Garmin Rino 130 manual

® owner’ s manual 130 2-way radio & personal navigator ®[...]

© Copyright 2003 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 E 151 st Street, Olathe, Kansas 66062 U.S.A. T el. 913/397.8200 Fax. 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9AQ U.K. T el. 44/1794.519944 Fax. 44/1794.519222 Garmin Corporation No. 68, Jangshu 2 nd Road, S[...]

i About This Manual Standard P ackage Contents: 1 Rino 130 Unit 1 Belt Clip 1 Wrist Strap 1 Owner’ s Manual 1 Quick Start Guide 1 PC Interface Cable Check to see that your package includes the items listed above. If any parts are missing, contact your Garmin dealer immediately . Thank you for choosing the Garmin Rino 130 ( R adio I ntegrated with[...]

ii Introduction FCC Compliance The Rino 130 complies with Part 15 of the FCC regulations and with Canadian RSS-210 and ICES-003 for Class B digital devices. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfe[...]

iii Introduction FCC Licensing Information The Rino 130 two-way radio operates on General Mobile Radio Service (GMRS) frequencies regulated by the Federal Communications Commission (FCC) in the United States. Operation on the GMRS frequencies is subject to additional rules as specified in 47 CFR Part 95. In order to transmit on GMRS fr equencies, [...]

iv Introduction Limited Warr anty This Garmin product is warranted to be fr ee from defects in materials or workmanship for one year from the date of pur chase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use. Such repairs or r eplacement will be made at no charge to the customer for parts[...]

v Introduction Products sold thr ough online auctions are not eligible for rebates or other special offers fr om Garmin. Online auction confirmations are not accepted for warranty verification. T o obtain warranty service, an original or copy of the sales receipt from the original r etailer is required. Garmin will not replace missing components [...]

vi Introduction Compliance , License , and W arranty Information Software License Agreement BY USING THE Rino 130, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTW ARE LICENSE AGREEMENT . PLEASE READ THIS AGREEMENT CAREFULL Y . Garmin grants you a limited license to use the software embedded in this device (the “Software?[...]

vii Introduction W arnings and Precautions The GPS system is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. Although the Garmin Rino 130 is a precision electr onic NA Viga - tion AID (NA V A[...]

viii Introduction For body-worn operation, this radio demonstrates compliance and meets the FCC RF exposure guidelines when used with approved accessories supplied with or designed for this pr oduct. Use of other accesssories may not ensure compliance with FCC RF exposure guidelines. Antenna Care - Use only the supplied antenna. Unauthorized antenn[...]

ix Introduction should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities - T ur n your radio OFF in any facility where posted notices so requir e. Commercial Air craft - Many commercial airlines prohibit the use of FRS radios on boar d. Switch OFF your radio before boar ding an aircraft or check t[...]

x Introduction Introduction ............................. i About This Manual .................................. i Compliance , License, and W arranty Informa - tion ................................................... ii FCC Compliance ............................... ii FCC Licensing Information .............. iii Limited W arranty ................[...]

xi Introduction Altimeter Page Options ......................... 36 Viewing Pr essure/Elevation Plots ..... 37 Adjusting the Zoom Ranges ............. 37 Viewing Points ................................ 38 Resetting Data ................................. 38 Calibrating the Altimeter ................. 39 Programming Data Fields ................ 39 T [...]

xii Introduction Satellite Page Overview ......................... 74 Skyview graphic .............................. 74 W AAS ............................................. 75 Satellite Strength ............................. 75 Satellite Page Options ............................ 76 Setup P ages .......................................... 78 Setup Men[...]

1 GETTING TO KNOW YOUR RINO 130 The Rino 130 ( R adio I ntegrated with N avigation for the O utdoors) is a 7.6 ounce, 12 chan- nel GPS-enabled handheld device. It also has integrated radio functionality to provide two-way communications for up to two miles using 14 FRS (Family Radio Service). The Rino 130 also provides 8 high-performance GMRS (Gene[...]

2 Overview Main Menu Radio P age Map P age T rip Computer Navigation P age Altimeter P age Main Display Pages All of the information you need to operate the Rino 130 can be found on six default main pages (or display screens). Simply press and r elease the P AGE button to cycle through the Radio Page, Map Page, Navigation Page, Altimeter Page, T ri[...]

3 Overview Operating the Rino 130 For best results, you should initialize the GPS receiver in your Rino 130 unit befor e you use it the first time. See page 5 for instructions on initializing the unit. For most accurate results, the compass and altimeter should also be calibrated. Refer to the Calibrating the Compass and Calibrating the Altimeter [...]

4 Overview Status Bar Overview The Status Bar at the top of the screen displays on all the available Main Pages. As you move around any of the Main Pages, the curr ent page’ s title briefly displays (3 seconds) and then is replaced by the Status Bar . The current settings and operational icons on the Status Bar are displayed as you operate the u[...]

5 Radio P age Radio P age RADIO P AGE O VERVIEW The Radio Page is the first of the default Main Pages. This page provides the user interface for FRS (Family Radio Service) and GMRS (General Mobile Radio Service) radio operations. Garmin Rino units work with 3rd party FRS/GMRS radios, pr ovided the other radios use stan- dard FRS/GMRS fr equencies.[...]

6 Reference Using ‘My ID’ and Symbol Fields The ‘My ID’ field allows you to enter a name and symbol that appears on other Rino units as you communicate with them. Y ou may enter a name using a combination of up to 10 letters, numbers, or spaces. The Symbol field allows you to choose a face icon from a list to further personalize your ID. [...]

7 Reference T o change the user symbol: 1. Using the THUMB STICK , highlight the face symbol to the right of the ‘My ID’ field. Press the THUMB STICK IN to show a list of available face icons . 2. Move the THUMB STICK UP or DOWN to scroll through the selections . Because not all the selections can fit in the window , a slider bar on the right[...]

8 Reference Setting the Channel and Squelch Code The Rino 130 has a total of 22 channels (not including GMRS repeater channels) and 38 squelch codes to select from using the ‘Channel’ and ‘Code’ fields. Channels 1–14 ar e for FRS, 15–22 are for GMRS (disabled by default) 15R–22R are for GMRS r epeater channels (disabled by default). [...]

9 Reference T o change the Channel and/or Squelch Code: 1. Using the THUMB STICK , highlight the ‘Channel’ or ‘Code’ field and then press the THUMB STICK IN to show a list of available channels/squelch codes . 2. Move the THUMB STICK UP or DOWN to scroll through the selections . Because not all the items fit in the window , a slider bar o[...]

10 Reference The ‘Monitor’ option lets you listen to a single channel for any activity , including static and weak voice signals. The Rino series automatically squelches a frequency to filter out unwanted noise. Using the Monitor option temporarily turns off the automatic squelch, allowing you to hear the open channel. If you see a broken tran[...]

11 Reference T o setup a Scanlist: 1. Using the THUMB STICK , highlight the Option Menu on-screen button and press IN . Highlight ‘Setup Scanlist’ and press the THUMB STICK IN . 2. T o add/remove a channel from the list, highlight the channel and press the THUMB STICK IN to add/remove the check mark in front of the name . Only channels that are[...]

12 Reference RADIO P AGE OPTION MENU The Radio Page Option Menu allows you to customize aspects of your Rino 130, such as setting up the radio, programming call and ring tones, and setting up a scanlist. Setup Radio The ‘Setup Radio’ option displays the Radio Setup Page. This page determines how the radio functions and enables you to adjust the[...]

13 Reference GMRS Radio - Use this option to turn On/Off GMRS channels 15–22. Peer -to-peer position- ing is not available on GMRS channels. See the FCC Licensing Information section and the Appendix for more information on using GMRS channels. Repeater Channel - Use this option to turn On/Off GMRS repeater channels 15R–22R. This option is only[...]

14 Reference Radio P age Setup T ones Call T one - When the CALL button is pressed, an attention tone is transmitted. This option allows you to choose one of ten tones. Roger T one - When the T ALK button is released, a tone is sent to signify the end of the trans- mission. This option allows you to choose one of four tones, or set the tone to ‘O[...]

15 Reference Radio P age Use Weather Radio The W eather Radio provides a constant update of the weather conditions, which is helpful while outdoors or planning a road trip. The W eather Alert further enhances the W eather Radio by breaking into FRS/GMRS transmissions and automatically br oadcasting any weather alerts. Select the Radio Page Option M[...]

16 Reference T urn Radio/GPS On/Off Press the THUMB STICK IN on either of these two options to toggle them fr om on to off. For example, to turn GPS Off, press the THUMB STICK IN when ‘T urn GPS Off ’ is highlighted. INFORMA TIONAL PICTURE The Informational Picture on the bottom half of the Radio Page features Garmin’ s Mr . Mark W aypoint sh[...]

17 GPS and FRS/GMRS Radio On; Ready to transmit Position GPS and W eather Radio On (FRS/GMRS Radio Off) GPS and FRS/GMRS Radio On; Ready to transmit Position; T ransmitting on FRS GPS and FRS/GMRS Radio On; Position not ready; T ransmitting on GMRS GPS and FRS/GMRS Radio On; Position transmitted GPS and FRS/GMRS Radio On; Ready to transmit Position[...]

18 Reference USING THE RINO 130 RADIO FEA TURES Y our Rino 130 unit pr ovides many features to enhance your radio experience, such as trans- mitting your location or any location and receiving contact information. This section reviews some of the advanced radio features. Refer to the Features section for information on all of the features of the Ri[...]

19 Reference The Rino 130 can manage up to 50 contacts at any time. Each time that you receive a signal from a contact, your map is updated showing their new position. A T rack Log of their move- ment is created and shown on your map (see the T rack Logs section). After a contact has been established, a “<contact name> Updated” message br[...]

20 Reference Radio P age T o change contact details: 1. T he Elevation, P osition and Note fields may be manually edited. Select the desired field and press the THUMB STICK IN . 2. F or Notes , highlight ‘Edit’ and press IN to start entering data, up to 30 char acters . F or other fields , highlight the field and press the THUMB STICK IN to[...]

21 Reference Radio P age T o send a location: 1. Press the THUMB STICK IN and hold it until the Shortcuts Menu is displayed. 2. Highlight ‘Find ‘N’ Go’ and press the THUMB STICK IN. 3. Highlight the desired category and press the THUMB STICK IN . ( For the Contacts List, select the desired contact and press the THUMB STICK IN .) 4. Dependin[...]

22 Reference Map P age Panning Arr ow (Map Pointer) Accuracy Circle Status Bar Option Menu and Main Page Menu Buttons Position Icon Map Scale Contact Bar MAP P AGE O VERVIEW The Map Page displays your present position and direction of movement using a triangular ‘Position Icon’ that is centered on the map. As you travel the map display leaves a[...]

23 Reference T o view a Contact from the Map P age: 1. Highlight the Contact icon using the THUMB STICK . As you highlight the contacts on the Contact Bar , the Map page centers the map on that contact and displays its name , direction, and distance near the top of the screen. 2. Press the THUMB STICK IN to view the details of the Contact. 3. Press[...]

24 Reference MAP P AGE OPTIONS Map Page options allow a variety of operating and custom features for your Rino 130. The Map Page options are: Highlight an option then press the THUMB STICK IN to select. Pan Map - Allows you to move the Panning Arrow (Map Pointer) about on the map. Refer to the Using the Pan Map Option section for complete instructi[...]

25 Reference Using the Pan Map Option The Map Page pan function allows you to display an arrow used to point at and identify items on the map, and to move the map in order to view ar eas beyond the current viewing area on the display . The map panning function is activated from the Option Menu on the Map Page. Use the THUMB STICK to move the pannin[...]

26 Reference Map P age Progr amming the Data Fields Select ‘Show ... Data Fields’ to view four optional Data Fields on the right side of the screen that can be programmed to pr ovide a variety of travel and navigation information. A list of the choices is shown below . Not all data types are available on every page. T o program a data field: 1[...]

27 Reference Map P age Setting up the Map The ‘Setup Map’ option displays the five Map Setup Pages, each accessed by an on-screen button. T o use Map Setup options: 1. Select ‘Setup Map’ from the Option Menu and then press the THUMB STICK IN to display the Map Setup P age . 2. Press UP or DOWN on the THUMB STICK to highlight the desired su[...]

28 Reference Map P age Display Mode - Land or W ater . T racks Setup Saved T racks and T rack Log - Scale options; ‘Off ’, ‘Auto’, or 20 ft.–500 miles, sets the maximum scale at which the feature should appear on the screen. Some types of data display only at certain zoom scales. Goto Line - Bearing or Course. T rack Points - Select the n[...]

29 Reference Map P age Measuring Distance T o use the Measure Distance option: 1. Select ‘Measure Distance’ from the Option Menu and then press the THUMB STICK IN to display the P anning Arrow . ‘Ref’ displays under the arrow . 2. Use the THUMB STICK to move about on the Map P age until you reach the point to which you want to measure . A n[...]

30 Reference Navigation P age NA VIGA TION P AGE O VERVIEW The Navigation Page provides active guidance with a r otating compass ring that shows your course (track) while you are moving and a bearing pointer to indicate the current dir ection to your destination (bearing) relative to the course. The Data Field at the top of the page, by default sho[...]

31 Reference Navigation P age Using the Navigation Page The two main components of the Navigation page are the Bearing Pointer and Compass Ring. The Bearing Pointer always points directly to the destination, no matter what your cur - rent location might be. The Compass Ring displays your heading. While you are navigating a r oute, the pointer indic[...]

32 Reference Navigation P age NA VIGA TION P AGE OPTIONS Sight ‘N Go - Use the Sight ‘N Go feature to locate a landmark visually and then lock in a magnetic heading to it. Stop Navigation - Cancels navigation (“Grayed out” or disabled unless you are navigating on a Goto, T rack, or Route.) Bearing Pointer/Course Pointer - T oggles between B[...]

33 Reference Using Sight ‘N Go T o use Sight ‘N Go to navigate: 1. Use the P A GE button to access the Navigation P age and then use the THUMB STICK to access the Option Menu . 2. Use the THUMB STICK to highlight ‘Sight ‘N Go’ and press IN. Note that the compass ring with pointer is in-line with the two sighting marks on the case . 3. Hol[...]

34 Reference Calibr ating the Compass The Electronic Compass must be calibrated outdoors when you first use the Rino 130 and after new batteries have been installed. The accuracy of the Electronic Compass is adversely affected if the unit is not held level or is held near items that generate magnetic fields, such as cars, large belt buckles, etc.[...]

35 Reference Altimeter P age Data Fields Status Window Profile Field AL TIMETER P AGE OVER VIEW The Altimeter Page provides the curr ent elevation, rate of ascent/descent, a profile of eleva- tion changes over distance or time, or a profile of pr essure changes over time. The Altimeter Page’ s Option Menu allows you to select from a variety of[...]

36 Reference AL TIMETER P AGE OPTIONS The Altimeter Page Option Menu allows you to select the type of information and how it is to be displayed. Altimeter Page Options include: Plot Over Time/Distance - Plots the changes in elevation or pressur e over a length of time or over a distance. When ‘Plot Over Distance’ is selected, ‘Plot over T ime[...]

37 Reference Viewing Pr essure/Elevation Plots When selecting the ‘View Elevation Plot’ option you can plot a pr ofile of elevation changes that occur as you navigate over a set distance or period of time. When you select ‘View Pr essure Plot’ you can view a recor d of changes in barometric pr essure for a set period of time. When one opti[...]

38 Reference Altimeter P age Viewing P oints The ‘View Points’ option allows you to scr oll through the stored elevation pr ofile and to view a single point along the profile. When the pointer is stopped at a location along the pr o- file, the display shows the elevation, time of day and date the point was created. T o use the ‘V iew Point[...]

39 Reference Altimeter P age Calibrating the Altimeter Because the Rino 130 relies on the Bar ometric pressure to determine the elevation and the pressure at any given elevation can fluctuate, you can calibrate the altimeter to incr ease its ac- curacy . Y ou must know the elevation or pressur e at your current location, information you can obtain[...]

40 Reference T rip Computer P age T rip Computer Page, Small Numbers T rip Computer Page, Big Numbers TRIP COMPUTER P AGE O VERVIEW The T rip Computer Page by default displays up to seven differ ent types of navigation data. Choosing ‘Big Numbers’ will display 2 large data fields. Each data field is selectable and can contain one of many data[...]

41 Reference Main Menu P age Main Menu P age MAIN MENU OVER VIEW The Main Menu provides access to additional Rino 130 featur e pages. The pages listed below provide enhancements to Rino 130 operation. Pr ess the P AGE button repeatedly to cycle to the Main Menu or select it from the Main Page Menu at the top of each main page. Using the Main Menu T[...]

42 Reference Setup Page - Allows tailoring of items such as time format, units of measure, display backlight- ing timeout and contrast adjustment, heading selection, interface setups, and system software information. Calendar Page - Provides you with a monthly calendar with pr ogrammable reference notes. Alarm Clock - Provides a settable 24-hour al[...]

43 Reference Main Menu P age MAIN MENU OPTIONS Through the Main Menu you can establish the sequence of pages. Page Sequence Setup Y ou may add, remove, or r eorder any of the Main Pages, plus additional pages. The default Main pages are Radio, Map, Navigation, Altimeter , T rip Computer , and Main Menu. The Main Menu cannot be removed fr om the pag[...]

44 Shortcuts Menu Shortcuts Menu SHORTCUTS MENU OVER VIEW The Shortcuts Menu is accessed by pressing the THUMB STICK IN until the menu pops up on the middle of the display . The Shortcuts Menu can be accessed from most pages. Mark W aypoint - Marks your current location as a waypoint. Opens the Mark W aypoint page that allows you to customize the w[...]

45 F eatures W aypoints Mark Waypoint P age Symbol W aypoint Name W aypoint Details Mark W aypoint Page icon WA YPOINTS There are numer ous ways to create, edit, and use waypoints. Using the Mark W aypoint Page and the Find ‘N Go Menu are two common pages for creating and editing waypoint. Y ou can also create a waypoint using the Map Page. The R[...]

46 F eatures W aypoints Creating W aypoints T o create a waypoint for a map feature: 1. With the P an Map feature active , move the panning arrow (map pointer) to the map item you want and highlight it. 2. Press IN and release the THUMB STICK to display the item information page. 3. With the Information P age displayed, highlight the Option Menu bu[...]

47 F eatures W aypoints Projecting a W aypoint Projecting a waypoint fr om any map item (another waypoint, etc.) allows you to establish a new waypoint on a bearing and distance projected fr om that map item. T o project a waypoint: 1. Select a map item from the Find ‘N Go Menu. 2. Highlight the Option Menu on-screen button at the top of the Info[...]

48 F eatures T o delete a waypoint or contact: 1. Use the Find ‘N Go feature to display the point. 2. Highlight the ‘Delete’ button and then press the THUMB STICK IN . Confirm the deletion. T o move a waypoint by dragging it: 1. Use the Find ‘N Go Menu to display the W aypoint P age for the waypoint you w ant to move . 2. Highlight and pre[...]

49 F eatures Find ‘N Go FIND ‘N GO MENU The Find ‘N Go Menu allows you to find stored locations (waypoints) and map items (cities, exits, etc.). They can be found by name or by those nearest to your current location. If you are using certain MapSour ce data, the list of find locations is expanded to include categories for Points of Interest[...]

50 F eatures Finding a Waypoint W aypoints that you have created and stor ed in the Rino 130 can be found by selecting the “W aypoint’ option fr om the Find ‘N Go Menu. Y ou can find a waypoint fr om the list of waypoints using the ‘By Name’ or ‘Nearest’ options as explained on the previous page. When selected from the list, the wayp[...]

51 F eatures T o find a waypoint by name: 1. Use the THUMB STICK to select ‘W aypoint’ from the Find ‘N Go Menu. Press the THUMB STICK IN to select ‘By Name’ from the pop-up menu. Press the THUMB STICK IN to display the Waypoints List. 2. Use the THUMB STICK to enter the name of the waypoint that you would lik e to find. 3. Select ‘OK[...]

52 F eatures Finding a Contact Contacts that you have received in the Rino 130 can be found by selecting the ‘Contacts’ option from the Find ‘N Go Menu. T o find a contact: 1. F rom the Find ‘N Go Menu, highlight ‘Contacts’ and press the THUMB STICK IN. 2. F rom the Contacts List, select the desired contact and press the THUMB STICK IN[...]

53 F eatures Finding a City Cities can be found by selecting the ‘Cities’ option of the Find ‘N Go Menu, selecting the city from the list of ‘Near est’ or ‘By Name’, and then displaying the City Information Page. The City Information for the selected city displays, including the city name, the size by population, and distance from you[...]

54 F eatures Finding an Exit Y ou can use the Find Exit option to locate a nearby exit on an interstate highway . Exits are listed only by ‘Nearest’. Exit information pages pr ovide a variety of information about services near each exit, such as rest stops, lodging, restaurants, and service stations. Some services such as service stations on th[...]

55 F eatures Finding a Point of Inter est Y ou can use the Find Points of Interest option to locate a nearby r estaurant, lodging, landmark, public building, park, etc. However , you must have transferred a MapSour ce MetroGuide map to the unit map database. Otherwise, this option, plus Address and Intersec- tion options, are grayed out and are not[...]

56 F eatures T o find a point of interest: 1. Use the THUMB STICK to highlight ‘P oints of Interest’ and then press it IN to display the P oints of Interest Categories List. 2. Use the THUMB STICK to select the desired category and then press it IN to display the T ypes List. 3. Use the THUMB STICK to select the desired type and then press it [...]

57 F eatures Find ‘N Go Finding an Address or Intersection Y ou can enter a street number , choose a street name from a list and find an address within the area of map data coverage or enter two street names and locate the intersection. T o use these options, however , you must be using a MapSource pr oduct that provides this type of map data. T[...]

58 F eatures T o locate an intersection: 1. Display the Find ‘N Go Menu and use the THUMB STICK to highlight the ‘Intersection’ category and press it IN to display the ‘Find Intersection’ page . 2. Highlight the first ’Street’ field and then press the THUMB STICK IN to display the ‘Street‘ list. 3. Enter the name of the street i[...]

59 F eatures Find ‘N Go Finding a Last Found Place Y ou can use the Recently Found Places option to locate Points of Interest, Cities, W aypoints or Contacts and Intersections and other locations you have recently retrieved. The pr ocess for finding recent points fr om the Find ‘N Go list is the same as finding a regular waypoint. T o find a[...]

60 F eatures W eather Radio Shortcuts Menu Radio Page with W eather Radio on USING THE WEA THER RADIO The W eather Radio can be tur ned on and of f through the Shortcuts Menu or the Option Menu in the Radio Page. Y ou may also enable W eather Alerts from the Radio Page. Refer to the Radio Page section for complete information about the W eather Rad[...]

61 F eatures Send Note Send Note P age Editing a note SENDING A NOTE Y ou may send a note to other Rino 130 users. When you send a note, it appears along the bottom of the display on every Rino 130 user who is using the same Channel and Squelch Code that you are using. The Send Note feature is gr eat when you are trying to get the group to meet at [...]

62 F eatures Goto Activating a Goto Viewing a Goto on the Map Page USING A GOTO The Goto function allows you to create a direct r oute to a destination, (waypoint, city , or point of interest). Once you have accessed the Information Page for an item, use the ‘Goto’ button at the bottom of the page to initiate travel, using the Map and Navigatio[...]

63 F eatures ROUTES OVER VIEW Route navigation allows you to create a sequence of intermediate waypoints that leads you to your final destination. The Rino 130 stores 20 r outes, each with up to 50 waypoints. A route can be cr eated and modified from the Route Page, and waypoints can be added to a r oute from the Find ‘N Go Menu. Mor e complex [...]

64 F eatures T o add a Find ‘N Go Menu item to a route: 1. Select an item from the Find ‘N Go Menu and display its Information P age. If a contact is used in a route , the route changes as the contact’ s position is updated, or it may be saved as a Waypoint to serve as a stationary point. 2. Select the page Option Menu and select ‘ Add To R[...]

65 F eatures T o copy the route: 1. F rom the Route P age, select the on-screen page Option Menu button and press the THUMB STICK IN to access the Option Menu. 2. Highlight the ‘Copy Route’ option and then press the THUMB STICK IN to copy . T he copied route displays on the Routes P age and is named the same but followed by the numeral 1 (one).[...]

66 F eatures T o insert a new point on the route list: 1. Select the row where you want the new point inserted before . Press the THUMB STICK IN . 2. Highlight ‘Insert’ and press the THUMB STICK IN to display the Find ‘N Go Menu and select a new waypoint, city , exit, point of interest, etc. 3. With the new point highlighted, press the THUMB [...]

67 F eatures Routes P age Adding or Editing from the Route Map P age Y ou can use the panning arr ow with the Route Map Page displayed to add or edit route waypoints. T o add a point at either end of a route: 1. Select the Route from the Routes List. Press the THUMB STICK IN to display the Route P age . 2. Highlight the on-screen ‘Map’ button a[...]

68 F eatures Routes P age T o review or remove a route point: 1. Select the Route from the Routes List. Press the THUMB STICK IN to display the Route P age . 2. Use the THUMB STICK to highlight the desired route and press IN to display the Route P age . 3. Use the THUMB STICK to move the map panning arrow to the point you want to review and press I[...]

69 F eatures Routes P age Stopping Navigation T o stop navigation, highlight the ‘Stop Navigation’ option on either the Navigation or Map page’ s Option Menu or select the ‘Stop’ button on the Route Page. Data Fields for the Route Page When navigating a Route, the data displayed in the data fields on the Route Page may be customized to p[...]

70 F eatures TRA CKS P AGE O VERVIEW The Rino 130 draws an electronic br ead crumb trail on the Map Page as you travel along. This bread crumb trail is the ‘T rack Log’. The T rack Log contains information about points along its path, including time, and position. The Rino 130 uses this information to allow you to navigate using the saved track[...]

71 F eatures Using the T racBack F eature The ‘T racBack’ feature allows you to return along a traveled path (or another Rino user’ s path) without marking any waypoints. When you are ready to r eturn to where you started, the Rino 130 takes you back by following the ‘T rack Log’ that you left behind. Y ou can save a total of 20 tracks in[...]

72 F eatures Setting up the T rack Log Y ou can set the track recor ding inter val to Distance, T ime, or Automatic. Y ou can set the T rack display resolution to High, Medium, Low , and Lowest. Y ou can also use the Option Menu to delete all saved tracks. T o use T rack Log Setup options: 1. Highlight the T racks P age Option Menu button at the to[...]

73 F eatures Proximity P age Proximity Waypoints P age Proximity Page icon Pro ximity Points The Proximity Page lets you define an alarm cir cle around a stored waypoint/contact posi- tion, and can be used to help you avoid dangerous ar eas or to alert you when you have strayed too far away from other Rino users. Up to ten waypoints may be listed,[...]

74 F eatures Satellite P age Satellite Page icon Satellite P age Skyview Graphic Signal Str ength Bars SA TELLITE P AGE O VERVIEW The Satellite Page provides a pictur e of satellite signal tracking, tells you when the unit is ready for navigation, and shows your location coor dinates. T o access the Satellite P age: 1. Press the P A GE button or th[...]

75 F eatures Satellite P age WAAS The W ide Area Augmentation System (W AAS) capability pr oduces a more accurate position fix. When enabled (GPS set to ‘Normal’ and W AAS set to ‘Enabled’ through the System Setup Page, also the interface must be set to something other than R TCM mode), this feature searches for W AAS satellites near your [...]

76 F eatures Satellite P age SA TELLITE P AGE OPTIONS Use With GPS Off - Use this option when you ar e indoors, your view of the sky is obstructed, or you want to save battery power . Y ou can enter data, create r outes, etc., but cannot navigate in this mode. T rack Up/North Up - Y ou can orient the satellite skyview by selecting ‘T rack Up’ ([...]

77 F eatures T o enter a new location: 1. Use the THUMB STICK to highlight the Option Menu button at the top of the page and then press it IN . 2. Highlight ‘New Location’ and press the THUMB STICK IN to display choices of ‘ Auto’ or ‘Use Map’. If you choose ‘ Automatic’ the Rino 130 determines your new location automatically . If y[...]

78 F eatures SETUP MENU The Setup Pages allow you to customize the Rino 130 to your personal preferences. Y ou can choose time settings, units of measure, display backlighting and contrast settings, heading measurement, interface options and system operating mode. By highlighting the icons on the Setup Menu and then pressing the THUMB STICK IN, you[...]

79 F eatures Setup P age Daylight Savings Time - Can be turned On or Off or set to Automatic. T o set the time: 1. Use the P A GE button to access the Main Menu. 2. Use the THUMB STICK to highlight the Setup Icon. Press the THUMB STICK IN to display the Setup Menu. 3. Use the THUMB STICK to highlight the Time Icon. Press the THUMB STICK IN to displ[...]

80 F eatures Position Format - Allows you to choose from differ ent grid formats. The default position for - mat, ‘hddd°mm.mmm’ displays the latitude and longitude in degrees and minutes and is most commonly used. The following additional formats are available: hdd d.d ddd d° - l ati tud e/l ong itu de in dec ima l d egr ees; hdd d°m m.m mm?[...]

81 F eatures Map Datum - Offers a selection of nearly all map datums in common use. Every map is based on a map datum (a reference model of the earth’ s shape) and is usually listed in the title block of the map. If you are comparing GPS coor dinates to a paper map, chart, or other reference, the map datum in this field must match the horizontal[...]

82 F eatures Contrast Adjustment - Can be adjusted from light to dark using the slider adjacent to the contrast bar . T o access the Display Setup page: 1. Press the P A GE button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll down and select Setup . 3. Select the Display icon to open the Display Setup page . T o set the backli[...]

83 F eatures chosen, you must correct for the Magnetic V ariation. The Electronic or GPS compass uses the North Reference setting to create a bearing. Switch to Compass Heading when Below - Enter the desired speed for the Rino 130 to switch from using GPS to using the compass for guidance. For more than… - Enter a time limit to switch to the comp[...]

84 F eatures Garmin DGPS - Allows DGPS input using a Garmin beacon receiver and a standard R T - CM SC-104 and DGPS tuning. NMEA In/NMEA Out - Supports the output of standard NMEA 0183 version 3.0 data. Use this for real-time plotting with MapSour ce or 3rd party pr ograms. T ext Out - Allows ASCII text output of location and velocity information w[...]

85 F eatures System Setup Page The System Setup Page allows you to change GPS operation modes, use the W AAS capabili- ties, turn the Message Beep and compass on or of f, choose the battery type, and set the altimeter calibration settings to automatic or manual. See the Appendix for W AAS capability information. T o access the System Setup page: 1.[...]

86 F eatures Calendar Calendar P age Calendar options Using the Calendar This feature pr ovides you with a monthly calendar with programmable r eference notes. Y ou can display one monthly calendar at a time and add refer ence notes using the data entry keypad. Days that are shaded have notes added. Y ou can create reference notes for multiple mont[...]

87 F eatures T o edit or delete a note: 1. T o edit or delete a note previously created, highlight the date and press the THUMB STICK IN . 2. Select ‘Edit Note’, or ‘Delete Note’, from the pop-up menu. T o complete the deletion of the note , press the THUMB STICK IN when ‘Y es’ is highlighted in the pop-up window. 3. T o edit the note ,[...]

88 F eatures Alarm Clock Alarm Clock P age Alarm Clock icon Using the Alarm Clock This feature pr ovides an alarm for the system clock. Enter a time in the time field and turn the alarm on and off fr om the control field menu. Remember to enter alarm times in the same time format (UTC or local) you are using for your system. The unit must be on f[...]

89 F eatures Calculator Calculator P age Calculator icon Using the Calculator This feature pr ovides you with all the basic functions of both of standard or scientific calcu- lator . Y ou can perform most calculations identified by the function symbols along the sides of the keypad and can save the results temporarily in the memory . The memory i[...]

90 F eatures Stopwatch Stopwatch P age Stopwatch icon Using the Stopwatch This feature allows you to use the unit as a stopwatch, including using it as a lap timer . Y ou may also have the unit recor d the lap time based on distance. For example, if you set the lap distance to one mile, the unit recor ds the time it takes you to travel one mile. T [...]

91 F eatures Sun & Moon Sun & Moon P age Sun & Moon icon Using the Sun & Moon Page This feature pr ovides you with a graphic display of both sun and moon positioning for a certain date, time and location with times for sunrise, sunset, moonrise, and moonset. T o access the Sun & Moon P age: 1. Press the P A GE button or the Menu[...]

92 F eatures Hunt & Fish Hunt & Fish icon Hunt & Fish P age Using the Hunt & Fish Page This feature pr ovides you with a listing of best times for hunting and fishing for a chosen location and date. T o access the Hunt & Fish P age: 1. Press the P A GE button or the Menu icon to open the Main Menu. 2. In the Main Menu, scroll d[...]

93 F eatures Using the Area Calculator This feature pr ovides you an area calculation as you move about a location or view a saved track. The area calculation displays in acres, hectar es, and square feet, square yar ds, square meters, square kilometers, and square miles. T o access the Area Calculator: 1. Press the P A GE button or the Menu icon t[...]

94 F eatures Games Games Menu Games Menu icon GAMES MENU The Games Page includes Memory Race, W aypoint Bomber , Clothesline, Assimilation and Beast Hunt. Highlight the appropriate icon and then pr ess the THUMB STICK IN to play the desired game. Brief instructions are displayed when you start each game. All players must be on the same channel/sque[...]

95 F eatures W aypoint Bomber In this game, it is good to stay on the move! T wo or more players attempt to “bomb” each other . Move your cursor around on the map page using your THUMB STICK . When you think an opponent is close to your cursor , drop a bomb. The r eceiving radio shows an ‘Incom- ing” message. If the receiving radio is withi[...]

96 F eatures Games Clothesline T eam members select the same user symbol and then attempt to “hit” or “clothesline” other players by pressing the T ALK button when an opposing team member is between them. Y ou may also mark a point and assign it a symbol to be used as a stationary team member . W ait 30 seconds between attempts. Press CALL [...]

97 WHA T IS FRS? FRS, or Family Radio Service, is a UHF radio frequency band allocated by the FCC for general public use. The operating frequency ranges fr om 462.5625 to 467.7125 MHz, with a maximum transmitting power of one half watt. FRS radios are small and lightweight, making them ideally suited for outdoor activities. FRS radios typically fea[...]

98 Appendix Remember though, these are public-use frequencies and everyone has a right to talk or listen in. Channel scan allows your FRS radio to scan all FRS frequencies for signals. After scan- ning briefly to see what channels other users are on, simply set your FRS radios to an unused channel and enjoy less interference. For greater privacy ,[...]

99 Appendix Physical Case: Fully-gask eted, high-impact plastic alloy, waterproof to IPX7 standards (waterproof to one meter for 30 minutes) Size: 4.5” H x 2.3” W x 1.6” D; 7” H with antenna (11.4 x 5.8 x 4.1; 17.8 cm) Weight: Approx. 7.6 ounces (236 g) with batteries T emperature Range: -4° to 158° F (-20° to 70° C) (operating r ange) [...]

100 Appendix Radio Channels: 1–14 FRS , 15–22 GMRS (GMRS requires FCC license) 1–7 Weather Radio channels Squelch Codes: 1–38 Range: UP to 2 miles on FRS; up to 5 miles on GMRS Radio Output P ower: FRS 0.5 watt; GMRS 1.0 watt Power Input: T hree 1.5 V olt AA batteries 3 Battery Life: GPS only: up to 41 hours; FRS only: up to 20 hours; FRS ,[...]

101 Appendix T o ob tain a ccesso ries, see yo ur loc al dea ler or visit the G armin web si te at www .Garmin .com. 12-volt Adapter Cable: Provides unit power fr om an automobile cigarette lighter . 2.5 to 3.5 mm Jack Adapter: Allows you to use 3rd party headsets with your Rino unit. Bash Guard Kit: Helps pr otect the Rino’ s edges against har d[...]

102 Appendix T ransferring MapSour ce Map Data If you have purchased a Garmin MapSour ce CD-ROM mapping program you may want to transfer detailed map data before beginning use, to pr ovide your unit with maximum Find features and mapping capability . The Rino 130 accepts up to 24 MB of map data fr om most MapSource pr oducts. It is not possible to [...]

103 Appendix T o setup for data transfer: 1. Remove the P ower/Data P ort cover on the back of the unit by lifting up on the protective cover on the back of the unit. 2. Connect the serial port connection on the cable to the PC serial port. 3. Connect the remaining cable connector to the back of the Rino 130 by orienting the slot on the connector w[...]

104 Appendix GPS T roubleshooting Guide T o resolve pr oblems that cannot be remedied using this guide, contact Garmin Customer Service at 913-397-8200 or 800-800-1020 . Symptom Probable Cause Remedy Unit does not turn On. Batteries are exhausted. Replace batteries. Unit does not turn On, even with new batteries. Batteries may be installed backward[...]

105 Appendix Radio T roubleshooting Guide T o resolve pr oblems that cannot be remedied using this guide, contact Garmin Customer Ser - vice at 913-397-8200 or 800-800-1020. Symptom Probable Cause Remedy Radio not transmitting. T alk key may not be fully depressed. Press and hold T ALK key until done talking. FRS/GMRS Radio feature may not be On. T[...]

106 Appendix Data Field Definitions The following data field options are available on the Map, Navigation, Altimeter , and T rip Computer Pages. Ambient Pressure - T he uncalibrated current pressure . (Altimeter P age Only.) A verage Ascent - The aver age vertical distance of ascents . (Altimeter P age Only.) A verage Descent - T he average verti[...]

107 Appendix Maximum Elevation - The highest elev ation reached. (Altimeter P age Only .) Maximum Speed - T he maximum speed the unit has moved. Minimum Elevation - The lowest elev ation reached. (Altimeter P age Only .) Moving Avg . Speed - Aver age speed of the unit while moving. Odometer - A running tally of distance travelled, based upon the di[...]

108 Appendix Interface Information Interface Information Interface formats are selected in the Setup Interface Page. See also the MapSour ce Setup sec- tion of this Appendix for information on using the Rino 130 with MapSource. The input/output lines on your Rino 130 unit are RS-232 compatible, allowing easy interface to a wide range of external de[...]

109 Appendix Frequency Charts NO TE: If you plan to purchase FRS radios from third party manufacturers be aware that there are CTCSS differences in some radios . Some of the tones on one radio may not be avail - able on other radios . Charts showing the different Squelch Codes and manufacturers can be located on the Internet. NO TE: GMRS is not cur[...]

110 Appendix Frequency Charts NO TE: GMRS is not currently approved for use in Canada. F or use in countries outside of the U .S ., please check with that government for any restrictions on FRS or GMRS use . GMRS Frequency Chart Channel # T ransmit Frequency (MHz) Receive Frequency (MHz) Channel Description 15 462.5500 462.5500 GMRS Primary 1 16 46[...]

111 A Accessories 101 Accuracy 99 Acquisition time 99 Address 57 Add to Route 50, 51, 53, 54, 56 Alarm 73, 88 Alarm Clock 88 Alert’ 15, 60 Alkaline 85 Altimeter Page 35, 35–39 Calibrate 36 Options 36 Overview 35 Reset 36 View Points 36 Zoom Ranges 36, 37 Altitude 35–39 Arriving at Destination 62 Arrow 25 Ascent 35, 39, 106 Attractions 55 Auto[...]

112 Index Fields, Data 39 Finding Address 57 City 53 Contact 52 Exit 54 Intersection 57, 58 Point of Interest 55 Find ‘N Go 48–94, 49, 49–94, 62, 64 Fishing Hot Spots 102 Fishing information 92 Food & Drink 55 Frequency Charts 109, 110 FRS 1, 5, 8, 97, 109 G Games 94 GARMIN sentences 108 General Mobile Radio Service 1 GMRS 1, 5, 8, 13, 97[...]

113 Index New Contact 18 New Location 76, 77 NiCad 85 NiMH 85 NMEA 0183 108 North heading 27 North Up 27, 76 Note 61, 86 O On-screen Button 39 On/Off T one 14 Operating the Rino 3 Options Menu 3 Orientation 27 P Page Sequence Setup 43 Pan Map 24, 25 PC 102, 108 PC Interface Cable 102 Peer -to-Peer 12, 13, 16, 18 PIT 13 Plot Over Distance 36 Over T [...]

114 Index Units 79 Radio 12 Scanlist 14 TD field 80 T ime Page T ime 78 T ones 14 Message 14 On/Off T one 14 Shopping 55 Shortcut Menu 3, 44–94, 46, 49 Overview 44 Show ... 24 Show Data Fields 32 Sight ‘N Go 32, 33 Signal Strength 74 Size 99 Skyview 74 Specifications 99 Squelch codes 8, 97 Status Bar 4 Stopwatch 90 Stop Navigation 24, 32 Stre[...]

[...]

F or the latest free software updates (excluding map data) thr oughout the life of your Garmin products , visit the Garmin web site at www .garmin.com. © Copyright 2003 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial [...]