Go to page of
Similar user manuals
-
Automobile
Dodge 2008 ND Dakota
426 pages 6.39 mb -
Automobile
Dodge 2010
512 pages 8.48 mb -
Automobile
Dodge 2010 Charger SRT
442 pages 7.4 mb -
Automobile
Dodge 2009 Journey
523 pages 8.91 mb -
Automobile
Dodge 2007 Ram 2500
568 pages 19.43 mb -
Automobile
Dodge 2008 Charger
466 pages 6.37 mb -
Automobile
Dodge 2005 Sprinter Cab & Chassis
288 pages 27.89 mb -
Automobile
Dodge 2006 HB Durango
440 pages 6.63 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Dodge 2008 Viper, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Dodge 2008 Viper one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Dodge 2008 Viper. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Dodge 2008 Viper should contain:
- informations concerning technical data of Dodge 2008 Viper
- name of the manufacturer and a year of construction of the Dodge 2008 Viper item
- rules of operation, control and maintenance of the Dodge 2008 Viper item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Dodge 2008 Viper alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Dodge 2008 Viper, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Dodge service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Dodge 2008 Viper.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Dodge 2008 Viper item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Viper OWNER’ S MANUAL 2008 2008 Viper 81-226-0804 Second Edition Printed in U.S.A.[...]
-
Page 2
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 6 1 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]
-
Page 3
[...]
-
Page 4
INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual .................. 4 m W arnings And Cautions ................... 6 m V ehicle Identification Number ............... 6 m V ehicle Modifications / Alterations ........... 7 1[...]
-
Page 5
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]
-
Page 6
INTRODUCTION 5 1[...]
-
Page 7
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]
-
Page 8
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]
-
Page 9
[...]
-
Page 10
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 3 m Security Alarm System .................... 1 3 ▫ Rearming Of The System ................. 1 3 ▫ T o Arm The System ..................... 1 3[...]
-
Page 11
m Door Locks ............................ 2 3 ▫ Manual Door Lock ..................... 2 4 ▫ Power Door Locks ..................... 2 4 m W indows ............................. 2 6 ▫ Power W indows ....................... 2 6 ▫ Auto Down Feature .................... 2 7 ▫ W ind Buffeting ........................ 2 7 m Liftgate — Coupe M[...]
-
Page 12
m Break-In Recommendations ................. 5 6 m Safety T ips ............................ 5 7 ▫ Exhaust Gas .......................... 5 7 ▫ Safety Checks Y ou Should Make Inside The V ehicle .......................... 5 8 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle .................... 5 9 THINGS TO KNOW BEFORE ST ARTIN[...]
-
Page 13
A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer or a locksmith. Ask your dealer for these numbers and keep them in a safe place. Ignition Key [...]
-
Page 14
NOTE: The Power Accessory Delay feature allows you to operate the radio and the power windows for 2 minutes after turning off the ignition switch. Removing the key from the ignition switch and opening the driver’s door will cancel this feature. Y our dealership can enable or disable the Power Accessory Delay feature as desired. Key-In-Ignition Re[...]
-
Page 15
Keyless Entry (RKE) transmitter . After the last door is closed, or if all doors are closed, the system will arm itself in approximately 16 seconds. During the arming pr ocess, the V ehicle Security Alarm Indicator light will flash at a fast rate. Once the system is armed, the light will flash once every 6 seconds. NOTE: • The system will not can[...]
-
Page 16
Press the T runk button on the RKE transmitter to allow access without triggering the alarm or having to disarm the system. The trunk lid will pop open. Entering the liftgate with the System Armed — Coupe: NOTE: Using the key to open the liftgate while the system armed will trigger the alarm. Press the Liftgate button on the RKE transmitter to al[...]
-
Page 17
• Press the UNLOCK button on the RKE transmitter . The front and r ear park lights and the turn signal lights will flash to acknowledge the signal. NOTE: The vehicle will not start unless the V ehicle Security Alarm System is disarmed by either method. Inserting the key in the ignition WILL NOT disarm the system. Furthermore, turning the ignition[...]
-
Page 18
REMOTE KEYLESS ENTR Y This system allows you to lock or unlock the doors, open the trunk/liftgate, or activate the panic alarm fr om distances up to about 23 feet (7 meters) using a hand held radio transmitter . The transmitter need not be pointed at the vehicle to activate the system. T o Unlock the Doors: Press and r elease the UNLOCK button on t[...]
-
Page 19
4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the transmitter while you are in the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. Flash Lights with[...]
-
Page 20
Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the transmitter . This feature can be turned on or turned off. T o change the current setting, proceed as follows: 1. Press the LOCK button on a programmed transmitter for at least 4 seconds, but no longer then 10 seconds. Then, press the UNLOCK[...]
-
Page 21
ON/RUN position. If not deactivated through the trans- mitter or the ignition switch, the alarm will turn off automatically after 3 minutes. Programming Additional T ransmitters NOTE: Y ou must have at least one programmed trans- mitter to perform this procedur e. If you do not have a programmed transmitter , contact your dealer for details. Use th[...]
-
Page 22
Battery Replacement The recommended r eplacement battery is 2016. This is a generic battery , readily available at local retail stor es. NOTE: • Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/per chlorate. • Do not touch the battery terminals that are on the back housing or the printed circuit boar d. [...]
-
Page 23
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o assemble the transmitter case, snap the two halves together . 4. T est the transmitter operation. General Information This transmitter complies with FCC rule[...]
-
Page 24
DOOR LOCKS W ARNING! Do not touch the exhaust pipe sill covers when entering or exiting your V iper . They can be hot enough to burn you. Observe the warning labels on each door closure panel. W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicl[...]
-
Page 25
Manual Door Lock The driver’s door can be locked or unlocked with the key . The door lock is located on the outside door panel beneath the mirror . Power Door Locks A power door lock switch is on each door trim panel. Use this switch to lock or unlock the doors. NOTE: T o prevent you fr om accidentally locking your keys in the vehicle, the power [...]
-
Page 26
Electronic Door Lock This vehicle is equipped with a virtual lock system. Input from the outside door handle is ignor ed if the vehicle is virtually locked. Door Lock Messaging The words “DOOR UNLOCKED” will flash in the odom- eter if one door is unlocked or will remain on steadily if both doors are unlocked. A door is considered unlocked if th[...]
-
Page 27
WINDOWS Power Windows The power window switches are located between the driver and passenger seats on the center tunnel bezel, just to the left of the parking brake. The switch on the left side controls the driver’s window and the switch on the right controls the passenger’s window . The power window switches are active when the ignition is in [...]
-
Page 28
Auto Down Feature Both windows have an auto down feature. Pr ess the window switch to the second detent, release, and the window will go down automatically . Press the switch a second time in either direction to stop the window . T o open the window to a desired position, pr ess and hold the window switch in the first detent. Release the switch whe[...]
-
Page 29
LIFTGA TE — COUPE MODELS ONL Y The liftgate can be unlocked or locked by the Remote Keyless Entry (RKE) transmitter or by activating either of the power door lock switches located on the door trim panels. T o unlock the liftgate with the RKE transmitter , press the LIFTGA TE button on the transmitter for at least one second. The park lights and t[...]
-
Page 30
W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower swit[...]
-
Page 31
NOTE: Gas props support the tr unk lid in the open position. However , because the gas pressur e drops with temperature, it may be necessary to assist the pr ops when opening the trunk lid in cold weather . TRUNK SAFETY W ARNING — CONVERTIBLE MODELS ONL Y W ARNING! Do not allow children to have access to the trunk, either by climbing into the tru[...]
-
Page 32
OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the seat belts and the airbags for the driver and passenger . Please pay close attention to the information in this section. It explains how to use your restraint system properly to keep you and your passenger as safe as possibl[...]
-
Page 33
W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be injured seriously or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat[...]
-
Page 34
3. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 4. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , po[...]
-
Page 35
5. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a little on the shoulder belt, as shown. 6. T o loosen the lap belt if it is too tight, lift up on the shoulder belt and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap b[...]
-
Page 36
8. T o release the belt, push the red button in the buckle. The belt will retract automatically to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , checking [...]
-
Page 37
Enhanced Seat Belt Reminder System (BeltAlert T ) If the driver does not buckle their seat belt and vehicle speed exceeds 5 mph (8 km/h), or if the passenger does not buckle their seat belt within 10 seconds of vehicle speed exceeding 5 mph (8 km/h), the Enhanced W arning System (Belt Alert) will alert the occupant(s) to buckle their seat belt(s). [...]
-
Page 38
NOTE: W atch for the Seat Belt Reminder light to turn on while unbuckling the seat belt and turn off while r e- buckling the seat belt. It may be necessary to retract the seat belt. 6. T urn the ignition switch to the OFF/LOCK position. A single chime will sound to signify that you have com- pleted the programming successfully . The Enhanced W arni[...]
-
Page 39
NOTE: Once the belt is in automatic locking mode, you will not be able to pull any more of the webbing out of the retractor . In this mode, you will only be able to retract excess webbing into the retractor to secur e the child restraint. How T o Disengage The Automatic Locking Mode Simply allow all of the webbing to retract back into the retractor[...]
-
Page 40
Seat Belts and Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap portion of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdo[...]
-
Page 41
Driver and Passenger Supplemental Restraint System (SRS) - Airbag This vehicle is equipped with airbags for the driver and passenger as a supplement to the seat belt restraint systems. The driver airbag is mounted in the steering wheel. The passenger airbag is mounted underneath a cover in the passenger’s side of the instrument panel. The words S[...]
-
Page 42
The airbags work with the instrument panel knee bolsters and the seat belts to provide impr oved protection for the driver and passenger . While the seat belts are designed to protect the driver and passenger in many types of collisions, the airbags will deploy in moderate to severe frontal collisions. However , even in collisions where the airbags[...]
-
Page 43
5. Never allow a child to place the shoulder belt behind them or under the arm. 6. Never allow a child to lean forward toward the instrument panel as a passenger airbag deployment could cause severe injury or death to a child in this position. 7. For a child from 1 to 12 years old: Move the passenger seat as far back as possible. For a child from 2[...]
-
Page 44
• Steering Wheel and Column • Instrument Panel • Seat T rack Position Sensors • Interconnecting W iring • Seat Belt Reminder Light • Knee Impact Bolsters • Front Acceleration Sensors • Passenger Seat Occupant Classification System (OCS) − Occupant Classification Module (OCM) − Passenger Airbag Disabled (P AD) Indicator Light −[...]
-
Page 45
The ORC turns on the Airbag warning light and Passenger Airbag Disable (P AD) indica- tor light for 6 to 8 seconds as a self-check when the ignition is first turned on. After the self-check, the Airbag warning light will turn off and the P AD indicator light will function normally (Refer to “Passenger Airbag Disable (P AD) Indicator Light” in t[...]
-
Page 46
• The Knee Impact Bolsters help protect the knees of the driver and the passenger , and position everyone for the best interaction with the airbags. • The Occupant Classification Module (OCM) is lo- cated underneath the passenger seat. The OCM uses input from the Flex Mat to classify the occupant in the passenger seat into a size category . The[...]
-
Page 47
who is seated properly in the passenger seat. The driver and passenger should always use the P AD indicator light as an indication that the passenger is positioned properly in their seat. If the P AD indicator light comes on when an adult or teenager is in the passenger seat, have the passenger reposition their self in the seat until the light goes[...]
-
Page 48
may not classify the occupant properly . Furthermore, objects lodged under the seat can prevent the occu- pant’s weight from being measur ed properly and may result in the occupant being classified impr operly . The passenger seat assembly contains critical compo- nents that affect passenger airbag deployment. Corr ectly functioning passenger sea[...]
-
Page 49
W ARNING! Unapproved modifications or service procedures to the passenger seat assembly , its related components, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the passenger if the vehicle is involved in an accident. A modified vehicle may not comply with req[...]
-
Page 50
for airbag inflation. These airborne particles may irri- tate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, move to fr esh air . If the irritation continues, see your doctor . If these particles settle on your clothing, follow the garment manufacturer’s in- str[...]
-
Page 51
NOTE: Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/per chlorate. Airbag W arning Light Y ou will want to have the airbags ready for your protection in a collision. While the airbag system is designed to be maintenance free, if any of the following occurs, have an autho- rized dealer service the system im[...]
-
Page 52
There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safety belt. Always check the child seat Owner’s Manual to ensure you have the corr ect seat for your child. Use the restraint that is corr ect for your child: Infant and Child Restraints • Safety experts recommend t[...]
-
Page 53
who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year . These child seats are also held in the vehicle by the lap/shoulder belt. The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the[...]
-
Page 54
Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it. • The restraint[...]
-
Page 55
3. Remove the child tether access cover by prying either side with a screwdriver or similar tool, as shown. NOTE: While the child tether is in use, keep the access cover in a safe place so that it can be replaced after use of the child tether . 4. Pass the child restraint tether hook through either opening in the seatback underneath the head restra[...]
-
Page 56
7. Return the seatback to an upright position. 8. Install the child restraint according to the manufactur - er’s directions. 9. Remove slack from the tether strap according to the child restraint manufactur er’s directions. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use o[...]
-
Page 57
4. T ighten the lap portion of the belt and allow the excess webbing to retract back to the r etractor . If it still does not make the child restraint secur e, then secure the child restraint with the Child Restraint T ether Anchor . NOTE: Once the belt is in automatic locking mode, you will not be able to pull any more of the webbing out of the re[...]
-
Page 58
• A void excessive idling. • Check the engine oil level at every fuel fill. NOTE: A new engine will consume some oil during the first few thousand miles of operation. This should be considered as a normal part of the br eak-in and not interpreted as a sign of dif ficulty . SAFETY TIPS Exhaust Gas Do not run the engine in a closed garage or in c[...]
-
Page 59
W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO) follow the safety tips below . Safety Checks Y ou Should Make Inside the V ehicle Seat Belts Inspect the belt system periodically , checking for [...]
-
Page 60
Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tr ead wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tr ead and side wall for cuts and cracks. Check the wheel nuts for tightness. Check the tires for pr oper pressur e. Lights Have someon[...]
-
Page 61
[...]
-
Page 62
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Convertible T op Operation — Convertible Models Only ........................... 6 3 ▫ T o Lower The T op ...................... 6 3 ▫ T o Raise The T op ...................... 6 4 ▫ Convertible T op Boot Cover Installation – If Equipped ............................ 6 7 ▫ Convertib[...]
-
Page 63
▫ Daytime Running Lights ................. 8 2 ▫ Lights-On Reminder .................... 8 2 ▫ Battery Saver Feature — Exterior Lights ...... 8 2 ▫ Fog Lights ........................... 8 2 ▫ T urn Signals .......................... 8 2 ▫ Highbeam/Lowbeam Select Switch .......... 8 3 ▫ Flash T o Pass ......................... 8 4 ?[...]
-
Page 64
CONVERTIBLE TOP OPERA TION — CONVERTIBLE MODELS ONL Y W ARNING! The convertible top does not provide the structural protection that a reinforced metal roof does, and the fabric top cannot be expected to prevent the ejection of the occupants of a vehicle in a collision. Therefore, it is important that all occupants wear their seat belts at all tim[...]
-
Page 65
3. Depress the button located at the top of the latch and then pull the latch handle downward and r earward. 4. Disengage the latch hook from the windshield receiver rod and then pull the latch all the way back to the detent stow position. 5. Pull the convertible top away from the windshield header . 6. Raise both sun visors if so desired. 7. Open [...]
-
Page 66
4. Press downward on the convertible top and then pr ess the lever behind the driver seat to release the downstack latch. 5. Manually raise the convertible top until it meets the windshield header . 6. Close the trunk. Convertible T op Latch Raising Convertible T op UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 65 3[...]
-
Page 67
7. From inside the vehicle, grasp the handles and pull the convertible top toward the windshield header . Then, push the latch handle forward so that the latch hook engages the windshield receiver r od. 8. Ensure that the outboar d locating pins are in their respective r eceiving holes in the windshield header and then push the latch handle forward[...]
-
Page 68
NOTE: Until the convertible top system has had ad- equate time to break-in, it may take a gr eater effort to engage the latch hook and close the latch. However , several weeks of normal convertible top usage will reduce these ef forts. 9. Raise both sun visors if so desired. 10. Adjust the windows as desired. Convertible T op Boot Cover Installatio[...]
-
Page 69
4. Slide the boot cover pocket over the front corner of the convertible top on the driver side of the vehicle. Then, stretch and slide the boot cover pocket over the fr ont corner of the convertible top on the passenger side of the vehicle. 5. T uck the boot cover underneath the leading edge of the convertible top. Attaching Passenger Side T ucking[...]
-
Page 70
6. On the passenger side of the vehicle, clip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 7. Push downward on the boot cover pocket to engage the inboard tab. Attaching Passenger Side T ab Engaging Passenger Side T ab UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 69 3[...]
-
Page 71
8. On the driver side of the vehicle, clip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 9. Push downward on the boot cover pocket to engage the inboard tab. 10. Push downward on the boot cover behind driver seat to lock down the boot cover . Attaching Driver Side T ab Engaging Driver Side T ab 70 UNDERST ANDIN[...]
-
Page 72
1 1. Stretch and smooth out the boot cover fr om the rear of vehicle. 12. Close the trunk. 13. Ensure that the forward edge of the boot cover is tucked in fully . Stretching and Smoothing Cover Forward Edge UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 71 3[...]
-
Page 73
Convertible T op Boot Cover Removal and Storage 1. Open the trunk. 2. On the driver side of the vehicle, pull upward on the boot cover to disengage the inboard tab. 3. Unclip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. Disengaging Driver Side T ab 72 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]
-
Page 74
4. On the passenger side of the vehicle, pull upward on the boot cover to disengage the inboard tab. 5. Unclip the tab under the trunk lid stop and on the outer edge of the quarter panel flange. 6. Slide the boot cover pockets off the front corners of the convertible top. Disengaging Passenger Side T ab UNDERST ANDING THE FEA TURES OF YOUR VEHICLE [...]
-
Page 75
7. Fold the outer edges of the boot cover inward. 8. Fold the boot cover again. 9. Place the boot cover into the bag and store it in the trunk or a secur e dry area. 10. Close the trunk. Folding Outer Edges Folding Boot Cover 74 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]
-
Page 76
MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A pivot system allows for horizontal and verti- cal mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjusted while set in t[...]
-
Page 77
W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger sid[...]
-
Page 78
NOTE: When not in use, return the power mirr or switch to the neutral (off) position to pr event accidental mirror movement. SEA TS Manual Seat Adjustments Forward & Rearward Adjustment The adjusting bar is at the front of the seat, near the floor . Pull the bar upward to move the seat forwar d or rear - ward. Release the bar once the seat is i[...]
-
Page 79
W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]
-
Page 80
TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. First, reach into the lower right grille opening and pull the primary hood latch forward. Next, raise the front of the hood slightly and push the safety catch handle to the right. The safety catch handle is located under the front edge of the hood. Hood Release Lever Hood Sa[...]
-
Page 81
NOTE: Assist props will raise the hood to a normal usage position. If greater access is r equired, the hood may be pushed up at the front, raising the hood beyond the initial opening height. CAUTION! Do not leave the hood open in areas where strong gusts of wind are likely . Such a place might be by the side of the road where large trucks pass by .[...]
-
Page 82
LIGHTS Exterior & Interior Lighting Control The Multi-Function Lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, front fog lights, instrument panel lights, and interior lights. Headlights & Parking Lights T urn the end of the Multi-Function Lever to the first detent f[...]
-
Page 83
This feature can be disabled at the dealership, if so desired. Daytime Running Lights The fog lights will come on as Daytime Running Lights, whenever the ignition switch is on, the headlights are of f, and the parking brake is off. The headlight switch must be used for normal night time driving. NOTE: This feature is standar d on all Canadian vehic[...]
-
Page 84
Y ou can also signal a lane change by moving the lever partially upward or downwar d without moving beyond the detent. The turn signals will continue to operate until you release the lever . If either light has a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest [...]
-
Page 85
Flash to Pass Y ou can signal another vehicle with your headlights by lightly pulling the Multi-Function Lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased. Interior Lights The interior lights will turn on whenever a door is opened or the liftgate is opened (Coupe models) and the dimm[...]
-
Page 86
Courtesy lights are also found in the driver’s foot well, the passenger’s foot well, and in the liftgate on Coupe models. Y ou can turn this light on and off from the dimmer control in the Multi-Function Lever . This light is also controlled automatically by the illuminated entry system. Battery Saver Feature — Interior Lights T o protect the[...]
-
Page 87
Instrument Panel Dimming W ith the parking lights or headlights on, rotate the dimmer contr ol upward to increase the brightness of the instr u- ment panel lights or rotate it down- ward to decr ease the brightness of the instrument panel lights. Interior Light (ON) Rotate the dimmer control completely upward to the second detent to turn on the int[...]
-
Page 88
WINDSHIELD WIPERS AND W ASHERS The W indshield W iper/W asher Control Lever is on the right side of the steering column. From the “OFF” position, push the W indshield W iper/ W asher Control Lever upwar d to the first detent past the intermittent “DEL” setting for Low-speed wiper opera- tion, or to the second detent past the intermittent ?[...]
-
Page 89
the W indshield W iper/W asher Control Lever upwar d to the first detent “DEL” position, and then rotate the end of the lever to select the desired delay interval. Ther e are seven delay settings, which allow you to regulate the wipe interval from a minimum of one cycle every second to a maximum of approximately 15 seconds between cycles. Rotat[...]
-
Page 90
Adding W asher Fluid The windshield washer fluid reservoir is located in the front of the engine compartment on the passenger side of the vehicle. Be sure to check the fluid level in the reservoir at r egular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out [...]
-
Page 91
W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving. ADJUST ABLE PEDALS This feature allows the driver to move the brake and accelera[...]
-
Page 92
T o adjust the pedals: 1. Adjust the seat and steering column to a comfortable position. 2. Either press the adjustable pedal switch forward to move the pedals forward (towar d the front of the ve- hicle), or pull the switch rearwar d to move the pedals rearwar d (toward the r ear of the vehicle). NOTE: • Always adjust the pedals to a position th[...]
-
Page 93
Adjustable Foot Rest This feature allows the driver to adjust the foot r est forward or backwar d and to rotate it upwar d or down- ward to allow for gr eater driving comfort. T o adjust the pedal: 1. Adjust the seat and steering column to a comfortable position. 2. Using a 13 mm socket wrench, loosen the nut on the pedal. 3. Slide the pedal either[...]
-
Page 94
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel Featur es .................. 9 5 m Instrument Cluster Description .............. 9 6 ▫ Speedometer .......................... 9 6 ▫ Message Center ....................... 9 7 ▫ Gauges & Indicator Lights ............... 1 0 3 m Setting The Digital Clock ................. 1 0[...]
-
Page 95
▫ Notes On Playing MP3 Files ............. 1 1 4 ▫ Operation Instructions - (CD Mode For MP3 Audio Play) ..................... 1 1 6 m Satellite Radio — If Equipped .............. 1 1 7 ▫ System Activation ..................... 1 1 8 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .................... 1 1 8 ▫ Selecting[...]
-
Page 96
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 7 — Speedometer/Odometer 13 — Climate Control 2 — Sound System Speaker 8 — Oil Pressur e Gauge 14 — Engine Start Button 3 — Main Message Center 9 — Passenger Airbag Off Light 15 — V oltage Gauge 4 — Fuel Gauge 10 — Passenger Airbag 16— Engine Coolant T emperature Gauge 5 — Auxilia[...]
-
Page 97
INSTRUMENT CLUSTER DESCRIPTION Speedometer Shows the vehicle’s speed in miles- per-hour (mph) and kilometers-per - hour (km/h). Odometer/T rip Odometer The odometer shows the total distance the vehicle has been driven. NOTE: U.S. federal regulations r equire upon transfer of vehicle ownership, the seller certify the mileage the vehicle has been d[...]
-
Page 98
• The word “DECK” will flash in the display if the trunk/liftgate is open. • The words “LOW TIRE” will flash slowly in the display and a chime will sound if the tire pr essure is low . • The words “FLA T TIRE” will flash rapidly in the display and a chime will sound if critically low tire pressur e is detected. Message Center When[...]
-
Page 99
standard non-anti-lock brakes. If this occurs, safely bring the vehicle to a complete stop as soon as possible and cycle the ignition key to attempt to reset the ABS. If the light remains on, see your authorized dealer immediately to have the system serviced. Furthermore, if the r ed BRAKE warning light and the amber ABS warning light are on, and t[...]
-
Page 100
CAUTION! Prolonged driving with the light on could cause further damage to the emission control system. It could also affect fuel economy and driveability . The vehicle must be serviced before any state emissions tests can be performed. T urn Signal Indicators The left or right arrow will flash in unison with the corresponding fr ont and rear turn [...]
-
Page 101
NOTE: The light will turn on when the ignition switch is in the ON/RUN position and the parking brake is applied. This light shows only that the parking brake is applied. It does not show the degree of brake application. W ARNING! Driving a vehicle with the brake light on is danger- ous. Part of the brake system has failed. It will take longer to s[...]
-
Page 102
Low T ire Pressure T elltale / TPMS Malfunction Indicator Each tire, including the spar e (if provided), should be checked monthly when cold and inflated to the inflation pressur e recommended by the vehicle manufacturer on the vehicle placard or tir e inflation pressur e label. (If your vehicle has tires of a dif ferent size than the size indicate[...]
-
Page 103
upon subsequent vehicle start-ups as long as the mal- function exists. When the malfunction indicator is illumi- nated, the system may not be able to detect or signal low tire pr essure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tir es or wheels on the vehicle that preve[...]
-
Page 104
W ARNING! Do not exceed 55 mph (88 km/h) if the LOW T ire indicator is activated. V ehicle handling and braking may be reduced. Y ou could have an accident and be severely or fatally injured. Seat Belt Reminder Light If the driver does not buckle their seat belt and vehicle speed exceeds 5 mph (8 km/h), or if the passenger does not buckle their sea[...]
-
Page 105
6000 RPM. This serves as a visual aid to shift before reaching the r ed line. This warning will turn off when the tachometer pointer falls below 5900 RPM. (See page 136 for more information.) Coolant T emperature Gauge This gauge shows the engine coolant tempera- ture. The gauge pointer will likely show higher temperatures when driving in hot weath[...]
-
Page 106
between 20 and 80 psi (pounds per square inch). If the pointer remains in the r ed range, safely bring the vehicle to a complete stop and turn off the engine. DO NOT operate the vehicle until the cause is corrected. This gauge does not indicate the amount of oil in the engine. The engine oil level must be checked under the hood. Check the level oft[...]
-
Page 107
Charge System Light The red Char ge System Light is located in the V oltage Gauge. It will turn on when there is a charging system malfunction or a possible accessory drive belt failure. CAUTION! The accessory belt also drives the water pump. Op- erating the vehicle with a failed belt can cause engine overheating and possible severe engine damage. [...]
-
Page 108
you understand and save you concern about these “ap- parent” malfunctions, you must understand a point or two about the transmission and reception of radio sig- nals. T wo T ypes of Signals There ar e two basic types of radio signals: AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves [...]
-
Page 109
SALES CODE RAH — AM & FM STEREO RADIO WITH CD PLA YER AND CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Radio Operation Power/V olume Control Press the ON/VOL contr ol to turn the radio on. T urn the volume control clockwise to incr ease the volume. NOTE: Power to operate the rad[...]
-
Page 110
Program T ype Radio Display Adult Hits Adult Hit Classical Classical Classic Rock Classic Rock College College Country Country Information Inform Jazz Jazz Foreign Language Language News News Nostalgia Nostalgia Oldies Oldies Personality Personality Public Public Rhythm and Blues R & B Religious Music Religious Music Religious T alk Religious T[...]
-
Page 111
no station is found with the selected PTY pr ogram type, the radio will return to the last pr eset station. If a preset button is activated while in the PTY (Program T ype) mode, the PTY mode will be exited and the radio will tune to the preset station. Mode Press the MODE button to select between, AM, FM, CD, CD/DVD changer or the Satellite Radio [...]
-
Page 112
T one Control The Bass and/or T reble contr ols sound for the desired tone. Press the AUDIO button, select Bass or TREBLE, then press SEEK + or SEEK 2 to incr ease or decrease amplification of the band. T o Set The Radio Push-Button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET button. SET 1 [...]
-
Page 113
NOTE: Changes or modifications not expressively ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. CD Player Operation NOTE: • The ignition switch must be in the ON or ACC position and the volume control ON befor e the CD player will operate. • This Radio is capable of playing compact[...]
-
Page 114
Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first 10 seconds of the current selection. EJT — Eject Press the EJT button and the disc will unload and move to [...]
-
Page 115
CD/DVD Changer Operation Press the MODE button to select between the CD player and the optional remote CD/DVD changer . T ime Press the TIME button to change the display fr om elapsed CD or DVD playing time to time of day . Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recor ding media and formats are limite[...]
-
Page 116
CD audio tracks and computer files (including MP3 files). Discs created with an option such as 9 keep disc open after writing 9 are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 file formats The radio will recognize only files with the *.mp3 exten- sion as[...]
-
Page 117
Playback of MP3 files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]
-
Page 118
R W/FF (CD Mode For MP3 Play) Press the FF side of the button to move forwar d through the MP3 selection. Press the R W side of the button to move back through the MP3 selection. AM/FM Button (CD Mode For MP3 Play) Switches back to Radio mode. RND Button (CD Mode For MP3 Play) Pressing this button plays files randomly . DIR Button (CD Mode For MP3 [...]
-
Page 119
System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of SIRIUS audio service that is included with the factory- installed satellite radio system in your vehicle. Sirius will contact you to supply a welcome kit and to confirm subscription information, including the set up of your [...]
-
Page 120
The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed. ESN/SID Access W ith RBP , RBU, RAZ, RB1 and RBQ Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds. All[...]
-
Page 121
Selecting a Channel Press and r elease the SEEK or TUNE buttons to search for the next channel. Press the top of the button to sear ch up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released. Press and r elease the SCAN button (if equipped) to automatically change chan[...]
-
Page 122
one and stop the search. Pr essing a pre-set memory button during a music type scan, will call up the memory channel and stop the search. PTY Button ( SEEK ( When the desired pr ogram is obtained, press the 9 SEEK 9 button within five seconds. The channel will change to the next channel that matches the program type selected. Satellite Antenna T o [...]
-
Page 123
RADIO ANTENNA The radio antenna is located in the windshield. CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper , paper CD la[...]
-
Page 124
Air Conditioning and Heating System Blower Control Use this control to r egulate the amount of air forced thr ough the sys- tem in any mode you select. T urn the control clockwise to incr ease fan speed. T urn the control to th eO—O f f position to shut off the fan and to prevent any outside air fr om entering the vehicle. This also turns off the[...]
-
Page 125
Mode Control Use this control to select the dir ection of air flow . NOTE: The dot between the mode control icons is a mix position between the two modes. The mode settings are as follows: • Recirculation Contr ol Air is recir culated inside the vehicle. Y ou may choose between Bi-Level and Panel air outlets while in this mode. Use this mode to t[...]
-
Page 126
• Defrost/Floor Air is directed thr ough the windshield defrost and the floor outlets. This setting works best in cold or snowy conditions that requir e extra heat at the windshield. This setting is good for maintaining comfort while reducing moistur e on the windshield. • Defrost Air is directed thr ough the windshield defrost outlet. Use this[...]
-
Page 127
Operating Tips NOTE: Refer to the chart at the end of this section for suggested control settings for various weather condi- tions. Summer Operation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifr eeze coolant to provide pr oper corrosion pr otection and to protect against engine overheating. A 50%[...]
-
Page 128
W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide suf ficient heating. If side win- dow fogging becomes a problem incr ease blower speed. V ehicle windows tend to fog on the inside in mild but rainy or hum[...]
-
Page 129
REAR WINDOW FEA TURES Electric Rear Window Defroster The electric Rear W indow Defroster Control is located on the climate control. Pr ess this button to turn on the rear window defr oster . A light above the button will illuminate when the rear window defr oster is ON. The defroster automatically turns of f after approxi- mately 15 minutes of oper[...]
-
Page 130
ST ARTING AND OPERA TING CONTENTS m Starting Procedur es ..................... 1 3 2 ▫ Normal Starting ...................... 1 3 3 ▫ If Engine Fails T o Start ................. 1 3 5 ▫ After Starting ........................ 1 3 6 m T ransmission Shifting .................... 1 3 6 ▫ Recommended Shift Speeds .............. 1 3 8 ▫ Skip S[...]
-
Page 131
m T ire Safety Information ................... 1 4 9 ▫ T ire Markings ........................ 1 4 9 ▫ T ire Identification Number (TIN) .......... 1 5 2 ▫ T ire Loading And T ire Pressur e ........... 1 5 3 m T ires — General Information ............... 1 5 7 ▫ T ire Pressur e ......................... 1 5 7 ▫ T ire Inflation Pressur e[...]
-
Page 132
▫ Fuel System Cautions .................. 1 7 0 ▫ Carbon Monoxide W arnings .............. 1 7 1 m Adding Fuel .......................... 1 7 1 ▫ Fuel Filler Cap (Gas Cap) ............... 1 7 1 m V ehicle Loading ........................ 1 7 3 m T railer T owing ......................... 1 7 4 m Recreational T owing (Behind Motorhome, Etc.) .[...]
-
Page 133
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct any other occupant to buckle their seat belt. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or ot[...]
-
Page 134
CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures, which can damage your vehicle. Do not leave your vehicle unattended with the engine running. Normal Starting NOTE: • Y ou must disarm the security system in order to start the engine. For details, refer to “Security Alarm Sys- t[...]
-
Page 135
5. T urn the key to the ON/RUN position. 6. Press the red ENGINE ST AR T button located on the instrument panel. Release the button when the engine starts. Ignition Key Positions Engine Start Button 134 ST ARTING AND OPERA TING[...]
-
Page 136
If Engine Fails to Start CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. W ARNING! • Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing ser[...]
-
Page 137
If the engine is flooded, it may start to run, but not have enough power to continue running when the start button is released. If this occurs, continue cranking up to 15 seconds with the accelerator pedal pushed all the way to the floor . Release the accelerator pedal and the start button once the engine is running smoothly . If the engine shows n[...]
-
Page 138
Be sure the transmission is in FIRST gear when moving forward fr om a standing position. CAUTION! Failure to start out in FIRST gear when moving forward from a starting position may result in dam- age to the clutch. Y ou will find it easier to use only the lower gears for most city driving. For steady highway driving with light accelerations, 6th g[...]
-
Page 139
driving. The noise may also be more noticeable when the transmission is warm. This noise is normal and is not an indication of a problem with your clutch or transmission. Recommended Shift Speeds T o use your manual transmission for fuel economy it should be upshifted as listed below . Shift at the vehicle speeds listed for acceleration. Earlier up[...]
-
Page 140
T o maintain a safe speed and prolong brake life, down- shift to maintain a safe speed when descending a steep grade. W ARNING! Skipping more than one gear while downshifting, could cause you to lose control of your vehicle. Y ou could have an accident. CAUTION! If you skip more than one gear while downshifting or downshift at too high an engine sp[...]
-
Page 141
T raction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and r oad surface. This is hydroplaning and may cause partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precautions should be observed: 1. Slow down during rainstorms or when ro[...]
-
Page 142
Flowing/Rising W ater W ARNING! Do not drive on or cross a road or a path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly . Failure to follow this warn[...]
-
Page 143
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances. Therefore, after driving through standing water , drive slowly and[...]
-
Page 144
drops into the handle (r eleasing the lock), guide the handle downward to its stop and then r elease the button and the handle. The Brake System W arning Light in the instrument cluster will turn on when the ignition is in the ON/RUN position and the parking brake is applied. NOTE: This light only shows that the parking brake is applied. It does no[...]
-
Page 145
BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. However , there will be some loss of overall braking effectiveness. Y ou may notice increased pedal travel during application, gr eater pedal force r equired to slow or [...]
-
Page 146
Safe Operating T ips W ARNING! T o use your brakes and accelerator more safely , follow these tips: • Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping distances, or brake damage. • When descending mountains or hills, repeated braking can ca[...]
-
Page 147
The Anti-Lock Brake System pump motor runs during the self-test at 12 mph (20 km/h) and during an ABS stop. The pump motor makes a low humming noise during operation, which is normal. CAUTION! The Anti-Lock Brake System is subject to possible detrimental effects of electronic interference caused by improperly installed after-market radios or teleph[...]
-
Page 148
All vehicle wheels and tires must be the same size and type as the original equipment and the tires must be properly inflated to pr oduce accurate signals for the computer . W ARNING! Significant over or under inflation of tires, or mixing sizes of front or rear tires or wheels on the vehicle can lead to loss of braking effectiveness. Anti-Lock Bra[...]
-
Page 149
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]
-
Page 150
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d ha[...]
-
Page 151
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds 9 ....blank.... 9 = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspe[...]
-
Page 152
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —The maximum speed corresponding to the Speed Symbol should only be achi[...]
-
Page 153
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If [...]
-
Page 154
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about: 1) the number of people that can be carried in the vehicle 2) the[...]
-
Page 155
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the T ire and Loading Information placard and in the “V ehicle Loading”[...]
-
Page 156
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs (295 kg) 5. Determine the c[...]
-
Page 157
156 ST ARTING AND OPERA TING[...]
-
Page 158
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]
-
Page 159
2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and r esults in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabili[...]
-
Page 160
check tire pr essure. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which co[...]
-
Page 161
T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressur e is very important. Increased tir e pressur e and reduced vehicle loading may be requir ed for [...]
-
Page 162
Tire Spinning When stuck in mud, sand, snow , or ice conditions, do not spin your vehicle’s wheels above 35 mph (55 km/h). Refer to the paragraph on “Freeing A Stuck V ehicle” in Section 6 of this manual. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire cou[...]
-
Page 163
Many states have laws requiring tir e replacement at this point. Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow th[...]
-
Page 164
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]
-
Page 165
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Th[...]
-
Page 166
aggressive tr ead designs such as those on all season type tires. Rotation will incr ease tread life, help to maintain mud, snow , and wet traction levels, and contribute to a smooth, quiet ride. Follow the “Maintenance Schedules” in Section 8 of this manual for the recommended tir e rotation fr equency for your type of driving. Remember , more[...]
-
Page 167
TIRE PRESSURE MONITOR SYSTEM (TPMS) Low Tire Indicator If tire pr essure falls below 20 psi (138 kpa), the Low T ire Pressur e T elltale in the Message Center will illuminate, a chime will sound, and the words LOW TIRE will flash slowly in the Liquid Crystal Display (LCD) panel in the bottom of the speedometer . If tire pr essure falls below 14 psi[...]
-
Page 168
W ARNING! Do not exceed 55 mph (88 km/h) if the LOW T ire indicator is activated. V ehicle handling and braking may be reduced. Y ou could have an accident and be severely or fatally injured. TPMS Malfunction W arning Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly . The T[...]
-
Page 169
FUEL REQUIREMENTS 8.4L Engine The 8.4L engine is designed to meet all emissions regulations and pr ovide excel- lent fuel economy and performance when using high-quality premium unleaded gasoline with an octane rating of 91 or higher . Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at hig[...]
-
Page 170
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are r equired in some ar eas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle. CAUTION! DO NOT use gasolines containing [...]
-
Page 171
Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of additional detergents or other additives ar e not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow the[...]
-
Page 172
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed ar ea, such as a garage, and never sit in a parked vehi[...]
-
Page 173
NOTE: • After removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor ce- ment. • When the fuel nozzle “clicks” or shuts off, the fuel tank is full. • The fuel tank filler tube has a restricting door about 2 inches (50 mm) inside the opening. If using a portable container to add fuel, it m[...]
-
Page 174
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground whi[...]
-
Page 175
TRAILER TOWING T railer towing with this vehicle is not recommended. RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Recreational towing for this vehicle is not r ecommended. NOTE: If the vehicle requir es towing, make sure all four wheels are of f the ground.[...]
-
Page 176
WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 1 7 6 m If Y our Engine Overheats ................. 1 7 6 m TIREFIT Kit ........................... 1 7 7 ▫ TIREFIT Storage ...................... 1 7 8 ▫ TIREFIT Usage Precautions .............. 1 7 8 ▫ TIREFIT Kit Components & Operation ...... 1 8 0 ▫ Se[...]
-
Page 177
HAZARD W ARNING FLASHER The flasher switch is on the top of the steering column, just behind the steering wheel. Depress the flasher button and all front and r ear directional signals will flash. Depress the flasher button again to turn off the flashers. Do not use this emergency warning system when the vehicle is in motion. Use it when your vehicl[...]
-
Page 178
• In city traffic — While moving, shift into the highest gear possible to reduce engine RPM. NOTE: There ar e steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the cooling system and turning off the A/C r emoves this heat. Y ou can also turn[...]
-
Page 179
TIREFIT Storage The TIREFIT kit is located in the trunk. TIREFIT Usage Precautions NOTE: • Replace the TIREFIT Sealant Bottle prior to the expi- ration date (printed on the bottle label) to assure optimum operation of the system. • When the TIREFIT Sealant is in a liquid form, clean water , and a damp cloth will remove the material fr om the ve[...]
-
Page 180
• Y ou can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles for inflating sport balls, rafts, or like inflatable items. However , use only the Black Air Pump Hose (6) and make sure the Mode Select Knob (4) is in the Air Mode when inflating such items to avoid injecting sealant into them. The TIREFIT Sealant i[...]
-
Page 181
W ARNING! • T ake care not to allow the contents of TIREFIT to come in contact with hair , eyes, or clothing. TIRE- FIT is harmful if inhaled, swallowed, or absorbed through the skin: It causes skin, eye, and respira- tory irritation. Flush immediately with plenty of water if there is any contact with eyes or skin. Change clothing as soon as poss[...]
-
Page 182
6. Air Pump Hose (Black) 7. Sealant Hose (Clear with Y ellow Cap) Using the Mode Select Knob & Hoses Selecting Air Mode T urn the Mode Select knob (4) to this position for air pump operation only . Use the Black Air Pump Hose (6) when selecting this mode. Selecting Sealant/Air Mode T urn the Mode Select knob (4) to this position to inject the T[...]
-
Page 183
(B) Setting Up to Use TIREFIT : T urn the Mode Select knob (4) to the Sealant/ Air Mode position. 1. Uncoil the Clear Sealant Hose (7) and then remove the Y ellow Cap from the fitting at the end of the hose. 2. Place the TIREFIT kit flat on the ground next to the deflated tire. 3. Remove the cap from the valve stem and then screw the fitting at the[...]
-
Page 184
• T urn the Mode Select knob to the Sealant/Air Mode. • Connect the Power Plug (5) to a differ ent power outlet in your vehicle or another vehicle, if available. Make sure the engine is r unning before turning on the TIREFIT kit. • The Sealant Bottle (1) may be empty due to previous use. Call for assistance. (D) After Injecting TIREFIT Sealan[...]
-
Page 185
W ARNING! TIREFIT is not a permanent flat tire repair . Have the tire inspected and repaired or replaced after using TIREFIT . Do not exceed 55 mph (90 km/h) until having the tire repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you. (F) After Securing T[...]
-
Page 186
5. Place the TIREFIT kit in its proper storage area in the vehicle. 6. Have the tire inspected and repair ed or replaced at the earliest opportunity at an authorized dealer or tire ser - vice center . 7. Replace the Sealant Bottle (1) at your nearest autho- rized Mopar t parts dealership as soon as possible. (G) Distributing TIREFIT Sealant to Bett[...]
-
Page 187
JUMP-ST ARTING PROCEDURES W ARNING! • T ake care to avoid the radiator cooling fans whenever the hood is raised. They can start anytime the ignition switch is on. Y ou can be hurt by the fans. • T ake care to avoid the accessory drive whenever the hood is raised. Y ou can be hurt by the moving components. • Do not attempt to push or tow your [...]
-
Page 188
5. Remove the plastic cover from the remote jump-start positive post (+) in the engine compartment. Refer to the following illustration for remote jump-starting connec- tions. 6. If you are jump-starting your vehicle, connect one end of a jumper cable to the positive (+) terminal on the booster battery . Connect the other end of the same cable to t[...]
-
Page 189
W ARNING! • Y ou should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze. Do not att[...]
-
Page 190
W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow , it[...]
-
Page 191
CAUTION! T owing with equipment other than flat bed types may damage your vehicle. 190 WHA T TO DO IN EMERGENCIES[...]
-
Page 192
MAINT AINING YOUR VEHICLE CONTENTS m 8.4L Engine Compartment ................ 1 9 4 m Onboard Diagnostic System (OBD II) ......... 1 9 5 m Emissions Inspection And Maintenance Programs ............................ 1 9 6 m Replacement Parts ...................... 1 9 7 m Dealer Service ......................... 1 9 8 m Maintenance Procedur es ......[...]
-
Page 193
▫ Battery Save Feature ................... 2 1 0 ▫ Air Conditioner Maintenance ............. 2 1 2 ▫ Power Steering — Fluid Check ............ 2 1 3 ▫ Front & Rear Suspension Ball Joints ........ 2 1 4 ▫ Steering Linkage ...................... 2 1 4 ▫ Body Lubrication ..................... 2 1 5 ▫ Body Mechanism Lubrication ....[...]
-
Page 194
m Replacement Bulbs ...................... 2 4 0 m Bulb Replacement ...................... 2 4 2 ▫ Auxiliary High Beam Headlight, Front Park/T urn Signal Light, Front Side Marker Light ........................ 2 4 2 ▫ High Intensity Discharge Headlights (HID) . . . 243 ▫ Front Fog Light ...................... 2 4 4 ▫ T aillight, T ail/Stop [...]
-
Page 195
8.4L ENGINE COMP ARTMENT 194 MAINT AINING YOUR VEHICLE[...]
-
Page 196
ONBOARD DIAGNOSTIC SYSTEM (OBD II) T o meet new government regulations and pr omote cleaner air , your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions and engine control systems. When these systems ar e operating prop- erly , your vehicle will provide excellent [...]
-
Page 197
EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states, which have an I/M (Inspection and Maintenance) requir ement, this check verifies the following: the MIL (Malfunction Ind[...]
-
Page 198
5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn of f the ignition key or start the engine. This means that your vehicle’s OBD system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all an[...]
-
Page 199
DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any procedur e yourself. NOTE: Intentional tampering wi[...]
-
Page 200
The best time to check the oil level is approximately 5 minutes after a fully warmed engine is turned off or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground also will improve the accuracy of the oil level r eadings. Add oil only when the level is below the SAFE mark. CAUTION! Overfilling [...]
-
Page 201
• More than 50% of your driving is at sustained high speeds during hot weather , above 90°F (32°C) • T railer towing • T axi, Police, or delivery service (commercial service) • Off-r oad or desert driving • If equipped for and operating with E-85 (ethanol) fuel NOTE: If ANY of these apply to you, then change your engine oil every 3,000 [...]
-
Page 202
The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine Com- partment” illustration in this section. Materials Added to Engine Oil The manufacture str ongly recommends against the addi- tion of any additives (other than leak detection dyes[...]
-
Page 203
quality filters should be used to assure most ef ficient service. Mopar t Engine Oil Filters are a high quality oil filter and are r ecommended. Drive Belts — Check Condition and T ension Belt tension is controlled by means of an automatic tensioner . Therefor e, no belt tension adjustments are requir ed. However , belt and belt tensioner conditi[...]
-
Page 204
Spark Plugs Spark plugs must fire pr operly to assure engine perfor - mance and emission control. New plugs should be in- stalled at the specified mileage. The entire set should be replaced if ther e is any malfunction due to a faulty spark plug. Malfunctioning spark plugs can damage the cata- lytic converter . Refer to “Fluids, Lubricants, and G[...]
-
Page 205
Fuel Filter The fuel filter is a part of the fuel module and it does not requir e maintenance. Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic con- verter will not requi[...]
-
Page 206
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming in contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine operati[...]
-
Page 207
NOTE: • Because of the plastic body shell on your vehicle, ignition cables should be replaced with the specially designed RFI cables available at your dealer . • The ignition timing cannot be set on this engine. Crankcase Emission Control System Proper operation of this system depends on fr eedom from plugging due to deposits. As vehicle mileag[...]
-
Page 208
Accessing The Battery Battery Location MAINT AINING YOUR VEHICLE 207 7[...]
-
Page 209
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. K[...]
-
Page 210
T o Service the Battery: 1. Remove the floor portion of the r ear compartment carpet to access the battery compartment. 2. Remove the battery cover mounting screws and re- move the battery cover . 3. Disconnect the negative battery cable from the battery . NOTE: The negative battery terminal is marked with a (-) symbol. The positive battery termina[...]
-
Page 211
Battery Save Feature The Battery Save feature conserves battery power when storing the vehicle. It allows for up to 3 months of storage time without losing radio and engine controller memory . Using this feature is an alternative to disconnecting the battery . NOTE: This vehicle is designed to sit in storage with a fully charged battery for up to 3[...]
-
Page 212
4. Remove the key from the ignition switch and exit the vehicle. The Battery Save Feature will be enabled 45 seconds after all doors are closed. NOTE: • T urning the ignition switch to the ON/RUN position at any time will cancel activation of the Battery Save Feature. • The remote keyless entry and the exterior passenger door handle will not wo[...]
-
Page 213
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. NOTE: If A/C performance seems less then n[...]
-
Page 214
Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar - bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by dealers or other service facilities using recovery and r ecycling equ[...]
-
Page 215
W ARNING! Overfilling the power steering fluid reservoir can result in spilling power steering fluid on hot engine parts and the power steering fluid catching fire. Front & Rear Suspension Ball Joints This vehicle has suspension ball joints that requir e peri- odic inspection and lubrication. Inspection The ball joints should be inspected whene[...]
-
Page 216
Lubrication The tie rod ends ar e lubricated for life. No periodic lubrication is requir ed. Body Lubrication Locks and all body pivot points, including seat tracks, doors hinges, trunk/liftgate hinges, and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against r ust and wear . Prior to the application[...]
-
Page 217
Multi-Purpose Lubricant NLGI Grade 2 or equivalent should be applied sparingly to all pivot and sliding contact areas. Other Body Mechanisms The following body mechanisms should be inspected and, if necessary , all pivot and sliding contact areas of these components should be lubricated with a smooth white body lubricant such as Mopar t Spray White[...]
-
Page 218
• Rubber bushings • Starter bearing • Throttle contr ol cable • W ater pump bearings Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner . This will remove accu- mulations of salt or road film. Operation of the wipers on dry[...]
-
Page 219
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if exhaust fumes can be detected inside the vehicle; or when the underside or side of the vehicle is damaged; have a competent technician inspect the com[...]
-
Page 220
Cooling System W ARNING! • When working near the radiator cooling fans, disconnect each fan motor lead or turn the ignition switch to the OFF position. The fans are tempera- ture controlled and can start any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you s[...]
-
Page 221
drain from the coolant r ecovery bottle. DO NOT RE- MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown on the “Maintenance Schedules” in this manual. If the solution is dirty or contains a considerable amount of sed[...]
-
Page 222
Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before r eplacement. T o prevent r educing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. [...]
-
Page 223
The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat caus[...]
-
Page 224
service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles (a few kilome[...]
-
Page 225
• Do not change the thermostat for summer or winter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. Hoses and V acuum/V apor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat [...]
-
Page 226
Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Recommended service intervals can be found in the “Maintenance Schedules” in this manual. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake [...]
-
Page 227
• Inspect the brake hoses whenever the brake system is serviced and at every engine oil change. Inspect hy- draulic brake hoses for surface cracking, scuffing, or worn spots. If there is any evidence of cracking, scuffing, or worn spots, the hose should be r eplaced immediately! Eventual deterioration of the hose can take place resulting in a pos[...]
-
Page 228
Use only the manufacturer’s r ecommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” for the correct fluid type. Use of a brake fluid that may have a lower initial boiling point or unidentified as to specifica- tion, may result in sudden brake failur e during hard prolonged braking. W ARNING! Overfilling the brake fluid rese[...]
-
Page 229
T ransmission T ransmission Fluid Level Check Check the fluid in the transmission when performing other underhood services. Check the fluid level by removing the fill plug located on the left side of the transmission. The fluid level should be at the bottom of the fill hole. Add fluid, if necessary , to maintain the proper level. Refer to the “Fl[...]
-
Page 230
Use only the manufacturer’s r ecommended clutch fluid. Refer to “Fluids, Lubricants, and Genuine Parts” for the correct fluid type. W ARNING! Overfilling the clutch fluid reservoir can result in spilling clutch fluid on hot engine parts and the clutch fluid catching fire. Use only clutch fluid that has been in a tightly closed container to av[...]
-
Page 231
Rear Axle Axle Lubricant Level Check Check the exterior of the axle for evidence of gear oil leakage every 12 months or 6,000 miles (10 000 km). This check should be made with the vehicle level and sup- ported by the suspension, with the vehicle on the ground or raised on an axle and wheel type hoist. The axle lubricant level should be between the [...]
-
Page 232
In the event that you do take this vehicle to a commercial car wash, move the Heater/Air Conditioning blower control to the lowest setting. This will pr event the possi- bility of water entering the system. CAUTION! The tires on this vehicle are wider than the guide tracks on most washes and the low ground clearance of this vehicle may not be compa[...]
-
Page 233
Convertible T op Care — Convertible Models Only Use a mild detergent to clean the top. A void heavy scrubbing and rinse with plenty of clean water . Allow to dry thoroughly befor e storage. Underbody Maintenance The corrosive materials used for ice and snow r emoval or dust control may accumulate on the underbody of your vehicle. If not removed, [...]
-
Page 234
NOTE: Never scrape the windows with squeegees, razor blades, or other sharp instruments. • Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If using soap, wipe clean with a clean damp rag or chamois cloth. • Dry with a soft tissue. Leather or V inyl Seat/T rim Care and Cleani[...]
-
Page 235
FUSES (POWER DISTRIBUTION CENTERS) Fuses (Power Distribution Center) A power distribution center is located in the engine compartment on the driver’s side of the vehicle. This center contains fuses and relays. Cavity Car- tridge Fuse Mini Fuse Description 1 40 Amp Green — Blower Motor 2 40 Amp Green — Anti-Lock Brakes (ABS) Pump Feed/Starter [...]
-
Page 236
Cavity Car- tridge Fuse Mini Fuse Description 8 30 Amp Pink — Ignition Switch Run/ Accessory Feed 9 40 Amp Green — Headlights 10 30 Amp Pink — Ignition Switch Run Feed 1 1 — 20 Amp Y ellow Auto Shutdown Relay (ASD) 12 — 20 Amp Y ellow Cigar Lighter 13 — 15 Amp Blue Hazard Flasher 14 — 20 Amp Y ellow Auto Shutdown Relay (ASD) 15 — 20[...]
-
Page 237
Cavity Car- tridge Fuse Mini Fuse Description 62, 63 — 15 Amp Blue Gauges 64, 65 — 10 Amp Red Airbag 66, 67 — 20 Amp Y ellow W iper Switch 68, 69 — 20 Amp Y ellow Left HID Headlight 70, 71 — 20 Amp Y ellow Right HID Headlight CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- er[...]
-
Page 238
Fuses (Mini-Power Distribution Center) A mini-power distribution center is located in the engine compartment on the passenger’s side of the vehicle. This center contains radiator fan control r elays and has two externally-mounted 40 Amp fuses for the radiator fans. CAUTION! • When installing the Mini-Power Distribution Center cover , it is impo[...]
-
Page 239
VEHICLE STORAGE W e recommend that you follow these guidelines for storing your vehicle for extended periods. • Fill the fuel tank. This will prevent water condensation inside the tank. If you plan to store your vehicle mor e than 2 months, add an anti-oxidant fuel stabilizer to the fuel tank. • Change the oil to remove any corr osive combustio[...]
-
Page 240
Then, either disconnect the battery at the negative terminal or use the “Battery Save Feature” to conserve battery power . Refer to “Battery Save Feature” under “Maintenance Procedur es” in this section for details. NOTE: Disconnecting the battery causes the engine control system to lose memory of some “learned” func- tions. After r[...]
-
Page 241
NOTE: T o help prevent the battery fr om discharging during shorter periods of inactivity , perform the follow- ing: 1. Make sure that the trunk/liftgate, hood, doors, win- dows, and convertible top are completely closed. 2. Make sure that remote transmitter is operating and that the battery is good. 3. Make sure that the hood, trunk/liftgate, and [...]
-
Page 242
LIGHT BULBS — Exterior (Convertible Models) Bulb Number Low/High Beam High Intensity Discharge (HID) Headlight .... S e r viced at dealer only Auxiliary High Beam Headlight ...... (HB3A) 9005XS Front Park/T urn Signal Light ............. 3157AK Fog Light ....................... (H10 U) 9145 Front Side Marker Light .................. 2886X Center [...]
-
Page 243
BULB REPLACEMENT Auxiliary High Beam Headlight, Front Park/T urn Signal Light, Front Side Marker Light 1. Remove the push pin from the upper outer corner of the splash shield and remove the splash shield. 2. T urn the appropriate bulb and socket assembly counter-clockwise, and then pull it out of the headlight assembly . 1 — Front Side Marker Lig[...]
-
Page 244
3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly into the head- light assembly , and then turn it clockwise. 6. Install the splash shield and push pin. High Intensity Discharge Headlights (HID) The headlights are a type of high voltage dischar ge tube. Hi[...]
-
Page 245
Front Fog Light 1. Remove the push pin from the upper outer corner of the splash shield and remove the splash shield. 2. T urn the bulb and socket assembly counter-clockwise, and then pull it out of the front fog light assembly . 3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the b[...]
-
Page 246
T aillight, T ail/Stop Light, Rear Marker Light 1. Open the trunk 2. Remove the two fasteners and then remove the access panel. 3. T urn the appropriate bulb and socket assembly counter-clockwise, and then pull it out of the upper light assembly . 4. Pull the bulb out of the socket assembly . 1 — Rear Marker Light 2 — T ail/Stop Light 3 — T a[...]
-
Page 247
5. Push the replacement bulb into the socket assembly . 6. Reinstall the bulb and socket assembly into the upper light assembly , and then turn it clockwise. 7. Install the access panel and the two fasteners. 8. Close the trunk. Backup Light, Rear T urn Signal Light 1. Open the trunk. 2. Remove the two fasteners and then remove the access panel. 24[...]
-
Page 248
3. Remove the three upper light assembly retaining nuts. 4. Remove the three bulb and socket assemblies from the upper light assembly by turning them counter-clockwise and then pulling them out of the upper light assembly . MAINT AINING YOUR VEHICLE 247 7[...]
-
Page 249
5. Remove the upper light assembly . 6. T urn the appropriate bulb and socket assembly counter-clockwise, and then pull it out of the lower light assembly . 1 — Backup Light 248 MAINT AINING YOUR VEHICLE[...]
-
Page 250
7. Pull the bulb out of the socket assembly . 8. Push the replacement bulb into the socket assembly . 9. Reinstall the bulb and socket assembly into the lower light assembly , and then turn it clockwise. 10. Reinstall the three bulb and socket assemblies into the upper light assembly , and turn them clockwise. 1 1. Reinstall the upper light assembl[...]
-
Page 251
License Light 1. Open the trunk. 2. T urn the bulb and socket assembly counter-clockwise, and then pull it out of the housing. 3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly into the hous- ing, and then turn it clockwise. 6. Close the trunk. 250 MAINT A[...]
-
Page 252
HEADLIGHT AIMING The headlights on your new vehicle were aimed at the factory under a no load setting. A great increase in weight will change the aiming of the headlights. Therefor e, it may be necessary to readjust the headlights if you typically carry an excessive amount of weight in the rear compartment or generally suspect misalignment. In ei- [...]
-
Page 253
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar t Antifr eeze/Coolant 5 Y ear/102,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil For best performance and maximum protection under all types of operating conditions, the manufacturer only r eco[...]
-
Page 254
Chassis Component Fluid, Lubricant, or Genuine Part T ransmission Mopar t A TF+4 Automatic T ransmission Fluid. Rear Axle Mopar t Synthetic Gear and Axle Lubricant SAE 75W -140 or equivalent, with Limited Slip Additive Friction Modifier Brake Master Cylinder Mopar t Brake & Clutch Fluid DOT 4 Motor V ehicle or equivalent. Power Steering Reservo[...]
-
Page 255
Body Component Fluid, Lubricant, or Genuine Part Hinges: Door , T runk & Hood Springs and Links Mopar t Spray White Lube or equivalent. Latches: Door , Hood & T runk Mopar t Multi-Purpose Lube NLGI Grade 2 or equivalent. Door Hinge Check Spring Lubriplate Mo-Lith No. 2 Gr ease or Petrocan Multiflex Moly EP 2 Grease or equivalent. Seat Regul[...]
-
Page 256
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 2 5 6 m Maintenance Schedules ................... 2 5 6 ▫ Schedule “B” ........................ 2 5 9 ▫ Schedule “A” ........................ 2 6 9 8 M A I N T E N A N C E S C H E D U L E S[...]
-
Page 257
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]
-
Page 258
• Off-r oad or desert operation. • If equipped for and operating with E-85 (ethanol) fuel. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in Schedule “B” in this section. NOTE: If ANY of these apply to you, then flush[...]
-
Page 259
At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark. • Check the windshield washer solvent and add if requir ed.[...]
-
Page 260
SCHEDULE “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures ar e below 32° F (0° C). • Stop and go driving. • Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16 km). • More than 50% of your driving i[...]
-
Page 261
Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the air cleaner filter if necessary . X Inspect the transmission fluid. X Inspect the brake linings. X Change the [...]
-
Page 262
Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the air cleaner filter if necessary . X Inspect and replace the PCV valve if neces- sary . X Change the transm[...]
-
Page 263
Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the engine air cleaner fil- ter if necessary . X Inspect and replace the Auto T ension Drive Belt if necessary[...]
-
Page 264
Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (110 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXXX Rotate the tires. LL XXX Inspect and replace the air cleaner filter if necessary . X Inspect and replace the PCV valve if necessary . X Flush and rep[...]
-
Page 265
Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate the tires. LL XX X Inspect and replace the air cleaner filter if necessary . XX Inspect and replace the PCV valve if neces- sary . X Inspect an[...]
-
Page 266
Miles 93,000 96,000 99,000 102,000 105,000 108,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) (180 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXXX Rotate the tires. LL XXX Inspect and replace the engine air cleaner fil- ter if necessary . X Replace the spark plugs. X Replace the ignition cables[...]
-
Page 267
Miles 93,000 96,000 99,000 102,000 105,000 108,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) (180 000) Inspect the brake linings. X X Change the rear axle fluid. X X Change the brake and clutch fluid. X Change the brake fluid. X Lubricate the front and r ear suspension ball joints. X 266 SCHEDULE “B” 8 M A I N T E N A N C E[...]
-
Page 268
Miles 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXX Rotate the tires. LL XX Inspect and replace the engine air cleaner filter if neces- sary . X Inspect and replace the PCV valve if necessary . X Flush and replace the engine coolant[...]
-
Page 269
Miles 1 1 1,000 1 14,000 117,000 120,000 (Kilometers) (185 000) (190 000) (195 000) (200 000) Change the brake and clutch fluid. X Lubricate the front and r ear suspension ball joints. X ‡ This maintenance is not requir ed if previously r eplaced. LL Although not requir ed, the manufacturer r ecom- mends repr ogramming TPMS after rotating tir es [...]
-
Page 270
SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change engine oil and engine oil filter . X XXXX Rotate the tires. LL X XXXX Inspect and replace the engine air cleaner filter if necessary . X Inspect the transmission fluid. X X Inspect the brake lini[...]
-
Page 271
Miles 36,000 42,000 48,000 54,000 60,000 (Kilometers) (60 000) (70 000) (80 000) (90 000) (100 000) [Months] [36] [42] [48] [54] [60] Change engine oil and engine oil filter . XXXXX Rotate the tires. LL XXXXX Inspect and replace the engine air cleaner filter if necessary . X Inspect and replace the PCV valve if necessary . X Flush and replace the e[...]
-
Page 272
Miles 66,000 72,000 78,000 84,000 90,000 (Kilometers) (1 10 000) (120 000) (130 000) (140 000) (150 000) [Months] [66] [72] [78] [84] [90] Change engine oil and engine oil filter . X XXXX Rotate the tires. LL X XXXX Inspect and replace the engine air cleaner filter if necessary . X Inspect and replace the PCV valve if necessary . X Inspect and repl[...]
-
Page 273
Miles 96,000 102,000 108,000 114,000 120,000 (Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000) [Months] [96] [102] [108] [114] [120] Change engine oil and engine oil filter . X XXX X Rotate the tires. LL X XXX X Inspect and replace the engine air cleaner filter if necessary . X Inspect and replace the PCV valve if necessary . X Replace[...]
-
Page 274
Miles 96,000 102,000 108,000 114,000 120,000 (Kilometers) (160 000) (170 000) (180 000) (190 000) (200 000) [Months] [96] [102] [108] [114] [120] Change the transmission fluid. X Inspect the brake linings. X Change the rear axle fluid. X Change the brake and clutch fluid. X Lubricate the front and r ear suspension ball joints. X ‡ This maintenanc[...]
-
Page 275
[...]
-
Page 276
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .......................... 2 7 7 ▫ Prepar e For The Appointment ............ 2 7 7 ▫ Prepar e A List ........................ 2 7 7 ▫ Be Reasonable W ith Requests ............. 2 7 7 m If Y ou Need Assistance ................... 2 7 7 ▫ DaimlerC[...]
-
Page 277
m Publication Order Forms .................. 2 8 2 m Department Of T ransportation Uniform T ir e Quality Grades ........................ 2 8 3 ▫ T readwear .......................... 2 8 3 ▫ T raction Grades ...................... 2 8 3 ▫ T emperature Grades ................... 2 8 4 276 IF YOU NEED CONSUMER ASSIST ANCE[...]
-
Page 278
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty; discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s [...]
-
Page 279
special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner . This is why you should always talk to your authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the author[...]
-
Page 280
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the U[...]
-
Page 281
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of Califor[...]
-
Page 282
REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C. If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying the manufacturer . If NHTSA receives similar complaints, it may ope[...]
-
Page 283
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover orders ar e ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A str eet address is r equired when or dering manuals. (No P .O. Boxes). ?[...]
-
Page 284
Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .daimlerchrysler .com • www .daimlerchrysler .ca/manuals DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the Nationa[...]
-
Page 285
on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor - mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. T emperature Grades The temperature [...]
-
Page 286
INDEX 10[...]
-
Page 287
About Y our Brakes ....................... 1 4 4 ABS (Anti-Lock Brake System) ............ 97,145 Accessory Delay , Power .................. 13,26 Adding Engine Coolant (Antifreeze) .......... 2 2 1 Adding Fuel ........................... 1 7 1 Adding W asher Fluid ................... 89,217 Adjustable Pedals ........................ 9 0 Aiming Hea[...]
-
Page 288
Emergency Starting ..................... 1 8 6 Jump Starting ......................... 1 8 6 Keyless T ransmitter Replacement (RKE) ....... 2 1 Location .......................... 186,206 Saving Feature (Pr otection) ............... 2 1 0 Storing V ehicle ........................ 2 1 0 Bearings .............................. 2 3 0 Belt System, Six [...]
-
Page 289
Carpeting ............................. 2 3 3 Catalytic Converter ...................... 2 0 4 CD (Compact Disc) Changer ................ 1 1 4 CD (Compact Disc) Player ............... 108,1 12 Chains, T ire ............................ 1 6 4 Charging System Light .................... 1 0 6 Chart, T ire Sizing ........................ 1 5 0 Check E[...]
-
Page 290
Selection of Coolant (Antifreeze) ...... 220,251,252 Crankcase Emission Control System .......... 2 0 6 Customer Assistance ..................... 2 7 7 Daytime Running Lights ................... 8 2 Dealer Service .......................... 1 9 8 Defroster , Rear W indow ................... 1 2 8 Defroster , W indshield ................... 58,125 D[...]
-
Page 291
Compartment ......................... 1 9 4 Coolant (Antifreeze) ................. 219,252 Cooling .......................... 104,219 Exhaust Gas Caution ................ 29,57,171 Fails to Start .......................... 1 3 5 Flooded, Starting ...................... 1 3 5 Fuel Requirements .................. 168,251 O i l .......................[...]
-
Page 292
Manual T ransmission ................. 228,253 Power Steering ..................... 213,253 Fluids ................................ 2 5 2 Fluids, Lubricants and Genuine Parts .......... 2 5 2 Fog Lights ......................... 81,82,97 Four-W ay Hazard Flasher .................. 1 7 6 Freeing A Stuck V ehicle ................... 1 8 9 Fuel ......[...]
-
Page 293
Hazard Driving Through Flowing, Rising, or Shallow Standing W ater ................. 1 4 0 Hazard W arning Flasher ................. 99,176 Headlights .......................... 81,243 Aiming ............................. 2 5 1 High Beam ........................... 8 3 High Beam/Low Beam Select Switch ......... 8 3 Lights On Reminder ..............[...]
-
Page 294
Key-In Reminder ......................... 1 3 Keyless Entry System ...................... 1 7 Keys ................................. 1 2 Knee Bolster .......................... 40,41 Lane Change and T urn Signals ............... 8 2 Lap/Shoulder Belts ....................... 3 1 Latch Plate ............................. 3 2 Latches ................[...]
-
Page 295
L o w T i r e ............................ 1 0 1 Malfunction Indicator (Check Engine) ........ 9 8 Map Reading .......................... 8 4 Oil Pressur e .......................... 1 0 5 Park ................................ 8 1 Passing .............................. 8 4 Reading .............................. 8 4 Seat Belt Reminder ..............[...]
-
Page 296
Methanol ............................. 1 6 9 Mirrors ................................ 7 5 Electric Remote ........................ 7 6 Outside ............................ 75,76 Rearview ............................. 7 5 Modifications/Alterations, V ehicle ............. 7 Monitor , T ire Pressur e System ............... 1 6 6 Mopar Parts ..........[...]
-
Page 297
Parking On Hill ......................... 1 4 2 Passing Light ........................... 8 4 PCV V alve ............................ 2 0 6 Pedals, Adjustable ........................ 9 0 Pets .................................. 5 6 Pets, T ransporting ........................ 5 6 Placard, T ire and Loading Information ......... 1 5 3 Power Accessor[...]
-
Page 298
Remote Keyless Entry (RKE) ................. 1 7 Remote T runk Release ..................... 2 9 Replacement Parts ....................... 1 9 7 Replacement T ires ....................... 1 6 2 Reporting Safety Defects ................... 2 8 1 Restraints, Child ......................... 5 0 Restraints, Infant ......................... 5 1 Restrain[...]
-
Page 299
Service Contract ......................... 2 7 9 Service Engine Soon Light (Malfunction Indicator) .................... 9 8 Service Manuals ........................ 2 8 2 Setting the Clock ........................ 1 0 6 Shift Indicator Light ................... 103,138 Shift Speeds ......................... 136,138 Shift Speeds, Manual T ransaxle .[...]
-
Page 300
T ire Safety Information .................... 1 4 9 TIREFIT .............................. 1 7 7 T i r e s ............................ 59,157,283 Aging (Life of T ires) .................... 1 6 2 Air Pressur e .......................... 1 5 7 Alignment ........................... 1 6 3 Chains .............................. 1 6 4 General Informatio[...]
-
Page 301
T ransmitter , Remote Keyless Entry (RKE) ...... 17,21 T ransporting Pets ........................ 5 6 T read W ear Indicators .................... 1 6 1 T rip Odometer .......................... 9 6 T runk Release, Emergency .................. 3 0 T runk Release Remote Control ............... 2 9 T urn Signals ........................ 81,82,99 Und[...]
-
Page 302
W indshield W iper Blades .................. 2 1 7 W indshield W ipers ....................... 8 7 W iper Blade Replacement .................. 2 1 7 W ipers, Intermittent ....................... 8 7 W iring, Ignition (Spark Plug W ires) ........... 2 0 5 INDEX 301 10[...]
-
Page 303
Viper OWNER’ S MANUAL 2008 2008 Viper 81-226-0804 Second Edition Printed in U.S.A.[...]