Foxconn A74ML-K 3.0 manual

User ’ s Manual A74ML 3.0 Series Motherboard[...]

Statement: This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modied at any time, Foxconn does not obligate itself to inform the user of these changes. T rademark: All trademarks are the property of their respective owners. V ersion: User ’s Manual V1.0 for A74ML 3.0 Series mothe[...]

Declaration of conformity HON HAI PRECISION INDUSTRY COMP ANY L TD 66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT , T AIPEI HSIEN, T AIW AN, R.O.C. declares that the product Motherboard A74ML 3.0/A74ML-K 3.0 is in conformity with (reference to the specication under which conformity is declared in accordance with 89/336 EEC-EMC Directive) ■ [...]

Declaration of conformity T rade Name: FOXCONN Model Name: A74ML 3.0/A74ML-K 3.0 Responsible Party: PCE Industry Inc. Address: 458 E. Lambert Rd. Fullerton, CA 92835 T elephone: 714-738-8868 Facsimile: 714-738-8838 Equipment Classication: FCC Class B Subassembly T ype of Product: Motherboard Manufacturer: HON HAI PRECISION INDUSTRY COMP ANY L TD[...]

Installation Precautions Please carefully read the following procedures to install your computer : ■ It is suggested to select high-quality , certied fans in order to avoid damage to the motherboard and CPU due to high temperature. Never turn on the computer if the CPU fan is not properly installed. ■ We cannot guarantee that your system can[...]

T ABLE OF CONTENTS Chapter 1 Product Introduction Product Specications .............................................................................. 2 Layout....................................................................................................... 4 Back Panel Connectors .............................................................[...]

Congure ......................................................................................... 63 About & Help .................................................................................... 65 FOX LOGO ............................................................................................. 66 FOX DMI ...........................[...]

Thank you for buying Foxconn A74ML 3.0 Series motherboa rd. Foxconn products are engineered to maximize computing power, providing only what you need for break-through performance. With advanced overclocking capability and a range of connectivity featur es for toda y mult i-media compu ting require ments, A 74ML 3.0/A74ML-K 3.0 enables you to unlea[...]

1 2 1-1 Product Specications CPU Support AMD Phenom TM II, Athlon TM , Sempron TM , AM3 socket processors HyperT ransport 2000MT/s Chipset North Bridge: AMD RS740G South Bridge: AMD SB710 Memory 2 x 240-pin DDR3 DIMM sockets Support up to 8GB of system memory Dual cha nnel DDR 3 13 33/1 066/8 00MH z ar chit ectu re Audio VIA 6-channel audio chip[...]

1 3 6-channel Audio ports Hardware Monitor System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU/System fan speed control PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth Low power consumption and power management features P C I Ex p r e s s x 16 Support 4GB/s (8GB/s concurrent) bandwidth Low powe[...]

1 4 1-2 Layout 1. 4-pin A TX 12V Power Connector 2. SYS_F AN Header 3. North Bridge: AMD RS740G 4. PCI Express x1 Slot 5. PCI Express x16 Slot 6. PCI Slots 7. Front Audio Connector 8. CD_IN Connector 9. S/PDIF Out Connector 10. Speaker Connector 1 1. Front USB Connectors 12. Clear CMOS Jumper 13. Front Panel Connector 14. SA T A Connectors 15. Sout[...]

1 5 1-3 Back Panel Connectors 1. PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse. 2. PS/2 Keyboard Port Use the lower port (purple) to connect a PS/2 keyboard. 3. VGA Port T o connect with external display devices, such as monitor or LCD display . 4. DVI-D Port The DVI-D port supports DVI-D specication. Connect a monitor that [...]

1 6 7. RJ-45 LAN Port The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate. Link LED Active LED LAN T ype Left: Active Right: Link Status Description Status Description 100M Off No Link Off No Link Green Blinking Data Activity Orange 10/100Mb/s Connection 1000M Off No Link Off No Link Green Blinking Data Activity Of[...]

This chapter introduces the hardware installation process, including the installation of the CPU, memory , power supply , slots, pin headers and the mounting of jumpers. Caution should be exercised during the installation of these modules. Please refer to the motherboard layout prior to any installation and read the contents in this chapter careful[...]

2 8 2-1 Install the CPU and CPU Cooler Install the CPU Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket. Pin-1 triangle marking of CPU 1. Release the CPU socket lever . 2. A lign Pin-1 of the CPU with the CPU so cke t, a nd ge nt ly pu t t he C PU onto the socket. Read the following guidelines before you begin to install the CPU: [...]

2 9 3. W he n C P U i s p r op e rl y s e a te d , push the CPU socket lever back to its locked position. Install the CPU Cooler Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.) 1. Apply and spread an even thermal grease on the surface of CPU. 2. Buckle the heatsink rmly at[...]

2 10 2-2 Install the Memory Dual Channel Memory Conguration This motherboard provides two DDR3 memory sockets and supports Dual Channel T echnology . When memory is installed, the BIOS will automatically check the memory in your system. T wo DDR3 memory sockets are divided into two channels : Channel 0 : DIMM1 Channel 1 : DIMM2 The combinations [...]

2 1 1 Installing a Memory If you take a look at fron t sid e of mem ory modu le, it has asym metr ic pin coun ts on both sides sepa rate d by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install your memory modules into the sockets. Step 1: Spread the clips at both ends of the memory socket. Place[...]

2 12 2-3 Install an Expansion Card Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel. 2. Align the card with the slot, and press down on the card until it is fully seated in the slot. 3. Make sure the met[...]

2 13 2-4 Install other Internal Connectors Power Connectors This motherboard uses an A TX power supply . In order not to damage any device, make sure all the devices have been installed properly before applying the power supply . 24-pin A TX power connector : PWR1 PWR1 is the A TX power supply connector . Make sure that the power supply cable and p[...]

2 14 Front Panel Connector : FP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators. Hard Disk LED Connector (HDD-LED) Connect to the chassis front panel IDE indicator LED. It indicates the active status of the hard disks. This 2-pin connector is directional with +/- sign. Reset Switch (RESET -SW) Att a[...]

2 15 Audio Connector : F_AUDIO The audio connector supports HD Audio standard. It provides the Front Audio output choice. Audio Connector : CD_IN CD_IN is a Sony standard audio connector , it can be connected to a CD/DVD-ROM drive through a CD/DVD audio cable. S/PDIF Connector : SPDIF_OUT The connector is used for S/PDIF output. USB Connectors : F_[...]

2 16 Speaker Connector : SPEAKER The speaker connector is used to connect speaker of the chassis. Fan Connectors : CPU_F AN, SYS_F AN There are two main fan headers on this motherboard. The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup. These fans can be automatically turned off after the system enter[...]

2 17 2-5 Jumpers For some featur es neede d, user s can change the jumpe r setti ngs on this motherb oard to modif y them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting. Description of Jumpers 1. For [...]

Since BIOS could be updated some other times, the BIOS information described in this manual is for reference only . We do not guarantee the content of this manual will remain consistent with the newly released BIOS at any given time in the future. Please visit our website for updated manual if it is available. This chapter tells how to change syste[...]

3 19 Enter BIOS Setup The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer , when the message " Press <DEL> to enter Setup, <ESC> to boot menu ". appears at the bottom of the screen, you can press &[...]

3 20 ► Power Management Setup All the items related with Green function features can be set up through this menu. ► PC Health Status This setup enables you to read/change Fan speeds, and displays temperatures and voltages of your CPU/System. ► BIOS Security Features The Supervisor/User password can be set up through this menu to prevent unaut[...]

3 21 System Information This sub-menu is used to set up the standard BIOS features, such as the date, time, oppy drive and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the setting. AMIBIOS ► Date (mm:dd:yy) <weekday><month><date> <year> format. Day—weekday fro[...]

3 22 ► Mouse Th e s ys t em b o ot w i ll n o t st o p fo r a m o us e e rr or if y o u en a bl ed th is it em . ► Model Name Model name of this product. ► BIOS ID It displays the current BIOS ID/version. User can check this information and discuss with the eld service people if a BIOS upgrade is needed. ► CPU Name It displays the curren[...]

3 23 Advanced BIOS Features ► IDE Detect Time Out This item is used to select the time out value for detecting A T A/A T API devices. If the checking time is over the set value, the system will skip it. ► MPS Revision This feature is only applicable to multiprocessor motherboards as it species the version of the MPS that the motherboard will[...]

3 24 [Disabled] : Displays the normal POST messages. [Enabled] : Displays OEM customer logo instead of POST messages. ► Quick Boot While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the time needed to boot the system. ► Bootup Num-Lock This item denes if the keyboard Num Lock key is active when your[...]

3 25 Fox Central Control Unit ► Super BIOS Protect T o protect the system BIOS from virus attack, there is a BIOS write-protection mechanism provided. Super BIOS Protect function protects your BIOS from being affected by viruses, e.g. CIH. ► Smart BIOS / Fox Intelligent Stepping / V oltage Options / CPU Configuration Press <Enter> to go t[...]

3 26 Power-On Self-T est (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. Y ou can always leave this state enabled. ► Smart Boot Menu When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter smart boot menu. If [Disabled] is selected, then pr[...]

3 27 ► Spread Spectrum If you enabled this function, it can signicantly reduce the EMI (Electromagnetic Interference) generated by the system, so to comply with FCC regulation. But if overclocking is activated, you had better disable it. V oltage Options ► CPU V oltage Control This option is used to change the CPU voltage in a step of 25mV .[...]

3 28 CPU Conguration This menu shows most of the CPU specications. ► Cool ‘N‘ Quiet (Appear only when CPU supports) This option helps lowering down the CPU frequency and voltage when system is idling. When the CPU speed is slowing down, the temperature will drop as well. CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends,[...]

3 29 Advanced Chipset Features ► Memory Conguration/DRAM Timing Conguration Press <Enter> to go to its submenu. ► CAS Latency This item shows the CAS latency . The CAS Latency is the number of clock cycles that elapse from the time the request for data is sent to the actual memory location until the data is transmitted from the modu[...]

3 30 1. When using a non-A TI PCI Express (PCIe) graphics card, SurroundView is not supported. The integrated graphics processor (IGP) is automatically disabled, and the system memory allocated to the IGP is freed for other use. 2. When installing an A TI PCIe graphics card, SurroundView is disabled by default. Enabling SurroundView in the BIOS ena[...]

3 31 puts them at the top of the 32-bit address space. For many years it wasn't possible or practical to put that much RAM into a PC. But now it is, so it's up to the memory controller and host bridge to gure out what to do. Many systems cause that high RAM to simply be ignored, resulting in the loss of effective RAM. More complex syst[...]

3 32 DRAM Timing Conguration ► Memory Speed Mode This item is used to enable/disable provision of DRAM timing by SPD device. The Serial Presence Detect (SPD) device is a small EEPROM chip, mounted on a DDR2 memory module. It contains important information about the module's speed, size, addressing mode and various other parameters, so tha[...]

3 33 Integrated Peripherals CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Integrated Peripherals ► IDE Conguration [Press Enter] Help Item ► USB Conguration [Press Enter] ► SuperIO Conguration [Press Enter] Congure the IDE ► T rusted Computing [Press Enter] device(s). OnBoard LAN [Enabled] OnBoard LAN B[...]

3 34 IDE Conguration ► OnBoard PCI IDE Controller [Disabled]: Disable the integrated IDE controller . [Enabled]: Enable the integrated IDE controller . ► OnChip SA T A Channel [Disabled] : Disable SA T A controller. [Enabled] : Enable SA T A controller. ► OnChip SA T A T ype This item is used to set the operating mode of your SA T A ports.[...]

3 35 USB Conguration ► Legacy USB Support This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set to auto or enabled. ► USB 2.0 Controller Mode This item is used to set the transmission rate mode of USB 2.0. The available settings are : [High Speed] in 480Mb/s; [Full Speed] in 12Mb/s. ?[...]

3 36 SuperIO Conguration ► Serial Port 1 Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port . T rusted Computing ► TCG/TPM Support T rusted Computing Group (TCG) members develop and promote open, vendor-neutral, industry standard specications for trusted computing building blocks an[...]

3 37 TP M (T rusted Platform Module) is a specication promoted by TCG. A T rusted Platform Mod - ule offers facilities for secure generation of cryptographic keys. The TPM W ork Group is chartered to create the T rusted Platform Module (TPM) specica - tion. The denition of the TPM architecture comes from the TC and the TPM W ork Group de?[...]

3 38 Power Management Setup ACPI (Advanced Conguration and Power Interface) is an open industry standard interfaces enabling OS-directed conguration, power management, and thermal management of mobile, desktop, and server platforms. It denes ve sleeping states, they are : S1 - The S1 sleeping state is a low wake latency sleeping state. [...]

3 39 ► ACPI Suspend T ype This item is used to set the energy saving mode of the ACPI function. When you select “S1 (POS)” mode, the power is always on and computer can be resumed at any time. When you select “S3 (STR)” mode, the power will be down after a period of time. The status of the computer before it entering STR will be saved in [...]

3 40 PC Health Status ► W arning T emperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will send out warning information. ► Shut Down T emperature This item is used to set the system temperature upper limit. When the temperature exceeds the set v[...]

3 41 BIOS Security Features ► Change Supervisor Password This item is used to install or change supervisor password. After you input Supervisor password, it then will ask you to input user password optionally . If you have installed the supervisor password, the following items will appear: CMOS Setup Utility - Copyright (C) 1985-2006, American Me[...]

3 42 Load Optimal Defaults Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values. Select this option and press Enter , it will pop out a dialogue box to let you load the defaults. Select <OK> and then press <Enter> to load the defaults. Sele[...]

The util ity CD that cam e wit h the moth erbo ard con tain s use ful soft ware and several utility drivers that enhance the motherboard features. This chapter includes the following information: ■ Utility CD content ■ Install driver and utility ■ FOX ONE ■ FOX LiveUpdate ■ FOX LOGO ■ FOX DMI Note : Because each module is independent, s[...]

4 44 Utility CD content This mot herbo ard comes wit h one Utility CD. Y ou can simp ly put it into your CD/DVD- ROM d rive , and the main menu will be displayed on your PC screen to guide you how to install. 1. Install Driver Use these options to install all the drivers for your system. Y ou should install the drivers in order , and you need to re[...]

4 45 Install driver and utility 1. Install Driver Y ou must click "AMD Chipset Driver" to install it rst. After that, you can click "One Click Setup" to install all the other drivers left, or you can click on each individual driver to install it manually . 2. Install Utility Y ou can select the specic utility to install. M[...]

4 46 FOX ONE FOX ONE is a powerful utility for easily modifying system settings. It also allows users to monitor various temperature values, voltage values, frequencies and fan speeds at any time. With FOX ONE, you can : ■ Modify system performance settings, such as the CPU and memory bus speeds, CPU voltages, fan speeds, and other system perform[...]

4 47 1. Main Page T oolbar Use the toolbar to navigate to other pages. Alert Lamp When the system is in healthy state, the color of alert lamp is green. When the system is in abnormal state, the alert lamp color is red. Switch Button Click this button, it will simplify the whole FOX ONE control panel to a smaller information bar (i.e. Simple Mode) [...]

4 48 Skin Button There are more choices of FOX ONE screen panels. Click this button, you can select your favorite skin (FOX ONE Panel). Exit Click this button to exit the program. Minimum Click this button to drop the FOX ONE to Windows system tray located at the lower right corner of your screen. Homepage Click this button to visit Foxconn motherb[...]

4 49 Conguration This menu allows you to congure : 1). Monitor interval (ms) : This is to dene the interval of different messages of system settings which are to be displayed on Simple Mode screen. Minimum value is 1 second. 2). Simple Mode : T o select which message of system settings are to be displayed in the Simple Mode. Messages such [...]

4 50 Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Y es. Step 2 : After data is collected, it will ask you to restart your computer now . Later on, when the FOX ONE program is activated, and F .I.S. feature (in CPU Page) is also enabled, FOX ONE will automatically adjust your CPU clock according to your system load[...]

4 51 2. CPU Page - CPU Control (Optional) This page lets you select (or ) CPU clock to meet the current performance level of the system. The fastest and suitable CPU clock running for current system can be calculated by FOX ONE automatically or manually input by yourselves. Manual : Y ou can press the up/down button to adjust your CPU clock. Auto :[...]

4 52 Y ou can see the system is raising CPU clock until the system hangs. Push RESET button on the front panel of your system to restart the computer . Run FOX ONE program again, it will inform you the previous test found that 255MHz is the recommended CPU clock for your system. Click Y es to apply it to your system. Now , your system is running at[...]

4 53 FOX Intelligent Stepping (F .I.S., Optional) Select FOX Intelligent Stepping will allow your system to automatically adjust your CPU clock rate based on different system loadings. For example, if you select Power Gaming, CPU clock will be driven to run at its maximum speed. While in Energy Saving, CPU will lower down its speed to a minimum. Th[...]

4 54 4. Limit Setting 4.1 Limit Setting - CPU T emperature This page lets you to set CPU high limit temperature and enable the alert function. 4.2 Limit Setting - System T emperature This page lets you to set system high limit temperature and enable the alert function. Go to Limit Setting page Set high limit by dragging the lever Show current CPU t[...]

4 55 4.3 Limit Setting - CPU Fan This page lets you to set CPU fan low limit rpm and enable the alert function. 4.4 Limit Setting - System Fan This page lets you to set system fan low limit rpm and enable the alert function. Set low limit rpm by dragging the lever Show current CPU fan rpm value Enable alert function when the CPU fan runs slower tha[...]

4 56 4.5 Limit Setting - F AN1 Fan (Optional) This page lets you to set F AN1 fan low limit rpm and enable the alert function. 5. V oltage Page - V oltage Control (Optional) This page lets you set CPU voltage, memory voltage and North Bridge voltage manually . CPU voltage can be stepped up/down by a unit of 12.5mV , while memory is 0.05V/step, and [...]

4 57 6. Fan Page - Fan Control This page lets you enable Smart Fan function or set the fan speed by manual. When Smart Fan is selected, you must use a 4-pin CPU cooler in your system. Go to Fan page Set fan speed by dragging the lever Enable or disable smart fan function Apply the changes[...]

4 58 FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online. Supporting Operating Systems : ■ Windows 2000 ■ Windows XP (32-bit and 64-bit) ■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit) ■ Winows 7 (32-bit and 64-bit) Using FOX LiveUpdate : [...]

4 59 1-2 Local Update - Backup This page can backup your system BIOS. Y ou can click “Backup”, and key in a le name, then click “Save” to nish the backup operation. The extension of this backup le is ".BIN" for Award BIOS and ".ROM" for AMI BIOS. Default directory is "C:DesktopMy Documents" in Window[...]

4 60 2. Online Update 2-1 Online Update - Update BIOS This page lets you update your system BIOS from Internet. Click “start”, it will search the new BIOS from Internet. Then follow the wizard to nish the update operation. 2-2 Online Update - Update Driver This page lets you update your system drivers from Internet. Click “start”, it wil[...]

4 61 2-3 Online Update - Update Utility This page lets you update utilities from Internet. Click “start”, it will search the new utilities from Internet. Then follow the wizard to nish the update operation. Browse detailed information Install the selected driver Close the window Select the driver to update Click here Current information Sear[...]

4 62 2-4 Online Update - Update All This page lets you update your system drivers from Internet. Click “start”, it will search all new BIOS/drivers/utilities from Internet. Then follow the wizard to nish the update operation. Click here Current information Search all new BIOS/ drivers/utilities from Internet Browse detailed BIOS information [...]

4 63 3. Congure 3-1 Congure - option This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdate will start its searching from Internet and if any qualied item found, it will pop out a message on the task bar to inform you to do the next step. Double click on the icon as show below , you can see th[...]

4 64 When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older , it will auto search from internet and prompt you to install the new version. 3-2 Congure - System This page lets you set the backup BIOS location. Click here Set the location of download les or auto backup BIOS Determine if the FOX LiveUpdat[...]

4 65 3-3 Congure - Advance This page lets you select to ash BIOS / Boot Block and clear CMOS. If you choose Flash Boot Block, it means BIOS is not protective, and you must make sure the ash process is continuous and without any interruption. 4. About & Help This page shows some information about FOX LiveUpdate. Click here Select which [...]

4 66 FOX LOGO FOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo. The boot Logo is the image that appears on screen during POST (Power-On Self-T est). Y ou can prepare a JPG image (1024x768) le, then use FOX LOGO to open it and change the boot time Logo. Boot time Logo will be displayed if you enable the BIOS[...]

4 67 FOX DMI FOX DMI is a full Desktop Management Interface viewer , and it provides three DMI data formats : Report, Data Fields and Memory Dump. With DMI information, system maker can easily analyze and troubleshoot your motherboard if there is any problem occurred. Supporting Operating Systems : ■ Windows 2000 ■ Windows XP (32-bit and 64-bit[...]

This chapter will cover two topics : ■ Creating a Bootable Array - Installing a new Windows XP (or Vista) in a brand new RAID system. ■ Creating a Non-Bootable Array - Existing Windows XP (or Vista) system with new RAID built as data storage. It includes the following information : ■ RAID Conguration Introduction ■ FastBuild Driver ■ C[...]

5 69 Creating a Bootable Array - Installing a new Windows XP (or Vista) in a brand new RAID system. 1. Follow 5-1 to create a RAID driver diskette. 2. Follow 5-2 to set RAID enabled in BIOS. 3. Follow 5-3 to select a RAID array for use. 4. Follow 5-4 to Install a new Windows Operating System. What kinds of hardware and software you need here : 1. A[...]

5 70 RAID Conguration Introduction RAID (Redundant Array of Independent Disks) is a method for computer data storage schemes that divide and/or replicate data among multiple hard drives. RAID can be designed to provide increased data reliability (fault tolerance) or increased I/O (input/ output) performance, or both. The following RAID congur[...]

5 71 RAID 0 (Striped) RAID 0 reads and writes sectors of data interleaved among multiple drives. If any disk member fails, it affects the entire array . The disk array data capacity is equal to the number of drive members times the capacity of the smallest member . RAID 0 does not support fault tolerance. RAID 1 (Mirror) RAID 1 writes duplicate dat[...]

5 72 FastBuild Driver The FastBuild driver supports RAID 0 ,RAID 1 and RAID10 functions. It allows you to get high performance with fault tolerance, big capacity , or data safety provided by different RAID functions. Here, we will use four SA T A hard disks as an example to guide you through how to congure your RAID system. Assume four hard disk[...]

5 73 T wo topics will be covered in the following sections : 1). Creating a Bootable Array - Installing a new Windows XP in a brand new RAID system. 2). Creating a Non-Bootable Array - Existing Windows XP system with new RAID built as data storage. Install SA T A Hard Disks before we continue : ■ Shut down your computer . ■ Install SA T A hard [...]

5 74 1. Find a PC, put a diskette into its oppy drive A:, this diskette will be formatted later . Put the driver CD into DVD-ROM drive. 2. Depending on which platform your system is, normally , it is a 32-bit XP system. Use Windows explorer , and go to CD:Driver AMDRAIDFloppyWinXP , click on Raid- T ool icon to start the creation. 3. Click[...]

5 75 6. Y ou can input a volume label for this diskette, click on "Start" to format. 7. Click on "OK" to go through this warning mes- sage. 8. Format nished. Click "OK" to continue copying of RAID driver into this diskette. 9. Check if the diskette contains the driver les.[...]

5 76 5-2 RAID Enable in BIOS 1. Enter the BIOS setup by pressing <DEL> key when boot up. 2. Select the “Integrated Peripherals” from the “Main menu”, then select the “IDE Conguration” menu and press <Enter> to go to the conguration items. 3. Enable RAID function and individual SA T A port for hard drive or DVD connecti[...]

5 77 Create RAID 0 (Striped) Here, we will show you how to create two RAID 0 Logical Drives (LD) by using two hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears. 2. Press [Enter], the screen appears as below . 3. Use [↓] key to select the hard disks, press [Space] key to change its assignment status to "Y"[...]

5 78 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. Another screen prompts. Press [Ctrl-Y]. Input 80GB to select the rst logical drive (LD1) and press [Enter]. 7. The selection of LD1 array is completed. As we want to introduce how to create two logical drives by using the same two hard drives here, so we will press [↓] to s[...]

5 79 8. When LD2 is selected, press [Enter] to continue. 9. Y ou can see in the previous example, about 40GB of Channel 1 and 2 hard disks were allocated. Select the remaining spaces from them for RAID0 again. Press [Ctrl-Y] to save the setting. [ Dene LD Menu ] LD No RAID Mode T otal Drv Capacity(GB) Status LD 1 RAID 0 2 79.99 Functional LD 2 ?[...]

5 80 10. A message prompts. Press [Ctrl-Y] to erase the RAID array . 1 1. The remaining disk spaces are assigned to LD2. The size is about 42GB*2 = 84GB. [ Dene LD Menu ] LD No RAID Mode T otal Drv Capacity(GB) Status LD 1 RAID 0 2 79.99 Functional LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−?[...]

5 81 Create RAID 1 (Mirrored) Here, we will show you how to create one Mirrored Logical Drives (LD) by using two hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears. 2. Press [Enter], the screen appears as below . 3. Use [↓] key to select the hard disks, press [Space] key to change its assignment status to "Y&qu[...]

5 82 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. Another screen prompts. Press any key to use the maximum capacity . 7. The selection of LD1 array is completed. The nal capacity of 249.99GB (250GB) is the smaller size of the two hard drives. [ Dene LD Menu ] LD No RAID Mode T otal Drv Capacity(GB) Status LD 1 RAID 0 2 16[...]

5 83 Create RAID 10 (Striped Mirror) Here, we will show you how to create one Striped Mirror Logical Drives (LD) by using four hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears. 2. Press [Enter], the screen appears as below . 3. Use [↓] key to select the hard disks, press [Space] key to change its assignment status[...]

5 84 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. Another screen prompts. Press any key to use the maximum capacity . 7. The selection of LD1 array is completed. The nal capacity of 164.56GB (82.28GB*2) is twice capacities of the smallest size of the four hard drives. [ Dene LD Menu ] LD No RAID Mode T otal Drv Capacity(G[...]

5 85 Create RAID Ready A "RAID Ready" system is a specic system conguration that, with the addition of a second Serial A T A hard drive, can be seamlessly migrated to a conguration that provides either improved storage performance or data protection from a single hard drive failure. 1. Select [2] from the main menu, "Dene[...]

5 86 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. The conguration of LD1 array is completed. [ Dene LD Menu ] LD No RAID Mode T otal Drv Capacity(GB) Status LD 1 RAID 0 2 163.99 Functional LD 2 −−−− −−−− −−−−−−−− −−−− LD 3 −−−− −−−− −−−−−−−− −−−[...]

5 87 Create JBOD Here, we will show you how to create a JBOD Logical Drives (LD) by using four hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears. 2. Press [Enter], the screen appears as below . 3. Use [↓] key to select the hard disks, press [Space] key to change its assignment status to "Y". 4. Press [Ctr[...]

5 88 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. The conguration of LD1 array is completed. T otal size is 82.28+1 19.96+250.00+320.00 = 772.24GB LD No RAID Mode T otal Drv LD 1 JBOD 4 Stripe Block: 64 KB Fast Init: ON Gigabyte Boundary: ON Cache Mode: WriteThru Channel :ID Drive Model Compatibilities Capacity(GB) Assignmen[...]

5 89 5-4 Install a New Windows XP Assume a Mirrored array (249.99GB) was created as introduced in section 5-3, after the system restarts : 1. Press <DEL> to enter BIOS Setup during POST . 2. Insert the Windows installation CD into the optical drive. 3. Set the “1st Boot Device” to “CD/DVD-ROM”, save changes and exit BIOS. 4. The compu[...]

5 90 5. After some les are copied to your system, the following picture appears, press <S> to continue the specic driver installation. 6. It will ask you to insert the RAID driver diskette into you oppy drive. Press <Enter> after it is done. Windows Setup Please insert the disk labeled manufacturer-supplied hardware support dis[...]

5 91 7. There are two drivers, for your 32-bit XP system, press [Enter] to select the rst driver - "AMD AHCI Compatible RAID Controller-x86 platform". 8. A conrmation message appears to double check if the driver is really what we wanted, press <Enter> to continue. Windows Setup Setup will load support for the following mass s[...]

5 92 9. Windows will display the partition of your system. As we are using a Mirrored RAID array as an example, its size 232.88GB is now displayed as 238410MB. Y ou can press [C] to create partitions as many as you wish, assign them C:, D: or E: logical drive names. (Note : 238410MB/1024 = 232.82GB) 10. In this example, we will create a 30GB partit[...]

5 93 5-5 Setting Up a Non-Bootable RAID Array This section assumes the following setup : ■ Boot Disk with Windows XP installed : One hard disk HDS728090PLA T20 (80GB) is connected to the IDE channel, and set to Master . ■ A Mirrored RAID Array Disk : T wo SA T A hard disks are congured as a mirrored RAID1 array , they are : Hitachi HDT725025[...]

5 94 2. Select a RAID array for use (also can refer to section 5-3) After rebooting your computer , you will see the RAID software prompting you to press [Ctrl-F]. Press [Ctrl-F] to enter the FastBuild BIOS setup and congure the mirrored RAID array as described in the 5-3 section. Finally , you can reach this step as depicted. 3. Exit FastBuild [...]

5 95 5. After the AMD RAID driver is installed, it will ask you to click "Finish" to restart your computer . 6. When Windows starts, a message is prompting you to reboot again. Click "Y es" to restart your computer .[...]

5 96 7. After PC starts, the RAID array is now ready to be initialized under Windows. Launch Computer Management by clicking Start -> (Settings ->) Control Panel then open the Administrative T ools folder and double click on Computer Management. Click Disk Management (under the Storage section). The Initialize and Convert Disk Wizard appears.[...]

5 97 1 1. The Computer Management window appears. The actual disks listed will depend on your system. In below gure, you can see there is a 232.82 GB unallocated partition. Y ou must format the unallocated disk space before using it. Right click "Unallocated space", select "New Partition…" and follow the Wizard instructions[...]

5 98 17. The format of disk array (Disk1) is in processing. 18. Format completed, now you can start using your RAID array .[...]