Empire Comfort Systems VFCM-25-3. VFCR-25-3 manual
- Read online or download the manual
- 24 pages
- 2.7 mb
Go to page of
Similar user manuals
-
Electric Heater
Empire Comfort Systems VFSV-16-3
24 pages 1.36 mb -
Electric Heater
Empire Comfort Systems LS-30RS-1
12 pages 9.37 mb -
Electric Heater
Empire Comfort Systems VFSV-24-3
24 pages 1.36 mb -
Electric Heater
Empire Comfort Systems RH-65-6
18 pages 0.7 mb -
Electric Heater
Empire Comfort Systems SR-30
24 pages 1.28 mb -
Electric Heater
Empire Comfort Systems VFSR-30-3
24 pages 1.36 mb -
Electric Heater
Empire Comfort Systems RH-50-6
20 pages 1 mb -
Electric Heater
Empire Comfort Systems 1
60 pages 3.71 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Empire Comfort Systems VFCM-25-3. VFCR-25-3, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Empire Comfort Systems VFCM-25-3. VFCR-25-3 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Empire Comfort Systems VFCM-25-3. VFCR-25-3. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Empire Comfort Systems VFCM-25-3. VFCR-25-3 should contain:
- informations concerning technical data of Empire Comfort Systems VFCM-25-3. VFCR-25-3
- name of the manufacturer and a year of construction of the Empire Comfort Systems VFCM-25-3. VFCR-25-3 item
- rules of operation, control and maintenance of the Empire Comfort Systems VFCM-25-3. VFCR-25-3 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Empire Comfort Systems VFCM-25-3. VFCR-25-3 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Empire Comfort Systems VFCM-25-3. VFCR-25-3, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Empire Comfort Systems service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Empire Comfort Systems VFCM-25-3. VFCR-25-3.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Empire Comfort Systems VFCM-25-3. VFCR-25-3 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Page 1 16937-4-0806 I NST ALLA TION INSTRUCTIONS AND OWNER'S MANUAL CAST IRON UNVENTED ROOM HEA TER MODELS VFCM-25-3 VFCR-25-3 VFCT -25-3 WAT E R V A P O R : A B Y- P R O D U C T O F UNVENTED ROOM HEA TERS W ater vapor is a by-product of gas combustion. An unve nted r oo m heater pr oduce s appr oxi matel y one (1) ounce (30ml) of water for ev[...]
-
Page 2
Page 2 16937-4-0806 SECTION P AGE Important Safety Information ....................................................................................................................................................... 3 Safety Information for Users of LP Gas ..............................................................................................[...]
-
Page 3
Page 3 16937-4-0806 When used without adequate combustion and ventilation air, heater may give off CARBON MONOXIDE, an odorless, poisonous gas. Do not install heater until all necessary provisions are made for combustion and ventilation air . Consult the writ- ten instructions provided with the heater for information concerning combustion and venti[...]
-
Page 4
Page 4 16937-4-0806 Some people cannot smell well. Some people cannot smell the odor of the chemical put into the gas. Y ou must find out if you can smell the odorant in propane. Smoking can decrease your ability to smell. Being around an odor for a time can affect your sensitivity or ability to detect that odor . Sometimes other odors in the area[...]
-
Page 5
Page 5 16937-4-0806 INTRODUCTION I nstructions to Installer 1. Installer must leave instruction manual with owner after installation. 2. Installer must have owner fill out and mail warranty card supplied with unvented room heater . 3. Installer should show owner how to start and operate unven ted room heater . Always consult your local Building De[...]
-
Page 6
Page 6 16937-4-0806 W A TER V APOR: A BY -PRODUCT OF UNVENTED ROOM HEA TERS W ater vapor is a by-product of gas combustion. An unvented room heater produces approximately one (1) ounce (30ml) of water for every 1,000 BTU's (.3KW's) of gas input per hour . Unvented room heaters must be used as supplemental heat (a room) rather than a prima[...]
-
Page 7
Page 7 16937-4-0806 GAS SUPPL Y Check all local codes for requirements, especially for the size and type of gas supply line required. Note: Never use plastic pipe. Check to confirm whether your local codes allow copper tubing or galvanized. Note: Since some municipalities have additional local codes, it is always best to consult your local authori[...]
-
Page 8
Page 8 16937-4-0806 Figure 2 Figure 3 Figure 4 When facing the front of the appliance the following minimum clearances to combustible construction must be maintained. T op of appliance (ceiling) 36 inches Rear W all 3 inches Side W all 6 inches Heater Corners (45° angle) to W all 4 inches Floor 0 inches CLEARANCES Provide adequate clearances aroun[...]
-
Page 9
Page 9 16937-4-0806 Figure 6 Figure 5 FLANGE TOW ARDS BACK DET AIL VIEW RIGHT SIDE REAR COVER LEFT SIDE (4) LEVELING BOL TS Figure 7 CASING BOTTOM[...]
-
Page 10
Page 10 16937-4-0806 LOG PLACEMENT Every burner is shipped with a protective cover . This cover must be removed before log placement. The posi tio nin g of the logs is crit ic al to th e saf e and cl ean oper ati on of this heater . Sooting and other problems may result if the logs are not properly and firmly positioned in the appliance. PROPER IN[...]
-
Page 11
Page 1 1 16937-4-0806 Proper Log Placement Log placement is critical to proper burner performance. Logs must be correctly positioned onto the burner . The photos in this manual show the proper pinned position for logs on this set. Owners need to be shown proper log placement and instructed not to move the logs. Logs must fit firmly onto the burne[...]
-
Page 12
Page 12 16937-4-0806 VFCR -25, VFCT -25 PHOTOS[...]
-
Page 13
Page 13 16937-4-0806 OPERA TION INSTRUCTIONS/FLAME APPEARANCE Flames from the pilot (rear right back side of the pan burner) as well as the main flame should be visually checked as the log set is installed. In normal operation at full rate after 10 to 15 minutes, the flame appearance should be sets of yellow flames. NOTE: all flames will be ran[...]
-
Page 14
Page 14 16937-4-0806 FOR YOUR SAFETY READ BEFORE LIGHTING W ARNING: If you do not follow these instructions exactly , a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly . B. BEFORE LIGHTING s[...]
-
Page 15
Page 15 16937-4-0806 HI/LO REGULA TOR CONTROL KNOB PIEZO IGNITOR FOR YOUR SAFETY READ BEFORE LIGHTING W ARNING: If you do not follow these instructions exactly , a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these[...]
-
Page 16
Page 16 16937-4-0806 FOR YOUR SAFETY READ BEFORE LIGHTING W ARNING: If you do not follow these instructions exactly , a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly . B. BEFORE LIGHTING s[...]
-
Page 17
Page 17 16937-4-0806 Figures 13 and 16 show a correct pilot flame pattern. The correct flame will be blue and will extend beyond the thermocouple. The flame will surround the thermocouple just below the tip. A slight yellow flame may occur where the pilot flame and main burner flame meet. Figures 14 and 17 show an incorrect pilot flame patte[...]
-
Page 18
Page 18 16937-4-0806 PILOT FLAME CHARACTERISTICS (continued) Cleaning and Maintenance/Pilot Oxygen Depletion Sensor Pilot When the pilot has a large yellow tip flame, clean the Oxygen Depletion Sensor as follows: 1. Clean the ODS pilot by loosening nut B from the pilot tubing. When this procedure is required, grasp nut A with an open end wrench. 2[...]
-
Page 19
Page 19 16937-4-0806 MILLIVOL T OPERA TING INSTRUCTIONS VFCR-25 ON/OFF/REMOTE Switch VFCR-25 is equipped with an ON/OFF/REMOTE switch which is located on the wiring chase. A wire harness is attached to the ON/OFF/REMOTE switch. The brown, black and green (wires) female push-ons attach to the ON/OFF/REMOTE switch. At the opposit e end of the wire ha[...]
-
Page 20
Page 20 16937-4-0806 OPERA TING GUIDELINES Before operating this heater , please review the safety warnings pages at the beginning of this manual and those precautions and warnings listed below . 1. Know what type of ignition system this model has (standing pilot) and follow the applicable SAFETY and LIGHTING instructions. 2. Check to ensure there [...]
-
Page 21
Page 21 16937-4-0806 IMPOR T ANT : Operating heater where impurities in air exist may create odors. Cleaning supplies, paint, paint remover , cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors. 1. When ignitor button is pressed, there is no spark at ODS/pilot. a. [...]
-
Page 22
Page 22 16937-4-0806 1 R-5029 CASTING TOP 2 R-5028 CASTING SIDE LEFT 3 R-5027 CASTING SIDE RIGHT 4 R-5026 CASTING FRONT 5 10659 CASING BOTTOM ASSEMBL Y 6 10541 CASING BACK USE ONL Y MANUF ACTURER'S REPLACEMENT P AR TS. USE OF ANY OTHER P AR TS COULD CAUSE INJUR Y OR DEA TH. Index Part No. Number Description VFCM-25, VFCR-25, VFCT -25 COMMON P [...]
-
Page 23
Page 23 16937-4-0806 Parts can be ordered only through your service person or dealer . For best results, the service person or dealer should order parts through the distributor . Parts can be shipped directly to the service person/dealer . All parts listed in the Parts List have a Part Number . When ordering parts, first obtain the Model Number fr[...]
-
Page 24
Page 24 16937-4-0806 SER VICE NOTES Empire Comfort Systems, Inc. Nine Eighteen Freeburg A ve. Belleville, Illinois 62222-0529 PH: 1-800-851-3153 PH: 1-618-233-7420 F AX: 1-800-443-8648 F AX: 1-618-233-7097 E-MAIL: info@empirecomfort.com WEB SITE: www .empirecomfort.com[...]