Go to page of
Similar user manuals
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Dell 5324, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Dell 5324 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Dell 5324. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Dell 5324 should contain:
- informations concerning technical data of Dell 5324
- name of the manufacturer and a year of construction of the Dell 5324 item
- rules of operation, control and maintenance of the Dell 5324 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Dell 5324 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Dell 5324, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Dell service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Dell 5324.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Dell 5324 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
1 Dell TM PowerConnect TM 5324 Sy stems User’ s Guide Addendum[...]
-
Page 2
2 www .dell.com | support.dell.com Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer . NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, pe rsonal [...]
-
Page 3
3 New Features This document in an addendum to the P owerConnect 5324 user guide an d includes the following topics: • Configuring LLDP • Defining SNMP P arameters • HTTP/HT TPS Upload/Download • Defining STP Root Guard • Configuring Multiple Spanning T ree • Configuring QinQ • Configuring Load Balancing[...]
-
Page 4
4 www .dell.com | support.dell.com Configuring LLDP The Link Layer Discovery Protocol (LLDP) allows network managers to troubleshoot and enhance network management by discovering and maintaining networ k topologies over multi-vendor environments. LLDP discovers network neighbors by standardizing methods fo r network devices to advertise themselves [...]
-
Page 5
5 Updates Interval (5-32768) — Indicates that rate at which LLDP advertisement updates are sent. The possible field range is 5 - 32768 secon ds. The default value is 30 seconds. Hold T ime (2-10) — Indicates the amount of time that LLDP packets ar e held befor e the packets ar e dis- carded. The possible field range is 2 - 10 seconds. The field[...]
-
Page 6
6 www .dell.com | support.dell.com Defining LLDP Port Settings The LLDP P ort Settings page allows network administrators to def ine LLDP port settings, including the port number , the LLDP port number , and the type of port information advertised. The P ort Settings page contains fields for configuring LLDP . T o open the Po r t S e t t i n g s pa[...]
-
Page 7
7 Optional TL Vs — Contains a list of optional TL Vs advertis ed by the port. F or the complete list, see the Ava i la b le T L V s field. Available TL Vs — Contains a list of available TL Vs that can be advertised by the port. The possible field values are: P ort Description — Advertises the port description. System Name — Advertises the s[...]
-
Page 8
8 www .dell.com | support.dell.com Console(config)# interface ethernet g5 Console(config-if)# lldp enable[...]
-
Page 9
9 Viewing Advertised Information The LLDP Advertised Information page displays the information advertised by specific ports when advertising LLDP information. T o open the Advertised Information page, click Security → LLDP → Advertised Information in the tree view . Figure 1-4. Advertised Information Po r t — Displays the port number from whi[...]
-
Page 10
10 www .dell.com | support.dell.com Displaying the Advertised Information T able T o open the Advertised Information T able , click Security → LLDP → Advertised Information → Show All in the tree view . Figure 1-5. Advertised Information T able T able 1-3. LLDP Advertis ed Information CLI Commands CLI Command Description show lldp local ether[...]
-
Page 11
11 The following is an example of the CLI commands: Switch# show lldp local ethernet 1 Device ID: 0060.704C.73FF Port ID: 1 Capabilities: Bridge System Name: ts-7800-1 System description: Port description: Management address: 172.16.1.8 802.3 MAC/PHY Configuration/Status Auto-negotiation support: Supported Auto-negotiation status: Enabled Auto-nego[...]
-
Page 12
12 www .dell.com | support.dell.com Viewing the LLDP Neighbor Information The Neighbors Information page contains information received from neighboring device LLDP advertisements. T o open the Neighbor Information page, click Security → LLDP → Neighbors Information in the tree view . Figure 1-6. Neighbors Information Po r t — Displays the nei[...]
-
Page 13
13 Figure 1-7. Neighbors T able T able 1-4. LLDP Neighbor Information CLI Commands The following is an example of the CLI commands: Switch# show lldp neighbors CLI Command Description show lldp neighbors interface Displays information about neighboring devices discovered using Link Layer Discovery P rotocol (LLDP) Port Device ID Port ID Hold Time C[...]
-
Page 14
14 www .dell.com | support.dell.com Defining SNMP Parameters Simple Network Management P rotocol (SNMP) provides a method for managing network devices. Devices supporting SNMP run a lo cal softwar e (agent). The SNMP agents maintain a list of variables, which are used to manage the device. The variables ar e defined in the Management Information Ba[...]
-
Page 15
15 Local Engine ID (10 - 64 Hex Characters) — Indicates the local device en gine ID. The field value is a hexadecimal string. Each byte in he xadecimal character str ings is two he xadecimal digits. Each byte can be separated by a period or a colon. The Engine ID must be defined before SNMPv3 is enabled. F or stand-alone devices select a default [...]
-
Page 16
16 www .dell.com | support.dell.com snmp-server engine ID local { engineid- string | default } Indicates the local device engine ID. The field values is a hexadecimal string. Each byte in hexadecimal character strings is two he xadecimal digits. Each byte can be separated by a period or colon. The Engine ID must be defined before SNMPv3 is enabled.[...]
-
Page 17
17 The following is an example of the CLI commands: Defining SNMP View Settings SNMP Views provides access or blocks access to device featur es or feature aspects. F or e xample, a view can be defined which states that SNMP group A has read only (R/O) access to Multicast groups, while SNMP group B has read-write (R/W) access to Multicast groups. F [...]
-
Page 18
18 www .dell.com | support.dell.com T o open the SNMPv3 V iew Settings page, click System → SNMP → V iew Settings in the tree view . Figure 1-9. SNMPv3 View Settings V iew Name — Contains a list of user -defined views. The vi ew name can contain a maximum of 30 alphanumeric characters. The possible field values are: Default — Displays the d[...]
-
Page 19
19 Figure 1- 10. Add a View 3 Define the field. 4 Click Apply Changes . The SNMP View is added, and the device is updated. Displaying the View T able 1 Open the SNMPv3 V iew Settings page. 2 Click Show All . The Vi e w T a b l e page opens. Figure 1-11. View T able Defining SNMP Views Using CLI Commands The following table summarizes the equivalent[...]
-
Page 20
20 www .dell.com | support.dell.com The following is an example of CLI commands: show snmp views [ viewname ] Displays the configuration of views. Console (config)# snmp-server view user1 1 included Console (config)# end Console # show snmp views Name OID Tree Type ------------- -------- --------- -------- user1 iso included Default iso included De[...]
-
Page 21
21 Defining SNMP Access Control The Access Control Add Group page provides information for creating SNMP groups, and assigning SNMP access control privileges to SNMP groups . Groups allow network managers to assign access rights to specific device features, or featur es aspects. T o open the Access Control Group page, click System → SNMP → Acce[...]
-
Page 22
22 www .dell.com | support.dell.com Rea d — The management access is restricted to r ead-onl y , and changes cannot be made to the assigned SNMP view . Wr i t e — The management access is read-write and chan ges can be made to the assigned SNMP view . Notify — Sends traps for the assigned SNMP view . Defining SNMP Groups 1 Open the A ccess Co[...]
-
Page 23
23 Removing SNMP Groups 1 Open the Access Control Group page. 2 Click Show All . The Access T able opens. 3 Select an SNMP group . 4 Check the Rem ov e checkbox. 5 Click Apply Changes . The SNMP group is deleted, and the device is updated. Defining SNMP Access Control Using CLI Commands The following table summarizes the equivalent CL I commands fo[...]
-
Page 24
24 www .dell.com | support.dell.com Assigning SNMP User Security The SNMPv3 User Security Model (USM) page enables assigning system users to SNMP groups, as well as defining the user authentication method. T o open the SNMPv3 U ser Security Model (USM) page, click System → SNMP → U ser Security Model in the tree view . Figure 1-16. SNMPv3 User [...]
-
Page 25
25 None — No user authentication is used. P assword (0-32 Characters) — Modifies the user -defined passwor d for a group. P asswords can contain a maximum of 32 alphanumeric characters. Authentication Ke y (MD5-16; SHA-20 hexa chars) — Defines the HMAC-MD5-96 or HMA C-SHA-96 authentication level. The authentication and privacy keys ar e enter[...]
-
Page 26
26 www .dell.com | support.dell.com Figure 1-18. User S ecurity Model T able Deleting an User Security Model T able Entry 1 Open the SNMPv3 User Security Model (USM) page. 2 Click Show All. The User Security Model T able opens. 3 Select a User Security Model T able entry . 4 Check the Remove checkbox. 5 Click Apply Changes . The User Security Model[...]
-
Page 27
27 The following is an example of the CLI commands: Defining Communities Access rights are managed by defining communities in the Community T able . When the community names are changed, access rights are also changed. T o open the SNMP Communities page, click System → SNMP → Community in the tree view . Figure 1-19. SNMP Community SNMP Managem[...]
-
Page 28
28 www .dell.com | support.dell.com Rea d W ri t e — The management access is read-write, for al l MIBs e x cept the community table, for which there is no access. SNMP Admin — The management access is read-write fo r all MIBs, including the community table. Remove — Removes a community , when selected. Defining a New Community 1 Open the SNM[...]
-
Page 29
29 Figure 1-21. Community T able Deleting Communities 1 Open the SNMP Community page. 2 Click Show All. The Community T able opens. 3 Select a community from the Community T able. 4 Select the Rem ov e check box. 5 Click Apply Changes . The selected community entry is de leted, and the device is updated. Configuring Communities Using CLI Commands T[...]
-
Page 30
30 www .dell.com | support.dell.com The following is an example of the CLI commands: console(config)# snmp-s erver community pub lic_1 su 1.1.1.1 console(config)# snmp-s erver community pub lic_2 rw 2.2.2.2 console(config)# snmp-s erver community pub lic_3 ro 3.3.3.3 console(config)# snmp-server host 1.1.1.1 public_1 1 console(config)# snmp-server [...]
-
Page 31
31 Defining SNMPv3 Notification Filters The SNMPv3 Notification F ilter page permits filtering traps based on OI Ds. Each OID is linked to a device feature or a featur e aspect. The SNMPV3 - Notification F ilter page also allows net work managers to filter notifications. T o open the SNMPv3 Notification F ilter page, click System → SNMP → Notif[...]
-
Page 32
32 www .dell.com | support.dell.com Figure 1-23. Add Filter 3 Define the relevant fields. 4 Click Apply Changes . The new filter is added, and the device is updated. Displaying the Filter T able 1 Open the SNMPv3 Notification F ilter page. 2 Click S how All . The F ilter T able opens. Figure 1-24. Filter T able Removing a Filter 1 Open the SNMPv3 N[...]
-
Page 33
33 Configuring Notification Filters Using CLI Commands The following table summarizes equivalent CLI co mmands for defining fields displayed in the SNMPv3 - Notification F ilters page. The following is an example of CLI commands: Defining SNMP Notification Recipients The Notification Recipients page contains information for defining filt ers that d[...]
-
Page 34
34 www .dell.com | support.dell.com Figure 1-25. Notification Recipients Recipient IP — Indicates the IP address to whom the traps ar e sent. Notification T yp e — The notification sent. Th e possible field values are: T raps — T raps ar e sent. Informs — Informs are sent. SNMPv1,2 — SNMP versions 1 and 2 are enabled for the sele cted r e[...]
-
Page 35
35 UDP P ort (1-65535) — The UDP port used to send no tifications. The default is 162. F i lter Name — Includes or ex cludes SNMP filters. T imeout (1-300 ) — The amount of time (seconds) the device wa its before r esending informs. The default is 15 seconds. Retries (1-255) — The amount of times the device rese nds an inform r equest. The [...]
-
Page 36
36 www .dell.com | support.dell.com Figure 1-26. Notification Recipients T ables Deleting Notification Recipients 1 Open Notification Recipients page. 2 Click Show All . The Notification Recipients T ables page opens. 3 Select a notification recipient in either the SNMPV1,2 Notification Recipient or S NMPv3 Notification Recipient T ables. 4 Check t[...]
-
Page 37
37 The following is an example of the CLI commands: snmp-server v3-host {ip- address | hostname } username [ traps | informs ] { noauth | auth | priv } [ udp-port port ] [ filter filtername ] [ timeout seconds ] [ retries retries ] Creates or updates a notification r ecipient receiving notifications in SNMP version 3. show snmp Shows the current SN[...]
-
Page 38
38 www .dell.com | support.dell.com HTTP/HTTPS Upload/Download Downloading Files The F ile Download F rom Ser ver page contains fields for downloading system image and Configuration files from the TFTP server to the device or the HTTP/S server . T o open the Fi l e D o w n l o a d Fr o m S er v e r page, click System → F ile Management → F ile [...]
-
Page 39
39 Boot Code — Downloads the Boot file. Active Image Active Image — The Image file that is currently active. Active Image After Reset — The Image file that is active after the device is reset. NOTE: The image file overwrites th e non-active image. It is recommended to designate that the nonactive image will become the active image after reset[...]
-
Page 40
40 www .dell.com | support.dell.com Downloading Files Using CLI Commands The following table summarizes the equivalent CLI commands for setting fields displayed in the F ile Download F rom Server page. The following is an example of the CLI commands: T able 1-10. File Down load CLI Commands CLI Command Description copy source-url destination- url [[...]
-
Page 41
41 Uploading Files The F ile Upload to Server page contains fields for uploading the soft ware from the TFTP server to the device. The image file can also be uploaded from the F ile Upload to Server page. T o open the F ile Upload to Server page, click System → F ile Management → F ile Upload in the tree view . Figure 1-28. File Upload to Serve[...]
-
Page 42
42 www .dell.com | support.dell.com Destination F ile Name (1-160 Characters) — Indicates the Configuration file path to which the file is uploaded. T ransfer F ile Name — The software file to which the configuration is uploaded. The possible field values ar e: Running Configuration — Uploads the R unning Configuration file. Startup Configura[...]
-
Page 43
43 NOTE: Each "! " indicates that 10 packet s were successfully transferred. Copying Files F i les can be copied and deleted from the Copy F iles page. T o open the Copy F iles page, click System → Fi l e Management → Copy F iles in the tree view . Figure 1-29. Copy Files i Copy Configuration — When selected, copies either the R unn[...]
-
Page 44
44 www .dell.com | support.dell.com Restoring Company Factory Default Settings 1 Open the Copy F iles page. 2 Click Restore Company F actory Defaults . 3 Click Apply Changes . The company factory default settings are r estored, and the device is updated. Copying and Deleting Files Using CLI Commands The following table summarizes the equivalent C L[...]
-
Page 45
45 Defining STP Root Guard Defining STP Global Settings The Spanning T ree Global Settings page contains parameters for enabling STP on the device. T o open the Spanning T ree Global Settings page, click Switch → Spanning T ree → Global Settings in the tree view . Figure 1-30. Spanning T ree Global Settings The Spanning T ree Global Settings pa[...]
-
Page 46
46 www .dell.com | support.dell.com The default path costs assigned to an interf ace vary according to the selected method: BPDU Handling — Determines how BPDU packets ar e managed wh en STP is disabled on the port/ device. BPDUs are used to transmit spanning tr ee in formation. The possible field values are: F iltering — F i lters BPDU packets[...]
-
Page 47
47 Defining STP Global Parameters 1 Open the page. 2 Select Enable in the Spanning T ree State field. 3 Select the STP mode in the STP Operation Mode field, and define the bridge settings. 4 Click Apply Changes . STP is enabled on the device. Modifying STP Global Parameters 1 Open the page. 2 Define the fields in the dialog. 3 Click Apply Changes .[...]
-
Page 48
48 www .dell.com | support.dell.com show spanning-tree [ ethernet interface | port-channel port- channel-number ] [ instance instance-id ] Displays spanning tree configuration. show spanning-tree [ detail ] [ active | blockedports ] [ instance instance-id ] Displays detailed spanning tree information on active or blocked ports. show spanning-tree m[...]
-
Page 49
49 The following is an example of the CLI commands: console(config)# spanning-tree console(config)# spanning-tree mode rstp console(config)# spanning-tree priority 12288 console(config)# spanning-tree hello-time 5 console(config)# spanning-tree max-age 12 console(config)# spanning-tree forward-time 25 console(config)# exit console# show spanning-tr[...]
-
Page 50
50 www .dell.com | support.dell.com 1/e6 enabled 128.6 100 DSBL Dsbl No P2p Intr 1/e7 enabled 128.7 100 DSBL Dsbl No P2p Intr 1/e8 enabled 128.8 100 DSBL Dsbl No P2p Intr 1/e9 enabled 128.9 100 DSBL Dsbl No P2p Intr 1/e10 enabled 128.10 100 DSBL Dsbl No P2p Intr 1/e11 enabled 128.11 19 DSBL Desg Yes P2p Intr console# show spanning-tree active Spann[...]
-
Page 51
51 Defining STP Port Settings The STP P ort Settings page contains fields for assigning STP pr operties to individual ports. T o open the STP P ort Settings page, click Switch → Spanning T ree → P ort Settings in the tree view . Figure 1-31. STP Port Settings Po r t — P ort on which STP is enabled. STP — Enables or disables STP on the port.[...]
-
Page 52
52 www .dell.com | support.dell.com Lea r ni n g — The port is currently in the learning mode. The port cannot forwar d traffic however it can learn new MAC addr esses. F orwarding — The port is currently in the forwar ding mode . The port can forward traffic and learn new MAC addr esses. Speed — Speed at which the port is operating. P ath Co[...]
-
Page 53
53 Modifying STP Port Properties 1 Open the STP P ort Settings page. 2 Modify the P riority , Fa s t L i n k , P ath Cost , and the Fa s t L i n k fields. 3 Click Apply Changes . The STP port parameters are modi fied, and the device is updated. Displaying the STP Port T able 1 Open the STP P ort Settings page. 2 Click Show All . The STP P ort T abl[...]
-
Page 54
54 www .dell.com | support.dell.com The following is an example of the CLI commands: console(config)# int erface ethernet g5 console(config-if)# spanning-tree disable console(config-if)# spa nning-tree cost 35000 console(config-if)# spann ing-tree port-priority 96 console(config-if)# exit console(config)# exit console# show spanni ng-tree ethernet [...]
-
Page 55
55 Defining STP LAG Settings The STP LAG Settings page contains fields for assigning STP a ggregating port parameters. T o open the STP LAG Settings page, click Switch → Spanning T ree → LAG Settings in the tree view . Figure 1-32. STP LAG Settings Select a LAG — The user -defined LAG. F or more inform ation, see "Defining LAG Membership[...]
-
Page 56
56 www .dell.com | support.dell.com Lea r ni n g — The LAG is in the learning mode and cann ot forward traffic, but it can learn new MA C addresses. F orwarding — The LAG is currently in the forwar ding mode, and it can forward traffic and learn new MA C addresses. Broken — The LAG is currently malfunctioning a nd cannot be used for forwar di[...]
-
Page 57
57 The following is an example of the CLI commands: Configuring Multiple Spanning T ree MSTP operation maps VLANs into STP instances. Multip le Spanning T r ee provides differing load balancing scenario . F or example, while port A is block ed in one STP instance, the same port is placed in the F orwarding State in another STP instance. In addition[...]
-
Page 58
58 www .dell.com | support.dell.com Figure 1-33. MSTP Settings Region Name (1-32 Characters) — Indicates user -defined MSTP r egion name. Revision (0-65535) — Defines unsigned 16-bit number that ident ifies the current MST configuration revision. The revision number is r equired as part of the MST configuration. The possibl e field range is 0-6[...]
-
Page 59
59 Displaying the MSTP Instance T able 1 Open the MSTP Settings page. 2 Click Show All to open the MSTP Instance T able . Figure 1-34. MSTP Instance T able Defining MST Instance s Using CLI Commands The following table summarizes the equivalent CLI commands for defining MST instance groups as displayed in the MSTP Settings page. T able 1-16. MSTP I[...]
-
Page 60
60 www .dell.com | support.dell.com Defining MSTP Interface Settings The MSTP Interface Settings page contains parameters assigning MSTP settings to specific interfaces. T o open the MSTP Interface Settings page, click Switch → Spanning T ree → MSTP Interface Settings in the tree view . Figure 1-35. MSTP Interface Settings Instance ID — Defin[...]
-
Page 61
61 Roo t — P rovides the lowest cost path to forward pack ets to root device. Designated — Indicates the port or LAG via which the de signated device is attached to the LAN. Alternate — P rovides an alternate path to the root device from the root interface. Backup — P rovides a backup path to the designated po rt path toward the Spanning T [...]
-
Page 62
62 www .dell.com | support.dell.com The MSTP Interface T able page opens: Figure 1-36. MSTP Interface T able[...]
-
Page 63
63 Configuring QinQ This section contains information fo r configuring Customer VLANs using th e W eb Interface and using the CLI. QinQ tagging allows network managers to add an additional tag to previous ly tagged pack ets. Customer VLANs are configur ed using QinQ. Adding additional tags to th e packets helps cr eate mor e VLAN space. The added t[...]
-
Page 64
64 www .dell.com | support.dell.com Figure 1-38. Create New VLAN 3 Define the VLAN ID and VLAN Name field. 4 Click . 5 Click Switch > VLAN > P ort Settings . The P ort Settings page opens. Figure 1-39. Port Settings 6 Select the port. 7 Set the P ort VLAN Mode field to Customer . 8 Define the remaining fields. 9 Click . The VLAN P ort setting[...]
-
Page 65
65 Figure 1-40. VLAN Port T able 11 Select the P ort VLAN Mode. 12 Click . The customer VLAN is def ined, and the device is updated. VLAN Port Settings Using CLI Commands The following table summarizes the equivalent CL I commands for viewing fields displayed in the VLAN P ort Settings page. T able 1-17. QinQ CLI Commands CLI Command Console>ena[...]
-
Page 66
66 www .dell.com | support.dell.com The following is an example of the QinQ show commands. Forbidden VLANS: Classification rules: Protocol based VLANs: Console# show interfaces switchport ethernet 1/e5 Port: 1/e5 Port Mode: Customer Gvrp Status: disabled Ingress Filtering: true Acceptable Frame Type: admitAll Ingress UnTagged VLAN ( NATIVE ): 100 P[...]
-
Page 67
67 Mac based VLANs: Subnet based VLANs: console# Group ID Vlan ID -------- ------------------ Group ID Vlan ID -------- ------------------[...]
-
Page 68
68 www .dell.com | support.dell.com Configuring Load Balancing Load Balancing enables the even distribution of data and/or processing packets across available network resources. F or example, load balancing may distribute the incoming packets evenly to all servers, or r edirect the packets to the ne xt available server . Load Balancing is configure[...]
-
Page 69
69 Layer 2-3 — Enables load balancing based on static and dynamic MAC addr esses, and source and destination IP addresses. Layer 2-3-4 — Enables load balancing based on static and dynamic MAC addr esses, source and destination IP addresses, and Source and Destination UDP/T CP ports. LAG — The LAG number . Description (0-64 Characters) — P r[...]
-
Page 70
70 www .dell.com | support.dell.com 4 Click Apply Changes . The LAG parameters are saved to the device. Displaying the LAG Configuration T able: 1 Open the LAG Configuration page. 2 Click Show All. The LAG Configuration T able opens: Figure 1-42. LAG Configuration T able Configuring LAGs with CLI Commands The following table summarizes the equivale[...]
-
Page 71
71 description string Adds a description to an interface configuration. shutdown Disables interfaces that are part of the currently set conte xt. speed bps Configures the speed of a given ethernet interface when not using auto negotiation. autobaud Sets the line for au tomatic baud rate detection. negotiation Enables auto negotiation operation for [...]
-
Page 72
72 www .dell.com | support.dell.com The following is an example of the CLI commands: console(config-if)# channel-group 1 mode on console(config-if)# exit console(config)# inte rface range e g21-24 console(config-if)# channel-group 1 mode on console(config-if)# ex console(config)# in terface ethernet g5 console(config-if)# channel-group 2 mode on co[...]