Eizo CE210W manual

Impor tant Ple ase re ad thi s U ser ’ s M an ual ca ref ull y t o f amili ariz e y our sel f w ith sa f e and ef f ectiv e usa ge pro ced ure s . Ple ase re tai n t his ma nu al f or fu tur e ref ere nce . About TCO'03 .......................................................... 48 FCC Declaration of Conf ormit y .............................[...]

2 SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the saf ety symbols below . The y denote critical information. Please read them carefully . W ARNING F ailure to abide by the information in a W ARNING ma y result in ser ious injur y and can be lif e threatening. CA UTION F ailure to abide by the inf or mation in a CA UTION ma y result in moderate i[...]

PRECA UTIONS 3 PRECA UTIONS IMPOR T ANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • T o ensure personal safety and proper maintenance, please read this s[...]

4 PRECA UTIONS W ARNING Place the unit at the strong and stab le place . A unit placed on an inadequate surface may fall and result in injur y or equipment damage. If the unit falls , disconnect the power immediately and ask your dealer f or advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. OK[...]

PRECA UTIONS 5 W ARNING When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely . Not doing so may cause the unit to come unattached, which ma y result in injur y or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a [...]

6 PRECA UTIONS LCD P anel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity , use of a monitor in lower brightness is recommended. The LCD panel is manuf actured using high-precision technology . How ev er , note that the appearance of any missing pix els or lit pixels does not indicate damage to the [...]

1. INTRODUCTION 7 1. INTR ODUCTION Thank you very much for choosing an EIZO Color Monitor . 1-1. Features CE210W • 21" wide format LCD • Dual inputs compliant (DVI-I x 2) • DVI Digital input (TMDS ) compliant • [Horizontal scanning frequency] Analog: 24 - 82 kHz Digital: 31 - 65 kHz [V ertical scanning frequency] Analog: 49 - 86 Hz (12[...]

8 1. INTRODUCTION 1-2. P acka ge Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged. • LCD Monitor • Power Cord • Analog Signal Cable (FD-C16) • Digital Signal Cable (FD-C39) • EIZO USB Cable (MD-C93) • "EIZO LCD Utility Disk" CD-ROM • Calibration software "ColorNa[...]

1. INTRODUCTION 9 1-3. Contr ols & Connector s Front SIGNAL AUTO ENTER (1) (4) (2) (6) (7) (3) (8) (5) (1) ScreenManager ® Monitor Adjustment menu (2) Monitor Adjustment menu Directly touching the left or right button allows y ou to select a FineContras t mode. (3) Input Signal Selection Switch(SIGNAL) Switch the input signals when connecting [...]

10 1. INTRODUCTION Rear / Side / Bottom (CE210W is given as an example.) (9) Stand (Detachable) The LCD monitor can be used with an optional arm stand by removing the stand (See " 6. A TT A CHING AN ARM "). (10) Security Lock Slot Allows f or connection of a security cable. This lock suppor ts K ensington's MicroSav er security syste[...]

2. CABLE CONNECTION 11 2. CABLE CONNECTION 2-1. Bef ore Connecting Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency) in accordance with the charts below . Tips • It is recommended to use this monitor in the digital signal input. • When your computer and display support VESA DDC, the suitable[...]

12 2. CABLE CONNECTION Digital Input The monitor supports the following resolutions only . CE210W Resolution Frequency Dot Clock Remarks 640×480 60Hz 120 MHz (Max.) V GA 720×400 70Hz V GA TEXT 800×600 60Hz VESA 1024×768 60Hz VESA 1280×960 60Hz VESA 1280×1024 60Hz VESA 1680×1050 60Hz VESA CVT RB (Reduced Blanking) CE240W Resolution Frequency [...]

2. CABLE CONNECTION 13 Analog Input Signal Cable Connector of the PC PC Signal Cable (FD-C16 enclosed) Video Output Connector / D-Sub mini 15 pin Input Connector(monitor) / D VI • Standard graphics card • P ow er Macintosh G3 (Blue & White) / P ow er Mac G4 (V GA) Digital Input Signal Cable Connector of the PC PC Signal Cable (FD-C39 enclos[...]

14 2. CABLE CONNECTION 4 Lead the power cord and signal cable into the cable holder at rear of the monitor . NO TE • The cables are recommended to lead with slight sag for the smooth motion of the stand. 5 Adjust the "height", "front and back position" and "angle" of the monitor . 1. Adjust the height of the monitor [...]

2. CABLE CONNECTION 15 6 T urn on the monitor's Power switch and then turn on the PC's power . The monitor's power indicator will light up (blue). If an image does not appear , refer to the " 7. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and the monitor . Tips • When turning on the monitor , the kind[...]

16 2. CABLE CONNECTION 2-3. Connecting T w o PCs to the Monitor T wo PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor . Connecting Examples SIGNAL1 SIGNAL2 (Ex.1) Analog D-Sub mini 15 pin Signal Cable (FD-C16 enclosed) Signal Cable (FD-C39 enclosed) D VI Digital (Ex.2) Analog D-Sub[...]

2. CABLE CONNECTION 17 Priority setting P erformance 1 If signals from both inputs are present, the monitor gives pref erence to Signal 1 in the f ollowing cases. • When the power of the monitor is turned ON. • When the signal input to Signal 1 is changed e ven if activ e input was Signal 2. 2 If signals from both inputs are present, the monito[...]

18 3. ScreenManager 3. ScreenManager 3-1. Ho w to use the ScreenManager ScreenManager allows you to adj ust screen perform ance though the ma in menu and select a FineContrast mode easily . NO TE • Main Menu and FineContrast Menu cannot be activated at the same time. 1 Entering the ScreenManager T ouch the Enter switch once to display the main me[...]

3. ScreenManager 19 3-2. ScreenManager Adjustments and Settings The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates adjustments of analog input only and "**" indicates digital input only . Main menu Sub menu Reference Screen Clock * 4-1. Screen Adjustment.. Phase * P osition * Resol[...]

20 3. ScreenManager Tips • When the main menu of ScreenManager is displayed on the screen, the FineContrast Menu cannot be activated. Exit Press the Enter switch to exit the menu. FineContrast Mode Selectable FineContrast modes are as follows. Mode Description sRGB T o display the screen images based on those original colors (e x. over the Intern[...]

3. ScreenManager 21 3-4. Useful Functions Adjustment Loc k Use the "Adjustment Lock" function to prevent any accidental changes. Lock ed function • Adjustments and settings in the ScreenManager • A uto Adjustment Switch Unlock ed function • Selecting of the FineContrast mode b y the Directing Switch / Adjustments • Brightness adju[...]

22 3. ScreenManager P ower Indicator Setting Light off the power indicator . This function is available for the multiple panels settings. [Procedure] 1. Select <Power Indicator> in the ScreenManager <Others> menu. 2. Select "Disable". EIZO Logo Appearing Function When turning on the monitor , the EIZO logo is displayed for a w[...]

4. ADJUSTMENT 23 4. ADJUSTMENT 4-1. Screen Adjustment NO TE • Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. The monitor displa ys the digital input image correctly based on its pre-setting data. Analog Input Screen adjustments for the LCD monitor should be used in suppressing screen flickering and al[...]

24 4. ADJUSTMENT 3 Adjust by using <Screen> menu in the ScreenManager . (1)V ertical bars appear on the screen Use the <Clock> adjustment. Select the <Clock> and eliminate the vertical bars by using the Right and Left of the Directing switches. Do not continuously touch the Directing switches, as the adjustment value will change q[...]

4. ADJUSTMENT 25 (4)Screen image is smaller or larger than the actual screen images. Use the <Resolution> adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select <Resolution> and confirm if the resolution now being displayed is the same as the input resolution. If i[...]

26 4. ADJUSTMENT 4-2. Displa ying Lo wer Resolutions The lower resolutions are enlarged to full screen automatically . Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1 Enlarge the screen size when displaying a low resolution. Select the <Screen Size>. Select the <Screen Size> in the [...]

4. ADJUSTMENT 27 3 Set the brightness of the black area surrounding the displayed image. Set the <Border Intensity>. In the <Enlarge> mode or <Full Screen> mode, the outer area (border) is usually black. Select <BorderIntensity> in the <Others> menu and adjust by using the right and left switches. Border 4-3. Color Adj[...]

28 4. ADJUSTMENT Adjustment Contents Menu Function Descriptions Adjustable range Brightness T o set the br ightness of the screen 0~100% Tips • The values sho wn in the “%” are av ailable only as a ref erence tool. • Directly touching the Up and Down s witches also adjusts the brightness. T ouch the Enter s witch to sav e and exit the setti[...]

4. ADJUSTMENT 29 4-4. P o wer -save Setup The <PowerManager> menu in the ScreenManager enables to set the power -save setup. NO TE • Do your part to conserve energy , turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely . • Even if the monitor is in [...]

30 5. MAKING USE OF USB (Universal Serial Bus) 5. M A K I N G U S E O F U S B ( U n i v e r s a l S e r i a l B u s ) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system en vir[...]

5. MAKING USE OF USB (Universal Serial Bus) 31 3 After setting up, the monitor's USB hub is available for connecting USB compliantperipherals to the downstream ports of the monitor . Connecting Examples Scanner K eyboard Mouse PC Downstream P or t: Connect the cables from USB complaint peripherals such as a mouse, k eyboard etc. Downstream P o[...]

32 6. A TT ACHING AN ARM 6. A TT A CHING AN ARM The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting. - Hole spacing on the arm mounting CE210W : 100 mm x 100[...]

6. A TT ACHING AN ARM 33 CE240W • Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant) 200 100 100 100 100 4 Mounting Screws (enclosed): M4 x 12 mm Arm-Stand: • Hole spacing on the arm mounting: 200 mm x 100 mm (VESA compliant) 200 100 100 100 100 6 Mounting Screws (enclosed): M4 x 12 mm Arm:[...]

34 7. TROUBLESHOO TING 7. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems See No.1 ~ No.2 • Imaging problems See No.3 ~ No.14 • Other problems See No.15 ~ No.18 • USB problems See No.19 ~ No.20 Prob lems P oints to chec k with P ossibleSolutions 1. No picture[...]

7. TROUBLESHOO TING 35 Prob lems P oints to chec k with P ossibleSolutions 6.The characters and images ha ve se v eral vertical bars on their right side. • Adjust the characters and images using the <Signal Filter>. 7.Horizontal bars of distor tion appear . • Decrease the horizontal bars using the <Phase> (page 24). 8.Letters and li[...]

36 7. TROUBLESHOO TING Prob lems P oints to chec k with P ossibleSolutions 18.The A uto adjustment switch does not oper ate. • Check that there is nothing left on the f ace of A uto Adjustment s witch. Wipe the control panel, and then touch the A uto Adjustment switch again with dry finger . • The adjustment lock is probab ly on. T o unlock: t[...]

8. CLEANING 37 8. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Never use thinner , benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet T o remove stains, wi[...]

38 9. SPECIFICA TIONS 9. SPECIFICA TIONS CE210W LCD P anel 53 cm (21.1 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: Horizontal: 178°, V er tical: 178° (CR: 10 or more) Dot Pitch 0.270mm Horizontal Scan F requency Analog 24~82kHz (A utomatic) Digital 31~65kHz V er tical Scan F requency Analog 49~86Hz (A utomatic) (1280 x[...]

9. SPECIFICA TIONS 39 CE240W LCD P anel 61 cm (24.1 inch), TFT color LCD panel with Anti-Glare, Viewing Angle: Horizontal: 178°, V er tical: 178° (CR: 10 or more) Dot Pitch 0.270mm Horizontal Scan F requency Analog 24~94 kHz (A utomatic) Digital 31~76 kHz V er tical Scan F requency Analog 49~86Hz (A utomatic) (1600 x 1200: 49 ~ 76 Hz / 1920 x 120[...]

40 9. SPECIFICA TIONS Default settings Brightness 30% Smoothing 3 T emperature 6500K FineContrast Mode Custom P ow erManager Analog input : VESA DPMS Digital input: D VI DMPM Screen Size Full Input Prior ity 1 Off Timer Disable Menu Settings Menu Size Normal Menu Off Timer 45 seconds Beep On Language English Beeper settings Shor t beep ScreenManage[...]

9. SPECIFICA TIONS 41 Dimensions <CE210W> mm (inch)[...]

42 9. SPECIFICA TIONS <CE240W> 566(22.3) 372(14.6) 294(11.6) 5° 25° 7.3(0.29) 357.2(14.1) 361.9(14.2) 60° 60.5(2.38) 23.5(0.93) 60(2.36) 85(3.35) 39.7(1.56) 530(20.9) φ230(9.1) 172° 172° 522(20.6) 24(0.94) 520.4(20.5) 326(12.8) 22.8(0.9) 25(0.98) 116(4.6) 14.5(0.57) 80(3.15) SWIVEL TILT ARCSWING 480(18.9) mm (inch)[...]

9. SPECIFICA TIONS 43 Pin Assignment DVI-I Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 19 20 21 17 18 22 23 24 C1 C2 C3 C4 C5 Pin No. Signal Pin No. Signal Pin No. Signal 1 TMDS Data 2- 11 TMDS Data1/3 Shield 21 NC * 2 TMDS Data 2+ 12 NC * 22 TMDS Clock shield 3 TMDS Data2/4 Shield 13 NC * 23 TMDS Clock+ 4 NC * 14 +5V P ower 24 TMDS Clock- 5 N[...]

44 10. GLOSSAR Y 10. GLOSSAR Y Clock With the analog input signal display , the analog signal is converted to a digital signal by the LCD circuitry . T o convert the signal correctly , the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some vertical bars o[...]

10. GLOSSAR Y 45 sRGB(Standard RGB) "International Standard for Red, Green, and Blue color space" A color space was defined with the aim of the color matching between applications and hardware devices, such as monitors, scanners, printers and digital cameras. As a standard default space, sRGB allows Internet users to closely match colors[...]

46 11. APPENDIX/ANHANG/ANNEXE 11. APPENDIX/ANHANG/ANNEXE Preset Timing Chart for Analog input Timing-Übersic hten für Analog Eingang Synchr onisation des Signaux pour Analog numerique NO TE • Based on the signal diagram shown below factory presets have been registered in the monitor's microprocessor . • Der integrierte Mikroprozessor des[...]

11. APPENDIX/ANHANG/ANNEXE 47 CE240W Mode Dot Clock MHz F requencies Sync P olarity Horizontal:kHz V er tical:Hz V GA 640×480@60Hz 25.2 MHz Horizontal 31.47 Negative V er tical 59.94 Negative V GA TEXT 720×400@70Hz 28.3 MHz Horizontal 31.47 Negative V er tical 70.09 P ositiv e Macintosh 640×480@67Hz 30.2 MHz Horizontal 35.00 Negativ e V er tical[...]

48 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impa[...]

49 For U.S.A. , Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-501 1 declare that the pr oduct T rade name: EIZO Model: ColorEdge CE210W/CE240W is in conformity with Part 15 of the FCC Rules. Operation of this produc[...]

50 Hinweise zur Auswahl des richtigen Schwenkarms für Ihr en Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. W enn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berüc[...]

51 Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der W iederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitt[...]

 [...]