English dropdown-ico

FOCUS Enhancements FS-2E manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of FOCUS Enhancements FS-2E, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of FOCUS Enhancements FS-2E one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of FOCUS Enhancements FS-2E. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of FOCUS Enhancements FS-2E should contain:
- informations concerning technical data of FOCUS Enhancements FS-2E
- name of the manufacturer and a year of construction of the FOCUS Enhancements FS-2E item
- rules of operation, control and maintenance of the FOCUS Enhancements FS-2E item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of FOCUS Enhancements FS-2E alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of FOCUS Enhancements FS-2E, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the FOCUS Enhancements service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of FOCUS Enhancements FS-2E.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the FOCUS Enhancements FS-2E item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    FS-2/2E S tudio DTE Disk Recorder User Guide MANL-0927-04[...]

  • Page 2

    Symbols On the FS-2/2E Unit The lightning flash with arrowhe ad symbol, within an equilate ral triangle, is intended to alert the user to the presence of an uninsulated Da ngerous V oltag e within the product’ s enclosure that may be of sufficient ma gnitude to cons titute a risk of ele ctric shock to persons. Caution For continued protection aga[...]

  • Page 3

    FS-2/2E S tudio DTE Disk Recorder User Guide iii Notices: Legal, Regulatory , and Safety LEGAL NOTICES THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF FOCUS ENHANCEMENTS AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE OR DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE. R[...]

  • Page 4

    FS-2/2E S tudio DTE Disk Reco rder Us er Guide iv Cont acting FOCUS ENHANCEMENTS Serial N umber The serial number for this equipment is located on the bottom of the unit. Please write this serial number on the enclosed warranty card and keep it in a secure area. Registering Product s, T ec hnical Support, and W arranty To register a Focus Enhanceme[...]

  • Page 5

    FS-2/2E S tudio DTE Disk Recorder User Guide v Unauthorized Servicing Do not attempt to service this prod uct yourself. Opening or removing covers may expose dangerous voltage or other hazards. Refer all servicing to qual ified service personnel. Returning Materials End Users If the FS-2/2E was not purchase d direct ly fro m Focus Enhancements, it [...]

  • Page 6

    FS-2/2E S tudio DTE Disk Reco rder Us er Guide vi Regulatory and Safety Environment al Precaution FCC Class A This product satisfies FCC regulat ions when shielded cables and connectors a re used to connect the unit to other eq uipment. To prevent el ectromagne tic interference with electric a ppliances such as radios and televisions, use shielded [...]

  • Page 7

    FS-2/2E S tudio DTE Disk Recorder User Guide vii Document ation This manual is written with the assumption th at the user is familiar with a nalog and digital video/audio signals and hardware. Read, Retain, and Follow Instructions All the safety and operatin g instructions should be read before the product is operated. • Ret ain Documentation Pla[...]

  • Page 8

    FS-2/2E S tudio DTE Disk Reco rder Us er Guide viii Electrical Precautions Do Not Expose to Moisture Do not use this product near water or in an environmen t where it is exposed to dampness or there is the possibility of it getting wet. Do Not Remove Cover There are No User Serviceable Parts inside this unit. Serv icing should be done by qualified [...]

  • Page 9

    FS-2/2E S tudio DTE Disk Recorder User Guide ix Grounding or Polarization • Polarized If this product is equipped with a polarized alternating current lin e plug (a plug having one blade wider th an the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into th e outlet, try re v[...]

  • Page 10

    FS-2/2E S tudio DTE Disk Reco rder Us er Guide x When installing an outside antenna syst em, extreme care should be taken to keep from touching su ch power lines or circuits as contac t with them might be fatal. Optical Precaution The use of optical instrument s with this device will incr ease hazards to the eyes hazard. Maintenance and Moving Clea[...]

  • Page 11

    FS-2/2E S tudio DTE Disk Recorder User Guide xi Safety Check Upon completion of any service or repa irs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Operating Environment Location Install this device on a sturdy, level surface, away from moisture and dust. • H[...]

  • Page 12

    FS-2/2E S tudio DTE Disk Reco rder Us er Guide xii W ARRANTY For customers within the USA an d Canada, FOCUS ENHANCEMENTS, Inc. warrants this product against defects in materials or work manship as follows: For a period of TWO years from the da te of purchase, FOCUS ENHANCEMENTS, Inc. will repa ir or replace t he unit, at ou r option, without charg[...]

  • Page 13

    FS-2/2E S tudio DTE Disk Recorder User Guide xiii[...]

  • Page 14

    FS-2/2E S tudio DTE Disk Reco rder Us er Guide xiv[...]

  • Page 15

    FS-2/2E S tudio DTE Disk Recorder, User Guide xv T able of Content s Chapter 1 Introduction 1 What is a DTE Disk Recorder? 2 What is the FS-2/2E? 2 Basic Applications 3 Receiving, Unpacking, and Insp ecting 3 Package Contents 4 Installation and Site Requirements 5 Mounting in a 19” Electronics Ra ck 6 Connecting Hard Drives 7 Inserting the Intern[...]

  • Page 16

    FS-2/2E S tudio DTE Disk Reco rder, User Guide xvi SDI Serial Digital Video Source Input Key 21 DV Video Source Input Key 22 LCD Menu Sof t Keys 22 T ranspor t Control Keys 23 MENU 23 Back Index 23 Forward Index 24 St o p 24 Play 24 lRecord Key 24 SHIFT 24 Back Search 24 Forward Search 25 LCD Display 26 FS-2/2E Menus and Functions 30 Menu Item s 32[...]

  • Page 17

    FS-2/2E S tudio DTE Dis k Recorder, User Guide xvii Setup Menu 52 Set Date & Time 53 OS Version # 54 OS Upgrade 55 Copy Software to FS-2/2E Internal Drive 55 Load Software from External Driv e 56 Restoring the Factory Default Operating System 57 PAL/NTSC 57 RS422 Remote 58 Audio Input 59 Audio In Levels 60 TC Mode 60 TC Set 62 TC Preset 62 UB P[...]

  • Page 18

    FS-2/2E S tudio DTE Disk Reco rder, User Guide xviii Chapter 3 Using the FS-2/2E85 How to Make a Recording 86 How to Playback 86 How to Put Recorded Clip s on a Computer System 87 Mounting FireWire Disk Drives (Wind ows XP , 2000, 98SE and ME) 88 Using FS-2/2E Recorded Avid OMF Clips on Avid Edi ting Systems 90 Dismounting FireWire Disk Drives (Win[...]

  • Page 19

    [...]

  • Page 20

    [...]

  • Page 21

    FS-2/2E Studio DTE Disk Recorder User Guide 1 Chapter 1 Introduction Thank you for purchasing the Focus Enh ancements FS-2/2E DTE DV Studio Disk Recorder. The FS-2/2E is designed for use as a record or playback device in studios, mobile vans and other in stallations. The purpose of this User Guide is to expl ain the features and operation of the F [...]

  • Page 22

    Introduction FS-2/2E Stud io DTE Disk Recorder User Guide 2 1.1 What is a DTE Disk Recorder? A DTE Disk Recorder is a device that allo ws you to record or playback DV video directly to/from a removable IDE disk dr ive or removable FireWire dis k drives. The FS-2/2E features analog and digital inputs and outputs including DV25, SDI, composite, compo[...]

  • Page 23

    FS-2/2E Studio DTE Disk Recorder User Guide 3 Introduction • Record and recall a single frame of DV video and record us er definable time- lapse sequences. • Use trick playback mode s up to 30X/-30X fast-forward an d rewind speeds, reverse play, loop clip and loop entire disk. • Control the FS-2/2E remotely using in dustry standard RS42 2 (So[...]

  • Page 24

    Introduction FS-2/2E Stud io DTE Disk Recorder User Guide 4 1.4.1 Package Content s Please take a moment to study the contents of your FS- 2/2E package. You should have the following contents: 1. One (1) FS-2/2E unit with a ttached rack mounting ears 2. One (1) 120GB IDE disk drive in caddy 3. One (1) User Guide 4. One (1) 6-pin to 6-pin FireWire c[...]

  • Page 25

    FS-2/2E Studio DTE Disk Recorder User Guide 5 Introduction 1.5 Inst a llation and Site Requirement s Focus Enhancements recommends that FS-2/2E unit s be installed in a restricted access area, su ch as an equ ipment room or closet and the insta llation be performed by trained installers. The units are designed and te sted to operate reliably betwee[...]

  • Page 26

    Introduction FS-2/2E Stud io DTE Disk Recorder User Guide 6 1.6 Mounting in a 19 inch Electronics Rack The FS-2/2E m easures 15.89” h igh x 17.3 6” wide by 3.47” dee p. It is an 2 RU chassis featuring front rack mount ears to be installed into a standard 19” a udio/visual rack. There must be room behind the unit for th e attachment of cable[...]

  • Page 27

    FS-2/2E Studio DTE Disk Recorder User Guide 7 Introduction 1.7 Connecting Hard Drives 1.7.1 Inserting the Internal 3.5 inch IDE Drive Insert the internal 3.5 inch IDE drive as follows: 1. Remove the driv e from its packa ging. 2. Slide the drive carefully into the bay until it is seated firmly. 3. Press the Lock Handle flush with the chassis fa ce [...]

  • Page 28

    Introduction FS-2/2E Stud io DTE Disk Recorder User Guide 8 1.8 Physical Features The FS-2/2E features two main s urfaces, the front control panel and the rear connector panel. 1.8.1 Front Control Panel The front control panel cont ains the seven control areas, as shown in the illustration below and described in this section: • Power Switch and P[...]

  • Page 29

    FS-2/2E Studio DTE Disk Recorder User Guide 9 Introduction Input selections are either Composite , Y/ C (S-V ideo) , Component , SDI or DV . An audio source must be selected for each input using t he SETUP > AUDIO INPUT menu, the Timecode mode in the SETUP > TC MODE menu, and t he reference video source in the SETUP > GENLOCK > SOURCE m[...]

  • Page 30

    Introduction FS-2/2E Stud io DTE Disk Recorder User Guide 10 1.8.2 Rear Connection Panel The FS-2/2E rear panel, shown below, contains control and audio/video input/output areas described in this section. You can select any of the available inputs as a s ource. When selected, that s o u r c e i s w h a t i s r e c o r d e d t o d i s k . I f t h e [...]

  • Page 31

    FS-2/2E Studio DTE Disk Recorder User Guide 11 Introduction 8. Pr Input - For connecting the Pr s ignal from component input sources. Pr Output - For output of the Pr signal to component devices 9. Sync Input - For conn ecting the Sync signal on non sy nc on green component sources. Sync Output - For connecting the Syn c signal to non sync on green[...]

  • Page 32

    Introduction FS-2/2E Stud io DTE Disk Recorder User Guide 12 1.9 Setting Up the FS-2/2E This section explains how to set up the FS -2/2E for use. Refer to the illustration below and perform the steps on the following page. External V TR Record Output Camcorder Video Source Monitor Display Output Speakers Audio Output Playback VTR Vide o Source FS-2[...]

  • Page 33

    FS-2/2E Studio DTE Disk Recorder User Guide 13 Introduction To set up the FS-2/2E, do the following: 1. Plug in the power cord. 2. Connect a Video input device. 3. Connect an Audio source (if desired). 4. Connect a Monitor i f desired. 5. Connect Speakers or Headset (to monitor the audio) if desire d. 6. Connect a Tape Drive if desired. 7. Connect [...]

  • Page 34

    Introduction FS-2/2E Stud io DTE Disk Recorder User Guide 14 1.9.2 Setting the Time and Date Before using the FS-2/2E, use this procedure to set the time and date. 1. Select the Setup Menu. 2. Select SET DA TE & TIME . The following screen appears. 3. Select SET DA TE or SET TIME and press SEL to open the sub menu as shown below. 4. Scroll from[...]

  • Page 35

    FS-2/2E Studio DTE Disk Recorder User Guide 15 Introduction 1.10 Replacing the Power Module Fuse The power module of the FS-2/2 E contains a protective fuse. To replace the fuse do the follow ing: 1. Turn off the FS-2/2E. 2. Locate the power m odule on the rear of the unit. It is indicated as AC In . 3. Detach the power cord from the power module. [...]

  • Page 36

    FS-2/2E Stud io DTE Disk Recorder User Guide 16[...]

  • Page 37

    FS-2/2E Studio DTE Disk Recorder User Guide 17 Chapter 2 FS-2/2E Functions This chapter conta ins the following sections: Edit/Utility/Inpu t Buttons page 17 LCD Menu So ft Keys page 22 T ransport Control Keys page 23 LCD Display page 26 FS-2/2E Menus and Functions page 30 2.1 Edit/Utility/Input Buttons To the right of the hard disk drive is a bank[...]

  • Page 38

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 18 2.1.1 Edit Function Keys 2.1.1.1 MARK IN - Mark In Key Use the MARK IN key to mark a particular frame as a starting point when creating a clip for a playlist. Refer to Playlist Menu on page 44 of this user guide for mo re information about Playlist s. 2.1.1.2 MARK OUT - Mark Out Key [...]

  • Page 39

    FS-2/2E Studio DTE Disk Recorder User Guide 19 FS-2/2E Functions 2.1.1.5 FOL DER - Folde r Key By pressing the Folder key during a recording, you can mark each clip into particular pre-named fold ers on disk (up to 10 folders can be prenamed). Default names for th e folders a re 0 through 9. Refer to How to Mark Scenes on page 95 of this user guide[...]

  • Page 40

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 20 2.1.2 Utility Function Keys 2.1.2.1 OS D - (On Scree n Display ) Press this ke y to enable on scr e en display on the monitor output (composite). When off, the key will not light. 2.1.2.2 HDD – Hard Disk Drive Bypass Key Press this ke y to i mmediately open the HDD Bypass confirm s[...]

  • Page 41

    FS-2/2E Studio DTE Disk Recorder User Guide 21 FS-2/2E Functions 2.1.3 Input Source Selection Keys In all cases, when selected, the key lights. When selecting CMPST , Y/C , or CMPNT and there is no video source available, thi s light flashes several times and then the FS-2/2E returns to th e original input selection. Switching is not seamless. You [...]

  • Page 42

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 22 2.1.3.4 SDI Serial Digital Video Source Input Key Press this ke y to select SDI video ( SMPTE 259M ) as the input source. The default audio link is embedde d AES/EB U digita l audio in the stream. You ca n also select either balanced a nalog audio or separate AES/EBU audio as the in [...]

  • Page 43

    FS-2/2E Studio DTE Disk Recorder User Guide 23 FS-2/2E Functions 2.3 T ransport Control Keys This set of buttons con trols playback an d record functions of the FS-2/2E. These functions include play, revers e play, fast forward, fast rewind, forward frame, back frame, next track, previous t rack, stop, and record. This area also fe atures hot keys [...]

  • Page 44

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 24 2.3.3  | Forward Index Press this key to skip forwar d to th e next sequential clip for playback. • To skip ahead 10 clips per increment , holding down Forward Index . • To select the next disk drive, press SHIFT and then Forward In dex . 2.3.4  Stop Press this key to St[...]

  • Page 45

    FS-2/2E Studio DTE Disk Recorder User Guide 25 FS-2/2E Functions 2.3.9  Forward Search Press the Forwa rd Search key to play video at different speeds (both slower and faster than real-time). For instance, if you are in 10X FF speed and you press the Back Search button once, you are in 2X FF mode. Th is also applies to backward search speeds.[...]

  • Page 46

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 26 2.4 LCD Display The FS-2/2E LCD screen displays different FS-2/2E modes and states. On boot up, the FS-2/2E displays the following screen: Depending on the connected disk drive, the FS-2/2E may or may not display Please W ait during boot up. Once booted, if no disk drive is conne cte[...]

  • Page 47

    FS-2/2E Studio DTE Disk Recorder User Guide 27 FS-2/2E Functions Once ready for use, the FS-2/2E defa ult men u screen appears as follows: 1. Play/Record S t atus Symbol This symbol displays a graphical repres entation of the cu rrent FS-2/2E state as follows:  - STOP  ,  - Play or Reverse play  - Fast Forward search and speed [...]

  • Page 48

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 28 5. T rack or Clip Number The track numb er is displaye d in the top right corner of the LCD Display. This is the current clip or track number being recorded or played back. For example, a display value of 2-01 4 identifies a track as being clip 14 on volume 2. 6. Ti mecode/User Bit D[...]

  • Page 49

    FS-2/2E Studio DTE Disk Recorder User Guide 29 FS-2/2E Functions 8. Current Disk V olume Displays the current disk volume in relation to available s pace. 9. A vailable Space on V olume Displays the space in time availabl e on the current volume, for example, • DISK 1 183min - Current Disk time rem aining is 183 minutes •N O D I S K - No attach[...]

  • Page 50

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 30 2.5 FS-2/2E Menus and Functions The FS-2/2E features a comprehe nsive menu system which allows a n umber of features to be initiated a nd setup. The menu sy stem contains the followin g selections: • RECORD MODE •N O R M A L R E C • RETRO DISK • RETRO CACHE • LOOP RECORD ?[...]

  • Page 51

    FS-2/2E Studio DTE Disk Recorder User Guide 31 FS-2/2E Functions •A V I D O M F • PINNACLE • 24P A VI TYPE 2 (for FS-2E, or FS-2 with 2.0 upgrade only) • 24P QUICKTIME (for FS-2E, or FS-2 with 2.0 upgrade only) • SETUP • SET DA TE & TIME (sub-menus include SET DA TE, SET TIME ) • OS VERSION NO • OS UPGRADE • PA L / N T S C (se[...]

  • Page 52

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 32 • NETWORK SETUP • IP SETTINGS (selections include DHCP , CUSTOM IP ) • USER/P ASSWORD • VIEW IP INFO • SERVICES (selections include FTP [ENABLE/DISABLE] , TELNET [ENABLE/DISABLE] , WEB [ENABLE/DISABLE] ) • GENLOCK (selections include SOURCE [REF VIDEO/FREERUN] , SC PHASE [...]

  • Page 53

    FS-2/2E Studio DTE Disk Recorder User Guide 33 FS-2/2E Functions 2.5.2 Sub-Menu A vailable The  symbol at the en d of a line indicates a menu item that has a sub- menu available. Press the SEL soft key, to display the sub-menu. 2.5.3 Sof t Keys • EXIT -- Press EXIT to return to the FS-2/2E main menu screen. • SEL -- Press SEL to select the c[...]

  • Page 54

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 34 Press STOP once to pause your record ing. To st op the recording session entirely, press STOP once again. Use th e REC button to restart the recording. 2.5.4.2 Re tro Disk RETRO DISK Record const antly buffers video in a loop to a determined amount of space on th e hard-disk drive so[...]

  • Page 55

    FS-2/2E Studio DTE Disk Recorder User Guide 35 FS-2/2E Functions Due to larger files sizes, the maximum amount of drive s pace available is decreased to accommo date the last recording in a session. For instance, if you have 90 m inutes of disk space remaining, after you set RETRO record to less tha n 60 minutes, the available space chan ges to 88 [...]

  • Page 56

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 36 2.5.4.3 Retro Cache RETRO CACHE Record constantly caches your video in a loop up to a 10 second data buffer. In this way, when the record is begun, a retro time period is added to the beginning of any clip. Pressing the REC key when in RETRO CACHE mode puts the FS- 2/2E into a RETRO [...]

  • Page 57

    FS-2/2E Studio DTE Disk Recorder User Guide 37 FS-2/2E Functions When the disk capacity’s record time is reached, an additional one-minute (or 2GB) seg ment is created. After this clip is complete, the oldest one-minute clip (or 2GB segment) is recorded over, followed by each se quential oldest clip. When you press STOP during a record session, r[...]

  • Page 58

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 38 2.5.5 Control Mode Menu 1. Select the Control mode. The highlighted mode is the current mode after exit. 2. Press EXIT to return to the menu screen. Control Mode has the following functions: •L O C A L •R E M O T E •A V / C • SYNCRO SLA VE 2.5.5.1 L ocal Select these opti ons[...]

  • Page 59

    FS-2/2E Studio DTE Disk Recorder User Guide 39 FS-2/2E Functions • Index at Scene - In this mode, recordin gs are contin uous until a sc ene break is detected in the incoming vide o stream, or the nine minute file size lim it is reached. At that time, a new file is automatically crea ted within one second of the scene change. No frames are lost d[...]

  • Page 60

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 40 2.5.5.3 A V/C Use these settings in PLA YBACK and other situation s where the FS-2/2E is controlled by an extern al FireWire device (such as a DV NLE system). There three option s in this sub-m enu: • Normal Mode - default - In this mode, recordings are captured to a single base fi[...]

  • Page 61

    FS-2/2E Studio DTE Disk Recorder User Guide 41 FS-2/2E Functions 2.5.5.4 Syncro Slave The FS-2E and the FS-2 (with the 2. 0 upgrade), has two settings in Syncro Slave: • NEW FILE - default - This setting , and the FS-2E is triggered to stop recording from the ca mcorder, the current fi le is closed and a new file is opened ready for the next reco[...]

  • Page 62

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 42 2.5.6 Play Mode Menu 1. Select the mode. The highlighted mode is the current mode aft er exit. 2. Press EXIT to return to the menu screen. The default mode is PLA Y CLIP . 2.5.6.1 P lay Clip For this function, the FS-2/2E plays the selected clip from start to finish when you press th[...]

  • Page 63

    FS-2/2E Studio DTE Disk Recorder User Guide 43 FS-2/2E Functions 2.5.7 Play From Mode Menu This selection allows you to select th e playback list used in play mode. There are three options available. 1. Select the mode. The highlighted mode is the current mode aft er exit. 2. Press SEL for the highlighted menu item to open the sub-menu. When you ex[...]

  • Page 64

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 44 2.5.8 Playlist Menu The Playlist menu options are: • OPEN • SA VE • NEW •E D I T • VIEW • DELETE The FS-2/2E playlist feature allows you to playback clips in a custom, user- defined order. Playlists are created using the FS-2/2E front panel. You can mark in and out play p[...]

  • Page 65

    FS-2/2E Studio DTE Disk Recorder User Guide 45 FS-2/2E Functions 2.5.8.1 Op en Open allows you to open a playlist on disk. Do this as follows: 1. In the PLA YLIST menu, select the OPEN option. A display similar to the following appears. 2. Once the sub menu is opened, select the desired playlist from the list. A screen similar to the following appe[...]

  • Page 66

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 46 2.5.8.2 Sa ve When a playlist has been create d or modified, use the SAVE option to write it to disk. If you modify a playlist, upon ex iting, the SAVE fu nction automatically appears. If you have made modifications an d wish to save them as a new playlist, modify the file name prior[...]

  • Page 67

    FS-2/2E Studio DTE Disk Recorder User Guide 47 FS-2/2E Functions 2.5.8.4.1 REMOVE a Clip To remove a clip, use the following steps: 1. Select EDIT from the PLA YLIST menu and then REMOVE CLIP . You are given a list of clips in the open playlist. (If no clips are in the playlist, the message PLA YLIST EMPTY appears.) 2. Select the clip you wish to r[...]

  • Page 68

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 48 3. Select between inserting at the BEGIN, END or CUSTOM (user-specified) part of playlist. Once you have selected your choice, the updated playlist is displayed. 2.5.8.4.3 MOVE a Clip The MOVE CLIP option allows you to move a clip within an existing playlist. To move a clip, use the [...]

  • Page 69

    FS-2/2E Studio DTE Disk Recorder User Guide 49 FS-2/2E Functions 2.5.8.5 View The VIEW option allows you to vi ew the track information of an OPEN playlist. A play list must be opened in order to view. 1. Select VIEW from the PLA YLIST > EDIT menu. 2. Scroll to the desired clip, then select NEXT . The clip information is displayed. 2.5.8.6 Delet[...]

  • Page 70

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 50 2.5.9 HDD Byp a ss HDD Bypass mode allows the connecte d FireWire hard drives to be mounted or dismounted to a computer without removing the m from the FS-2E. In this mode, the computer connects to the “HDD I/O” port on the FS-2/2 E Rear Connector P anel. 1. To Exit this mode, pr[...]

  • Page 71

    FS-2/2E Studio DTE Disk Recorder User Guide 51 FS-2/2E Functions 2.5.1 1 Record Format Menu The RECORD FORMAT menu allows selection of particular DTE Technology native NLE file formats prio r to recording. All files are in the DV25 standard. • The FS-2E supports th e RAW DV formats: • AV I T Y P E 1 • AV I T Y P E 2 • CANOPUS A VI • MA TR[...]

  • Page 72

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 52 2.5.12 Setup Menu The SETUP menu allows y ou to set various funct ions of the FS-2/2E. • Select the menu item. •P r e s s SEL to open the sub menu (where applicable). •U s e  to scroll through the selections. •P r e s s EXIT to return to the menu scre en. The SETUP menu co[...]

  • Page 73

    FS-2/2E Studio DTE Disk Recorder User Guide 53 FS-2/2E Functions 2.5.12.1 Set Date & Time This selection provides a way to se t date and time for file naming purposes. Date and Time are s et in different menus. 1. Select the menu item. 2. Press SEL to open one of the following sub menus. 3. Move from field to field using the FOR W ARD and BACK [...]

  • Page 74

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 54 On a computer, files are identified by their base file name made up of DATE and TIME. For instance, a clip named 2005061 5- 210943-01.mov is a clip that began recording at 9:09:43PM on June 15th. 2005. 2.5.12.2 OS V ersio n # This selection displays the cu rrent FS-2/2E Operating Sys[...]

  • Page 75

    FS-2/2E Studio DTE Disk Recorder User Guide 55 FS-2/2E Functions 2.5.12.3 OS Upgr ade To upgrade operating system (OS) software, you must download a new .bin file to a FireWire dr ive on y our computer. The latest version of FS-2/2E software can be downloaded from http:// www.focusinfo.com/support. There are three meth ods for installing new FS-2/2[...]

  • Page 76

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 56 5. Select YES . The following warning appears: 6. Select YES to begin the OS upgrade . 7. A message appears indicating the u pgrade has begun. 8. After upgrade is complete, power cycle the FS-2/ 2E, to reboot the system. The ne w software is now loaded and ready to use. 2.5.12.3.2 Lo[...]

  • Page 77

    FS-2/2E Studio DTE Disk Recorder User Guide 57 FS-2/2E Functions 2.5.12.4 Restoring the Factory Default Op erating System To restore the factory de fault Operatin g System hold down the Lef t and Middle soft keys located under the LCD during boot up. 2.5.12.5 P AL/NTSC Use this screen to select the re cord standard as either PAL or NTSC. The highli[...]

  • Page 78

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 58 2.5.12.6 RS422 Remote This submenu allows you to setup the FS-2/2E for remote operation using the RS422 control port. For easy integration w ith existing control systems, you can make the FS-2/2E look like either a So ny BVW-75 Betacam SP deck or a generic re corder. Using th e TC SO[...]

  • Page 79

    FS-2/2E Studio DTE Disk Recorder User Guide 59 FS-2/2E Functions 2.5.12.7 Audio Input In this submenu, you can change the default audio input l inked to a particular video input. Select the mo de to activa te it. 1. Press SEL for the highlighted menu item to open the sub- menu. In the sub-menu, the cu rrently highligh ted mode is the current mode a[...]

  • Page 80

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 60 2.5.12.8 Audio In Levels This menu item allows you to se t the audio input levels for FS-2/ 2E. Adjust the audio leve l betwee n -34.5dB and +4.5dB in 1.5dB increments. 2.5.12.9 TC Mod e This submenu allows you to select different timecode options for use when the FS-2/2E is recordin[...]

  • Page 81

    FS-2/2E Studio DTE Disk Recorder User Guide 61 FS-2/2E Functions This submenu contains the following selections: • EXT TC - Whatever the inc oming timecode, the FS-2/2E records it. You can select between SELECTED INPUT and LT C . Select the desired TC source: • Choosing EXT TC mode will clear any stored timecode value. • REC RUN - In this mod[...]

  • Page 82

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 62 2.5.12.10 TC Set This menu allows you to set Timecode values for various modes. It also allows the selection of dr op or non-drop frame (NTSC only) settings. Once a timecode value is set a nd the FS-2/2E is set to REC RUN or FREE RUN timecode settings, the TC preset value becomes the[...]

  • Page 83

    FS-2/2E Studio DTE Disk Recorder User Guide 63 FS-2/2E Functions 3. Press EXIT to return to the menu screen. 2.5.12.10.2 UB Preset 2.5.12.10.3 TC Delay (FS-2E only) The TC DELAY menu is only available for the FS-2E, or FS-2 (with the 2.0 upgrade ). This menu allows you to delay the reco rded timecode up to 29 frames. TC DELAY: 00 1. Use  (middle[...]

  • Page 84

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 64 2.5.12.1 1 On Screen Display This selection allows you to turn on or off the on-screen display on FS-2/2E's Monitor Output. The highlighted item is saved after exit. When you select ABS, the absolute timecode value, or amount of time recorded to the disk, appears on the bottom c[...]

  • Page 85

    FS-2/2E Studio DTE Disk Recorder User Guide 65 FS-2/2E Functions • The highlighted mode is th e current mode after exit. •P r e s s EXIT to return to the menu scre en. 2.5.12.13 GPI Port This menu allows you to change the set ting of the GPI port. • The highlighted function is the current setting after exit. •P r e s s EXIT to return to the[...]

  • Page 86

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 66 2.5.12.1 4 Backligh t This selection enables or disa bles the FS-2/2 E LCD backlight. • The highlighted state is saved after exit. •P r e s s EXIT to return to the menu scre en. The ON setting leaves the LCD backlight on continuously and OFF setting turns it off. AUTO OFF turns o[...]

  • Page 87

    FS-2/2E Studio DTE Disk Recorder User Guide 67 FS-2/2E Functions • CUSTOM - The FS-2/2E looks on disk drive vo lume 1 for any clip named SPLASH.dv and always displays the first frame of that clip. You can name any RawDV clip Splash.dv and the first frame from that clip appe ars as the default ou tput in STOP mode. 2.5.12.16 Audio Correct This sub[...]

  • Page 88

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 68 2.5.12.1 7 Preferen ces This menu allows you to save and restore system preferences. When you select SA VE , you a re prompted with the messa ge SA VE CURRENT PREFERENCES? . Pre ss YES and a file is written to the disk drive savin g the curr ent user settings. When you select RESTORE[...]

  • Page 89

    FS-2/2E Studio DTE Disk Recorder User Guide 69 FS-2/2E Functions 2.5.12.18 Folder Pref The FOLDER PREF menu allows you to determine the folders to which your clips are moved when you choose to do a ORGANIZE CLIPS from the UTILITIES me nu. This menu contains the following sections: • SCENE MARK - default - only marks th ose clips you expl icitly m[...]

  • Page 90

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 70 2.5.12.20 Network Setup With NETWORK SETUP , you can connec t the FS-2/2E to a network. When this is done, you can do FTP file transfers to or from the FS-2/2 E or control the FS-2/2E using Telnet. The FS-2E, or FS-2, with the 2.0 software upgrade also allows you to control the FS-2 [...]

  • Page 91

    FS-2/2E Studio DTE Disk Recorder User Guide 71 FS-2/2E Functions • CustomIP - If you select CUSTOM IP, a submenu opens to ask you to enter an IP number, Sub Net Mask , and Gateway . If you do not have these values, contact your sy stem administrator. The default values for the IP address are 000.000. 000.000, Sub Net Mask 255.255.2 55.000 and Gat[...]

  • Page 92

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 72 2.5.12.20.2 USER/P ASSWORD This screen allows you t o set a username a nd password for the FS-2/2E. If you are unsure what username and password t o use, contact your s ystem administrator. • Username may have up to 4 characters. • Pas sword may have up to 6 characters. To modify[...]

  • Page 93

    FS-2/2E Studio DTE Disk Recorder User Guide 73 FS-2/2E Functions 2.5.12.20.3 VIEW IP INFO In cases where DHCP is being used, by selecting VIEW IP INFO , you can see the IP addre ss that the network has provided the FS-2/2E. If the FS-2/2E is not connected to a network or was not able to successfully log on, this screen displays DHCP DISABLED NOT CO[...]

  • Page 94

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 74 Web Interf ace Use the web in terface to cont rol, change sett ings, edit playlists, and even delete tracks on the FS-2/2E. Below is an exam ple of the web interface. For m ore information about the web interface, see FS-2E Web Interface on page 99. Remote Use of HDD Bypass HDD Bypas[...]

  • Page 95

    FS-2/2E Studio DTE Disk Recorder User Guide 75 FS-2/2E Functions 2. Connect a host c omputer to the TO C O M P UT E R port on the back of the FS-2E next to the EtherNet port. 2.5.12.2 1 GENLOC K The GENLOCK menu allows you to select and adjust th e reference video source and whether the video out will be locked to the reference video input in playb[...]

  • Page 96

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 76 2.5.12.22 Video Out Adj The VIDEO OUT ADJ menu options allow you to make adjustments to FS-2/2E analog output sources. • HUE (NTSC composite only) - ad justable between -179 and +180 • SA TURA TION (composite out only)- ad justable between -255 and +256 • BRIGHTNESS (composite [...]

  • Page 97

    FS-2/2E Studio DTE Disk Recorder User Guide 77 FS-2/2E Functions 2.5.13 Utilities Menu This menu allows you t o access various utilities. • Select the menu item. Press SEL to open the sub menu (where applicable). •P r e s s EXIT to return to the menu scre en. This menu contains the following selections: • ORGANI ZE PINN • ORGANI ZE CLIP •[...]

  • Page 98

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 78 Once clips have been imported into Liquid Edition, an Index file is created on the disk drive per clip. Do not delete this file since it is required to continue work in the part icular project. The illustration below shows this.[...]

  • Page 99

    FS-2/2E Studio DTE Disk Recorder User Guide 79 FS-2/2E Functions 2.5.13.2 Organi ze Clip This selection places all files that were identified as a KEEPER or were SCENE MARKED du ring recording into a folder marked KEEPER or the prenamed SCENE MARKING folders on the disk drive. These folders can be import ed directly into most DV NLE bins. 2.5.13.3 [...]

  • Page 100

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 80 2.5.13.4 Delete Cl ip • In the DELETE CLIP X-XXX screen , select betw een clips by pressing the  and  buttons. •I f y o u s e l e c t YES , a m essage appears indicating th at the selected clip is being deleted. •P r e s s EXIT to return to the menu scre en. Once a [...]

  • Page 101

    FS-2/2E Studio DTE Disk Recorder User Guide 81 FS-2/2E Functions 2. Select the volume and press YES , the following screen appears: 3. When you select YES , a message indica ting the formatting appears. 4. Press EXIT to return to the menu screen. 2.5.13.6 Part ition 1. Go to Utilities and select Partition . 2. The display shown ab ove appears. 3. P[...]

  • Page 102

    FS-2/2E Functions FS-2/2E Stud io DTE Disk Recorder User Guide 82 4. Press Ye s . The following messa ge appears. Select Partition to partition a connected disk drive. When an unknown volume type (HDD) is connected to the FS-2/2E, the Partition process puts a FAT32 format ont o the drive. It erases any previous partition and data. 2.5.13.7 Repair 1[...]

  • Page 103

    FS-2/2E Studio DTE Disk Recorder User Guide 83 FS-2/2E Functions 2.5.13.7.2 CURRENT CLIP This selection performs a similar function, but on the selected cl ip only. If an error is found, the FS-2/2E prompts you to repair the problem. CURRENT CLIP repairs the la st file in the current session if it has been d amaged. • Select between volumes by pr[...]

  • Page 104

    FS-2/2E Stud io DTE Disk Recorder User Guide 84[...]

  • Page 105

    FS-2/2E Studio DTE Disk Recorder User Guide 85 Chapter 3 Using the FS-2/2E This chapter contains the following procedures: How to Make a Recording page 86 How to Playback page 86 How to Put Recorded Clip s on a Computer System page 87 How to Create a Playlist page 94 How to Mark Scenes page 95 Connecting the FS-2/2E to a Network page 98 To perform [...]

  • Page 106

    Using the FS-2/2E FS-2/2E Stud io DTE Disk Recorder User Guide 86 3.1 How to Make a Recording 1. Use the following procedure to ma ke a recording using the FS-2/2E. 2. Make sure th e FS-2/2E i s connecte d to power and has been turned on usin g the power switch on the rear of t he chassis. 3. Connect the required devices as explained in Chapt er 1.[...]

  • Page 107

    FS-2/2E Studio DTE Disk Recorder User Guide 87 Using the FS-2/2E 3.3 How to Put Recorded C lip s on a Computer System Once you have recorded clip s to a FireWi re disk drive using FS-2/2E, you can use those clips in most computer based D V NLE systems. Traditionally, in order to get footage in to an NLE system, it was necessary to capture or digiti[...]

  • Page 108

    Using the FS-2/2E FS-2/2E Stud io DTE Disk Recorder User Guide 88 3.3.1 Mounting FireWire Disk Dr ives (Windows XP , 2000, 98SE and ME) 1. On a Windows-based computer system, double click the My Co m p u t e r ic o n o n t h e t op l e f t h a n d c o r n e r o f t h e d e s k t op . Y o u w i l l se e a window similar to the following: 2. Locate y[...]

  • Page 109

    FS-2/2E Studio DTE Disk Recorder User Guide 89 Using the FS-2/2E The FireWire disk drive can contain seve ral di fferent files. Clips can appear as •R a w D V ( . d v ) • AVI Type 1 ( YYYYMMDDHHMMSSa01 ) • AVI Type 2 or 24p AVI Type 2 ( YYYYMMDDHHMMSSb01 ) • Canopus AVI ( YYYYMMDD-HHMMSSb01 ) •M a t r o x A V I ( YYYYMMDD-HHMMSSm01 with a[...]

  • Page 110

    Using the FS-2/2E FS-2/2E Stud io DTE Disk Recorder User Guide 90 3.3.2 Using FS-2/2E Recorded A v id OMF Clips on A vid Editing Systems The Avid DV OMF file format was de veloped for use with Avid editing systems on Windows 2 000, Windows XP or Mac 0S10. Thes e include Avid Xpress Pro, NewsCutter, Media Composer Adrenaline, and Symphony (with the [...]

  • Page 111

    FS-2/2E Studio DTE Disk Recorder User Guide 91 Using the FS-2/2E 3. Drag all the OMF and AI F files into the new folder (do not drag in the files titled Desktop DB or Deskt op DF ). 4. Launch Avid. 5. Once you have opened the desired project or created a new project, select T ools > Media T ool . The following window appears: 6. Locate and selec[...]

  • Page 112

    Using the FS-2/2E FS-2/2E Stud io DTE Disk Recorder User Guide 92 3.3.3 Dismounting FireWire Disk Dr ives (W indows XP , 2000, 98SE and ME) Once you have completed working with your disk drive on a Windows XP, Windows 2000, Windows 98SE or Wi ndows ME computer system, you must dismount the drive before unplugg ing it. To do this, use the following [...]

  • Page 113

    FS-2/2E Studio DTE Disk Recorder User Guide 93 Using the FS-2/2E When mounted, your FireWire di sk dr ive should appear on the computer's desktop as shown below: The FS-2/2E formatted disk drive a ppears as a FAT32 volu me with a PC label. 3. Once you have located your FireWire disk drive on the desktop, double click the di sk icon to open it [...]

  • Page 114

    Using the FS-2/2E FS-2/2E Stud io DTE Disk Recorder User Guide 94 3.4 How to Create a Playlist Use the following procedure to create a simple playlist on the FS-2/2E. 1. Ensure no playlist is open. 2. TO ADD A CLIP - Play a clip you wish to add to the playlist. Using the front panel buttons, press MARK IN and MARK OUT for the particular portion of [...]

  • Page 115

    FS-2/2E Studio DTE Disk Recorder User Guide 95 Using the FS-2/2E 3.5 How to Mark Scenes The FS-2/2E Scene Marking feature allows you to mark clips for placement in particular folders during r ecording, playback or stop mode. When a drive is formatted using FS-2/2E, ten folder s are created numbere d 0 through 9. After the drive is formatted on FS- [...]

  • Page 116

    Using the FS-2/2E FS-2/2E Stud io DTE Disk Recorder User Guide 96 3.5.1 Marking Scenes Use the following procedu re: 1. Play your pre-recorded clip from the FS-2/2E. 2. When you encount er the start of yo ur scene, pause the FS-2/2E and then press the MARK IN button. The MA RK IN button should lig ht up. 3. Play your clip again to the e nd point an[...]

  • Page 117

    FS-2/2E Studio DTE Disk Recorder User Guide 97 Using the FS-2/2E If the FS-2/2E PLA Y FROM is set to TRACKLIST the name of the SCENE MARK , or assigned, fol der appears wi thou t brackets on the LCD display (for example, 2 SCENE 2 ). If the PLA Y FROM menu is set to FOLDERS , the name of the assigned folder appears in brackets on th e LCD display ([...]

  • Page 118

    Using the FS-2/2E FS-2/2E Stud io DTE Disk Recorder User Guide 98 3.6 Connecting the FS-2/2E to a Network You can connect the FS-2/2E to a ne twork using the Ethernet 1 0/100 Base T port on the rear panel . Do the following: 1. Use a standard RJ85 cable t o connect between the Ethernet port on the rea r panel to a network . 2. Power up the FS-2/2E [...]

  • Page 119

    FS-2/2E Studio DTE Disk Recorder User Guide 99 Chapter 4 FS-2E W eb Interface The FS-2E may be con figured and operat ed over the network via the FS-2E Web Interface. This application provides func tions for recorder/player operations and a reduced set of system manage ment functions similar to those acce ssed through FS- 2E front panel controls, s[...]

  • Page 120

    FS-2E Web Inte rface FS-2/2E Stud io DTE Disk Recorder User Guide 100 4.1 Web Interface Home Page To open the Web Interface for a FS-2E, en ter the IP address of that FS-2E in the browser address window and press Enter . JA V A Sof tware for the Des ktop The Web Interface control functions requi re that the Java Runtime Environment be installed. Do[...]

  • Page 121

    FS-2/2E Studio DTE Disk Recorder User Guide 101 FS-2E W eb Interface 4.2 The W eb Interface 4.2.1 Recorder/Player Controls The Record and Play buttons function in the same manner as controls on a video tape recorder (VTR) and the cont rol panel buttons on the front of the FS-2E, see Front Contro l Panel on page 8 for more information. 4.2.1.1 Re co[...]

  • Page 122

    FS-2E Web Inte rface FS-2/2E Stud io DTE Disk Recorder User Guide 102 4.2.2 Recorder St atus The Recorder Status displays a log th at lists hard drive activity that includes: • User Password (at top of display), • IP information (at top of display), • File name and extension, • File type (format), • Number of frames in file, • Timecode,[...]

  • Page 123

    FS-2/2E Studio DTE Disk Recorder User Guide 103 FS-2E W eb Interface 4.2.3 T racklist The Tracklist, which is avai lable in both sets of tabs, is similar to a hard drive directory and displays the list of Tracks that may be used when creating playlist. Adding a track from th is lis t to a playlist does not remove the track from the Tracklis t. Like[...]

  • Page 124

    FS-2E Web Inte rface FS-2/2E Stud io DTE Disk Recorder User Guide 104 4.2.3.1 Adding T racks to a Playlist 1. To add multiple tracks to a playlist: • Select the tracks by placin g check marks in their check boxes. • Select the button Add to Playli st in the menu bar above the list of tracks. 2. To add a specific video clip within a track to a p[...]

  • Page 125

    FS-2/2E Studio DTE Disk Recorder User Guide 105 FS-2E W eb Interface 4.2.4 Recorder Configuration Use the Recor der Config form t o se t up the FS-2E recorder function. The FS-2E provides the foll owing Recording Settings: For specific details about the parameters listed below, see FS-2/2E Menus and Functions on page 30 and Using the FS-2/2 E on pa[...]

  • Page 126

    FS-2E Web Inte rface FS-2/2E Stud io DTE Disk Recorder User Guide 106 • Record Format : • Raw DV, • AVI Type 1, • AVI Type 2, • Canopus AVI, • Matrox AVI, • Quicktime, • Avid OMF, • Pinnacle, • 24P AVI Type 2, • 24P Quicktime, • Control Mode : • Local, default • Remote, • AVC, • Syncro Slave, • Audio Record Level :[...]

  • Page 127

    FS-2/2E Studio DTE Disk Recorder User Guide 107 FS-2E W eb Interface 4.2.5 Playlist The FS-2E provides the ability to create simple playlists. The Playli st tab displays a listing of selected tracks in the order they are to play. In the button bar above the list, there are three playlist administration tools: • Select All - Clicking this button s[...]

  • Page 128

    FS-2E Web Inte rface FS-2/2E Stud io DTE Disk Recorder User Guide 108 4.2.6 System Configuration FS-2E’s System Config form provides the ability to adjust system settings. When a system se tting is changed, the FS-2E immediately applies it and refreshes the System Config form. For more inform ation about these settings, see FS-2/2E Menus and Func[...]

  • Page 129

    FS-2/2E Studio DTE Disk Recorder User Guide 109 FS-2E W eb Interface 4.3 Up d ating FS-2E Sof tware via FTP Periodically check the Focus Enhancements web site for FS -2E software updates, go to http://www .focusinfo.com/support . Before uploading the software, verify the file name and determin e that th e FS-2E is enabled for FTP operations. 1. Unz[...]

  • Page 130

    FS-2E Web Inte rface FS-2/2E Stud io DTE Disk Recorder User Guide 11 0 5. If the FS-2/2E is configured f or an anonymous logon a dialogue window appears: Enter the Logon and Password : Factory default logon: fs2 . Factory default password: focus . Logon and password are case sensitive. It is not possible to change the logon or password through the [...]

  • Page 131

    FS-2/2E Studio DTE Disk Recorder User Guide 111 Chapter 5 Reference This chapter conta ins reference info rmation for the FS-2/2E as follows: T echnical S pecifications page 1 12 FS-2/2E LCD Display Modes page 1 14 Supported RS-422 Commands page 1 16 Shuttle Speed Parameters page 1 16 Jog Speed Parameters page 1 17 Custom Commands page 1 17[...]

  • Page 132

    Reference FS-2/2E Stud io DTE Disk Recorder User Guide 11 2 5.1 T echnical Specifications 5.1.1 Input s/Output s Input/Output s Component - Y , Pr , Pb (3 x BNC in, 3 x BNC out) SMPTE • 100% white at 700mv with 300mv Sync • 700mv Chroma levels (100% color bars) • Setup default to OFF • Chroma offset default to OFF Betacam • 100% white is [...]

  • Page 133

    FS-2/2E Studio DTE Disk Recorder User Guide 11 3 Reference 5.1.2 Control • GPI & RS-232C Control (1 x 3.5mm mini jack) • RS-422 (1 x DB9 Seria l) 5.1.3 Power • 110V to 220V AC, 50 - 60 Hz, Auto Ranging 100W •I E C P o w e r I n p u t 5.1.4 Physical S pecification • 18.41lbs (8.36kg) • 19" x 17.3" x 3.5" (483mm x 44 0m[...]

  • Page 134

    Reference FS-2/2E Stud io DTE Disk Recorder User Guide 11 4 5.1.6 DTE File Format s • FS-2 and FS-2E: RawDV (.dv), AVI Type 1, AVI Type 2, Canopus AVI and Matrox AVI (.avi), QuickTime (.mo v), Pinnacle (.avi) or Avid DV- OMF (.omf) • FS-2E (or FS-2 with 2.0 upgrade): 24P AVI Type 2, and 24P Quicktime. 5.1.7 Disk Information • Internal Disk Ty[...]

  • Page 135

    FS-2/2E Studio DTE Disk Recorder User Guide 11 5 Reference CONTROL TYPE LCD Display A V/C* (S top) A STOP A V/C* (Rec Pause) ll A <REC TYPE> REC A V/C* (Rec) A <REC TYPE> REC A V/C* (Play Pause) ll A PLA Y A V/C* (Play) A ALL Syncro Slave (Pause) ll Y <REC TYPE>REC Syncro Slave (Rec) Y <REC TYPE>REC * A V/C is only for use w[...]

  • Page 136

    Reference FS-2/2E Stud io DTE Disk Recorder User Guide 11 6 5.3 Supported RS-422 Commands 5.4 Shuttle Sp eed Parameters RS-422 Command Shuttle FWD 21, 13, Shuttle S peed Shuttle Rev 21, 23, Shuttle Sp eed Jog FWD 21, 1 1, Jog S peed Jog Rev 21, 21, Jog S peed S top 20, 00 Play 20, 01 Pause 21, 13, 0 Record 20, 02 Goto Timecode 24, 31, timecode Comm[...]

  • Page 137

    FS-2/2E Studio DTE Disk Recorder User Guide 11 7 Reference 5.5 Jog S peed Parameters 5.6 Custom Commands The following commands are currently su pported. Command Param eters Pause 0 S te p 1 Frame 1 to 200 Play Slow 4 201 to 300 Play Slow 3 301 to 400 Play Slow 2 401 to 500 Play Slow 1 501 to 800 Play Normal 1000 to 8999 Wa r n i n g s No feedback [...]

  • Page 138

    Reference FS-2/2E Stud io DTE Disk Recorder User Guide 11 8 Command Description 24 31 ## ## ## ## Goto T imeCode from start of track 48 80 82 2A # # 00 00 00 00 00 Goto Track ## (Note 0 = track #1) 48 80 82 06 ## 00 00 00 00 00 Delete T rack ## 48 80 82 0A 00 00 00 00 00 00 Reco rd Mode Normal 48 80 82 0A 01 00 00 00 00 00 Reco rd Mode retro disk 4[...]

  • Page 139

    FS-2/2E Studio DTE Disk Recorder User Guide 11 9 Reference Command Description 48 80 82 0F 05 00 00 00 00 00 Record Format QUICKT IME 48 80 82 0F 06 00 00 00 00 00 Record Format A VID OMF 48 80 82 0F 07 00 00 00 00 00 Record Format PINNACLE 48 80 82 0F 0B 00 00 00 00 00 Record Format A VI T YPE 2 - 24P 48 80 82 0F 0C 00 00 00 00 00 Record Format QU[...]

  • Page 140

    Reference FS-2/2E Stud io DTE Disk Recorder User Guide 120 Command Description 48 80 82 1D 04 00 00 00 00 00 Audio Rec Level -28.5 48 80 82 1D 05 00 00 00 00 00 Audio Rec Level -27.0 48 80 82 1D 06 00 00 00 00 00 Audio Rec Level -25.5 48 80 82 1D 07 00 00 00 00 00 Audio Rec Level -24.0 48 80 82 1D 08 00 00 00 00 00 Audio Rec Level -22.5 48 80 82 1D[...]

  • Page 141

    FS-2/2E S tudio DTE Disk Recorder User Guide index 1 Index A absolute timecode value 28 adding track to playlist 103 adding tracks to playlist 104 AES/EBU in put/output 11 air temperature 5 analog out 69, 108 applications 3 audio correction 67, 106 audio input levels 60, 106 audiometer 28 AV/C 40 available space indicator 29 Avid DV OMF file format[...]

  • Page 142

    Index FS-2/2E S tudio DTE Disk Reco rder Us er Guide index 2 file type 102 files organize 108 folder preferences 108 folder display 29 folder key 19 folder list 43 folder pref menu 69 format disk 80 formatting drives 13 forward index key 24 forward search key 25 FREE RUN Mode 61 front control panel 8 FTP 108, 109 fuse replacement 15 G genlock play [...]

  • Page 143

    FS-2/2E S tudio DTE Disk Recorder User Guide index 3 Index organize Pinn acle 77 OS upgrade 55 OSD 20, 108 P package contents 4 password 110 password/username 72 Pb input/output 10 phase H 108 SC 108 PINN 77 play all 42 play clip 42 play from mode menu 43 play key 24 play list 43 play mode menu 42 play/record status symbol 27 playback web interface[...]

  • Page 144

    Index FS-2/2E S tudio DTE Disk Reco rder Us er Guide index 4 Sync input/output 11 syncro record preference 106 syncro slave 41 still 37 system configuration 108 system preferences 68 T TC delay 63, 106 TC options 60 technical supp ort 1 Telnet 108 time and date setting 14 time lapse 37 timecode 102 timecode input/output 11 timecode mode 106 timecod[...]

  • Page 145

    [...]

  • Page 146

    FS-2/2E Studio DTE Disk Recorde r, User Guide MANL-0927-04[...]