Elmo p10 manual

VISU AL PRESENTER INSTR UCTION MANU AL Please read this instruction manual carefully before using this product and k eep it f or future reference . Deutch P000~P000 Français P000~P000 P00~P00 Deutch P000~P000 Français P000~P000 English P54~P105 54[...]

ENGLISH 55 IMPORT ANT SAFEGUARDS ■ Read Instructions – All the safety and operating instructions should be read before the appliance is operated. ■ Retain Instructions – The safety and operating instructions should be retained for future reference. ■ Heed Warnings – All warnings on the product and in the operating instructions should be[...]

ENGLISH 56 ■ Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unabl[...]

ENGLISH 57 ■ Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: ● When the power-supply cord or plug is damaged. ● If liquid has been spilled, or objects have fallen into the product. ● If the product has been exposed to rain or water. ● [...]

ENGLISH 58 W ARNING : Handling the cord on this product or cords associated with accessories sold with this product, will e xpose you to lead, a chemical known to the State of Calif or nia to cause bir th def ects or other reproductiv e har m. W ash hands after handling. FOR UNITED ST A TES USERS: INFORMA TION This equipment has been tested and fou[...]

ENGLISH 59 BEFORE YOU USE ■ The power cord applicable to the local power specifications is attached. Be sure to use the power cord applicable to your local power specification. ■ Do not leave this product under direct sunlight or by heaters, or this product may be discolored, deformed, or damaged. ■ Do not place this product in any humid, dus[...]

60 PART NAMES AND FUNCTIONS SETTING UP STORING OPERATION PROCEDURE VARIOUS FUNCTIONS AND OPERATIONS ABOUT RS-232C TROUBLESHOOTING SPECIFICATIONS ENGLISH[...]

61 PART NAMES AND FUNCTIONS SETTING UP STORING OPERATION PROCEDURE VARIOUS FUNCTIONS AND OPERATIONS ABOUT RS-232C TROUBLESHOOTING SPECIFICATIONS ENGLISH CONTENTS 1. PART NAMES AND FUNCTIONS Name of Each Part .......................................................63 Appearance ........................................................................6[...]

62 PART NAMES AND FUNCTIONS SETTING UP STORING OPERATION PROCEDURE VARIOUS FUNCTIONS AND OPERATIONS ABOUT RS-232C TROUBLESHOOTING SPECIFICATIONS ENGLISH CONTENTS Focus .........................................................................91 Auto Focus ..........................................................................91 Manual Focus......[...]

ENGLISH PART NAMES AND FUNCTIONS 63 o !0 ! ! ! No. Name o Side panel !0 Rear panel !1 Cord cover Open this cover when connecting/ disconnecting a cord. When carrying this product, do not hold this cord cover. q w e e e r r r t t t y u u u i 1 P ART NAMES AND FUNCTIONS No. Name q Camera head w Lamp head e Lamp column r Camera column t Infrared senso[...]

ENGLISH PART NAMES AND FUNCTIONS 64 Functions qw w r t yu i o !0 !1 !2 !3 w w e ■ Front Operating Panel * Hereinafter the menu items to be displayed/selected on the monitor or projection screen are referred to as "OSD (On-Screen Display)." Name Function q OSD ENTER (Fix) T o fix the OSD item, select an image from the images in Opera- th[...]

ENGLISH PART NAMES AND FUNCTIONS 65 q w e r t u y i ■ Rear Panel Name Function q DVI OUT T o output digital video signal to the projector , the Camera image (DVI Output T erminal) PC monitor or other DVI input device SD mode w RGB OUT T o output analog video signal to the projector , the Camera image (Analog RGB PC monitor or other RGB input devi[...]

ENGLISH PART NAMES AND FUNCTIONS 66 q w e r ■ Side Panel Name Function q USB T o transfer the data recorded in an SD card to the (Compliant with 2.0) connected PC, or to transfer image or control the main unit by using the software contained in the Utility Software CD-ROM (Option) w (SD Card Slot) T o inser t an SD card T o remove the SD card, pu[...]

ENGLISH PART NAMES AND FUNCTIONS 67 OSD (On-Screen Display) The menu items displayed/selected on the monitor or the projection screen are referred to as “ OSD (On-Screen Display). ” When the [MENU] button on the front operating panel or on the wireless remote control is pressed, the OSD menu is displayed on the monitor screen. By pressing the [[...]

ENGLISH PART NAMES AND FUNCTIONS 68 * [ ] indicates the factory default settings. Name Function T op hierarchy 2nd hierarchy Posi/Nega Posi (Posi) T o switch the posi/nega of the camera image (Posi/Nega) • Factory setting for Nega Nega (Nega) Gamma (Gamma) : 3 Color/B&W Color (Color) T o switch the Color/Black and White of the camera image (C[...]

ENGLISH PART NAMES AND FUNCTIONS 69 ■ SD Mode (Menu when image stored in an SD card is in display) Name Function T op hierarchy 2nd hierarchy 3rd hierarchy Delete Current NO T o cancel the delete (Delete) (Selected Image) YES T o delete the image in display on the full screen or the image selected from the split screen Locked image can not be del[...]

ENGLISH PART NAMES AND FUNCTIONS 70[...]

ENGLISH PART NAMES AND FUNCTIONS 71 Wireless Remote Control q w e r y u t y i o !0 !1 !2 !3 !4 @5 @4 @3 @2 @1 @0 !9 !8 !7 !6 !5 Name Function q PRESET (State Save) T o save the current setting state of the unit Use this function together with the memor y No. w CALL (State Call) T o call the setting state Use this function together with the memor y [...]

ENGLISH PART NAMES AND FUNCTIONS 72 Name Function r (OSD MENU (Menu) To display/cancel the OSD t Operation) ENTER (Input) T o fix the OSD item y T o select the OSD item, select an image from the split (Direction) screen, scroll in digital zoom mode u (Menu Cancel) T o cancel the OSD from the screen when the top OSD item is resumed i POSI/NEGA (Posi[...]

ENGLISH 30 ° 30 ° 30 ° 30 ° 30 ° 30 ° ° PART NAMES AND FUNCTIONS 73 ■ Receivable Range Point the infrared emitting part of the wireless remote control at the infrared sensor of the main unit, and press the button for desired function. The receiving range may be reduced when the main unit is placed in direct sunlight, near an inverter fluor[...]

ENGLISH SETTING UP 74 2 SETTING UP Setting Up (1) Lift the camera column. Simultaneously, the lamp column is also lifted. (2) Turn the camera head. (3) Move the lamp column and the lamp head to an appropriate position as shown in the right figure. q w e[...]

ENGLISH SETTING UP 75 Connecting of Video Cables To protect this product and the peripheral units to be connected to this product, be sure to turn OFF the power supply to all units beforehand. When plugging in/out the connection cable, hold the plug part of the cable. q Connecting to the PC with a USB cable Connect a USB cable to the [USB] terminal[...]

ENGLISH SETTING UP 76 r Connecting to the unit having the analog RGB output terminal Connect the analog RGB cable to the [RGB IN] terminal on the rear panel. • Specifications of the analog RGB input terminal of this product Signal allocation Pin assignment t Connecting to the unit having the composite vide input terminal Connect the video cable w[...]

ENGLISH STORING 77 (1) As shown in the right figure, turn the lamp head and the lamp column and fold them down on the stage. (2 ) Turn the camera head and the camera column and fold them down on the stage. q w e r 3 STORING Storing[...]

78 STORING ENGLISH[...]

ENGLISH OPERATION PROCEDURE 79 4 OPERA TION PROCEDURE Presentation using printed materials When connecting this product and the peripheral units, be sure to turn OFF the power supply to all units beforehand. q Setting the main unit Set the main unit as show in the above figure, connect the main unit to the projector or the PC monitor, and then turn[...]

ENGLISH OPERATION PROCEDURE 80 Before starting the operation, insert an SD card (Option) into the SD card slot on the side panel. To remove the SD card, push it again, and it will come out. Before inserting or removing the SD card or turning OFF the power supply, be sure to select [Camera] [] with the [] button on the front operating panel or wirel[...]

ENGLISH OPERATION PROCEDURE 81 ■ Saving the Image (1) Press the [] button on the front operating panel or wireless remote control to switch the image mode to the Camera mode. (2) Press the [] button on the front operating panel or wireless remote control. (3) When the [] mark lights up on the screen, the image saving starts. When this mark goes o[...]

ENGLISH OPERATION PROCEDURE 82 ■ Deleting the Image (1) Press the [] button on the front operating panel or wireless remote control or press the [] button on the wireless remote control to have the images in the SD card displayed on the full-screen or split screen. ( 2) Select the image to be deleted with the direction buttons [] on the front ope[...]

ENGLISH OPERATION PROCEDURE 83 Presentation using “ Utility Software ” (Option) with the USB-connected PC Set [USB Mode] to [Application] on the OSD. "Utility Software" (Option) contains the PC link software “ Image Mate for Presentation ” , “ Image Mate for Movie Creation ” and the TWAIN driver "ELMO TWAIN DS" for t[...]

ENGLISH OPERATION PROCEDURE 84 Set [USB Mode] to [Mass Storage] on the OSD. When this product is USB-connected to the PC, image data in the SD card can be transferred into the PC. The Operating System (OS) of the connected PC should be Microsoft Windows 2000(SP4 or newer)/XP(SP2 or newer). (1) Turn ON the power supply to this product and to the PC.[...]

ENGLISH OPERATION PROCEDURE 85 When the camera head is set horizontally, wall, distant view, etc. can be shot. When the object is in the distant view, open the close-up lens holder forward. To shoot horizontally, turn the image by 180° by pressing the [IMAGE ROTATION] button or setting the OSD accordingly. Shooting enabled range when the close-up [...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 86 5 V ARIOUS FUNCTIONS AND OPERA TIONS Lighting When the [] button on the front operating panel or wireless remote control is pressed, the fluorescent lamp lights up in 1 – 3 seconds. Each time the [] button is pressed, the fluorescent lamp turns ON/OFF alternately. When the lighting lamp is used when the[...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 87 Zoom When the zoom dial [ , ] on the front operating panel is turned or the zoom button [ , ] on the wireless remote control is pressed, the document display range can be adjusted. According to the zoom dial turning angle, the zooming speed varies in 3 steps (3-step speed change). ● Zoom magnification i[...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 88 White Balance ■ [Auto/One-Push] (Auto Track / Auto Adjust and Fix) The Auto (auto track) mode for adjusting the white coloring automatically according to the document or lighting condition and the One-Push (auto adjust and fix) mode for maintaining the automatically adjusted state can be switched altern[...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 89 Image Selection Each time the [] button on the front operating panel or wireless remote control is pressed, the image is switched in order of the camera image to the image inputted in the analog RGB input terminal [RGB IN], then to the image in the SD card, and then to the camera image again. When the PC [...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 90[...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 91 Focus The focus on the object is adjusted. ■ Auto Focus When the [AF] button on the front operating panel or wireless remote control is pressed, the camera is focused automatically. This product is of one-shot auto focus type. That is, once the camera is focused, the auto focus operation is released, an[...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 92 ■ Manual Focus When the focus button [FOCUS · NEAR] or [FOCUS · FAR] on the wireless remote control is pressed, the height on which the camera is focused changes. This function is used for focusing the camera on any portion of a 3D object or the like. Limit of focus adjustment: • With close-up lens [...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 93 Iris When the [IRIS · OPEN] button or [IRIS · CLOSE] button on the front operating panel or wireless remote control is pressed, the lens iris is adjusted for image brightness. This adjustment can be made in either of the following 2 modes, which are set in [Iris] on the OSD: ■ Auto Brightness Adjustme[...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 94 State Presetting The setting position of this product can be saved/called. Up to 6 positions can be saved. The presets that can be saved are as follows: • Current zoom field angle • Iris state • White Balance state • Edge Effect settings • Gamma value settings • Lighting ON/OFF • Color/B&[...]

ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 95 To mount the LCD monitor (LM-5011N) on option, the LCD monitor bracket (MS-30) is required . As show in the right figure, connect the composite video output terminal [VIDEO OUT] of this product to the LCD monitor (LM-5011N) with the video cable with RCA pin plug (supplied as an accessory on standard or av[...]

ENGLISH ABOUT RS-232C 96 Setting Up q Connect this product to a PC with an RS-232C cable. When using an RS-232C cable available on the market, make sure that pin connections are the same as below. To protect this product and the PC, be sure to turn OFF the power supply to all units before starting the connection work. w Start the PC, and set the co[...]

ENGLISH ABOUT RS-232C 97 Data Format Specification This command is executed in the form of 1-command/1-packet. The next command is not accepted until the previous processing is completed. • The communication command always starts with STX (Start of Text), and ends with ETX (End of Text). • If the communication format of command name is wrong, N[...]

ENGLISH ABOUT RS-232C 98 UART Communication Format Commands, parameters and data are all transmitted in ASCII code. Function Command Parameter Data Contents Auto Focus AF 0 ■■ T o perfor m the one-shot auto focus Focus adjustment FO + (Near) ■■ T o adjust the focus – (Far) 0 (Stop) Zoom adjustment ZO + (T ele) ■■ T o adjust the zoom ?[...]

ENGLISH ABOUT RS-232C 99 For " ■■ " in the data column, transmit the SPACE [20H] twice. Function Command Parameter Data Contents File delete DE 0 (Current) ■■ T o delete an image file in the SD card 1 (All) File lock SL 0 (Current) ■■ T o lock an image file in the SD card 1 (All) File unlock SU 0 (Current) ■■ T o unlock th[...]

ENGLISH ABOUT RS-232C 100 About Connection If the RS-232C cable is not connected correctly between this product and the PC, no acknowledgement is transmitted. Connect the RS-232C cable correctly, and fix it firmly with the connector set screws before starting the operation.[...]

ENGLISH TROUBLESHOOTING 101 7 TROUBLESHOOTING Check the following items. If any abnormality is found, consult the seller from whom you have purchased this product or our branch/office near your location. Symptoms and Confirmation Replacement of Lighting Lamp (Fluorescent Lamp) The lighting lamps (fluorescent lamps) are expendables. When any of them[...]

ENGLISH SPECIFICATIONS 102 ■ General 8 SPECIFICA TIONS Item Specifications Power source 12VDC (AC adapter: 100 ~ 240VAC) Power consumption 30W (AC adapter included) Outside dimensions 377 × 482 × 180mm (14.8 × 19.0 × 7.1 in) (When folded) 377 × 482 × 582mm (14.8 × 19.0 × 22.9in) (When set up) Weight Approx. 4.7kg (10.4 lbs) (Main body onl[...]

ENGLISH SPECIFICATIONS 103 ■ Main Camera ■ Lighting Item Specifications Lens f = 4.7 ~ 56.4mm (12-time zoom), F2.8 Shooting speed 20 frames/sec Shooting area 405 × 303mm (15.9 × 11.9 in) max. 36.5 × 28mm (1.2 × 0.9 in) min. Limit of focus With close-up lens: adjustment TELE side : 305 ~ 405mm (12.0 ~ 15.9 in) from close-up lens WIDE side : [...]

ENGLISH SPECIFICATIONS 104 ■ Supplied Accessories ■ Options • 5 ˝ TFT LCD color monitor kit (LM-5011N) • LCD monitor bracket (MS-30) • Utility Software CD-ROM For the RCA pin, use a pin plug compliant with EIAJ RC-6703. The above specifications are subject to change without notice. Trademark Acknowledgements VESA and SVGA are registered [...]

105 ENGLISH[...]