Furuno FS-5070 manual

SSB RADIO TELEPHONE FS-1570 FS-2570 FS-5070 OPERA T OR'S MANU AL www .fur uno .co .jp MODEL[...]

The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A : NOV 2006 . Printed in Japan All rights reserved. C2 : JUL . 17, 2008 Pub. No. OME-56560-C2 * 00016050112 * * 00016050112 * ( TATA ) FS-1570/2570[...]

i IMPORT ANT NOTICE • This manual is intended for use by native spea k ers of English. • No part of this manual may be copied or rep r oduced w it hout written permission. • If this manual is lost or worn, contact your dealer about replacement. • The contents o f this manual and equipment speci f ications are subject to change without notic[...]

ii SAFETY INSTR UCTIONS The user and installer must read the appropriate saf ety instr uctions bef ore attempting to install or operate the equipment. WARNING WARNING DANGER Never touch the SSB antenna, antenna coupler or lead-in insulator when the SSB radiotelephone is transmitting. High voltage which will cause death or serious injury is present [...]

iii WARNING To avoid electrical shock, do not remove cover. No user-serviceable parts inside. Name: Warning Label (1) Type: 86-003-1011 Code No.: 100-236-231 CAUTION Do not remove any safety label. If a label is missing or damaged, contact a FURUNO agent or dealer about replacement. WARNING LABEL(S) WARNING Do not operate the [DISTRESS] button exce[...]

iv DISTRESS ALERT MESSAGE PROCEDURE Below is the procedure f or transm itting a distress alert via radi otelephon e. T r ansmit the distress alert w h en a life-enda ngering situatio n occurs on your vessel. 1. Open the DISTRESS button cover and press the DISTRESS butt on more than f our seconds to show the f ollowing display , t hen release the DI[...]

v CANCELING DI STRESS ALERT Y o u can cancel the distr ess call while it is being sent or while waiting for its acknowledgem ent as follows. 1. Press the CA NCEL key . W hen the following message app ears, do the f ollowing. TIME TO GO : 0S NATURE: UNDESIGNATED POS: 12 34.5678N 123 45.6789E DSC FREQ : 2187.5 kHz Distress Proc. is Paused. RESUME RES[...]

CANC ELLING DI STRESS ALER T vi 4. Communicat e, via radiot elephone, with the coast station. NATURE: UNDESIGNATED POS: 12 34.5678N 123 45.6789E Send cancel msg. by voice on 2182.0 kHz. Push any key: Go next step. *2M-2187.5 kHz 8M-8414.5kHz 4M-4207.5kHz 12M-12577.0kHz 6M-6312.0kHz 16M-16804.5kHz Asterisk marks the frequency over which the cancella[...]

vii T ABLE OF CONTENTS FOREWORD ...................................................................................................... xii SYSTEM CONFIGU RA TION S ........................................................................... xiv 1. OPER A T IONAL OVERVIEW ......................................................................... 1-1 1[...]

T ABLE O F CONT ENTS viii 3.4.2 Send calls ....................................................................................................... 3-5 4. DISTRESS OPER A TIONS ............................................................................ 4-1 4.1 Sending Distres s Alert .................................................................[...]

T ABLE O F CONTE NTS ix 6. MENU OPER A TION ...................................................................................... 6-1 6.1 Adju sting Ha ndset V olu me ......................................................................................... 6-1 6.2 Noi se Bla nker ....................................................................[...]

T ABLE O F CONT ENTS x 8.3.2 Edi ting/Del eting timer p rograms ...................................................................... 8-6 8.4 User Channel s .......................................................................................................... 8-6 8.4.1 Registering use r channels ................................................[...]

T ABLE O F CONTE NTS xi 11 . M AINTENANCE & TROUBLE SHOOTIN G .......................................... 1 1-1 11 . 1 Radiotelephone T est ................................................................................................ 1 1-1 11 . 2 Maintenanc e ....................................................................................[...]

xii FOREWORD Thank you for purchasi ng the FS-1570/ 2570/5 070 SSB Radiot elephon e. We are confident you will discover why FURUNO has becom e synonymous with qualit y and reliabilit y . Dedicated in the desig n and m anufacture of m arine electronics equipment for 60 years, FURUNO Electr ic Company has gained an unri valed reputation as a world le[...]

FOREW ORD xiii DSC/w atch receiver • Distress, urgency , safety and routine calling • Scanning of DSC frequencies for distress and general calls on M F/ HF • File editing capability for readiness in case of eme rg ency • PSTN (Public Switched T elephone Network) c apability s t andard • Log stores 50 each o f latest ordinary , distress an[...]

xiv SYSTEM CONFIGURA TIONS FS-1570 S tandard configuration i s shown with solid line. 100-115/200-230V AC 1 φ , 50/60Hz 24VDC INCOMING INDICA T OR IC-303-DSC EPFS (GNSS) A C/DC POWER SUPPL Y UNIT PR-300 PREAMP UNIT F AX-5 ANTENNA COUPLER A T -1560-15 DISTRESS ALERT UNIT IC-302-DSC PO WER ST A TUS MONIT OR PSM-01 Preamp Unit Exposed to weather Ante[...]

SYST EM CONFIG URA TIO NS xv FS-2570 S tandard configuration i s shown with solid line. CONTROL UNIT FS-2571C DC24V # CONTROLLER 1 CONTROLLER 2 W/R BOARD # 100-115/200-230V AC 1 φ , 50/60Hz 24VDC INCOMING INDICA T OR IC-303-DSC EPFS (GNSS) A C/DC POWER SUPPL Y UNIT PR-850A PREAMP UNIT F AX-5 ANTENNA COUPLER A T -1560-25 DISTRESS ALERT UNIT IC-302-[...]

SYST EM CONFIG URA TIO NS xvi FS-5070 S tandard configuration i s shown with solid line. # CONTROLLER 1 CONTROLLER 2 W/R BOARD # 100-115/200-230V AC 1 φ , 50/60Hz 24VDC INCOMING INDICA T OR IC-303-DSC EPFS (GNSS) A C/DC POWER SUPPL Y UNIT PR-850A PREAMP UNIT F AX-5 ANTENNA COUPLER A T -5000 DISTRESS ALERT UNIT IC-302-DSC POWER ST A TUS MONIT OR PS[...]

1-1 1. OPERA TIONAL OVER VIEW 1.1 Controls Description of controls Control Functi on P W R/VOL k nob • Tu rns the power on/of f . • Adj usts vo lum e. DISTRESS button Press and hold down the button m ore than f our (4) seconds t o transmit the distress alert. CALL key T ransmits DSC messages. ENTER k nob Rotate to choose menu item s; push to re[...]

1. OPER A TIONAL OVER V IEW 1-2 7/ key Tu rns loudspeaker on/off. (Note that this key does not silence the distress or urgency alarm.) 8/PRINT key Prints communications log files, current screen (except DSC standby screen and radiotelephone screen) a nd test results. 9/ key Adjusts p anel dimmer and LCD contrast. */FILE/CURSO R key • Opens the se[...]

1. OPER A TIONAL OVER V IEW 1-3 Indication Meanin g CH Channel Tx TX frequency ( Tx : while transm itting) Rx RX fr equency Blinks when there are m essages not read yet. DR/DS DR: Distress received, DS: Distress sent S peaker on/off SSB/TLX/AM Class of Emission SIMP/SDUP/DUP Co m munication m ode (SIMP: sim plex, SDUP: se m i-duple x, DUP: f ull-du[...]

1. OPER A TIONAL OVER V IEW 1-4 1.5 Control Unit Dimmer , Contra st Y o u can adjust t he dimmer and contrast of the control unit. 1. Press the 9/ key to sho w the dimm er/contrast adj ustment window . EXIT:[CANCEL] 6 45 DIMMER (1~8) CONTRAST (40~63) 2. Rotate the ENTER knob to choose DIMMER or CONTRAST , whichever you want to adjust, and then push[...]

1. OPER A TIONAL OVER V IEW 1-5 1.8 Setting for A u to A cknow ledgement Individual, position, pol ling and test calls can be acknowledged autom aticall y or manually . Press the 5/ACK/SQ key to s witch the acknowledge m ode bet ween autom atic and manual alternately . The message AUTO ACK or MANUAL ACK appears on the DSC standby screen with each p[...]

1. OPER A TIONAL OVER V IEW 1-6 • The other control unit in two controls unit system g oes ON HOOK. • NBDP st ops scanning or communicating. 1.9.4 Automatic setting of w orking frequenc y The radiotele phone aut omatically sets w o rking f requency in the f ollowing conditio ns: • ABLE ACK is sent in r esponse to indiv idual call. • Y our s[...]

2-1 2. SSB RADIOTELEPHONE Y o u can use the SSB comm unication in the RT (radiotelephone) m ode. Press the RT/CH key to show the R T screen. 2.1 Choosing Class of Emission There are three em ission modes, SSB, TLX and AM. •SSB: Single Sideband •TLX: T elex (see chapter 7 t o 10.) •AM: AM (Y ou cannot transm it in the AM mode.) At the radiotel[...]

2. SSB R ADIOTELE PHONE 2-2 2.2 Choosing Channel, Frequency Choose the channel or t ransm itting f requency to use f or the SSB. This setting can be done both when the ha ndset is on and off hook. Note: T o set the SSB radiotelephon e to 2182 kHz/J3E, press the RT/CH key more than f ive seconds. Choosi ng channel 1. Rotate the ENTER knob to choose [...]

2. SSB R ADIOTELE PHONE 2-3 Choosi ng frequency 1. Rotate the ENTER knob to choose T x or Rx as appropriate and then p ush the ENTER knob. SSB SIMP HIGH FAST NB SQ SE N S IA 10.0A MMSI xxxxxxxxx 35 00.0000N 135 00.0000E UTC 00:00 EPFS 23:59 CH: 200 Tx: 2182.0 kHz Rx: 2182.00 kHz 2182.00 2. Enter f requenc y by one of the m ethods belo w . Entering [...]

2. SSB R ADIOTELE PHONE 2-4 completed, T UNE: OK appears. If tuning f ails, TUNE: NG appears. 2. Hold the handset close to your mout h, press the PTT switch and speak clearly . Note: W hen tuning is initiated in t he two control units system , the display of the idle control unit shows “OCCUPIED(ANO THER CONTROLLER).” I n this case, only the DI[...]

2. SSB R ADIOTELE PHONE 2-5 Checking the transmittin g power During transm ission, t he IA bar def lects according to the current being fed to t he antenna feeder f rom the antenna coupler . The unit of readout is amperes. The antenna current varies with the effect ive antenna impedance. The reading differs by the frequency and antenna lengt h. The[...]

2. SSB R ADIOTELE PHONE 2-6 2.4.3 Receiving A M br oadcasting st ations 1. Press the RT key to sho w the radiotelephon e screen. 2. Rotate the ENTER knob to choose emission mode and then p ush the EN TER knob. AGC mode SSB SIMP HIGH FAST NB SQ SE N S LA 10.0A MMSI xxxxxxxxx 35 00.0000N 135 00.0000E CH: 200 Tx: 2182.0 kHz Rx: 2182.00 kHz UTC 00:00 E[...]

2. SSB R ADIOTELE PHONE 2-7 2.5 When A utomatic T uning Fails The antenna cou pler autom atically tunes a wire or whip antenna transce iver . W hen all frequencies cannot be tuned, TUNE: OK will not appear on the display . In this case, you can tune 2182 kHz by m anually operati ng the coupler as sho wn below . DANGER HIGH TENSION HAZARD DO NOT TRA[...]

2. SSB R ADIOTELE PHONE 2-8 2.6 User Ch annels The USER CH menu provides f or registration of user TX and RX channels, where permitt ed by the Aut horities. The user channel in t he System set up menu must be enabled in ord er to register user channels. F or furt her details, contact your dealer . See section 6.4 t o register . NOTICE FURUNO will a[...]

3-1 3. DSC OVER VIEW 3.1 What is DSC? DSC is an acronym meaning Digital Select ive Calling. It is a digital distress and general calling system in t he MF and HF bands used by ships for tr ansmitting distress alerts and general calls and by coast stations for transm itting the associated ack nowledgem ents. For DSC distress and saf ety calling in t[...]

3 . DSC OVERVIEW 3-2 Content s of a DSC ca ll Calling category Call ca tegory Call DISTRESS Dist ress Alerts, Distress relay area, Distress relay coast GENERAL Individual, PSTN message, T est message, Group messa g e, Area message, Position, Medical Transport, Nautical Craft, Polling message S ta tion ID Own ship ID and sendin g station ID. Coast s[...]

3. DSC O VERVI EW 3-3 3.3 A udio A larms W hen you receive a distress alert or routine call addressed to your ship, the audio and visual alarm s are released. For the dist ress or urgency call, the audio al arm sounds unt il the CANC EL key is pressed, and sounds f or one minut e and then autom atically goes off in case of ot her calls. The tone of[...]

3. DSC OVERVIEW 3-4 3.4 Interpreting Ca ll Displays This paragraph provides the inf ormat ion necessary for interpreting receive and sen d call displays. 3.4.1 Receiv e calls Below are sam ple distress and individual rece ive calls. The content of ot her types of receive calls is sim ilar to that of t he individual call. Distress recei ve call * Re[...]

3. DSC O VERVI EW 3-5 Indi vidual recei ve call * Received message * View message MAR-11-2006-23:59 INDIVIDUAL REQUEST SENDER ID: 123456789 PRIORITY: ROUTINE TX: 2222.2 kHz RX: 2222.2 kHz TELEPHONE 10M10S COMM FREQUENCY TX: 2222.2 kHz RX: 2222.2 kHz ACKNOWLEDGEMENT REQUIRED ERROR-CHECK: OK BACK TO RECEIVED VIEW Date and time of message ID No. of se[...]

3. DSC OVERVIEW 3-6 Indi vidual send call COMM. FREQ : 2078.0kHz PRIORITY : ROUTINE COMM. MODE : TELEPHONE MSG TYPE: INDIVIDUAL STATION ID: 123456789 GO TO VIEW DSC FREQ : 2M-INTL Push ENTER knob to switch. View message BACK TO COMPOSE VIEW DSC FREQUENCY TX: 2177.0 KHZ RX: 2177.0 KHZ COMM FREQUENCY TX: 2222.2 kHz RX: 2222.2kHz ACKNOWLEDGEMENT REQUI[...]

4-1 4. DISTRESS OPERA TIONS Distress operati on o verview 1. Press the DIST RESS button. 2. Wa it f or the distress alert acknowledgem ent. 3. Communicat e with the coast stat ion. Coast Station Own Ship (1) Ship in Distress (Own Ship) (3) (2) (2) (3) (1) Ship in distress sends Distress Aler t (2) Coast station sends distress ackno wledgement (DIST[...]

4. DISTRESS OPERATIONS 4-2 4.1.1 Sending distress alert by DISTRESS bu tton, nature o f distress not specified 1. Open the DIST RESS button cover and press and hold do wn the DISTRESS but ton more than f our seconds. The button flashes in r ed and the buzzer sounds ra pidly . The display shows the contents of the dist ress alert call: your ship’s[...]

4. DIS TRESS OP ERA T IONS 4-3 At this time, t he equipment cannot recei ve any calls except the distress alert acknowledge call. T he distress alert you sent is recorded in t he TX log. Wait for distress acknowledgement. TIME TO GO: 2M10S RESENDING NATURE: UNDESIGNATED POS : 12 ° 34.0000N 123 ° 45.0000E AT 12:34 TELEPHONE 2182.0 kHz DSC FREQ : 2[...]

4. DISTRESS OPERATIONS 4-4 4.1.2 Sending distress alert by DISTRESS bu tton, nature o f distress spec ified If you have the t ime to designate the nature of distress, send the distress alert as f ollows: 1. Open the DIST RESS button cover and press the DISTRESS butt on momentarily to show the follo wing display . MSG TYPE :Undesignated POS. COMMTYP[...]

4. DIS TRESS OP ERA T IONS 4-5 8. Push the ENTER knob to open the longit ude input window . 9. Use the numeric keys to ent er longitude (in ni ne digits). (If necessary , s witch coordinates: 1 key to sw itch to East; 2 key to switch to West.) Push the ENTER knob. INPUT TYPE: MANUAL LAT: 34 41 NORTH LON : 135˚ 30 EAST TIME: 09: 00 UTC LAT : 35 ° [...]

4. DISTRESS OPERATIONS 4-6 The display changes as below (exam ple). Compose msg. NATURE : FLOODING POS: 35 ° 00 . 0000 N 135 ° 00.0000E AT 12:34 DISTRESS MSG TYPE : COMM MODE : TELEPHONE DSC FREQ : 2187.5 kHz GO TO VIEW 16. Press the DISTRESS butt on more than four seconds to send the dist ress alert. Distress alert message in progress! TIME TO G[...]

4. DIS TRESS OP ERA T IONS 4-7 4.2 Re cei v ing a Dist ress Alert W hen you receive a distress alert from a ship in dist ress, the audio alar m sounds and the message “Distress alert m essage received. ” Appears on the displa y . Press the CANCEL key to silence the audi o alarm . Wait f or the distress acknowledge call f rom a coast station. If[...]

4. DISTRESS OPERATIONS 4-8 A c tion for ship receiving distres s alert on MF band Press CANCEL ke y to silence alar m. DSC Distress aler t received. Listen on 2182 kHz f or 5 minutes. Did you receiv e ackno wledge from CS and/or RCC? Is own v essel able to aid ship in distress? No Is distress traffic in progress? No Is the DSC distress call continu[...]

4. DIS TRESS OP ERA T IONS 4-9 Sendi ng the distress a cknow ledge cal l to ship in distress (on MF band) Note: Y ou cannot send the distress ackno wledge call f or five minutes because of receiving the distress acknowledg ement f rom the coast station. T ransm it the distress acknowledge cal l to the ship in distress onl y when you do not receive [...]

4. DISTRESS OPERATIONS 4-10 5. Rotate the ENTER knob to choose ACKNOW LEDGE and then push the EN TER knob. The follo wing display appears. MSG TYPE : DISTRESS ACK SHIP ID IN DIST : 123456789 DSC FREQ : 2187.5 kHz Compose msg. GO TO VIEW MSG TYPE : DISTRESS ACK SHIP ID IN DIST : 123456789 DSC FREQ : 2187.5 kHz Compose msg. GO TO VIEW Ack should be B[...]

4. DIS TRESS OP ERA T IONS 4-1 1 W hen receiving a DSC message, the f ollowing message m ay appear . After 10 seconds passed or when "Agree" is chosen, the working frequency is changed with the message shown below. Choose "Pause". Accept New Working Freq CANCEL: CLOSE WINDOW Choose "Agree". Change COM Frequency Agree D[...]

4. DISTRESS OPERATIONS 4-12 Sending the distress rel ay to coast st ati on (on HF b and) The audio alarm sounds and the displa y changes as below when a distress call is recei ved. DISTRESS CALL SHIP ID IN DIST: 123456789 NATURE: UNDESIGNATED POS: 12 34.0000N DIST: 43nm 123 45.0000E AT 12:34 TELEPHONE 8291.0 kHz Distress alert message received! CAN[...]

4. DIS TRESS OP ERA T IONS 4-13 6. Push the ENT ER knob t o open the DSC FREQ. Menu. GO TO EASY VIEW DSC FREQ KHZ GO TO VIEW Compose msg. COAST SHIP COAST ID: SHIP ID IN DIST: MSG TYPE: RELAY ALL 4207.5 6312.0 12577.0 16804.5 2187.5 8414.5 7. Choose appropriat e frequenc y and then push the ENTER knob. Y ou should f irst choose 8414.5 kHz. 8. Press[...]

4. DISTRESS OPERATIONS 4-14 4.3 Sendi ng Distress Relay on Behalf of a Ship in Distress 4.3.1 Sending distress relay to coast st ation Y o u may send the distress relay to a coast station on behalf of a ship in distress in the follo w i ng cases: Y o u are near the ship in distress and the ship in distress cannot transm it the distress alert. W hen[...]

4. DIS TRESS OP ERA T IONS 4-15 6. Push the ENTER knob to open the SHIP ID IN DIST w ind ow . MSG TYPE: NA TURE : UNDESIGNA TED POS.: COMM MODE : TELEPHONE DSC FREQ : 8414.5 kHz GO TO VIEW RELA Y COAST : --------- : NO INFORMA TION SHIP ID IN DIST COAST ID: Compose msg. SELECT MANU AL 7. Choose MANUAL or SELECT , and then push th e ENTER knob. W he[...]

4. DISTRESS OPERATIONS 4-16 12. Enter posit ion of ship in dist ress, following 1), 2) or 3) below . 1) For automatic input, push t he ENTER knob and choose EPFS. Then push ENTER knob and go to step 13. 2) For manual input, pu sh the ENTER knob to open the INPUT T YPE menu, rotate the ENTER knob to choose M ANUAL and then push the ENTER k nob. Ente[...]

4. DIS TRESS OP ERA T IONS 4-17 17. Press the CALL key for three seconds, and the m essage “Priority distress transm it sure?” appears. Contin ue pressing the key unti l the displa y shows “Distress relay coast message in progress! ” to send the distress relay call. Distress relay coast message in progress! DSC FREQ : 8414.5 kHz DESTINATION[...]

4. DISTRESS OPERATIONS 4-18 4.3.2 Sending distress relay t o area ship s Use this procedure to send the distress rela y to area ships. 1. Press the DSC key . Select Message PSTN MESSAGE TEST MESSAGE GROUP MESSAGE AREA MESSAGE POSITION RELAY AREA RELAY COAST DISTRESS SPECIAL INDIVIDUAL GENERAL DISTRESS MMSI 123456789 POS 12 34.5678N 123 45.6789E UTC[...]

4. DIS TRESS OP ERA T IONS 4-19 7. Push the ENTER knob to open t he NA TURE menu. MSG MYPE SHIP ID IN DIST :Undesignated POS: ION. COMMYPE DSC FREQ : All ships : 987654321 : : NATURE FIRE FLOODING COLLISION GROUNDING LISTING  UNDESIGNATED Compose msg. AREA: DISABLED ABANDONING PIRACY MAN OVERBOARD  SINKING 8. Rotate the ENTER knob to choose n[...]

4. DIS TRESS OPER A TION S 4-20 13. Push the ENTER knob t o open the DSC FREQ m enu. GO TO EASY VIEW DSC FREQ KHZ GO TO VIEW Compose msg SHIP ID IN DIST: 123456789 POS: 34 ° 45N COMM MODE: MSG TYPE: RELAY ALL 4207.5 6312.0 12577.0 16804.5 2187.5 8414.5 NATURE: UN AREA: 14. Rotate t he ENTER knob to choose appropriat e frequency a nd then push the [...]

4. DIS TRESS OP ERA T IONS 4-21 4.4 Re cei v ing Distre ss Relay from Coas t St ation Y o ur ship receives the dist ress relay when: • the coast station sends the distr ess r elay to your ship. (DISTRESS RELA Y COAST) • the coast station sends the distr ess r elay to the area w here you are navigating. W hen you receive a distress relay message[...]

4. DISTRESS OPERATIONS 4-22 2. Choose CANCEL an d push the EN TER knob t o cancel the distress call. TIME TO GO : 0S NATURE: UNDESIGNATED POS: 12 34.5678N 123 45.6789E DSC FREQ : 2187.5 kHz Warning: Distress Cancel Step YES NO 3. Rotate the ENTE R knob to choose YES, and t hen push the ENTER knob to sho w t he follo w i ng screen. The screen shows [...]

5-1 5. ROUTINE MESSAGE CALLING , RECEIVIN G Operati on overview The follo wing shows about the indi vidual m essage as exam ple of the routine m essage. The individual ca ll is for sending a call to a specific stat ion. 1. Send the individua l message. 2. Wa it for the individual m essage acknowledgem ent. 3. S tart the communication. Coast Station[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-2 3. Push the ENT ER knob t o open the ST A T ION ID menu, and t hen rotate the ENTER knob to choose MANUAL or SELECT . 4. For SELECT , you can choose an ID from the message file list stored. 5. For MANUAL, use the num eric keys to key in the ID of t he station where to send the call and then push the ENT[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-3 1 1. Rota te the ENTER knob to choose comm unication f requency setting method desire d and then push the ENTER knob. For FREQUENCY and CHANNEL, see “How to Set Working Frequency , Channel” o n the next page. NO INFO and POSITION let the receiving station set t he working frequency . Ch oose NO INFO[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-4 How to Set DSC Frequen cy 1. Rotate the ENTER knob to choose DSC FREQ and then push the ENTER knob. GO TO VIEW MSG TYPE: INDIV STATION ID: 123456 PRIORITY: RO COMM MODE: TELEP COMM FREQ: NO I DSC FREQ : 2M-INTL 16 MHZ 18 MHZ 22 MHZ 25 MHZ  6 MHZ 8 MHZ  12 MHZ 4 MHZ 2 MHZ Compose msg. p Rotate the [...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-5 13.Press the CALL key to send t he individual call ( transm ission tim e: about seven seconds). The display shows the m essage “Individual rou tine message in progres s!” while the call is being sent. Individual routine message in progress! TIME TO GO: 7S DESTINATION ID: 123456789 DSC FREQ : 2177.0 [...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-6 Able ackno wl edge call recei ved Communicat ing by radioteleph one 1. Press t he CANCEL key to silence t he audio alarm, and the display changes as belo w . MAR-23-2006-23:59 ABLE ACKNOWLEDGE SENDER ID: 123456789 PRIORITY : ROUTINE TX:2138.0kHz TELEPHONE RX: 2138.0kHz * Received message * GO TO VIEW 10[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-7 No re sponse! T ry c alling again? Re-send call : Push th e ENTER knob f ollowed by pressing the CALL ke y . Cancel cal l: Press the CANCEL key to go to DSC screen. 5.1.2 Receiving an indiv i dual call Acknowledgem ent is able or unable dep ending on t he comply-type sett ing (see section 6.1 1). The re[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-8 * Xmitted message * MAR-23-2006-23:01 ABLE ACKNOWLEDGEMENT DESTINATION ID: 10M10S PRIORITY : ROUTINE TX: 2138.0 kHz TELEPHONE RX: 2138.0 kHz RESEND 123456789 GO TO VIEW 2. Press t he CANCEL key . Y ou can no w comm unicate with the party , o ver the radiotelepho ne fr equency specified or by the N BDP t[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-9 * Xmitted message * JUL-23-2006-23:01 UNABLE ACKNOWLEDGE RESEND BUSY DESTINATION ID : 121234567 PRIORITY : ROUTINE 10M10S GO TO VIEW 2. Push the ENT ER knob t o confirm the m essage. 3. Rotate the ENTER knob to scroll the message. Manua ll y ackno w ledgi ng individual call with “ABLE” W hen an indi[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-10 DSC FREQ: 4 M-INTL STATION ID: 121234567 COMM FREQ: CH401 MSG TYPE: ABLE ACKNOWLEDGEMENT Compose msg. GO TO VIEW COMM MODE: TELEPHONE 5. Press the CALL key to send the acknowledge call. The display changes as belo w . Able acknowledge message in progress! TIME TO GO : 7S DSC FREQ : 4208.0 kHz DESTINATI[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-1 1 INDIVIDUAL REQUEST SENDER ID: 121234567 PRIORITY: ROUTINE TELEPHONE CH 401 * Received message * ANSWER MAR-23-2006-23:00:00 To view contents, rotate ENTER knob to choose GO TO VIEW and then push the ENTER knob. 10M10S GO TO VIEW 2. Rotate the ENTER knob to choose ANSW ER and then push the ENTER knob. [...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-12 The timer counts dow n the tim e remaining until the call is co m pleted (transmission time: about seven seconds) . 8. Press the CA NCEL ke y twice to show the radiot elephone screen. 5.2 Group Call A group call is for calling a specif ic group by specif ying its group ID. 5.2.1 Sending a group cal l 1[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-13 MSG TYPE : GROUP MESSAGE COMM FREQ COMM MODE : TELEPHONE PRIORITY : ROUTINE GROUP ID : 012345678 DSC FREQ : 2M-INTL GO TO ALL VIEW CHANNEL FREQUENCY GO TO VIEW Compose msg. 8. Rotate the ENTER knob to choose communication f requency desir ed and then push the ENTER knob. (See page 5-3 for details.) NO [...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-14 Sendi ng message by NBDP T er minal Un it The message “ST A T ION ENTRY COMPLETED FROM DSC. Press any key to escape.” Appears on the NBDP’s display . 1. Press any key on the NBDP T erminal Unit to erase the m essage. 2. Press the function key F3 on t he keyboard of the NBDP T erm inal Unit to sho[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-15 After 10 seconds passed or when "Agree" is chosen, the working frequency is changed with the message shown below. Choose "Pause". Accept New Working Freq CANCEL: CLOSE WINDOW Choose "Agree". Change COM Frequency Agree Disagree Count down has been paused. Change COM Frequen[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-16 5.3.1 Sending a geogr aphical area call 1. Press the 2/DSC key . Select Message PSTN MESSAGE TEST MESSAGE GROUP MESSAGE AREA MESSAGE POSITION RELAY AREA RELAY COAST DISTRESS SPECIAL INDIVIDUAL GENERAL DISTRESS MMSI 123456789 POS 12 34.5678N 123 45.6789E UTC 01:53 EPFS 01:54 2. Rotate the ENTER knob to [...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-17 11. Rotate the ENTER knob to choose DSC fr equency desired and then pu sh the ENTER knob. (See “How to Set DSC Frequenc y” on page 5-4 for details.) Y our displa y should now look som ething like one below . MSG TYPE : AREA MESSAGE AREA : 34 ° N 140 ° W ↓ 10 ° → 5 ° PRIORITY : SAFETY COMM M[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-18 1. Press the CANCEL key to silence the alarm . “Change COM Frequenc y” display appears, and the displa y changes as belo w . * Received message * MAR-23-2006-23:59 GEOGRAPHICAL AREA SENDER ID : 123456789 PRIORITY : SAFETY TELEPHONE: 2182.0 kHz GO TO VIEW 10M10S 3. Press the CANCEL key to go to t he[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-19 5.4 Neutral Craf t Call The neutral craft call, which contains own ship position and ID, inform s all ships that your ship is not a participant in armed conf lict. The neutral craft call is necessary the setting on the Setup m enu. See section “6.15 S pecial Messages”. 5.4.1 Sending a neutral craft[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-20 8. Press the CA LL key to send the neutral craft call (transm ission time: approx. 7 sec.). Neutral craft message in progress! PRIORITY: URGENCY TIME TO GO: 7S DSC FREQ : 2187.5 kHz AREA : 34 N 140 W 10 5 9. After the call is sent, press the CANCEL key twice to sho w the radiotelephone scree n. 10. Inf[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-21 2. Press the CA NCEL ke y to go to t he radiotelephone screen. Watch on the working frequency specif ied by radiotel ephone or NBDP . If there is t he difference between the registered f requency and used f requency to rec eive, the f ollowing screens appear . Choose Agree f or the voice comm unicati o[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-22 3. Push the ENT ER knob t o open the AREA m enu and then enter the area range as shown on page 5-17. 4. Push the ENT ER knob t o open the COMM MODE m enu. 5. Rotate the ENTER knob to choose communication type des ired (TELEPHONE or NBDP-FEC) and then push the EN TER knob. 6. Push the ENT ER knob t o op[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-23 6. W hen you have finished sending your me ssage, press the F10 key to disconnect the line. 5.5.2 Receiving a med ical transport call W hen a medical transport call is received, t he alarm sounds and t he display changes as below . SENDER ID: 123456789 PRIORITY: URGENCY TELEPHONE 2182.0 KHZ Medical tra[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-24 Receiving message by NBDP T er minal Unit After receiving a medical transport area call, conf irm the follo wing. The control unit’s display shows “OCCUPIED” and t he T x and Rx frequencies. The m essage from the sending station appears on your NBDP T erm inal Unit. 5.6 Rece i v ing a Polling Req[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-25 5.6.3 Manual rep l y The display changes as shown in the illustrat ion below . The audio alarm sounds when a polling request message is received and the status of the 5/ ACK/SQ key is MANUAL ACK (or AUTO ACK and POLLING MESSAGE in AUTO ACK m enu is OFF). DESTINATION ID : 987654321 PRIORITY: ROUTINE Pol[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-26 5.7 Position Call There are t w o t ypes of position cal ls: other station requires your ship’s position an d your ship requests position of another ship. Finding position of other s t ation Other Station Own Station (1) Position request call (2) Position Information Sending own ship’ s pos ition t[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-27 3. Push the ENTER knob to open the ST A T ION ID menu, and then rotate the ENTER knob to choose MANUAL or SELECT . For SELECT , you ca n choose an ID from the message file list stored. For MA NUAL, key i n ID of station (nine digits) which you want to know its position and t hen push the EN TER knob. M[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-28 One of the following messages appears. “No response! Try calling again?” appears after the time has counted down to z ero, meaning there w as no response from the p art y called. No response! Try calling again? DSC FREQ : 2187.5 KHZ DESTINATION ID: 123456789 PRIORITY: SAFETY Position acknowledge me[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-29 After the call is sent the audio alarm sounds and the displa y below appears. DESTINATION ID: 123456789 PRIORITY: SAFETY POS: 35 ° 30N 135 ° 30E AT 23:54 Position acknowledge message transmitted. CANCEL: STOP ALARM 1. Press the CA NCEL ke y to silence the alarm , and the display changes a s below . M[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-30 3. Rotate the ENTER knob to choose ANSW ER and then push the ENTER knob. Y our display should no w look som ething like the one below . MSG TYPE: POSITION ACKNOWLEDGEMENT POS: 35 00 N 135 00 E AT 23:01 DSC FREQ : 2187.5 kHz GO TO VIEW Compose msg. 4. Confirm the position sho wn and then press the CALL [...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-31 3. Push the ENTER knob to open the COAST ID menu, and t hen rotate the ENTER knob to choose MANUAL or SELECT . For SELECT , you ca n choose an ID from the message file list stored. For MA NUAL, key i n ID of coast station (seven digits) w it h the num eric keys and then push the ENTER knob. GO TO VIEW [...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-32 1 1. Press the CALL key to send t he PSTN call (transm ission time: about seven seconds). The display shows the follo wing m essage. PSTN request message in progress! TIME TO GO: 7S DESTINATION ID : 001234567 TEL NO. : 1234567890123456 DSC FREQ : 12577.5 kHz One of the following three displays appears.[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-33 Then, one of the following displ ays appears. PSTN connected. DSC FREQ : 12577.5 KHZ DESTINATION : 001234567 TEL NO. TELEPHONE: 2222.2kHz : 1234567890123456 PSTN end of message in progress! TIME TO GO: 8S DESTINATION : 001234567 TEL NO. : 1234567890123456 DSC FREQ : 12577.5 KHZ PSTN call connected PSTN[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-34 The tim er counts down to zero and then the follo wing display appears. Pick up the handset or press CALL key. TIME TO GO: 60S RESENDING DESTINATION ID : 001234567 TEL NO. TELEPHONE: 2222.2kHz : 1234567890123456 DSC FREQ : 4208.0 KHZ 1. Pick up the handset or press the CALL key within one m inute. PSTN[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-35 5.8.3 PSTN call d i sconnection, re c ei ving charge information (ship disconnects li ne) 1. After hanging up t he handset or pressing the CA NCEL key to complete y our call, the display sho ws the following m essage. PSTN end of message in progress! TIME TO GO: 8S DESTINATION ID : 001234567 TEL NO. : [...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-36 5.8.4 PSTN call d i sconnection, re c ei ving charge information (coast st ation disconnect s line) The PSTN line is discon nected by the coast station when it finds no evid ence of communications or t he land subscriber hangs u p. The coast station then sends charge inform ation as below . CHARGE INFO[...]

5. ROUTI NE MESSAG E CALLI NG , RECE VING 5-37 2. Rotate t he ENTER knob to choose desired log and pus h the ENTER knob. For exam ple, choose the RECEIVED DIST RESS log and then push the EN TER kn ob. 3. Rotate the ENTER knob to scroll the log. Asterisk indicates unread m essage. Scroll with the ENTER knob. * Rcvd distress log * 02.APR-10-19:56 DIS[...]

5. ROU TINE MES SAGE CALLI NG , RECEVI NG 5-38 This page is intentionall y left blank.[...]

6-1 6. MENU OPERA TION The m enu, consisting of main m enus, provides access t o less-often used function. It can be accessed from both the R T and DSC screens. 1. Press the #/SET UP key to show the main m enu. MENU DATE/TIME MEM CLR USR SETUP SYS SETUP HS. VOL 32 NB ON SQ 2000Hz USER CH MESSAGE POSITION 2. Rotate the ENTER knob to choose USR SETUP[...]

6. MENU OPERA T ION 6-2 6.2 Noise Blan ker The noise blanker f unctions to remove pulse noise. Y ou m ay turn it on or off as follo w s. Nor m ally , use i t w ith OFF (defau lt setting). 1. Press t he SETUP key . 2. Rotate the ENTER knob to choose NB. 3. Push t he ENTER knob. 4. Rotate the ENTE R knob to choose ON or OFF as appropriat e, and then [...]

6. MENU OPERA TION 6-3 3. Push t he ENTER knob to open the user channe l options window . *** User ch entry **  MODE: SSB  CH: 2-01 00201. TX: 2111.5 RX: 2111.5 00202. TX: 2222.0 RX: 2222.0 00203. TX: 2333.5 RX: 2333.5 00204. TX: 2444.0 RX: 2444.0 00205. TX: 2555.5 RX: 2555.5 MODE CH FREQ 4. Rotate the ENTER knob to choose MODE and then push [...]

6. MENU OPERA T ION 6-4 6.4.2 Deleting user channel s Dele ting individual us er channels 1. Press the #/SET UP key . 2. Rotate the ENTER knob to choose USER CH and then push the ENTER knob t wice. 3. Rotate the ENTER knob to choose CH and t hen push the EN TER kn ob. 4. Key in the channel num ber to be delet ed, and then push t he ENTER knob. 5. T[...]

6. MENU OPERA TION 6-5 6. Push the ENT ER knob t o open the ST A TI ON ID entry window . * Message file entry MSG TYPE STATION ID COMM MODE COMM FREQ DSC FREQ : INDIVIDUAL : --------- : TELEPHONE : NO INFO : 2M-INTL 000000000 7. Key in ID of coast station or ship station with the numeric keys and the n push the ENTER knob. 8. Push the ENT ER knob t[...]

6. MENU OPERA T ION 6-6 13. Rotate t he ENTER knob to choose appropriat e DSC band and then p ush the ENTER knob. 14. Rotate t he ENTER knob to choose appropriat e DSC frequency a nd then push the ENTER knob. 15. Ent er file name and num ber as shown below . How to En ter File Na me and Num ber 1. Push the ENT ER knob t o open the file nam e entry [...]

6. MENU OPERA TION 6-7 4. Push t he ENTER knob. The display shows the name and file num ber entered. FILE ENTRY * Message file entry If the file name or number exists the message "Duplicate name (number) ! Overwrite OK?" appears. Push the ENTER knob to write over the name, or press the CANCEL key to escape. FURUNO No.001 file entered Go t[...]

6. MENU OPERA T ION 6-8 8. Push the ENTER knob to open the COMM MODE m enu. * Message file entry MSG TYPE: GROUP ID COMM MODE COMM FREQ DSC FREQ GROUP MESSAGE : 012345678 : TELEPHONE : NO INFO : 2M-INTL NBDP-FEC TELEPHONE 9. Rot ate the ENT ER kno b to choose appropriat e comm unications type and t hen push the ENTER knob. 10. Push the ENTER knob t[...]

6. MENU OPERA TION 6-9 6.5.3 Prep aring PSTN c alls 1. Press the #/SETUP key . 2. Rot ate the ENT ER kno b to choose MESSAGE. 3. Push the ENTER knob. 4. Push the ENTER knob to open the MSG TYPE menu. * Message file entry MSG TYPE STATION ID COMM MODE COMM FREQ DSC FREQ : INDIVIDUAL : --------- : TELEPHONE : NO INFO : 2M-INTL INDIVIDUAL PSTN MESSAGE[...]

6. MENU OPERA T ION 6-10 11. Rotate t he ENTER knob to choose appropriate DSC band and then pu sh the ENTER knob. 12. Choose appropriat e DSC frequenc y and then push the ENTER knob. 13. F ollow “How to Enter File Nam e and Number” on page 6-6 to enter file name and number . 6.5.4 Prep aring test c all 1. Press the #/SET UP key . 2. Rotate the [...]

6. MENU OPERA TION 6-1 1 6.5.5 Sending prep ared messages Sending wit hout modifica tion 1. Press t he FILE /CURSOR key at the DSC standby screen to sho w the send m essage file list. Belo w is an e xample of the send message file list. Send message file 001 : FURUNO JAPAN 002 : FURUNO USA 003 : FURUNO UK 004 : FURUNO DENMARK 005 : FURUNO NORWAY 00[...]

6. MENU OPERA T ION 6-12 Deleting all messages 1. Press t he #/SETUP key . 2. Rotate the ENTER knob to choose t he MEM CLR. 3. Rotate the ENTER knob to choose t he MESSAGE FILES. 4. Push t he ENTER knob. 5. Rotate the ENTER knob to choose YES. 6. Push t he ENTER knob. 6.5.7 Printing List of S end Message Files Y o u can print a list of send message[...]

6. MENU OPERA TION 6-13 Note: If, when “Last updated” is EPFS, input fro m the navigator is interrupted, the m essage “EPFS error” appears. If t his occurs, check the navigator . 4. Push t he ENTER knob to show the position m ethod window , a nd then r otate the ENTER knob to choose the EPFS, MANUAL or NO INFO. 5. Press t he ENTER knob. Go [...]

6. MENU OPERA T ION 6-14 6.7 Date a nd Time Setting Set the date and t ime for the system . 1. Press t he #/SETUP key . 2. Rotate the ENTER knob to choose DA T E/TIME. 3. Push t he ENTER knob. ** Date/Time setup SOURCE: INTERNAL DATE: 2008/02/29 TIME: 11:45 UTC SOURCE: Choose INTERNAL or EPFS (using ZDA). DA TE: Enter the date for manual setting. T[...]

6. MENU OPERA TION 6-15 Clearin g received ord inar y l og 1. Rotate the ENTER knob to choose RCVD O RDINARY LOG . 2. Push t he ENTER knob. YES CLEAR RCVD ORDINARY LOG. ARE YOU SURE ? NO 3. Rotate the ENTER knob to choose YES, and push the ENTER knob. Clearing received distress l og 1. Rotate the ENTER knob to choose RCVD DI STRESS LOG . 2. Push t [...]

6. MENU OPERA T ION 6-16 Clearing mess age files 1. Rotate the ENTER knob to choose MESSAGE FILES. 2. Push t he ENTER knob. YES CLEAR MESSAGE FILES. ARE YOU SURE ? NO 3. Rotate the ENTER knob to choose YES, and push the ENTER knob. Clearin g user ch annels 1. Rotate the ENTER knob to choose USER CHANNELS. 2. Push t he ENTER knob. YES CLEAR USER CHA[...]

6. MENU OPERA TION 6-17 **** Alarm setup *** INTERNAL ALARM : OFF POSITION OLDER :4.0 H EXT ALARM : DSTRS/URG OFF 3.0 2.0 1.0 0.5 4.0 ROUTINE ALL OFF DSTRS/URG Default: ON Default: 4.0 hours Default: DSTRS/URG Disables/enables alarm for received Safety and Routine calls. Alarm is output when position is older by the number of hours set here. Sets t[...]

6. MENU OPERA T ION 6-18 6.1 1 Setting the AUT O A C K Deta ils The acknowledgem ent m essage may be sent automat ically when you receive a message which requires acknowl edgem ent. Y ou can also enable or disable it f or position, pol ling and test messages. Not e that the autom atic ackn owledge is autom atically disabled when RX call contains er[...]

6. MENU OPERA TION 6-19 6.12 Printing Messages The Print Out menu enables/disables aut om atic pr inting of all transm itted and recei ved calls and the results of the dail y test. 1. Press the SET UP key . 2. Choose USR SETUP and PRINT OUT in order , and push the ENTER knob to display the Print out set up menu. Default: MANUAL * Print out setup * [...]

6. MENU OPERA T ION 6-20 6.13 Setting Scan F requencies The Scan freq m enu determ ines which DSC routine and distress f requencies to scan. Follow the instructions below to select/dese lect DSC routine and distre ss frequencies to scan. 1. Press the #/SETUP key . 2. Rotate the ENTER knob to choose USR SETUP , and push t he ENTER knob. 3. Rotate th[...]

6. MENU OPERA TION 6-21 Routine frequencies 1. Rotate the ENTER knob clockw ise to shift the cursor to the ROUTINE column. DISTRESS 2M : FIXED 4M : ON 6M : ON 8M : FIXED 12M : ON 16M : OFF ** Scan freq setup * ROUTINE F1 : 2M-INTL F2 : 4M-INTL F3 : 6M-INTL F4 : 8M-INTL F5 : 12M-INTL F6 : 16M-INTL 2. Rotate the ENTER knob to choose t he fr equency b[...]

6. MENU OPERA T ION 6-22 6.14 Key A ssignm ent The 8/PRI NT key can function as a short-key , pr oviding quick access t o a function without opening the m enu. Y ou can program one of t he f unctions listed belo w , and the def ault setting is NONE (short cut function is disabled). • NONE: Not assigned any function. • NB: Noise blanker on/off ?[...]

6. MENU OPERA TION 6-23 6.16 F A X En able/Disable Y o u may enable or disa ble F AX use as follows. This setting is necessary when the f acsimile is connected and used to recei ve. 1. Press t he #/SETUP key . 2. Rotate the ENTER knob to choose USR SET UP , and then push the ENTER knob. 3. Rotate the ENTER knob to choose F AX Rx and then push the E[...]

6. MENU OPERA T ION 6-24 This page is intentionall y left blank.[...]

7-1 7. NBDP SYSTEM OVER VIEW 7.1 T u rning on the NBDP Syste m T urn on the term inal unit and the print er with their respective power s witches. PRINTER PP-510 POWER KEYBOARD TERMINAL UNIT IB-583 Floppy Disk Drive POWER Switch Operating Lamp Switch ~ ` 2 1 34 67 890 - = _+ ) * ( 9* 8 7 ^& $ # @ ! QW E R TY U IO P [ ] {} | ASD F GH J KL: + ;[...]

7. NBDP SYST EM OVER VIE W 7-2 7.2 Description of Equipment 7.2.1 T erminal unit The term inal unit is a visual display incorp or ating a f loppy disk drive, which pro vides for storage of files on floppy disks. T w o m odels ar e availab le, IB-581 (m onochrom e) and IB-583 (color). Controls f or power and adjustm ent of display brilliance a nd co[...]

7. NBDP SYSTEM OVER VIE W 7-3 7.2.2 Keyboard The term inal unit is operated f rom the keyboard, and is alm ost 100% keyboard controlled. Operation is sim plified by the use of menus which you access by pressing a f unction key , labeled F1-F 10 at the top of the keyboard. The figure be low shows the function m enus and their corresponding f unction[...]

7. NBDP SYST EM OVER VIE W 7-4 7.3 Function Keys, Menu Operation The function keys at the top of the keyboard cont rol most operations of t his unit through a menu system. 7.3.1 Menu conventions In ver s e vi de o As you move the cursor do wn through a menu, a selected item, initially shown as white on black (monochrom e display), inverses to black[...]

7. NBDP SYSTEM OVER VIE W 7-5 7.3.2 Menu overview Selecting menus Press appropriate f unction key to open a m enu. T o display the File m enu, for exam ple, press the function key F1 . 1: New 2: Open 3: Close 4: Delete 5: Rename 6: Real Time Printing 7: File to Print 8: Cancel Printing 9: Clear Buffer 0: Floppy Disk Format File File menu Select ing[...]

7. NBDP SYST EM OVER VIE W 7-6 7.3.3 Function ke y desc ription Function key [F1 ]: File menu The File m enu is where you will create, ope n, save and print t elex m essages. Floppy disks are also form atted fr om t his menu. 1: New 2: Open 3: Close 4: Delete 5: Rename 6: Real Time Printing 7: File to Print 8: Cancel Printing 9: Clear Buffer 0: Flo[...]

7. NBDP SYSTEM OVER VIE W 7-7 Function key [F2 ]: Edit menu The Edit m enu provides a full line of editing f eatures. 1: Undo 2: Cut 3: Copy 4: Paste 5: Select All 6: Search 7: Replace 8: Goto Top 9: Goto Bottom 0: Goto Line A: Change Text Edit Edit menu 1: Undo Cancels the last change (cut, copy or p ast e). 2: Cut Removes the selected text and st[...]

7. NBDP SYST EM OVER VIE W 7-8 Function key [F3 ]: Operat e menu The Operate m enu mainly controls transm itt ing and receiving. 1: Call Station 3: File to Send 4: Cancel Sending 5: Scan (Start/Stop) 6: Manual Reception 7: Timer Operation 8: Manual Calling 9: Set Frequency Operate 2: Macro Ope ration Operate menu 1: Call St ation Chooses a station [...]

7. NBDP SYSTEM OVER VIE W 7-9 Function key [F4 ]: Window m enu The W indow m enu lets you display the corresp onding data of the wi ndow below . 1: Calendar 2: Distress Frequency Table Window Window menu 1: Calendar Displays desired cale ndar m onth and year . T o change year or mont h, choose item with ↑ or ↓ key and cha nge setting wit h ← [...]

7. NBDP SYST EM OVER VIE W 7-10 Function key [F5 ]: St ation m enu The S tation menu provides f or storage of stat io ns, timer program setup, user channel set up, and entry of various ID codes. 1: Station Entry 2: Timer Operation Entry 3: Scan Entry 4: User Channel Entry 5: Answerback Code Entry 6: Group ID Entry (4/5 digit) 7: Group ID Entry (9 d[...]

7. NBDP SYSTEM OVER VIE W 7-1 1 Function key [F6 ]: System menu The System menu is mainly f or use by techni cians and contains di agnostic tests. T o change settings, choose “Chan ge” from the item “Set up” and operate arro w keys to choose item and option. Press t he Ent er key to regist er selection and close the m enu. Setup Slave Delay[...]

7. NBDP SYST EM OVER VIE W 7-12 Window Color (I B-583) Chooses displa y colors. T o change display colors: 1. Choose the opti on Change f rom Setup. 2. Press t he ↓ key to choose W indow Color and press the Enter key . Window Color Change Window Color Setup Default Color To Change: ENTER To quit: ESC 3. The cursor is choosing W indow Color Setup;[...]

8-1 8. NBDP PREP ARA TI ONS This chapter provides th e procedures necessar y for prepar ing the NBDP T erminal Unit for transm itting and receivi ng. For autom atic telex, you will nee d to register the f ollowing: • Y our ship’s ID and answerback codes • S tations • T imer program s • Scan channel groups • User channels 8.1 Registerin [...]

8. NBDP PREP ARA TION S 8-2 For final verif ication of the data, the Caution sh own in the illust ration belo w appears. Answerback Code 123456789 FURU X Answerback Code Entry O K Cancel Caution Confirm the 'CODE' before pressing ENTER key. You cannot change the CODE once it has been entered. Message for confirmatio n of code entered 3. I[...]

8. NBDP PREP ARA TIONS 8-3 8.2 S t atio n List The station list provides for storage of up t o 50 stations, one frequenc y pair (RX and TX) per station. For stations which have m ore than one f requency pair , you m ight add a suffix to the station name t o denote multiple f requency pairs. For example, station nam e FURUNO follo w e d by –1, -2,[...]

8. NBDP PREP ARA TION S 8-4 8. If you selected “Cha nnel” at st ep 6, ent er ITU channel num ber (see Appendix) or User channel num ber . 9. If you selected “ScanT able” at st ep 6, press the → key to show scan group list registered. For scan group, refer to paragraph 8.5. 10. Choose a scan group nam e by using the ↓ or ↑ key followed[...]

8. NBDP PREP ARA TIONS 8-5 8.3 Timer Progra mming A built-in timer allo w s you to autom atically receive and transm it files. 10 timer programs can be registered. T o enabl e timer operation, see section 10-6. 8.3.1 Registeri ng timer programs 1. Press the function key F5 and the 2 key to display the T imer O peration Entry screen. Create Change T[...]

8. NBDP PREP ARA TION S 8-6 8.3.2 Editing/ Deleting timer pr ograms 1. Press the function key F5 and the 2 key . 2. Choose a tim er program name from t he Ti m er Operation List. 3. Press the → key to choose Chang e and press the Enter key . 4. Do one of t he following; Edit p rogra m: Use ↑ , ↓ and the Backs pace key to make corre ctions. De[...]

8. NBDP PREP ARA TIONS 8-7 8.4.2 Ed iting/Deleti ng user channels 1. Press funct ion key F5 and then the 4 key . 2. Press the ↑ or ↓ key to choose channel f rom the Channel List. 3. Press ↓ and → keys to choose Change and press the Enter key . 4. Do one of t he following: Edit ch annel: Use ↑ , ↓ and the Backsp ace key to ma ke modifi c[...]

8. NBDP PREP ARA TION S 8-8 new ones. If t he group name alread y exists , the message “Scan group by that name already exists. Press any key to escape. ” Appears. Press any key and change the scan group nam e.) 4. Press the ↓ key to choose Ch D well T im e. Ent er channel dwell tim e in seconds. Dwell time is the tim e in seconds the receive[...]

9-1 9. NBDP FI LE OPERA TIONS This chapter m ainly describes how to create, save, open, edit and print f iles. The Edit menu provides a full lineu p of editing f acilit ies, including search and rep lace. 9.1 Opening and Closing File s T o create a t elex message you will need t o make a new file, which you do with the F ile Open comm and. W hen yo[...]

9. NBD P FILE OPERA T IONS 9-2 Note: Do not use lower case lett ers, or the symbols #, &, *, $ and % in telex messages. Also, do not put “$$$” in the m iddle of a TX m essage, but at the end. The communication line is a utomat ically disconnected when this string is detected. 9.3 Sa v in g a File Use only 2HD type f loppy disks. Insert flop[...]

9. NBDP FILE OP ERA TIONS 9-3 9.3.2 Saving a file 1. Press the function key F1 to display the File m enu. 2. Press the 3 key . The screen should look som ething like the illust ration at right . Save file ? ( UNTITLED1 ) Close Text Yes No Close text screen 3. Y es is sel ected; press the Enter key . 4. Enter file nam e, using up to eight characters[...]

9. NBD P FILE OPERA T IONS 9-4 Cutting text 1. Place the cursor on the f irst character of the text to be cut. 2. Highlight t he text to be cut by pressing and ho lding the Shif t key while pressing t he → . If you highlight t ext which you do not want to cut, press the ← t o adjust the highlight . <[1]UNTITLED1> CONGULATULATION ON YOUR C[...]

9. NBDP FILE OP ERA TIONS 9-5 9.4.3 Select all The Select All feature lets you select all of the file currently displa yed. This feature can be useful when you want to co m bine files. The pr ocedure below explains how to place the f ile loaded in working area 1 onto the end of the f ile loaded in working area 2. 1. Load the f ile to be copied fr o[...]

9. NBD P FILE OPERA T IONS 9-6 9.4.5 Replacing text The Replace f eature helps you replace e very occurrence of a word or phase with another word or phase in a file. 1. Press the function key F2 and the 7 key . The Replace display appears. Replace Search string : Replace with : To quit: ESC Forward --------------- Forward Backward Dir Query All Mod[...]

9. NBDP FILE OP ERA TIONS 9-7 9.5 Opening Files T wo working areas (called working area 1 and wo rking are a 2) are provided to which you can load a file, and one f ile may be displayed on t he LCD. 9.5.1 Opening a file 1. Insert the f loppy disk which contains the f ile you want to open. 2. Press the function key F1 to display the File m enu. 3. P[...]

9. NBD P FILE OPERA T IONS 9-8 4. Enter a new name. 5. Press the Enter key . 9.7 Saving a File Under a New Name Y o u may save a f ile under a new nam e as follows: 1. Open a f ile. 2. Edit the file as necessary . 3. Press the function key F1 . 4. Press the 3 key to sa ve the file . 5. Press the Y key . 6. Press the Backspace key to erase the origi[...]

10-1 10. NBDP TRANSMITTI NG , RECEIVIN G This chapter m ainly shows you how to transm it and receive telex m essages. 10.1 Manual Calling NO TICE Before calling, watch the intended TX frequency carefully to confirm that is unoccupied. The simplest w a y to communicat e with a telex subscriber is Manual Calling. For the ARQ mode, you m ay display be[...]

10. N BDP TRAN SMITTING , R ECE IVING 10-2 5. Press the function key F3 again and then t he 8 key to choose Manual Calli ng. The follo w i ng screen appear s. Mode : ARQ FEC ID : Manual Calling Manual calling screen 6. Use t he ← or → key to choose appropriate co mmunication m ode. 7. Press the ↓ key and inp ut party’ s ID num ber . 8. Pres[...]

10. NBDP TRAN SMITTING , RE CEIVING 10-3 10.2 A RQ Mode Operation In ARQ operation, one stat ion (informat ion sendi ng station) sends data t o another block by block, then listens f or the acknowledge signal b etween blocks f rom the inform ation receiving station which requests eit her the next block or retr ansmission of the last block if there [...]

10. N BDP TRAN SMITTING , R ECE IVING 10-4 Note: If signal conditions are poor , connect ion ma y take a w h ile. If the line could not be connected in one m inute, calling stops and “Calling f ailed” appears. Try step 3 again, one m inute later . Should signal con dition s worsen during m essage transm ission, “Error” appears in reverse vi[...]

10. NBDP TRAN SMITTING , RE CEIVING 10-5 inform ation receiving station. 3. Receive a m essage from the sending station. 4. After completion of communication, press the function key F7 ( W RU) key to receiv e the answerback code of the other station and then press the f unction key F8 (HR) to transm it your own answerback code. 5. Press the functio[...]

10. N BDP TRAN SMITTING , R ECE IVING 10-6 10.5 Commu nication Example Call the coast station f ollowing the procedur e in paragraph 10.2. Then, comm unicate with the coast station. Below is a communication exam ple. 12345 KOBE X 1480 HKRDO VRX MOM GA+? OPR+ MOM 1480 HKRDO VRX 12345 KOBE X KOBE DE HKRDO GOOD MORNING NW NIL QRV GA+? GM NW QTC1+? QRV[...]

10. NBDP TRAN SMITTING , RE CEIVING 10-7 T able of abbreviations n o i t a i v e r b b An o i t s e u Qe c i v d A r o r e w s n A A R Q? n o i t a t s r u o y e m a n e h t s i t a h W. · · · · s i n o i t a t s y m f o e m a n e h T C R Qe h t e r a e s i r p r e t n e e t a v i r p t a h w y B n o i t a t s r u o y r o f s e g r a h c r o f [...]

10. N BDP TRAN SMITTING , R ECE IVING 10-8 Comma nd and abbre viation d n a m m o Cn o i t c n u F + M G T. m a r g e l e t o i d a r a s i e g a s s e m g n i w o l l o f e h t t a h t e t a c i d n i o T + G S M . d l e h e g a s s e m y n a y l e t a i d e m m i d e t c e n n o c e b o t s d e e n n o i t a t s p i h s e h t t a h t e t a c i d [...]

10. NBDP TRAN SMITTING , RE CEIVING 10-9 W hen the predeterm ined time comes, the NBDP T erminal Unit automaticall y sends or receives the m essage. The results o f timer operat ion are disp layed as either O K or NG (No Good) on the T imer Operation List. *1 2 *3 *OP4 *OP5 OK OK OK NG Timer Operation List Timer operation list 10.6.2 Stopping timer[...]

10. N BDP TRAN SMITTING , R ECE IVING 10-10 10.8 Commun ication Buffer The communicat ion buffer is a temporary me mory which stores transm it and receive messages. T o display the cont ents of the communication buffer , do the following: 1. Escape from the m essage creation screen. 2. Press the ↓ key while pressing the Fn key or the ↑ key pres[...]

10. NBDP TRAN SMITTING , RE CEIVING 10-1 1 10.9.2 Prep arations T o use autom atic telex, you will need to register three item s: • Answerback code • Scan groups • S tation names Registerin g answ erback code The coast station assigns a T ele x number . This number funct ions as an answerback code. An answerback code contains the f ollowing: [...]

10. N BDP TRAN SMITTING , R ECE IVING 10-12 10. 9.3 Co mma nds The tables which f ollows describe the commands f or macro operation Command (Prefix ed with @) Parameter C ontent CALL S: S tation Name Calling station name and ID on assi g ned par ame ter T wo digits, 0-99 min. Free-signal searching time ac cording to assigned parameter (default sett[...]

10. NBDP TRAN SMITTING , RE CEIVING 10-13 10.9.4 S t ore-and-forward method The follo wing is the sequence of events in tr ansmission of a f ile by the store-and-for ward met hod. 1. Shipboard station send s message to coast station. 2. Coast station stores message in m emory buffer . 3. Shipboard station and c oast station clear t he radio circuit[...]

10. N BDP TRAN SMITTING , R ECE IVING 10-14 Procedure fo r preparing a macrofile for sto re-and-forward method Y o u will need a m acrofile to enable aut om atic message transm ission by store-and-f orward method. After preparing it , save it to a floppy dis k for future use. 1. Press funct ion key F1 to display the F ile m enu. 2. Press the 1 key [...]

10. NBDP TRAN SMITTING , RE CEIVING 10-15 6. Press the Enter key and enter a file nam e as follows: OOOOOO OO.MCR ↑ ↑ F i l e N a m e E x t e n s i o n N a m e (max. 8 characters) 7. Press the Enter key . DIRTLX macrofi le Sample D IRTLX mac rofile @FREE $RRR$ @CALL S: L YNGBY RADIO @WR U @CASE GA+? @SEND DIR TLX725644325+ @CASE MSG+? @SEND A: [...]

10. N BDP TRAN SMITTING , R ECE IVING 10-16 Procedur e for DIRT LX . o N e r u d e c o r P y a l p s i D s k r a m e R 1. a coast station. l l a Cs r a e p p a T C E N N O C o e d i v e s r e v e r n i . ) s d n u o s l l e b d n a ( ; d n u o f l a n g i s - e e r F . y d a e r t i u c r i c o i d a r 2. l a n g i s U R W t i m s n a r T 00190 TLG[...]

10. NBDP TRAN SMITTING , RE CEIVING 10-17 10.10 A u tomatic T elex using Macrofile This section describes ho w to trans m it a telex message using a m acrofile. Basic pro cedure 1. Register answerback co de (T ele x number assigned b y coast station). 2. Register coast station f r equency and channel t o scan group. 3. Register station nam e includ[...]

10. N BDP TRAN SMITTING , R ECE IVING 10-18 Call Macro [A:TEST1. ] File name Size Date & Time LYNGBY1.MCR 169 02-10-13 06:23 [ End of Directory ] 1 Files exist 1454000 bytes free To select : ENTER To view : SPACE To quit : ESC Call macro screen 3. Press the ↓ key to choose a macrof ile. 4. Press the Enter key . Call Macro: Lyngby1.MCR Call O[...]

11 - 1 11. MAINTENANCE & TROUBLESHOOTING WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. NO TICE Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic [...]

1 1. MAIN TENANCE & TROUBLESHOOTING 11 - 2 1 1.2 Maintenance Regular m aintenance is vital f or maintaini ng per formance. Following the procedures be low will help keep the eq uipm ent in top operating condit ion. Maintenance check poi nts Item Check Point Remedy/Rem arks Antenna Check for physical dam age and corrosion. Replace dam aged parts[...]

1 1. MAIN TENANC E & TR OUBLESHOOT ING 11 - 3 1 1.3 Simple T rouble shooting The table below provide s possible problem s and the m eans with which to restore norm al operation. If norm al operation cannot be restore d, do not att empt to check inside the equipm ent. Any servicing should be referred to a qualif ied technici an. Problem Probable[...]

1 1. MAIN TENANCE & TROUBLESHOOTING 11 - 4 1 1.4 Erro r Messages The table below sho w s error messages, t heir meanings, and remedies. If oter error occurs, contact your dealer . Error messages Error m essage Meaning Remedy Busy: RT Radioteleph one is in operat ion. Wa it until the radiotelep hone is fr ee. Channel Bus y Y o u attem pted to tr[...]

1 1. MAIN TENANC E & TR OUBLESHOOT ING 11 - 5 1 1.5 Replacemen t of Fuses T o protect the equipm ent from overcurrent and equipm ent fault , two fuses are provided in the PR-300 Power Supply Unit. If a f use blow s, find t he cause before replacing it . If it blo ws again after replacem ent, request service. WARNING Use the proper fuse. Use of [...]

1 1. MAIN TENANCE & TROUBLESHOOTING 11 - 6 1 1.6 T est Call This function sends a t est signal to a coast or ship station, over one of six distress and safet y f requencies. F or that reason, it s hould no t be executed unnecess arily . Y ou can prepare a test call beforehand (see C hapter 6) or at the mom ent you intend to send a test call. T [...]

1 1. MAIN TENANC E & TR OUBLESHOOT ING 11 - 7 MSG TYPE : TEST MESSAGE STATION ID : 001234567 PRIORITY : SAFETY DSC FREQ : 2187.5 kHz GO TO VIEW Compose msg. 9. Press the CA LL key to send the t est call (transm ission time: about seven seconds). 10. The displa y shows “T est message in progress! ” w h ile the test call is bei ng transm itte[...]

1 1. MAIN TENANCE & TROUBLESHOOTING 11 - 8 TEST ACKNOWLEDGEMENT SENDER ID : 001234567 PRIORITY: SAFETY * Received message * GO TO VIEW MAR-23-2006-23:59 3M10S No re sponse! T ry c alling again? Re-send call : Push th e ENTER knob and the n press the CA LL key . Cancel cal l: Press the CANCEL key to return to the previous screen. 1 1.7 NBDP T er[...]

1 1. MAIN TENANC E & TR OUBLESHOOT ING 11 - 9 Setup Slave Delay TX/RX MSG Save Edit Before sending Time System Time & Date Window Color Self Test Lock Change Default 8 msec (0- 50 msec) OFF O N OFF O N OFF UTC SMT JST 2006/10/16 10:00:00 System System menu (Example: I B-583) 2. Choose Change f rom Setup. 3. Choose Self T est (at the bott om[...]

1 1. MAIN TENANCE & TROUBLESHOOTING 1 1-10 conducted conti nuously , you may press the Esc key t wice followed by the F10 key to stop the test and ret urn to the tone test menu. Station Name : Frequency (T/R) : / (kHz) Comm Mode : Auto Comm Status : Connect Send Lock Error Mark Space 1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:H[...]

A P-1 APPENDIX Menu T ree #/SETUP key HS. VOL (0 to 63, 45 ) NB ( OFF , ON) SQ (500-2000 Hz, 800 Hz ) USER CH (Shows user ch entry screen.) MESSAGE (Shows Message file entry screen) POSITION (Shows Position setup screen) DATE/TIME (Shows Date/Time setup screen) MEM CLR (RCVD ORDINARY LOG, RCVD DISTRESS LOG, TRANSMITTED LOG, MESSAGE FILES, USER CHAN[...]

APPEND IX AP - 2 NBDP terminal unit (telex) F1: File F2: Edit 1: Undo 2: Cut 3: Copy 4: Paste 5: Select All 6: Search 7: Replace 8: Goto Top 9: Goto Bottom 0: Goto Line A: Change Text F3: Operate 1: Call Station 2: Macro Operation 3: File to Send 4: Cancel Sending 5: Scan (Start/Stop) 6: Manual Reception 7: Timer Operation 8: Manual Calling 9: Set [...]

APPEND IX A P-3 Frequency T ables DSC frequency t able TX ( kHz ) RX ( kHz ) Remarks File N ame 2187.5 2187.5 4207.5 4207.5 6312.0 6312.0 8414.5 8414.5 12577.0 12577.0 16804.5 16804.5 Distress and Safety Frequencies 458.5 455.5 INTL-0.4M 2189.5(2177.0*) 2177.0 INTL-2M 4208.0 4219.5 INTL-4M 6312.5 6331.0 INTL-6M 8415.0 8436.5 INTL-8M 12577.5 12657.0[...]

APPEND IX AP - 4 Custom channels (to be programmed by FURUNO dealer s) O N H C) z H k ( e v i e c e R p i h S) z H k ( t i m s n a r T p i h Ss k r a m e R[...]

APPEND IX A P-5 MF band working carrier frequencies (ref. US CFR 47 Part 80.371) n o i g e R t i m s n a r T p i h S ) z H k ( e v i e c e R p i h S ) z H k ( n o i g e R t i m s n a r T p i h S ) z H k ( e v i e c e R p i h S ) z H k ( t s a o C t s a E5 . 1 3 0 20 . 0 9 4 2t s a o C f l u G0 . 9 0 0 20 . 6 6 4 2 0 . 8 1 1 20 . 4 1 5 20 . 4 3 1 20[...]

APPEND IX AP - 6 MF band SSB w orki ng carrier frequenci es O N H C e v i e c e R p i h S ) z H k ( t i m s n a r T p i h S ) z H k ( O N H C e v i e c e R p i h S ) z H k ( t i m s n a r T p i h S ) z H k ( 1 4 25 3 6 10 6 0 21 7 25 2 7 19 6 0 2 2 4 28 3 6 13 6 0 22 7 28 2 7 12 7 0 2 3 4 21 4 6 16 6 0 23 7 21 3 7 15 7 0 2 4 4 24 4 6 19 6 0 24 7 24[...]

APPEND IX A P-7 4/6 MHz ITU SSB carrier freque ncies (ITU RR Appendix 16) ) E 3 J ( B S S z H M 4) E 3 J ( B S S z H M 6 O N H C U T IX R p i h SX T p i h SO N H C U T IX R p i h SX T p i h S 1 0 47 5 3 45 6 0 41 0 61 0 5 60 0 2 6 2 0 40 6 3 48 6 0 42 0 64 0 5 63 0 2 6 3 0 43 6 3 41 7 0 43 0 67 0 5 66 0 2 6 4 0 46 6 3 44 7 0 44 0 60 1 5 69 0 2 6 5 [...]

APPEND IX AP - 8 8 MHz ITU SSB carrier frequencies (ITU RR A ppendix 16) x e l p u D - ) E 3 J ( B S S z H M 8 x e l p m i S - ) E 3 J ( B S S z H M 8 O N H C U T IX R p i h SX T p i h S) O N H C U T I (X R p i h SX T p i h S 1 0 89 1 7 85 9 1 8) 1 0 ( 0 4 81 0 1 81 0 1 8 2 0 82 2 7 88 9 1 8) 2 0 ( 1 4 84 0 1 84 0 1 8 3 0 85 2 7 81 0 2 8) 3 0 ( 2 4[...]

APPEND IX A P-9 12/16 ITU SSB carrier frequenci es (ITU RR Appendix 16) ) E 3 J ( B S S z H M 2 1) E 3 J ( B S S z H M 6 1) E 3 J ( B S S z H M 6 1 . O N H CX R P I H SX T P I H S. O N H CX R P I H SX T P I H S. O N H CX R P I H SX T P I H S 1 0 2 17 7 0 3 10 3 2 2 11 0 6 12 4 2 7 10 6 3 6 11 5 6 12 9 3 7 10 1 5 6 1 2 0 2 10 8 0 3 13 3 2 2 12 0 6 1[...]

APPEND IX A P -10 18/19, 22 , 25/26 ITU SSB carrie r frequencies (ITU RR A ppendix 16) ) E 3 J ( B S S z H M 9 1 / 8 1) E 3 J ( B S S z H M 2 2) E 3 J ( B S S z H M 2 2 . O N H CX R P I H SX T P I H S. O N H CX R P I H SX T P I H S. O N H CX R P I H SX T P I H S 1 0 8 15 5 7 9 10 8 7 8 11 0 2 26 9 6 2 20 0 0 2 21 5 2 26 4 8 2 20 5 1 2 2 2 0 8 18 5 [...]

APPEND IX A P-1 1 MF band telex frequency t able . O N H C t i m s n a r T p i h S ) C S D , P D B N ( e v i e c e R p i h S ) C S D , P D B N ( 2001 0 . 2 4 1 20 . 7 0 6 1 C S D / P D B N 2002 5 . 2 4 1 25 . 7 0 6 1 2003 0 . 3 4 1 20 . 8 0 6 1 2004 5 . 3 4 1 25 . 8 0 6 1 2005 0 . 4 4 1 20 . 9 0 6 1 2006 5 . 4 4 1 25 . 9 0 6 1 2007 0 . 5 4 1 20 . 0[...]

APPEND IX A P -12 ITU T elex frequen c y t able (1/4) 4210.5 4211.0 4211.5 4212.0 4212.5 4213.0 4213.5 4214.0 4214.5 4215.0 4177.5 4215.5 4216.0 4216.5 4217.0 4217.5 4218.0 4218.5 4219.0 4202.5 4203.0 4203.5 4204.0 4204.5 4205.0 4205.5 4206.0 4206.5 4207.0 4207.5 4219.5 4220.0 4220.5 4172.5 4173.0 4173.5 4174.0 4174.5 4175.0 4175.5 4176.0 4176.5 41[...]

APPEND IX A P-13 ITU T elex frequen c y t able (2/4) 8066 8067 8068 8069 8070 8071 8072 8073 7074 8075 8076 8077 8078 8079 8080 8409.0 8409.5 8410.0 8410.5 8411.0 8411.5 8412.0 8412.5 8413.0 8413.5 8414.0 8414.5 8436.5 8437.0 8437.5 8409.0 8409.5 8410.0 8410.5 8411.0 8411.5 8412.0 8412.5 8413.0 8413.5 8414.0 8414.5 8415.0 8415.5 8416.0 12066 12067 [...]

APPEND IX A P -14 ITU T elex frequen c y t able (3/4) 12131 12132 12133 12134 12135 12136 12137 12138 12139 12140 12141 12142 12143 12144 12145 12146 12147 12148 12149 12150 12151 12152 12153 12154 12155 12156 12157 12158 12159 12160 12161 12162 12163 12164 12165 12166 12167 12168 12169 12170 12171 12172 12173 12174 12175 12176 12177 12178 12179 12[...]

APPEND IX A P-15 ITU T elex frequen c y t able (4/4) 16196 16197 16198 16199 16200 16201 16202 16203 16204 16205 16206 16207 16208 16209 16210 16211 16212 16213 16214 16215 16216 16217 16218 16219 19220 16221 16222 16223 16224 16225 16226 16227 16228 16229 16230 16231 16232 16233 16234 16235 16236 16786.0 16786.5 16787.0 16787.5 16788.0 16788.5 167[...]

APPEND IX A P -16 T elex A bb re v i ations n o i t a i v e r b b Ag n i n a e M V D A K C A N G A ) S G ( I B K B M F C L O C V R C R E D N W D E E E M F A G S N M M O M I T U M A N C N H C N P N R N C C O K O ) 0 r o ( P ) E S P ( S L P R P P ) D C R ( R P A R D R E R T P R Y R S P V S X A T G S M T S E T U R H T ) X N T ( S K T X L T e s i v d A[...]

APPEND IX A P-17 Digit al Interface (IEC 61 162- 1) I/O Sentences Input sen tences (IEC 61 162-1) GNS, RM C, GLL, GGA, ZD A Input sen tence descrip tion GG A – Gl obal posi tioning s y ste m(GPS) fix data $--GGA,hhmmss.ss,llll.lll,a,yyyyy.yyy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | | | | | [...]

APPEND IX A P -18 GLL – Geogra phic position – latitude/ longit ude $--GLL,llll.lll,a,yyyyy.yyy,a,hhmmss.ss,A,a*hh<CR><LF> | | | | | | | | | | | | | | | +------- 6 | | | | | | +--------- 5 | | | | | +----------- 4 | | | | +---------------- 3 | | +------+----------------------- 2 +---+----------------------------------- 1 1. Latitude[...]

APPEND IX A P-19 GNS – GNSS fix dat a $--GNS,hhmmss.ss,llll.lll,a,yyyyy.yyy,a,c--c,xx,x.x,x.x,x.x,x.x,x.x*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | | | | | +--- 11 | | | | | | | | | | | +------ 10 | | | | | | | | | | +---------- 9 | | | | | | | | | +-------------- 8 | | | | | | | | +------------------ 7 | | | | | | | +-----[...]

APPEND IX A P -20 RMC – Recommend ed mini mum specific GPS/TRANSIT data $--RMC,hhmmss.ss,A,llll.lll,a,yyyyy .yyy ,a,x.x,x.x,xxxxxx,x.x,a,a*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | | | | | +--- 10 | | | | | | | | | | | +----- 9 | | | | | | | | | +--+------- 8 | | | | | | | | +--------------- 7 | | | | | | | +---------------[...]

APPEND IX A P-21 Schematic diag ram 05P0757 T-IF BOARD RD3_A TB6 R58 R59 10 10 J3 P201 P301 . . . . . . 24 < 41 < > 41 > 25 < 42 < > 42 > R60 330 S2 OPEN: IEC 61162-1 (NMEA 0183) R59 100 CR11 1 3 U18 4 5 05P0759 MOTHER BOARD T-CPU BOARD C29 100P C28 100P J1 1SS355 IEC 61162-1 05P0732A SHORT: CIF PC-400 RD3_B Load requi[...]

APPEND IX A P -22 Part s List This equipm ent contains complex m odules in which fault diagnosis an d repair down to component level are not practical (IMO A.694(17)/8. 3.1). Only some discrete components are used. FURUNO Elect ric Co., Ltd. Believes identif ying these com ponents is of no value for shipboard m aintenance; t herefore, they are not [...]

APPEND IX A P-23 T ran sceiver un it FS-2570T F U R U N O Model FS-2570T Unit TRANSCEIVER UNIT ELECTRICAL PARTS LIST Aug-02 Blk.No. SYMBOL TYPE CODE No. REMARKS SHIPPABLE A SS EMBLY PRINTED CIRCUIT BOARD B2 05P0731, T-I/F 005-963-050 X B3 05P0732B, T-CPU 001-033-810 X B4 05P0733, TX/RX 005-963-090 X B5, B18 05P0734A, W/R 001-005-370 X B6, B17 05P07[...]

APPEND IX A P -24 Contro l unit FS-2571C F U R U N O Model FS-2571C Unit CONTROL UNIT ELECTRICAL PARTS LIST Blk.No. SYMBOL TYPE CODE No. REMARKS SHIPPABLE ASS EMBLY PRINTED CIRCUIT BOARD B2 05P0810, PANEL X B3 05P0811A, C-CPU X B4 05P0812A, C-IF X 001-031-390 001-033-850 001-033-900[...]

APPEND IX A P-25 Contro l unit FS-5070T F U R U N O Model FS-5070T Unit TRANSCEIVER UNIT ELECTRICAL PARTS LIST Blk.No. SYMBOL TYPE CODE No. REMARKS SHIPPABLE ASS EMBLY PRINTED CIRCUIT BOARD B2 05P0757, T-I/F X B3 05P0732B, T-CPU X B5 05P0733, TX/RX X B6, B26 05P0734A, W/R X B17 to 20 05P0739A, PA X B13 05P0741, TX-FIL X B12 05P0737A, SW-REG X B8[...]

APPEND IX A P -26 Part s Location FS-1570T 05P0732B T -CPU Board 05P0744 RELA Y Board 05P0734A W/R Board 05P0733 TX/RX Board 05P0737A SW-REG Board 05P0746 PRESEL Board 05P0735 P A Board 05P0736 TX FIL Board 05P0731 T -I/F Board 05P0751B DSP Board 05P0751A DSP Board (for NBDP) 05P0747 REF OSC Board 05P0742 MB Board (under neath)[...]

APPEND IX A P-27 T ransceiver unit FS-2570T 05P0744 RELA Y 05P0747 REF OSC 05P0734A W/R 05P0733 TX/RX 05P0734A W/R (option) 05P0732B T -CPU 05P0731 T -I/F 05P0751B DSP (DSC) 05P0751A DSP (NBDP) 05P0746 PRESEL 05P0736A TX FIL 05P0740 COMB 05P0739A PA 05P0738 DRV 05P0737A SW-REG 05P0739A PA 05P0743 M-B (behind)[...]

APPEND IX A P -28 T ransceiver unit FS-5070T (1 ) 05P0741 TX-FIL Board 05P0744 RELA Y Board (Inside) 05P0737A SW-REG Board[...]

APPEND IX A P-29 T ransceiver unit FS-5070T (2 ) 05P0740 COMB Board 05P0762 RX-FIL Board 05P0738A DRV Board 05P0734A W/R Board 05P0733 TX-RX Board 05P0760 TX Board 05P0732B T -CPU Board (Upper) 05P0758 TB Board, (Lower) 05P0757 T -I/F Board 05P0739A P A Board 05P0765 DIV Board (Inside) 05P0764 PWR Board (Inside) COMB 05P0751A DSP Board (NBDP) 05P07[...]

APPEND IX A P -30 Control uni t FS-2571C 05P0810 P ANEL Board 05P081 1A C-CPU Board 05P0812A C-IF Board[...]

FURUNO FS-1570/25 70/507 0 SP - 1 E565 6S01A- M 080414 SPECIFICA TIONS OF SSB RA DIOTELEPHONE FS-1570/2570/50 70 1 MF/HF DIGITAL RADIOTELEPHONE 1.1 GENE RAL 1.1.1 Commun ication system Full-duplex* 1 , semi -dup l ex or simplex 1.1.2 Class of emiss ion J3E: Te lephone J2B (F1B): DS C and NBDP H3E: recept ion only 1.1.3 Frequency range 100.00 kHz to[...]

FURUNO FS-1570/25 70/507 0 SP - 2 E565 6S01A- M 080414 1.3.3 Sensitivit y Input lev el at 10 ohm+25 0 pF (below 4 MHz) and 50 ohm (above 4MHz ) to produce SINAD 20 d B Frequency Range J3E/H3E 100 kHz to 300 kHz 35 dBµV 300 kHz t o 1.6 MHz 25 dBµV 1.6 MHz t o 4.0 MHz 13 dB µV 4.0 MHz t o 30 MHz 7 dBµV 1.4 I ntermediate freque ncy 1st: 72,455 kHz[...]

FURUNO FS-1570/25 70/507 0 SP - 3 E565 6S01A- M 080414 2.2.7 Selectivit y -6 dB: 270 Hz to 300 Hz , -30 dB: within ± 380 Hz, -60 dB: with in ± 550 Hz 2.2.8 Receiving sy stem Double-co nversion superh eterodyne 2.2.9 Radiation w ithin 4 nW 2.2.10 RX error rate 1 % or less at 1 µV in put voltage 2.2.11 Spuriou s response 31.6 mV non-modu lated at [...]

FURUNO FS-1570/25 70/507 0 SP - 4 E565 6S01A- M 080414 -60 dB : within ±550 H z 2.4.8 Rec eiving Syste m Double-conv ersion superhet erodyne 2.4.9 Ra diation within 2 n W 2.4.10 RX Error Rate 1 % or less at 1 μ V in put voltag e 2.4.11 Sp urious Response 31.6 mV non- modulated at 10 μ V input voltage, at error rate within 1% 2.4.12 Sc anning Rec[...]

FURUNO FS-1570/25 70/507 0 SP - 5 E565 6S01A- M 080414 4 A NTE NN A CO UPLER (FS-1570/2570) 4.1 Tunin g System CPU c ontrolled fully aut omatic tun ing system 4.2 Frequency Range 1.6 MHz to 27.5Hz 4.3 Input I m pedance 50 ohms 4.4 Antenna 7m to 18 m wire or whip a ntenna 4.5 Power Capab i lity 150 W (FS-15 70), 250 W (FS-2570) 4.6 VS W R 1.5 max 4.[...]

FURUNO FS-1570/25 70/507 0 SP - 6 E565 6S01A- M 080414 8.3 De gree of protection Control un it IPX2 (pane l), IPX0 (chassis) Transce iver/terminal unit IPX0 Antenna co upler IPX5 (FS-1570/2 570), IPX6 (FS-5070) 8.4 Bear ing vibration 2 Hz-5Hz to 13.2 Hz: Amp litude: ±1 mm±10% 13.2 Hz t o 100 Hz: Max. acceleration 7 m/s 2 , fixed 9 COATING COLOR 9[...]

A P-1 INDEX 1/ RT/2182 ke y ............................................1- 2 2/DSC k ey ................................................... 1-1 4/Intcom key ................................................ 1-6 7/ key ....................................................... 1-4 8/PR INT key ..............................................6 -19 9/ key .[...]

I IN-2 Prin t out menu ........................................... 6-19 PSTN cal l charg e inform ation ................................. 5-35 recei ving ................................................ 5-3 3 sending .................................................. 5-30 RF ................................................................ 2-4 Scan [...]

9-52 Ashihara-cho, Nishinomiya, 662 - 8580, Japan Te l: + 81 (7 98) 6 5-2 11 1 Fa x : +8 1 (7 98) 6 5-4 20 0 www.fu r uno.co.jp Publication No. DOC-1027 Declaration of Conform ity W e FURUNO ELECTRIC CO., L TD. -------------- - --------------------- - ----------------- - --------------- - --------------- - --------------------- - ----------------- [...]

9-52 Ashihara-cho, Nishinomiya, 662 - 8580, Japan Te l: + 81 (7 98) 6 5-2 11 1 Fa x : +8 1 (7 98) 6 5-4 20 0 www.fu r uno.co.jp Publication No. DOC-1028 Declaration of Conform ity W e FURUNO ELECTRIC CO., L TD. -------------- - --------------------- - ----------------- - --------------- - --------------- - --------------------- - ----------------- [...]

9-52 Ashih ara-cho, Nis hinomiya, 662- 8580 , Japan Te l: + 81 ( 798 ) 65- 2111 Fax : +81 (798 ) 65- 4200 w ww.f ur uno .co.jp P ubl i ca t i on No . DO C- 1029 D ecl aration of Confor mity We F U R U N O E L E C T R I C C O . , L T D . ----- --- --- ---- ------ --- --- --- ------- --- --- --- ------ --- --- ------- --- --- --- ------ --- ---- --- [...]