Fisher PLC-XU47 manual

Multimedia Pr oject or MODEL PLC-XU41 PLC-XU47 PLC-XU48 Owner ’ s Manual[...]

2 F eatures and Design ◆ Compact Design This projector is designed compact in size and weight. It is easy to carry and work anywhere you wish to use. ◆ Compatibility The projector widely accepts various video and computer input signals including; Computers, 6 Color systems, Component video, S-video and RGB scart. ◆ Simple Computer S ystem Set[...]

3 T able of Contents F eat ur es and Design . . . . . . . . . . . . . . . . . . .2 T able of Contents . . . . . . . . . . . . . . . . . . . . . .3 To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .4 Saf ety Instructions . . . . . . . . . . . . . . . . . . . .5 Air Circulation 6 Installing the Projector in Proper Position 6 Moving the Pr[...]

4 To the Owner CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE [...]

5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m[...]

6 Safety Instructions USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR –D o not drop or bump a projector, otherwise damages or malfunctions may result. – When carrying a projector, use a suitable carrying case. – Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to[...]

7 AC Po wer Cord f or the Unit ed Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the plug with the [...]

8 Bot t om Bac k Fr ont q Power Cord Connector w Infrared Remote Receiver e Projection Lens r Lens Cover (See page 46 for attaching.) t Air Intake Vent y Top Controls and Indicators u Focus Ring i Zoom Ring o Air Intake Vent !0 Terminals and Connectors !1 Speaker !2 Lamp Cover !3 Air Intake Vent (back and bottom) !4 Air Filter !5 Adjustable Feet q [...]

9 Pa rt Names and Functions A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively. q COMPUTER IN 1/ COMPONENT IN Connect output signal from a computer (Analog[...]

10 Pa rt Names and Functions ON - OFF POWER KEYSTONE INPUT W ARNING LAMP REPLACE MENU V O L U M E – V O L U M E + SELECT q w e r t y o i u u LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. (p48) y WARNING indicator Lights red when the projector detects abnormal condition. This also blinks red when the int[...]

11 Pa rt Names and Functions Pa rt Names and Functions P - TIMER FREEZE C OMPUTER OMPUTER VIDEO P AGE SELECT D.ZOOM MUTE VOLUME - MENU N O SHOW IMAGE VOLUME + KE Y S TONE AUT O P C ON - OFF[...]

12 Pa rt Names and Functions Remot e Contr ol Bat tery Installation To ensure safe operation, please observe the following precautions : – Use (2) AAA, SUM-4 or R03 type alkaline batteries. – Replace two batteries at the same time. – Do not use a new battery with a used battery. – Avoid contact with water or liquid. – Do not expose the re[...]

13 Installation Projection angle can be adjusted up to 11.8 degrees with the adjustable feet. Lift the front of the projector and pull upward the feet lock latches on both sides of the projector. 1 Adjustable Feet Feet Lock Latches Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and ti[...]

14 NO TE ON THE POWER CORD AC power cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer. Installation To power cord connector on your projector. Pr oject or side AC o[...]

15 Installation Installation Connecting t o a Comput er COMPUTER IN 1 DVI - I MONITOR OUT S-VIDEO COMPUTER IN 2 / COMPONENT IN / COMPUTER / COMPONENT AUDIO IN AUDIO IN R VIDEO L USB SERVICE PORT RESET (MONO) ARIALE) AUD[...]

16 COMPUTER IN 1 DVI - I MONITOR OUT S-VIDEO COMPUTER IN 2 / COMPONENT IN / COMPUTER / COMPONENT AUDIO IN AUDIO IN R VIDEO L USB SERVICE PORT RESET (MONO) (VARIABLE) AUDIO OUT COMPUTER IN 1 MONITOR OUT S-VIDEO COMPUTER / COMPONENT AUDIO IN AUDIO IN R VIDEO L USB SERVICE PORT RESET (MONO) / COMPONENT IN COMPUTER IN 2 / AUDIO OUT (VARIABLE) Installat[...]

17 Installation Installation Connecting t o Component V ideo Equipment[...]

18 Connect the projector's AC power cord into an AC outlet. The POWER indicator blinks red in a moment and lights red. Press the POWER ON-OFF button on the top control or on the remote control. The POWER indicator turns green lighting and the cooling fans start to operate. The preparation display appears on the screen and the count down starts[...]

19 Basic Operation Basic Operation Press the POWER ON-OFF button on the top control or on the remote control, and a message "Power off?" appears on the screen. Press the POWER ON-OFF button again to turn off the projector. The POWER indicator starts to blink red, and it continues while the cooling fans are operating for about 90 seconds. [...]

P - TIMER FREEZE C OMPUTER VIDEO P AGE SELECT D.ZOOM MUTE VOLUME - MENU MENU N O SHOW SHOW IMAGE VOLUME + KE Y S TONE AUTO P C ON - OFF CXPK 20 Basic Operation ON - OFF POWER K EYSTONE INPUT W ARNING LAMP REPLACE MENU V O L U M E – V O L U M E + SELECT Top Control Menu bar Pointer (red frame) Menu icon Item data Press the Point 7 8 buttons to adj[...]

21 Basic Operation Basic Operation Menu Bar PC System Menu Used to select computer system. (p25) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Sharpness / Gamma] (p30) Setting Menu Used to change settings of the projector or reset lamp replace counter. (p39-44) Sound Menu Used to adj[...]

22 Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. (p11) If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment. Basic Operation • The arrows are white when there is no correction. • The [...]

23 Basic Operation Basic Operation Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo item in the Setting Menu (p40), the screen changes each time you press the NO SHOW button as fo[...]

24 Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the [...]

25 Computer Input Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon displays the system being selected. The systems on this dialog box can be selected. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 buttons to move the red frame pointer to the PC Sy[...]

26 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows. Move the red frame pointer to the Auto PC Adj. icon and press the SELECT button. PC Adjust Menu PC Adjust Menu icon To store adjustment[...]

27 Computer Input Computer Input Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you[...]

28 Computer Input Select the resolution at the Display area dialog box. Display area Adjusts the horizontal area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SELECT button. Display area H Adjusts the vertical area displayed by this projector. Press the Point 7 8 button to decrease/increase va[...]

29 Computer Input Computer Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d button to move the red frame pointer to the level that you want to set and then press the SELECT button. Move the red frame pointer to the level and [...]

30 Computer Input Press the Point 7 8 button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d button to move the red frame pointer to the item that you want to adjust, and then press the SELECT button. The level of[...]

31 Computer Input Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. When the Digital zoom + is selected, the On-Screen Menu disappears an[...]

32 Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu[...]

33 Video Input Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. 1 Press the Point d button to move the red arrow pointer to Computer 1, and then press the SELECT button. The Source Select Menu will appear. 2 Move the pointer to the correct input so[...]

34 Video Input AV System Menu (Video or S-Video) AV System Menu (Component) Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the AV System Menu icon. Press the Point d button to move the red arrow pointer to the system that you want to select and then press the SELECT button. 1 2 [...]

35 Video Input Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d button to move the red frame pointer to the level that you want to set and then press the SELECT button. The level being selected. Image Select Menu Normal[...]

36 Video Input Press the Point 7 8 button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d button to move the red frame pointer to the item that you want to adjust and then press the SELECT button. The level of eac[...]

37 Video Input Video Input To store the adjustment data, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer to the Image Level 1 to 4 and then press the SELECT button. Image Level Menu Move the red frame pointer to an image icon to be set and then press the SELECT b[...]

38 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Screen Menu icon. Press the Point d button and move the red frame pointer to the function that you want t[...]

39 Keystone Press the MENU button to display the On-Screen Menu. Press the Point 7 8 button to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese. Display This function d[...]

40 Setting Capture This function enables you to capture the image being projected and use it for a starting-up display or interval of presentations. After capturing the projected image, go to the Logo function and set it to “User”. Then the captured image can be displayed when turning on the projector next time or pressing the NO SHOW button. ([...]

41 Setting Power management Time left until Lamp off Press the SELECT button at Power management and this box appears. Choose one of three settings with the Point 7 8 button, and go to the timer with the Point ed button and set time with the Point 7 8 button. Power management Terminal For reducing power consumption as well as maintaining the lamp l[...]

42 Setting Remote control This projector provides two different remote control codes; the factory-set, initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in “Code 2”, both the proje[...]

43 Setting PIN code lock This function prevents the projector from being operated by an unauthorized person and provides the following settings for security options. Off ...............the projector is unlocked with the PIN code. On1 .............requires to enter the PIN code every time turning on the projector. On2 ...........requires to enter th[...]

44 Setting This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 49 for operation. Lamp counter reset Factory default This function returns all setting values except for the user logo, PIN code lock, logo PIN code lock and the lamp counter to the [...]

45 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. W ARNING LAMP REPLACE L ECT V O L U M E + WARNING blinking red TOP CONTROL Wa r n i ng Indicator The projector is shut down and the WARNING indicator is blinking red. Whe[...]

46 Maintenance and Cleaning Air Filter Pull up and remove. Turn off the projector, and disconnect the AC power cord from the AC outlet. Turn the projector upside down and remove the air filters by pulling the latches upward. 1 2 Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air fi[...]

47 Maintenance and Cleaning Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Cleaning the Pr oject or Cabinet Disconnect the AC power cord before cleaning. 1 Softly wipe the projector body with a soft, dry cleaning cloth. When it is heavily[...]

48 Maintenance and Cleaning When the life of the projection lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the lamp with a new one promptly. Follow these steps to replace the lamp. Lamp Lamp Cover ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. W[...]

49 Maintenance and Cleaning Maintenance and Cleaning Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP REPLACE indicator stops lighting. Move the pointer to Lamp counter reset and then press the SELECT button. The message “Lamp replace counter Reset?” is displayed. Turn the pr[...]

50 Tr oubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer" and “Connecting to Video Equipment” on page15–17. – Make sure all equipment is connected to AC[...]

51 Appendix This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix W ARNING : High voltag es are used t o oper ate this pr ojector . Do not at t empt t o open the cabinet. If problem[...]

52 Appendix Check the indicators to see the projector condition. • • • lights green. • • • lights red. • • • off • • • blinks green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset[...]

53 Appendix Appendix Menu T ree System (1) MODE 1 MODE 2 SVGA 1 - - - - Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area Display area - H Display area - V Full screen Reset Mode free Store Quit Standard Real Blackboard(Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color Temp Red Green Blue Gam[...]

54 Appendix Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Standard Cinema Blackboard(Green) Image 1 Image 2 Image 3 Quit Normal Wide 0 - 63 0 - 63 0 - 63 0 - 63 Off Set ting Language Image Select System (2) System (3) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store [...]

55 Appendix Appendix Compatible Comput er Specifications 0Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 130 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. These modes are not available on PLC-XU41 / PLC-XU47. ON-SCREEN DISPLAY RESOLUTION H-Freq. ([...]

56 Appendix Te c hnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 11.73" x 2.8" x 8.39" (298mm x 71mm x 213mm) (Not including adjustable feet) Net Weight 6.0 lbs (2.7kgs) Feet Adjustment 0˚ to 11.8˚ Panel Resolution LCD Panel System 0.8" TFT Active Matrix type, 3 panels P[...]

57 Appendix Appendix Accessories Owner's Manual AC Power Cord Remote Control and Batteries VGA Cable Lens Cover with String and Screw PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fractio n of [...]

58 Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration SERVICE PORT CONNECTOR R X D ----- ----- GND RTS / CTS T X D GND GND Serial 1 2 3 4 5 6 7 8 Appendix COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red (R/Cr) Input / Output Ground (Horiz.sync.) Green (G/Y) Input [...]

59 Appendix Appendix Pixelworks ICs used. Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo PIN Code Loc k No . Log o PIN Code Loc k No . Factory default set No: 1 2 3 4* Factory default set[...]

Printed in Japan Part No. 610 324 9087 (1AA6P1P4571-A KD6A) SANYO Electric Co., Ltd.[...]