options Viewing Window: The camera supports multiple streams with frame size ranging from 176x144 to 1280x800. Click Viewing Window to open the viewing region setting page. On this page, you can set the Region of Interest (ROI) and the Output Frame Size for stream 1~3. Please follow the steps belo[...]

31 D-Link DCS-3010 User Manual Conguration Once nished with the setting in the Viewing Window, click Save to enable the settings and click Close to exit the window. The selected Output Frame Size will immediately be applied to the Frame size of video stream. You can then go back to the Live Video to test the new settings. Sensor Setting: Clic[...]

32 D-Link DCS-3010 User Manual Conguration Video Quality Setting for Stream 1~4 Compression Type: The compression level affects the amount of bandwidth and storage required. Lower compression uses more bandwidth and storage but delivers better image quality. Of the three options, H.264 consumes much less network bandwidth compared to MPEG4 and J[...]

33 D-Link DCS-3010 User Manual Conguration Image Settings This page allows you to tune the white balance, brightness, saturation, contrast, and sharpness settings for the video. Color: Select either a Color or B/W (black and white, monochrome) video display. Power Line Frequency: Select either 50 or 60 Hz depending on your region. Iris mode: [...]

34 D-Link DCS-3010 User Manual Conguration 4. Click Save to enable the new setting. Brightness: Adjust the image brightness level, which ranges from -5 to +5 Saturation: Adjust the image saturation level, which ranges from -5 to +5 Contrast: Adjust the image contrast level, which ranges from -5 to +5 Sharpness: Adjust the image sharpness level, [...]

35 D-Link DCS-3010 User Manual Conguration Audio Settings Mute: Select to mute audio. Microphone input gain: It is necessary to nd the optimum gain between -15dB to +15dB that transmits the best audio for listening. Audio type: Advanced Audio Coding (AAC) is a wide band audio coding algorithm that exploits two primary coding strategies to dra[...]

36 D-Link DCS-3010 User Manual Conguration Network IPv4 LAN: Select this option when the camera is deployed on a local area network (LAN) and is intended to be accessed by local computers. The default setting for the Network Type is LAN. Remember to click Save when you complete the Network setting. • Get IP address automatically (DHCP): Select[...]

37 D-Link DCS-3010 User Manual Conguration Secondary WINS Server: The secondary WINS server that maintains the database of computer name and IP address. • Enable UPnP Presentation: Select this option to enable UPnP presentation for the camera so that whenever a camera is presented to the LAN, shortcuts of connected cameras will be listed in My[...]

38 D-Link DCS-3010 User Manual Conguration 4. Go to Setup > Network > IP settings . Select PPPoE and enter the user name and password provided by your ISP. Click Save to enable the setting. 5. The camera will reboot. 6. Disconnect the power to the camera. Remove it from the LAN environment.[...]

39 D-Link DCS-3010 User Manual Conguration Port and Access Name Settings HTTPS By default, the HTTPS port is set to 443. It can also be assigned to another port number between 1025 and 65535. Note: JPEG only transmits a series of JPEG images to the client. In order to utilize this audio feature, make sure the video mode is set to H.264 or MPEG-4[...]

40 D-Link DCS-3010 User Manual Conguration Access name for stream 1 ~ 4: This Network Camera supports multiple streams simultaneously. The access name is used to differentiate the streaming source. When using Mozilla Firefox or Netscape to access the Network Camera and the video mode is set to JPEG, users will receive video comprised of continuo[...]

41 D-Link DCS-3010 User Manual Conguration Access name for stream 1 ~ 4: This Network Camera supports multiple streams simultaneously. The access name is used to differentiate the streaming source. If you want to use an RTSP player to access the Network Camera, you have to set the video mode to H.264 / MPEG-4 and use the following RTSP URL comma[...]

42 D-Link DCS-3010 User Manual Conguration Dynamic DNS This section explains how to congure the dynamic domain name service for the camera. DDNS is a service that allows your camera, especially when assigned with a dynamic IP address, to have a xed host and domain name. Enable DDNS: Select this option to enable the DDNS setting. Server Nam[...]

43 D-Link DCS-3010 User Manual Conguration HTTPS This section explains how to enable authentication and encrypted communication over SSL (Secure Socket Layer). It helps protect streaming data transmission over the Internet on higher security level. Enable HTTPS Select this item to enable HTTPS communication, then select a connection option: &quo[...]

44 D-Link DCS-3010 User Manual Conguration Create Certicate Request and Install Select this option to create a certicate from a certicate authority. 1. Click Create to open the Create Certicate page, then click Save to generate the certicate. 2. If you see the information bar, click OK and click on the Information bar at the top o[...]

45 D-Link DCS-3010 User Manual Conguration Access List This section explains how to control access permissions by verifying the connecting client PC’s IP address. General Settings Maximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10 clients (including stream 1 ~ stream 5). The default value is 10.[...]

46 D-Link DCS-3010 User Manual Conguration • Refresh: Click this button to refresh all current connections. • Add to deny list: You can select entries from the Connection Status list and add them to the Deny List to deny access. Please note that the selected connections will only be disconnected temporarily and will automatically try to re-l[...]

47 D-Link DCS-3010 User Manual Conguration Advanced Settings SNMP conguration This section explains how to use the SNMP on the network camera. The Simple Network Management Protocol is an application layer protocol that facilitates the exchange of management information between network devices. It helps network administrators to remotely mana[...]

48 D-Link DCS-3010 User Manual Conguration IEEE 802.1x Enable this function if your network environment uses IEEE 802.1x which is a port-based network access control. The network devices, intermediary switch/access point/hub, and RADIUS server must support and enable 802.1x setting. The 802.1x standard is designed to enhance the security of loca[...]

49 D-Link DCS-3010 User Manual Conguration The following are the main benets of a QoS-aware network: The ability to prioritize trafc and guarantee a certain level of performance to the data ow. The ability to control the amount of bandwidth each application may use, and thus provide higher reliability and stability on the network. Requi[...]

50 D-Link DCS-3010 User Manual Conguration QoS/DSCP DSCP-ECN denes QoS at Layer 3 (Network Layer). The Differentiated Services (DiffServ) model is based on packet marking and router queuing disciplines. The marking is done by adding a eld to the IP header, called the DSCP (Differentiated Services Code Point). This is a 6-bit eld that pr[...]

51 D-Link DCS-3010 User Manual Conguration Motion can be detected by measuring change in speed or vector of an object or objects in the eld of view. Enable Motion Detection: Select this option to turn on the motion detection feature. Window Name: Create your own name for the monitored area/ window. It will show at the top of the motion window[...]

52 D-Link DCS-3010 User Manual Conguration Tamper Detection With tamper detection, the camera is capable of detecting incidents such as redirection, blocking or de-focusing, or even spray paint. To enable tamper detection, follow the steps given below: 1. Select Enable camera tampering detection . 2. Enter the tamper trigger duration (10 sec. ~ [...]

53 D-Link DCS-3010 User Manual Conguration Event Settings This section explains how to congure the camera to respond to particular situations (event). A typical application is that when a motion is detected, the camera sends buffered images to an FTP server or e-mail address as notications. Sever Settings Click Add Server on Event Settings[...]

54 D-Link DCS-3010 User Manual Conguration FTP: Select to send the media les to an FTP server when a trigger is activated. • Server address: Enter the domain name or IP address of the FTP server. • Server port: By default, the FTP server port is set to 21. It can also be assigned to another port number between 1025 and 65535. • User nam[...]

55 D-Link DCS-3010 User Manual Conguration Media Settings Click Add Media to open the Media Settings page. On this page, you can specify the type of media that will be sent when a trigger is activated. A total of 5 media settings can be congured. Media name: Enter a name for the media setting. Media Type: There are three choices of media type[...]

56 D-Link DCS-3010 User Manual Conguration Video clip: Select to send video clips when a trigger is activated. Source: Select a source of video clip. Pre-event recording: The camera has a buffer area. It temporarily holds data up to a certain limit. Enter a number to decide the duration of recording before a trigger is activated. Up to 9 seconds[...]

57 D-Link DCS-3010 User Manual Conguration Event Settings In the Event Settings column, click Add to open the Event Settings page. On this page, you can arrange three elements -- Trigger, Schedule, and Action to set an event. A total of 3 event settings can be congured. Event name: Enter a name for the event. Enable this event: Select to acti[...]

58 D-Link DCS-3010 User Manual Conguration Trigger This is the cause or stimulus which denes when to trigger the camera. The trigger source can be congured to use the camera’s built-in motion detection mechanism. There are several choices of trigger sources as shown below. Select the item to display the detailed conguration options. T[...]

59 D-Link DCS-3010 User Manual Conguration Action Dene the actions to be performed by the camera when a trigger is activated. To set an event with recorded video or snapshots, it is necessary to congure the server and media setting so that the camera will know what action to take (i.e. the server to send the media les to) when a trigger[...]

60 D-Link DCS-3010 User Manual Conguration Click Add to open the recording setting page. In this page, you can dene the recording source, recording schedule, and recording capacity. A total of 2 recording setting can be congured. Recording name: Enter a name for the recording setting Enable this recording: Select this option to enable vide[...]

61 D-Link DCS-3010 User Manual Conguration Enable cyclic recording: If you select this item, when the maximum capacity is reached, the oldest le will be overwritten by the latest one. The reserved amount is reserved for cyclic recording to prevent malfunction. This value must be larger than 15 Mbytes. If you want to enable recording notica[...]

62 D-Link DCS-3010 User Manual Conguration Local Storage This section explains how to manage the local storage on the Network Camera. Here you can view SD card status, search for recorded les to playback, download, etc. SD Card Management SD card status: This column shows the status and reserved space of your SD card. Please remember to forma[...]

63 D-Link DCS-3010 User Manual Conguration Digital PTZ You can set a total of 20 preset positions and select preset positions for the camera to patrol. Please follow the steps below to preset a position: 1. Adjust the shooting area to the desired position using the buttons on the right side of the window. 2. Enter a name for the preset position,[...]

64 D-Link DCS-3010 User Manual Conguration User Settings This section explains how to enable password protection and create multiple accounts. Admin Password Setup: The administrator account name is “admin”, which is permanent and cannot be deleted. The default of password is empty. Add user account: Add a new user account. Username: Enter a[...]

65 D-Link DCS-3010 User Manual Conguration Device Settings Turn off the LED indicator: Select this option to turn off the LED next to the lens. This will prevent anyone from observing the operation of the network camera. Camera Name: Create a unique name for your camera.[...]

66 D-Link DCS-3010 User Manual Conguration Time and Date Automatically or manually congure, update, and maintain the internal system clock for your camera. Current Server Time: Displays camera's current time. Time Zone: Select your time zone from the drop-down menu. Daylight saving time: At some area, the clocks are adjusted one hour for[...]

67 D-Link DCS-3010 User Manual Conguration Maintenance This chapter explains how to restore the camera to factory default, upgrade rmware version, etc. Reboot: This feature allows you to reboot the camera, which takes about one minute to complete. When completed, the live video page will be displayed in your browser. The following message wil[...]

68 D-Link DCS-3010 User Manual Conguration Upload custom language le: Click Browse… and specify your own custom language le to upload. Export setting backup le: Click to export all parameters for the device and user-dened scripts. Upload setting backup le: Click Browse… to upload a setting backup le. Please note that the mo[...]

69 D-Link DCS-3010 User Manual Conguration Parameter List The Parameters List page lists the entire system’s parameters in alphabetical order. If you need technical assistance, please provide the information listed on this page.[...]

70 D-Link DCS-3010 User Manual Conguration Logs This section explains how to congure the camera to send the system log to the remote server as backup. Remote Log: You can congure the camera to send the system log le to a remote server as a log backup. Before utilizing this feature, it is suggested that the a log-recording tool be rst[...]

71 D-Link DCS-3010 User Manual Appendix A - Technical Specications Technical Specications Appendix A - Technical Specications Camera Hardware Profile  1/4” 1 Megapixel CMOS sensor  256 Mbytes SDRAM  32 Mbytes of flash memory  4mm fixed lens  Aperture F1.5  Angle of view  56.9° (H)  35.9° (V) Image Features ?[...]

72 D-Link DCS-3010 User Manual Appendix A - Technical Specications System Management System Requirements for W eb Interface  Browser: Internet Explorer , Firefox, Chrome Event Management  Motion detection  Event notification and uploading of snapshots/video clips via e-mail or FTP  Supports multiple SMTP and FTP servers  Multiple[...]