Elmo P100 manual

DOCUMENT CAMERA INSTR UCTION MANU AL Please read this instruction manual carefully before using this product and k eep it f or future reference . P1 00 Deutch P000~P000 Français P000~P000 P00~P00 Deutch P000~P000 Français P000~P000 English P50~P97 50[...]

ENGLISH 51 IMPORT ANT SAFEGUARDS ■ Read Instructions – All the safety and operating instructions should be read before the appliance is operated. ■ Retain Instructions – The safety and operating instructions should be retained for future reference. ■ Heed Warnings – All warnings on the product and in the operating instructions should be[...]

ENGLISH 52 ■ Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unabl[...]

ENGLISH 53 ■ Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: ● When the power-supply cord or plug is damaged. ● If liquid has been spilled, or objects have fallen into the product. ● If the product has been exposed to rain or water. ● [...]

ENGLISH 54 W ARNING : Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. FOR UNITED ST A TES USERS: INFORMA TION This equipment has been tested and found to co[...]

ENGLISH 55 BEFORE YOU USE ■ The power cord applicable to the local power specifications is attached. Be sure to use the power cord applicable to your local power specification. ■ Do not leave this product under direct sunlight or by heaters, or this product may be discolored, deformed, or damaged. ■ Do not place this product in any humid, dus[...]

56 PART NAMES AND FUNCTIONS SETTING UP STORING OPERATION PROCEDURE VARIOUS FUNCTIONS AND OPERATIONS ABOUT RS-232C TROUBLESHOOTING SPECIFICATIONS ENGLISH[...]

57 PART NAMES AND FUNCTIONS SETTING UP STORING OPERATION PROCEDURE VARIOUS FUNCTIONS AND OPERATIONS ABOUT RS-232C TROUBLESHOOTING SPECIFICATIONS ENGLISH CONTENTS 1. PART NAMES AND FUNCTIONS Name of Each Part .......................................................59 Appearance ........................................................................5[...]

58 PART NAMES AND FUNCTIONS SETTING UP STORING OPERATION PROCEDURE VARIOUS FUNCTIONS AND OPERATIONS ABOUT RS-232C TROUBLESHOOTING SPECIFICATIONS ENGLISH CONTENTS 6. RS-232C SPECIFICATIONS Setting Up ..................................................................89 Cable Connection........................................................89 Data Fo[...]

ENGLISH PART NAMES AND FUNCTIONS 59 Open this cover when connecting/ disconnecting a cord. When carrying this product, do not hold this cord cover. 1 P ART NAMES AND FUNCTIONS Name of Each Part ■ Appearance Front Rear/Side Front Rear/side !1 ! 2 !3 !0 !4 q q q w w w e e e r r r y y y u u u i t t t o o o No. Name q Camera head w Lamp head e Setup [...]

ENGLISH PART NAMES AND FUNCTIONS 60 Functions ■ Front Operating Panel * Hereinafter the menu items to be displayed/selected on the monitor or projection screen are referred to as "OSD (On-Screen Display)". Name Function q LCD panel T o display the output image and the OSD w LAMP (Lamp) T o switch the illumination e TEXT (T ext mode) T o[...]

ENGLISH PART NAMES AND FUNCTIONS 61 ■ Rear Panel Name Function q DVI OUT T o output digital video signal to the projector , the Camera image (DVI Output T erminal) PC monitor or other DVI input device SD mode w RGB OUT T o output analog video signal to the projector , the Camera image (Analog RGB PC monitor or other RGB input device [RGB IN] imag[...]

ENGLISH PART NAMES AND FUNCTIONS 62 ■ Side Panel Name Function q USB T o enable the image transfer or the main unit control by (Compliant with 2.0) using the utility software on the supplied CD-ROM when the camera is connected to the PC w (SD Card Slot) T o insert an SD card T o remove the SD card, push it in once e Main Switch T o turn ON/OFF th[...]

ENGLISH PART NAMES AND FUNCTIONS 63 OSD (On-Screen Display) The menu items displayed/selected on the monitor or the projection screen are referred to as "OSD (On-Screen Display)". When the [MENU] button on the wireless remote control is pressed, the OSD menu appears on the monitor screen. (When this [MENU] button is pressed again, the OSD[...]

64 PART NAMES AND FUNCTIONS ENGLISH * [ ] indicates the factory default settings. The factory default settings of Flickerless vary according to the destination. The settings of USB Mode and Flickerless retain the last set state. ■ SD Mode (Menu when image stored in an SD card is in display) Name Function T op hierarchy 2nd hierarchy 3rd hierarchy[...]

65 PART NAMES AND FUNCTIONS ENGLISH Name Function T op hierarchy 2nd hierarchy 3rd hierarchy Slide Inter val 3 Sec T o set the inter val of slide show until displaying the next Show (Inter val of Image 5 Sec image from 3 to 30 sec Settings Feed) 10 Sec (Slide Show 15 Sec Set) 30 Sec Effect Left to right T o slide from left to right (Effect of Image[...]

66 PART NAMES AND FUNCTIONS ENGLISH Wireless Remote Control Name Function q PRESET (State Save) T o save the current setting state of the unit Use this function together with the memory No. w CALL (State Call) T o call the setting state Use this function together with the memory No. e (Memor y No.) T o indicate the memor y No. P .88 P .88 q w e r y[...]

67 PART NAMES AND FUNCTIONS ENGLISH The paused image cannot be processed in any other way. Name Function r (OSD MENU (Menu) To display/cancel the OSD t Operation) ENTER (Input) T o fix the OSD item y T o select the OSD item, and scroll the LCD monitor when (Directions) the digital zoom is used u (Menu Cancel) T o cancel the OSD from the screen when[...]

Infrared sensor 30 ° 30 ° 30 ° 30 ° 30 ° 30 ° 30 ° 30 ° 68 PART NAMES AND FUNCTIONS ENGLISH ■ Receivable Range Point the infrared emitting part of the wireless remote control at the infrared sensor of the main unit, and press the button for desired function. The receiving range may be reduced when the main unit is placed in direct sunligh[...]

q Locked Unloc ked setup grip w e 69 ENGLISH 2 SETTING UP Setting Up (1) Release the lock by turning the security lock. (2) As shown in the right figure, hold the setup grip and raise the camera column. At this time, the camera head slides up in conjunction with the rise of the camera column. The lamp column also rises together. (3) If necessary, m[...]

70 SETTING UP ENGLISH w setup grip If the camera column is pulled or pushed forcedly, the camera might be pushed out of position by a function not to break mechanical parts, and the camera image might be displaced from the display center. In this case, initialize the camera position as follows: (1) Fold the camera column on the stage. When the came[...]

71 SETTING UP ENGLISH Connecting of Video Cables To protect this product and the peripheral units to be connected to this product, be sure to turn OFF the power supply to all units beforehand. When plugging in/out the connection cable, hold the plug part of the cable. q Connecting to the PC with a USB cable Connect a USB cable to the [USB] terminal[...]

72 SETTING UP ENGLISH r Connecting to the unit having the analog RGB output terminal Connect the analog RGB cable to the [RGB IN] terminal on the rear panel. • Specifications of the analog RGB input terminal of this product Signal allocation Pin assignment t Connecting to the unit having the composite video input terminal Connect the video cable [...]

73 STORING ENGLISH 3 STORING Storing Locked Unloc ked (1 ) Return the lamp to the original position. Then, hold the setup grip of the camera column and fold the camera column. At this time, the camera head slides down and the lamp column also folds. (2) Lock the camera column and the lamp column by turning the security lock. Do not force down the c[...]

74 OPERATION PROCEDURE ENGLISH 4 OPERA TION PROCEDURE Presentation by Using Documents, Films, etc. When connecting this product and the peripheral units, be sure to turn OFF the power supply to all units beforehand. q Setting the main unit Set the main unit as show in the above figure, connect the main unit to the projector or the PC monitor, and t[...]

75 OPERATION PROCEDURE ENGLISH Before starting the operation, insert an optional SD card (Option) into the SD card slot on the side panel. Push it again to remove the SD card. When loading or unloading the SD card or the power is tuned off, be sure to select the camera image by pressing the camera button [] on the front operation panel or wireless [...]

76 OPERATION PROCEDURE ENGLISH ■ Saving the Image (1) Press the [] button on the front operating panel or wireless remote control to switch the image mode to the Camera mode. (2) Press the [] button on the wireless remote control. (3) When the [] mark lights up on the screen, the image saving starts. When this mark goes out, the image saving is c[...]

77 OPERATION PROCEDURE ENGLISH ■ Deleting the Image (1) Press the [] button on the front operating panel or wireless remote control to display the images stored in the SD card in the full screen display mode or the divided screen display mode. (2) Select the image to be deleted by using the direction buttons [] on the wireless remote control. (3)[...]

78 OPERATION PROCEDURE ENGLISH Presentation using the supplied software with the USB-connected PC Set [USB Mode] to [Application] on the OSD. "Utility Software" is available from the supplied CD-ROM supplied from us. "Utility Software" contains PC link software "Image Mate for Presentation" and TWAIN driver "ELMO [...]

79 OPERATION PROCEDURE ENGLISH Set [USB Mode] to [Mass Storage] on the OSD. When this product is USB-connected to the PC, image data in the SD card can be transferred into the PC. The Operating System (OS) of the connected PC should be Microsoft Windows 2000(SP4 or newer)/XP(SP2 or newer). (1) Turn ON the power supply to this product and to the PC.[...]

80 OPERATION PROCEDURE ENGLISH When the camera head is set horizontally for shooting ahead of this camera, the image can be rotated automatically by 180°. Shooting area when the close-up lens holder is opened: TELE (Telescopic): 500mm – ∞ from the zoom lens WIDE (Wide-angle): 100mm – ∞ from the zoom lens Shooting off the stage <Forward [...]

81 ENGLISH 5 V ARIOUS FUNCTIONS AND OPERA TIONS Lighting This camera is equipped with material illumination for presenting materials, such as printed matter, and base illumination for transparent materials, such as slide films and negative films. When the [ LAMP] button on the front operating panel or wireless remote control is pressed, the fluores[...]

82 ENGLISH Zoom When the zoom dial [ , ] on the front operating panel is turned or the zoom button [ , ] on the wireless remote control is pressed, the document display range can be adjusted. According to the zoom dial turning angle, the zooming speed varies in 3 steps (3-step speed change). ● Zoom magnification in the Camera mode When the optica[...]

83 VARIOUS FUNCTIONS AND OPERATIONS ENGLISH Image Selection Each time the [] , [] button and [] button on the front operating panel or wireless remote control are pressed, the image is switched among the camera image, the image inputted in the analog RGB input terminal [RGB IN] and the image stored in the SD card. When the PC or other unit is conne[...]

84 VARIOUS FUNCTIONS AND OPERATIONS ENGLISH ■ Input image signal that can be output from the video output terminal [VIDEO OUT] into the analog RGB input terminal [RGB IN] Signal Frequency Resolution (Number of lines) Polarity of synchronized signal (P: Positive, N: Negative) Mode name VGA1 VGA2 VGA3 VGA@60Hz VGA@72Hz VGA@75Hz VGA@85Hz SVGA@56Hz S[...]

85 VARIOUS FUNCTIONS AND OPERATIONS ENGLISH Focus The focus on the object is adjusted. ■ Auto Focus When the [AF] button on the front operating panel or wireless remote control is pressed, the camera is focused automatically. This product is of one-shot auto focus type. That is, once the camera is focused, the auto focus operation is released, an[...]

86 VARIOUS FUNCTIONS AND OPERATIONS ENGLISH ■ Manual Focus When the focus button [FOCUS · NEAR] or [FOCUS · FAR] on the wireless remote control is pressed, the height on which the camera is focused changes. This function is used for focusing the camera on any portion of a 3D object or the like. Limit of focus adjustment: • With close-up lens [...]

87 VARIOUS FUNCTIONS AND OPERATIONS ENGLISH Brightness Adjustment When the [BRIGHTNESS · ] button on the front operating panel or wireless remote control is pressed, brightness of the image is adjusted through the adjustment of the lens iris. Two adjustment modes are available for this adjustment. Each mode is set by the [BRIGHTNESS] item of the O[...]

88 VARIOUS FUNCTIONS AND OPERATIONS ENGLISH State Presetting The setting position of this product can be saved/called. Up to 8 positions can be saved. The presets that can be saved are as follows: • Current zoom field angle (Optical zoom range) • Brightness status • White Balance state • R-Gain (When the white balance is set to Manual) • [...]

89 ABOUT RS-232C ENGLISH Setting Up q Connect this product to a PC with an RS-232C cable. When using an RS-232C cable available on the market, make sure that pin connections are the same as below. To protect this product and the PC, be sure to turn OFF the power supply to all units before starting the connection work. w Start the PC, and set the co[...]

90 ABOUT RS-232C ENGLISH Data Format Specification This command is executed in the form of 1-command/1-packet. The next command is not accepted until the previous processing is completed. • The communication command always starts with STX (Start of Text), and ends with ETX (End of Text). • If the communication format of command name is wrong, N[...]

91 ABOUT RS-232C ENGLISH UART Communication Format Commands, parameters and data are all transmitted in ASCII code. T ransmission Specifications • Full duplex start-stop sync. mode • Start bit : 1 bit • Data bit : 8 bits • Stop bit : 1 bit • Parity bit : None • X parameter : None • Baud rate (Communication speed) : 9600bps Function Co[...]

92 ABOUT RS-232C ENGLISH Function Command Parameter Data Contents Slide-show image SE 0 (Left to right) ■■ T o set the visual effect of the slide show feed effect 1 (L T to RB) 2 (RT to LB) 3 (None) Slide-show object ST 0 (All) ■■ As a slide show target, select all images stored on file 1 (Locked) the SD card or only the locked image files [...]

93 ABOUT RS-232C ENGLISH Connection If the RS-232C cable is not connected correctly between this product and the PC, no acknowledgement is transmitted. Connect the RS-232C cable correctly, and fix it firmly with the connector set screws before starting the operation. For " ■■ " in the data column, transmit the SPACE [20H] twice. Funct[...]

94 TROUBLESHOOTING ENGLISH 7 TROUBLESHOOTING Check the following items. If any abnormality is found, consult the seller from whom you have purchased this product or our branch/office near your location. Symptoms and Confirmation Replacement of Lighting Lamp (Fluorescent Lamp) The lighting lamps (fluorescent lamps) are expendables. When any of them [...]

95 SPECIFICATIONS ENGLISH ■ General 8 SPECIFICA TIONS Item Specifications Power source 12VDC (AC adapter: 100 ~ 240VAC) Power consumption 30W (AC adapter included) Outside dimensions 457 × 562 × 138mm (18.0 × 22.1 × 5.4 in) (When folded) 457 × 519 × 587mm (18.0 × 20.4 × 23.1 in) (When set up) Weight Approx. 8.5kg (18.7 lbs) (Main body onl[...]

96 SPECIFICATIONS ENGLISH ■ Main Camera Item Specifications Lens f = 4.9 ~ 78.4mm (16-time zoom), F = 2.7 Shooting speed 30 frames/sec Shooting area SXGA 405 × 324mm (15.9 × 12.8 in) max. 30 × 24mm (1.2 × 0.9 in) min. HDTV 405 × 224mm (15.9 × 8.8 in) max. 30 × 17mm (1.2 × 0.7 in) min. XGA 405 × 303mm (15.9 × 11.9 in) max. 30 × 23mm (1.[...]

97 SPECIFICATIONS ENGLISH ■ Supplied Accessories For the RCA pin, use a pin plug compliant with EIAJ RC-6703. The above specifications are subject to change without notice. Trademark Acknowledgements is a trademark of ELMO Co., Ltd. VESA and SVGA are registered trademarks of Video Electronics Standards Association. SXGA, VGA and XGA are trademark[...]