Go to page of
Similar user manuals
-
Router
EnGenius ESR900
135 pages -
Router
EnGenius ESR1750
135 pages -
Router
EnGenius ESR-1220 Wireless Broadband Router/AP/WDS
44 pages -
Router
EnGenius ESR300
133 pages -
Router
EnGenius SP-980 A SIP Gateway, Server, Client & Trunk
73 pages -
Router
EnGenius ESR1221N2
104 pages -
Router
EnGenius ESR600
135 pages -
Router
EnGenius ESR600H
186 pages
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of EnGenius ESR6670, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of EnGenius ESR6670 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of EnGenius ESR6670. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of EnGenius ESR6670 should contain:
- informations concerning technical data of EnGenius ESR6670
- name of the manufacturer and a year of construction of the EnGenius ESR6670 item
- rules of operation, control and maintenance of the EnGenius ESR6670 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of EnGenius ESR6670 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of EnGenius ESR6670, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the EnGenius service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of EnGenius ESR6670.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the EnGenius ESR6670 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
ESR6670 1 1N Wireless 3G Router (IEEE 802.1 1 b/g/n) User Manual[...]
-
Page 2
T ABLE OF C ONTENTS 1. INTRODUCTION ................................................................................................................... ........................... 1 1.1. S UMMAR Y ............................................................................................................................... 1 1.2. K EY F EA TURES ..[...]
-
Page 3
Revision History V ersion Date Notes 1.0 March 2, 2009 Initial[...]
-
Page 4
1 1. Introduction 1.1. Summary Congratulations on your purchase of ESR6670 3G Wireless Router. ESR6670 is compatible with the most popular 3G standards and 802.11g & 802.11b gadgets. ESR6670 is not only a Wireless Access Point, but also doubles as a 4-port full-duplex Switch that connects your wired-Ethernet devices together at incredible speed[...]
-
Page 5
1.2. Key Features Features Advantages 3G Data Card Support Allows user to share 3G network among multiple users. It supports WCDMA (HSDPA), CDMA2000 and TD-SCDMA. Incredible Data Rate up to 300Mbps** Heavy data payloads such as MPEG video streaming IEEE 802.11b/g Compliant Fully Interoperable with IEEE 802.11b / IEEE 802.11g compliant devices with [...]
-
Page 6
3 1.3. Package Contents Open the package care fully , and make sure that none of the items listed below ar e missing. Do not discard the packing materials, in case of return; the unit must be shipped back in its original package. 1. SOHO Router 2. 100V or 240V Power Adapter 3. 2dBi 2.4GHz SMA Upgradable Antennas x 2 pcs 4. Quick Install Guide 5. CA[...]
-
Page 7
4 1.4. Product Layout[...]
-
Page 8
5 LED Description Power 1 ( On-> red T est/reset default->blink) 3G 1 ( Link-> green on, traffic->blink) W AN 1 ( Link-> blue on, traffic->blink) Internet 1 ( Link-> blue on, traffic->blink) WLAN 1 ( Link-> blue on, traffic->blink) LAN1 1 ( Link-> blue on, traffic->blink) Interface Description Reset Push this but[...]
-
Page 9
2. Installation 2.1. Network + System Requirement s T o begin using the ESR6670, make sure you meet the following as minimum requirements: PC/Notebook. Operating System – Microsoft Windows 98SE/ME/XP/2000/VIST A 1 Free Ethernet port. WiFi card/USB dongle (802.1 1b/g/n) – optional. Internet o 3G data card or o ADSL or Cable m[...]
-
Page 10
2.3. Setup LAN & 3G (W AN) LAN connection: Connect Ethernet cable between your PC/Notebook LAN port & one of the 2 available LAN ports on ESR6670. 3G connection: Plug-in your 3G data card into USB port if you would like to access Internet through 3G network. Contact your ISP if you have any questions concerning the access account and passwo[...]
-
Page 11
8 2.4. PC Network Adapter setup ( Windows XP ) Enter [Start Menu] select [Control panel] select [Network]. Select [Local Area Connection]) icon=>select [properties][...]
-
Page 12
9 Select [Internet Protocol (TCP/IP)] =>Click [Properties]. Select the [General] tab. ESR6670 supports [DHCP] function, please select both [Obtain an IP address automatically] and [Obtain DNS server address automatically].[...]
-
Page 13
2.5. Bring up ESR6670 Connect the supplied power-adapt er to the power inlet port and connect it to a wall outlet. Then, ESR6670 automatic ally enters the self-test phase. During self-test phase, Power LED will blink briefly, and then wi ll be lit continuously to indicate that this product is in normal operation.[...]
-
Page 14
3. Smart Wizard Click <Next> to enter mode selection. Select the mode that ESR6670 is going to be and set its configurations. AP Repeater mode does not enable WAN interface, Setup Wizard will skip WAN Configuration. Click <Next> to automatically detect your Internet Network settings.[...]
-
Page 15
12 You could choose your service type or sele ct Others to setup WAN configurations manually. Smart Wizard has detected DHCP client. Configure the host name and MAC address of ESR6670. Click Next to proceed. Smart Wizard has finished setting up WAN Configuration . Click <Next> to proceed.[...]
-
Page 16
13 Enter the name for your wireless network (SSID) and security key Click <Next> to proceed To apply the entire configuration, click <Reboot> . NOTE: After Wireless settings are applied, you need to connect from your WLAN client with the security settings you just finished configuring. Remember the type of security & security key.[...]
-
Page 17
14 4. Initial Setup ESR6670 ESR6670 uses web-interface for configuration to be accessed through your web browser, such as Internet Explorer or Firefox. - LOGIN Procedure 1. OPEN your browser (e.g. Internet Explorer). 2. Type http://192.168.0.1 in address bar and hit [Enter] button on your keyboard.[...]
-
Page 18
15 3. Click <OK> to navigate into ESR6670 configuration home page. 4. You will see the home page of ESR6670 as follows.[...]
-
Page 19
5. AP Router Mode 5.1. System - S t atus This page allows you to monitor the current status of your router. System: You can see the Uptime, hardware information, serial number as well as fir mware version information. WAN Settings: This section displays whether the WAN port is connecte d to a Cable/DSL connection. It also displays the router’s WA[...]
-
Page 20
17 LAN Settings: This section displays the Router LAN port’s current information. It also shows whether the DHCP Server function is enabled / disabled. WLAN Settings: This section displays the current WLAN configuration settings. W ireless configuration details such as SSID, Security settings, BSSID, Channel number and mode of operation are brief[...]
-
Page 21
18 LAN IP IP address: 192.168.0.1. It is the router’s LAN IP address (the “Default Gateway” IP address of your LAN clients). It can be changed based on your own choice. IP Subnet Mask: 255.255.255.0 Specify a Subnet Mask for your LAN segment. 802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree function is enabled, this [...]
-
Page 22
19 Start IP: This is the beginning of the IP pool for DHCP client hosts. End IP: . This is the end of the IP pool for DHCP client hosts Domain name: The Domain Name for the existing or customized network.[...]
-
Page 23
- DHCP View the current LAN clients which are assigned with an IP Address by the DHCP-server. This page shows all DHCP clients (LAN PCs) currently connected to your network. The table shows the assigned IP address, MAC address and expiration time for each DHCP leased client. Use the <Refresh> button to update the available information. Hit &l[...]
-
Page 24
- Schedule This page allows users to set up schedule function for Firewall and Power Saving . Edit schedule options to allow configuration of f irewall and power savings services. Fill in the schedule and select type of service. Click < Apply > to keep the settings.[...]
-
Page 25
22 The schedule table lists the pre-sch edule service-runs. You can select any of the schedule record using the check box.[...]
-
Page 26
- Event Log View operation event log . This page shows the current system log of the Router. It displays any event occurred after system start up. At the bottom of the page, the system log can be saved <Save> to a local file for further pr ocessing or the system log can be cleared <Clear> or it can be refreshed <Refresh> to get th[...]
-
Page 27
- Monitor Show histogram for network connection on WAN, LAN & WLAN. Auto refresh keeps information updated frequently. - Language This Wireless Router support multiple language of web pages, You could select your native language here.[...]
-
Page 28
25 5.2. Wizard Click Wizard to conf igure the Router. Setup wizard will now be displa yed; check that the modem is connected and click <Next>. The details please refer to Smart Wizard <Page 13>.[...]
-
Page 29
5.3. INTERNET - S t atus This page shows the current Internet connection type and status ESR6670 support s both 3G and ADSL for Internet access. Please note that 3G (USB interface) network by default is th e preferred Internet option. Therefore, in case you have both 3G and ADS L connection setup, ESR6670 will automatically use 3G for Internet acce[...]
-
Page 30
- Dynamic IP Use the MAC address when registering for Internet service, and do not change it unless required by your ISP . If your ISP used the MAC address of the Ethernet card as an identifier , connect only the PC with the registered MAC address to the Router and click the <Cl one MAC Address> button. This will replace the current MAC addre[...]
-
Page 31
- S tatic IP If your ISP Provider has assigned a fixed IP address, ent er the assigned IP addre ss, Subnet mask, Default Gateway IP address, and Primary DNS and Secondary DNS (if available) of your ISP provider .[...]
-
Page 32
- Point-to-Point over Ethernet Protocol (PPPoE) Login / Password: Enter the PPPoE username and password assigned by your ISP Provider . Service Name: This is normally optional. Maximum T ransmission Unit (MTU): This is the maximum size of the p ackets. T ype: Enable the Automatic Connection option to automatically re-est ablish the connection when [...]
-
Page 33
- Point-to-Point T unneling Protocol (PPTP) PPTP allows the secur e connection over the Internet by simply dialing in a local point provided by your ISP provider . The following screen allows client PCs to establish a normal PPTP session and provides hassle-f ree configuration of the PPTP client on each client PC. Click <Apply> to save config[...]
-
Page 34
- 3G Network ISP: It shows a list of supported 3G Network Internet Service Provider . APN Code: Enter APN if ISP requires it. Dial Number: Enter phone number if ISP requires it. User Name: Enter 3G network account / username Password: Enter 3G network account password T ype: Keep Connection: Keep connection with or without the presence of traf fic.[...]
-
Page 35
5.4. Wireless Settings - Basic In basic setting page, you can set wireless Radio, Mode, Band, SSID, and Channel. Radio: You can turn on/off wireless radio. If wireless Radio is off, you cannot associate with AP through wireless. Mode: In this device, we support three operation modes which are AP router and AP route with WDS . If you choose AP Route[...]
-
Page 36
33 ESSID1~4: ESSID is the name of your wireless network. It might be a unique name to identify this wireless device in the Wireless LAN. It is case sensitive and up to 32 printable characters. You might change the default E SSID for added security. Auto Channel: Device will search all valid channels, then select a cleanest channel and change to thi[...]
-
Page 37
- WDS with AP Router Wireless Distribution System, a system t hat enables the wireless interconnection of access point, allows a wireless network to be extended using multiple APs without a wired backbone to link them. Each WDS AP needs same channel and encryption type settings. MAC address 1~4: Please enter the MAC address(es) of the neighboring A[...]
-
Page 38
35 Fragment Threshold: This specifies the maximum size of a packet during the fragmentation of data to be transmitted. If you set this value too low, it will result in bad performance. RTS Threshold: When the packet size is smaller than the RTS threshold, the wireless router will not use the RTS/CTS mechanism to send this packet. Beacon Interval: T[...]
-
Page 39
36 Data Rate: The “Data Rate” is the rate that this access point uses to transmit data packets. The access point will use the highest possible selected tr ansmission rate to transmit the data packets. N Data Rate: The “Data Rate” is th e rate that this access point uses to transmit data packets for N compliant wireless nodes. Highest to low[...]
-
Page 40
- Security This Access Point provides complete wireless LAN security functions, in cluded are WEP, IEEE 802.1x, IEEE 802.1x with WEP, WPA with pre-shared key and WPA with RADIUS. With these security functions, you can prevent your wireless LAN from illegal access. Please make sure your wireless stations use the same security f unction, and are setu[...]
-
Page 41
38 IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to this Access Point before accessing t he wirele ss LAN. The authentication is processed by a RADIUS server. This mode only authenticates us ers by IEEE 802.1x, but it does not encrypt the data during communication. WEP Encryption When you select 64-bit or 1[...]
-
Page 42
39 Authentication Type: There are two authentication types: "Open System" and "Shared Key" . Both AP and wireless client must be configured with t he same authentication type. Key Length: You can select the WEP key length for encryption, 64-bit or 128-bit. The larger the key will be the higher level of security is used, but the [...]
-
Page 43
40 WP A-Radius Encryption Wi-Fi Protected Access ( WPA ) is an advanced security standard. You can use an e xternal RADIUS server to authenticate wireless stations and provide the session key to encrypt data during communication. It uses TKIP o r C C M P ( AES ) to change the encryption key frequently. Press <Apply> button when you are done.[...]
-
Page 44
41 - MAC Address Filtering This wireless router supports MAC Address Control, which prevents unauthorized clients from accessing your wireless network. Enable wireless access control: Enable the wireless access control function Adding an address into the list Enter the "MAC Address" and "Description" of the wireless station to b[...]
-
Page 45
42 WPS is the simplest way to establish a connection between the wireless clients and the wireless router. You don’t have to select the encryption mode and fill in a long encryption passphrase every time when you try to setup a wireless connection. You only need to press a button on both wireless client and wireless router, and the WPS will do th[...]
-
Page 46
43 Authentication Mode: It shows the active authentication mode for the wireless conn ection. Passphrase Key: It shows the passphrase key that is randomly generated by the wireless router during the WPS process. You may need this information when using a device which doesn’t support WPS. Interface: If device is set to repeater mode, you can choos[...]
-
Page 47
- Client List This WLAN Client Table shows the Wireless client associate to this Wir eless Router. - Policy The Router can allow you to set up the Wireless Access Policy. WAN Connection: Allow Wireless Client on specific SSID to access WAN port. Communication between Wireless clients: Allow Wireless Client to communicate with other Wireless Client [...]
-
Page 48
5.5. Firewall Settings The Router provides extensive firewall protecti on by restricting connection parameters, thus limiting the risk of hacker attacks, and defendi ng against a wide array of common Internet attacks. However, for applications that require unrestrict ed access to the Internet, you can configure a specific client/server as a Demilit[...]
-
Page 49
46 packets going to your WAN port IP address to a particular IP address in your LAN. The difference between the virtual server and the DMZ function is that the virtual server re-directs a particular service/Internet application (e.g. FTP, websites) to a particular LAN client/server, whereas DMZ re-directs all packets (regardless of services) from y[...]
-
Page 50
- Denial of Service (DoS) The Router's firewall can block common hacker attacks, including Denial of Service, Ping of Death, Port Scan and Sync Flood. If Internet attacks occur the router can log the ev ents. Ping of Death: Protections from Ping of Death attack. Discard Ping From WAN: The router’s WAN port will not respond to any Ping reques[...]
-
Page 51
48 - MAC Filter If you want to restrict users from accessing certain Internet applications / services (e.g. Internet websites, email, FTP etc.), and then th is is the place to set that configuration. MAC Filter allows users to define the traffic type permitted in your LAN. You can control which PC client can have access to these services. Enable MA[...]
-
Page 52
49 Add PC MAC Address Fill in “ LAN MAC Address ” and <Description> of the PC that is allowed / denied to access the Internet, and then click <Add> . If you find any typo before adding it an d want to retype again, just click <Reset> and the fields will be cleared. Remove PC MAC Address If you want to remove some PC from the &[...]
-
Page 53
50 - IP Filter Enable IP Filtering: Check to enable or uncheck to disable IP Filtering. Deny: If you select “ Deny ” then all clients will be allowed to access Internet except for the clients in the list below. Allow: If you select “ Allow ” then all clients will be denied to access Internet except for the PCs in the list below. Add PC IP A[...]
-
Page 54
51 - URL Filter You can block access to some Web sites from particular PCs by entering a full URL address or just keywords of the Web site. Enable URL Blocking: Enable or disable URL Blocking Add URL Keyword Fill in “URL/Keyword” and then click <Add> . You can en ter the full URL address or the keyword of the web site you want to block. I[...]
-
Page 55
52 Remove URL Keyword If you want to remove some URL keywords from the " Current URL Bl ocking Table ", select the URL keyword you want to remove in the table and then click <Delete Selected> . If you want remove all URL keywords from the table, click <Delete All> button. If you want to clear the selection and re-select again,[...]
-
Page 56
53 5.6. Advanced Settings - Network Address T ranslation (NA T) Network Address Translation (NAT) allows multiple users at your local site to access the Internet through a single Public IP Address or multiple Public IP Addresses. NAT provides Firewall protection from hacker attacks and has the flexibility to allow you to map Private IP Addresses to[...]
-
Page 57
54 Enable Port Mapping: Enable or disable port mapping function. Description: description of this setting. Local IP: This is the local IP of the server behind the NAT firewall. Protocol: This is the protocol type to be forwar ded. You can choose to forward “ TCP ” or “ UDP ” packets only, or select “ BOTH ” to forward both “ TCP ” a[...]
-
Page 58
55 If you want to remove a Port Mapping setting from the " Current Port Mapping Table ", select the Port Mapping setting that you want to remove in the table and then click D<Delete Selected> . If you want to remove all Port Mapping settings from the table, click <Delete All> button. Click <Reset> will clear your current[...]
-
Page 59
56 Enable Port Forwarding: Enable or disable Port Forwarding. Description: The description of this setting. Local IP / Local Port: This is the LAN Client/Host IP address and Port number that the Public Port number packet will be sent to. Protocol: Select the port number protocol type (TCP, UDP or both). If you are unsure, then leave it to the defau[...]
-
Page 60
57 - Port T riggering (Special Applications) Some applications require multiple connections, such as Internet games, video Conferencing, Internet telephony and others. In this section you can configure the router to support multiple connections for these types of applications. Enable Trigger Port: Enable or disable the Port Trigger function. Trigge[...]
-
Page 61
58 selection. Once you have selected an applicatio n, select a location (1-5) in the “Add” selection box and then click the <Add> button. This will automatically list the Public Ports required for this popular application in the location (1-5) you specified. Add Port Triggering Fill in the " Trigger Port ", " Trigger Type ?[...]
-
Page 62
59 - UPNP With UPnP, all PCs in you Intranet will discov er this router automatically. So, you don’t have to configure your PC and it can easily access the Internet through this router. Enable/Disable UPnP: You can enable or Disable the UPnP feature here. After you enable the UPnP feature, all client systems that support UPnP, like Windows XP, ca[...]
-
Page 63
- Quality of Service (QoS) QoS can let you classify Internet application traffic by source/destination IP address and port number. You can assign priority for each t ype of application and reserve bandwidth for it. The packets of applications with higher priority will always go first. Lower priority applications will get bandwidth after higher prio[...]
-
Page 64
61 Unlimited Priority Queue: The LAN IP address will not be bounded in the QoS limitation. High/Low Priority Queue: This can put the p ackets in the protocol and port range to High/Low QoS Queue. Bandwidth Allocation: This can reserve / limit the throughput of specific protoco ls and port range. Y ou can set the upper bound and Lower bound. T ype: [...]
-
Page 65
62 Policy: S pecify the policy the QoS, Min option will reserve the selected data rate in QoS queue. Max option will limit the selected dat a rate in QoS queue. Rate: The data rate of QoS queue. Disabled: This could turn off QoS feature.[...]
-
Page 66
- Routing Y ou can set enable S tatic Routing to let the router forward packet s by your routing policy . Destination LAN IP: S pecify the destination LAN IP address of st atic routing rule. Subnet Mask: S pecify the Subnet Mask of static routing rule. Default Gateway: S pecify the default gateway of static routing rule. Hop s: S pecify the Ma x Ho[...]
-
Page 67
5.7. T OOLS Settings - Admin You can change the password required to log into the Router's system web-based management. By default, the password is: adm in. Passwords can contain 0 to 12 alphanumeric characters, and are case sensitive. Old Password: Fill in the current password to allow changing to a new password. New Password: Enter your new [...]
-
Page 68
65 Remote managemen t This allows you to designate a host in the Internet the ability to configure the Router from a remote site. Enter the designated host IP Address in the Host IP Address field. Host Address: This is the IP address of the host in the Inte rnet that will have management/configuration access to the Router from a remote site. If the[...]
-
Page 69
66 - T ime The Time Zone allows your router to reference or base its time on the settings configured here, which will affect functions such as Log entri es and Firewall settings. Time Setup: Synchronize with the NTP server Time Zone: Select the time zone of the country you are currently in. The router will set its time based on your selection. NTP [...]
-
Page 70
67 PC Date and Time: This field would display the PC date and time. Daylight Savings: The router can also take Daylight Savings into account. If you wish to use this function, you must select the Daylight Savings Time period an d check/tick the enable box to enable your daylight saving configuration. Click <Apply> at the bottom of the screen [...]
-
Page 71
- DDNS DDNS allows you to map the static domain nam e to a dynamic IP address. You must get an account, password and your static domain nam e from the DDNS service providers. This router supports DynDNS, TZO and ot her common DDNS service providers. Enable/Disable DDNS: Enable or disable the DDNS function of this router Server Address: Select a DDN[...]
-
Page 72
- Power Saving power in WLAN mode can be enabled / disabled in this page. - Diagnosis This page could let you diagnosis your current network status.[...]
-
Page 73
- Firmware This page allows you to upgrade the router’s firmware. To upgrade the firmware of your Router, you need to download the firmware file to your local hard d isk, and enter that file name and path in the appropriate field on this page. You can also use the Browse button to find the firmware file on your PC. Once you’ve selected the new [...]
-
Page 74
- Back-up This page allows you to save the current router configurations. When you save the configurations, you also can re-load the saved configuration s into the router through the Restore Settings . If extreme problems occur you can use the Restore to Factory Defaults to set all configurations to its original default settings. Backup Settings: T[...]
-
Page 75
- Reset You can reset the Router when system stops responding correctly or stop functions.[...]
-
Page 76
73 6. Repeater Mode Repeater mode has limited settings compared to the AP mode. Choose “Repeater mode” on the top right corner of the configuration page. System restarts and connects to the IP address http://192.168..0.1 You will see the configuration homepage under “ REPEATER ” mode now.[...]
-
Page 77
6.1. System - Status System status section allows you to monitor the current status of your router. You can see the Uptime, hardware information, serial number as well as firmware version information. LAN Settings: This page displays the Router LAN port’s current LAN & WLAN information. WLAN Settings: Wireless configuration details such as SS[...]
-
Page 78
75 IP address: It is the router’s LAN IP address (Your LAN clients default gateway IP address). It can be changed based on your own choice. IP Subnet Mask: Specify a Subnet Mask for your LAN segment. 802.1d Spanning Tree: This is disabled by default. If 802.1d Spanning Tree f unction is enabled, this router will use the spanning tree protocol to [...]
-
Page 79
76 The schedule table lists the pre-schedule service-r uns. You can select an y of them using the check box.[...]
-
Page 80
77 - Event Log View operation log of ESR6670 . This page shows the current system log of the Router. It displays any event occurred after system start up. At the bottom of the page, the system log can be saved <Save> to a local file for further pr ocessing or the system log can be cleared <Clear> or it can be refreshed <Refresh> t[...]
-
Page 81
78 - Monitor Show the network packets histogram for network connection on WAN, LAN & WLAN. Auto refresh keeps information updated frequently. - Language This Wireless Router support multiple language of web pages, you could select your native language here.[...]
-
Page 82
6.2. Wireless -Basic You can set parameters that are used for the wireless stations to connect to this router. The parameters include Mode, ESSID, Channel Number and Associated Client. Radio: Enable or Disable Wireless function Band: Allows you to set the AP fixed at 802.11b, 802.11g or 802.11n mode. Yo u can also select B+G mode to allow 802.11b a[...]
-
Page 83
80 -Client List This WLAN Client Table shows the Wireless client associate to this Wir eless Router.[...]
-
Page 84
81 -Policy The Router can allow you to set up the Wireless Access Policy. Communication between Wireless clients: Allow Wireless Client to communicate with other Wireless Client on specific SSID. Communication between Wireless clients and wired clients: Allow Wireless Client to communicate with ot her Wireless Client on specific SSID and Wired Clie[...]
-
Page 85
6.3. T ools - Admin You can change the password required to log into the Router's system web-based management. By default, the password is: adm in. Passwords can contain 0 to 12 alphanumeric characters, and are case sensitive. Old Password: Fill in the current password to allow changing to a new password. New P asswo rd: Enter your new passwor[...]
-
Page 86
83 Remote managemen t This allows you to designate a host in the Internet the ability to configure the Router from a remote site. Enter the designated host IP Address in the Host IP Address field. Host Address: This is the IP address of the host in the Inte rnet that will have management/configuration access to the Router from a remote site. If the[...]
-
Page 87
84 - T ime The Time Zone allows your router to reference or base its time on the settings configured here, which will affect functions such as Event Log entries an d Schedule settings. Time Setup: Synchronize with the NTP server Time Zone: Select the time zone of the country you are currently in. The router will set its time based on your selection[...]
-
Page 88
85 PC Date and Time: This field would display the PC date and time. Daylight Savings: The router can also take Daylight Savings into account. If you wish to use this function, you must select the Daylight Savings Time period and check/tick the enable box to enable your daylight saving configuration. Click <Apply> at the bottom of the screen t[...]
-
Page 89
86 - Power Saving power in WLAN mode can be enabled / disabled in this page. - Diagnosis This page could let you diagnosis your current network status.[...]
-
Page 90
87 - Firmware This page allows you to upgrade the router’s firmware. To upgrade the firmware of your Router, you need to download the firmware file to your local hard disk, and enter that file name and path in the appropriate field on this page. You can also use the Browse button to find the firmware file on your PC. Once you’ve selected the ne[...]
-
Page 91
88 - Back-up The page allows you to save (Backup) the router’s current configuration settings. When you save the configuration setting (Backup) you can re-load the saved configuration into the router through the Restore selection . If extreme problems occur you can use the Restore to Factory Defaults selection, this will set all configurations to[...]
-
Page 92
89 - Reset You can reset the Router when system stops responding correctly or stop functions.[...]
-
Page 93
90 Appendix A – FCC Interference Statement Federal Communication Commission Interference St atement This equipment has been tested and found to comply with t he limits for a Class B digit al device, pursua nt to Part 15 of the FCC Rules. These limits ar e designed to prov ide reasonable pro tec tion against harmful interfer ence in a residential [...]
-
Page 94
Appendix B – IC Interference Statement Industry Canada st at ement: This device complies with RSS-210 of the In dustry Canada Rules. Operation is subject to the following two conditions: (1) This device may not ca use harmful interference, and (2) this device must accept any interference r eceived, including interference that ma y cause undesir e[...]