English dropdown-ico

EverFocus EPTZ2700i manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of EverFocus EPTZ2700i, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of EverFocus EPTZ2700i one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of EverFocus EPTZ2700i. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of EverFocus EPTZ2700i should contain:
- informations concerning technical data of EverFocus EPTZ2700i
- name of the manufacturer and a year of construction of the EverFocus EPTZ2700i item
- rules of operation, control and maintenance of the EverFocus EPTZ2700i item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of EverFocus EPTZ2700i alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of EverFocus EPTZ2700i, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the EverFocus service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of EverFocus EPTZ2700i.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the EverFocus EPTZ2700i item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    S peed Dome EPTZ2700/EPTZ2700I USER MANUAL Date: Oct. 2008[...]

  • Page 2

    2 T able of Content s 1. EPTZ2700/EPTZ2700I OVER VIEW ........................................................ 5 1.1. Introducti on ................................................................................................ 5 1.2. Specifications ............................................................................................. 7 1.3[...]

  • Page 3

    3 3.2.1. EXPOSURE ........................................................................................ 33 3.2.2. FOCUS MO DE .................................................................................... 35 3.2.3. DIGIT AL ZOOM ................................................................................... 35 3.2.4. WHITE BALA NCE ...[...]

  • Page 4

    4 3.6. ALARM ...................................................................................................... 53 3.6.1. ALARM INPU TS .................................................................................. 53 3.6.2. ALARM OUTP UTS .............................................................................. 56 3.6.3. EXIT ........[...]

  • Page 5

    5 1. EPTZ2700/EPTZ2700I OVERVIEW 1.1. Introduction EPTZ2700 series has 2 types, EPTZ2700 is outdoor type whereas EPTZ2700I is indoor type, using high sensitivity and hi gh resolution CCD to display high quality image. The design of ICR (IR cut filter re movable) can provide real color even under strong sunlight in day time. Under slight li ght in n[...]

  • Page 6

    6 Furthermore, the micro control unit enables camera a nimble and exact movement from minimal 0.01°/sec to maximal 360°/sec. It can go to every preset position in 1 second. It also has other advantages such as: ¾ 192 preset positions are available. ¾ 16 cruise tours can be set, and each t our contains up to 16 positions. ¾ Up to 256 speed dome[...]

  • Page 7

    7 1.2. S pecifications Product Model EPTZ2700 (outdoor) EPTZ2700I (indoor) Pickup Device 1/4” CCD V ideo Format NTSC or P AL Scanning System NTSC: 525 TV lines, 60 fields/sec P AL: 625 TV lines, 50 fields/sec. Picture Elements 768 x 494 (NTSC) 752 x 582 (P AL) Horizontal Resolution More than 480 TV Lines Sensitivity 1 Lux/ F1.5 (Normal) 0.01 Lux/[...]

  • Page 8

    8 Horizontal Rot ation Range 360° unlimited rotation T ilt Rotation Range 90° pendulum motion Auto Zoom S peed Control Control speed auto-adjusted according to zoom length changing Auto Pan, 2 points scanning Can set freely Auto Pan S peed 1 － 255 grade available Dwell T ime (2 points) 1 － 99 second available Preset Positions 192 positions Ru[...]

  • Page 9

    9 1.3. Feature 1.3.1. Profile of EPTZ2700/EPTZ2700I W all Mount Bracket Sun shield ( o p tional ) Bubble Camera main body T op housing Camera module Outer housing EPTZ2700I Bubble Outer housing T op hous ing Camera main body Camera Module EPTZ2700[...]

  • Page 10

    10 1.3.2. EPTZ2700/EPTZ2700I Base Board The base board that is inside the top housi ng connects to power cable, video cable, control cable, alarm cable and fan. In order to connect to cables, the board needs to be taken of f, and put back after finishing connec ting to all cables. The connectors of cable names are marked on the board in white text.[...]

  • Page 11

    11 Pin # Function 1 ALM_NO_B (Alarm Output Normal Open B) 2 ALM_COM_B (Alarm Output Common B) 3 ALM_NC_B (Alarm Output Normal Close B) 4 ALM_NO_A (Alarm Output Normal Open A) 5 ALM_COM_A (Alarm Output Common A) 6 ALM_NC_A (Alarm Output Normal Close A) 7 ALMIN1 (Alarm Input 1) 8 GND (Ground) 9 ALMIN2 (Alarm Input 2) 10 ALMIN3 (Alarm Input 3) 1 1 GND[...]

  • Page 12

    12 1.4. EPTZ2700/EPTZ2700I Quick Oper ation Guide (W ork with EKB500) EPTZ2700/EPTZ2700I and EKB500 (Keyboard) can work together by using factory default setting. Y ou just need to connect cables by the followin g steps: 1. Connect the RS-485 cable to EPTZ 2700/EPTZ2700I and a keyboard (EKB500). 2. Connect a video cable from EPTZ2700/EPTZ2700I to a[...]

  • Page 13

    13 2. EPTZ2700/EPTZ2700I INST ALLA TION 2.1. Packing List There are 3 boxes that are camera main body with a camera module, top housing with a base board & pin connector and outer housing wit h bubble, plus one tool packet in the package. The detail accessories are listed below: S tandard ¾ Camera Main Body x 1 ¾ T op Housing x1 ¾ Outer Hous[...]

  • Page 14

    14 2.2. Cable Needed Power Cable An adapter with 24V AC/3.5A output provides the power to the EPTZ2700/EPTZ2700I. An extension power line may be needed. Note: The input AC voltage range of an adapter depends on different area. Please make sure the voltage range before inst alling. V i deo Cable A BNC cable is used for connecting an EPTZ2700/ EPTZ 2[...]

  • Page 15

    15 2.3. Initial Setup Initial setup includes dome address, commu nication protocol, transmission speed, and terminal resistance settings. All of the setti ngs should be confirm ed before the dome is installed. The control-related setting that is address, communication protocol and transmission speed have to be set consistently with the control devi[...]

  • Page 16

    16 O N 1 2 3 4 5 6 7 8 O N 1 2 3 4 5 6 7 8 ID address Protocol/Baud rate/ T e rminal resistance[...]

  • Page 17

    17 ON 12345678 Swit ch Address 1 ON 12345678 2 ON 12345678 3 ON 12345678 4 ON 12345678 5 ON 12345678 6 ON 12345678 7 ON 12345678 8 ON 12345678 9 ON 12345678 10 ON 12345678 11 ON 12345678 12 ON 12345678 Switch Address 13 ON 12345678 14 ON 12345678 15 ON 12345678 16 ON 12345678 17 ON 12345678 18 ON 12345678 19 ON 12345678 20 ON 12345678 21 ON 1234567[...]

  • Page 18

    18 ON 12345678 Switch Address 129 ON 12345678 130 ON 12345678 131 ON 12345678 132 ON 12345678 133 ON 12345678 134 ON 12345678 135 ON 12345678 136 ON 12345678 137 ON 12345678 138 ON 12345678 139 ON 12345678 140 ON 12345678 Switch Address 141 ON 12345678 142 ON 12345678 143 ON 12345678 144 ON 12345678 145 ON 12345678 146 ON 12345678 147 ON 12345678 1[...]

  • Page 19

    19 2.3.2. Communication Protocol Setting The 1 st , 2 nd and 3 rd bits are used to set communicati on protocol. The factory default protocol is EVF . Notice: Please make sure the power is off before setting, and rest art the EPTZ2700/EPTZ2700I to enable a new value after changing. Set all of protocol switches to ON; the speed dome EPTZ2700/EPTZ2700[...]

  • Page 20

    20 2.4. Bracket and Speed Dome Inst allation 2.4.1. Inst allation Requirements 1. Installation should be handled by a qualif ied service agent and should comply with all local regulations. Service personnel shou ld expect potential problems such as surface strength, surface material, falling ob jects, outer breaches, building vibration or other sim[...]

  • Page 21

    21 Pull here to open 2.4.2. EPTZ2700 Dome Camera Installation Note: Installation location that is a wall, a pole or a ceiling needs to support above five times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and dropping. 1. Pull the hole of the base board to open it. Det ach the power and RS485 wir es first by using a[...]

  • Page 22

    22 Pull open this switch 2. Apply the adhesive stripe at back of desi ccant pa ck to the inner side of the top housing. There are tot ally 3 desiccant packs to be applied. 3. When all the desiccant packs are p asted and alarm cables are connected properly , put the base board back to its original place, you will need to pull open the switch in orde[...]

  • Page 23

    23 4. Connect the cable you detached from base board to the RS485 cable, Power cable and video cable you tread from the wall or ceiling. RS485 cable has to be connected via a terminal block. If you need to connect alarm cable, thread the alarm cable through the second hole. 5. Screw in 4 screws for mounting the bracket base. V ideo cable Power cabl[...]

  • Page 24

    24 6. Thread the cable through the bracket. 7. Screw the top housing to brac ket by using a hexagon wrench.[...]

  • Page 25

    25 8. Screw in 4 long screws to fix the bracket to bracket base. 9. Pull the hole of base board to open it aga in. Connect the power and RS485 wires back to power pin and RS485 pin. If you need to c onnect alarm, connect alarm cable to alarm pin. 10. There is a rope pendant from the top housing, this is used to support main body . The steps of how [...]

  • Page 26

    26 a. Locate the hook first. b. Clasp the rope to the hook firmly . Hook[...]

  • Page 27

    27 c. Done![...]

  • Page 28

    28 1 1. Hold and push the main body toward the bracke t until it is firmly fi xed to the bracket. T o release it, press orange buttons at both sides of the body . 12. T wist the cover of main body to top housi ng clockwise until it is firmly fixed to top housing.[...]

  • Page 29

    29 Note 1: In order to protect the bubble from dirt and scrape, please put on the gloves before installing the bubble. Note 2: The camera module on the mechanical p art is very sensitive. Please be careful when installing this p art . 13. T urn on the power , and star t to operate the EPTZ2700. Note: When turning on the power , EPTZ2700 will enter [...]

  • Page 30

    30 2.5. Accessories 2.5.1. EPTZ-CPMA: Ceiling Pendant Mount Adapter The ceiling pendant mount adapter is used for installing a speed dome on the ceiling indoors or outdoors. The extension poles are av ailable for the pole mount. 2.5.2. EPTZ-PMA: Pole Mount Adapter The pole adapter is used for installing a wall mount bracket to a pole indoors or out[...]

  • Page 31

    31 2.5.3. EPTZ- CMA: Corner Mount Adapter The corner mount are used for installing a wa ll mount bracket to a 270° corner of walls indoors or outdoors.[...]

  • Page 32

    32 3. EPTZ2700/EPTZ2700I CAMERA SETUP MENU In this section, setup and operation guide of EPTZ2700/EPTZ2700I will be introduced. There are 8 items of the setting menu. 3.1. S t ructure of the Setup Menu Press MENU to enter camera setup menu. T urn the Joystick up/down to change subentries , and right/left to change the setting. If there is an arrow [...]

  • Page 33

    33 3.2. VIDEO SETTINGS In main menu, turn joystick Up / D own to select VIDEO SETTINGS. T urn joystick Left / Right to enter VIDEO SETTINGS sub-menu (see diagram 3.2). (diagram 3.2) (diagram 3.3) 3.2.1. EXPOSURE In Exposure menu, there is a sub-menu. Press Enter key or turn joystick Left / Right to enter Exposure sub-menu. VIDEO SETTINGS POSITIONS [...]

  • Page 34

    34 There are 4 options in Exposure: EL. S HUTTER, SLOW SHUTTER, IRIS MODE, and AE SPEED. EL.SHUTTER: Select electronic shutter mode from the options of the menu. There are AUTO, A.FLK , 1/50, 1/125 , 1/250 , 1/1000 , 1/2000 and 1/10000. AUTO: Auto electrical shutter A.FLK: Anti-Flicker . Camera will auto adjust the shutter to reduce the flicker cau[...]

  • Page 35

    35 NOTE: If EL. SHUTTER is selected, SLOW SHUTTER will be disabled. IRIS MODE: MANUAL: Manual Iris. AUTO: Auto Iris. EXIT : Select Exit to save settings and exit from current page. 3.2.2. FOCUS MODE In Focus mode, we define focus type from ONE PUSH, AUT O and Manual . ONE PUSH: Enable the one push trigger focus mode. The focus lens holds the same p[...]

  • Page 36

    36 AUTO: this mode computed the white balance val ue output using color information from the entire screen. It outputs t he proper value using the color temperature radiating from a black subject based on a range of values. INDOOR: Camera’s white balance is fixed to indoor 3200 K. OUTDOOR : Camera’ s white balance is fixed to outdoor 5100 K. 3.[...]

  • Page 37

    37 3.2.7. COLOR In Color , we define color of the image. Select from ON and OFF . ON: Color image OFF: B/W image 3.2.8. NEGA TIVE In Negative mode, it will switch ON/OFF the negative art image output. Select from ON and OFF . 3.2.9. WIDE DYNAMIC RANGE In Wide Dynamic Range (WDR), we define wide dynamic range from AUTO , ON and OFF . This function i[...]

  • Page 38

    38 3.3. POSITIONS In main menu, turn joystick Up or Down to select POSITION option. Press Enter key or turn joystick Left / Right to enter POSITION s ub-menu (See diagram 3.4). (diagram 3.4) Press Enter key of keyboard to enter SET POSITIONS sub-menu. T urn the joystick Left / Right to select preset position. There are totally 36 preset positions c[...]

  • Page 39

    39 (diagram 3.6) POSITION: Select from SET and CLEAR. SET : Selec t SET and press Enter key of key board, you will be entered to a sub-menu. T urn the joystick to your desired position. Once the position is confirmed, press IRIS+ key of keyboard to save setti ng and return to previous menu. Clear: Select Clear and press Enter key of ke yboard, and [...]

  • Page 40

    40 SPEED : Select the speed for the preset position. The value is from 1 to 255 and 255 is the highest speed. DWELL TI ME (S): Select the dwell time (in second) fo r the preset positi on from 1 to 99. FOCUS MODE: Select focus mode for the preset pos ition from MANUAL, ONE PUSH and AUT O. WHITE BALANCE: Select the white balance for the pr eset posit[...]

  • Page 41

    41 3.4. OSD/AREAS In main menu, turn joystick Up or Down to select OSD/AREAS. T urn joystick Left or Right to enter OSD/AREAS sub -menu (see diagram 3.8) (diagram 3.8) 3.4.1. CAM. TITLE Enter title name for the camera. T u rn the joystick Up or Down to select the character . T urn the joystick Left or Right to select the character position. Once th[...]

  • Page 42

    42 In zone menu, you can set a zone and name it, when the speed dome turns to the zone you set, it will display zone name on the screen (only if “OSD/AREAS->Display -> Zone” is set as “YES”). T urn the joystick to Up/Down to select the character . T urn the joystick Left or Right to select the character position. On ce the title is in[...]

  • Page 43

    43 T urn joystick Right/Left to highlight the zone you have set and turn t he joystick Up/Down to select another zone number . If you wish to cl ear the zone you have set, go to “CLR” and press Enter key . 3.4.3. DIRECTIONS Press Enter key of keyboard or turn joysti ck Left/Right to enter DIRECTIONS sub-menu (see diagram 3.12) (diagram 3.12) Pr[...]

  • Page 44

    44 3. Press IRIS+ key of keyboard to save and return. (diagram 3.14) 4. Go to “DEF AUL T NOR TH” and press Enter ke y to set the north position as default north position. 5. Go to Return and turn joystick Lef t/Right to return to previous menu. DIRECTIONS NORTH SET NOR T H <┘ DEF AUL T NORTH [PUSH ENT] RETURN[...]

  • Page 45

    45 3.4.4. DISPLA Y Press Enter key of keyboard or turn joysti ck Left/Right to enter DISPLA Y sub- menu (see diagram 3.15) (diagram 3.15) 1. SHOW OSD: ON: show OSD of Camera T itle, Directions, Z ones, Preset T itle, Motion, Zoom, Fan and Camera S tatus. OFF: do not show OSD. 2 SEC: show OSD for 2 seconds. 5 SEC: show OSD for 5 seconds. 10 SEC: sho[...]

  • Page 46

    46 4. ZONES YES: show zones NO: do not show zones 5. PRESET TITLE YES: show preset title NO: do not show preset title 6. ZOOM YES: show zoom multiple when zoom in or zoom out. NO: do not show zoom multiple. 7. F AN YES: show fan indication when fan is enabled. NO: do not show fan indication. 8. CAMERA ST A TUS YES: shows camera status NO: do not sh[...]

  • Page 47

    47 3.5. AUTO MODES In main menu, turn joystick Up /Down to select AUTO MODES. Turn joystick L eft/Right to enter AUTO MODES sub-menu (See diagram 3.16) (diagram 3.16) 3.5.1. AUTOP AN Press Enter key of keyboard or turn joystick Lef t/Right to enter AUTOP AN sub-menu (see diagram 3.17) (diagram 3.17) a. ENDLESS MODE ON: enable endless mode. The spee[...]

  • Page 48

    48 auto-pan. OFF: disable endless mode. The speed dome will perform auto-pan between position left and position right. b. SPEED Select speed from 1~255 and 255 is the highest speed. c . D W E L L TI M E L ( S ) Select dwell time of the le ft position from 1~99 seconds. d. DWELL TIME R (S) Select dwell time of the ri ght position from 1~99 seconds e[...]

  • Page 49

    49 f. SET RIGHT POS. Press Enter key or turn the joystick Left/Right to enter SET RIGHT POS. menu. T urn the joystick to the position where you wish to set RIGHT position. Press IRIS+ key of keyboard to save setting and return to previous menu. (see diagram 3.19) (diagram 3.19) g. DEF AUL T ON: all settings in AUTOP AN menu will be returned to defa[...]

  • Page 50

    50 (diagram 3.20) a. T our NO.: T urn the joystick Left/Right to select tour number first. b. PRE: T urn the joystick Left/Right to se lect preset position. Press Enter key of keyboard to go next setting. Max. 16 positions can be set for a tour . c. DWELL: T urn the joystick Up/Down to set dwell time of the tour from 1~99 sec or default. d. SPEED: [...]

  • Page 51

    51 3.5.3. P A TT ERN Press Enter key of keyboard to enter P A TTERN sub-menu (see diagram 3.21) ( diagram 3.21) a. T urn the joystick Up or Down to select pa ttern number . b. T urn the joystick Left or Right to select action mode, either PLA Y or SET . c. Select SET and press Enter key of keyboard. (diagram 3.22) d. T urn the joystick to re cord t[...]

  • Page 52

    52 e. When you return to P A TTERN SETUP menu, turn the joystick Left/Right to PLA Y . Press Enter key of keyboard. The camera starts to run the p attern tour you set. The camera keep s playing the pattern until you press IRIS- to cancel playing and it will return to P A TTERN SETUP menu. (diagram 3.23) f. RETURN: T urn joystick Left/Right to retur[...]

  • Page 53

    53 3.5.6. POWER UP FUNC T urn the joystick Left or Right to select the mode to return to when power failure occurs. It is selectable from PREV MODE, POS.1 (H), TOUR1, P A T .1, AUTOP AN and OFF 3.5.7. AUTO FLIP Select ON to enable Auto Flip function or select OFF to disable Auto Flip. 3.5.8. EXIT Exit from the current menu. 3.6. ALARM In main menu,[...]

  • Page 54

    54 number from 1 ~4. b. T ype: Select Normal Close (NC) , Norma l Open (NO), NIGHT NC, NIGHT NO, or OFF for alarm type. NC: Enable a normal close alarm input. NO: Enable a normal open alarm input. NIGHT NC: Set camera at night mode with norma l close alarm input. When there is event triggered, the camera will be changed to day mode. NIGHT NO: Set c[...]

  • Page 55

    55 joystick Left/Right to select on Pattern and press Enter key to select pattern number . T urn joystick Left/Right to make selection. It is select able from1~4. Press Enter key again to confirm selection. TOUR: When the alarm is triggered, speed dome will run the tour . T urn the joystick Left or Right to select on T our and press Ente r key to s[...]

  • Page 56

    56 3.6.2. ALARM OUTPUTS Press Enter key of keyboard to enter AL ARM OUTPUTS sub-menu. (see diagram 3.26) (diagram 3.26) a. OUTPUT NUM: Select Output number from 1~2. b. INPUT1: Select YES to enable Alarm input 1 for the alarm output selected. Select NO to disable Alarm input 1. c. INPUT2: Select YES to enable Alarm input 2 for the alarm output sele[...]

  • Page 57

    57 Select NO to disable this function. i. RETURN: RETURN to the previous menu. 3.6.3. EXIT Exit from the current menu.[...]

  • Page 58

    58 3.7. SYSTEM In main menu, turn joystick Up/Down to select SYSTEM. Turn joysti ck Left/Right to enter SYSTEM sub-menu (see diagram 3.27) (diagram 3.27) a. AUTO INIT : Select auto initiation time from OFF , DAIL Y , WEEKL Y . S peed dome will automatically initiate and retu rn to the previous position by maintaining all the settings you have done.[...]

  • Page 59

    59 P ASSWORD ACTIVE: Select YES to activate passwor d mode. Select NO to disable password mode. ENTER P ASSWORD: Enter the password VERIFY P ASSWORD: Enter the password again to confirm your input. Press IRIS+ key to save and return to pr evious menu. Press IRIS- key to cancel. d. SA VE AND RETURN: Turn joystick Lef t/Ri ght to save the changes and[...]

  • Page 60

    60 d. RS-485-ID: shows RS-485 ID of this speed dome e. PRESET -CNT : Preset count er . This counter count s the preset movement, and 1 is counted when the speed dome runs to preset position. f. X-CONT : X-axis count er . This counter c ount s the x axis movement, and 1 is counted when the speed dome pans 360°. g. Y -CONT : Y -axis counter . This c[...]

  • Page 61

    61 4. EPTZ2700/2700I FUNCTION SETUP AND OPERA TION 4.1. Manual Control Mode ¾ Manual control: Shift Joystick Up/Down/Lef t/Right, and turn it Clockwise/Counterclockwise to control speed dome. Use the control keys which are Zoom, Focus and IRIS function keys on the keyboard to Zoom In/Out, focus N (near)/F (Far), or IRIS +/-. Note: Zoom In/Out cont[...]

  • Page 62

    62 4.3. Position Setting ¾ Focus on a preset position: Press the number key , and then press Position to focus on the number of preset position; or you can press Position, then enter the preset position number , and then press Enter to focus on the number of preset position. ¾ Preset a position: Shift the Joystick to the p ositi on you would like[...]

  • Page 63

    63 setting dwell time of A pos or B pos. 99 => Auto scan (360 degree) Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting speed). We can even set camera’ s ICR Day/Night function with RS-485 command via keyboard. How to do this? Press Position + 88 to link to Day mode or Position + 89 to link to Night mode, “ICR AUT[...]

  • Page 64

    64 T o preset a tour before running is necessary . Preset a one-way tour: Press Set + T our to preset a one-way tour . The system will ask you to enter preset pos ition numbers (The positions need to be preset). After finish entering all positions , press S top to quit, and then press Enter to save the tour . ¾ T o-and-fro tour mode: Press Shift +[...]

  • Page 65

    65 a frame scan. ¾ Delete an alarm link: P r e s s Clr + F1 to delete a link of alarm to position/tour . Note 1: After alarm output signal is termi nated, the speed dome will resume action or return to it s original position. Note 2: After powering on the speed dome, it will detect alarm status automatically . 4.6. Other Operations The EPTZ2700/EP[...]

  • Page 66

    66 P/N: MW01G02300 EverFocus Electronics Corp. Head Office: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chih, T aipei, T aiwan TEL: +886-2-26982334 F AX: +886-2-26982380 www .everfocus.com.tw USA L.A. Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 F AX: +1-626-844-8838 www .everfocus.com USA N.Y . Office: 415 Oser Av[...]