Fujitsu HE4VS01E manual

Before using the display , read the User’ s manual (1/2) and the User’ s manual (2/2) carefully so that you know how to use the display correctly . Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep these manuals where the user can access them readily . * Install[...]

E-2 ACCESSORIES CHECKING ACCESSORIES One remote control T wo AA batteries T wo user’ s manuals One power cable T wo ferrite cores CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making an y connections. Loose connectors can result in picture or color problems. Mak e sure that all connectors[...]

E-3 English PA RT NAMES AND FUNCTIONS Front 1 Power indicator lamp This lamp sho ws the state of the po wer supply . Lit (red): Power OFF (stand-by) Lit (green): Pow er ON Lit (orange): Power sa ving (DPMS: Power saving function) mode ON (Please refer to E-17 of the User's Manual(2/2).) Flashing (red or green): Malfunction (Flashes dif ferentl[...]

E-4 1 OFF/STD-BY switch OFF : T he power indicator lamp g oes off, and the po wer can’t be turned on by the po wer button. The power is partly supplied. STD-BY :The po wer indica tor lamp lights red, and the power can be tur ned on or off by the power b utton. 2 RS-232C terminal (RS-232C) This terminal is provided for you to control the display f[...]

E-5 English Description of Input T erminals Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (T ransmit Data) 4D TR (Data T erminal ready) 5 GND (Ground) 6 DSR (Data Set Ready) 7R TS (Request T o send) 8 CTS (Clear T o Send) 9 RI (Ring Indication) RS-232C terminal (RS-232C) Pin No. Input signal Pin No. Input signal 1 Red 9 — 2[...]

E-6 INST ALLA TION To prev ent the display’ s internal components from overheating, make sure that the display is installed in a well-ventilated loc ation. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this displa y. Also, be sure that your dealer performs the installation. See[...]

E-7 English OPTIONS W all-mounting Bracket 0° to 15° mounting angle P-WB4201 Ceiling-mounting unit 0° to 15° mounting angle P-CT4200 Desktop Stand unit P-TT4200 *W hen installing an option, make sure that all installation requirements for that option (as gi ven in the rele vant instruction manual) are met. *T he colors of options do not match t[...]

E-8 MAIN SUPPOR TED SIGNALS This display can store the latest four types of signals for RGB adjustment v alue. The f ifth input signal will delete the adjust ment v alue of the first input signal. To do this, select a desired signal and follow the instructions in “ Adjusting Screen P osition and Size” on the User’ s Man ual (2/2) to adjust th[...]

E-9 English SPECIFICA TION Model P42HCA30W/P42HCA30E/P42HCA30A Screen size 42" wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal) Aspect ratio 16:9 (wide) W eight 29.5 kg / 65.0 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm 40.7 (W) x 25.2 (H) x 3.3 (D) inch (does not include [...]

E-10 SPECIFICA TION (Continued) Model P42VCA30W/P42VCA30E/P42VCA30A HE4VS01W/HE4VS01E/HE4VS01A Screen size 42" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 31 kg / 68 lbs 31.5 kg / 69.4 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm 40.7 ([...]

Before using the display , read the User’ s manual (1/2) and the User’ s manual (2/2) carefully so that you know how to use the display correctly . Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep these manuals where the user can access them readily . * Install[...]

E-2 SAFETY PRECAUTIONS IMPOR T ANT INFORMA TION W ARNING: This is a Class A product. In a domestic en vironment this product may cause radio interference in which case the user may be required to take adequate measures. W ARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PR ODUCT T O RAIN OR MOISTURE. FCC NOTICE This equipme[...]

E-3 English 14) Refer all servicing to qualif ied service personnel. Servicing is required when the apparatus has been damaged in any way , su ch as power - supply cord or plug is damaged, liquid has been spilled or objects hav e fallen into the apparatus, the apparatus has been expos ed to rain or moisture, dose not operate normally , or has been [...]

E-4 RECEPT ACLE Make sure that the po wer cable’ s grounding wire is grounded. The display comes with a 3-prong po wer plug; one pr ong is connected to the grounding wire. If you hav e only a 2-hole receptacl e, you will need to hav e it replaced. Contact your dealer for more information. • Hav e the display inspected and cleaned by your dealer[...]

E-5 English EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Remote control Display PC CONNECTION EXAMPLES • As the cable for connecting a PC diff ers with the PC model, please consult your dealer for information on the right cable to pu rchase. Note • Unplug the power cord from the AC outlet before you connect e xternal components. • Also refer [...]

E-6 USING THE REMOTE CONTROL 1 Power ON button [POWER ON] ➝ (See P . E-8.) 2 Power OFF button [POWER OFF] ➝ (See P . E-8.) 3 RGB input mode selector button [RGB] 4 Video input mode selector button [VIDEO] Unused. 5 Wide screen selector button [WIDE] ➝ (See P . E-8–E-9.) 6 Menu button [MENU] ➝ (See P . E-10–E-21.) Use this button to disp[...]

E-7 English PRECAUTIONS T o prevent malfunction, be sure not to apply any form of se vere shock to the remote control. T o prevent malfunction or def ormation, be sure not to allow the remote control to become wet; also, keep it a way from hot locat ions or heating equipment. Be sure not to clean the remote control using a cloth dampened in any v o[...]

E-8 Note • Displaying a picture in a Normal mode for extended periods of time ma y cause phosphor burn-in. • A variety of pictur e modes are av aila ble with this display . Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV pr o gram or video media, the pictures will appe[...]

E-9 English Press . The currently selected mode will appear . Press to select a desired picture mode. Each time you press , a dif fer ent picture mode appears. The sequences used are as follo ws: When you are in an RGB input mode * Depending on the type of signal, some aspects may not be selected. 1 2 SWITCHING BETWEEN SCREEN SIZES Normal mode Info[...]

E-10 ADJUSTING PICTURES (PICTURE MENU) Press . The main menu screen will appear . Press or to select “PICTURE”. Each time you press or , one of the a vailable menus appears in the follo wing sequence: The PICTURE Menu screen will appear . Press or to select “T int”. Press . The “T int” adjustment screen will appear . Press or to change [...]

E-11 • Setting Picture Mode (Picture Mode) Can set up the picture mode. Each time you press or , one of the av ailab le choices appears in the following sequence: Dynamic: Suitable for watching a normal motion picture.(Standard) Real: Makes a strong contrast picture. Static: Suitable for watching a still picture. Press to store. * Select Dynamic,[...]

E-12 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Press . The main menu screen will appear . Press or to select “ POSITION/SIZE ” . Each time you press or , one of the a vailable menus appears in the follo wing sequence: The POSITION/SIZE Menu screen will appear . Press or to select “ Position ” . Press . The “ Position ” adj[...]

E-13 Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. : Mo ves screen to the left. V ertical position (V ertical) : Moves screen up. : Mo ves screen do wn. Press to store. Adjusting Screen Size (Size) Screen width (W idth) : Increases width. : Reduces width. Screen height (Height) : Increases height[...]

E-14 OTHER ADJUSTMENTS (FEA TURES MENU) Press . The main menu screen will appear . Press or to select “FEA TURES”. Each time you press or , one of the av ailable menus appears in the following sequence: The FEA TURES Menu screen will appear . Press or to select "On Screen Menu". • Select a desired option for adjustment/setup from Ad[...]

E-15 • FEA TURES setup screen has the following 4 options. Adjustment : Can make a fine adjustment of pictures such as Dot Cloc k, Clamp Position. On Screen Menu : Can make a display setting such as OSD, Language. (See P . E-16.) Input T erminal : Can make an input terminal setting such as D-SUB Input. (See P . E-16.) Others : Can make other sett[...]

E-16 • Selecting the settings of D-SUB Input terminal Y ou can use this option to select the signal system it will receiv e to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears. (2) Select the signal system to receive . Each time you press or , one of the a vailable choices appears in the follo wing sequence: RGB[...]

E-17 English OTHERS MENU • Selecting time before DPMS starts (DPMS) Y ou can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display po wer management signaling”) allows the display to maintain an automatic power sa ving function. This function causes on-screen information to disappear unt[...]

E-18 OTHER ADJUSTMENTS (FEA TURES MENU)(C ontinued) • Minimizing phosphor burn-in (Screen Orbiter) Y ou can use this option to move the screen position to minimize phosphor -induced “ burn-in ” . Follo w the steps below . (1) Select “ Screen Orbiter ” and press . The “ Screen Orbiter ” setting screen will appear . (2) Press or to sele[...]

E-19 English • Assigning Numbers to Displays (Monitor No.) When you use two or more displays, you can use a single remote control to control indi vidual displays by assigning a unique number to each of the displays. Each time you press or , one of the av ailable n umbers appears in the follo wing sequence: 0: Y ou can normally control displays. Y[...]

E-20 • Setting Exhibition Mode (Exhibition Mode) Y ou can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons. Each time you press or , one of the av ailable choices appears in the following sequence: On Off On: Sets up Exhibition mode. Of f: Sets up normal mode. Press to store. * In Exhibit[...]

E-21 English INITIALIZA TION OF USER ADJUSTMENT V ALUE (F ACTOR Y DEF AUL T) Press . The main menu screen will appear . Press or to select “ F ACTORY DEF AUL T ” . Each time you press or , one of the a vailable menus appears in the follo wing sequence: The F A CTOR Y DEF A UL T Menu screen will appear . Press . • Displays the message of wheth[...]

E-22 Action • Check w hether the po wer plug is securely inserted into the receptacle. • Check cables for disconnection. • Check w hether the po wer for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check w hether the input mode display is colored pink.Special setup may hav e been made. Re[...]