English dropdown-ico

EverFocus ENVS3200 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of EverFocus ENVS3200, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of EverFocus ENVS3200 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of EverFocus ENVS3200. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of EverFocus ENVS3200 should contain:
- informations concerning technical data of EverFocus ENVS3200
- name of the manufacturer and a year of construction of the EverFocus ENVS3200 item
- rules of operation, control and maintenance of the EverFocus ENVS3200 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of EverFocus ENVS3200 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of EverFocus ENVS3200, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the EverFocus service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of EverFocus ENVS3200.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the EverFocus ENVS3200 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    I I n n s s t t a a l l l l a a t t i i o o n n & & O O p p e e r r a a t t i i o o n n M M a a n n u u a a l l E E N N V V S S 8 8 0 0 0 0 / / E E N N V V S S 1 1 6 6 0 0 0 0 / / E E N N V V S S 3 3 2 2 0 0 0 0 N N e e v v i i o o N N e e t t w w o o r r k k V V i i d d e e o o S S e e r r v v e e r r s s[...]

  • Page 2

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 2 of 115 Safety Precautions To avoid any damage, please co nsider the following saf ety warnings: • Never place the recorder n ear heaters, furnaces, other heat sources or in direct sunlight. • Operate the device only in loc ations maintaining the specif ied operating temperature range 0° C~4[...]

  • Page 3

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 3 of 115 W EEE Your EverFoc us product is design ed and manufactu red with high qua lity materials an d components which ca n be recycled and reused. This sy mbol means that electrica l and electronic equipment, a t their end-of-life, s hould be dispose d of separately from your household wast e. [...]

  • Page 4

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 4 of 115 C ON T E NT 1 INTRODUCTION ........ .......... ......... .......... ......... ...... .......... ......... ......... .......... ......... ..... 6 2 MAIN FEATURES ...... .......... ......... .......... ......... ...... .......... ......... ......... .......... ......... ..... 6 3 SPECIFIC A[...]

  • Page 5

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 5 of 115 7 A PPENDIX B: 3 GPP SE TUP EX A MPLES ..... ......... .......... ......... .......... ...... ......... ... 81 7.1 C ONFIGURATIO N IN NVR .... ......... .......... ......... ...... .......... ......... ......... .......... ......... ... 81 7.2 C ONFIGURATIO N M OBIL E P HONE ........ ....[...]

  • Page 6

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 6 of 115 1 I n t r o d u c t i o n The NEVIO NVR network video recor ders are designed f or recording and mana ging IP video devices. Easy and int uitive operation, combin ed with intelligent search functions enable fast and effi cient evaluation of video records. Com patibility with many IP cam e[...]

  • Page 7

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 7 of 115 Video Export USB 2.0 interface or to network drive Network Interface 1 Gbit/s, RJ45, IEEE 802.3 Other Interfaces USB2.0 6 x, PS2 keyboar d/mouse. Optional EKB200 Joystick Alarm I/O Support of I/O contacts of connected IP d evices (depending on specifi cation of IP - device) Monitor Output[...]

  • Page 8

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 8 of 115 3 . 2 S u p po r t e d C a me r a M o d e l s Supported IP Cameras / Video server Status: Version 3.3.6.1 / August 2 010 Manufa cturer Supported Products EverFoc us EAN800 A; EAN80 0AW; EAN850 A; EAN90 0; EDN800 ; EDN850H ; EZN850 ; EVS100; EV S200A; EV S200AW; EVS400 ; EAN750 ; EPN2700; [...]

  • Page 9

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 9 of 115 3 . 3 D i m en s i o n s 12-15/16” 15-11/16” 5/8” 3- 3/4” 3 . 4 D e l iv e ry s co p e • ENVS Server PC Panason ic B B-HCM10 0; BB-H CM110; BB -HCM311; BB -HCM331; B B-HCM 371; BB -HCM381; BB-HC M403; BB-H CE481 ; BB-HCS3 01; BB -HCM-547; B B-HCM511; B B-HC M515; BB-H CM527; BB [...]

  • Page 10

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 10 of 115 • Keyboard • Mouse • Power Cord • Software Licence S/N Document • NVR software installation package. L ocated on the PC desktop under folder EverFocus NVR, if needed to modify/repair the NVR sof tware • Installation and Operation Manual PDF on PC desktop • This Quick Start[...]

  • Page 11

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 11 of 115 4 H a r d w a r e i n s t a l l a t i o n 4 . 1 . F r o n t p a n el c o n tr o l s an d c o n ne c t o r s P owe r s wi tc h Re se t b ut t on P owe r L ED HD D LE D US B Por ts [ 4] A udi o [M icr oph on e, s pea ke r] 4 . 2 . B a c k p a n el c o n ne c t o r s P S/ 2 K bd/ Mo us e Fi[...]

  • Page 12

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 12 of 115 4 . 3 S t a tu s L E D G i g ab i t LA N p o r t The LAN RJ45 socket has 2 integrated LED for status of the LAN connectivit y: 4 . 4 Sy s te m co n n e c t i o n s The NVR series is designed primarily for network r ecording on a Local Area Net work (LAN). Performance while recor ding cam[...]

  • Page 13

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 13 of 115 5 S y s t e m S e t u p 5 . 1 F i r st T i m e Sy s te m S t a r t Wi th fa ct or y de fau lt u ser s et t in gs t he NV R w i l l b oo t au to ma t ic al ly an d st a rt th e N VR so ftw ar e a pp li ca tio n wi tho ut r equ ir in g W i nd ow s Log in a nd Ap pl ic at ion l og in. T he [...]

  • Page 14

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 14 of 115 5 . 3 Q u i c k S t a r t S e t up T his ch ap ter de sc ri bes t he min im u m i n st al la t io n s te ps to in st al l I P-c am er as for st and ar d ( co n tin uo us ) r ec o rd in g. N ote : Th is qu ick st a r t se tu p is ba sed on th e pr emi s e th at al l IP ca me ra s i n th e[...]

  • Page 15

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 15 of 115 2 . O pe n ca me ra se t up me nu >C ON FIG > S ET TI NG > t a b C AM ER A: A fte r se le ct in g the t ab CA ME RA th e sc ree n sh ows c am e ra se tup w it h an e mp ty c am era l is t.[...]

  • Page 16

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 16 of 115 T he ca me ra s et up su pp or ts 2 met ho ds t o ins ta ll ca mer as : +S ea rc h: E xp re ss se tu p fo r c ame ra ty pe s, whi ch su pp o r t UP nP. (Ev er Fo cu s N ev io IP ca me ra se ri es su pp or t U Pn P) . +I ns er t: M an ual i np ut of c am er a da ta for c am er a typ es , [...]

  • Page 17

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 17 of 115 D efa ul t u se r na me an d p as swo rd fo r a n E ve rFo cu s NE VIO c am e r a s is : U se r n ame ( ad mi n l ev el ) : u se r1 Pa ss wo rd : 1 111 11 11 A fte r se t ti ng t he de si red c ame ra s co nfi rm w ith O K t o ad d th ese c ame ra s to th e NV R c ame ra l is t:[...]

  • Page 18

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 18 of 115 Ma nu al IP c ame r a s et up An a lt er n a t iv e to t he s ear ch fu nc ti on is t o se tu p ca mer as , in cl ud ing I P se tt in gs , m an ua l ly . C lic k th e ic on “ +I NSE RT ” to o p en t he ca me ra se tt in g w in dow : En te r Ca mer a Na me, I P p a ram ete r s a nd u [...]

  • Page 19

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 19 of 115 F or ch ang in g fra me r ate a nd r ec o rd in g ima ge qu a lit y, se le ct a ca mer a f ro m t he l ist a nd pre ss t h e CA ME RA SE TTI NG S bu tto n: T he w in dow s ho ws t he cu rr en t ca mer a set ti ng s. Pos si bl e va lu es d epe nd on t he ca me ra ty pe . C han ge t he s e[...]

  • Page 20

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 20 of 115 On l ow er r ig ht si d e o f ca me ra s etu p sc r ee n a re ad di ti ona l se tti ng s f or On S cre e n D is pl ay i nfo rma ti on w hi ch w il l ove rl ay th e ca me ra di sp lay : Wh en s e tti ng s are c om p l ete , cl ic k A PPL Y AL L t o co nfi rm fo r th e se le ct ed ( ch ec [...]

  • Page 21

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 21 of 115 R ecy cl e Ra n ge : in t e r va l (1 h to 1 da y) , h ow o fte n NV R c he ck s t o de let e ol d rec or ds K ee p V id eo : I f c he ck ed, t he NV R wi ll de le te vi de o dat a aft er a d efi ne d t im e pe rio d . I f n ot ch e cke d, t h e N VR wi ll u se t he fu ll H DD ca pa cit [...]

  • Page 22

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 22 of 115 5 . 4 D e t a il ed S e t u p F oll ow ing c ha pt er s d esc ri be t he s et up op ti on s o f t he N VR in a ll d e t a il s. 5.4.1 Setting - General o pe n w it h > CO NFI G > SE TT ING T his m en u def in e s ge ner al p ar ame te rs , d is pla y an d s ta rt -up b eh av ior o [...]

  • Page 23

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 23 of 115 L iv e s tr ea min g se rve r: w ith th is bo x che ck ed, th e st rea mi ng s erv er fo r li ve v iew w ill b e a ct iv at e d a t NV R st ar t R emo te p lay ba ck s e rve r : w ith th is bo x che ck ed , th e st rea mi ng ser ve r for p lay ba ck v iew w ill b e a ct iv at ed at NV R [...]

  • Page 24

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 24 of 115 St at us D is p lay - Di sp lay o pt io n s for g lo ba l st at us d isp la y ( rig ht s ide o f ma in s cr een ) D is p la y op tio ns , d i spl aye d wi th ac ti va ted c h eck bo x • Cu rr en t t ime • Cu rr en t d at e • Fr ee di sk sp a ce (t ot a l for a ll r eco rd in g d ri[...]

  • Page 25

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 25 of 115 A fte r se le ct in g the t ab CA ME RA th e sc ree n sh ows c am e ra se tup w it h an e mp ty c am era l is t. T he ca me ra s et up su pp or ts 2 met ho ds t o ins ta ll ca mer as : +S ea rc h: E xp re ss se tu p fo r c ame ra ty pe s, whi ch su pp o r t UP nP. (Ev er Fo cu s N ev io [...]

  • Page 26

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 26 of 115 Se l e ct a c ame ra fo r in sta ll in g a nd a cti va te th e ch e ck bo x a t l eft s id e : En te r us er n a me a n d p ass wo rd fo r th is ca me ra an d if ap pl ica bl e the c a me ra n am e . D efa ul t u se r na me an d p as swo rd fo r E ve rF ocu s NE VI O c am e r as is : u s[...]

  • Page 27

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 27 of 115 Ma nu al IP c ame r a s et up Al te rn at ive t o th e se ar ch fun ct io n it i s po ss ibl e to s e tu p cam er as i n cl ud ing I P s et ti ng s ma n u al ly . C li ck th e b ut to n +I NS ERT t o op en th e set up w ind ow : En te r IP pa ra me te r a nd u se r n am e / p as sw or d.[...]

  • Page 28

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 28 of 115 F or ch ang in g fra me r ate a nd r ec o rd in g im ag e qua li ty se le ct a ca mer a f r o m th e li st a nd p re ss C AM ER A SET TIN GS b ut to n : T he w in dow s ho ws c ur re nt ca me ra se tt in g s. Pos si bl e va lue s de pe nd on c ame ra ty pe . C han ge t he s e tt ing t o [...]

  • Page 29

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 29 of 115 On l ow er r ig ht si d e o f ca me ra s etu p sc r ee n a re ad di ti ona l se tti ng s f or On S cre e n D is pl ay o ve rla y di spl ay : I f a ll se tt in gs a re do ne , c on fir m wi th OK i n C AM ER A se tu p me nu . OSD on/off OSD of date / date adjustment OSD of time / time adj[...]

  • Page 30

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 30 of 115 5.4.3 Setting - I/O Device This menu defines parameters for di gital inputs and outputs of connected IP devices. The functionality depends on con nected IP - devices. Mo du le Se tt in g D ev ic e n am e o f se lec te d IP de vi ce (a s de fin ed in C AM ERA m e n u ) A dd , M od if y , [...]

  • Page 31

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 31 of 115 5.4.4 Setting - PTZ - Config C ame ra l ist Ava il a bl e ca mer as i n th e sy st em . Se le ct o ne and a cti va te ch ec kbo x fo r e d iti ng PT Z fun ct io ns . B as ic se tti ng s Se le ct th e de vi ce ty pe fr om th e dr op -d ow n men u. Co m po rt Ba ud r at e A ddr es s n o t [...]

  • Page 32

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 32 of 115 5.4.5 Setting - Hotline (communi cation settings) This menu provides com munication settings for m ail, FTP, modem and phone. These settings are mandatory for sev eral alarm reactions in GUARD mode (Send Snapshot to FTP, Phone call, Se nd SMS, Send e-m ail). E-mail Input the following i [...]

  • Page 33

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 33 of 115 5.4.6 Setting - User Accou nt The NVR recorders provide user right management with free assignable user rig hts for each user. In factory setting 1 user with adm inistrator rights is pre-defined: user name: admin no passw ord For user setup are 2 groups of user r ights defined: A d min: [...]

  • Page 34

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 34 of 115 5.4.7 Setting - Address book C on ta ct pe rso n se tt in g s ar e re q u ir ed fo r GU ARD mo de ev ent r eac ti ons "P ho ne cal l " , "S en d SM S" a nd " Se nd ma il ". En te r t he r eq ui re d da ta . Al re ad y de fi ned con ta ct pe rso ns are li st [...]

  • Page 35

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 35 of 115 5.4.8 Setting - Monitor displa y Run Playback on Monitor Selection of m onitor output 1 or 2 for playback window Primary / Secondary Use the arrow b uttons in the middle to add / r emove cameras from the list of selected monitor. Re moved cameras will not be displayed at this monitor. A [...]

  • Page 36

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 36 of 115 5.4.9 Setting - Joystick T he NV R se rie s su ppo rt s E KB -2 00 jo ys ti cks a nd ot he r HID c o mp a ti bl e U SB Jo y st ic ks. I f t he sy ste m d e te ct ed a joy sti ck , N VR w il l sh ow th e se tu p op tio ns u nde r th e ta b J OY ST IC K. Wi th o u t c on ne ct ed jo ys tic[...]

  • Page 37

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 37 of 115 5 . 5 G UA RD - li v e ev en t / ev e n t a ct i o n c o n fi g u r a t io n T he GUA RD mo de a llow s liv e mo n it or in g w it h au tom ati c ev en t rea ct io ns , t ri gge re d by i nte l lig en t v id eo an al yt i cs fu nct io ns . F or th e se tti ng s c li ck o n G UA RD in M a[...]

  • Page 38

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 38 of 115 5.5.1 Event types D epe nd in g on t h e d e vi ce yo u w i ll ge t a ch oi ce of a va il ab le ev en t t yp es : F or ca me ra s: For input contacts:[...]

  • Page 39

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 39 of 115 For system events: The setup options for the event types are described in f ollowing chapters[...]

  • Page 40

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 40 of 115 5.5.1.1 Signal lost event Indicates signal loss f rom this camera. Options: Life Cycle Definition, ho w long the message is s hown Activated Period Permanent (Always Ac tivated) or scheduled functi on (daily time period)[...]

  • Page 41

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 41 of 115 5.5.1.2 General motion event The GENERAL MOTIO N event allows motion detection in f ree definable square detectio n areas. ADVANCED For defining a detection ar ea draw a window b y mouse in the video window. Confirm setting with "R EGION1". You can add more detection a reas by [...]

  • Page 42

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 42 of 115 Sensitivity Sensitivity of motion detecti on, moving slider to rig ht increases sensitivity, moving to lef t decreases sensitivit y. Interval Filter function for motion detecti on. If slider is m oved to right, a longer movement period is needed t o trigger alarm Start / Stop Simulation [...]

  • Page 43

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 43 of 115 5.5.1.3 Foreign object e vent This event type creates an event if an unexpected o bject appears in a def ined zone. Define detection zone Draw the detection zon e by mouse in the vide o window and confirm wit "REGION1". You can also add and subtract areas, as described in detai[...]

  • Page 44

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 44 of 115 Sensitivity Sensitivity of detection, moving slider to rig ht increases sensitivity, moving to l eft decreases sensitivit y. Interval Filter function for detection. I f slider is moved to right, a longer period of object appearin g in detection zon e is needed to trigger alar m. Start / [...]

  • Page 45

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 45 of 115 5.5.1.4 Missing object event The event type MISSIN G OBJECT allows to m onitor automatically objects in t he camera field of view. Removing of the object will trigger an ev ent. Define detection zone Draw the detection zon e by mouse in the vide o window and confirm wit "REGION1&quo[...]

  • Page 46

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 46 of 115 Interval Filter function for detection. I f slider is moved to right, a longer period of object disap pearing in detection zone is needed to trigger alar m. Start / Stop Simulation W ith START SIMULATION you can test, if current settings are correct. Detected movements are displayed in y[...]

  • Page 47

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 47 of 115 5.5.1.5 Camera occlusion event Sensitivity Sensitivity of detection, moving slider to rig ht increases sensitivity, moving to l eft decreases sensitivit y. Interval Filter function for detection. I f slider is moved to right, a longer period of c amera occlusion is neede d to trigger ala[...]

  • Page 48

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 48 of 115 BASIC Options: Life Cycle Definition, ho w long the message is s hown Activated Period Permanent (Always Ac tivated) or scheduled functi on (daily time period)[...]

  • Page 49

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 49 of 115 5.5.1.6 Focus lost event Sensitivity Sensitivity of detection, moving slider to rig ht increases sensitivity, moving to l eft decreases sensitivit y. Interval Filter function for detection. I f slider is moved to right, a longer period of unfocu ssed camera is needed t o trigger alarm. I[...]

  • Page 50

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 50 of 115 BASIC Options: Life Cycle Definition, ho w long the message is s hown Activated Period Permanent (Always Ac tivated) or scheduled functi on (daily time period) 5.5.2 Event actions Each defined event can b e assigned to one ore mor e event actions. Select an event at left side list and cl[...]

  • Page 51

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 51 of 115 Available event actions are: The event actions are desc ribed in following chapt ers. 5.5.2.1 Event action: Play sound After selecting PLA Y SOUND as event action and do uble click opens a window for selecting the sound f ile. Select a file and confi rm with OPEN.[...]

  • Page 52

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 52 of 115 5.5.2.2 Event action: Send E-ma il After selecting SEND E -MAIL as event action and double click o pens a window with a list of available contact perso ns (setup in > CONFIG > SETTING > ADDRESS BOOK required): Select a contact f or E-Mail notification and confirm with OK. 5.5.2.[...]

  • Page 53

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 53 of 115 5.5.2.4 Event action: PTZ preset go This event requires PTZ cam eras with preset function in the system. After selecting PTZ PRE SET GO as event action and double click opens a window for selecting the PTZ camera, preset p osition and event relate d parameters. Confirm the entered values[...]

  • Page 54

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 54 of 115 5.5.2.5 Event action: Si gnal digital output This event action allows to switch a contact output of an installed IP-device. After selecting SIGNAL DIG ITAL OUTPUT as event action an d double click opens a window with all availab le digital output contacts in the system: Activated the che[...]

  • Page 55

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 55 of 115 5.5.2.7 Event action: se nd top central server Reserved for future funct ions 5.5.2.8 Event action: Send sn apshot to FTP In case of an event the s ystem will send a snapshot to the defined FTP server. This event action requires FTP-s erver setup under > CONFIG > SETTING > HOTLI[...]

  • Page 56

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 56 of 115 5 . 6 S c h e d u l e s e t u p The NVR allows contin uous, scheduled or event contr oled recording. The reco rding behaviour is defined in the SCHEDULE menu. Open the SCHEDULE m enu from MAIN console: In factory setting the system will rec ord all cameras in co ntinuous mode.[...]

  • Page 57

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 57 of 115 5.6.1 Setup ne w schedule manuall y Step 1 Left-click and draw th e bar to the time table. T he scheduled time will appear as a grey bar. Step 2 Click the Insert icon and add a new schedule in the R egular Mode, i.e. to record video during the time period you set with 30 FPS, Normal vide[...]

  • Page 58

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 58 of 115 5.6.2 Copy Schedule You may set up the sch edule for each c hannel/camera by repeating the pro cess above, or simply apply the setting of a single c amera to all the others. Copy To 5.6.3 3.5 Week Mode Schedule the cameras for each day of the week differently. In addition, y ou may assig[...]

  • Page 59

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 59 of 115 A d just th e Scheduled S etting: You can manually chang e the setting at any tim e after you insert or load a period of schedule. Option 1: Move the cursor to the Time Ba r and change t he length or move the bar sideway to change the start and end points. Option 2: Click on the Configur[...]

  • Page 60

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 60 of 115 5.6.4 Conigure - Encoding O ption Panel A l w ays Record Select this option to re cord the video at all ti me. Record on Event Sele ct this optio n to obtain the Select E vent panel. From the Smart Guard list, check the b ox of the camera(s) that you want to trigger the recording act ion[...]

  • Page 61

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 61 of 115 5 . 7 E - Ma p T he N VR ser ie s p ro vid es an e- ma p fu nc tio n, w hi ch a llo ws to s how lo ca tio n of in st a l led IP - D ev ice s on ma ps o r o th e r g ra ph ics . I n G UA RD mod e the ma p ca n p opu p a uto ma tic al ly in cas e o f an ev ent an d sh ow th e ev en t l oc [...]

  • Page 62

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 62 of 115 For placing a camera or contact on the map drag an item from device list and drop on the map at desired location. After finalising the la yout finish the edit mode by clicking on OPERATE MODE.[...]

  • Page 63

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 63 of 115 5 . 8 C O U NT I NG A PP L I CA T IO N The integrated Counting Applicatio n allows to count the number of persons, cars or other objects in one or both directions. The counting results can be sho wn in the camera liv e view. For evaluation of counting results the NVR provides a log wit h[...]

  • Page 64

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 64 of 115 Define Object Size Define the estimated o bject size by drawing in the vi deo window. If necessary, the objec t size has to be adjusted a gain after running simulation (in case of no safe detection). Options 1 Way Coun ting: Application will co unt movem ents from REGION 1 to REGIO N 2 o[...]

  • Page 65

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 65 of 115 the camera. Start / Stop Simulation After setting the parameters t he settings can be tested in simulation mode. Count ing results are shown un der RESULT in lower right corner.[...]

  • Page 66

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 66 of 115 5 . 9 N e t wo r k S e rv i c es For remote access to the NVR s ystem are Server - functi onalities required. Th e functions are managed and def ined under NETW ORK SERVICE. For setup go to > CONFI G > NETWORK SERVIC E. 5.9.1 Net w ork service: Live Stre aming This service allows c[...]

  • Page 67

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 67 of 115 Kill Client Stops remote connection to select ed connection f rom the list Kill All Clients Disables all current co nnections OPTIONS NOTE: Changing Server o ptions is only possible, if the service is stopped Port Network port for remote live vie w. All remote client PCs have to use this[...]

  • Page 68

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 68 of 115 Black / White List Remote live access to NVR can be filtered by a W hite List (selected I Ps can access) or a Black List (selected IP s are blocked for access). White List Check the “Enable W hite List” box to activate the white list filter. Only IP from the white list is allowed to [...]

  • Page 69

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 69 of 115 Performance This tab shows current network streaming perform ance for total system and f or selected live connection. 5.9.2 Net w ork Service: Remote Pla yback Total bit rate Individual Camera bit rate Live Streaming Server log information[...]

  • Page 70

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 70 of 115 5.9.2 Net w ork Service: Remote Pla yback W hen starting the remote playback function of your computer, you allow remote users to log on to the specific com puter and withdraw dat a files that are stored on it. As system administrator, you are able to mo nitor the accou nts that log on i[...]

  • Page 71

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 71 of 115 is 64, one account cou nts as one connection. User Default Web Server If checkbox is activated, clie nts will be able to watch playback video via Internet Explor er. The port for live s treaming server is set to 80 by default. Save log Save log file to specific f older Black / White List[...]

  • Page 72

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 72 of 115 Performance This tab shows current network streaming perform ance for total system and f or selected live connection. 5.9.3 Net w ork Service: Remote Pla yback Total bit rate Individual Camera bit rate Plaback Streaming Server log information[...]

  • Page 73

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 73 of 115 5.9.3 Net w ork Service: 3GPP Service W hen starting the 3GPP service function of your computer, you allow remote users to lo g on the 3GPP supported m obile phone and vie w cameras that are con nected to it. See Appendix B for more details ab out 3GPP Service. Service Start / Stop By cl[...]

  • Page 74

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 74 of 115 5.9.4 Net w ork Service: Remote Des ktop W hen starting the Re m ote D esktop option of your computer, you allow remote user s to use Remote Desktop Tool t o login and configurat ion system. See Appendix C t o install and use this tool. Port Assi gn a port for Desktop tool to l ogin and [...]

  • Page 75

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 75 of 115 5.9.5 Net w ork Service: Central M anagement This functionality is res erved for future applicat ion.[...]

  • Page 76

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 76 of 115 6 A p p e n d i x A : D B T O O L The DB Tool Repair dat abase files and Export c onfigurations. NOTE : improper use of this DB Tool may cause lose of the recorded video data. Step 1: Execute DB Tool f rom program files. Step 2: Enter the passwor d of administrator to logi n. Step 2 Step[...]

  • Page 77

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 77 of 115 6 . 1 R e p a i r Da t a b a se This page has three re pair method, Modif y Location, Verify Only, and Repair. For modify location propose: Playback system can recogni ze all recording video in t he folders which list on Main Console > Config > Setti ng > General page. For some [...]

  • Page 78

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 78 of 115 Example of database m odification: In certain case that wh en video data needs to be tr ansfer from old PC to another new PC, user will need to p erform the following procedure. 1. Manually copy all recor ded video data from the d efault installation path or other user- defined storage p[...]

  • Page 79

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 79 of 115 The system will list all video locatio ns in table, but if there are any omi t, please use to insert. Note: After inserting location, the system will show files count b elow table. Step 4: Choose the met hod of “Verif y On ly”, and click “verif y”. This method will only check the[...]

  • Page 80

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 80 of 115 6 . 2 E x p o r t C on fi g u r a ti o n s This tool allows to exp ort the complete configuratio n to a file. Step 1: Press “Export”. Step 2: Select the loca tion you want to Export and ty pe the name of the config urations. Step 3: Press “Save” to start to im port database.[...]

  • Page 81

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 81 of 115 7 A p p e n d i x B : 3 G P P s e t u p e x a m p l e s How to setup 3GPP streaming con nection (using BenQ-Siem ens mobile phon es) 7 . 1 C o n fi gu r at i o n i n N V R Step 1 : Go to Config and select Network Service[...]

  • Page 82

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 82 of 115 Step 2 : Select 3GPP Service , and then click Start Note: In the Option item, the port selected here is the same port fr om mobile handset 7 . 2 C o n fi gu r at i o n M o bi le P h o n e 7.2.1 BenQ-Siemens E81 Step 1 : Goto Menu, then Intern et[...]

  • Page 83

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 83 of 115 Step 2 : Select Book marks Step 3 : Add New Bookmar k Step 4: Configure the Addr ess setting as the following exampl e. Ex: rtsp://61.216.97.69:554/medi a00.3gp 61.216.97.69:554 is the I P address of NVR system Port : port specified in 3GPP Service in NVR system Step 5 : Save the setting[...]

  • Page 84

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 84 of 115 7.2.2 BenQ P50 1. Connect GPR S 2. Download and install the [PLATFORM4] software. 3. Execute Main Console. 4. Press the [Config]  [Network Serv ice]  [Start][...]

  • Page 85

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 85 of 115 5. Open [PLATFORM4], press the button framed by red into Option 6. [Open Url] enter the rtsp ad dress of the c amera (EX: rtsp://61.216.97.69/media00.3gp  ch annel 1 EX: rtsp://61.216.97.69/me dia01.3gp  channel 2 EX: rtsp://61.216.97.69/me dia02.3gp  channel 3)[...]

  • Page 86

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 86 of 115 7. [Setting I]change the setting and press “OK” [Protocol] TCP [Buffer Size] 60 [Connection TimeOut] 103 [Data Recept. TimeOut] 100 [Deblocking Filter] check 8. Go back to P LAT F ORM4, searching and th en getting the video[...]

  • Page 87

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 87 of 115 8 A p p e n d i x C : I n s t a l l a t i o n o f R e m o t e D e s k t o p T o o l Installation Step 1: Insert the Installation C D. Step 2: Please go to R emoteDesktopViewer directl y and Run Setup.exe fil e. Start Remote Deskto p Tool Step 1: Please point to St art > All Programs &[...]

  • Page 88

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 88 of 115 9 . A p p e n d i x D – O n l i n e L i c e n s e P r o c e d u r e s C o n te nt s • 9.1 Overview • 9.2 Rationale • 9.3 Activation o 9.3.1 Activate by inputting seri al number (SN)  9.3.1.1 Online  9.3.1.2 Offline o 9.3.2 Activate by importing seri al number (SN) fi les (t[...]

  • Page 89

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 89 of 115 9 . 2 R a t i o n al e Using online license can resolv e several issues such as... No more DOA/RMA issues bec ause of hardw are failure : If som ething is wrong with your license, EverFocus can check t he license status f or you and have it fixed online. No more hardw are compatibility i[...]

  • Page 90

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 90 of 115 4.) MainConsole will be restarte d if activated successf ully. 9.3.1.2 Offline In many cases, machines are i nstalled in an environm ent without int ernet access. You may choose offline activation f or these cases. In these cases, you ne ed another (temporary) PC with internet acces s wh[...]

  • Page 91

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 91 of 115 2.) Select “Off line” as Activate type. 3.) Input the “SN (Serial n umber)”, and then click on “Act ivate” button. 4.) W hen you click on activate, it will p resent a window to ask where you want to save the off line license files, pleas e make a new folder, sa y offline lice[...]

  • Page 92

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 92 of 115 5.) From another PC w hich is connected to internet, in t he folder “off line license” f ind a file named OffLineTool. exe and execute it, click “Ac tivate” to send the request f ile to the license server.[...]

  • Page 93

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 93 of 115 6.) W hen you click on activate, it will p resent a windows to ask where you want to save the “License file” (dll format). You must then copy this li cense file back onto the NVR computer.[...]

  • Page 94

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 94 of 115 7.) Go back to the NVR computer (which is not connecte d to internet) and open th e “License Manager” Tool again. Select “I mport license f ile”, choose the path to the licens e file, then click the “Activate” butt on to proceed.[...]

  • Page 95

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 95 of 115 8.) Main Console will be restarted if license file is import ed successfully. 9 . 3 .2 A ct iv a t e by im po r t i n g se r i a l n um b er ( S N) f i l es (t xt f o rm at ) If you want to activate several s erial numbers on one serv er, you can use this opti on to activate several sets[...]

  • Page 96

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 96 of 115 4.) MainConsole will be restarte d if activated successf ully. 9.3.2.2 Offline In many cases, machines are i nstalled in an environm ent without int ernet access. You may choose offline activation f or these cases. In these cases, you ne ed another (temporary) PC with internet acces s wh[...]

  • Page 97

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 97 of 115 2.) Select “Off line” as Activate type. 3.) Select “Import SN file”, choose a text file containing multiple s erial numbers, and then click on“Activate” button. 4.) W hen you click on activate, it will p resent a window to ask where you want to save the off line license files[...]

  • Page 98

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 98 of 115 5.) From another PC w hich is connected to internet, in t he folder “off line license” f ind a file named OffLineTool. exe and execute it, click “Ac tivate” to send the request f ile to the license server.[...]

  • Page 99

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 99 of 115 6.) W hen you click on activate, it will p resent a windows to ask where you want to save the “License file” (dll f ormat). You must then c opy this license file back onto the NVR computer.[...]

  • Page 100

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 100 of 115 7.) Go back to the NVR computer (which is not connecte d to internet) and open th e “License Manager” Tool again. Select “I mport license f ile”, choose the path to the licens e file, then click the “Activate” butt on to proceed.[...]

  • Page 101

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 101 of 115 8.) Main Console will r estart if the license file is imported successfully. 9 . 3 .3 A ct iv a t e fr om d on g le If you already have a dongl e connected, you ar e able to activate the license by converting the physical dongle to a virtual serial number. 9.3.3.1 Online 1.) Open “Lic[...]

  • Page 102

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 102 of 115 4.) Main Console will be restarted if activated successf ully. • Note: After the conversion, that dong le will be invalid.[...]

  • Page 103

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 103 of 115 9.3.3.2 Offline In many cases, machines are i nstalled in an environm ent without int ernet access. You may choose offline activation f or these cases. In these cases, you ne ed another (temporary) PC with internet acces s which will act as a proxy to interact with the lice nse server. [...]

  • Page 104

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 104 of 115 4.) W hen you click on activate, it will p resent a window to ask where you want to save the off line license files, pleas e make a new folder, sa y offline license, to save these f iles then click on OK. Next, copy this folder to another PC which is con nected to Internet. 5.) On anoth[...]

  • Page 105

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 105 of 115 6.) W hen you click on activate, it wi ll present a windows to ask where you want to save the “License file” (dll f ormat). You must then c opy this license file back onto the NVR computer.[...]

  • Page 106

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 106 of 115[...]

  • Page 107

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 107 of 115 7.) Go back to the NVR computer (which is not connecte d to internet) and open th e “License Manager” Tool again. Select “I mport license f ile”, choose the path to the licens e file, then click the “Activate” butt on to proceed.[...]

  • Page 108

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 108 of 115 8.)Main Console will re start if the license file i s imported successfull y. • Note: After the conversion, the d ongle will be inval id. 9 . 4 T r a n s fe r (D e -a ct i v a ti on ) W hen y ou are migrating a system to a different PC, or re-installing a system, FI RST you need to ma[...]

  • Page 109

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 109 of 115 3.) After transfer, serial numb ers will become de-activate d. 9 . 4 .2 O f fl i n e tr a n s f e r Before transferring serial numbers, w e str o ngly recommend you transcribe the serial number so that you w ill not forget it w hen you need to re-activate. In many cases, NVR machin es a[...]

  • Page 110

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 110 of 115 4.) W hen clicking on transfer, it will present several messages and a windo w to ask you where you want to save the off line transfer tools, please m ake a new folder named ‘offline transfer’ to save t hese files then click on OK. Next, copy this folder to an other PC which is conn[...]

  • Page 111

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 111 of 115 5.) On another PC which is connecte d to internet, in the f older you created, off line license, please f ind a file named OffLineTool.exe an d execute it, click “Transf er” to send the request file to the license serve r.[...]

  • Page 112

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 112 of 115 6. Check if transfer proc ess is completed.[...]

  • Page 113

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 113 of 115 9 . 5 T he s t at e s o f a s e ri al n u m b e r A serial number can be at vario us states. The table lists the states below. State Description Ready The serial number is avail able for registration. Activated The serial number has already been registered. Deleted The serial number is [...]

  • Page 114

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 114 of 115 9 . 6 .2 W h a t i f I l o s e m y s e r ia l nu m be rs ? You should be able to keep recor ds of your purchased serial numbers. If you do lose them, please contact your reseller or sales co ntact. 9 . 6 .3 W h a t i f s o me o ne u s e s m y s e r ia l n u m b er s? If your serial numb[...]

  • Page 115

    ENVS800 / ENVS1600 / EN VS3200 Installation Manu al 115 of 115 NVR_Inst_Rev02.doc[...]