English dropdown-ico

Emerson 3411 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Emerson 3411, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Emerson 3411 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Emerson 3411. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Emerson 3411 should contain:
- informations concerning technical data of Emerson 3411
- name of the manufacturer and a year of construction of the Emerson 3411 item
- rules of operation, control and maintenance of the Emerson 3411 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Emerson 3411 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Emerson 3411, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Emerson service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Emerson 3411.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Emerson 3411 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Installati on Manual Part Number 3-9000-759R evision D June 2014 Dani el TM 3410 Series Gas Ultrasonic Flo w Meters 3414 Gas Ultrasonic Flo w Met er 3411 and 3412 Gas Ultrasonic Flo w Meters[...]

  • Page 2

    [...]

  • Page 3

    Da n i el c us to m er s er v i ce E-m a i l • Custo mer S er vi ce: tech .ser vice @emer son pro cess. com • Cust omer Support: daniel.cst.support@emerson.c om • Asia -Pacific: danielap .support@ eme rson.com • Eur ope: Dan iel EMA . C ST @Em er son Pr ocess .com Location Te l e p h o n e n u m b e r Fa x n u m b e r Nor th America/Latin A[...]

  • Page 4

    Sign al w ords and symbols Pay speci al atten tion to the following sign al words, sa fe t y alert symbols and stateme nts : Impor tant Impor tant is a stat eme nt the u ser needs to know and conside r . Tip Tip provides information or suggestions fo r improved e fficie ncy or best results. Note Note is a “ gene ral by-the-way” conten t not ess[...]

  • Page 5

    Impor t ant sa fe t y instruc tions Daniel Me asure ment and Control, Inc. (Danie l) designs, manu factures and tests products to func tion within specific conditions. Becaus e these produc ts are sophisticated t echnical instruments, it is impor tant that the owner and ope ration personnel strictly adhere both to the inf ormation printed on the pr[...]

  • Page 6

    Product O peration P ersonnel: • T o prev en t pe rsonal inj ur y , personnel m ust f ollo w all instructions of this m anu al prior to and during operation of the pro duct . • Follow all warnings, cautions, and notices m arked on, and supplied with, this produc t. • V erif y t ha t this is the correc t instr uction manual for y our Daniel pr[...]

  • Page 7

    No tic e THE CONTENT S OF THIS PUBLICA TION ARE PRE SENTED FOR INF ORMA TIONAL PURPOSES ONL Y , AND WHILE EVERY EFF ORT HAS BEEN MADE T O EN SURE THEIR ACCURA CY , THEY ARE NO T T O BE C ON STR UED AS W ARRANTIES OR GU ARANTEES, EXPRESSED OR IM PLIED, RE GARDING THE PR ODUC TS OR SERVICES DESCRIBED HEREIN OR THEIR U SE OR APPLICABILIT Y . ALL SALES[...]

  • Page 8

    W arrant y and Limit ations 1. LIMITED W ARRANT Y : Sub ject to the limitatio ns con tained in Section 2 he re in, D aniel Mea sure men t & Control, Inc. (“Danie l”) warran ts tha t the lice nsed firmware embodied in the Goods will execute the programming inst ruc tions provided by Danie l, and that the Goods manufac tured by Daniel will be[...]

  • Page 9

    Daniel Series 341 0 Gas Ultrasonic Meter Insta llation Manual PrefaceTable of Contents 3-9000-759 Rev D June 2014 Section 1: Introduction i Co nte nts Preface Danie l cu stomer ser vic e Signal w ords and symbols Impor tant saf ety instruc tions Notic e W arranty and Limit ations Section 1: Introduction 1.1 T ypical applicati ons ..................[...]

  • Page 10

    ii Section 3: Electrical installation PrefaceTable of Contents Daniel Series 341 0 Gas Ultrason ic Mete r Installation Manual June 2014 3-9000-759 Rev D Section 3: Electrical installation 3.1 Cable length TTL mode .................................................................................. 4 3 3.2 Cable length Ope n Collector mode ...........[...]

  • Page 11

    Daniel Series 341 0 Gas Ultrasonic Meter Insta llation Manual PrefaceTable of Contents 3-9000-759 Rev D June 2014 Section 4: Configuration iii Appendix A: Engineering drawings A.1 3410 Series engineering drawin gs . ........... .............. .............. ............ .............. ........... ....... 99 Appendix B: Open source licenses B.1 GNU [...]

  • Page 12

    iv Section 4: Configuration PrefaceTable of Contents Daniel Series 341 0 Gas Ultrason ic Mete r Installation Manual June 2014 3-9000-759 Rev D[...]

  • Page 13

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Ma nual List of Tables 3-9000-759 Rev D June 2014 List of Tables v List o f T ables T able 1-1 Daniel 3410 Series Gas Ultrasonic Meter acronyms, abbreviations and definitions ............ 3 T able 1-3 Performance specification s ...................... ............ .............. ............[...]

  • Page 14

    vi List o f Tables List of Tables Daniel 3410 Series Ultras onic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D[...]

  • Page 15

    Daniel 3410 Series Gas Ultrasonic Mete r Installation Manual List of Figures 3-9000-759 Rev D June 2014 List of Figures vii List of Figure s Figure 1-1 Daniel Meter Link download and registration .... ............ .............. .............. ........... ......... 6 Figure 1-2 Daniel 3414 Gas Ultrasonic Flow Meter desi gn ....... .............. ..[...]

  • Page 16

    List of Figures Daniel 3410 Series Gas Ultrasonic Meter Installat ion Manual June 2014 3-9000-759 Rev D viii List of Figures Figure 3-1 2 Base Enclosure wire seal installation 68 Figure 3-1 3 Base Enclosure security seals 69 Figure 3-1 4 Transducer assembly security seal70 Figure 4-1 AMS Devi ce Description search81 Figure 4-2 AMS file download com[...]

  • Page 17

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Typical applications 1 11 Sec tion 1: Introduc tion Daniel 3410 Series Ultra sonic Gas Flow Mete rs hav e various c onfigurations that meet a broad ran ge of cust omer re qui rement s. E ach meter comes fu lly assem bl ed f rom Dan i[...]

  • Page 18

    2 Features and benefits Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.2 F eatures and benefits • Prov en long te rm stabilit y • Field pro ve n re liability • No line obstruction • No pressure lo ss • No moving parts • Low ma intenan ce • Bi-direc tional me asur[...]

  • Page 19

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Acronyms, abbreviati ons and definitions 3 1.3 A cronym s, abbre viations and de finitions T able 1-1 Daniel 3410 Series Gas Ultrasonic Meter acron yms, abbreviations and definiti ons Acron ym or abbreviation Defini tion °d e g r e [...]

  • Page 20

    4 Acronyms, abbreviat ions and definitions Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D IS Int rin sic all y Safe K Ke lvin (tempe rature unit) kHz kiloher tz (10 3 c ycles pe r second, frequency unit) LAN Local Are a Network LED Light-e mitting Diode m me ter ( len gth un it [...]

  • Page 21

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Acronyms, abbreviati ons and definitions 5 s second (time unit, metric) SDRA M Synch ronous Dyna mic Rand om Access Memor y sec second (time unit, U.S. Cust omary) T CP/IP T ransmission Control Prot ocol/Int ernet Prot ocol time_t se[...]

  • Page 22

    6 Daniel MeterLink software Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.4 Daniel MeterLink sof t wa re Daniel Met erLink TM soft ware has robust f e atures for setting communications paramete rs, configuring your me ter , collec ting logs and reports and m onitoring the met[...]

  • Page 23

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Daniel 3410 Series meter design 7 Procedure 1. F rom the right p anel under Qui ck Links, c lick the MeterLink R egistration and Download link. 2. Click the Or de r No w button t o comple te the Online registra tion f orm. 3. Click N[...]

  • Page 24

    8 Daniel 3410 Series meter design Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Computer simulations o f various veloc it y profiles demonstrate that multiple mea suremen t paths provide an optimum solution for mea suring asymmetric flow. Daniel 3414 Gas Ult raso ni c Flow mete[...]

  • Page 25

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Daniel 3410 Series meter design 9 Danie l 3412 Gas Ultrasonic Flow met ers utilize two -path in -line (four transducers) mea suremen t paths and are de signed to mea sure the diffe re nce in signal tr ansit time wi th and against the[...]

  • Page 26

    10 Daniel 3410 Series meter design Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Danie l 3411 Gas Ultrasonic Flow meters are single-path (t wo tran sduce r) Gas Ultrasonic Flow Mete r and is ref erred to a s a bounce-path (a s the signal is bounced off the mete r body) or a ce [...]

  • Page 27

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Daniel 3410 Series meter design 11 All Daniel ultrasonic flow meter’s U.L. saf ety listi ng is accomplished through the combination of an explosi on-proof transmitt er e lectronics enclo sure th at hou ses th e CPU module , Pow er [...]

  • Page 28

    12 Meter specifications Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.6 M eter specifications Consult your Daniel Sales and Se r vice re presen tative to ensure yo u purchase the correct compone nts and se als f or yo ur application. CON TE N TS MA Y B E U ND ER PR ES SU RE W[...]

  • Page 29

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Meter specifications 13 Specifica tions for D aniel 3410 Se ries Ga s Ultrasonic Flo w Mete rs are below: T able 1-2 Meter specifications Daniel 3411, 3412 and 3414 meter specifications Meter type Number of pa ths • 3411 Daniel sin[...]

  • Page 30

    14 Meter specifications Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Met er Pe rforma nce Flange t ypes ANSI c lasse s - 300, 600, 900 and 1500 (per ANSI B16.5) Specific Gravity 0.35 to 1.50 Accura cy Limits Model 34 14 accuracy limits (A GA 9 c ompli ant) are : • ± 1% with[...]

  • Page 31

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Meter specifications 15 Electr onic specifications (Continu ed) T ransducer , mounts and holders Not e: The proc ess tempe rature mu st not exc eed the operating te mperature range o f the transduce rs. Not e: T -11 and T -21 tr ansd[...]

  • Page 32

    16 Meter specifications Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Communications specifications Connectivit y protocols One serial RS -232/RS -485 po r t (115 kbps baud rate) (Modbus RTU/ASCII) • (1) Serial Port A (RS -232/R S -485 Full Duplex/RS -485 Half Duplex) One Eth[...]

  • Page 33

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Meter specifications 17 Digital, analo g, and frequency outputs Fr eq u en c y / Di g it al Output(s) The mete r ha s user -configurable selections for e ither a frequency output or digital status (FODO) (Also see Sectio n 3.6.1 ). ([...]

  • Page 34

    18 Pre-installation considerations Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.7 Pre -installation considerations • Pipeline equipme nt c ode compli ance , AN SI, ASME, etc. • Proper Inlet/outlet mete r tube piping for re ason able stable flow to the settling chamber (f[...]

  • Page 35

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Safety 19 Danie l 3410 Serie s Liquid Ultra sonic Mete rs are INMETRO ce rtified. Ref e r to the 3410 Se ries Liquid Ultrasonic Flo w Mete r T ag, IN METRO Certification drawing DMC - 006224. Certificate number: NCC 11.0163 X Marking[...]

  • Page 36

    20 Daniel 3410 Series Certifications and Approvals Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.9 Daniel 3410 Series Ce r tifications and Approv als Daniel 3410 Se ries Gas Ultra sonic Flow Meters hav e electrical, metrology , intrinsic saf ety and Pressure Equipmen t Direct[...]

  • Page 37

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 FCC compliance 21 1.10 FCC compliance This equipme nt h as bee n te sted and f ound to c omply with the limits f or a Cl as s A digital devic e , pu r s u an t to P ar t 15 of t h e F CC Ru l es . T h es e li m i t s a r e d es i gn [...]

  • Page 38

    22 References Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.11 R eferenc es [1] Goul d Modb us P rotoc ol R efere nc e Guide , Rev . B, PI -MBUS-300 [2] Measureme nt of F uel Ga s By T urbine Meters, American Gas A ssociation, T ransmissi on Mea sureme nt C ommittee R eport N[...]

  • Page 39

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter piping, lifting and mounting 23 Sec tion 2: Mech anical inst alla tion 2.1 Meter piping, lif ting and mounting Re fe r to the following section s for piping rec ommendations, lif ting with hoist ri ngs and slings, mou[...]

  • Page 40

    24 Meter piping, lifting and mounting Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D Consult your Daniel Sales and Se r vice re presen tative to ensure yo u purchase the correct compone nts and se als f or yo ur application. CRUSHING HAZ ARD Do not remove flange stab[...]

  • Page 41

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter components 25 2.2 M eter comp onents Danie l 3410 Serie s Ga s Ultrasonic Flo w Mete rs are a ssembled , con figured and tested a t the factor y . The meter c ompone nts inc lude the transmitt er e lectronics enclo su[...]

  • Page 42

    26 Meter components Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D The 3414 four pa th ultrasonic me te r compone nts are sho wn below . Figure 2-1 Daniel 3414 Flow Mete r assembly E XPL OSION OR FIRE HAZARD Conduit runs m ust have a sealing fitting within 18 in ches[...]

  • Page 43

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter components 27 The 3412 dual p ath ultra sonic mete r c ompone nts are s hown be low . Figure 2-2 Daniel 3412 Flow Mete r assembly A. B. C. A. Explosion-proof transmitte r enclo sure (CPU Module , Po wer Supply , I.S. [...]

  • Page 44

    28 Meter components Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D The 3411 single path ultra sonic mete r compone nts ar e shown belo w . Figure 2-3 Daniel 3411 Flow Meter assembly Figure 2-4 T ransmitter ele ctronics en closure with optional local display and glass[...]

  • Page 45

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Piping recommendations 29 2.3 Piping recommendations Sunshields, pro vided by the cu stome r , may be required to prev e nt exc eeding the proce ss fluid tempe rature when the mete r is mounted in a location with ex tremely[...]

  • Page 46

    30 Piping recommendations Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D Flow conditioning is recommended for best me asureme nt results • Honed or un-honed mete r tube(s) • Flow direc tion (unidirec tional or bidirec tional) • Correc t meter siz e selection - [...]

  • Page 47

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Piping recommendations 31 Figure 2-6 Piping recommendations Un i-direc tional with fl ow c onditio ner Figure 2-7 Piping recommendations Bi-d irectional flow with flow c onditioner All pipe lengths are minimum: • D = Nomi[...]

  • Page 48

    32 Piping recommendations Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D • Daniel 3410 Series Ultrasonic Ga s Flow Mete rs should be mounted in hor iz ontal piping with the ch ord pa ths horiz on tal • Normally , the mete r body is installe d so that the electron[...]

  • Page 49

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter safety for hoist rings and lifting slings 33 2.4 Meter safe t y for hoist rings and lif ting slings A Danie l G as Ultra sonic Fl ow Met er can be sa fe ly lifted and mane uve red int o and out of a me te r run for in[...]

  • Page 50

    34 Use of appropriate safety engineered swivel hoist rings in meter end fla nges Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D When li f ting a D anie l Ultra sonic Mete r b y itse lf , D anie l recomme nds two methods. T hese methods are: • Using a ppropria te ly[...]

  • Page 51

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Use of appropriate safety engineered sw ivel hoist rings in meter end flange s 35 Figure 2-9 Safety approv ed hoist ring and non -compliant ey e bolt Safet y precautions using safet y engineered swivel hoist rin gs Re ad an[...]

  • Page 52

    36 Use of appropriate safety engineered swivel hoist rings in meter end fla nges Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 6. After installation of the hoist rings, always check tha t the ring rotat es and pivo ts freely in all direc tions. 7. NEVER atte mp t to[...]

  • Page 53

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Use of appropriate safety engineered sw ivel hoist rings in meter end flange s 37 9. NEVER allow the slings to contact the electronics enclosure . Damage to the enc losure may occur . Use a spreade r bar with the slings to [...]

  • Page 54

    38 Use of appropriate safety engineered swivel hoist rings in meter end fla nges Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 12. NE VER lif t more than the ult ras onic meter asse mbly including elect ronics and transducers with the hoist rings. The only e x cep t[...]

  • Page 55

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Use of appropriate safety engineered sw ivel hoist rings in meter end flange s 39 What size safety engineer ed swivel hoist ring do y ou need? T o determine the siz e of the hoist ring s required f or your me ter , use the [...]

  • Page 56

    40 Appropriately rated lifti ng slings Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 2.4.2 Appropriat e ly rated lif ting slings The following instruct ions are inte nded to prov ide general guide lines for using proper lifting sling s whe n lifting a Danie l 3410 S[...]

  • Page 57

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Appropriately rated lifting slings 41 4. Visually ins pect the slings prior to use f or an y signs of abra sion or othe r dama ge . Re fe r to the sling manufacturer's procedur es for prop e r inspect ion of the par ti[...]

  • Page 58

    42 Mounting requirements in heated or cooled pipelines Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 2.5 Mounting requirements in heated or c ooled pipelines The ambien t opera ting te mperat ure of the D aniel 3410 Series G as Ultra sonic Flo w Mete r electronics ([...]

  • Page 59

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Cable length TTL mode 43 Sec tion 3: Elec trical installa tion 3.1 Cable length T TL mode The maximum cable length is 2000 f eet when the Digital Output “T TL” mode is selec ted. 3.2 Cable length Open Collec tor mode F[...]

  • Page 60

    44 GROUNDING METER ELECTRONICS HOUSING Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.3 Grounding meter electronics housin g The mete r e lectronics should be inte rna lly grounded f or intrinsical ly saf e opera tions. C onnect a wire to the chas sis ground lug in [...]

  • Page 61

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Conduit seals 45 Figure 3-2 External gro und lug 3.4 Conduit seals Conduit seals are required for mete r installations in hazar dous en vironments. Adhere t o safe t y instruc tions to protec t personnel and equipment. A. [...]

  • Page 62

    46 STARTUP FOR SYSTEMS USING EXPLOSION-PROOF CON DUIT Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.4.1 S tar tup for syste ms u sing explosion-proof c onduit 1. Assemble conduit to the T ransmitter Elec tronics Enclosure. A conduit seal fitting is required within [...]

  • Page 63

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Startup for systems using explosion-proof conduit 47 5. Complete the fie ld c onnect ion wiring an d apply electrical power to the system. Figure 3-3 Electronics fiel d wiring - upper terminal bl ock, switches, groun d lug[...]

  • Page 64

    48 STARTUP FOR SYSTEMS USING EXPLOSION-PROOF CON DUIT Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Figure 3-4 T ransmitter elec tronics field wiring l ow er terminal bl ock F. G. H. A. U pper terminal block B. FODO Group 1 connections FOD O 1 GND1 DI 1 E. Ethernet E[...]

  • Page 65

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Startup for systems using explosion-proof conduit 49 6. Set or c onfigure the met er ope rating parame ters u sing Danie l Met erLink . For a dditional installation inf ormat ion ref er t o the system wiring di agram ( see[...]

  • Page 66

    50 STARTUP FOR SYSTEMS THAT USE FLAME-PROOF CABLE Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.4.2 S tar tup for syst e ms tha t u se fl ame-proo f cable 1. Check to m ak e ce rt ain th at all fie ld wiring po we r is turned OFF . 2. R emov e the end cap ne arest [...]

  • Page 67

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Wiring and I/O 51 3.5 Wiring and I/O Daniel Met erLink u ses the T CP/IP protoc ol to communicate with the Danie l 3410 Series Ultrasonic G as Flo w Mete r electronics instead o f Modbus ASCII or RTU . The T CP/IP prot oc [...]

  • Page 68

    52 CPU MODULE LABELING AND LED INDICATORS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.5.1 CPU Module labe ling and LED indicat ors The mete r’s metrology mode and the status of the da ta transfer from the Acquisition Module to the CPU Modul e are indicated via [...]

  • Page 69

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 CPU Module labeling and LED indicators 53 T able 3-2 CPU Module labeling and LED functions CPU Module label or LED F unction Swit ch position indicator or LED WRITE PRO T . • W rite-protect mod e - with switch in the ON [...]

  • Page 70

    54 CPU MODULE LABELING AND LED INDICATORS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Ethernet communications The Ethernet port IP address, subnet ma sk, and ga tewa y addre ss are so f t ware-c onfigurab le. In addition, a meter can be con figured to ac t as a DHC[...]

  • Page 71

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 CPU Module labeling and LED indicators 55 Modbus T CP If the meter firmware supports Modbus T CP slav e f unctionality , the f ollowin g con trols will be availab le. Modbu s T CP unit ide nti fie r: Ente r the Modbu s T C[...]

  • Page 72

    56 CPU MODULE LABELING AND LED INDICATORS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Serial connections Use a s eri al cable , D aniel P/N 3-2500-401, to c o nnec t to a PC running Danie l Mete rLink. The cable is designed for RS -2 32 communications which is the [...]

  • Page 73

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 I/O connections 57 Figure 3-6 PC to mete r serial connection wiring 3.6 I/O connec tions The Daniel 3410 Series Ga s Ultrasonic Flow Mete r provides the I/O connections on t he CPU Module . 2. Denotes auto -de tec ted pr o[...]

  • Page 74

    58 I/O CONNECTIONS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Figure 3-7 CPU Module I/O connections A. B. C. D. A. Frequency/Digital Output 2 B. F requency/Digital Output 3 C. Analog O utput 2 - 4-20mA output D. Analog Input - HART tem perature and pr essure conne[...]

  • Page 75

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Frequency/Digital outputs 59 3.6.1 F requenc y/Digital outputs The meter h as three use r -c onfigurable selections for configuring eithe r a Freque nc y output or Digital output (FODO). • FODO1 (four po ssible paramete [...]

  • Page 76

    60 FREQUENCY/DIGITAL OUTPUTS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D F requency or Digit al Outputs (FODO 3) source • FO1A, DO1A, FO1B, DO1B, FO2A, DO2A, FO2B, DO2B • FO1A, DO1A, FO1B, DO1B, FO2A, DO2A, FO2B, DO2B • Fr equency output 1A is based on freque[...]

  • Page 77

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Frequency/Digital outputs 61 Maximum frequenc y for the frequency outputs • 1000Hz • 5000Hz T able 3-5 F requenc y/Digital Outputs possible configurations F requenc y/Digital output Sourc e confi gura tion Fr equency /[...]

  • Page 78

    62 ANALOG INPUT SETTINGS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Output for FODO1 and Digital Output1 (Group 1 on the CPU Mo dule) share a co mmon ground and hav e 50V isol ation. FODO2 and F ODO3 (Group 2 on the CPU Module) share a c ommon ground and have 50V [...]

  • Page 79

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Analog output settings 63 3.6.3 Ana log output se tting s The Danie l 3410 Series Ultrasonic Ga s Flow Mete r pro vides two 4-20 mA analog outpu t signals that are soft ware configurable for either sink or source curren t [...]

  • Page 80

    64 CONFIGURATION PROTECT S WITCH SETTINGS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.6.6 Con figura tion pro tect switch se tting s The meter’s c onfiguration parameters and firmwa re can be protected against ch anges vi a the CPU Module WR ITE PRO T . sw itch[...]

  • Page 81

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 External power source connection and fuse 65 3. 6 .7 E x ter na l p ower so u rce co nn e c t io n an d fus e Located inside the T ran smitter Electron ics Enclosure is a connector for a user -provided ex ternal power sour[...]

  • Page 82

    66 SECURITY SEAL INSTALLATION Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.7 Securit y seal installation Securit y seals pro tect the integrit y of the mete r metrology and prev en t tampering with transduc er a sse mblies. The follo wing sections detail ho w to p[...]

  • Page 83

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Seal Transmitter Electronics Enclosure 67 2. Install the security seal wire into and th rough one o f the t wo holes in the end cap . Choos e hole s that minimi ze c oun te rclockwise ro tation o f the e nd cap whe n the s[...]

  • Page 84

    68 BASE ENCLO SURE SECUR ITY SEALS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.7.2 Ba se Enclo sure Securit y Seals Use the following instructions to in stall the securi ty seal wire on the Base Enclosure . Procedure 1. Install security wire seal into and through[...]

  • Page 85

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Base Enclosure Security Seals 69 3. Feed the security wire bene ath the T ransm itter Electron ics Enclosure and through the adjac e nt sock et he ad screw . T wist the wire, remo ving all slack and se al. Figure 3-13 Base[...]

  • Page 86

    70 TRANSDUCER ASSEMBLY SECURITY SE ALS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.7.3 T ransduce r a sse mbly securit y seals Use t he fo llowing i nstructions and Figure 3-14 to install the securit y seal wire on the t ransduce r asse mbly . 1. R otate the tran[...]

  • Page 87

    Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Sealing the unit 71 3.7.4 Se aling the unit The unit should be prope rly se aled with a se al ing compound af ter e lec trical connect ions hav e been te sted acc ording t o the cu stome r's Best Practices schedule . [...]

  • Page 88

    72 SEALING THE UNIT Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D[...]

  • Page 89

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Daniel MeterLink Setup 73 Sec tion 4: Configura tion Af ter the mechanical and electrical inst allation is complete and c onnecti vit y is established, use the Daniel Met erL ink Soft ware for G as an d Liqui d Ultra sonic Met ers Q[...]

  • Page 90

    74 Field Setup Wizard Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 4.2 Field Setup Wizard 1. Use the Fie ld Setup Wizar d-Star tup in Daniel Me terLink and se lect the checkboxe s that allow proper c onfigur ation for y our mete r (T empera ture , Pressure , Mete r Correctio[...]

  • Page 91

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Field Setup Wizard 75 8. The Meter Corrections page allows you to configure the flow profile , te mpera ture, pressure and linear expansion correc tions, pipe outside diamete r The Y oung’s Modulus value (ratio of tensile stress t[...]

  • Page 92

    76 Field Setup Wizard Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 11. Con figure the prope rties neces sar y f or the A GA8 calcul ations. This page is only displa yed f or Danie l Gas Ultra sonic met ers if both te mperature and pres sure are set to Live or Fix ed and Ba s[...]

  • Page 93

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Field Setup Wizard 77 Display Items : The Local Displ ay’s labels and descrip tions are shown belo w: T able 4-1 Local display labels, descriptions and valid units Local display labels, descriptions and valid units QFL OW — Unc [...]

  • Page 94

    78 Field Setup Wizard Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D TD YVL — Curre nt d ays f or ward c orrected volume • +SCF – Standa rd Cubic Feet • +SCM – Stan dard Cubic Me ters • +MSCF – Thousand Standa rd Cubic Feet • +MSCM – Thousand Standa rd Cubic [...]

  • Page 95

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Field Setup Wizard 79 Note : W hen co nne c ted to a meter wi th t he local display option, rev e rse flow direc tion is indicated with a minus sign (negative) bef ore the value(s) shown on the local dis pla y . Display units: The M[...]

  • Page 96

    80 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Scroll delay: The Scroll D el ay is the time interval for the selec ted displa y items to be shown on the Local Displ ay . The defa ult scroll de la y se tting is five s econds . [...]

  • Page 97

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 81 Procedure - instal ling AMS Device Description 1. Us e the link abov e to se arch f or the Devic e Des cription (DD) for y our D aniel 3810 Se ries Liquid Ultrasonic Flow Meter . 2[...]

  • Page 98

    82 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 10. Click the Daniel Industries Liquid 3810 Serie s Rev 1 hyperlink. The file download dialog displays. Cl ick the Sav e button t o save the files t o your host syst em. Y ou may [...]

  • Page 99

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 83 17. Click the Configure t ab, and then se lec t Guided Setup , Manual Setup or Alert S etup . Figure 4-3 AMS Device Manager Figure 4-4 AMS Devic e Manager - Ov erview[...]

  • Page 100

    84 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D AMS Devic e Manager - Guided Setup The Guided setup wizard pro vides con figuration paramete r setting s for the me ter . The Guided Setup is a subse t of the M anu al Setup p ara[...]

  • Page 101

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 85 4. Af ter all of the data sh own b elow is entered, cl ick Apply to wri te th e par ameter s to t he mete r . a. Click the Frequency/Digital Outputs tab to con figure F requency/D [...]

  • Page 102

    86 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D d. Click the All Va riables tab to view a graphical display of the Pr imar y , Secondar y , Third and F ourth Vari ables. Figure 4-6 AMS Device Manager - Servic e T ools All V ari[...]

  • Page 103

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 87 AMS Device Manager - Manual Setup Use t he Manual Setup wiz ard to configu re t he m eter’s param eters. See Figure 4-3 and Fig ure 4- 4 and from the AMS Device Manager Con figur[...]

  • Page 104

    88 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 6. Click the Fr eq u e n c y / D i gi t a l Outputs t ab . Follow the configuration instruc tions in the AMS De vice M anage r - Guided Se tup , Step 4a . ). ( Ref r es h N ot e :[...]

  • Page 105

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 89 b . Calibration Ga ting c onfigur ation p aramete r se lections are : – Edge g ated, active high Figure 4-9 Gati ng configur ation p arame ter E dge gated, acti ve high – Edge [...]

  • Page 106

    90 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 12. Click the Alert Setu p tab (from the main Configuration page). Figure 4-13 Configure Flow Analysis Alert 13. Click the Flow Analysis tab to select Configure Reve rse Flow Dete[...]

  • Page 107

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 91 14. Click the Service T ools t ab to ac ce ss th e d ev ic e a le r t s, va r iab le s, t ren ds a nd ma int ena nc e statuses or to edit the configura tion parameters. a. Click th[...]

  • Page 108

    92 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D c. Click the Ser vice T ools|V ariables tab. The V ariables pag e displays tabs for th e device ’s Flow D ata, Path Inform ation, Flow T otals, and All V ariables). Figure 4-16 [...]

  • Page 109

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 93 g. Click Service T ools|Variable s|All V ariables tab to view Prim ar y , Secondar y , Third and Fo ur th V ariable para met er stat us. Figure 4-17 AMS Device Manager - Ser vic e [...]

  • Page 110

    94 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D h. Click the Ser vice T ools|T rends tab t o display the devic e variable s (uncorrected volume flow rat e , pressure and te mpera ture) trends. Figure 4-18 AMS Device Mana ger - [...]

  • Page 111

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using a Field Communicator t o configure the meter 95 4.4 Using a Field Communicator to c onfigure the met er Installation Re quirements • Emerson F ield Communicator soft ware, lice nse , installation guide and user manual avai l[...]

  • Page 112

    96 Using a Field Communicator to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Procedure 1. R emov e electrical power to the meter . If in stalled, remove the endcap security lat ches and seals and the n, remo ve the e ndcap . 2. Re fe r to the Field Commu[...]

  • Page 113

    Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using a Field Communicator t o configure the meter 97 5. Wire Anal og Input 1 (AI1) and An alog Output 1 (AO1) a s shown in Fi gure 4 -20 and Appendix A , drawing DMC -005324. Figure 4-20 Field Communicator wiring diagram f or the 3[...]

  • Page 114

    98 Security seals for the meter (optional) Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 4.5 Securit y seals for the met er (op tional) For the int egrity of the meter me trology and to prev e nt tampe ring with the transmitter electronics and transducer a sse mblies, a ttach[...]

  • Page 115

    Daniel 3410 Series Ultrasonic Gas Flow Me ter Installati on Manual Engineering drawings 3-9000-759 Rev D June 2014 3410 Series engineering drawings 99 APPENDIX APAGE 498 Appe ndix A: Enginee r ing dra wing s A .1 3410 Series engineering dra wings List of Engineering Drawings This appendix contains the following e ngineering drawing(s) for the ultra[...]

  • Page 116

    100 3410 Series engineering drawings Engineering drawings Daniel 3 410 Series Ultrasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D[...]

  • Page 117

    [...]

  • Page 118

    [...]

  • Page 119

    [...]

  • Page 120

    [...]

  • Page 121

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 101 A Appe ndix B: Ope n sourc e lic e nses Sourc e code f or ex ecutable file s or librarie s inclu ded in this product is provided pe r the indicat ed lice nse in the table be lo w . Hype rlinks t o the con trollin g org anizat ion&ap[...]

  • Page 122

    102 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D Follo w the link be low t o the Danie l® Liqui d Ultra sonic Products GPL we bpage f or additi onal open sourc e info rmation and zipped source c ode files. http ://www2.em ersonp roce ss.com /en-US/br an[...]

  • Page 123

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 103 The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1 989, 1991 Free Softwar e Foundation, Inc. 59 Temple Pl ace, Suite 330, Bos ton, MA 02111-1307 USA Everyone is permitt ed to copy an[...]

  • Page 124

    104 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D For example, if you distribute copies of such a program, whether gratis o r f o r a f e e , y o u m u s t g i v e t h e recipients all the rights that you have. You must make sure that they, too, receive o[...]

  • Page 125

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 105 TERMS AND CONDITIONS FO R COPYING, DISTRI BUTION AND MODIFICATIO N 0 . This License applies to any prog ram or other work which contains a notice placed by the copyright holder saying it may be dis tribute[...]

  • Page 126

    106 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D 2 . You may modify your copy or copie s of the Progra m or any portion of it, thus forming a work based on the Program, and copy and distribute such mo difications or work under the terms of Section 1 abov[...]

  • Page 127

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 107 In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storag e or distribution medium does not bring t he other work[...]

  • Page 128

    108 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D If distribution of executab le or object code i s made by offeri ng access to copy from a designated place, then offering equi valent acces s to copy the source code f rom the same pl ace counts as distrib[...]

  • Page 129

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 109 Program by all those who rec eive copies directly or indirectly throu gh you, then the only way you could satisfy both it and this Lice nse would be to refrain entirely from dist ribution of the Program. I[...]

  • Page 130

    110 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D conditions either of tha t version or of any later vers ion published by the Free Soft ware Foundation. If the Program does not specify a version number of this License, you may choose any version ev er pu[...]

  • Page 131

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 111 How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achie ve this is to ma ke it free software whic[...]

  • Page 132

    112 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D The hypothetical commands `show w' and `show c' sh ould show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' [...]

  • Page 133

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU Lesser General Public License 113 B.2 G NU Lesser General Public Lic ense GNU LESSE R GENERAL PUBLIC LIC ENSE V ersion 3, 29 June 2007 Copyright © 2007 Free Softwa re Foundat ion, Inc. <http://fsf .org/> Everyone is permitted[...]

  • Page 134

    114 GNU Lesser General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D The "Corresponding Application Code" for a Co mbi ned W ork means th e object code and/or source code for the Application, including an y data and utilit y programs needed for reproducin g[...]

  • Page 135

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU Lesser General Public License 115 4. Combined W orks. Y ou may convey a Co m b ine d W o rk un der terms of your cho ice that, taken tog e ther , effec t ively do not restrict modification of the portio ns of the Library contained i[...]

  • Page 136

    116 GNU Lesser General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D 5. Combined Libr aries. Y ou may place li brary fa c ilit ie s that are a work ba s ed on the Library side by side in a s ing le library together with ot he r library facilities that are not Applica[...]

  • Page 137

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 BSD Open Source License 117 B.3 BSD Ope n Source Lic ense For mor e details abou t the Ope n Sourc e TM BSD li ce nse or t he Open Sour ce In itia tive , f ollow the link be low: http://www .opensource .org/licenses/bsd-license .php Cop[...]

  • Page 138

    118 M.I.T License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D B.4 M. I.T L ic ense For mor e details abo ut the Ope n Sourc e TM MIT license or the Open Source Initia tive follow the link below: http://www .opensourc e .org/lice nses/mit -lice nse .php The MIT License Copyright ([...]

  • Page 139

    Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 M.I.T License 119[...]

  • Page 140

    120 Zlib License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D B.5 Z lib L ic ense Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This soft ware is pr ov id ed 'as-is', with out a ny expr ess or implied warranty . In no event will the authors be held liable for a[...]

  • Page 141

    Daniel 3410 Series Ultrasonic Gas Fl ow Meter Installa tion Manual Index 3-9000-759 Rev D June 2014 Manual In dex 121 Appe ndix C: Index C .1 Manual Index A American Dril l Bushing Company ................................. 38 AMS Device Manager - Manual Setup ........................... 87 AMS™ Device Manager and Field Communicator ........ 2 AMS[...]

  • Page 142

    122 Manual Index Index Daniel 3410 Series Ultrasonic Gas Flow Meter In stallation Manual June 2014 3-9000 -759 Rev D Lifting sl ings .................................................... ............ 34 Safety precautions using swivel hoist rings ................. 35 Swivel hoist rings ........................................................ 34 90 d[...]

  • Page 143

    [...]

  • Page 144

    P/N 3-9000-759 Rev D 2014 Daniel Measuremen t and Control, Inc . 11100 Brittmoore Park Drive Houston, TX 77041 USA T+1 713-467-6000 F+1 713-827-4805 USA Toll Free 1 888-356-9001 Daniel Measuremen t Services, Inc. T +1 713-827-6413 www.Daniel.com This product is a core c omponent of the P lantWeb digital plant archi tecture. Europe: Stirling, Scotla[...]