D-Link DSL-514 manual

DSL-514 ADSL Router User ’s Guide i DSL-514 ADSL Router User’s Guide (First Edition September 2003)[...]

DSL-514 ADSL Router User ’s Guide i FCC W arning This equipment has been teste d and f ound to comply with the lim its for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are d esigned to provide reasonable protection agains t harmful interfer ence in a residential installation. Th is equipment generates, uses a nd ca[...]

DSL-514 ADSL Router User ’s Guide ii T ABLE OF CONTENTS About This User ’ s Guide ......................................................................................... V Guide Overview ................................................................................................................ .............................. v Before Y ou[...]

DSL-514 ADSL Router User ’s Guide iii W indows 2000 fo r DHC P ......................................................................................................... ............ 10 W indows ME for DHC P ........................................................................................................... ............ 13 W indows 98SE for[...]

DSL-514 ADSL Router User ’s Guide iv Log ........................................................................................................................... .............................. 70 T raf fic ....................................................................................................................... ...................[...]

DSL-514 ADSL Router User ’s Guide v About This User ’ s Guide This user ’s guide provides instructions on how to in stall the DSL-51 4 ADSL Rout er and use it to connect a computer or Ethernet LAN to the Internet. If you are using a computer with a functioning Ethernet port, you can us e the Quick Installation Guide to quickly establish your [...]

DSL-514 ADSL Router User ’s Guide vi Before Y ou Start Please read and make sure you understa nd all the prerequisites for proper installation of your new Router . Have all the necessary information and equipment on hand before beginni ng the installation. Installation Overview The procedure to install the Router can be descr ibed in general term[...]

DSL-514 ADSL Router User ’s Guide vii Ethernet Port (NIC Adapter) Any computer that uses the Router must be able to connect to it th rough the Ethernet por t on the Router . This connection is an Ethernet connecti on and therefore requires that your computer be equipped with an Ethernet port as well. Most notebook computers are now sold with an E[...]

DSL-514 ADSL Router User ’s Guide viii Unpacking Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascertain that you have: 1. One DSL-514 ADSL Router 2. One CD-ROM with this User’s Gu ide and the Quick Installation Guide 3. One twisted-pair telephone cable used for ADSL connection 4. One CAT-5 Ethe[...]

DSL-514 ADSL Router User ’s Guide 1 Chapter 1 - Introduction ADSL router technology is a relative ly new technology a nd may be unfamiliar to the reader. In this section, we introduce you to ADSL technolog y and give a brie f description of its key attributes. We also give a general description of the D-Link DSL-514 ADSL Router and its main featu[...]

DSL-514 ADSL Router User ’s Guide 2 Product Features The D-Link DSL-514 ADSL Router provides the following features: • Data rates up to 8 Mbps for downstream and 1M bps for upstream • F riendly w eb-based graphical user inte rface for configur ation and management • Supports up to eight simultaneous virtual connections for a single ADSL acc[...]

DSL-514 ADSL Router User ’s Guide 3 Rear Panel All cable connections to the Router ar e made at the rear panel. T he factory-reset button is located here as well. A DSL port Connect A DSL cable here Pow er cord Connect here Factory Reset button Ethernet port Connect Ethernet cable here Phone port Connect T elephone cable here[...]

DSL-514 ADSL Router User ’s Guide 4 Chapter 2 - Hardware Installation In this chapter you will learn abo ut the various co nnections you will need to make in order to use the Router . When selecting the locatio n for the Router , al low ample room to access th e connections on the rear pane l. For convenience, try to place the Router near your co[...]

DSL-514 ADSL Router User ’s Guide 5 Connect Ethernet LAN to Router The Router may be connected to an y 10/100BASE-TX Ethernet LAN. Any connection to an Ethernet concentrating device such as a s witch or hub must operate at a speed of 10/100 Mbps on ly . Whe n connecting the Router to any Ether net device that is c apabl e of operating at s peeds [...]

DSL-514 ADSL Router User ’s Guide 6 Chapter 3 - Configuring the Router for the First Time The first time you setup the Router it is rec omm ended that you configure t he WAN connection usin g a single computer making sure t hat both the computer and the Router are not connected to the LAN. Once the WAN connection is functioning properly yo u may [...]

DSL-514 ADSL Router User ’s Guide 7 Windows XP for DHCP 1. In the Windows task bar, click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network Connections icon.[...]

DSL-514 ADSL Router User ’s Guide 8 3. In the LAN or High-Speed Internet window, right -click on icon correspon ding to your network interface card (NIC) and select Properties . (This icon may be labeled Local Area Connection ) 4. In the General tab of the Local Area Connection Properties menu. Highlight Internet Protocol (TCP/IP) under “This c[...]

DSL-514 ADSL Router User ’s Guide 9 5. Select “ Obtain an IP address automatic ally ” by clicking once in the circle. Click OK to confirm and save your changes, and then close the Control Panel. 6. The Local Area Connection Properties window appears. Click OK button. Your computer is now ready to use the ADSL Router DHCP server.[...]

DSL-514 ADSL Router User ’s Guide 10 Windows 2000 for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network and Dial-up Connections icon.[...]

DSL-514 ADSL Router User ’s Guide 11 3. In the Network and Dial-up Connections windo w , right-click the Local Area Connection icon, and then select Properties . 4. In the Local Area Connection Prop erties dialog box, select Internet Protocol (TCP/IP) , and then click Properties .[...]

DSL-514 ADSL Router User ’s Guide 12 5. Select “ Obtain an IP address automatic ally ” by clicking once in the circle. Click OK to confirm and save your changes, and then close the Control Panel. 6. The General tab will again appear. Click OK button. Your computer is now ready to use the ADSL Router DHCP server.[...]

DSL-514 ADSL Router User ’s Guide 13 Windows ME for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-514 ADSL Router User ’s Guide 14 3. In the Network windows appe ars. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our netwo rk card/adapter. and then click Properties . 4. In the TCP/IP Properties windows appear, then choose the IP Address tab, click the Obtain and IP automatically option. Click OK[...]

DSL-514 ADSL Router User ’s Guide 15 5. The Netw ork window again appears, click OK button. Your computer is now ready to use the ADSL Router DHCP server.[...]

DSL-514 ADSL Router User ’s Guide 16 Windows 98SE for DHCP 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-514 ADSL Router User ’s Guide 17 3. In the Network windows appe ars. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our netwo rk card/adapter and then click Properties . 4. In the TCP/IP Properties windows appear, then choose the IP Address tab, click the Obtain and IP automatically option. Click OK [...]

DSL-514 ADSL Router User ’s Guide 18 5. The Netw ork window again appears, click OK button. 6. The System Settings Change window appears. You need to restart you r computer for the changes to go into effect. Click Yes .[...]

DSL-514 ADSL Router User ’s Guide 19 Access the Web Configuration Manager Once the computer has IP settings that allow it to access the web-based configur ation software, you can change the settings to enable the Router to connect to the Internet. If the browser software on the computer yo u are usin g is configured to use a pr oxy server for Int[...]

DSL-514 ADSL Router User ’s Guide 20 Using the Configuration Wizard 1. Once you have logged in, the Home screen w ill appear. Click Run Wizard button. 2. The Setup Wizard screen will appe ar. Follow the Wizard step by step to quickly configur e the DSL-514. Click Next button. Check your IP supplier information. If you are unsure of which setting [...]

DSL-514 ADSL Router User ’s Guide 21 3. Set up your new password. It is recommend ed that you change the 514a dmin password for security purposes. Enter in your new p assword. Enter it in a second time for verification. Click the Next button.[...]

DSL-514 ADSL Router User ’s Guide 22 4. There will be four options to select from. Please sele ct the appropriate opt ion that is used by your ISP. Dynamic IP Address: Select this option to manually input the IP address that your ISP assigned to you. Please see Dynamic IP A ddress section. Static IP Address: Select this option to manuall y input [...]

DSL-514 ADSL Router User ’s Guide 23 Dynamic IP A ddress If your selected Dynamic IP A ddress , you will see the foll owing page. You will need t o enter in VPI , VCI and select your connection type. The informa tion provided to y ou by y our ISP. Click Next button. Static IP A ddress If your selected Static IP Address , you will see the followin[...]

DSL-514 ADSL Router User ’s Guide 24 PPPoE/PPPoA If your selected PPPoE/PPPoA , you will see the follo wing page. Enter in the Use Name , Password , VPI , VCI and select your connection type provided to y ou by your ISP. Click Next button. Bridge Mode If your selected Bridge Mode , you will see the following page. You will need to enter in VPI , [...]

DSL-514 ADSL Router User ’s Guide 25 5. At this point, the Setup Wizard has co mpleted. Click Restart to save the settings and r eboot the DSL-514. 6. The DSL-514 will save the changes an d reboot. Click Close button to close out the Setup Wizard screen. Y ou setup of the DSL-514 is now complete. Y ou should be able to access the Internet.[...]

DSL-514 ADSL Router User ’s Guide 26 Using Wizard After Configuring IP Setting Your Computer If you connection type as Dynamic IP Address, Static IP Address and PPPoE/PPPoA , Don’t care configuring IP setting on you Computer. Your computer is used the ADSL Router DHCP server. If you connection type as Bridge Mode , Please follow ing settings st[...]

DSL-514 ADSL Router User ’s Guide 27 3. In the LAN or High-Speed Internet window, right -click on icon correspon ding to your network interface card (NIC) and select Properties . (This icon may be labeled Local Area Connection ) 4. In the General tab of the Local Area Connection Properties menu. Highlight Internet Protocol (TCP/IP) under “This [...]

DSL-514 ADSL Router User ’s Guide 28 5. The Internet Protocol (TCP/IP) Properties window appears. Under the General tab, select Use the following IP address: , enter the IP add ress , Subnet Mask , and Default Gateway given to you by your ISP or ADSL service provider, then select Use the follow ing DNS server addresses: , enter the DNS settings g[...]

DSL-514 ADSL Router User ’s Guide 29 Windows 2000 IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections windo w , right-click the Local Area Connection icon, and then sele[...]

DSL-514 ADSL Router User ’s Guide 30 4. In the Local Area Connection Prop erties dialog box, select Internet Protocol (TCP/IP) , and then click Properties . 5. The Internet Protocol (TCP/IP) w indow appears. Under the General tab, select Use the follow ing IP address . Enter the IP address , Subnet Mask , and Default Gate way given to you by your[...]

DSL-514 ADSL Router User ’s Guide 31 6. The General tab will again appear. Click OK button. 7. The Local Netw ork window appears. Y ou n eed to restart your computer for the chang es to go into effect. Click Ye s . If you access the ADSL Router web configuration manage, please follow Chapter 3 - Configuring IP Settings on Y our Computer setting s[...]

DSL-514 ADSL Router User ’s Guide 32 Windows ME IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-514 ADSL Router User ’s Guide 33 3. In the Network windows appe ars. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our network card/adapter. And then click Properties . 4. The TCP/IP Properties window appears. Select the IP Address tab and then select the Select an IP address option. Enter the IP Ad[...]

DSL-514 ADSL Router User ’s Guide 34 5. Select Gateway tab and enter the IP settings in the Ne w ga t e wa y field. Click Add . 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field.[...]

DSL-514 ADSL Router User ’s Guide 35 9. Enter the DNS settings in t he DNS Server Order field and click Ad d . If you have more than one DNS IP address, repeat this step. You c an have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK .[...]

DSL-514 ADSL Router User ’s Guide 36 11. The Netw ork window again appears, click OK button. 14. The System Settings Change window appears. You need to restar t your computer for the changes to go into effect. Click Yes . If you access the ADSL Router web configuration manage, please follow Chapter 3 - Configuring IP Settings on Y our Computer se[...]

DSL-514 ADSL Router User ’s Guide 37 Windows 98SE IP Setting for Bridge Mode 1. In the Windows task bar , click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network icon.[...]

DSL-514 ADSL Router User ’s Guide 38 3. In the Network windows appe ars. Select the Configuration tab, select TCP/IP protocol line that has been associated with y our netwo rk card/adapter and then click Properties . 4. The TCP/IP Properties window appears. Select the IP Address tab and then select the Select an IP address option. Enter the IP Ad[...]

DSL-514 ADSL Router User ’s Guide 39 5. Select Gateway tab and enter the IP settings in the Ne w ga t e wa y field. Click Add . 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field.[...]

DSL-514 ADSL Router User ’s Guide 40 9. Enter the DNS settings in t he DNS Server Order field and click Ad d . If you have more than one DNS IP address, repeat this step. You c an have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK .[...]

DSL-514 ADSL Router User ’s Guide 41 11. The Netw ork window again appears, click OK button. 12. The System Settings Cha nge window appears. You need to restart your computer for the changes to go into effect. Click Yes . If you access the ADSL Router web configuration manage, please follow Chapter 3 - Configuring IP Settings on Y our Computer se[...]

DSL-514 ADSL Router User ’s Guide 42 Chapter 4 – Web-based Configuration This chapter describes ho w to use the embedded web-bas ed management software to configure the Router for additional PVC c onnection profiles, to change the LAN IP address, to change the globa l WAN IP address and to perform other management functions. Home Wizard The Set[...]

DSL-514 ADSL Router User ’s Guide 43 WAN WAN is short for Wide Area Network. The WAN settings can be referre d to as the Public settings. All IP information in the WAN settings is public IP addresses w hich are accessible on the Internet. The WAN settings consist of four opti ons: Dynamic IP Address, Static IP A ddress, PPPoE/PPPo A an d Bridge M[...]

DSL-514 ADSL Router User ’s Guide 44 Home ＞ WA N ＞ Static IP A ddress Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the VPI, VCI, IP Address, Subnet Mask, ISP Gateway Address, DNS Address and select connection type provided to you by your ISP. Each IP address ent ered in the field[...]

DSL-514 ADSL Router User ’s Guide 45 Home ＞ WA N ＞ PPPoE/PPPoA Choose PPPoE/PPPoA if you’re ISP uses PPPoE/PPPoA connection. Your ISP will provide you with a username, password, VPI, VCI and select connection ty pe. This option is typically used for DSL service. User Name: Your PPPoE/PPPoA user name provided by y our ISP Passw ord: Your PPP[...]

DSL-514 ADSL Router User ’s Guide 46[...]

DSL-514 ADSL Router User ’s Guide 47 Home ＞ WA N ＞ Bridge Mode Choose Bridge Mode if all WAN IP information is provid ed to you by your ISP. You will need to enter in the VPI, VCI and select connection type provided to you by your ISP. VPI: If instructed to change this, type in t he VPI value for the initial connection. VCI: If instructed to [...]

DSL-514 ADSL Router User ’s Guide 48 LAN LAN is short for Local Area Network. This is consider ed your internal network. These are the IP settings of the LAN interface for the DSL- 514. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal net work and ca[...]

DSL-514 ADSL Router User ’s Guide 49 DHCP DHCP stands for Dynamic Host Control Prot ocol . The DSL-514 has a built -in DHCP server. The DHCP Server will automatically assign an IP a ddress to t he computers on the LAN/privat e net work. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “ Obtain an IP A ddress [...]

DSL-514 ADSL Router User ’s Guide 50 DNS The DNS Configuration page allows the user to set the configuration of DNS proxy . DNS proxy selection: (1) Disable DNS Proxy: The LAN port does not proc ess the DNS query message. (2) Use A uto Discovered DNS Serv ers Only: The DNS proxy w ill store the DNS server IP addresse s obtained from DHCP client o[...]

DSL-514 ADSL Router User ’s Guide 51 Advanced Virtual Server The DSL-514 can be configur ed as a virtual server so that remote users accessing Web or FT P services via the public IP address can be automatically r edirected to local servers in the LAN netw ork. The DSL-514 fire wall feature filter s out unrecognized packets to protect your LAN net[...]

DSL-514 ADSL Router User ’s Guide 52 Filters Filters are used to deny LAN computers from accessi ng the Internet. The Router can be setup to deny internal computers by their IP or MAC addresses. The DSL-514 can also block users from accessin g restricted web sites. Adv anced ＞ Filters ＞ Outbound Filters-Outbound: Use IP Outbound Filters to de[...]

DSL-514 ADSL Router User ’s Guide 53 Adv anced ＞ Filters ＞ Inbound Filters-Inboun d: Use IP Inbound Filters to deny WAN IP addresses from a ccessing the internal network. You can deny specific port numbers or all ports for the specific IP address. Source IP: IP address criteria for the source computer(s) from w hich the packet originates. Des[...]

DSL-514 ADSL Router User ’s Guide 54 Schedule This is the schedule of time when the IP Filter will be enabled. Schedule Name: defines the name of this time schedule . Schedule: drop down menus help you in configuring the st art and end days of the time interval in one option . If add new time schedule, it will increase Vir tu al Se r ver Configur[...]

DSL-514 ADSL Router User ’s Guide 55 Routing The Route Table p age displays routing table and allows th e user to manu ally enter the routing entry. T he routing table will display the routing status of Destination, Ne tmask, Gateway and Interface. The interface lo0 means the loop back interface; and ppp1 means the PPP interface. The Gateway is t[...]

DSL-514 ADSL Router User ’s Guide 56 DMZ If you have a client PC that ca nnot run Internet applic ations properly from behi nd the DSL-514, then yo u can set the client up to unrestricted Intern et access. It allows a computer to be exposed to the Internet. This feature is useful for gaming pur poses. Enter the IP address of the internal comput e[...]

DSL-514 ADSL Router User ’s Guide 57 Firewall Firewall Rules is an adva nce feature used to deny or all ow traffic from passing through the DSL-514. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the Router. DoS Protection: Use the following denial of service protec tion: (1)SYN DoS (2)ICMP[...]

DSL-514 ADSL Router User ’s Guide 58 RIP The RIP Configuration page allows the user to set t he configuration for the s yst em w ide configuration of RIP. The actual RIP conf iguration is in the Ad vanced Configuration. Adv anced ＞ RIP ＞ Basic Configuration Supplier Interval: This field allows the user to enter the Supp lier Interval timer in[...]

DSL-514 ADSL Router User ’s Guide 59 Adv anced ＞ RIP ＞ A dvanc ed Configuration Interface: This field allo ws the user to choose the Interface (PVCs, PPP Sessions and LAN), for the RIP to be configured. A ction: This field allows the user to Enable (Yes) or Disable (No) the specifi ed interface for RIP. Send: This field allows the user to sel[...]

DSL-514 ADSL Router User ’s Guide 60 PPP PPP is configured as a group of software settings associated wi th the ADSL port. Although the device has only one physi cal ADSL port, the Router can be d efined with more than o ne group of PPP settings. Each group of settings is called a PPP interface and is given a name, such as ppp-0, ppp-1 , etc. Adv[...]

DSL-514 ADSL Router User ’s Guide 61 Adv anced ＞ PPP ＞ PPP A ccount Configuration User Name: The name you use to log in to your ISP each time this PPP conne ction is established. Password: The password y ou use to log in to your ISP each time this PPP connection is established.[...]

DSL-514 ADSL Router User ’s Guide 62 ADSL The ADSL Configuration page allows the user to set the configuration for ADSL protocols. Trellis: This field allows the user to enable or disable the Trellis Code. By default, it is alw ays enabled. Handshake Protoco l: This field allows the user to select the ADSL handshake protocol. Wiring Selection: Th[...]

DSL-514 ADSL Router User ’s Guide 63 SNMP SNMP (Simple Network Management Protocol) is a wi dely used net work monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DSL-514.The DSL-514 supports SNMP v1. System Name: The name refer[...]

DSL-514 ADSL Router User ’s Guide 64 Tools Admin At this page, the DSL-514 admin is trator can change t he system pas sword. The defau lt value is 514admin , which has read/w rite access while. New Password : Type in the new passw ord. Confirm Passw ord: Type in the new passw ord a second time for confirmation. Time The system time is the time us[...]

DSL-514 ADSL Router User ’s Guide 65 System The current system settings can be saved as a file ont o the local hard drive. The saved file or any other saved setting file can be lo aded back on the ADSL Ro uter. To reload a system settings file, click on Browse to browse the local hard drive and locate t he system file to be used. You may also r e[...]

DSL-514 ADSL Router User ’s Guide 66 In order to keep pace with changes in ADSL standards and technology the DSL-514 allo ws you to easily update the embedded firmware. You may obtain the late st version of the DSL-514 firmware by logg ing onto the D-Link web site at www.dlink.com. If y ou are connected to the Internet, you can access the D-Link [...]

DSL-514 ADSL Router User ’s Guide 67 3. Choice the file (FIRMWARE.DLF). 4. Click Apply button.[...]

DSL-514 ADSL Router User ’s Guide 68 5. Power Off the ADSL Router about 30 seconds, then Pow er On. Misc. These are additional tools and feat ures of the ADSL Router. Ping Test: This useful diagnostic utility can be us ed to ch eck if a computer is on the In ternet. It sends ping packets and listens for replies from the specific host. Connections[...]

DSL-514 ADSL Router User ’s Guide 69 Diagnostic This useful diagnostic utility can be used to check if a computer is on the Internet. It sends ping packet s and listens for replies from the specific host.[...]

DSL-514 ADSL Router User ’s Guide 70 Status Device Info This page displays the current information for the ADSL Router. It will display the WAN, LAN, information. This page allows you to observe the DSL-514 w orking status: Log The ADSL Router keeps a running l og of events and activities occu rring on the ADSL Router. If the device is rebooted, [...]

DSL-514 ADSL Router User ’s Guide 71 Traffic The ADSL Router keeps a statistic of traffic that passes through it. You are able to view the amount of packets that passes through the ADSL Ro uter on both the WAN port and the LA N port. The traffic counter will reset if the device is rebooted.[...]

DSL-514 ADSL Router User ’s Guide 72 ATM The ATM Status page shows all the st atistics information of ATM cells. Tx Bytes: Total Good Bytes TX’s Rx Bytes: Total Good Bytes Received Tx Cells: Total Good Cells TX’s Rx Cells: Total Good Cells Received Rx HEC Errors: Number of cells received with failed checked Tx Mgmt Cell: Number of mgmt cells [...]

DSL-514 ADSL Router User ’s Guide 73 TCP The TCP Status page shows the st atistics for all TCP connections. Total Packets Sent; Data Packets Sent; Data Bytes Sent; Total Pa ckets Received; Packets Received in-sequence; Bytes Received in-sequenc e; Out of Or der Packets; Out of Order Bytes; Packets Disgarded for bad checksum; Packets Disgar ded fo[...]

DSL-514 ADSL Router User ’s Guide 74 ADSL Showtime Firmware Version: This field displays the D-Lin k ADSL data pump firmware version number. ADSL Line Status: This field displays the ADSL connection process and status. ADSL Modulation: This field displays the ADSL modul ation status for G.dmt or T1.413. ADSL Annex Mode: This field displays the AD[...]

DSL-514 ADSL Router User ’s Guide 75 Appendix A - Technical Specifications General Standards: ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) Protocol: RFC 1483 Multiprotocol Encapsulation over A T M Adaptation Layer 5 Data T ransfer Rate: G.dmt full rate downstream: up to 8Mbps G.dmt full rate upstream: up to 1 Mbps G.lite ADSL down[...]