Go to page of
Similar user manuals
-
Marine GPS System
Furuno GP-1870F
187 pages 22.82 mb -
Marine GPS System
Furuno GP-1800
90 pages 1.79 mb -
Marine GPS System
Furuno GD-1900C
100 pages 4.95 mb -
Marine GPS System
Furuno 1833C
100 pages 4.95 mb -
Marine GPS System
Furuno GP-7000F
52 pages 1.38 mb -
Marine GPS System
Furuno GP-1250
146 pages 2.75 mb -
Marine GPS System
Furuno 1943C
100 pages 4.95 mb -
Marine GPS System
Furuno 2105
10 pages 0.91 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Furuno 1823C, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Furuno 1823C one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Furuno 1823C. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Furuno 1823C should contain:
- informations concerning technical data of Furuno 1823C
- name of the manufacturer and a year of construction of the Furuno 1823C item
- rules of operation, control and maintenance of the Furuno 1823C item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Furuno 1823C alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Furuno 1823C, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Furuno service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Furuno 1823C.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Furuno 1823C item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
PRINTED IN JAP AN MARINE RAD AR MODEL1823C MARINE RAD AR MODEL1833C MARINE RAD AR MODEL1933C MARINE RAD AR MODEL1943C MARINE RAD AR MODEL1953C COLOR VIDEO PLO TTER GD-1900C Back[...]
-
Page 2
The paper used in this manual is elemental chlorine free. Your Local Agent/Dealer Your Local Agent/Dealer 9-52 A shihar a-cho, 9-52 A shihar a-cho, Nishinom i y a 662-8580, JAPAN Nishinom i y a 662-8580, JAPAN Tele p hone : Tele p hone : 0798-65-2111 0798-65-2111 Fax Fax 0798-65-4200 0798-65-4200 : : FIRST E DITION : FIRST E DITION : APR. APR. 2001[...]
-
Page 3
i WARNING Radio Frequency Radiation Hazard The radar antenna emits electromagnetic radio frequency (RF) energy which can be harmful, particularly to your eyes. Never look directly into the antenna aperture from a close distance while the radar is in operation or expose yourself to the trans- mitting antenna at a close distance. Distances at which R[...]
-
Page 4
ii T A BL E OF CO NT E NTS SA FETY I NST RUCTIONS ........................................................................................ i EQUIPME NT LIS TS ................................................................................................. iii SYST EM CONFIG URA T IONS ...............................................................[...]
-
Page 5
iii EQUIPMENT LI STS S t anda rd supp ly Name T ype Cod e No. Qty Remarks RDP-138* - Norm al bright LCD, 300 Cd Displ ay unit RDP-139 - 1 High br i ght LCD, 700 Cd RSB- 0094-0075 - MO DEL 1823C RSB- 0071-057 - MO DEL 1833C XN10A-RSB- 0070-064 - MODE L1933C, 24 rpm, for RDP-138/ 139 XN10A-RSB- 0073-064 - MODE L1933C, 48 rpm, for RDP-138 XN12A-RSB- 0[...]
-
Page 6
i v Op ti on al su pp l y Nam e T ype C od e No . Qty Rem ar ks 000- 013- 484 For G D-1900 C, 100 V A C 000- 013- 485 For G D-1900 C, 1 10 V AC 000- 013- 486 For G D-1900 C, 220 V A C PR-62 000- 013- 487 1 For GD-1900C, 230 V AC Re c tifie r RU-3 423 000- 030- 443 1 For M ODEL series Ext er nal buzz er OP03- 13 6 000- 086- 443 1 M J - A 6S P F 0014[...]
-
Page 7
v SYSTEM CONFIGU R A TIONS Al l Nav Net pro duct s incorpor at e a “ netw ork ci rcuit board” t o i nt egrate eac h Na vNet pr od uct on board t hrou gh a n opti onal LAN cabl e (Et her n et 10BASE-T ). Each NavNet prod uct i s assi gned a n I P addr es s t o enabl e transfer of i mages b etw een other Na vNet product s. For exampl e, vi de o p[...]
-
Page 8
vi Network Sounder ETR-6/10N ETR-30N GPS receiver GP-310B/320B 12 - 24 VDC Other NavNet Unit (Model 1833C, etc.) Display unit RDP-138/139 Ship's mains 100/110/115/220/230 VAC 1 φ , 50/60 Hz : Standard : Option Remote Controller RMC-100 External buzzer PC Echo sounder Echosounder Navigator Rectifier PR-62 VGA monitor Remote display Video equip[...]
-
Page 9
vii Figure 2 (a) NavNet system, t hree-unit connect ion HUB Network Sounder ETR-6/10N ETR-30N (option) Radar Antenna Unit OR GPS Receiv er GP-310B/320B Radar Antenna Unit OR GPS Receiv er GP-310B/320B RAD AR or PLO TTER RAD AR or PLO TTER Sounder data Radar data Plotter data Note: The picture disappears 10 seconds after the NavNet cable is disconne[...]
-
Page 10
viii This page is intentionall y left blank.[...]
-
Page 11
1-1 1. MOUNTING 1.1 Installation of Displa y Unit The display unit can be installed on a tablet op, on the overhead or f lush m ounted in a console or panel. T abletop, overhead mounting method W hen selecting a m ounting location f or the display unit keep t he f ollowing in mind: • Keep the display unit out of direct sunlight. • The t em pera[...]
-
Page 12
1-2 1.1.1 Mounti ng pr ocedure T ab letop, ov erhea d mounting Follow the procedure below to m ount the display unit on a t abletop or the overhead. 1. Fix the hanger by f our t apping screw (5x 20). 2. Screw knob bolts in display unit, set it t o hanger , and tighten knob bolt s. 3. Attach hard cover to protect LCD. T apping scre ws (4 pcs.) Knob [...]
-
Page 13
1-3 Flush mounting Note: Use supplied six pan head screws w hen the thickness of t he bulkhead is fr om 1 1 to 14 m m . For bulkhead which exceeds 14 mm in thickness the lengt h of the pan head screws should be bulkhead thickness (A) plus 7.8± 2 mm . Also t he lengt h of B should be m ax. 8 m m . A B A: thickness of b ulkhead Fixing screw , side v[...]
-
Page 14
1-4 1.2 Mounting of Antenna Unit f o r MODEL1833C 1.2.1 Mounti ng considerations W hen selecting a m ounting location f or the ant enna unit keep in m ind the f ollowing points. • Inst all the antenna unit on t he hardtop, radar arch or on a m ast on an appropriat e platf orm . (For sailboats, a m ount ing bracket is optionally available.) It sho[...]
-
Page 15
1-5 1.2.2 Mounti ng antenna unit of MODEL 1833C 1. Open the antenna unit packing box carefully . 2. Unbolt the four bolts at the base of the radom e to rem ove the radom e cover . Radome cover Antenna unit The m ounting surf ace m ust be parallel with the waterline and provided w it h five holes (f our fixing holes and one cable entry) whose dimens[...]
-
Page 16
1-6 Flat washer Spring washer Platform Antenna base plate M10 x 25 Hex bolt Radome 5 - 10 mm Apply silicone sealant. Effective thread length 25 mm Gasket How to fasten t he radome base to t he mounting platform Wiring and final pr epara tion 4. Drill a hole of at least 20 m illim eters diam et er t hrough the deck or bulkhead to run the signal cabl[...]
-
Page 17
1-7 9. Attach three connectors of t he signal cable t o respective ports as shown below . to one of the screws of the cable clamping plate 9-pin connector : to J801 on MD-9208 4-pin connector : to J802 on MD-9208 13-pin connector : to J611 on IF-9214 Signal cable, antenna unit side J802 J801 J611 MD-9208 IF-9214 PTU-9335 Cable entr y RF unit[...]
-
Page 18
1-8 10. Att ach t he EMI cores supplied as shown below . J806 J805 J803 J804 J802 J801 Motor J613 J611 J1 EMI core E04SS251512 (Abov e cable clamping plate) Cable entrance IF9214 IF9214A PTU-9335 MD-9208 Cable clamping plate How to a ttach EM I core 1 1. Fix the shield cover . Do not pinch t he cable. 12. Att ach the radom e cover , aligning t rian[...]
-
Page 19
1-9 1.2.3 Mounti ng the optional mounti ng bracket A m ount ing bracket f or fast ening t he antenna unit f or MODEL1833C to a m ast on a sailboat is optionally available. Mounting brac ket 1 T ype: OP03-92 Code No.: 008-445-070 T able 1-1 Mounting bracket contents Ty pe Code No. Qty Hex. bolt M4X12 000-804-725 4 Hex. bolt M8X20 000-805-707 8 Mount[...]
-
Page 20
1-10 Mounting plate Suppor t plate (1) Suppor t plate (2) Brac ket (1) Brac ket (2) Fixing plate M8 x 20 M8 x 20 M4 x 12 M10 x 25 (supplied with antenna unit) M8 x 20 (A) Assembling the mounting brac ket (B) Fastening antenna to mounting bracket How to assemble and mount the optional mount ing bracket[...]
-
Page 21
1-11 1.3 Mounting of Antenna Unit f o r MODEL1933C/1943C/1953C 1.3.1 Mounti ng considerations • The ant enna unit is generally installed either on t op of the wheelhouse or on the radar m ast on a suitable platf orm . Locat e t he antenna unit where there is a good all-round view . Any obstruction will cause shadow and blind sectors. A m ast for [...]
-
Page 22
1-12 1.3.2 Mounti ng antenna unit of MODEL 1933C/1943C/ 1953C Referring t o t he outline drawing at the back of t his m anual, drill five holes in the m ount ing platf orm : f our holes of 15 m m diam eter f or fixing the ant enna unit and one hole of 25-30 m m diam et er for t he signal cable. Fastening the Rad i ato r to the Rad i ato r Bracket F[...]
-
Page 23
1-13 Mounting of antenna unit The antenna unit can be m ount ed using the f ixing holes on the outside (200 x 200 m m ) or inside (140 x 150 mm ) t he antenna unit. Outsid e fi xing h oles Use the hex head bolt (supplied) to m ount t he antenna unit as below . 1. Lay the corrosion-proof rubber m at (supplied) on t he m ounting platf orm . Ground te[...]
-
Page 24
1-14 He x bolt Seal washer Flat washer Spring washer Nut Fixing the antenna unit chassis 4. Pass f lat washers (M12, supplied), spring w ashers (M12, supplied) and nuts (M12, supplied) onto hex bolts. F ast en by tightening nuts. Do not fast en by tightening the hex bolts; seal washers may be dam aged. Antenna unit Mounting platform Silicone sealan[...]
-
Page 25
1-15 Ground wire Hex bolt Flat washer Spring washer Flat washer Hex nut Silicone sealant Hex nut Weld here. Silicone sealant Ground wire antenna unit OR Flat washer Spring washer Ground wire GROUND TERMINAL GROUND POINT He x nut How to coat ground point and ground t erminal with silicone sealant[...]
-
Page 26
1-16 Fixing holes ins ide antenna unit This m ethod requires rem oval of t he RF unit in the ant enna unit to access inside f ixing holes. Use hex head bolts, f lat washers, spring w ashers and nuts (local supply) to m ount the antenna unit, confirm ing length of bolt s. 1. Loose f our scanner bolts t o open the antenna unit . Refer to figure in be[...]
-
Page 27
1-17 Connect ing the Signal Ca ble Only the signal cable runs f r om t he display unit (1953C: power supply unit) to the antenna unit. In order t o m inim ize the chance of picking up electrical int erference, avoid w here possible routing the signal cable near other onboard elect rical equipm ent. Also, avoid running the cable in parallel with pow[...]
-
Page 28
1-18 Sheath CABLE GLAND Plate Gasket Flat washer Bolt Within 4 cm T ubing Shield How to fix signal cable in cable gland 6. Unf asten f our screws show n in the figure below . Antenna unit chassis, cover opened 7. Pass t he signal cable through the cable protect or . Antenna unit chassis, cover opened 8. Connect the signal cable to the RTB Board (03[...]
-
Page 29
1-19 Antenna unit chassis, cover opened 10. Fix the signal cable with the cable clam p. 1 1. Release the stay and close the cover . Loosely f ast en t he cover fixing screws; you w ill have to m ake som e adj ustm ents inside af ter com pletion of wiring. Note: W hen closing the cover , set t he gaskets to grooves in the bott om chassis, then tight[...]
-
Page 30
1-20 1.4 Mounting of P ower Suppl y Unit f or MODEL 1953C MODEL 1953C has its own pow er supply because of high power consumption. The power supply unit can be installed almost anywhere provided the location is dry , well-v entilated, suff icient m aint enance space is provided (w ithin 5 m f rom the display unit). Note: Do not install t he power s[...]
-
Page 31
1-21 1.5 Mounting of Antenna Unit for MODEL 1823C 1.5.1 Mounting consi deration See the m ount ing consideration f or MODEL1833C on page 1-4. The compass safe distance of 1.25 meters (standard compass) and 0.85 met ers (steering compass) should be observed to prevent deviat ion of t he m agnet ic compass. 1.5.2 Mounting antenna uni t of MODEL 1823C[...]
-
Page 32
1-22 Flat washer Antenna base assy. Spring washer Platform Hex bolt Apply silicone sealant. (M10 x 25 or M10 x 20) Transceiver module 5 mm or under : M10x20 5-10mm: M10x25 over 10 mm: local supplied bolts Efeective thread length: 12 mm How to fasten t he base t o plat form Remov e and discard the pac king mater ial. Snap holder Antenna unit, inside[...]
-
Page 33
1-23 5. Unf asten t he rotation detect or cable from t he cable clam ps. 6. Unf asten 16 screws ( ! 1 , ! 2 and ! 3 in the following figure) to dism ount the shield plat e, core case assy and core case cover . GND IF +V OP GND -V OP Vt GND Pan head screws M3x10 2 pcs. 2 Shield plate Pan head screws M4x8 9 pcs. Pan head screws M4x10 5 pcs. Core case[...]
-
Page 34
1-24 7. Pass t he antenna cable with connector t hrough the cable gla nd, gasket and cabl e entrance of t he antenna unit, and then tight en cable gl and. Note 1: Be sure the shrink t ube on the antenna cable does not contact to the gasket. Note 2: Close the gask et t ightly to insert int o t he cable entranc e. Confirm that there is no space betwe[...]
-
Page 35
1-2 5 9. Att ach connectors of t he ante nn a cabl e as ap pr opri at e, and t hen fas t e n a pan head screw M 4x 10 t o fix shi eld cabl e and c or e c ase ( r emoved at st ep 6. ) Antenn a unit, c onnec t or loc ation and f i x ing the shield c ab le w /cor e c as e 10.Put EMI core on antenna c able int o the c or e cas e at t ached at step 9. A[...]
-
Page 36
1-26 12. Pass the cable from the rotat ion det ector through t wo cable clam ps. Rotate detector Cable clamps Cable tie (Another should be inside.) Antenna unit, cla mping t he rotation detect or cable 13. Follow the instructions on t he label i nside the m ounting base to secure t he snap assy . 14. Conf irm that the rubber gasket is properl y pos[...]
-
Page 37
2-1 2. WIRING 2.1 S t andard W iring Al l wi ri ng are t er m i nat ed at the r ear of the di spl ay uni t. NavNet equipment, CU-200 (6P) CAUTION The display unit is shipped with 15 A fuse. Replace fuse with 7A when using the equipment in the following condition; MODEL1823C/1833C/1933C/ 1943C: ship's battery is 24 VDC MODEL1953C/GD-1900C: ship[...]
-
Page 38
2-2 12-24 VDC Connect t he pow er cable t o the P OW ER connector at the bac k of t he di spl ay uni t. DJ-1 For M ODEL1823C/1833C/ 1933C/1943C/ 1953C, r emove the w aterproofi ng cap f rom DJ -1 port and di sc ard i t. M ODEL1823C/ 1833C: Connect t he M J-B 24LPF0002 cabl e from the antenna uni t t o thi s port . M ODEL1933C/ 1943C/1953C: Connect [...]
-
Page 39
2-3 Con n ecti n g G P-310B/ 320B t o DA T A 2 port W hen an equipm ent i s c onnec t ed t o DA T A 1 port, G PS r ec ei ver GP- 310B / 320B can be connect ed t o DA T A 2 port as show n below . Y ou need a junct i on box and opt i onal cabl e M J-A 6S P F 0003- 050 or M J-A6SPF 0009-100. 1 2 3 4 5 6 7 JUNCTION BO X 1 2 3 4 5 6 TD-A TD-B RD-A RD-B [...]
-
Page 40
2-4 2.2 External Buzzer (OP03-136, option) Connection The optional external buzzer provides a louder alert w hen the alarm is viorated. External buzz er T ype: OP03-136 Code no.: 000-086-443 Further , you need the optional cable assy MJ-A7SPF0007-050 (w /7P connector , 5 m, code no. 000-144-418). 1. Attach the MJ-A7SPF0007-050 cable assy (option) t[...]
-
Page 41
2-5 2.3 Ho w to Connect with PC W hen connecting with the personal comput er , prepare t he optional cable assy MJ-A7SPF0007-050 and D-sub 9 pins plug (local supply), and connect them as f ollows. SHIELD BLUE D-SUB 9PIN MJ-A7SPF0007-050 1 5 6 9 WHITE BLUE CD RD TD DTR GND DSR RT S CTS RI 1 2 3 4 5 6 7 8 9 TD_DT RD_DT RD3_A RD3_B +12V EXT BUZZ GND 1[...]
-
Page 42
2-6 2.4 Wiring of Power Supply Unit (MODEL1953C only) 1. Loosen t hree M4 screws to remove the cable clam p. 2. Loosen si x M4 screws to remove the unit cover . 3. A t tach t he VL connec t o r of p o w e r su p p l y cable VL3P-VV-S2X2C-AA050 (suppli e d as installation m aterial) to J1 on the POW ER Board. 4. At tach the VH and NH connectors of M[...]
-
Page 43
2-7 Note: The power for the power supply unit and display unit m ust be drawn from t he same power switch on the power term inal board. Other Equipment (ex. GPS, E/S etc.) Power terminal board Display unit Power supply unit Other Equipment (ex. GPS, E/S etc.) Other Equipment (ex. GPS, E/S etc.) Other Equipment (ex. GPS, E/S etc.) Other Equipment (e[...]
-
Page 44
2-8 2.5 Connection of CU-20 0 (opti on) 1) C onne ction be tw een one displa y un it and on e m e mory c ar d IF unit Connec t as s how n i n the f ig ur e b el o w . Display unit Memory card IF unit CU-200 NETWORK 12 VDC NETWORK MJ-A15A3F0003-030 (3 m, supplied) MJ-A6SPF/TM11AP8-C050 (5 m,supplied) two mini-cards 12 VDC 2) Con nect i on between o [...]
-
Page 45
3-1 3. A DJ USTM ENT 3.1 Ho w to Access to Inst all ation Men u Y ou should do t he s et up for t he equi pm e nt t hrough the i nstal l ation menu w hen ins t allat i on has be en f i ni shed. T o acces s t o the i nst all at i on menu, fol lo w the step s i n bel ow . 1. W ith th e disp lay powere d o ff, ho ld d o wn the [M EN U] ke y. T hen, mo[...]
-
Page 46
3-2 3.2 NETWORK SETUP Menu T o communi cat e w ith ot her Na vNet equi pme nt, this s et ti ng shoul d be done. 1. Open the I NS T ALL SET UP menu. 2. Press the NET W ORK SET UP sof t key . EDIT RETURN IP ADDRESS 172.031.003.003 HOST NAME RADAR________ RADAR SOURCE RADAR________ CHART SOURCE* ______________ ______________ ______________ SOUNDER SOU[...]
-
Page 47
3-3 Conte nt s of Netw ork s et up m enu Item Descri pt io n Def aul t Sett in g IP ADD RESS This ad dres s i s ass ig ned at t he f act ory . Ch ang e th e addres s ( l ast thr ee di g its; 001 t o 2 54) w hen l i ke m odel s ar e connec ted di rec tl y or thr oug h th e hub . D o this chang e b ef or e connec ti ng t h e equi pm ent to th e other[...]
-
Page 48
3-4 3.3 RAD AR SETUP Menu Aft er t he network setup, do the following in order to adjust t he radar . Open the INST ALL SETUP m enu, and t hen press the RADAR SETUP sof t key to display the RADAR SETUP m enu. W hen the m essage of “RADAR DOES NO T TRANSMIT . TRANSMIT RADAR?” appears, press the [ E NT ER] knob to transm it or [ CLEAR] key to can[...]
-
Page 49
3-5 3.3.1 A NTENN A TYPE Select the antenna t y pe connecting with your display unit. Def ault set t ing is “F”. Select the antenna t ype ref erring t o the table shown belo w . After selection, press the [ENT ER] knob or ENTER soft key . Y our unit Setting MODEL1 823C A MODEL1 833C B MODEL1 933C F MODEL1 943C G MODE L1953C H 3.3.2 TUNING MODEL[...]
-
Page 50
3-6 Antenna tuning Initialize the tuning as f ollows. 1. T ransm it the radar . 2. O pen the RADAR SETUP m enu, and t hen select TUNING by the trackball or [ENT ER] knob. 3. Press t he EDIT sof t key or [ENTER] knob to show the setting window . TUNING ON OFF T uning setup menu 4. Sele ct ON. 5. Press t he [ENTER] knob or ENT ER sof t key to st art [...]
-
Page 51
3-7 ON OFF TIMING ADJUST Timing adjust setting menu 5. Select ON and press the [E NT ER] knob or ENTER sof t key to show the radar display . PUSH ENTER KNOB AFTER ADJUSTING SWEEP TIMING. RETURN Timing adjustment setting display 6. Rot ate the [E NT ER] knob to straight en the target select ed at step 2, and t hen press the RETURN sof t key to f ini[...]
-
Page 52
3-8 3.3.5 HEADI NG ADJUST Y ou have mounted the ant enna unit f acing straight ahead in the direct ion of t he bow . Theref ore, a sm all but conspicuous target dead ahead visually should appear on the heading line (zero degrees). In practice, you will probably observ e som e sm all error on t he display because of the difficult y in achieving accu[...]
-
Page 53
3-9 3.3.6 M. B. (Main Bang) SUPPRESSION Main bang (black hole), w hich appears at the display center on short ranges, can suppressed as follows. 1. O pen the RADAR SETUP m enu and select M.B. SUPPRESSI ON by trackball or [ENTER] knob. 2. Press t he EDIT sof t key or [ENTER] knob to show the setting window . 3. Sele ct ON. 4. Press t he [ENTER] knob[...]
-
Page 54
3-10 3.3.8 STC CUR VE The def ault ST C curve can be maint ained in m ost cases. If necessary the ST C curve can be changed as follows: 1. O pen the RADAR SETUP m enu and select ST C CURVE. 2. Press t he EDIT sof t key or [ENTER] knob to show the setting window . RETURN NARRO W NORMAL WIDE STC CUR VE STC curve setting window 3. Select STC curv e; N[...]
-
Page 55
3-1 1 3.4 C hecking Magnetr on H eater V olt age Note : T his confi r m at i on/ adjus t ment s houl d onl y be perfor m ed by a qual i f ied s er vi c e techni ci an. M agnet ron he ater volt age is f or m ed on t he PT U (1833C)/ M D (1823C/1 93 3C/ 19 43 C/195 3C) Board of t he ante nn a uni t , and prea djusted at the f act ory . Theref ore no [...]
-
Page 56
3-12 2. Select POSITI ON SOURCE and press the [ E DI T ] key or [ENTER] knob t o show the position source window . POSITION SOURCE ▲ ▼ FUR UNO BB GPS GP LC ALL 3. Select FURUNO BB GPS, GP , LC or ALL as appropriate and press t he [ ENTER] knob or ENTER soft key . FURUNO BB GPS: GPS Receiv er GP-310B/320B GP: GPS navigator (via NETW ORK or DA T [...]
-
Page 57
3-13 GPS SETUP LOCAL TIME OFFSET +00:00 GEODETIC DATUM WGS-84 POSITION SMOOTHING 000 second(s) SPD/CSE SMOOTHING 005 second(s) GPS SPEED AVERAGE 060 second(s) LATITUDE OFFSET 0.000’N LONGITUDE OFFSET 0.000’E DISABLE SATELLITE - - - - - - LATITUDE 45 35.000’ N LONGITUDE 125 00.000’ W ANTENNA HEIGHT 005 m GPS FIX MODE 2D/3D COLD START NO EDIT[...]
-
Page 58
3-14 Contents of G PS sensor set tings menu Item Description Settings Default Setting Local T ime Of fset All ows the user to use l ocal time (ins tead of UTC time). Enter time dif ference between local ti me and UTC time. Use the + < - - > - soft key to switch from plus to minus and vi ce versa. -13:30 to +13:30 hr 0 hr (no offset) Geodetic [...]
-
Page 59
3-15 Contents of G PS sensor set tings menu (con’ t.) Item Description Settings Default Setting Longitude Of fset As above but for longi tude. Use the W < - - > E soft key to sw itch coordinat e. 9.999’E – 9.999’W 0.0’ (no offset) Disable Sat ellite Every GPS satellite is broadcasting abnormal satellite number (s) in its Almanac, wh[...]
-
Page 60
3-16 3.6 Setting up Dat a Port s Setup t he dat a port s accor di ng t o the equi pm ent connecte d t o them as f ol l ow s . 1. Press t he [M ENU] key t o open t he men u. 2. Press t he SY ST EM CO NFI GURA TI O N, SY STEM SET UP and PO RT SETUP s of t keys . 3. Press the GPS/N MEA POR T for DA T A 1 po rt, N MEA PORT fo r D A T A 2 po rt, PC /N M[...]
-
Page 61
3-17 NMEA Version 2.0 Range and bearing mode: Rhumb line NMEA Version 1.5 Range and bearing mode: Great circle SELECT SNTNC RETURN ON/OFF AAM APB BOD BWR DPT GGA GLL GTD MTW RMA RMB RMC VHW VTG WPL XTE ZDA HDT HDG MWV TTM -- ON -- -- -- -- ON -- -- -- ON ON -- ON -- -- ON -- -- -- -[...]
-
Page 62
3-18 Conte nt s of DA T A 4 PO RT m enu Item Description Settings Default Setting NMEA Output Format S elects NMEA output forma t. NMEA V er . 1.5, NMEA V er . 2.0 NMEA V er . 2.0 Baud Rate Sets baud rate . 4800, 9600, 19200 (b ps) 4800(bps) Bit Length Sets chara cter length. 8 bit, 7 bit 8 bit Stop Bit Sets number of stop bits. 1 bit, 2 bit 1 bit [...]
-
Page 63
3-19 2. Press t he NE X T P A GE s of t key to show Page 2. 3. Selec t I NFRA RE D RE M O T E MO DE, and pr es s t he EDI T so f t k ey . The SELEC T I/R R EM OTE w indow app ears . 4. Point t he remot e cont r ol l er t ow ar d t he di spl ay unit, and press any key on t he r em ot e contr ol l er . Preset mode app ear s i n t he r em ot e c ontro[...]
-
Page 64
3-20 This page is intentionally lef t blank.[...]
-
Page 65
4-1 4. OPTIONS 4.1 A RP Kit A RP-1 1 Necessary parts Name: ARP kit T ype: ARP-1 1 Code no.: 008-523-050 T able 4-1 ARP-1 1 content s Name T ype Code No. Qty ARP Board 18P9013 008-521-830 1 Pan head screw M3x 6 C2700W 000-881-403 4 SQ9 000-801-850 1 Spacer* SQ15 000-801-779 3 Spring washer* M3 C5191W 000-864-204 3 *Not used 1. Unscrew seven connecte[...]
-
Page 66
4-2 3. Disconnect the PH5P connector f rom J1357 on the PO W ER Board (19P1005). 4. Unf asten seven pan head screws (M3x 8) to dism ount the PO W ER Board and POW ER shield case from t he display unit. To J1357 on POWER Board POWER shield case POWER Board 19P1005 Pan head screws (M3x8) 7 pcs. SPU Board ARP Board J1357 P107 J112 Dismounting the POW [...]
-
Page 67
4-3 Order of fast ening screws 10. Fast en seven connector nut s.[...]
-
Page 68
4-4 4.2 Conne ction of V ideo e quipment / External Monitor/Remote Display The above units can be connect ed to the MODE L1823C/ 1833C/1933 C/1943C/1 953C and GD-1900C by using t he hole at the rear of t he display unit. Rem ove the cover to use t his hole. After connect ing, cover the hole with soft putty to seal. 12:00 Video recorder , CCD camera[...]
-
Page 69
4-5 For connection with the CCD cam era/ video recorder , the f ollowing cable is necessary (local supply). • Both side connect or s : RCA connect or (me t al) • Cable leng t h: short er t han 10 m • 2.5C2V or 3C2V (Japan Indust r ial Standard ( JI S), or t he equivalent) coaxial cable (Impedance: 75 Ω ) Conductor S = 0.19 mm ∅ = 0.5 mm 2[...]
-
Page 70
4-6 4. Set two cable tie “legs” (supplied w ith option kit) as shown below . Cable ties attachment. 5. Tie the connector assy w ith two cable ties attached at step 4. 6. Rem ount the POW ER Board and power shield case w ith pan head screws (M3x 8, 5 pcs.) 7. At tach the PH5P connector f rom SPU Board t o J1357 on t he PO W ER Board. 8. Pass t h[...]
-
Page 71
4-7 4.2.2 Connecting external monitor Y ou can display the MODEL1823C/1833C/1933C/1943C screen on the external m onit or , wh ich accepts industrial st andard VGA input by using the optional RG B output cable kit OP03-176. Supply m onitor and interconnect ion cable (with HD-15P connectors of m ale, three rows of 15 pins) locally . Necessary par ts [...]
-
Page 72
4-8 4. 2 .3 Co nn ecting re mot e di sp lay T he FURUNO Di s pl ay unit FM D-81 1, M O DEL18 32 or GD- 28 0/380, et c. c an be c onn ected to t he Na vNet di spl ay as remote di spl ay . T o int er c onne ct them, use a cabl e at t ached w ith or set as opt i on f or the r em ot e di s pl ay . For the net w ork system cons i st s of some uni t s , [...]
-
Page 73
4-9 4.2.4 Attaching more than tw o units W hen m ore t han t wo cables of PIP kit, VG A m onit or cable and rem ot e signal cable, use the cable tie supplied as the installat ion m aterial with the display unit to tie optional cables. Attach the cable t ie t o the hole on the PO W ER Board. Attach the cable tie here. Cable tie Attaching the cable t[...]
-
Page 74
4-1 0 4.3 Mountin g the Memory Card Inter face Un it T he memor y card int er f ace CU-200 e nabl es t o us e m or e t w o chart cards . T ype: CU-200 -NA V Code: 0 00-0 81- 567 N ame T ype Code N o. Qty M emor y c ard in ter face CU -200 00 0-08 1-5 69 1 Cable assy M J- A6SPF/TM 1 1AP 8C05 0 000- 14 6-2 89 1 Cable assy M J-A15 A 3 F0003-030 000-14[...]
-
Page 75
4-1 1 De sktop m ount For des ktop m ount , t he opti onal deskt op mo unt ki t F P03-10201 ( Code N o.: 008-5 39- 530) i s requi red. N ame T ype Code N o. Qty M ountin g brac ke t 19-0 23- 3081-0 10 0- 316- 2 50 1 Sel f-t a ppi ng s cr ew 5x2 0 00 0-80 2-081 4 Scr ew M 4x10 00 0-88 1- 145 4 1. Put the m ounti ng bracket 1 9-02 3-30 81 on t he uni[...]
-
Page 76
4-12 T his p age i s intent ional ly lef t bl ank.[...]
-
Page 77
NAME OUTLINE Q'TY DESCRIPTION/CODE № PACKING L IST 19AM-X-9851 -6 RDP-138/139 [E] 1/1 NAME OUTLINE Q'TY DESCRIPTION/CODE № ユニット UNI T 指示部 DISPLAY UNIT RDP-138-E-N 000-080-037 1 ** リモコンセット REMOTE CONTROLLER SET リモコンキーユニット REMOTE CONTROLLER RMC-100 000-144-471 1 ?[...]
-
Page 78
A - 2[...]
-
Page 79
PACK ING LI ST PACK ING LI ST PACK ING LI ST PACK ING LI ST 1 9AO-X-985 1 - 1 RSB-0094-075 RSB-0094-075 RSB-0094-075 RSB-0094-075 N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1 / 1 ユニット ユニット ユニット ユニット UNIT UNIT UNI[...]
-
Page 80
A - 4[...]
-
Page 81
A - 5[...]
-
Page 82
[...]
-
Page 83
A - 7[...]
-
Page 84
[...]
-
Page 85
PACKING LIST 19AN-X-9851 -1 PSU-005 N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 空中線電源部 POWER SUPPLY UNIT PSU-005 000-080-190 1 予備品 SPARE PARTS SP03-14001 ヒューズ FUSE FGBO 7A AC125V 000-549-013 3 ヒューズ FUSE FGBO 15A AC125V 000-549-014 3 工事材料 INSTALLAT[...]
-
Page 86
Y. Hatai D-1[...]
-
Page 87
Y. Hatai D-2[...]
-
Page 88
Y. Hatai D-3[...]
-
Page 89
Y. Hatai D-3A[...]
-
Page 90
Y. Hatai D-4[...]
-
Page 91
Y. Hatai D-5[...]
-
Page 92
Y. Hatai D-6[...]
-
Page 93
Y. Hatai Yoshitosh i Hatai 電子署名者 : Yoshitoshi Hatai DN: cn=Yoshitoshi Hatai, o=Furuno, c=JP 日付 : 2003.09.10 09:55:47 +09'00' 署名 は無 効で す D-7[...]
-
Page 94
Y. Hatai Yoshitosh i Hatai 電子署名者 : Yoshitoshi Hatai DN: cn=Yoshitoshi Hatai, o=Furuno, c=JP 日付 : 2003.09.10 09:55:47 +09'00' 署名 は無 効で す D-8[...]
-
Page 95
Y. Hatai Yoshitosh i Hatai 電子署名者 : Yoshitoshi Hatai DN: cn=Yoshitoshi Hatai, o=Furuno, c=JP 日付 : 2003.09.10 09:55:47 +09'00' 署名 は無 効で す D-9[...]
-
Page 96
FURUNO ELECTRIC CO., LTD. 相互結線図 INTERCONNE CTION DIAG RAM 船舶用レーダー MARINE RADAR MODEL 1833C NAME TYPE 名称 kg DRAWN CHECKED APPROVED DWG.No. SCALE MASS 12 45 6 3 B A D C *1. SHIPYARD SUPPLY NOTE *2. CONNECTOR PLUG FITTED AT FACTORY. *3. SHIELD SHOULD BE EFFECTIVELY GROU NDED AT BOTH UNIT ENDS. 19-022-0006- 3 K.MIYAZAWA TAKA[...]
-
Page 97
FURUNO ELECTRIC CO., LTD. NAME TYPE 名称 kg DRAWN CHECKED APPROVED DWG.No. SCALE MASS 12 45 6 3 B A D C NOTE *2. CONNECTOR PLUG FITTED AT FACTORY. *3. SHIELD SHOULD BE EFFECTIVELY GROU NDED AT BOTH UNIT ENDS. MODEL 1823C 船舶用レーダー MARINE RADAR 相互結線図 INTERCONNE CTION DIAG RAM 03-161-6001-1 K.MIYAZAWA TAKAHASHI.T DJ1 *2 P/L A [...]
-
Page 98
FURUNO EL ECTRIC CO., LT D. 12 45 6 3 B A D C 相互結線図 INTE RCO NNE CTION DI AG RAM 船舶用レーダー MARI NE RAD AR MODE L 1 933 C/194 3C NAME TYPE 名称 kg DRAWN CHECKED APPROVE D DWG.No. SCALE MASS 19-022-0007- 3 2 1 (+) (-) クロ BLK シロ WHT 3 GND J1351 19S1004,0 .5m OP03-174, MAX.30m 4 3 2 1 5 6 CLK-H CLK-C NC DATA-H /HDG-H DAT[...]
-
Page 99
FURUNO EL ECTRIC CO., LT D. 12 45 6 3 B A D C 19S1004,0 .5m 5 4 3 2 1 6 7 +12V SHIELD GND *2 DATA1 J1356 5 4 3 2 1 6 *2 J1355 DATA2 TD2-A TD2-B RD2-A RD2-B NC SHIELD 19S1021, 0.5m シロ クロ ミド キ WHT BLK YEL GRN 4 3 2 1 5 6 CLK-H CLK-C *2 NC DATA- H/HDG-H DATA- C/HDG-C SHIEL D DATA3 J1354 シロ クロ ミド キ WHT BLK YEL GRN RD3-B RD3-[...]
-
Page 100
名称 TITLE NAME D A B C 23 1 MASS DRAWN CHECKED APPROVED SCALE DWG.No. kg ±10% 相互結線図 INTERCONNE CTION DIAG RAM GD-1900C カラービデオプロッタ COLOR VIDEO PL OTTER 19-022-0008- 1 C4411-C01- G TAKAHASHI.T K.MIYAZAWA 2 1 (+) (-) クロ BLK シロ WHT 3 *2 MJ-A3SRMD GND J1351 19S1004,0.5m 4 3 2 1 5 6 CLK-H CLK-C *2 NC MJ-A6SRMD [...]