Dukane 8767A manual

P or table LCD Pr ojector Models 8767A, 8771, 8070 User's Manual[...]

[...]

i Important Information Safety Cautions Precautions Please read this manual carefully bef ore using your Dukane Projector and k eep the manual handy f or future reference . Y our serial number is located on the bottom of your projector . CA UTION T o tur n off main po wer , be sure to remov e the plug from power outlet. The power outlet soc ket sho[...]

ii Important Information RF Interference (for USA only) W ARNING The F ederal Communications Commission does not allow an y modifications or changes to the unit EXCEPT those specified by NEC Soluctions (America), Inc. in this manual. F ailure to comply with this gov er nment regulation could void y our right to operate this equipment. This equipmen[...]

iii Important Information Fire and Shock Pr ecautions 1. Ensure that there is sufficient v entilation and that vents are unobstructed to pre vent the build-up of heat inside y our projector. Allow at least 3 inches (10 cm) of space between y our projector and a wall. 2. Pre vent f oreign objects such as paper clips and bits of paper from f alling i[...]

iv Lamp Replacement • T o replace the lamp , follo w all instr uctions pro vided on page 53 . • Be sure to replace the lamp when the message “The lamp has reached the end of its usab le life. Please replace the lamp. ” appears. If you continue to use the lamp after the lamp has reached the end of its usab le lif e, the lamp bulb ma y shatte[...]

v T able of Contents Impor tant Information ......................................................................... i 1. Introduction ...................................................................................... 1  What's in the Box? .................................................................................................[...]

vi T able of Contents 4. Convenient Featur es .................................................................... 33  T urning Off the Image and Sound ............................................................................... 33  F reezing a Picture ( 8767A/8070 only) ... .................................................................[...]

1  What's in the Box? Make sure y our box contains e ver ything listed. If any pieces are missing, contact your dealer . Please sav e the or iginal bo x and packing materials if you e ver need to ship y our projector . Z O O M F O CU S SELECT LAM P ST ATUS PO WER VIDE OS - V I D E O CO MPU TER - 1 C OM PUTE R-2 ON /S TAND B Y AU TO ADJ. Pro[...]

2 1. Introduction  Intr oduction to the Projector This section introduces y ou to your new Dukane Projector and describes the features and con trols. Congratulations on Y our Purchase of The Dukane Projector The 8767A/8070/8771 is one of the v er y best projectors av ailable today . The this projector enables y ou to project precise images up to[...]

3 NOTE: Composite video standards are as follows: NTSC: U.S. TV standard for video in U.S. and Canada. P AL: TV standar d used in W estern Europe. P AL-N: TV standar d used in Argentine, Paraguay and Uruguay . P AL-M: TV standard used in Brazil. P AL60: TV standar d used for NTSC playback on P AL TVs. SECAM: TV standard used in France and Eastern E[...]

4 1. Introduction  Part Names of the Pr ojector ZOOM F O CU S SE LE C T L A M P S T A T U S P O W E R V I D E O S -V ID E O C O M P U T E R - 1 C O M P U T E R - 2 O N / S T A N D B Y A U T O A D J. AC IN ZOOM F OCU S S E LECT LAM P STATUS PO WER V IDEO S-VIDEO COMPUTER-1 COM PUTER-2 ON/STAND BY AUTO ADJ. AUDIO OUT S-VIDEO IN COMPUTER 1 IN COMPU[...]

5 1. Introduction For 8767A and 8070 only Attaching the supplied carrying handle Y ou can carr y the projector by attaching the supplied carrying handle securely to the projector . T o attach the supplied carr ying handle , use the supplied flathead screwdriver and two scre ws. Place a soft cloth on the working surf ace before turning the projector[...]

6 1. Introduction T op Features LAMP STATUS POWER VIDEO AUTO ADJ. S-VIDEO COMPUTER-1 COMPUTER-2 ON/STAND BY SELECT 12 13 10 2 3 4 11 15 6 7 8 9 1. PO WER Button (ON / ST AND BY) ( ) Use this button to turn the pow er on and off when the main power is supplied and the projector is in standb y mode. T o tur n on the projector , press and hold this bu[...]

7 1. Introduction AUDIO OUT AUDIO S-VIDEO IN COMPUTER 2 IN VIDEO IN COMPUTER 1 IN MONITOR OUT PC CONTROL L/MONO R AUDIO L/MONO R AUDIO 4 1 32 5 T erminal Panel Features 1. COMPUTER 1 and 2 IN / Component Input Connector (Mini D-Sub 15 Pin ) Connect your computer or other analog RGB equip- ment such as IBM compatib le or Macintosh comput- ers. Use t[...]

8 1. Introduction  Part Names of the Remote Contr ol NOTE: If you are using a Macintosh computer , you can click either the MOUSE R-CLICK or MOUSE L-CLICK button to activate the mouse. 1. Infrared T ransmitter Direct the remote control to ward the remote sensor on the projector cabinet. 2. PO WER ON Button When the main pow er is on, you can use[...]

9 16. A UTO ADJ . Button Use this button to adjust an RGB source f or an opti- mal picture. See page 31 . 17. V OLUME (+)(–) Button Press (+) to increase the v olume and (–) to decrease it. 18. ASPECT Button Press this b utton once to display the Aspect Ratio select menu. K eep pressing will change aspect ratios. See page 42 . 19. PICTURE Butto[...]

10 1. Introduction 30 ° 30 ° 30 ° 30 ° Remote Control Pr ecautions • Handle the remote control carefully . • If the remote control gets wet, wipe it dr y immediately . • Av oid excessiv e heat and humidity . • If you will not be using the remote control for a long time , remov e the batteries. • Do not place the batter ies upside down[...]

11 1. Introduction SOURCE PIC-MUTE POWER ASPECT SELECT 3 6 4 2 1 8 7 5 9 For 8771 1. Infrared T ransmitter Direct the remote control to ward the remote sensor on the projector cabinet. 2. MENU Button Displa ys the menu f or various settings and adjust- ments. 3. SELECT 왖왔왗왘 / V olume Buttons 왖왔 : Use these b uttons to select the menu of[...]

12 1. Introduction CR2025 CR2025 30 ° 30 ° 30 ° 30 ° Remote Control Pr ecautions • Handle the remote control carefully . • If the remote control gets wet, wipe it dr y immediately . • Av oid excessiv e heat and humidity . • If you will not be using the remote control for a long time , remov e the batter y . • Do not place the batter y[...]

13 This section describes how to set up y our projector and how to connect video and audio sources. 2. Installation and Connections  Setting Up the Scr een and the Projector Selecting a Location The fur ther y our projector is from the screen or wall, the larger the image . The minimum size the image can be is appro ximately 21" (0.53 m) me[...]

14 2. Installation and Connections[...]

15 2. Installation and Connections Lens Center Throw Angle ( 움 ) Throw Distance (C) Screen center Screen Diagonal Screen Width Screen Height Screen Bottom (B) (D) A C I N Throw Distance and Scr een Size The f ollowing shows the proper relativ e positions of the projector and screen. Refer to the tab le to deter mine the position of installation. [...]

16 2. Installation and Connections W ARNING * Installing your projector on the ceiling m ust be done by a qualified technician. Contact your AV dealer f or more inf or mation. * Do not attempt to install the projector yourself . • Only use your projector on a solid, le vel surf ace. If the projector f alls to the ground, you can be injured and th[...]

17 2. Installation and Connections  Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector . * If the screen go[...]

18 NOTE: An image may not be displayed correctly when a Video or S-Video sour ce is played back via a commercially available scan converter . This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of th[...]

19 2. Installation and Connections Connecting an External Monitor MONITOR OUT AUDIO AC IN AUDIO OUT MONITOR OUT PC CONTROL AUDIO S-VIDEO IN COMPUTER 2 IN VIDEO IN COMPUTER 1 IN AUDIO L/MONO R AUDIO L/MONO R MONITOR OUT Y ou can connect a separate, e xter nal monitor to y our projector to simultaneously view on a monitor the RGB analog image you&apo[...]

20 AUDIO IN LR AUDIO OUT L R Component YC bC r AC IN AUDIO OUT MONITOR OUT PC CONTROL AUDIO S-VIDEO IN COMPUTER 2 IN VIDEO IN COMPUTER 1 IN AUDIO L/MONO R AUDIO L/MONO R COMPUTER 1 IN AUDIO 2. Installation and Connections NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output require[...]

21 2. Installation and Connections AUDIO IN LR AUDIO OUT L R VIDEO OUT S-VIDEO VIDEO AC IN AUDIO OUT MONITOR OUT PC CONTROL AUDIO S-VIDEO IN COMPUTER 2 IN VIDEO IN COMPUTER 1 IN AUDIO L/MONO R AUDIO L/MONO R S-VIDEO IN VIDEO IN AUDIO AUDIO Connecting Y our VCR or Laser Disc Player S-Video cab le (not supplied) Video cable (not supplied) VCR/ Laser [...]

22 2. Installation and Connections A C IN ZOOM F O CU S SE LECT L A M P STA T U S P O W E R V ID E O S -V ID E OC O M P U TE R -1 C O M P U T E R -2 O N / ST A N D B Y AUT O ADJ. AUDIO OUT S-VIDEO IN COMPUTER 1 IN COMPUTER OUT PC CONTROL AUDIO AUDIO COMPUTER 2 IN VIDEO IN AUDIO L/M ON O R AUDIO L/M ON O R Connecting the Supplied Power Cable Connect[...]

23 3. Pr ojecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen.  T ur ning on the Pr ojector NOTE: • The projector has two power switches: a main power switch and a POWER (ON/ST AND BY) button . • When plugging in or unplugging the supplied power cable, make sure that[...]

24 3. Projecting an Image (Basic Operation) Note on Startup scr een (Menu Language Select screen) When you first turn on the projector , you will get the Star tup menu. This men u gives y ou the oppor tunity to select one of the 8 menu languages . T o select a menu langua g e, follo w these steps: 1. Use the SELECT 왖 or 왔 button to select one o[...]

25 3. Projecting an Image (Basic Operation)  Selecting a Sour ce Selecting the computer or video source VIDEO S-VIDEO COMPUTER-1 COMPUTER-2 LAMP STATUS POWER AUTO ADJ. ON/STAND BY SELECT VOLUME L-CLICK MOUSE R-CLICK AUTO ADJ. ASPECT HELP FREEZE PICTURE S-VIDEO VIDEO COMPUTER 1 2 NOTE: T urn on the computer or VCR connected to the projector . Usi[...]

26 3. Projecting an Image (Basic Operation) Detecting the Signal A utomatically Press and hold the SOURCE button f or a minimum of 1 second, the projector will search f or the next a vailab le input source. Each time you press and hold the SOURCE button f or a minimum of 1 second, the source will change as f ollows: 8771 Computer 1 → Computer 2 ?[...]

27 3. Projecting an Image (Basic Operation) Place your projector on a flat le vel surf ace and ensure that the projector is square to the screen. Lift the front edge of the projector to center the image v er tically . * If the projected image does not appear square to the screen then use the K eystone f eature f or proper adjustment. See page 29 . [...]

28 3. Projecting an Image (Basic Operation) A C I N Z O O M F O C U S ZOO M F O C U S A C I N Z O O M F O C U S F O C U S Focus Use the FOCUS ring to obtain the best focus . Zoom Use the ZOOM le ver to finely adjust the image size on the screen. NOTE: Digital Zoom can cause result in a blurry image because zooming is made electronically . 8767A/807[...]

29  Corr ecting Keystone Distortion Auto Keystone Correction The A uto K eystone correction feature will correct the v er tical distor tion of a projected image on the screen. No special operation required. Just put the projector on a flat surf ace. Note that the v er tical ke ystone angle can be corrected between 30 degrees upward and 30 degree[...]

30 3. Projecting an Image (Basic Operation) 5. Press the MENU button to c lose the menu. NOTE: Y ou can save the changes using the Keystone Save feature when you turn off the projector . See page 42 .[...]

31 3. Projecting an Image (Basic Operation)  Optimizing RGB Pictur e Automatically Adjusting the Image Using Auto Adjust Optimizing an RGB image automatically . Press the A uto Adjust button to optimize an RGB image automatically . [P oor picture] [Nor mal picture] VIDEO AUTO ADJ. S-VIDEO COMPUTER-1 COMPUTER-2 VOLUME S-VIDEO VIDEO L-CLICK MOUSE [...]

32  T ur ning of f the Projector T o turn off the projector: 3. Projecting an Image (Basic Operation) LAMP STATUS POWER VIDEO AUTO ADJ. S-VIDEO COMPUTER-1 COMPUTER-2 ON/STAND BY SELECT POWER SOURCE PIC-MUTE ASPECT SELECT L-CLICK ENTER EXIT MENU UP MAGNIFY PAGE OFF POWER ON PIC-MUTE DOWN R-CLICK First, press the PO WER (ON/ST AND BY) button on th[...]

33 4. Convenient Featur es 쐃 T ur ning of f the Image and Sound Press the PIC-MUTE button to turn off the image and sound f or a shor t period of time. Press again to restore the image and sound. ENTER EXIT MENU UP MAGNIFY PAGE OFF POWER ON PIC-MUTE DOWN SOURCE PIC-MUTE SELECT 쐇 Fr eezing a Picture ( 8767A/8070 only) Press the FREEZE button to [...]

34 4. Convenient Features  Using Remote Mouse Receiver ( 8767A/8070 ) The remote mouse receiv er enables y ou to operate your computer’ s mouse functions from the remote control. It is a great con venience f or clicking through y our computer-generated presentations. Connecting the remote mouse r eceiver to your computer If y ou wish to use th[...]

35  Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU b utton on the remote control or projector cabinet to displa y the Menu. 5. Using On-Scr een Menu ENTER EXIT UP MAGNIFY PAGE OFF POWER ON PIC-MUTE DOWN MENU SOURCE PIC-MUTE SELECT 2. Press the SELECT 왖[...]

36 5. Using On-Screen Menu 4. Use the SELECT 왖왔 buttons on the remote contr ol or the projector cabinet to select the item you want to adjust or set. ENTER EXIT MENU UP MAGNIFY PAGE OFF POWER ON PIC-MUTE DOWN SOURCE PIC-MUTE SELECT 5. Adjust the level or turn the selected item on or off b y using SELECT 왗 or 왘 buttons on the remote contr ol[...]

37 5. Using On-Screen Menu 쐇 Menu Elements Highlight Title Slide bar Off Timer remaining time Source Radio button Solid triangle Check mark Ta b Thermometer symbol K ey symbol Menu windo ws or dialog box es typically hav e the follo wing elements: Title .......................................... Indicates the menu title. Highlight ...............[...]

38 쐋 List of Menu Items 5. Using On-Screen Menu Picture W all Color Off , Blackboard, Light yello w , Light green, Light blue, Sky b lue, Light rose, Pink Picture Management Presentation, Video, Mo vie, Graphic , sRGB User Base Setting Presentation, Video, Movie , Graphic, sRGB Gamma Correction Dynamic, Blac k Detail, Natural Brightness R,G,B Con[...]

39 5. Using On-Screen Menu NOTE: Some menu items are not available depending on the input source. Default F actor y Def ault Current Signal All Data Clear Filter Usage Clear Lamp Hour Meter Information P age1 Remaining Lamp Time, Lamp Hour Meter , Filter Usage, Projector Usage, BIOS V ersion, Firmware V ersion, Data V ersion P age2 Source Inde x, H[...]

40 5. Using On-Screen Menu 쐏 Menu Descriptions & Functions [Pictur e] Using the W all Color Correction [W all Color] This function allows f or quick adaptive color correction in applications where the screen material is not white . The f ollowing eight options are av ailable . • OFF • Blackboard • Light y ellow • Light green • Light[...]

41 5. Using On-Screen Menu NOTE: When “sRGB”, “Graphic”, “Video” or “Movie” is selected, the brightness decreases slightly when compared to “Presenta- tion”. This is not a malfunction. User Adjust (when using User) When selecting user adjustable presetting (User), the submen u will be display ed. Y ou can customize each gamma or[...]

42 5. Using On-Screen Menu 쐄 Menu Descriptions & Functions [Image] Enabling Auto Keystone [Auto Keystone] This feature allo ws the projector to detect its tilt and correct ver tical distor tion automatically . T o tur n on the A uto K eystone f eature, select “On”. Correcting V ertical Keystone Distortion Manually [Keystone] Y ou can corr[...]

43 5. Using On-Screen Menu Adjusting the V ertical Position of Image [Cinema Position] (for Cinema only) This f eature adjusts the ver tical position of the image when vie wing video with Cinema aspect ratio selected. When “Cinema” is selected in “Aspect Ratio”, the image is displa yed with b lack borders on the top and bottom. Y ou can adj[...]

44 5. Using On-Screen Menu Selecting Menu Language [Language] Y ou can choose one of 21 languages for on-screen instructions. Selecting Menu Color [Menu Color Select] Y ou can choose between two color modes f or menu color : color and monochrome. Selecting Menu Display Time [Menu Display Time] This option allows y ou to select how long the projecto[...]

45 5. Using On-Screen Menu 쐆 Menu Descriptions & Functions [Advanced] Security A ke yword can be set f or your projector to a void operation b y an unauthorized user using the Menu. When a k eyword is set, turning on the projector will display the K eyword input screen. Unless the correct keyw ord is entered, the projector cannot project an i[...]

46 5. Using On-Screen Menu 3 . T ype in the same combination of SELECT buttons 왖왔왗왘 and press the ENTER button. The confirmation screen will be display ed. 4. Select “Y es” and press the ENTER button. The Security function has been enabled. T o disable the Security function: 1. Select [Adv anced] → [Security] and press the 왘 button [...]

47 5. Using On-Screen Menu Disabling the Cabinet Buttons [Cabinet Button Lock] This option turns on or off the Cabinet Button Lock function. NOTE: • This Cabinet Button Lock does not affect the remote control and the PC Control functions. • When the cabinet buttons are unlocked, pressing and holding the EXIT button for about 10 seconds will cha[...]

48 5. Using On-Screen Menu (Adv anced Pa ge 2) Enabling Power Management [Power Management] When this option is on and there is no input f or five minutes or more , the projector will automatically tur n itself off . T urning On Noise Reduction [Noise Reduction] (not available f or Video and S-Video signals) Reduces video noise. Select “On” to [...]

49 5. Using On-Screen Menu [Phase] (av ailable f or RGB and HDTV signals only) Use this item to adjust the clock phase or to reduce video noise , dot interf erence or cross talk. (This is evident when par t of y our image appears to be shimmering.) Use “Phase” only after the “Clock” is complete. This adjustment is made automatically when th[...]

50 5. Using On-Screen Menu 쐎 Menu Descriptions & Functions [Default] Returning to Factor y Default [Factory Default] The F actor y Def ault feature allows y ou to change adjustments and setting to the factory preset. [Current Signal] Resets the adjustments f or the current signal to the factory preset le vels. The items that can be reset are:[...]

51 6. Maintenance Z OO M F O CU S S E L E C T L A M P S T A T U S P O W E R V I D E O S - V I D E O C O M P U T E R - 1 C O M P U T E R - 2 O N / S T A N D B Y A U T O A D J . This section describes the simple maintenance procedures you should f ollow to clean the filter and replace the lamp .  Cleaning or Replacing the Filter The air-filter spo[...]

52 6. Maintenance 3. Reinstall the new filter co ver . NOTE: Do not wash the filter with soap and water . Soap and water will damage the filter membrane. Before replacing the filter , remove dust and dirt from the projector cabinet. Keep out dust and dirt during filter replacement. NOTE: When you replace the lamp, it is also wise to replace the fil[...]

53 쐋 Replacing the Lamp After your lamp has been oper ating for 2000 hours (up to 3000 hours in Eco mode) or longer , the LAMP indicator in the cabinet will blink red and the message will appear . Even though the lamp ma y still be working, replace it at 2000 (up to 3000 hours in Eco mode) hours to maintain optimal projector perf or mance . After[...]

54 3. Loosen the two scre ws securing the lamp housing until the phillips screwdriver goes into a freewheeling condition. The two scre ws are not remov able . Remove the lamp housing b y holding it. 6. Maintenance NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to cir cumvent this interlock. 4. Inser[...]

55 6. Maintenance 6. Finally , select the men u → [Default] → [Clear Lamp Hour Meter] to reset the lamp usage hours. NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode) of service, the projector cannot turn on and the menu is not displayed. If this happens, do the following while in standby condition to clear values for the Re[...]

56 7. Appendix  T roubleshooting This section helps you resolv e problems you ma y encounter while setting up or using the projector . Indicator Messages Power Indicator Indicator Condition Projector Condition Note Off Blinking light Steady light Green Orange Green Orange 0.5 sec On, 0.5 sec Off 2.5 sec On, 0.5 sec Off 0.5 sec On, 0.5 sec Off Th[...]

57 7. Appendix Common Problems & Solutions (See also "Pow er/Status/Lamp Indicator" on page 56 .) Does not turn on Will turn off No picture Picture suddenly becomes dark Color tone or hue is unusual Image isn’t square to the screen Picture is blurred Image is scrolling vertically , horizontally or both Remote control does not work I[...]

58 7. Appendix If there is no picture, or the picture is not display ed correctly . • Power on process for the projector and the PC. Be sure to connect the RGB cab le between the projector and the computer before turning on the computer . There are some notebook PCs, which do not output signal unless there is a projector or monitor connected firs[...]

59 7. Appendix  Specifications This section provides technical inf or mation about the 8767A/8070/8771 Projector's performance. Model Number 8767A/8070/8771 Optical LCD P anel 0.7" p-Si TFT active-matrix (with Micro Lens Arra y on 8767A only) Resolution 8767A/8771 : 1024 ⳯ 768 pix els* native , up to UXGA . 8070 : 800 ⳯ 600 pix els[...]

60 7. Appendix P ower Requirement 100 - 240V A C, 50 / 60 Hz Input Current 8767A/8070 : 2.7 - 1.4A (100 - 240V A C) 8771 : 2.1 - 1.2A (100 - 240V A C) P ower Consumption 8767A/8070 : 8W in Standby mode / 250W in Lamp Nor mal mode / 200W in Lamp Eco mode 8771 : 8W in Standby mode / 190W in Lamp Nor mal mode / 155W in Lamp Eco mode Mechanical Install[...]

61 7. Appendix  Cabinet Dimensions LAMP STATUS POWER VIDEO AUTO ADJ. S-VIDEO COMPUTER-1 COMPUTER-2 ON/STAND BY ZOOM FOCUS SELECT AC IN AUDIO OUT AUDIO S-VIDEO IN COMPUTER 2 IN VIDEO IN COMPUTER 1 IN MONITOR OUT PC CONTROL L/MONO R AUDIO L/MONO R AUDIO 112.5 (4.4) 260 (10.2) 20.3 (0.8) 64.6 (2.5) 294 (11.6) 71.5 (2.8) Lens center Lens center Unit[...]

62 7. Appendix[...]

63 Mini D-Sub 15 Pin Connector  Pin Assignments of D-Sub COMPUTER Input Connector Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL le vel 51 42 3 10 11 12 13 14 15 6 97 8 7. Appendix * Only COMPUTER 1 input connector suppor ted . Pin No. RGB Signal (Analog) YCbCr Signal 1R e d C r 2 Green or Sync on Green Y 3 Blue Cb 4 Ground 5 Gro[...]

64 7. Appendix  Compatible Input Signal List Signal Resolution F requency H. Refresh Rate ( Dots ) ( kHz ) ( Hz ) NTSC – 15.734 60 P AL – 15.625 50 P AL60 – 15.734 60 SECAM – 15.625 50 VESA 640 ⳯ 480 31.47 59.94 IBM 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 34.97 66.67 MAC 640 ⳯ 480 35 66.67 VESA 640 ⳯ 480 37.86[...]

65 7. Appendix  PC Contr ol Codes and Cable Connection PC Contr ol Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT COMPUTER 1 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT COMPUTER 2 02H 03H 00H 00H 02H 01H 02H 0AH INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH INPUT SELECT S-VIDEO 02H [...]

66 7. Appendix 1 2 54 3 6 7 8 T o RxD of PC PC Contr ol Connector (DIN-8P) T o TxD of PC T o GND of PC NOTE: Pins 2, 3, 5, 6 and 8 are used inside the projector .[...]

67 7. Appendix 쐆 Optional Pr esentation Remote Control Kit (PR52KIT) Part Names and Functions of the Remote Contr ol 1. Infrared T ransmitter/Laser P ointer T ransmits an infrared signal when an y button other than LASER is pressed. Direct the remote control tow ard the remote sensor on the projector cabinet. Beams a laser light when the Laser bu[...]

68 7. Appendix 8. POINTER Button Not av ailable on this model. 9. P AGE UP/DO WN Buttons* Use these buttons to oper ate your computer with the supplied remote mouse receiver . Y ou can use these buttons to scroll the vie wing area of the window or to mov e to the pre vious or next slide in P owerP oint on y our computer. 10. MENU Button Displa ys t[...]

69 7. Appendix 30 ° 30 ° 30 ° 30 ° Battery Installation 1 Remov e the batter y cov er. NOTE: Do not pull the battery cover by force. Doing so can result in it coming off. 2 Remov e both old batteries and install new ones (AAA). Ensure that you ha ve the batteries' po- larity (+/ –) aligned correctly . 3 Slip the cov er back o ver the bat[...]

70 7. Appendix Using the Laser Pointer Y ou can use the laser to draw your audience's attention to a red dot that y ou can place on any object. CA UTION: • Do not look into the laser pointer while it is on. • Do not point the laser beam at a person. • Do not allow c hildren to use the laser pointer . Press and hold the LASER button to ac[...]

71 No image is displayed from your PC or video equipment to the projector . Still no image even though you connect the projector to the PC first, then start the PC. Enabling your notebook PC’ s signal output to the projector . • A combination of function keys will enable/disable the ex- ternal display . Usually , the combination of the “Fn”[...]

72 7. Appendix In the space below please describe your problem in detail. Information on application and environment where your projector is used Pr ojector Model number: Serial No.: Date of pur chase: Lamp operating time (hours): Lamp Mode: 䡺 Normal 䡺 Eco Information on input signal: Horizontal synch frequency [ ] kHz Vertical synch frequency [...]

[...]

Dukane Corporation Audio Visual Products Division 2900 Dukane Drive St. Charles, IL 60174-3395 E-mail: avsales@dukcorp.com Phone: (630) 762-4040 Orders: (800) 676-2485 Fax: (630) 584-5156 Parts & Service: (800) 676-2487 Fax: (630) 584-0984 Audio Visual Products P ar t # 401-8767A_8771_8070-00[...]