Go to page of 249
Similar user manuals
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Dodge Intrepid (2004), along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Dodge Intrepid (2004) one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Dodge Intrepid (2004). A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Dodge Intrepid (2004) should contain:
- informations concerning technical data of Dodge Intrepid (2004)
- name of the manufacturer and a year of construction of the Dodge Intrepid (2004) item
- rules of operation, control and maintenance of the Dodge Intrepid (2004) item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Dodge Intrepid (2004) alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Dodge Intrepid (2004), and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Dodge service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Dodge Intrepid (2004).
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Dodge Intrepid (2004) item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 7 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................ 4 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 8 3 5[...]
-
Page 2
I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 3
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number .............. 6 1 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 4
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]
-
Page 5
INTRODUCTION 5 1 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 6
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedur es which could result in damage to your vehicle. If you do not read this entire manual you may miss important information. Observe all W arnings and Cautions. VEHICLE IDE[...]
-
Page 7
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 9 ▫ Sentry Key Engine Immobilizer— If Equipped . . 9 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 2 ▫ Floor Shift Ignition Interlock System — If Equipped ............................ 1 3 ?[...]
-
Page 8
▫ T o Program Additional T ransmitters ......... 2 0 ▫ T ransmitter Linked T o Memory Programming . . 21 ▫ General Information .................... 2 2 ▫ T ransmitter Battery Service ............... 2 2 䡵 Security Alarm System— If Equipped ........ 2 3 ▫ T o Set The Alarm ...................... 2 3 ▫ T o Disarm The System ..........[...]
-
Page 9
A WORD ABOUT YOUR KEYS Y ou can insert the double sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer or a locksmith. Ask your dealer for these numbers and keep them in a safe place. CAUTION! An un[...]
-
Page 10
If the Sentry Key Immobilizer System indicator light comes on during normal vehicle operation (it has been running for longer than 10 seconds) a fault has been detected in the electronics and the vehicle should be serviced as soon as possible. NOTE: • The Sentry Immobilizer System is not compatible with remote starting systems. Use of these syste[...]
-
Page 11
At the time of purchase, the original owner is provided with a four digit PIN number . This number is requir ed for dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming procedure. This procedur e consists of programming a blank key to the vehicle electronics. A blank key i[...]
-
Page 12
2. this device must accept any interference that may be received, including interference that may cause undes- ired operation Ignition Key Removal Place the shift lever in Park and make sure that the shift knob push-button (vehicles with floor shift) is in the out position. T urn the key to the Lock position and remove the key . NOTE: If you try to[...]
-
Page 13
Floor Shift Ignition Interlock System — If Equipped This system pr events the key fr om being removed unless the shift lever is in P ARK and the shift knob push button is out. It also prevents shifting out of P ARK unless the key is in the OFF or RUN positions. THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 13 2 I n f o r m a t i o n P r o v i d e [...]
-
Page 14
GLOVE COMP ARTMENT LOCK The glove box lock has been designed so that the key can be inserted only about half way . Do not force the key past this point. ILLUMINA TED ENTRY SYSTEM — IF EQUIPPED The interior lights will come on when you unlock the vehicle with the remote keyless entry (if so equipped) or central unlock (if so equipped). They will r[...]
-
Page 15
If you pr ess the door lock switch while the keys are in the ignition switch, with the ignition switch in the ACC, LOCK, or OFF position, and the driver’s door is open, the doors will not lock. A chime will sound as a reminder to remove the keys. W ARNING! For personal security and safety in the event of an accident, lock the vehicle doors as you[...]
-
Page 16
“Child-Protection” Lock System (Rear Doors) T o provide a safer environment for small children riding in the rear seat, the rear doors of your vehicle have the “child-protection” door lock system. T o use the system, open each rear door and use a key to move the control near the door latch UP to the “Engage” position as shown on the doo[...]
-
Page 17
3. vehicle speed is above 15 m.p.h. (24 km/h), 4. the accelerator pedal is depressed. The Automatic Door Locks can be disabled or re-enabled by performing the same following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between OFF and ON/RUN and back to OFF 4 times ending up in the OFF position. 3. D[...]
-
Page 18
1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between ON/RUN and OFF 4 times ending up in the OFF position. 3. Depress the power door unlock switch to unlock the doors. 4. A single chime will indicate the completion of the programming. Remote Keyless Entry This system allows you to lock or unlock the doors and u[...]
-
Page 19
Enable/Disable Lamp Flash: The Lamp Flash can be enabled or disabled by perform- ing the following procedure: 1. Press and hold the Lock button on the transmitter . 2. Continue to hold the Lock button, wait at least 4 but no longer than 10 seconds, then press the T runk button. 3. Release both buttons. T o lock the doors: Press and release the LOCK[...]
-
Page 20
T o Use The Panic Alarm: Press and hold the Panic button to activate the alarm. Press and hold the Panic button or unlock the door with the key to deactivate the alarm. The alarm will also shut itself of f after 3 minutes or when vehicle speed reaches 15 m.p.h. (24 km/h). T o Program Additional T ransmitters: Up to 4 transmitters can be programmed [...]
-
Page 21
will hear a chime after each transmitter has been success- fully programmed. Y ou will have 30 seconds to finish programming all new transmitters. A chime will sound when the 30 seconds is over or the ignition switch is turned to the Lock position. T ransmitter Linked to Memory Programming Y our remote transmitters can be programmed to return the d[...]
-
Page 22
General Information This transmitter complies with FCC rules part 15 and with RS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. If your Re[...]
-
Page 23
SECURITY ALARM SYSTEM— IF EQUIPPED The system monitors the doors, trunk key cylinder , and ignition for unauthorized operation. If something triggers the alarm, the system will signal for up to 18 minutes. For the first 3 minutes the horn will sound and the headlights, park and tail lights and the SET light will flash. The horn will stop and if t[...]
-
Page 24
3. The SET light on the top of the instrument panel will flash rapidly for 16 seconds. This shows that the system is arming. If the light comes on but does not flash, the system is still armed, but there is a problem in the trunk circuit. After 16 seconds the SET light will continue to flash slowly . This shows that the system is fully armed. T o d[...]
-
Page 25
POWER WINDOWS W indow controls on the driver’s door control all door windows. The driver’s window switch has an Auto Down feature. Press the window switch past the detent, release, and the window will go down automatically . Press the switch a second time in either direction to stop the window . T o open the window part way , press the window s[...]
-
Page 26
TRUNK SAFETY W ARNING W ARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in th[...]
-
Page 27
Please pay close attention to the information in this section. It tells you how to use your r estraint system properly to keep you and your passengers as safe as possible. W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. Y ou can strike the interior of your vehicle or other pas[...]
-
Page 28
W ARNING! • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or[...]
-
Page 29
2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a ”click.” W ARNING! • A belt that is buckled int[...]
-
Page 30
4. Position the lap belt across your thighs, below your abdomen. T o r emove slack in the lap belt portion, pull up a bit on the shoulder belt, as shown. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too [...]
-
Page 31
W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Seat belt assemblies must be replaced after an accident if they have been damaged (ben[...]
-
Page 32
Seat Belts and Pregnant Women W e recommend that pregnant women use the seat belts throughout their pregnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible. Keep the belt low so that it does not come across the abdomen. T[...]
-
Page 33
Driver and Right Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above [...]
-
Page 34
W ARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers are designed to open only when the airbags are inflated. • If your vehicle is equipped with side airbags, do not use[...]
-
Page 35
be secured in the rear seat in child restraints or belt- positioning booster seats appropriate for the size and age of the child. Older children who do not use child restraints or belt- positioning booster seats should ride properly buckled up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. If a chi[...]
-
Page 36
Airbag System Components The airbag system consists of the following: • ACM (Airbag Control Module) • AIRBAG Readiness Light • Driver and Passenger Front Airbags • Optional Driver and Passenger Side Airbags. • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Crash Sensors • Knee Impact Bolsters The side air[...]
-
Page 37
then turns the light off. If it detects a malfunction in any part of the system, it turns on the light either momentarily or continuously . W ARNING! Ignoring the AIRBAG light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it [...]
-
Page 38
floor . They are not caused by contact with chemicals. They are not permanent and normally heal quickly . However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . • As the airbags deflate you may see some smoke-like particles. The particles are a normal by-product of the proce[...]
-
Page 39
• The side impact airbag control module monitors the readiness of the electronic parts of the system when- ever the ignition switch is in the “ST AR T” or “RUN” positions. These include all of the items listed above except for the AIRBAG light (which is controlled by the frontal airbag system). • In moderate to severe side collisions, t[...]
-
Page 40
Airbag Light Y ou will want to have the airbags ready for your protection in an impact. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately . • The AIRBAG light does not come on or flickers during the 6 to 8 seconds when the ignition switch is first t[...]
-
Page 41
Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used rearwar d-facing: infant carriers and “convertible” child seats. • The infant carrier is only used rearward-facing in th[...]
-
Page 42
Standards. W e also recommend that you try a child restraint in the vehicle seats where you will use it before you buy it. • The restraint must be appropriate for your child’s weight and height. Check the label on the restraint for weight and height limits. • Carefully follow the instructions that come with the restraint. If you install the r[...]
-
Page 43
Children T oo Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in the rear seat. • Make sure that the child is upright in the seat. • The lap portion should be l[...]
-
Page 44
Installing the LA TCH-Compatible Child Restraint System W e urge that you carefully follow the directions of the manufacturer when installing your child restraint. Not all child r estraint systems will be installed as described her e. Again, carefully follow the installation instructions that were provided with the child restraint system. The rear [...]
-
Page 45
the anchorage, being careful to route the tether strap to provide the most direct path between the anchor and the child restraint. If your vehicle is equipped with adjust- able rear head restraints, raise the head restraint and, where possible, route the tether strap under the head restraint and between the two posts. If not possible, lower the hea[...]
-
Page 46
plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position. T o attach a child restraint tether strap: 1. Lift the cover over the anchor directly behind the seat where you are placing the child restraint. 2. Route the tether strap to provide the most direct path for the strap between the anch[...]
-
Page 47
Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. ENGINE BREAK-IN RECOMMENDA TIONS The engine in your new vehicle does not requir e a long break-in period. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are[...]
-
Page 48
• T o avoid drawing exhaust gases into the vehicle, close the trunk while driving. However , if for some reason it must remain open, close all windows. Adjust the heating or cooling system to force outside air into the vehicle. Set the blower at high speed. Safety Checks Y ou Should Make Inside the V ehicle Seat Belts Inspect the belt system peri[...]
-
Page 49
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Cup Holders .......................... 5 2 ▫ Front Seat Cupholders ................... 5 2 䡵 Coat Hook ............................ 5 2 䡵 Mirrors .............................. 5 3 ▫ Adjusting The Inside Day/Night Mirror ...... 5 3 ▫ Automatic Dimming Mirror — If Equipped .... 5 [...]
-
Page 50
䡵 Exterior Lights ......................... 6 2 ▫ Headlights And Parking Lights ............ 6 2 ▫ Lights-On Reminder .................... 6 2 ▫ Headlight T ime Delay ................... 6 2 ▫ Battery Saver Feature—Exterior Lights ....... 6 3 ▫ Fog Lights ........................... 6 3 ▫ Daytime Running Lights (Canada Only) ...... [...]
-
Page 51
䡵 Power Sun Roof — If Equipped ............ 7 6 ▫ W ind Buffeting ........................ 7 7 ▫ Sun Roof Maintenance ................... 7 7 䡵 Overhead T ravel Information Center — If Equipped ............................. 7 7 ▫ US/M Button ......................... 7 8 ▫ Reset Button .......................... 7 8 ▫ Global Reset[...]
-
Page 52
CUP HOLDERS Front Seat Cupholders The cupholders for the 50/50 bench seat are located in the arm rest. raise the arm rest cover and fold the cupholders forward. The molded cupholders for the bucket seat are located in the forward edge of the center console. COA T HOOK The coat hook is located next to the Rear Seat Reading/ Courtesy Light Switch. Pu[...]
-
Page 53
MIRRORS Adjusting The Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window . A two point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjus[...]
-
Page 54
Electric Remote Control Mirrors Press the L or R button located on the driver’s door panel for Left or Right mirror selection. T ilt the mirror control up or down, or side to side to adjust the view in the mirror . NOTE: Place the mirr or switch in the neutral position to prevent accidental changing of the mirror setting. Mirror Adjustment Outsid[...]
-
Page 55
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on each sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cover upward. The lamps turn on automatically . Closing the mirror cover turns off the lamps. SEA TS Manual Seat Adjustment W ARNING! Adjusting a seat while the vehicle is moving is dang[...]
-
Page 56
Power Seats — If Equipped The power seat switch is on the outboard side of the driver’s seat near the floor . Use this switch to move the seat up or down, forward or rearwar d, or to tilt the seat. The passenger’s seat will move forward or rearward. CAUTION! Do not place any article under a power seat as it may cause damage to the seat contro[...]
-
Page 57
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. Lumbar Support — If Equipped This feature allows you to increase or decrease the amount o[...]
-
Page 58
The head restraints have a locking button which must be pushed in to lower the head restraint. The restraints may be raised without pushing in the button. Folding Rear Seats — If Equipped T o provide additional storage ar ea, the rear seatbacks can be folded forward. Pull the loop near the top of the seat and fold the seatback forward. When the s[...]
-
Page 59
W ARNING! The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in an accident. Children should be seated and using the proper restraint system. TO OPEN AND CLOSE THE HOOD T o open the h[...]
-
Page 60
Then lift up on the catch located under the front edge of the hood, near the center . T o prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. Never drive your vehicle unless the hood is fully closed, with both latches engaged. W ARNING! If the hood is not [...]
-
Page 61
NOTE: The Battery Saver Feature will not turn these lights off if a switch was used to turn them on. Instrument Panel Lighting The brightness of the instrument panel lighting can be regulated by rotating the dimmer switch. Daytime Brightness Feature Certain instrument panel components can be illuminated at full brightness during the daytime. These [...]
-
Page 62
EXTERIOR LIGHTS Headlights And Parking Lights When the headlight switch is turned clockwise from Off to the first position, the parking lights, taillights, side marker lights, license plate light and instrument panel lights are all turned on. The headlights turn on when the switch is turned to the second position. Lights-On Reminder If the headligh[...]
-
Page 63
T o activate the delay , turn off the ignition while the headlights are still on. Then turn of f the headlights within 45 seconds. The delay interval begins when the ignition is turned off. If the headlights are turned off before the ignition, they will go off in the normal manner . Battery Saver Feature—Exterior Lights If an exterior light is le[...]
-
Page 64
T urn Signals The arrows on each side of the instrument cluster flash to show operation of the front and rear turn signal lights. If either light flashes at an extremely fast rate, check for a defective outside light bulb. If both of the indicators fail to light when the lever is moved, it would suggest that the fuse or indicator bulbs are defectiv[...]
-
Page 65
W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with the defroster before and during windshield washer use. Speed Sensitive Intermittent Wipers System Use the intermittent[...]
-
Page 66
W ARNING! T ilting the steering column while the vehicle is moving is dangerous. Without a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving. TRACTION CONTROL SWITCH — IF EQUIPPED T o turn the T raction Control System Of [...]
-
Page 67
ELECTRONIC SPEED CONTROL This device can be engaged to take over the accelerator operation at speeds between 30 mph (48 km/h) and 85 mph (137 km/h). The controls are mounted on the steering wheel. T o Activate: Push the ON/OFF button to turn the system ON. The CRUISE light in the instrument cluster will illuminate when the system is ON. NOTE: Y ou [...]
-
Page 68
T o Set At A Desired Speed: When the vehicle has reached the desired speed, and the system is activated, press and release the SET button. Release the accelerator and the vehicle will operate at the selected speed. T o Deactivate: A soft tap on the brake pedal, pushing the CANCEL button or normal brake pressure while slowing the vehicle will deacti[...]
-
Page 69
W ARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Y our vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery . Using Speed Control On Hills Y our ve[...]
-
Page 70
OVERHEAD CONSOLE The overhead console contains dome/reading lights, an optional universal garage door opener (HomeLink 威 ), an optional sunroof switch, and an optional Overhead T ravel Information System (OTIS). Dome/Reading Lights Located in the overhead console are two dome/reading lights. The dome/reading lights illuminate when a door is opene[...]
-
Page 71
For additional information on HomeLink 威 , call 1–800–355–3515, or on the internet at www .homelink.com. W ARNING! A moving garage door can cause injury to people and pets in the path of the door . People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse” feat[...]
-
Page 72
W ARNING! V ehicle exhaust contains carbon monoxide, a danger - ous gas. Do not run the vehicle’s exhaust while training the transceiver . Exhaust gas can cause seri- ous injury or death. W ARNING! Y our motorized door or gate will open and close while you are training the universal transceiver . Do not train the transceiver if people or pets are[...]
-
Page 73
NOTE: Some entry gates and garage door openers may requir e you to replace step 4 with the procedur es listed under Canadian Programming. 5. The indicator light in the Universal T ransceiver will begin to flash, first slowly and then rapidly . The rapid flashing indicates successful programming. If after 90 seconds the indicator light does not flas[...]
-
Page 74
1. Locate the training button on the garage door motor head unit. The exact location and color of the button may vary by garage door opener manufacturer . If you have difficulty in locating the training button, check your garage door opener manual, or call 1-800-355-3515 or , on the Internet, at www .homelink.com. 2. Press and hold the training but[...]
-
Page 75
Reprogramming A Single Button 1. Press and hold the Universal T ransceiver button to be repr ogrammed. Do not release until step 4 has been completed. 2. When the indicator light begins to flash slowly (after 20 seconds) position the hand held transmitter 1 to 3 inches (3 to 8 cm) away from the button to be trained. 3. Press and hold the hand held [...]
-
Page 76
POWER SUN ROOF — IF EQUIPPED The sun roof controls are located on the overhead con- sole. T o Open the sunroof from the Closed position, press and release the OPEN button. The sunroof will open fully , then stop automatically . T o Close the sunroof fr om an open or vent position, pr ess and hold the CLOSE button. The sunroof will close fully and[...]
-
Page 77
Wind Buffeting W ind buffeting can be described as the per ception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunr oof (if so equipped) in certain open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs [...]
-
Page 78
US/M Button Use this button to change the display from U.S. to metric measurement units. RESET Button Use this button to reset the following displays to zero: A verage Fuel Economy T rip Odometer Elapsed time. Global Reset If the RESET button is pressed twice within 3 seconds while in any of the 3 resetable displays, the Global Reset will reset all[...]
-
Page 79
Compass/T emperature Display This display provides the outside temperature and one of eight compass readings to indicate the direction the vehicle is facing. Automatic Compass Calibration The self calibrating feature of the compass eliminates the need to calibrate the compass for normal conditions. During a short initial period, the compass may app[...]
-
Page 80
V ariance is the differ ence between magnetic North and geographic North. For pr oper compass function, the correct variance zone must be set. Refer to the variance map for the correct variance zone. T o check the variance zone, the ignition must be on and the compass/ temperature displayed. Press and hold the RESET button for about 5 seconds until[...]
-
Page 81
Outside T emperature Because engine temperature can increase the displayed temperature, temperature readings are slowly updated when vehicle speed is below 20 MPH (30 km/h). ELECTRICAL POWER OUTLET Y our vehicle may be equipped with a power outlet. This is located in the center of the instrument panel if your vehicle has bench or split bench seats.[...]
-
Page 82
I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 83
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instruments And Controls ................. 8 6 䡵 Instrument Cluster ...................... 8 7 䡵 Instrument Cluster Description ............. 8 8 䡵 Electronic Digital Clock .................. 9 3 ▫ T o Set The Clock ....................... 9 3 䡵 Sales Code RAZ—AM/ FM Stereo Radio W ith [...]
-
Page 84
▫ T ape Eject ............................ 9 7 ▫ Scan Button .......................... 9 7 ▫ Changing T ape Direction ................. 9 7 ▫ Metal T ape Selection .................... 9 7 ▫ Pinch Roller Release .................... 9 7 ▫ Noise Reduction ....................... 9 8 ▫ Operating Instructions — CD Player ......... 9 8[...]
-
Page 85
▫ Radio Display Messages ................ 1 0 5 䡵 Sales Code RBK—AM/ FM Stereo Radio W ith CD Player And CD Changer Controls ... 1 0 5 ▫ Radio Operation ...................... 1 0 5 ▫ CD Player Operation ................... 1 0 7 ▫ CD Changer Operation — If Equipped ...... 1 0 9 䡵 6 Disc CD Changer — If Equipped ......... 1 1 0 ?[...]
-
Page 86
INSTRUMENTS AND CONTROLS 86 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 87
Instrument Cluster UNDERST ANDING YOUR INSTRUMENT P ANEL 87 4 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 88
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge When the ignition is in the ON position, the pointer will show the level of fuel remaining in the tank. 2. Low Fuel W arning Light When the fuel level drops to about 2 gallons (8 liters), the Low Fuel symbol will light and re- main lit until fuel is added. A warning chime will sound when the light comes [...]
-
Page 89
7. T urn Signal Indicators The arrow will flash in unison with the exterior turn signal, when using the turn signal lever . 8. High Beam Indicator This light shows that the headlights are on high beam. Pull the turn signal lever towards the steering wheel to switch the headlights from high or low beam. 9. Seat Belt Reminder Light The light will com[...]
-
Page 90
If the pointer rises to the “H” mark, stop the vehicle and turn off the engine until the problem is corrected. CAUTION! Continuing to drive with an overheated engine cool- ing system can cause damage to the engine or other components. There are steps that you can take to slow down an impending overheat condition. If your air conditioning is on,[...]
-
Page 91
have it replaced. If the light stays on, or comes on while driving, have the system checked by an autho- rized dealer . 19. Odometer/T rip Odometer Shows the total distance the vehicle has been driven. U.S. Federal regulations requir e that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle [...]
-
Page 92
If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. 23. Brake System W arning Light The dual brake system provides a reserve braking capability if a failure occurs in a portion of the hydraulic system. This light monitors both the brake fluid level and the parking brake. If th[...]
-
Page 93
ELECTRONIC DIGIT AL CLOCK The clock and radio each use the display panel built into the radio. A digital readout indicates the time in hours and minutes whenever the ignition switch is in the ON or ACC position. When the ignition switch is in the OFF position, pressing the T ime button will cause the radio to display time for several seconds, then [...]
-
Page 94
Seek Button (Radio Mode) Press and release the Seek button to search for the next station in either the AM or FM mode. Press the top of the button to seek up and the bottom to seek down. Holding the button will by pass stations until you release the button. T uning Press the TUNE control up or down to increase or decrease the frequency . If you pre[...]
-
Page 95
Program T ype Radio Display Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name. The PTY function only operates when in the FM mode. The radio display will flash[...]
-
Page 96
AM/FM Selection Press the AM/FM button to change fr om AM to FM. The operating mode will be displayed next to the station frequency . The display will show ST when a stereo station is received. Scan Button Pressing the SCAN button causes the tuner to search for the next station, in either AM or FM, pausing for 5 seconds at each listenable station b[...]
-
Page 97
be experienced due to a defective cassette tape. Clean and demagnetize the tape heads at least twice a year . Seek Button Press the SEEK button up for the next selection on the tape and down to return to the beginning of the current selection. Press the SEEK button up or down to move the track number to skip forward or backward 1 to 6 selections. P[...]
-
Page 98
Noise Reduction The Dolby Noise Reduction System* is on whenever the tape player is on, but may be switched off. T o turn off the Dolby Noise reduction System: Press the Dolby button (button 2) after you insert the tape. The NR light in the display will go off when the Dolby System is off. The Dolby System is automatically reactivated each time a t[...]
-
Page 99
EJT CD (Eject) Button Press this button and the disc will unload and move to the entrance for easy removal. The unit will switch to the radio mode. If you do not remove the disc within 15 seconds, it will be reloaded. The radio mode will continue to appear . The disc can be ejected with the radio OFF . FF/TUNE/RW Button Press FF (Fast Forward) once[...]
-
Page 100
T ape CD Button Press this button to select between CD player and T ape player . Time Button Press this button to change the display from elapsed CD playing time to time of day . Scan Button Press this button to play the first 10 seconds of each track. T o stop the scan function, press the button a second time. SALES CODE RBB—AM/FM STEREO RADIO W[...]
-
Page 101
For your convenience, the volume can be turned down, but not up, when the audio system is off and the ignition is ON. Seek Press and release the SEEK button to search for the next station in either the AM or FM mode. Press the top of the button to seek up and the bottom to seek down. The radio will remain tuned to the new station until you make ano[...]
-
Page 102
Bass and T reble T one Control The tone controls consist of 2 separate bands. The bass band is on the left, and the treble band is on the right. Each band is adjusted by a slider control with a detent at the mid-position. Moving the control up or down in- creases or decreases amplification of that band. The mid position provides a flat frequency re[...]
-
Page 103
Selective Music Search Press the SEEK button up or down to move the track number to skip forward or backward 1 to 7 selections. Press the SEEK button once to move 1 selection, twice to move 2 selections, etc. Fast Forward And Rewind Buttons Pressing the TUNE button up or down momentarily activates Fast Forward or Rewind and makes the direc- tional [...]
-
Page 104
Seek Button Press the SEEK up or down to select another track on the same disc. A SEEK symbol will appear on the display . Fast Forward And Rewind Buttons Press and hold the FF button for fast forward. Press and hold the R W button for fast reverse. The audio output can be heard when fast forward and fast reverse are activated. Random Play (RND) Pr[...]
-
Page 105
Radio Display Messages Y our radio has been designed to display certain messages when a problem is detected with the CD player . SALES CODE RBK—AM/ FM STEREO RADIO WITH CD PLA YER AND CD CHANGER CONTROLS Radio Operation Power/V olume Control Press the ON/VOL contr ol to turn the radio on. T urn the volume control clockwise to increase the volume.[...]
-
Page 106
Seek Press and release the SEEK button to search for the next station in either the AM or FM mode. Press the top of the button to seek up and the bottom to seek down. The radio will remain tuned to the new station until you make another selection. Holding the button in will by- pass stations without stopping until you release it. T une Press the TU[...]
-
Page 107
Y ou may add a second station to each push-button by repeating the above procedur e with this exception: Press the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 10 AM and 10 FM stations to be locked into push-button memory . The stations stored in SE[...]
-
Page 108
display will show the track number and index time in minutes and seconds. Play will begin at the start of track one. Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the [...]
-
Page 109
CD Changer Operation — If Equipped MODE Press the MODE button to select between the cassette tape player , CD player , and the CD changer (if equipped). Disc/Program Button 1 Press the DISC (button 1) button to play the next avail- able disc. Random Play — RND/Program Button 4 Press the RND (button 4) button while the CD is playing to activate [...]
-
Page 110
6 DISC CD CHANGER — IF EQUIPPED The CD changer is located below the radio in the instrument panel. The changer plays only 4 3 ⁄ 4 inch (12 cm) discs. The changer holds up to 6 discs. Each disc is loaded and ejected through a single slot in front of the changer . Each disc has a number ed button with an amber light above it which, when illuminat[...]
-
Page 111
Playing Discs The radio will show the CD number , the CD track number , and the T rack T ime Elapsed while the radio is in the CD mode. If more than one CD is loaded in the changer , the changer will automatically play the next disc after playing the last track of the current disc. Seek Button Press the top of this button on the radio once to play [...]
-
Page 112
Time Button Press this button to switch between time of day and CD track time. Changing Modes While in the radio mode, if a cassette is loaded, press the Mode button to switch to the tape mode. If a CD is loaded, press the Mode button to select the CD mode. If neither a tape nor CD is loaded, the radio will ignore the command. • Inserting either [...]
-
Page 113
5. A loose tape should be corr ected before use. T o r ewind a loose tape, insert the eraser end of a pencil into the tape drive gear and twist the pencil in the requir ed directions. Maintain your cassette tape player . The head and capstan shaft in the cassette player can pick up dirt or tape deposits each time a cassette is played. The result of[...]
-
Page 114
RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the operation of a cellular phone in your vehicle can cause erratic or noisy perfor- mance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactoril[...]
-
Page 115
to the O (Off) position to shut off the fan and to prevent any outside air from entering the vehicle. This also turns off the A/C compressor . T emperature Control Use this control to regulate the temperature of the air inside the passenger compartment. The blue area of the control indicates cooler temperatures while the red area indicates warmer t[...]
-
Page 116
The warmer air goes to the floor outlets. This feature provides improved comfort during sunny but cool con- ditions. Floor Air is directed through the floor outlets with a lesser amount through the defrost and side win- dow demist outlets. Mix Air is dir ected thr ough the floor , defrost, and side window demist outlets. This setting works best in [...]
-
Page 117
NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C con- denser for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser as required. Fabric front fascia protectors may reduce air flow to the condenser , r educing air conditioning performa[...]
-
Page 118
Y ou also may choose to customize your comfort by selecting the fan speed and Mode. This will place the system into manual operation Interior A TC Sensors There are two interior sensors in the vehicle. The Sun Sensor is mounted in the center of the instrument panel near the windshield glass. The In-Car T emperature Sen- sor is mounted behind the A [...]
-
Page 119
Comfort Control Use this control to regulate the comfort inside the pas- senger compartment. Press the top of the switch to raise the temperature selection and the bottom of the switch to lower it. The comfort setting range is from Lo, 60, 61,....to 89,90, Hi, for automatic temperature control. Y ou can select a very hot or cold comfort setting by [...]
-
Page 120
NOTE: The Recirc button light will blink if you try to use it in the Mix or Defrost modes. Air Direction Buttons (Mode) These buttons allow you to select from five air distribu- tion patterns. These buttons should be used only when you can not achieve comfort or visibility in Auto opera- tion. A symbol in the display window will show which mode is [...]
-
Page 121
NOTE: The air conditioning compressor is on in this mode. This dehumidifies the air to help dry the wind- shield. T o impr ove fuel economy , leave in the defrost mode only when necessary . Rear Window Defroster Press the button once to turn on the Rear W indow Defroster and a second time to turn it off. An indicator light to the right of the contr[...]
-
Page 122
Side Window Demisters Side window demisters are located on the instrument panel. These non adjustable outlets direct air toward the side windows in any mode except Panel or Panel Recir- culation. The air is directed toward the area of the side windows through which you view the outside rearview mirrors. Rear Seat Air Outlets The center console on v[...]
-
Page 123
Operating T ips (Manual A/C and A TC) UNDERST ANDING YOUR INSTRUMENT P ANEL 123 4 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 124
Outside Air Intake Make sur e that the air intake directly in front of the windshield is free of obstructions. Leaves, snow , etc., could block air flow into the vehicle. 124 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 125
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 1 2 7 ▫ Normal Starting ...................... 1 2 7 ▫ Extremely Cold W eather (Below -20°F Or -29°C) ................. 1 2 7 ▫ If Engine Fails T o Start ................. 1 2 8 ▫ After Starting ........................ 1 2 9 䡵 Engine Block Heater — Option[...]
-
Page 126
▫ T ire Chains .......................... 1 4 0 ▫ Snow T ires .......................... 1 4 0 ▫ T read W ear Indicators .................. 1 4 1 ▫ Replacement T ires ..................... 1 4 1 ▫ T ire Rotation Recommendations ........... 1 4 2 ▫ Alignment And Balance ................. 1 4 3 䡵 Fuel Requirements ..................... [...]
-
Page 127
ST ARTING PROCEDURES W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat build up may cause serious injury or death. The gear selector must be in the NEUTRAL or P ARK position before you can start the engine. Apply the brakes before shifting to any driving gear . Normal Starting Normal Starting of either[...]
-
Page 128
If Engine Fails T o Start CAUTION! Do not try to push or tow your vehicle to get it started. Y our vehicle cannot be started this way . Pushing with another vehicle may damage the trans- axle or the rear of your vehicle. See Section 6 of this manual for the proper jump starting procedures. W ARNING! Never pour fuel or other flammable liquid into th[...]
-
Page 129
After Starting The idle speed will automatically decrease as the engine warms up. At cooler ambient temperatures, the idle speed for the 2.7L engine may increase during extended idles for improved heater performance. ENGINE BLOCK HEA TER — Optional U.S. and Standard Canada These heaters use a common power cord which is stored under the hood, behi[...]
-
Page 130
T ransaxle Reset Mode The transaxle is monitored for abnormal conditions. If a condition is detected that could cause damage, the trans- axle automatically shifts into second gear . The transaxle remains in second gear despite the forward gear selected. Park (P), Reverse (R), and Neutral (N) will continue to operate. This Reset featur e allows the [...]
-
Page 131
W ARNING! Never use the Park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. “R” Reverse Shift into this range only after the vehicle has come to a complete stop. “N” Neutral The engine may be started in this range. Use this ran[...]
-
Page 132
“L” Low This range should be used for maximum engine braking when descending steep grades. In this range, up-shifts will occur only to prevent engine over speed while down shifts occur as early as possible. P ARKING BRAKE When the parking brake is applied with the ignition on, the r ed Brake light in the instrument cluster will come on. NOTE: T[...]
-
Page 133
When parking on a hill, you must set the parking brake before placing the gear selector in Park. If you don’t, the load on the transmission locking mechanism may make it difficult to move the selector out of Park. As an added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The parki[...]
-
Page 134
BRAKE SYSTEM Y our vehicle is equipped with power brakes as standard equipment. In the event you lose power assist for any reason (for example, repeated brake applications with the engine off), the brakes will still function. The effort requir ed to brake the vehicle will be substantially in- creased over that requir ed with the power system oper- [...]
-
Page 135
All vehicle wheels and tires must be the same size and tires must be properly inflated to produce accurate signals for the ABS computer . However , the system will compensate when the compact spare is in use. During stops where ABS is activated, a vibration of the brake pedal may be felt and associated system noises may be heard. W ARNING! Pumping [...]
-
Page 136
• The system has been deactivated to prevent damage to the brake system due to overheated brake temperatures. NOTE: Extended heavy use of T raction Control may cause the system to deactivate and turn on the T raction Control OFF Light, indicated by TRAC OFF , located in the instrument cluster . This is to pr event overheating of the brake system [...]
-
Page 137
2. Economy— Improper inflation pressur es can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will r educe tr ead life r esulting in a need for earlier tire replacement. Under inflation also increases tire r olling resistance and results in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabilit[...]
-
Page 138
period. The cold inflation pressur e must not exceed the maximum values molded into the tire side wall. T ire pressur e may increase from 2 to 6 psi [.13 to.41 bars](14 to 41 kPa) during operation. Do NOT r educe this normal pr essure build up or your tir e pr essure will be too low . The tire pressures shown on the tire label apply only to the tir[...]
-
Page 139
Compact Spare Tire Maintain the compact spare tire inflation pressure at 60 psi [4.1 bars](414 kPa). Do not exceed 50 mph (80 km/h) while the compact spare is installed on the vehicle. Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. Beca[...]
-
Page 140
Tire Spinning When stuck in mud, sand, snow , or ice conditions, do not spin your vehicle’s wheels above 30 mph. (48 km/h). See the paragraph on Freeing A Stuck V ehicle in section 6 of this manual. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode[...]
-
Page 141
T read Wear Indicators T read wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves and will appear as bands when the tread depth becomes 1/16 inch (2 mm). When the indicators appear in 2 or more adjacent gr ooves, the tire [...]
-
Page 142
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]
-
Page 143
Rotate your tires at intervals shown on the maintenance schedules. More frequent rotation is permissible if de- sired. The reasons for any rapid or unusual wear should be corrected before rotating. The suggested rotation method is the “forward-cross” shown in the diagram. Alignment And Balance The suspension components of your vehicle should be[...]
-
Page 144
Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and should be reported to your dealer immediately . Engine damage resulting from operating with a heavy spark knock may not be covered by the new vehicle warranty . Poor quality gasoline can cause problems such[...]
-
Page 145
CAUTION! DO NOT use gasolines containing Methanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system com- ponents. Problems that result from using methanol/gasoline blends are not the responsibility of the manufactur er and may not be cover ed by the vehicle warranty . While MTBE is an oxygenat[...]
-
Page 146
unleaded gasoline having lower sulfur to determine if the problem is fuel related prior to returning your vehicle to an authorized dealer for service. CAUTION! If the Malfunction Indicator Light is flashing, imme- diate service is required. See the On Board Diagnos- tics paragraph in the Maintenance section of this manual. Materials Added to Fuel A[...]
-
Page 147
W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling. Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door , on the passen- ger’s side of the vehicle. If the gas cap is lost or damaged, be sure the repl[...]
-
Page 148
VEHICLE LOADING The load carrying capacity of your vehicle is shown in the following sample chart and on the tire pressur e label attached to the driver’s door . V ehicle Loading Capacities Front Seat Occupants .................... 2 o r 3 Rear Seat Occupants ........................ 3 Luggage ....................... 1 1 5 lbs. (52 kg) Rated V eh[...]
-
Page 149
NOTE: Using the “3” range while operating the vehicle under heavy operating conditions will improve perfor- mance and extend transaxle life by reducing excessive shifting and heat build up. • For vehicles equipped with autostick, by using the autostick mode, and selecting a specific gear range, frequent shifting can be avoided. The highest ge[...]
-
Page 150
I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 151
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 1 5 2 䡵 If Y our Engine Overheats ................ 1 5 2 䡵 Jacking And T ire Changing ............... 1 5 3 ▫ Preparations For Jacking ................ 1 5 4 ▫ Jacking And Changing a T ire ............. 1 5 4 ▫ Compact Spare T ire-For T emporary Emergency U[...]
-
Page 152
HAZARD W ARNING FLASHER The flasher switch is on the steering column, just behind the steering wheel. Push in the flasher switch and all front and rear directional signals will flash. Press the flasher switch a second time to turn the flashers off. Do not use this emergency warning system when the vehicle is in motion. Use it when your vehicle is d[...]
-
Page 153
the fan control to High. This allows the heater core to act as a supplement to the radiator and aids in r emoving heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until th[...]
-
Page 154
Preparations For Jacking • T urn on the Hazard W arning Flashers and park the vehicle on a firm level surface, avoiding ice or slippery areas. • Put the gear shift in P ARK (Automatic transmission) or REVERSE (Manual T ransmission). • Set the parking brake and turn off the engine. W ARNING! Do not attempt to change a tire on the side of the v[...]
-
Page 155
2. Remove the spare tire, scissors, jack and lug wrench. 3. Before raising the vehicle, use the lug wrench to loosen the lug nuts of the flat tire. 4. T urn the jack scr ew clockwise to firmly engage the jack saddle with the lift area of the sill flange, use the lift area closest to the flat tire. WHA T TO DO IN EMERGENCIES 155 6 I n f o r m a t i [...]
-
Page 156
5. Raise the vehicle just enough to remove the flat tire and install the spare tire. 6. Remove the lug nuts, wheel cover (if equipped) and tire. Remove the cover by hand, do not pry off. 7. Mount the spare tire. For vehicles equipped with wheel covers, see the wheel cover installation instruc- tions. Do not attempt to install a wheel cover on a com[...]
-
Page 157
1 1. Stor e the flat tire, jack and tools. W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicl[...]
-
Page 158
3. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover . 4. Return to Changing a T ire Section, Item #8 above. JUMP-ST ARTING THE BA TTER Y W ARNING! T ake care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. Y[...]
-
Page 159
W ARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush the contaminated area immediately with large quantities of water . A battery generates hydrogen gas w[...]
-
Page 160
Check the Battery T est Indicator . If a light or bright colored dot is visible in the indicator , DO NOT jump-start the battery . If the indicator is dark or shows a green dot, proceed as follows: 1. W ear eye protection and remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. 2. When boost i[...]
-
Page 161
5. Connect the other cable, first to the negative jump start attachment of the booster battery and then to the engine of the vehicle with the dischar ged battery . Make sure you have a good contact on the engine. 6. Start the engine in the vehicle which has the booster battery , let the engine idle a few minutes, then start the engine in the vehicl[...]
-
Page 162
1. Slow down during rainstorms or when r oads are slushy . 2. Slow down if road has standing water or puddles. 3. Replace tires when tread wear indicators first become visible. 4. Keep tires properly inflated. 5. Maintain suf ficient distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. NOTE: If so equ[...]
-
Page 163
TOWING A DISABLED VEHICLE Only two ways of towing ar e approved; front towing and flat bed towing. CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • Always use wheel lift equipment when towing from the front. The only other approved method of towing is with a[...]
-
Page 164
I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 165
MAINT AINING YOUR VEHICLE CONTENTS 䡵 2.7L Engine .......................... 1 6 7 䡵 3.5L Engine .......................... 1 6 8 䡵 Onboard Diagnostic System (OBD II) ....... 1 6 9 䡵 Emissions Inspection And Maintenance Programs ............................ 1 7 0 䡵 Replacement Parts ..................... 1 7 1 䡵 Dealer Service ..........[...]
-
Page 166
▫ Fuel System Hoses .................... 1 9 4 ▫ Automatic T ransaxle ................... 1 9 4 ▫ Appearance Care And Protection From Corrosion ........................... 1 9 7 䡵 Fuses ............................... 2 0 1 ▫ Fuse Block Relays ..................... 2 0 1 ▫ Underhood Fuses ..................... 2 0 2 䡵 Replacement Bulb[...]
-
Page 167
2.7L ENGINE MAINT AINING YOUR VEHICLE 167 7 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 168
3.5L ENGINE 168 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 169
ONBOARD DIAGNOSTIC SYSTEM (OBD II) T o meet new government regulations and promote cleaner air , your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are operating properly , your vehicle will [...]
-
Page 170
EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states which have an I/M (Inspection and Maintenance) requir ement, this check verifies the following: the MIL (Malfunction Indic[...]
-
Page 171
If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or had a battery failure or replacement, you may need to do nothing mor e than drive your vehicle as you normally would in order for your OBD system to update. A recheck with the above test routine may then indicate tha[...]
-
Page 172
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance ser[...]
-
Page 173
The best time to check the oil level is about 5 minutes after a fully warmed up engine is shut off or before starting the engine after it has sat overnight. 3.5L Engine Oil Dipstick Engine Oil Dipstick MAINT AINING YOUR VEHICLE 173 7 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 174
Checking the oil while the vehicle is on level gr ound also will improve the accuracy of the oil level readings. Maintain the oil level between the MIN and MAX markings on the dipstick. Adding one quart of oil when the reading is at the MIN mark will result in a MAX reading on these engines. Change Engine Oil Road conditions and your kind of drivin[...]
-
Page 175
• More than 50% of your driving is at sustained high speeds during hot weather above 90°F (32°C) • T railer towing • T axi, police, or delivery service (commer cial operation) • Off road or desert operation • If equipped for and operating with E —85 (ethanol) fuel NOTE: If ANY of these apply to you then change your engine oil every 3,[...]
-
Page 176
American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). W e only recommend API Certified en- gine oils that meet the requir e- ments of DaimlerChrysler’s Mate- rial Standar d MS-6395. Use Mopar or an equivalent oil meeting the specification MS[...]
-
Page 177
The proper SAE viscosity grade of engine oil should be selected based on the following recommendations and be within the operating temperature shown in the engine oil viscosity charts. SAE 10W -30 oil is pr eferred for use in 3.5L engines within the operating temperatures shown in the viscosity chart. SAE 5W -30 engine oil is allowed for use in the[...]
-
Page 178
on how and where used oil can be safely discarded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change. Engine Oil Filter Selection All of this manufacturer’s engines have a full-flow type disposable oil filter . Use a filter of this type for replace- ment. The quality of replacement filters varies c[...]
-
Page 179
Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to seek service to assur e proper catalyst operation and prevent possible catalyst damage. If the Malfunction Indicator light is flashing, immediate service is requir ed. CAUTION! Damage to the catalytic converter can result if yo[...]
-
Page 180
Engine T iming Belt Replace the engine timing belt at the intervals described in the appropriate maintenance schedule. Crankcase Emission Control System Proper operation of this system depends on freedom from sticking or plugging due to deposits. As vehicle mileage builds up, the PCV valve and passages may accumulate deposits. If a valve is not wor[...]
-
Page 181
Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed. NOTE: The battery is stored in a compartment in front of the tire in the right front fender and is accessible through the engine compartment. The tire and wheel need not be removed to a[...]
-
Page 182
CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion. Apply[...]
-
Page 183
Power Steering Fluid Check W ARNING! Fluid level should be checked with the engine off to prevent injury from moving parts. Do not overfill. Use only manufacturer’s recommended power steer- ing fluid, refer to Recommended Fluids, Lubricants and Genuine Parts for the correct fluid type. During scheduled maintenance, check the power steering fluid [...]
-
Page 184
Chassis Lubrication Front Suspension Ball Joints Inspect these ball joints whenever your vehicle is ser- viced. They are permanently lubricated and do not requir e periodic lubrication. Steering Linkage Inspect tie rod ends whenever the vehicle is serviced. They are permanently lubricated and do not require periodic lubrication. Drive Shaft Univers[...]
-
Page 185
Hood Latch When performing other under hood services, the hood latch release mechanism and safety catch should be inspected, cleaned, and lubricated. It is important to maintain proper lubrication to insure that the hood mechanisms work properly and safely . Multi-Purpose Lubricant, NLGI Grade 2, should be ap- plied sparingly to all pivot and slidi[...]
-
Page 186
• T runk latches • Ash tray • Door Check Straps Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non abrasive cleaner . This will remove accumula- tions of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of[...]
-
Page 187
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if exhaust fumes can be detected inside the vehicle; or when the underside or rear of the vehicle is damaged; have a competent mechanic inspect the comp[...]
-
Page 188
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition key to the OFF position. The fan is temperature con- trolled and can start at any time the ignition key is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you see or[...]
-
Page 189
coolant in open containers or allow it to remain in puddles on the ground. Prevent ingestion by animals or children. If ingested by a child, contact a physician immediately . Selection Of Coolant Use only the manufacturer’s recommended coolant. Re- fer to the Recommended Fluids, Lubricants and Genuine Parts section for the correct coolant type. C[...]
-
Page 190
W ARNING! The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an over- heated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove the pressure cap while t[...]
-
Page 191
Points to Remember NOTE: When the vehicle is stopped after a few miles of operation, you may observe vapor coming from the front of the engine compartment. This is normally a result of moisture from rain, snow , or high humidity accumulat- ing on the radiator and being vaporized when the thermostat opens, allowing hot water to enter the radia- tor [...]
-
Page 192
Pay particular attention to those hoses nearest to high heat sources such as the exhaust manifold. Inspect hose routing to be sure hoses do not touch any heat source or moving component that may cause heat damage or mechanical wear . Insure nylon tubing in these areas has not melted or collapsed. Inspect all hose connections such as clamps and coup[...]
-
Page 193
NOTE: Often, fluids such as oil, power steering fluid, and brake fluid are used during assembly plant operations to ease the assembly of hoses to couplings. Therefore, oil wetness at the hose-coupling area is not necessarily an indication of leakage. Actual dripping of hot fluid when systems are under pressure (during vehicle operation) should be n[...]
-
Page 194
W ARNING! Use of a brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard pro- longed braking. Y ou could have an accident. Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter . Do not allow petroleum base flu[...]
-
Page 195
CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to the Recommended Fluids, Lubricants [...]
-
Page 196
Procedure For Checking Fluid Level T o pr operly check the automatic transaxle fluid level, the following procedure must be used: • The vehicle must be on level ground. • The engine should be running at curb idle speed for a minimum of 60 seconds. • Fully apply parking brake. • Place the gear selector momentarily in each gear position endin[...]
-
Page 197
CAUTION! Do not overfill. Dirt and water in the transaxle can cause serious damage. T o prevent dirt and water from entering the transaxle after checking or replen- ishing fluid, make certain that the dipstick cap is seated properly . Fluid and Filter Changes Automatic transmission fluid and filter should be changed as follows: Maintenance schedule[...]
-
Page 198
The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation. • Stone[...]
-
Page 199
• It is important that the drain holes in the lower edges of the doors, rocker panels and rear deck lid be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immediately . The cost of such repairs is considered the responsibility of the owner . • Use Mopar touch up paint on scratches or chips as soon[...]
-
Page 200
CAUTION! The use of vinyl, leather or plastic protectants may cause excessive gloss and/or discoloration of interior trim parts. Leather Seat Care and Cleaning Leather is best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather surface and should be removed immediately with a d[...]
-
Page 201
Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. • Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe [...]
-
Page 202
Underhood Fuses A Power Distribution center is located in the engine compartment. This center contains fuses and relays for circuits that operate only under the hood. A label which identifies these components is located on the underside of the cover . CAUTION! When replacing a blown fuse, it is important to use only a fuse having the correct ampera[...]
-
Page 203
Cavity Fuse Circuits 8 10 Amp Red Airbag 9 10 Amp Red T urn Signal Lights, T urn Signal/Hazard Indicator 10 15 Amp Lt. Blue Right Low Beam 1 1 20 Amp Y ellow High Beam Relay , High Beam Indicator , High Beam Switch 12 15 Amp Lt. Blue Left Low Beam Headlight 13 10 Amp Red Fuel Pump Relay , Power T rain Control Module 14 10 Amp Red Cluster , Day/Nigh[...]
-
Page 204
REPLACEMENT BULBS Interior Light Bulbs Bulb No. Cluster Illumination ..................... PC194 T urn Signal ........................... PC194 Climate Control .......................... 3 3 0 Overhead Console, Front Reading, Courtesy , Grab Handle ................................ 1 9 2 T runk ................................. 9 0 6 Exterior Light [...]
-
Page 205
4. Remove the bulb from the socket and replace the bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes into contact with any oily surface, clean the bulbs with rubbing alcohol. 5. Reinsert the bulb and socket assembly and turn the retaining ring clockwise to secure the bul[...]
-
Page 206
Fog Light 1. Remove the screw securing the fog light to the fascia and pull the light away from the vehicle to expose the bulb. 2. Remove the bulb by turning counter-clockwise. Pull the bulb out of the light housing. 3. Remove the wiring connector from the bulb. 4. Insert the new bulb and turn clockwise. 5. Connect the wiring connector to the new b[...]
-
Page 207
T ail, Stop, Back Up, and T urn Signal Lights 1. Open the trunk and remove the fasteners securing the light housing to the body . 2. Pull the light housing from the body to expose the wiring socket. 3. T urn the bulb socket counterclockwise to remove fr om the housing. Pull the bulb from the socket. 4. Replace the bulb, reinstall the socket, and re[...]
-
Page 208
SPECIFICA TIONS ENGINE ALL Oil Filter Mopar 5281090 or equivalent Thermostat 180°F (82°C) Spark Plug See Underhood Label Spark Plug Gap See Underhood Label Firing Order 1-2-3-4-5-6 FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 17 Gallons 64 Liters Engine Oil with Filter 2.7 & 3.5 Liter Engine 5 Qts 4.7 Liters Cooling System* 2.7 Liter Engi[...]
-
Page 209
RECOMMENDED FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant or Genuine Part Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) Engine Oil Use API Certified (GF-3). Refer to oil viscosity chart for correct SAE grade. Spark Plugs Refer to the V ehicle Emission[...]
-
Page 210
Body Component Fluid, Lubricant or Genuine Part Hinges: Door , Hood and T runk Mopar 威 Engine Oil Hood hinge springs and links Mopar 威 Spray White Lube Latches: Door and Hood T runk Mopar 威 Multi-Purpose Lube NLGI Grade 2 Mopar 威 Spray White Lube Door check straps Mopar 威 Spray White Lube W indow System Components Mopar 威 Spray White Lu[...]
-
Page 211
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 2 1 2 䡵 Maintenance Schedules .................. 2 1 2 ▫ Schedule “B” ........................ 2 1 5 ▫ Schedule “A” ........................ 2 2 2 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 212
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliabi[...]
-
Page 213
NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first and follow schedule “B” of the ⬙ Maintenance Schedules ⬙ section of this manual. NOTE: Most vehicles are operated under the conditions listed for Schedule ⬙ B ⬙ . Second is Schedule “A” . It is for vehicles [...]
-
Page 214
Once a Month • Check tire pressur e and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transaxle and add as needed. • Check all lights and all other electrical items for correct operation. • C[...]
-
Page 215
SCHEDULE “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (96 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 . • Day or night temperatures are below 32° F (0° [...]
-
Page 216
Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (14 000) (19 000) (24 000) (29 000) Change engine oil and engine oil filter . XXXXX X Inspect the air cleaner filter and replace if re- quired.* XXXX X Replace the air cleaner filter . *X Inspect the front and rear brake linings and rotors. XX Adjust the drive belt tension. [...]
-
Page 217
Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (34 000) (38 000) (43 000) (48 000) (53 000) (58 000) Change engine oil and engine oil filter . XXXXX X Inspect the air cleaner filter and replace if re- quired.* XXX X X Replace the air cleaner filter . X Inspect the front and rear brake linings and rotors. XX Adjust the drive belt tensi[...]
-
Page 218
Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (62 000) (67 000) (72 000) (77 000) (82 000) (86 000) Change engine oil and engine oil filter . XXXXX X Inspect the air cleaner filter and replace if re- quired.* XX XX X Replace the air cleaner filter . *X Adjust the drive belt tension. X Inspect the front and rear brake linings and roto[...]
-
Page 219
Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (91 000) (96 000) (101 000) (106 000) (110 000) (1 15 000) Change engine oil and engine oil filter . XXXXX X Inspect the air cleaner filter and replace if re- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and rear brake linings and rotors. XX Replace the drive belt[...]
-
Page 220
Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (120 000) (125 000) (130 000) (134 000) (139 000) (144 000) Change engine oil and engine oil filter . XXXXX X Inspect the air cleaner filter and replace if re- quired.* XXXX Replace the air cleaner filter . *X Replace the air cleaner filter . X Adjust the drive belt tension. X X Inspect t[...]
-
Page 221
Miles 93,000 96,000 99,000 100,000 102,000 105,000 (Kilometers) (149 000) (154 000) (158 000) (160 000) (163 000) (168 000) Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if re- quired.* XXX X Replace the air cleaner filter . X Inspect the front and rear brake linings and rotors. X Flush and replace t[...]
-
Page 222
SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (19 000) (29 000) (38 000) (48 000) (58 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Inspect the air cleaner filter and replace if re- quired.* X XXX X Replace the air cleaner filter . *X Adjust the drive belt tensio[...]
-
Page 223
Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (67 000) (77 000) (86 000) (96 000) (106 000) (115 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X XXXX Inspect the air cleaner filter and replace if requir ed.* XX X X X Replace the air cleaner filter . *X Replace the drive belts. X Inspect the f[...]
-
Page 224
Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (125 000) (134 000) (144 000) (154 000) (163 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if re- quired.* XX X X Replace the air cleaner filter . *X Adjust the drive belt tension. X Inspect the front and r[...]
-
Page 225
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. SCHEDULE “A” 225 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i[...]
-
Page 226
I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 227
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 2 2 8 ▫ Prepar e For The Appointment ............ 2 2 8 ▫ Prepar e A List ........................ 2 2 8 ▫ Be Reasonable W ith Requests ............. 2 2 8 䡵 If Y ou Need Assistance .................. 2 2 8 䡵 W[...]
-
Page 228
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]
-
Page 229
This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact th[...]
-
Page 230
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the U[...]
-
Page 231
W ARRANTY INFORMA TION See your manufacturer’s W arranty Information Booklet for information on warranty coverage and transfer of warranty . MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer . They will help you keep your vehicle operating at its best. REPORTING SAFETY DEFECTS In the 50 United S[...]
-
Page 232
T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1-800-424-9393 (or 366-0123 in W ash- ington DC area) or write to: NHTSA, U.S. Dept. of T ransportation, W ashington DC 20590. Y ou can also obtain other information about motor vehicle safety from the Hotline. In Canada: If you believe that your vehicle has a safety defect[...]
-
Page 233
PUBLICA TION ORDER FORMS 9 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 234
I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 235
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car . All Passenger Car T ires Must Con[...]
-
Page 236
T emperature Grades The temperature grades are A (highest), B, and C, repre- senting the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life[...]
-
Page 237
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :[...]
-
Page 238
About Y our Brakes ...................... 1 3 4 ABS (Anti-Lock Brake) System ........... 91,134 Accident Damage ....................... 1 9 9 Adding Engine Coolant (Antifreeze) ......... 1 8 9 Adding Fuel .......................... 1 4 6 Air Cleaner , Engine ..................... 1 8 0 Air Conditioner Maintenance .............. 1 8 2 Air Conditioni[...]
-
Page 239
Location ......................... 159,181 Saving Feature .................... 60,61,63 Belts, Engine .......................... 1 8 0 Body Mechanism Lubrication .............. 1 8 4 Brake, Parking ......................... 1 3 2 Brake System ....................... 134,192 Anti-Lock ........................... 1 3 4 Fluid Check ...................[...]
-
Page 240
W ashing ............................ 1 9 8 W axing ............................. 1 9 8 Wheels ............................. 1 9 9 W indshield W iper Blades ............... 1 8 6 Climate Control ........................ 1 1 4 Clock ................................. 9 3 Coat Hook ............................. 5 2 Compact Disc Maintenance ...........[...]
-
Page 241
Door Opener , Garage ..................... 7 0 Drive Belts ............................ 1 7 8 Drive Shaft Universal Joints ............... 1 8 4 Driving On Slippery Surfaces .................. 1 6 1 W ith an Automatic T ransaxle ............ 1 2 9 Electric Remote Mirrors ................... 5 4 Electronic Speed Control .................. 6 7 Emerge[...]
-
Page 242
Additives ........................... 1 4 6 Filler Cap ........................... 1 4 7 Filter .............................. 1 8 0 Gauge .............................. 8 8 Light ............................... 8 8 Materials Added ...................... 1 4 6 Octane Rating ........................ 1 4 3 System Hoses ........................ 1 9 4 [...]
-
Page 243
Instrument Cluster ..................... 87,88 Instrument Panel and Controls .............. 8 6 Instrument Panel Cover .................. 2 0 0 Instrument Panel Lens Cleaning ............ 2 0 1 Interior Fuses .......................... 2 0 2 Interior Lights .......................... 6 0 Introduction ............................ 4 Jack Operation ..[...]
-
Page 244
Headlights ........................... 6 2 Headlights On Reminder ................ 6 2 High Beam Indicator ................... 8 9 Illuminated Entry ...................... 1 4 Instrument Cluster ..................... 6 1 Interior ........................... 14,60 License ............................. 2 0 7 Low Fuel ............................ 8 8 [...]
-
Page 245
Electric Remote ....................... 5 4 Outside ............................. 5 4 Rearview ............................ 5 3 V anity .............................. 5 5 Mopar Parts ........................ 171,231 Multi-Function Control Lever ............... 6 3 Occupant Restraints ...................... 2 6 Odometer .............................[...]
-
Page 246
Pregnant W omen and Seat Belts ............. 3 2 Programmable Electronic Features ......... 71,75 Programming T ransmitters ............ 20,71,75 Radial Ply T ires ........................ 1 3 8 Radiator Cap .......................... 1 8 9 Radio ........................... 93,100,105 Radio Operation ........................ 1 1 4 Rear W indow Defr[...]
-
Page 247
Service Engine Soon Light ................ 1 6 9 Service Manuals ........................ 2 3 3 Setting the Clock ........................ 9 3 Shoulder Belts .......................... 3 1 Side Airbag ............................ 3 8 Side V iew Mirror Adjustment ............... 5 4 Side W indow Demisters .................. 1 2 2 Signals, T urn ....[...]
-
Page 248
Radial ............................. 1 3 8 Replacement ......................... 1 4 1 Rotation ............................ 1 4 2 Snow T ires .......................... 1 4 0 Spare T ire ........................... 1 3 9 Spinning ............................ 1 4 0 T read W ear Indicators .................. 1 4 1 T o Open Hood .....................[...]
-
Page 249
W arning Flasher , Hazard ................. 1 5 2 W arnings and Cautions .................... 6 W arranty Information ................. 148,231 W ashers, W indshield .................... 1 8 6 W ashing V ehicle ........................ 1 9 8 W axing and Polishing ................... 1 9 8 W ind Buffeting ......................... 7 7 W indows Power[...]