Elo TouchSystems 1919LM manual

T ouchmonitor User Guide 1519LM 15.6” L CD Desktop T ouchmonitor 1919LM 18.5” L CD Desktop T ouchmonitor[...]

Elo T ouchSystems 15.6” and 18.5” LCD T ouchmonitor User Guide Revision A SW60146 3 Elo T ouchSystems 1-800-ELOTOUCH www .elotouch.com[...]

Copyright © 2010 T yco Electronics. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, inc lud ing , but not l imi ted to, e lec tro nic , ma gne tic , opt ica l, ch emi cal , man ual , or ot h[...]

W arnings and Cautions W arning • Danger - Explosion hazard. Do not use in the presence of ammable anesthetics, and other ammable materials. • T o prevent re or shock hazards, do not immerse the unit in water or expose it to rain or moisture. • Do not use the unit with an extension cord receptacle or other outlets unless the prongs o[...]

Caution • Power cord is used as a disconnection device. T o de-energize equipment, disconnect the power cord. • This unit must follow the national requirement and local state laws to dispose unit. • Before connecting the cables to your Elo touchmonitor , make sure all components are powered OFF . O n l y a p p r o v e d c o m p o n e n t s c [...]

Med ic al a nd He al thc ar e A pp li ca tio n D is cl aim er : I f t he P ur ch as er i nt en ds t o c om mer ci al iz e, m ar ke t o r use any product for med ical or healthcare applicati ons, it is the sole responsibil ity of the Purc haser to ensure that the p rodu ct is ad equ ate a nd ap prop riat e for t he Pu rcha ser ’ s in tend ed us e [...]

 Classication W ith respect to electrical shock, re in accordance with UL60601-1 and CAN/CSA C22.2 No. 60601-1 This monitor is a Class I (GROUNDED) DEVICE. These displays are classied NO APPLIED P AR TS EQUIPMENT . Protection against harmful ingress of water: INGRESS PROTECTION (IPX0) This monitor shall be classied as ORDINAR Y EQUIP[...]

viii  EuropeanStandardsandClassications Standards: EN 60601-1-2: 2007 The EMC limits and test methods are referred to the following standards: Emission: Immunity CISPR 1 1: 2009+A1:2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2006+A1:2007+A2:2010 (Group 1, Class B) IEC 61000-4-4: 2004 + A1:2010 IEC 61000-4-5: 2005 EN5501 1: 1998+A1: 1999+[...]

Guidance and manufactur er ’ s declaration-electr omagnetic emissions The ET1519/1919LM is intended for use in the electromagnetic environment specied below . The customer or the user of the ET1519/1919LM should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment-guidelines RF emissions Group 1 [...]

Guidance and manufactur er ’ s declaration-electr omagnetic immunity- for all EQUIPMENT AND SYSTEMS Guidance and manufactur er ’ s declaration-electr omagnetic immunity The ET1519/1919LM is intended for use in the electromagnetic environment specied below . The customer or the user of the ET1519/1919LM should assure that it is used in such a[...]

Guidance and manufactur er ’ s declaration-electr omagnetic immunity The ET1519/1919LM is intended for use in the electromagnetic environment specied below . The user of the ET1519/1919LM should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance Electromagnetic envir onment-guidelines level Portable an[...]

Recommended separation distances between portable and mobil e RF communications equipme nt and the ET1519/1919L M The ET1519/1919LM is inte nded for use in an electromag netic environment in which ra diated RF disturbances are controlled. The customer or the user of the ET1519/1919LM can help prevent electromagnetic interfere nce by mai ntaining a [...]

T able of Contents Chapter 1 Introduction 1 Product Description ....................................................................... 1 Precautions ........................................................................................ 1 Chapter 2 Installation and Setup 2 Unpacking Y our T ouchmonitor ............................................[...]

CHAPTER 1 I NTRODUCTION Product Description Y our new 1519/1919LM touchmonitor combines the reliable performance of touch technology with the latest advances in LCD display design. This combination of features creates a natural ow of information between a user and your touchmonitor . This LCD monitor incorporates a 15.6” or 18.5” color activ[...]

2-2 Elo QuickStar t CD Software CHAPTER 2 I NST ALLA TION AND S ETUP This chapter discusses how to install the 1519/1919LM LCD touchmonitor and the driver software. Unpacking Y our T ouchmonitor Check that the following items are present and in good condition: LCD monitor VGA cable USB cable Audio cable CD and Quick Install Guide Power Brick Serial[...]

Power cable for North America models USA/UL Power cable Power cable for European models Europe/VDE power cable UK power cable Power cable for Japan models Japanese/PSE power cable Adapter/T erminal 2-3[...]

2-4 Assembling the stand plate Pushing the stand plate toward the stand untill it is tight, then fasten the stand plate using captive screw .[...]

Interface Connection  Note: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 1. Connect DC cable of the power brick to the monitor and the other end through AC power cable to the AC outlet. 2. Connect one end of either the touchscreen serial (RS232) cable or the touch screen USB[...]

2-6 Product Overview Main Unit Rear View Kensington TM Lock The Kensington TM lock is a security device that prevents theft. T o nd out more about this security device, go to http://www .kensington.com.[...]

Installing the Driver Software Elo T ouchSystems provides driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM for the following operating systems: • W indows 7 • W indows V ista • W indows XP • Windows 2000 • W indows Me • W indows 98 • W indows 95 • W indows NT 4.0 ?[...]

2-8 Installing the Serial T ouch Driver (not applicable to Acoustic Pulse Recognition monitor) Installing the Serial T ouch Driver for Windows 7, W indows Vista, Windows XP , Windows 2000, ME, 95/98 and NT4.0.  NOTE: For W indows 2000 and NT4.0 you must have administrator access rights to install the driver . Make sure the serial connector (RS23[...]

Installing the Serial T ouch Driver for MS-DOS and Windows 3.1 Y ou must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. T o install Windows 3.x and MS-DOS touch driver from Windows 95/98, follow the directions below: 1 Insert the CD-ROM in your computer ’ [...]

2-10 Installing the USB T ouch Driver Installing the USB T ouch Driver for Windows 7, Windo ws Vista, Windows XP , Window s 2000, ME and Windows 98. 1 Insert the Elo CD-ROM in your computer ’ s CD-ROM drive. If W indows 98 or W indows 2000 starts the Add New Hardware W izard, do the following: 2 Choose Next . Select “Search for the best driver [...]

CHAPTER 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will not likely require adjustment. However , variations in video output and application may require adjustments to the touchmonitor to optimize the quality of the display . For best performance, the input video resolution should be the touchmonitors native resolution, 1366 x [...]

3-12 SELECT MENU SELECT MENU 1 2 3 4 5 Audio Output Bottom Panel Controls Control Function 1 Menu/Exit Display/Exits the OSD menus. 2 1. Enter Luminance of the OSD. 2. Increase value of the adjustment item. 3. Move OSD selection upward. 3 1. Enter Audio of the OSD. 2. Decrease value of the adjustment item. 3. Move OSD selection downward . 4 Select [...]

Controls and Adjustment On Screen Display (OSD) Menu Functions T o Display and Select the OSD Functions: 1. Press the Menu key to activate the OSD menu. 2. Use or to move upward or downward through the menu. Press the “Select” key , execute the function or enter the sub-menu. 3. T o quit the OSD screen at any time during the operation, press th[...]

3-14 On Screen Display(OSD) Control Options Control Description Auto-Adjust Select “Auto-Adjust” to enable this fu nction. The Auto-Adjust will automatically adjust V -Position, H-Position, Clock and Phase. Luminance . Brightness Increases or decreases brightness . Contrast Increases or decreases contrast Image Setting . H-Position Moves the sc[...]

Preset Modes T o reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below . If any of these display modes are detected, the monitor automatically adjusts the picture size and centering. When none of the modes are matched, the user can store their preferred mode[...]

3-16 Power Management System Power Mode Consumption (12VDC input) On <42W Sleep <4W Off <2W It is recommended to switch the monitor off when it is not in use for a long period of time.  NOTE: Complies to VESA Power Management (DPM) standards. T o activate the monitor , press any key on the keyboard or move the mouse or touch the t ouchs[...]

CHAPTER 4 T ROUBLESHOOTING If yo u a re exp erie ncin g t roub le wit h y our to uchm onit or , ref er to th e f ollo wing t able . I f t he problem persists, please contact your local dealer or the Elo service center . Solutions to Common Problems Problem Suggestion(s) The monitor does not respond 1. Check that the monitor ’ s Power Switch is on[...]

A-18 APPENDIX A N A TIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the LCD touchmonitor , the native resolution is 1366 x 768 for the 15.6 inch and 18.5 inch size. In almost all cases, screen images look best when viewed at their native resolution. The resolution s[...]

As an example, a SVGA resolution LCD panel has 800 pixels horizontally by 600 pixels vertically . Input video is also represented by the same terms. XGA input video has a format of 1024 pixels horizontally by 768 pixels vertically . When the input pixels contained in the video input format match the native resolution of the panel, there is a one to[...]

B-20 APPENDIX B T OUCHMONIT OR S AFETY This manual cont ains in formation that is impo rtant f or the p roper setup and mainte nance o f your touchmonitor . Before setting up and powering on your new touchmonitor , read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation). 1 T o reduce the risk of electric shock, foll[...]

Care and Handling of Y our T ouchmonitor The following tips will help keep your touchmonitor functioning at the optimal level. • T o avoid risk of electric shock, do not disassemble the brick power supply or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from the power outlet before cleaning. • Do no[...]

C-22 APPENDIX C T ECHNICAL S PECIFICA TIONS[...]

C-23 T ouchmonitorSpecications Model 1919LM LCD Display 18.5” TFT Active Matrix Panel Display Size 409.8 (H) x 230.4 (V) mm Pixel Pitch 0.3 (H) x 0.3 (V) mm Native Resolution 1366 x 768 Display Mode 720 x 350 (70Hz) - (may not display at full screen) 720 x 400 (70Hz) 640 x 480 (60 / 72 / 75Hz) 800 x 600 (56 / 60 / 72 / 75Hz) 832 x 624 (75Hz[...]

C-24 T ouchmonitorSpecications Model 1519LM LCD Display 15.6” TFT Active Matrix Panel Display Size 344.232 (H) x 193.536 (V) mm Pixel Pitch 0.252 (H) x 0.252 (V) mm Native Resolution 1366 x 768 Display Mode 720 x 350 (70Hz) - (may not display at full screen) 720 x 400 (70Hz) 640 x 480 (60 / 72 / 75Hz) 800 x 600 (56 / 60 / 72 / 75Hz) 832 x 6[...]

15” LCD T ouchmonitor (1519LM) Dimensions C-25[...]

19” LCD T ouchmonitor (1919LM) Dimensions 26[...]

R EGULA T OR Y I NFORMA TION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency , and current requirements indicated on the manufacturer’ s label. Connection to a different power source than those specied herein will likely result in improper operation, damage to the equipment or pose a re haz[...]

28 D) General Information to all Users: This equipment generates, uses and can radiate radio frequency energy . If not installed and used according to this manual the equipment may cause interference with radio and television communications. There is, however , no guarantee that interference will not occur in any particular installation due to site[...]

29 III. AgencyCertications The following certications have been issued for this monitor: • Canada CUL • Canada IC • Europe CE • Japan VCCI • FCC • United States UL[...]

W ARRANTY Except as otherwise stated h erein or in an order acknowledgment deliv ered to Buye r , Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product is 3 (three) years. Seller makes no warranty regarding the model life of components. Selle[...]

Check out Elo ’ s W ebsite! w ww .elotouch.com Get the latest... • Pr oduc t information • Specications • News on upcoming ev ents • Pr ess release • Soft ware driv ers • T ouchmonitor Newsletter Getting in T ouch with Elo T o nd out more about Elo ’ s extensive range of touch solutions, visit our Website at www .elotouch.com [...]

© 2010 T yco Electronics. Printed in USA Check out Elo ’ s W ebsite! w ww .elotouch.com Get the latest... • Pr oduc t information • Specications • News on upcoming ev ents • Pr ess release • Soft ware driv ers • T ouchmonitor Newsletter Getting in T ouch with Elo T o nd out more about Elo ’ s extensive range of touch solution[...]