Go to page of
Similar user manuals
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Deltech Fitness LS2580, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Deltech Fitness LS2580 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Deltech Fitness LS2580. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Deltech Fitness LS2580 should contain:
- informations concerning technical data of Deltech Fitness LS2580
- name of the manufacturer and a year of construction of the Deltech Fitness LS2580 item
- rules of operation, control and maintenance of the Deltech Fitness LS2580 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Deltech Fitness LS2580 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Deltech Fitness LS2580, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Deltech Fitness service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Deltech Fitness LS2580.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Deltech Fitness LS2580 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Form No: X-1183 (01/2000) Printed in USA Installation, Operation and Maintenance Manual HYDROBLOC LS SERIES HEA TLESS COMPRESSED AIR DR YER MODEL LS60 through LS2580 This instruction manual must be read by everyone who installs or works with this equipment[...]
-
Page 2
[...]
-
Page 3
Contents HYDROBLOC LS SERIES SPECIFICATIONS Section 1 General Information 1.1 Foreword ............................................................................................................................... 1 - 1 1.2 General System Information ................................................................................................. [...]
-
Page 4
Contents Section 4 Maintenance and Repair 4.1 Preventative Maintenance Schedule .................................................................................... 4 - 1 Weekly .................................................................................................................................. 4 - 1 Quarterly .........................[...]
-
Page 5
HYDROBLOC LS SERIES SPECIFICA TIONS ¹ Based on 100°F inlet air temperature and -40°F pressure dew point. Maxi- mum recommended inlet temperature, 120°F. For capacity at inlet tem- perature higher than 100°F, consult your local distributor. DETAIL SPECIFICATIONS: Dryer Cycle: NEMA Cycle 6 m inute s Drying 3 minutes Regeneration 3 minutes Dryer [...]
-
Page 6
HYDROBLOC LS SERIES SPECIFICA TIONS MODEL PREFILTER AFTERFILTER LS60 D-0100-CF D-0100-PF LS110 D-0175-CF D-0100-PF LS130 D-0175-CF D-0170-PF LS185 D-0250-CF D-0170-PF LS240 D-0250-CF D-0300-PF LS270 D-0400-CF D-0300-PF LS360 D-0400-CF D-0405-PF LS505 D-0600-CF D-0510-PF LS630 D-0600-CF D-0850-PF LS760 D-0750-CF D-0850-PF LS1000 D-1000-CF D-1020-PF [...]
-
Page 7
General Information 1 - 1 CAUTION: Each component of a Deltech Hydrobloc LS Series heaterless regenerative desiccant dryer system has been selected to compliment the performance of the other components of the system. Therefore, use of unauthorized parts or supplies or improper operation will degrade system performance. 1.2.1 Dryer This fully automa[...]
-
Page 8
1 - 2 General Information 1.2.3 Automatic Drain V alves As previously stated, the accumulated water and oil mix- ture collected by a prefilter must be periodically drained from the prefilter housing sump. A Deltech Automatic Drain Valve is a recommended and reliable means of removing collected moisture, oil and sludge from coalescing prefilter hous[...]
-
Page 9
Installation 2 - 1 2 Installation Dryer models LS15 through LS1500 are designed to be moved by means of forklift slotting at the base of the dryer ’ s protective shipping framework and lifting straps in- stalled on the dryer. Dryer models LS2070 and LS2580 are designed to be moved by means of lifting lugs supplied on the desiccant chambers. 2. 3 [...]
-
Page 10
2 - 2 Installation 2 . 4 General Piping Information NOTE 1: Use the proper pressure rated piping, fittings and valves as approved by ASME, ANSI, ASA, etc. Separate or special requirements by local and/or municipal codes may also apply. NOTE 2: The manufacturer is not liable for code viola- tions, downtime, component failure or conse- quential damag[...]
-
Page 11
Installation 2 - 3 2 .7 Electrical Connection NOTE 1: Use proper, load-rated components as ap- proved by NEC, NEMA, CSA, UL, etc., as re- quired. Local and municipal codes may also apply. All installations and connections must be in accordance with recognized electrical codes in effect. NOTE 2: It is mandatory that each dryer be individually GROUND[...]
-
Page 12
2 - 4 Installation CAUTION ST A TIC SENSITIVE DEVICES STATIC SENSITIVE DEVICES CAN BE DAMAGED BY ELECTROSTATIC DISCHARGE. YOU CAN MINIMIZE THE CHANCES OF DESTROYING SUCH DEVICES BY: 1. KNOWING THAT THERE IS A POTENTIAL STATIC SENSITIVE PROBLEM. 2. ADHERING TO THE GUIDELINES LISTED BELOW FOR HANDLING THEM. 3. USING RECOMMENDED PACKAGING AND BENCH TE[...]
-
Page 13
Installation 2 - 5 CAUTION: Surges, spikes and input voltage of less than eighty-five (85) VAC or greater than one hundred and thirty-two (132) VAC, may cause the Dryer Con- trol System to operate erratically, or malfunction. This malfunction may or may not be accompanied by an alarm. Adequate surge, spike, brownout, and blackout protection must be[...]
-
Page 14
2 - 6 Installation b ) Close the dryer control system enclosure cover and tighten all cover latches. CAUTION: Do not remove the factory programmed micro- computer chip or any I.C. chip from the logic control circuit board. Improper removal will cause irreparable damage to these highly static-sensitive components. Damage to these components will ren[...]
-
Page 15
Installation 2 - 7 When the Energy Management System LED indicator is OFF, the dryer either does not have the Compu-Save En- ergy Management System option, or that the sensor has determined that the relative humidity in the on-line chamber has reached the predetermined set point. At next switchover, that chamber will regenerate using purge air. Whe[...]
-
Page 16
[...]
-
Page 17
Operation 3 - 1 3 Operation that power is supplied to the drain valve; the other LED in- dicates that the drain port is open. The power indicator turns off when the drain port opens. If either LED fails to turn on at the proper time, refer to the maintenance section of this manual. If the dryer is under warranty, call your local representative for [...]
-
Page 18
3 - 2 Operation Do not start the dryer with compressed air flow through the dryer. Close customer supplied dryer shut-off valves before beginning start-up procedure. 1 . Refer to the General Arrangement drawing as neces- sary for component identification and location while conducting start-up and operational procedures. Note: If your dryer cannot b[...]
-
Page 19
Operation 3 - 3 Afterfilter cartridges are NOT interchangeable and must be installed in their respective assemblies ONLY . The proper filter cartridge part number is listed on each Prefilter and Afterfilter Assembly. 3. Replace and tighten filter assembly bowls. Ensure that O-rings are properly seated. 4 . Close any manual vent or drain valves inst[...]
-
Page 20
3 - 4 Operation IMPORTANT: Water molecules can diffuse through a pinhole-size leak even though pressure inside the piping is several hundred PSIG. It is not uncommon to have a minute pinhole leak in a gas line cause an increase in dew point from -40 ° F to -10 ° F at a dis- tance of forty or more feet downstream of the leak. 12. SLOWLY open the c[...]
-
Page 21
Operation 3 - 5 right chamber. Both Purge Exhaust Switching Valves will close. The desiccant chambers will im- mediately begin pressurizing to system pressure as indicated by chamber pressure gauges. 10 . The Moisture Indicator ’ s (if dryer so-equipped) bleed valve is installed directly into the back of the indicator ’ s body. Close the Indica[...]
-
Page 22
3 - 6 Operation 5. Close any manual vent or drain valves installed in prefilter and afterfilter assemblies. 6 . If the prefilter assembly utilized was factory- equipped with an automatic drain valve or drain trap, inspect for, and remove pipe plug or cap which may have been installed in drain port for shipping pur- poses. 7. Ensure that all associa[...]
-
Page 23
Operation 3 - 7 2 0. The Start-Up procedure for models LS2070 and LS2580 is now complete. Proceed to the Normal Operation Checks section of this manual for final op- erational checks and adjustments. 3 . 5 Normal Start-Up or Restart For Dryers With Fixed Cycle Electronic Timer Control (Models LS60 through LS1000 only) 1. Close the Pilot Gas Filter&[...]
-
Page 24
3 - 8 Operation chamber is pressurized, the Purge Pressure Indica- tor will read “ system pressure ” .) 12. The Normal Start-Up or Restart procedure for mod- els LS60 through LS1000 is now complete. Proceed to the Normal Operational Checks section of this manual for final operational checks and adjustments. Dryer Models LS1250 and LS1500 1. Clo[...]
-
Page 25
Operation 3 - 9 pressurized for regeneration. (When the off-line chamber is pressurized, the Purge Pressure Indica- tor will read “ system pressure ” .) 13. The Normal Start-Up or Restart procedure for mod- els LS2070 through LS2580 is now complete. Pro- ceed to the Normal Operational Checks section of this manual for final operational checks a[...]
-
Page 26
3 - 10 Operation b) Close the Pilot Gas Supply Valve. c ) Open the Pilot Gas Filter's Bleed Valve. Allow pi- lot gas system to depressurize through the Pilot Gas Filter ’ s Bleed Valve. When pilot gas pres- sure is sufficiently reduced, the Purge Exhaust Switching Valves will automatically open to de- pressurize dryer through Purge Exhaust M[...]
-
Page 27
Maintenance and Repair 4 - 1 4. 1 Preventative Maintenance Schedule Weekly 1 . Check the following operating conditions: a) Purge pressure setting (during regeneration) b) Inlet pressure c ) Inlet flow rate d) Inlet temperature For optimum dryer operation and performance, these recorded parameters should correspond as close as is possible to the de[...]
-
Page 28
4 - 2 Maintenance and Repair Annually WARNING! Ensure that the Dryer and any associated Prefilters and Afterfilters are valve isolated and fully depressur- ized before attempting to remove or disassemble any components or subassemblies. Failure to do so may result in serious personal injury and/or equip- ment damage. 1 . Disassemble, clean and insp[...]
-
Page 29
Maintenance and Repair 4 - 3 For Dryer Models LS60 through LS1500 a) Fill each chamber with OPD-4 (4mm bead) desic- cant until the specified quantity has been in- stalled. Light tapping on the chamber sides with a soft-face mallet should yield additional free space to allow installation of the specified quan- tity. DO NOT TAMP OR RAM DESICCANT . Fo[...]
-
Page 30
4 - 4 Maintenance and Repair 6. Clean accumulated debris from the bowl with soap and water, and dry thoroughly. 7 . LIGHTLY lubricate the new O-ring with a petroleum- based lubricant that is compatible with your applica- tion before installing the new element. 8 . Insert new element, snapping it into place with a firm push up into the head. The ele[...]
-
Page 31
Maintenance and Repair 4 - 5 ized. DO NOT continue to remove the bowl until the filter has been completely vented to atmospheric pressure. CAUTION: Filter bowls may be heavy. Caution should be taken when removing the bowl. 4. Remove the bottom bowl by unscrewing it from the head. A strap wrench may be needed. 5 . Remove the nut from the bottom of t[...]
-
Page 32
4 - 6 Maintenance and Repair WARNING! Ensure that the Dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any Dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment damage. 3 . Remove hose that connects the drain valve to the fil- ter. 4 . Remov[...]
-
Page 33
Maintenance and Repair 4 - 7 4. 6 Moisture Indicator Recharging Procedure Note: Dryer shutdown is not necessary to perform the fol- lowing procedure and can be accomplished without remov- ing the entire assembly. 1. Close the Moisture Indicator Supply Valve, and en- sure that the Moisture Indicator has fully depressur- ized through bleed valve [5] [...]
-
Page 34
4 - 8 Maintenance and Repair 4.7 Inlet and Purge Exhaust Switching V alve Maintenance (LS60 through LS760) WARNING! Ensure that the Dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any Dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment da[...]
-
Page 35
Maintenance and Repair 4 - 9 Figure 4.4 INLET AND PURGE EXHAUST SWITCHING VALVE (LS60, LS110, LS130, LS185, LS240, LS270, LS360, LS505, LS630, LS760) NOTE: 1. When the unit is located in a corrosive environment, coat sockethead cap screws with a corrosion resistant compound. 4 10 10 1 9 11 16 5 23 21 23 12 18 6 2 19 8 6 18 12 23 21 23 5 16 11 9 1 1[...]
-
Page 36
4 - 1 0 Maintenance and Repair 4.8 Inlet and Purge Exhaust Switching V alve Maintenance (LS1000) WARNING! Ensure that the Dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any Dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment damage. 1 . [...]
-
Page 37
Maintenance and Repair 4 - 1 1 Figure 4.6 INLET AND PURGE EXHAUST SWITCHING VALVE (LS1000) NOTE: 1. When the unit is located in a corrosive environment, coat sockethead cap screws with a corrosion resistant compound. 18 2 14 19 13 11 16 4 16 17 1 15 7 17 16 4 16 11 13 19 14 3 18 20 21 22 14 16 5 16 6 8 12 10 9 10 12 6 16 5 16 14 22 20 21[...]
-
Page 38
4 - 1 2 Maintenance and Repair 4.9 3" Inlet Switching V alve Maintenance (Models LS1250 and LS1500) WARNING! Ensure that the dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment dama[...]
-
Page 39
Maintenance and Repair 4 - 1 3 20 19 14 10 11 10 15 18 16 22 21 8 17 8 16 23 15 10 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Figure 4.7 3" INLET SWITCHING VALVE (LS1250, LS1500) NOTE: 1. When the unit is located in a corrosive environment, coat sockethead cap screws with a corrosion resis- tant compound.[...]
-
Page 40
4 - 1 4 Maintenance and Repair 4.10 2" Purge Exhaust Switching V alve Maintenance (Model LS1250 only) WARNING! Ensure that the Dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any Dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment da[...]
-
Page 41
Maintenance and Repair 4 - 1 5 1 5 8 12 15 13 6 2 16 14 11 10 9 7 3 3 4 Figure 4.8 2" PURGE EXHAUST (LS1250) NOTE: 1. When the unit is located in a corrosive environment, coat sockethead cap screws with a corrosion resis- tant compound. 18 16 17[...]
-
Page 42
4 - 1 6 Maintenance and Repair 4.1 1 3" Purge Exhaust Switching V alve Maintenance (Model LS1500 only) WARNING! Ensure that the dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment d[...]
-
Page 43
Maintenance and Repair 4 - 1 7 20 18 19 15 10 14 13 12 11 10 9 8 7 6 5 4 3 2 1 17 8 16 Figure 4.9 3" PURGE EXHAUST SWITCHING VALVE (LS1500) NOTE: 1. When the unit is located in a corrosive environment, coat sockethead cap screws with a corrosion resis- tant compound.[...]
-
Page 44
4 - 1 8 Maintenance and Repair 4.12 Purge and Outlet Check V alve Maintenance (Models LS60 through LS760) WARNING! Ensure that the dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment dam[...]
-
Page 45
Maintenance and Repair 4 - 1 9 Figure 4.10 PURGE AND OUTLET CHECK VALVE ASSEMBLIES (LS60, LS110, LS130, LS185, LS240, LS270, LS360, LS505, LS630, LS760) 2 5 15 9 1 12 14 11 4 6 3 10 8 7 13 NOTE: 1. When the unit is located in a corrosive environment, coat items (2) and (3) with a corrosion resistant com- pound. 2. Torque 1/4 - 20 screws to 40 in-lb[...]
-
Page 46
4 - 2 0 Maintenance and Repair 4.13 3" Purge and Outlet Check V alve Maintenance (Models LS1000 through LS1500) WARNING! Ensure that the Dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any Dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or eq[...]
-
Page 47
Maintenance and Repair 4 - 2 1 Figure 4.11 3" PURGE AND OUTLET CHECK VALVE ASSEMBLIES (LS1000, LS1250, LS1500) NOTE: 1. When the unit is located in a corrosive environment, coat items (13) and (14) with a corrosion resistant compound. 2. Torque 5/16 - 18 screws to 135 in-lbs. Torque 3/8 - 16 screws to 245 in-lbs. 1 2 3 4 5 7 8 9 10 11 12 13 6 [...]
-
Page 48
4 - 2 2 Maintenance and Repair 4.14 Remote Flow Restrictor Maintenance (Model LS1250 only) WARNING! Ensure that the dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment damage. 1. Remove [...]
-
Page 49
Maintenance and Repair 4 - 2 3 4.15 Flow Restrictor Maintenance (Models LS1500 through LS2580) WARNING! Ensure that the dryer and any associated prefilters and afterfilters are valve isolated and fully depressur- ized before attempting to remove or disassemble any components or subassemblies. Failure to do so may result in serious personal injury a[...]
-
Page 50
DISASSEMBLY/ASSEMBLY INSTRUCTIONS ACTUATOR SUBASSEMBLY 1. Disassemble/Build the actuator subassembly in the order shown by the Actuator Subassembly Diagram (Figure 4.15). A) Secure the retaining plate in the jaws of a vise. B ) Apply Loctite ™ RC-620 to the threads of the shaft guide and thread it into the retaining plate. Using a 1" combina[...]
-
Page 51
SHAFT SUBASSEMBLY DETAIL 'C' 2. Adjust orifice stroke. A) Invert the actuator subassembly and place in a vice as shown in Detail C. B) Gently press the flange to the orifice. C) Tighten the nut until the spring retainer slightly contacts the shaft guide. D) Continue tightening nut for an additional 1/2 turn. E) Remove subassembly from the[...]
-
Page 52
4.16 Purge Adjusting V alve (Models LS2070 and LS2580) WARNING! Ensure that the dryer is de-energized, valve isolated and fully depressurized before attempting to remove or disassemble any dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment damage. Note: Removal of valve body [4] is not required[...]
-
Page 53
4.17 Pilot Gas Filter Maintenance (Models LS2070 and LS2580) WARNING! Ensure that the dryer is de-energized, valve isolated, and fully depressurized before attempting to remove or disassemble any dryer component or subassem- bly. Failure to do so may result in serious personal injury and/or equipment damage. Note: Flow through filter assembly is fr[...]
-
Page 54
[...]
-
Page 55
Troubleshooting Guide 5 - 1 5 T roubleshooting Guide Dew point degradation 1. Insufficient or excessive purge gas flow during regeneration. 2 . Inlet gas pressure is below the design pres- sure specified on the Dryer Specification La- bel located on the inside cover of the dryer control system enclosure. 3. Inlet gas flow (SCFM) is above the dryer [...]
-
Page 56
5 - 2 Troubleshooting Guide 4. Check the compressor aftercooler and cooling system. Adjust as necessary to bring the dryer inlet temperature to design specification. 5. Isolate and depressurize Prefilter Assembly. Inspect prefilter cartridges and end seals for loosening and/or damage. Tighten or replace as necessary. CAUTION: Each component of an D[...]
-
Page 57
Troubleshooting Guide 5 - 3 Back pressure on a desiccant chamber during the regeneration cycle. (Chamber ’ s pressure gauge indicates above zero (0) PSIG. Note: The presence of back pressure will result in insufficient regeneration followed by dew point degradation. An off-stream chamber ’ s pressure gauge MUST indicate zero (0) PSIG throughout[...]
-
Page 58
5 - 4 Troubleshooting Guide Excessive pressure drop across dryer. 1. Badly broken, dusted or fouled desiccant. 2 . Inlet flow rate (SCFM) is exceeding the dryer ’ s design flow rate as specified on the Dryer Specification Label located on the in- side cover of the dryer system control enclo- sure. 3. Desiccant retaining screens are clogged or fou[...]
-
Page 59
Troubleshooting Guide 5 - 5 b) For Models LS1500 through LS2580 WARNING! Removal of the Flow restrictor should not be done un- less the piping to the Purge Exhaust Muffler is ad- equately supported. Failure to do so may result in serious personal injury and/or equipment damage. 1. Remove Flow Restrictor from the line and refer to the Flow Restricto[...]
-
Page 60
5 - 6 Troubleshooting Guide 4. Check for pilot gas pressure at on-stream chamber exhaust valve ’ s pilot tubing connection. If pilot pressure is present, Shutdown and Depressurize Dryer. Disassemble, clean and inspect the Switching Valve. Replace all worn or damaged parts as noted. 1. Check indicator lights at solenoid block to determine whether [...]
-
Page 61
Troubleshooting Guide 5 - 7 1a . Verify the actual inlet flow rate. Reduce flow rate if operating above the inlet flow rate specified on the Dryer Specification La- bel. If the verified inlet flow rate is not exceeding the specified de- sign flow rate, proceed to POSSIBLE CAUSE #1b. 1 b . Allow the dryer to remain energized and operating in a fixed[...]
-
Page 62
5 - 8 Troubleshooting Guide PROBLEM/POSSIBLE CAUSE CHECKS AND REMEDY 4. Off-stream chamber ’ s Inlet Switching Valve or on-stream chamber ’ s Purge Exhaust Switching Valve seat is worn, damaged or fouled (allowing slight pressure leakage to enter regenerating chamber). Fixed Cycle Electronic Timer Control (Mod- els LS60 through LS1000 ONLY) Dry[...]
-
Page 63
Troubleshooting Guide 5 - 9 PROBLEM/POSSIBLE CAUSE CHECKS AND REMEDY Automatic drain valve continually discharging or venting. 1 . Clogged diaphragm. 2. Short in electrical component. Automatic drain valve not discharging. 1 . No electrical power. 2 . Timer malfunction. 3 . Solenoid coil malfunction. 4 . Clogged ports. No response when push-to-test[...]
-
Page 64
[...]
-
Page 65
Appendix A Purge Curves[...]
-
Page 66
A - 2 Purge Curves[...]
-
Page 67
Purge Curves A - 3 HYDROBLOC LS SERIES PURGE CURVES Calculation of Purge Pressure Setting 6. Locate the Purge Adjusting Valve. Slowly rotate dryer ’ s Purge Adjusting Valve until the Purge Pres- sure Indicator indicates the calculated purge pressure setting. (See following Note). Note: The purge pressure can only be read and ad- justed when an of[...]
-
Page 68
A - 4 Purge Curves Figure A.1 — Critical Orifice Calibration Curve (LS60) Orifice Dia. .129 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 5 8 10 12 PURGE GAS FLOW RA TE (SCFM) 14 P 1 10 30 50 70 90 4 0 PURGE PRESSURE P 1 PSIG 67 9 1 1 1 3 1 5 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 69
Purge Curves A - 5 Figure A.2 — Critical Orifice Calibration Curve (LS110) Orifice Dia. .156 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 6 1 21 62 0 PURGE GAS FLOW RA TE (SCFM) 24 P 1 10 30 50 70 90 4 0 PURGE PRESSURE P 1 PSIG 8 1 01 41 82 22 6 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 70
A - 6 Purge Curves Figure A.3 — Critical Orifice Calibration Curve (LS130) Orifice Dia. .172 Gas: Ai r Temp: 10 0 ° F C D : .65 100 80 60 40 20 10 14 18 22 PURGE GAS FLOW RA TE (SCFM) 26 P 1 10 30 50 70 90 6 0 PURGE PRESSURE P 1 PSIG 24 20 16 81 2 2 8 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 71
Purge Curves A - 7 Figure A.4 — Critical Orifice Calibration Curve (LS185) Orifice Dia. .203 Gas: Ai r Temp: 10 0 ° F C D : .65 100 80 60 40 20 15 20 25 30 PURGE GAS FLOW RA TE (SCFM) 35 P 1 10 30 50 70 90 10 0 PURGE PRESSURE P 1 PSIG HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 72
A - 8 Purge Curves Figure A.5 — Critical Orifice Calibration Curve (LS240) Orifice Dia. .257 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 20 30 40 50 PURGE GAS FLOW RA TE (SCFM) 60 P 1 10 30 50 70 90 10 0 PURGE PRESSURE P 1 PSIG 55 45 35 15 25 65 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 73
Purge Curves A - 9 Figure A.6 — Critical Orifice Calibration Curve (LS270) Orifice Dia. .272 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 25 35 45 55 PURGE GAS FLOW RA TE (SCFM) 65 P 1 10 30 50 70 90 15 0 PURGE PRESSURE P 1 PSIG 60 50 40 20 30 70 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 74
A - 1 0 Purge Curves Figure A.7 — Critical Orifice Calibration Curve (LS360) Orifice Dia. .290 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 35 45 55 65 PURGE GAS FLOW RA TE (SCFM) 75 P 1 10 30 50 70 90 25 0 PURGE PRESSURE P 1 PSIG 70 60 50 30 40 80 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 75
Purge Curves A - 1 1 Figure A.8 — Critical Orifice Calibration Curve (LS505) Orifice Dia. .359 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 40 60 80 100 PURGE GAS FLOW RA TE (SCFM) 120 P 1 10 30 50 70 90 20 0 PURGE PRESSURE P 1 PSIG 11 0 90 70 30 50 130 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 76
A - 1 2 Purge Curves Figure A.9 — Critical Orifice Calibration Curve (LS630) Orifice Dia. .375 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 50 70 90 110 PURGE GAS FLOW RA TE (SCFM) 130 P 1 10 30 50 70 90 30 0 PURGE PRESSURE P 1 PSIG 120 100 80 40 60 140 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 77
Purge Curves A - 1 3 Figure A.10 — Critical Orifice Calibration Curve (LS760) Orifice Dia. .438 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 80 100 120 140 PURGE GAS FLOW RA TE (SCFM) 160 P 1 10 30 50 70 90 60 0 PURGE PRESSURE P 1 PSIG 150 130 11 0 70 90 170 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 78
A - 1 4 Purge Curves 100 80 60 40 20 80 120 160 200 PURGE GAS FLOW RA TE (SCFM) 240 P 1 60 100 140 180 220 10 30 50 70 90 40 0 PURGE PRESSURE P 1 PSIG 260 Orifice Dia. .563 Gas: A ir Temp: 1 00 ° F C D : .65 Figure A.11 — Critical Orifice Calibration Curve (LS1000) HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 79
Purge Curves A - 1 5 100 80 60 40 20 125 175 225 275 PURGE GAS FLOW RA TE (SCFM) 325 P 1 100 150 200 250 300 10 30 50 70 90 75 0 PURGE PRESSURE P 1 PSIG 350 Figure A.12 — Critical Orifice Calibration Curve (LS1250, LS1500) Orifice Dia. .688 Gas: A ir Temp: 1 00 ° F C D : .65 HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 80
A - 1 6 Purge Curves 11 0 90 70 50 30 200 300 400 500 PURGE GAS FLOW RA TE (SCFM) 600 P 1 150 250 350 450 550 20 40 60 80 100 100 10 PURGE PRESSURE P 1 PSIG 650 Orifice Dia. .750 Gas: A ir Temp: 1 00 ° F C D : .65 Figure A.13 — Critical Orifice Calibration Curve (LS20700, LS2580) HYDROBLOC LS SERIES PURGE CURVES[...]
-
Page 81
Replacement Parts B - 1 Appendix B Replacement Parts[...]
-
Page 82
B - 2 Replacement Parts Description Quantity Model Model Model Model Model Required* LS60 LS 1 10 LS130 LS185 LS240 Muf fler 1 1283853 1283853 1283853 1283853 1283853 Relie f V alve 1 1 124704 1 124704 1124704 1 124704 1124704 Pressure Gauge 3 1 125546 1125546 1 125546 1 125546 1125546 AQUADEX ® Repair Kit 1 1207278 1207278 1207278 1207278 1207278[...]
-
Page 83
Replacement Parts B - 3 HYDROBLOC LS REPLACEMENT P ARTS Description Quantity Model Model Model Model Model Required* LS270 LS360 LS505 LS630 LS760 Muf fler 1 1283853 1283853 1283285 1283285 1283285 Relie f V alve 1 1 124704 1 124704 1 124704 1 124704 1 124704 Pressure Gauge 3 1 125546 1 125546 1 125546 1 125546 1 125546 AQUADEX ® Repair Kit 1 1207[...]
-
Page 84
B - 4 Replacement Parts Description Quantity Model Model Model Model Model Required* LS1000 LS1250 LS1500 LS2070 LS2580 Muffler 1 1283853 1283853 1283853 1283853 1283853 Relief V alve 1 1 124704 1 124704 1 124704 1 124704 1 124704 Pressure Gauge 3 1 125546 1 125546 1 125546 1 125546 1 125546 AQUADEX ® Repair Kit 1 1207278 1207278 1207278 1207278 1[...]
-
Page 85
Appendix C Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers[...]
-
Page 86
C - 2 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers[...]
-
Page 87
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 3 HYDROBLOC LSC SPECIFICA TIONS ¹ Based on 100 ° F inlet air temperature and -100 ° F pressure dew point. Maximum recommended inlet temperature, 120 ° F. For capacity at inlet temperature higher than 100 ° F, consult your local distributor. DETAIL SP[...]
-
Page 88
C - 4 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers HYDROBLOC LSC SPECIFICA TIONS MODEL PR EFILTER AFTERFILTER LSC60 D-0050-CF D-0050-PF LSC110 D-0100-CF D-0100-PF LSC130 D-0100-CF D-0100-PF LSC185 D-0175-CF D-0100-PF LSC240 D-0175-CF D-0170-PF LSC270 D-0175-CF D-0170-PF LSC360 D-0250-CF D-0300-PF LSC505[...]
-
Page 89
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 5 HYDROBLOC LSC PURGE CURVES Calculation of Purge Pressure Setting 6. Locate the Purge Adjusting Valve. Slowly rotate dryer ’ s Purge Adjusting Valve until the Purge Pres- sure Indicator indicates the calculated purge pres- sure setting. (See following [...]
-
Page 90
C - 6 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers Figure C.1 — Critical Orifice Calibration Curve (LSC60) Orifice Dia. .094 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 3 4.5 5.5 6.5 PURGE GAS FLOW RA TE (SCFM) 7.5 P 1 10 30 50 70 90 2.5 0 PURGE PRESSURE P 1 PSIG 3 . 5 45678 HYDROBLOC LSC PURGE [...]
-
Page 91
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 7 Figure C.2 — Critical Orifice Calibration Curve (LSC110) HYDROBLOC LSC PURGE CURVES Orifice Dia. .129 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 5 8 10 12 PURGE GAS FLOW RA TE (SCFM) 14 P 1 10 30 50 70 90 4 0 PURGE PRESSURE P 1 PSIG 67 9 1 1 1 [...]
-
Page 92
C - 8 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers Figure C.3 — Critical Orifice Calibration Curve (LSC130) HYDROBLOC LSC PURGE CURVES Orifice Dia. .156 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 61 2 1 6 2 0 PURGE GAS FLOW RA TE (SCFM) 24 P 1 10 30 50 70 90 4 0 PURGE PRESSURE P 1 PSIG 8 1 01 4[...]
-
Page 93
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 9 Figure C.4 — Critical Orifice Calibration Curve (LSC185) HYDROBLOC LSC PURGE CURVES Orifice Dia. .172 Gas: Ai r Temp: 10 0 ° F C D : .65 100 80 60 40 20 10 14 18 22 PURGE GAS FLOW RA TE (SCFM) 26 P 1 10 30 50 70 90 6 0 PURGE PRESSURE P 1 PSIG 24 20 1[...]
-
Page 94
C - 10 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers Figure C.5 — Critical Orifice Calibration Curve (LSC240, LSC270) HYDROBLOC LSC PURGE CURVES Orifice Dia. .203 Gas: Ai r Temp: 10 0 ° F C D : .65 100 80 60 40 20 15 20 25 30 PURGE GAS FLOW RA TE (SCFM) 35 P 1 10 30 50 70 90 10 0 PURGE PRESSURE P 1 PS[...]
-
Page 95
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 11 Figure C.6 — Critical Orifice Calibration Curve (LSC360) HYDROBLOC LSC PURGE CURVES Orifice Dia. .257 Gas: Ai r Temp: 10 0 ° F C D : .65 100 80 60 40 20 20 30 40 50 PURGE GAS FLOW RA TE (SCFM) 60 P 1 10 30 50 70 90 10 0 PURGE PRESSURE P 1 PSIG 55 45[...]
-
Page 96
C - 12 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers HYDROBLOC LSC PURGE CURVES Figure C.7 — Critical Orifice Calibration Curve (LSC505) Orifice Dia. .290 Gas: Ai r Temp: 10 0 ° F C D : .65 100 80 60 40 20 35 45 55 65 PURGE GAS FLOW RA TE (SCFM) 75 P 1 10 30 50 70 90 25 0 PURGE PRESSURE P 1 PSIG 70 60[...]
-
Page 97
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 13 HYDROBLOC LSC PURGE CURVES Orifice Dia. .313 Gas: Air Temp: 100 ° F C D : .65 100 80 60 40 20 20 40 60 80 PURGE GAS FLOW RA TE (SCFM) 100 P 1 10 30 50 70 90 10 30 50 70 90 0 0 PURGE PRESSURE P 1 PSIG 11 0 Figure C.8 — Critical Orifice Calibration Cu[...]
-
Page 98
Figure C.9 — Critical Orifice Calibration Curve (LSC760) Orifice Dia. .359 Gas: Ai r Temp: 10 0 ° F C D : .65 100 80 60 40 20 40 60 80 100 PURGE GAS FLOW RA TE (SCFM) 120 P 1 10 30 50 70 90 20 0 PURGE PRESSURE P 1 PSIG 11 0 90 70 30 50 130 HYDROBLOC LSC PURGE CURVES[...]
-
Page 99
100 80 60 40 20 40 60 80 100 PURGE GAS FLOW RA TE (SCFM) 120 P 1 30 50 70 90 1 10 10 30 50 70 90 20 0 PURGE PRESSURE P 1 PSIG 130 Orifice Dia. .406 Gas: A ir Temp: 1 00 ° F C D : .65 Figure C.10 — Critical Orifice Calibration Curve (LSC1000, LSC1250) HYDROBLOC LSC PURGE CURVES[...]
-
Page 100
100 80 60 40 20 40 80 120 160 PURGE GAS FLOW RA TE (SCFM) 200 P 1 20 60 100 140 180 10 30 50 70 90 0 0 PURGE PRESSURE P 1 PSIG 220 Orifice Dia. .500 Gas: A ir Temp: 1 00 ° F C D : .65 Figure C.11 — Critical Orifice Calibration Curve (LSC1500) HYDROBLOC LSC PURGE CURVES[...]
-
Page 101
100 80 60 40 20 80 120 160 200 PURGE GAS FLOW RA TE (SCFM) 240 P 1 60 100 140 180 220 10 30 50 70 90 40 0 PURGE PRESSURE P 1 PSIG 260 Orifice Dia. .563 Gas: A ir Temp: 1 00 ° F C D : .65 Figure C.12 — Critical Orifice Calibration Curve (LSC2070) HYDROBLOC LSC PURGE CURVES[...]
-
Page 102
C - 18 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers 100 80 60 40 20 125 175 225 275 PURGE GAS FLOW RA TE (SCFM) 325 P 1 100 150 200 250 300 10 30 50 70 90 75 0 PURGE PRESSURE P 1 PSIG 350 Orifice Dia. .688 Gas: A ir Temp: 1 00 ° F C D : .65 Figure C.13 — Critical Orifice Calibration Curve (LSC2580) H[...]
-
Page 103
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 19 HYDROBLOC LSC REPLACEMENT P ARTS Description Quantity Model Model Model Model Model Re quir ed* LSC60 LSC110 LSC130 LSC185 LSC240 Muffler 1 1283853 1283853 1283853 1283853 1283853 Relief V alve 1 1 124704 1 124704 1 124704 1 124704 1 124704 Pressure Ga[...]
-
Page 104
C - 20 Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers HYDROBLOC LSC REPLACEMENT P ARTS Description Quantity Model Model Model Model Model Required* LSC270 LSC360 LSC505 LSC630 LSC760 Muffler 1 1283853 1283853 1283285 1283285 1283285 Relief V alve 1 1 124704 1 124704 1 124704 1 124704 1 124704 Pressure Gau[...]
-
Page 105
Specifications, Purge Curves and Replacement Parts for -100 ° F Pressure Dew Doint Dryers C - 21 HYDROBLOC LSC REPLACEMENT P ARTS Description Quantity Model Model Model Model Model Required* LS1000 LS1250 LS1500 LS2070 LS2580 Muf fler 1 1283853 1283853 1283853 1283853 1283853 Relie f V alve 1 1 124704 1 124704 1 124704 1 124704 1 124704 Pressure G[...]
-
Page 106
[...]
-
Page 107
[...]
-
Page 108
4647 SW 40th Avenue • Ocala, FL 34474-5799 Telephone 352-873-5700 • Fax 352-873-5744 WEB ADDRESS: www.udi-flair.com/deltech E-MAIL: deltech@udi-flair.com U.S. FACILITIES New Castle, Delaware Ocala, Florida Stanley, North Carolina CANADIAN FACILITIES Brockville, Ontario Tel. 800-893-5247 • Fax 800-318-0952 EUROPEAN FACILITIES Horndean, Hants, [...]