Gefen EXT-VGAA-HD-SC manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Gefen EXT-VGAA-HD-SC, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Gefen EXT-VGAA-HD-SC one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Gefen EXT-VGAA-HD-SC. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Gefen EXT-VGAA-HD-SC should contain:
- informations concerning technical data of Gefen EXT-VGAA-HD-SC
- name of the manufacturer and a year of construction of the Gefen EXT-VGAA-HD-SC item
- rules of operation, control and maintenance of the Gefen EXT-VGAA-HD-SC item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Gefen EXT-VGAA-HD-SC alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Gefen EXT-VGAA-HD-SC, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Gefen service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Gefen EXT-VGAA-HD-SC.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Gefen EXT-VGAA-HD-SC item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    EXT-VGAA-HD-SC User Manual VGA & Audio to HDMI Scaler/Converter Release A1 *Pr eferred[...]

  • Page 2

    ii 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8. Do not install or place this product near any heat sources su[...]

  • Page 3

    Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notied within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, [...]

  • Page 4

    iv T echnical S upport (818) 772-9100 (800) 545-6900 8:00 AM to 5:00 PM Monday - Friday , Pacic T ime Fa x (818) 772-9120 Email support@gefen.com We b http://www .gefen.com Mailing Addr ess Gefen, LLC c/o Customer Service 20600 Nordhoff St. Chatsworth, CA 9131 1 Pr oduct R egistr ation Register your product here: http://www .gefen.com/kvm/Regist[...]

  • Page 5

    v • Audio from the 2-channel analog input will be automatically embedded into the HDMI output signal. • By default, the current input and output resolution will be displayed whenever the VGA & Audio to HDMI Scaler/Converter is disconnected from the source or display or if a change in the video output settings are made. This feature can be d[...]

  • Page 6

    vi Features and Packing List Features • Converts and scales VGA and L/R analog audio to HDMI • Input resolutions up to 1920 x 1200 (WUXGA) • Output resolutions up to 1080p60 and 1920 x 1200 (WUXGA) • On-screen display (OSD) menu allows easy set-up and control • Aspect Ratio Control: Full Screen, Panoramic, Letter/Pillar , Extract/Crop •[...]

  • Page 7

    [...]

  • Page 8

    viii Table of Contents 1 Get ting St arted Introduction............................................................................................................ 2 Installation ............................................................................................................. 4 Connection Instructions ...................................[...]

  • Page 9

    ix Table of Contents 3 Adv anced Oper ation USB Interface ...................................................................................................... 48 Installing the Virtual COM Port .................................................................... 48 Commands .........................................................................[...]

  • Page 10

    [...]

  • Page 11

    1 Ge t ting St ar t ed VGA & Audio to HDMI Scaler/Converter Introduction............................................................................................................ 2 Installation ............................................................................................................. 4 Connection Instructions ..............[...]

  • Page 12

    page | 2 Page Title VGA & Audio to HDMI Scaler/Converter ® VGA In L/R In USB 12V DC Pwr HDMI Out Up Dn Menu EXT-VGAA-HD-SC VGA & Audio to HDMI Scaler/Converter ® VGA In L/R In USB 12V DC Pwr HDMI Out Up Dn Menu EXT-VGAA-HD-SC VGA & Audio to HDMI Scaler/Converter ® VGA In L/R In USB 12V DC Pwr HDMI Out Up Dn Menu EXT-VGAA-HD-SC Introd[...]

  • Page 13

    page | 3 Page Title Introduction ID Name Description 1 HDMI Out Use an HDMI cable to connect a Hi-Def display to this HDMI port. 2 Up, Dn, Menu These push-buttons are used to change settings within the on-screen menu system. See Menu System (page 8 ) for more information. 3 VGA In Connect the included VGA cable from source device (e.g. computer) to[...]

  • Page 14

    page | 4 Connection Instructions ► Video 1. Connect the included VGA cable from the video source (e.g. computer) to the VGA In port on the VGA & Audio to HDMI Scaler/Converter . 2. Connect an HDMI cable from the HDMI Out port to an HD display . ► Audio 3. Connect the included 3.5mm mini-stereo cable from the audio source to the L/R In port [...]

  • Page 15

    [...]

  • Page 16

    [...]

  • Page 17

    VGA & Audio to HDMI Scaler/Converter 2 Basic Oper ation Menu System ........................................................................................................ 8 Displaying the Menu System ......................................................................... 8 Moving around within the Menu System ...............................[...]

  • Page 18

    page | 8 Displaying the Menu System The VGA & Audio to HDMI Scaler/Converter uses a built-in menu system to manage and control all video features. 1. T o display the menu system, press the Menu button on the front panel. 2. The menu system will be displayed in the upper-left corner of the screen, as shown below: If the menu system is not used w[...]

  • Page 19

    page | 9 Moving around within the Menu System 1. There are six menu items within the main menu : Output Setup , Picture , Adjustment , System , T est Patterns , and Exit . 2. The currently selected item within the main menu will always be highlighted in yellow . 3. Each item within the main menu, with the exception of Exit , contains a submenu . Th[...]

  • Page 20

    page | 10 5. T o access the submenu for the highlighted item within the main menu, press the Menu button a second time. When a submenu is activated, a green bar is used to indicate the current selection. By default, the top submenu item will always be highlighted once a submenu is activated. 6. Use the Up or Dn button to select the desired option w[...]

  • Page 21

    page | 1 1 9. T o exit the submenu and return to the main menu, use the Up or Dn button to highlight the <- Back option. 10. Press the Menu button to return to the main menu. 1 1. T o exit the menu system, use the Up or Dn button to highlight the Exit option: 12. Press the Menu button to select the Exit option. 13. The menu system is now hidden.[...]

  • Page 22

    page | 12 Output Resolution 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Press the Menu button to access the Output Setup submenu. The Output Resolu. option will be highlighted. 3. Press the Menu button to select the Output Resolu. option. 4. The Output Resolu. selection box be displayed: 5. Use the U[...]

  • Page 23

    page | 13 8. After a few seconds, the input and output resolution information dialog will disappear . 9. The Output Resolu. dialog is still displayed: 10. Press the Menu button to return to the Output Setup submenu: 1 1. Use the Up or Dn button to select the <- Back option. 12. Press the Menu button. 13. Use the Up or Dn button to select the Exi[...]

  • Page 24

    page | 14 Output Color 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Press the Menu button to access the Output Setup submenu. The Output Resolu. option will be highlighted. 3. Use the Up or Dn button to highlight the Output Color option. 4. Press the Menu button to select the Output Color option. 5. T[...]

  • Page 25

    page | 15 9. Press the Menu button to return to the Output Setup submenu. 10. Use the Up or Dn button to select the <- Back option. 1 1. Press the Menu button. 12. Use the Up or Dn button to select the Exit option 13. Press the Menu button to exit the main menu. Basic Oper ation Menu System Gefen Converter ---------------- 1.Output Setup 2.Pictu[...]

  • Page 26

    page | 16 Basic Oper ation Basic Oper ation Menu System Output Mode 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Press the Menu button to access the Output Setup submenu. The Output Resolu. option will be highlighted. 3. Use the Up or D n button to highlight the Output Mode option. 4. Press the Menu b[...]

  • Page 27

    page | 17 Basic Oper ation Menu System 9. Press the Menu button to return to the Output Setup submenu. 10. Use the Up or Dn button to select the <- Back option. 1 1. Press the Menu button. 12. Use the Up or Dn button to select the Exit option 13. Press the Menu button to exit the main menu. Gefen Converter ---------------- 1.Output Setup 2.Pictu[...]

  • Page 28

    page | 18 Contrast 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Picture option. 3. Press the Menu button to access the Picture submenu. The Contrast option will be highlighted. 4. Press the Menu button to select the Contrast option. 5. The Contrast selection bo[...]

  • Page 29

    page | 19 Brightness 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Picture option. 3. Press the Menu button to access the Picture submenu. The Contrast option will be highlighted. 4. Use the Up or D n button to highlight the Brightness option. 5. Press the Menu [...]

  • Page 30

    page | 20 Gefen Converter ---------------- 1.Output Setup 2.Picture 3.Adjustment 4.System 5.Test Patterns 6.Exit Contrast Brightness Saturation Hue Color Range Color Temp. Color Balance Edge Enhance Sharpness <- Back a a Saturation 50 Saturation 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the [...]

  • Page 31

    page | 21 Hue 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Picture option. 3. Press the Menu button to access the Picture submenu. The Contrast option will be highlighted. 4. Use the Up or Dn button to highlight the Hue option. 5. Press the Menu button to selec[...]

  • Page 32

    page | 22 Basic Oper ation Menu System Gefen Converter ---------------- 1.Output Setup 2.Picture 3.Adjustment 4.System 5.Test Patterns 6.Exit Contrast Brightness Saturation Hue Color Range Color Temp. Color Balance Edge Enhance Sharpness <- Back [ Limited ] a a Color Range Color Range 1. Press the Menu button on the front panel. The Output Setup[...]

  • Page 33

    page | 23 Color Temperature 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Picture option. 3. Press the Menu button to access the Picture submenu. The Contrast option will be highlighted. 4. Use the Up or Dn button to highlight the Color T emp. option. 5. Press t[...]

  • Page 34

    page | 24 Color Balance 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Picture option. 3. Press the Menu button to access the Picture submenu. The Contrast option will be highlighted. 4. Use the Up or Dn button to highlight the Color Balance option. 5. Press the [...]

  • Page 35

    page | 25 Edge Enhance 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Picture option. 3. Press the Menu button to access the Picture submenu. The Contrast option will be highlighted. 4. Use the Up or Dn button to highlight the Edge Enhance option. 5. Press the Me[...]

  • Page 36

    page | 26 Basic Oper ation Menu System Gefen Converter ---------------- 1.Output Setup 2.Picture 3.Adjustment 4.System 5.Test Patterns 6.Exit Contrast Brightness Saturation Hue Color Range Color Temp. Color Balance Edge Enhance Sharpness <- Back a a Sharpness 0 Sharpness 1. Press the Menu button on the front panel. The Output Setup option will b[...]

  • Page 37

    page | 27 Basic Oper ation Menu System Underscan/Overscan 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Adjustment option. 3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan option will be highlighted. 4. Press the Menu button to sele[...]

  • Page 38

    page | 28 Aspect Ratio 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Adjustment option. 3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan option will be highlighted. 4. Use the Up or Dn button to highlight the Aspect Ratio option. 5.[...]

  • Page 39

    page | 29 Horizontal Mirror 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Adjustment option. 3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan option will be highlighted. 4. Use the Up or Dn button to highlight the H-Mirror option. 5[...]

  • Page 40

    page | 30 Basic Oper ation Menu System 8. Press the Menu button to conrm the change and return to the Adjustment submenu. 9. Use the Up or Dn button to select the <- Back option. 10. Press the Menu button. 1 1. Use the Up or Dn button to select the Exit option 12. Press the Menu button to exit the main menu. Basic Oper ation[...]

  • Page 41

    page | 31 Vertical Mirror 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Adjustment option. 3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan option will be highlighted. 4. Use the Up or Dn button to highlight the V -Mirror option. 5.[...]

  • Page 42

    page | 32 Basic Oper ation Menu System 8. Press the Menu button to conrm the change and return to the Adjustment submenu. 9. Use the Up or Dn button to select the <- Back option. 10. Press the Menu button. 1 1. Use the Up or Dn button to select the Exit option 12. Press the Menu button to exit the main menu. Basic Oper ation[...]

  • Page 43

    page | 33 Horizontal Shift 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Adjustment option. 3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan option will be highlighted. 4. Use the Up or Dn button to highlight the H-Shift option. 5. [...]

  • Page 44

    page | 34 Basic Oper ation Basic Oper ation Menu System Vertical Shift 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Adjustment option. 3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan option will be highlighted. 4. Use the Up or Dn[...]

  • Page 45

    page | 35 Basic Oper ation Menu System Phase 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the Adjustment option. 3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan option will be highlighted. 4. Use the Up or Dn button to highlight the P[...]

  • Page 46

    page | 36 OSD Timeout 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the System option. 3. Press the Menu button to access the System submenu. The OSD Timeout option will be highlighted. 4. Press the Menu button to select the OSD Timeout option. 5. The OSD Timeout se[...]

  • Page 47

    page | 37 Display Notify 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the System option. 3. Press the Menu button to access the System submenu. The OSD Timeout option will be highlighted. 4. Use the Up or Dn button to highlight the Display Notify option. 5. Press t[...]

  • Page 48

    page | 38 8. Press the Menu button to conrm the change and return to the System submenu. 9. Use the Up or Dn button to select the <- Back option. 10. Press the Menu button. 1 1. Use the Up or Dn button to select the Exit option 12. Press the Menu button to exit the main menu. Basic Oper ation Menu System Basic Oper ation[...]

  • Page 49

    page | 39 Input Resolution Information 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the System option. 3. Press the Menu button to access the System submenu. The OSD Timeout option will be highlighted. 4. Use the Up or Dn button to highlight the Input Res. Info opt[...]

  • Page 50

    page | 40 F/W Version 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the System option. 3. Press the Menu button to access the System submenu. The OSD Timeout option will be highlighted. 4. Use the Up or Dn button to highlight the F/W V ersion option. 5. Press the Me[...]

  • Page 51

    page | 41 Basic Oper ation Menu System Gefen Converter ---------------- 1.Output Setup 2.Picture 3.Adjustment 4.System 5.Test Patterns 6.Exit OSD Timeout Display Notify Input Res.Info F/W Version Factory Reset <- Back [ No ] a a Factory Reset Factory Reset 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. [...]

  • Page 52

    page | 42 Test Patterns 1. Press the Menu button on the front panel. The Output Setup option will be highlighted. 2. Use the Up or Dn button to highlight the T est Patterns option. 3. Press the Menu button to access the T est Patterns submenu. The White option will be highlighted. 4. Use the Up or Dn button to highlight the desired test pattern. 5.[...]

  • Page 53

    page | 43 Basic Oper ation Menu System 6. Press the Menu button to return to the T est Patterns submenu and select a different pattern. 7. T o disable the pattern and view the source image, select Off from the T est Patterns submenu. Window Gray[...]

  • Page 54

    page | 44 DIP Switch Conguration Basic Oper ation On the bottom panel of the VGA & Audio to HDMI Scaler/Converter is a single DIP switch. Remove the piece of colored tape to reveal the DIP switch bank. By default, the DIP switch is in the OFF (1) position. The DIP switch should remain in this position during normal operation. DIP Switch Desc[...]

  • Page 55

    [...]

  • Page 56

    [...]

  • Page 57

    VGA & Audio to HDMI Scaler/Converter 3 A dv anced Oper ation USB Interface ...................................................................................................... 48 Installing the Virtual COM Port .................................................................... 48 Commands ....................................................[...]

  • Page 58

    page | 48 USB Interface Adv anced Oper ation Installing the Virtual COM Port In order to control the VGA & Audio to HDMI Scaler/Converter using the following commands, a virtual COM port must be installed on the computer that is connected to the VGA & Audio to HDMI Scaler/Converter . 1. Install the Gefen Syner-G Software Suite. This softwar[...]

  • Page 59

    page | 49 Adv anced Oper ation 6. The Computer Management window will open. 7. In the left window pane, under System T ools , click Device Manager . 8. In the right window pane, locate Ports (COM & LPT) . The device EXT-VGAA-HD-SC will be displayed along with the COM port. Use this COM port when conguring the terminal program (e.g. Hyperterm[...]

  • Page 60

    page | 50 Commands Command Description #factory_reset Resets the unit to factory-default settings #fw_upgrade Enables the rmware upgrade mode #get_aspect_ratio Displays the current aspect ratio setting #get_brightness Displays the current brightness setting #get_color_balance Displays the value of the specied color channel #get_color_range Di[...]

  • Page 61

    page | 51 Commands Command Description #set_color_balance Sets the color balance #set_color_range Set the output color range #set_color_temp Sets the color temperature #set_contrast Sets the picture contrast #set_display_notify Enables / disables display notications #set_edge_enhance Sets the edge enhancement #set_horizontal_mirror Sets horizont[...]

  • Page 62

    page | 52 Commands Adv anced Oper ation Using Preset Values When a command is entered, the VGA & Audio to HDMI Scaler/Converter will conrm the entry by returning the function of the command and any parameters. There are several commands which use a preset value as one of the parameters. When specifying a preset value as a parameter , the ret[...]

  • Page 63

    page | 53 Commands #factory_reset Resets the unit to factory-default settings. S yntax #factory_reset P ar amet ers None Example #factory_reset RESET TO FACTORY DEFAULTS Relat ed Commands #reboot Adv anced Oper ation[...]

  • Page 64

    page | 54 Commands #fw_upgrade Enables the rmware upgrade mode. We recommend that the Gefen Syner-G Software Suite be used to upgrade the rmware. S yntax #fw_upgrade P ar amet ers None Example #fw_upgrade Waiting for rmware le to be received... Relat ed Commands #get_rmware_version Adv anced Oper ation Adv anced Oper ation[...]

  • Page 65

    page | 55 Adv anced Oper ation Commands #get_aspect_ratio Displays the current aspect ratio setting. S yntax #get_aspect_ratio P ar amet ers None Example #get_aspect_ratio ASPECT RATIO IS Source Relat ed Commands #get_video_settings #set_aspect_ratio[...]

  • Page 66

    page | 56 Adv anced Oper ation Commands #get_brightness Displays the current brightness value. S yntax #get_brightness P ar amet ers None Example #get_brightness PICTURE BRIGHTNESS IS 52 Relat ed Commands #set_brightness Adv anced Oper ation[...]

  • Page 67

    page | 57 Adv anced Oper ation Commands #get_color_balance Displays the current color balance for the specied color channel. S yntax #get_color_balance param1 P ar amet ers param1 Color channel [0 ... 2] param1 Description 0 Red channel 1 Green channel 2 Blue channel Example #get_color_balance 1 PICTURE COLOR BALANCE Green Channel IS 50 Relat ed[...]

  • Page 68

    page | 58 Adv anced Oper ation Commands #get_color_range Displays the current color range setting. S yntax #get_color_range P ar amet ers None Example #get_color_range PICTURE COLOR RANGE IS Limited Relat ed Commands #set_color_range Adv anced Oper ation[...]

  • Page 69

    page | 59 Adv anced Oper ation Commands #get_color_temp Displays the current color temperature setting. S yntax #get_color_temp P ar amet ers None Example #get_color_temp PICTURE COLOR TEMPERATURE IS Neutral Relat ed Commands #set_color_temp[...]

  • Page 70

    page | 60 Adv anced Oper ation Commands #get_contrast Displays the current contrast setting. S yntax #get_contrast P ar amet ers None Example #get_contrast PICTURE CONTRAST IS 68 Relat ed Commands #set_contrast Adv anced Oper ation[...]

  • Page 71

    page | 61 Adv anced Oper ation Commands #get_display_notify Displays the current display-notify setting. Refer to the #set_display_notify command for more information about Display Notication. S yntax #get_display_notify P ar amet ers None Example #get_display_notify DISPLAY NOTIFICATIONS IS On Relat ed Commands #set_display_notify[...]

  • Page 72

    page | 62 Adv anced Oper ation Commands #get_edge_enhance Displays the current edge-enhance setting. S yntax #get_edge_enhance P ar amet ers None Example #get_edge_enhance PICTURE EDGE ENHANCEMENT IS Off Relat ed Commands #set_edge_enhance Adv anced Oper ation[...]

  • Page 73

    page | 63 Adv anced Oper ation Commands #get_rmware_version Displays the current rmware version. S yntax #get_rmware_version P ar amet ers None Example #get_rmware_version FIRMWARE VERSION IS V1.012 Relat ed Commands #fw_upgrade[...]

  • Page 74

    page | 64 Adv anced Oper ation Commands #get_horizontal_mirror Displays the horizontal mirror setting. S yntax #get_horizontal_mirror P ar amet ers None Example #get_horizontal_mirror HORIZONTAL MIRROR IS Off Relat ed Commands #get_vertical_mirror #set_horizontal_mirror Adv anced Oper ation[...]

  • Page 75

    page | 65 #get_horizontal_shift Displays the current horizontal shift setting. S yntax #get_horizontal_shift P ar amet ers None Example #get_horizontal_shift HORIZONTAL SHIFT IS Off Relat ed Commands #set_horizontal_shift Adv anced Oper ation Commands[...]

  • Page 76

    page | 66 Adv anced Oper ation Commands #get_hue Displays the current hue setting. S yntax #get_hue P ar amet ers None Example #get_hue PICTURE HUE IS 50 Relat ed Commands #get_brightness #get_contrast #get_saturation #set_hue Adv anced Oper ation[...]

  • Page 77

    page | 67 Adv anced Oper ation Commands #get_input_resolution Displays the current input resolution. S yntax #get_input_resolution P ar amet ers None Example #get_input_resolution INPUT RESOLUTION IS 1600x1200p60 Relat ed Commands #get_picture_settings[...]

  • Page 78

    page | 68 Adv anced Oper ation Commands #get_osd_timeout Displays the current OSD timeout value (in seconds). S yntax #get_osd_timeout P ar amet ers None Example #get_osd_timeout OSD TIMEOUT IS 5 SECONDS Relat ed Commands #set_osd_timeout Adv anced Oper ation[...]

  • Page 79

    page | 69 Adv anced Oper ation Commands #get_output_color Displays the current output color space. S yntax #get_output_color P ar amet ers None Example #get_output_color OUTPUT COLOR SPACE IS RGB 4:4:4 Relat ed Commands #get_color_range #get_color_temp #set_output_color[...]

  • Page 80

    page | 70 Adv anced Oper ation Commands #get_output_mode Displays the current output mode. S yntax #get_output_mode P ar amet ers None Example #get_output_mode OUTPUT MODE IS Auto Detect Relat ed Commands #get_output_color #set_output_mode Adv anced Oper ation[...]

  • Page 81

    page | 71 #get_output_res Displays the current output resolution. S yntax #get_output_res P ar amet ers None Example #get_output_res OUTPUT RESOLUTION IS 1400x1050 60Hz Relat ed Commands #set_output_res Adv anced Oper ation Commands[...]

  • Page 82

    page | 72 #get_phase Displays the current phase setting. S yntax #get_phase P ar amet ers None Example #get_phase PHASE IS 26 Relat ed Commands #get_video_settings #set_phase Adv anced Oper ation Commands Adv anced Oper ation[...]

  • Page 83

    page | 73 Adv anced Oper ation Commands #get_picture_settings Displays the current picture settings. This command provides the same information as consecutively executing the following commands: #get_contrast , #get_brightness , #get_saturation , #get_hue , get_color_range , #get_color_temp , #get_color_balance , #get_edge_enhance , and #get_sharpn[...]

  • Page 84

    page | 74 Adv anced Oper ation Commands #get_saturation Displays the current saturation value. S yntax #get_saturation P ar amet ers None Example #get_saturation PICTURE SATURATION IS 50 Relat ed Commands #get_contrast #get_brightness #get_hue #get_color_range #get_color_temp #get_edge_enhance #get_sharpness Adv anced Oper ation[...]

  • Page 85

    page | 75 Adv anced Oper ation Commands #get_sharpness Displays the current sharpness value. S yntax #get_sharpness P ar amet ers None Example #get_sharpness PICTURE SHARPNESS IS 0 Relat ed Commands #get_contrast #get_brightness #get_saturation #get_hue #get_color_range #get_color_temp #get_edge_enhance[...]

  • Page 86

    page | 76 Adv anced Oper ation Commands #get_test_patterns Displays the currently active test pattern. S yntax #get_test_patterns P ar amet ers None Example #get_test_patterns TEST PATTERNS IS Off Relat ed Commands #set_test_patterns Adv anced Oper ation[...]

  • Page 87

    page | 77 Adv anced Oper ation Commands #get_timing_preset Displays the values for the specied timing preset. S yntax #get_timing_preset P ar amet ers param1 Preset [0 ... 5] Example #get_timing_preset 1 Preset 2 Hor Scan = 45.0 Hor Active = 1280 Hor Ft Porch = 110 Hor Sync W = 40 Hor Bk Porch = 220 Hor Total = 1650 Hor Polarity = + Pixel Clk = [...]

  • Page 88

    page | 78 Adv anced Oper ation Commands #get_uo_scan Displays the current underscan or overscan value. S yntax #get_uo_scan P ar amet ers None Example #get_uo_scan UNDER/OVER SCAN IS OFF Relat ed Commands #set_uo_scan Adv anced Oper ation[...]

  • Page 89

    page | 79 Adv anced Oper ation Commands #get_vertical_mirror Displays the current vertical mirror value. S yntax #get_vertical_mirror P ar amet ers None Example #get_vertical_mirror VERTICAL MIRROR IS Off Relat ed Commands #get_horizontal_mirror #set_vertical_mirror[...]

  • Page 90

    page | 80 Adv anced Oper ation Commands #get_vertical_shift Displays the current vertical shift value. S yntax #get_vertical_shift P ar amet ers None Example #get_vertical_shift VERTICAL SHIFT IS OFF Relat ed Commands #get_horizontal_shift #set_vertical_shift Adv anced Oper ation[...]

  • Page 91

    page | 81 Adv anced Oper ation Commands #get_video_output Displays the current video output settings. This command produces the same output as consecutively executing the #get_output_res , #get_output_color , and #get_output_mode commands. S yntax #get_video_output P ar amet ers None Example #get_video_output OUTPUT RESOLUTION IS 1400x1050 60Hz OUT[...]

  • Page 92

    page | 82 Adv anced Oper ation Commands #get_video_settings Displays the current video settings. This command provides the same information as consecutively executing the #get_uo_scan , #get_aspect_ratio , #get_horizontal_mirror , #get_vertical_mirror , #get_horiziontal_shift , #get_vertical_shift , and #get_phase commands. S yntax #get_video_setti[...]

  • Page 93

    page | 83 Adv anced Oper ation Commands #help Displays help on a specic command. If no command is specied ( param1 ), then a list of all available commands will be displayed. S yntax #help [param1] P ar amet ers param1 Command (optional) Example s #help #FACTORY_RESET #FW_UPGRADE #GET_ASPECT_RATIO #GET_BRIGHTNESS #SET_COLOR_BALANCE #GET_COLOR[...]

  • Page 94

    page | 84 Adv anced Oper ation Commands #reboot Reboots the unit. S yntax #reboot P ar amet ers None Example #reboot UNIT WILL REBOOT SHORTLY Relat ed Commands #factory_reset Adv anced Oper ation[...]

  • Page 95

    page | 85 Adv anced Oper ation Commands #set_aspect_ratio Sets the aspect ratio of the output video signal. The default setting is 0. S yntax #set_aspect_ratio param1 P ar amet ers param1 Aspect ratio [0 ... 3] param1 Description 0 16:9 1 4:3 2 Stretch 3 Source Example #set_aspect_ratio 1 ASPECT RATIO SET TO 4:3 Relat ed Commands #get_aspect_ratio[...]

  • Page 96

    page | 86 Adv anced Oper ation Commands #set_brightness Sets the brightness of the output video signal. The default setting is 50. S yntax #set_brightness param1 P ar amet ers param1 Brightness [0 ... 100] Example #set_brightness 58 PICTURE BRIGHTNESS SET TO 58 Relat ed Commands #get_brightness #set_color_balance #set_color_range #set_contrast #set[...]

  • Page 97

    page | 87 Adv anced Oper ation Commands #set_color_balance Sets the color balance of the output video signal. S yntax #set_color_balance param1 param2 P ar amet ers param1 Color channel [0 ... 2] param1 Description 0 Red 1 Green 2 Blue param2 Intensity [0 ... 100] Example #set_color_balance 1 90 PICTURE COLOR BALANCE Green Channel SET TO 90 Relat e[...]

  • Page 98

    page | 88 Adv anced Oper ation Commands #set_color_range Sets the color range of the output video signal. S yntax #set_color_range param1 P ar amet ers param1 Color range [0 ... 1] param1 Description 0 Full (0 - 255) 1 Limited (16 - 235) Example #set_color_range 1 PICTURE COLOR RANGE SET TO Limited Relat ed Commands #get_color_range #set_color_bala[...]

  • Page 99

    page | 89 Adv anced Oper ation Commands #set_color_temp Sets the color temperature of the output video signal. S yntax #set_color_temp param1 P ar amet ers param1 Color temperature [0 ... 2] param1 Description 0 W arm 1 Neutral 2 Cool Example #set_color_temp 2 PICTURE COLOR TEMPERATURE SET TO Cool Relat ed Commands #get_color_temp #set_color_balanc[...]

  • Page 100

    page | 90 Adv anced Oper ation Commands #set_contrast Sets the contrast of the output video signal. S yntax #set_contrast param1 P ar amet ers param1 Contrast [0 ... 100] Example #set_contrast 40 PICTURE CONTRAST SET TO 40 Relat ed Commands #get_contrast #set_brightness #set_hue #set_saturation Adv anced Oper ation[...]

  • Page 101

    page | 91 Adv anced Oper ation Commands #set_display_notify Enables / disables the input/output resolution information dialog. When set to On, the input/ output resolution information dialog will be displayed, momentarily , whenever the source is disconnected / reconnected to the VGA & Audio to HDMI Scaler/Converter or if a change to the output[...]

  • Page 102

    page | 92 Adv anced Oper ation Commands #set_edge_enhance Sets the picture edge enhancement (sharpness) threshold. The Mid and Max settings are sharpness presets. T o set the sharpness to a specic setting, set param1 = 3, then use the #set_sharpness command to set the sharpness value. S yntax #set_edge_enhance param1 P ar amet ers param1 Edge de[...]

  • Page 103

    page | 93 Adv anced Oper ation Commands #set_horizontal_mirror Enables or disables horizontal mirroring. When set to on , the output image is ipped horizontally . S yntax #set_horizontal_mirror param1 P ar amet ers param1 State [0 ... 1] param1 Description 0 Off 1 On Example #set_horizontal_mirror 1 HORIZONTAL MIRROR SET TO On Relat ed Commands [...]

  • Page 104

    page | 94 Adv anced Oper ation Commands #set_horizontal_shift Adjust the horizontal position of the output image. S yntax #set_horizontal_shift param1 P ar amet ers param1 Horizontal shift [-100 ... 100] Example #set_horizontal_shift -20 HORIZONTAL SHIFT IS SET TO -20 Relat ed Commands #get_horizontal_shift #get_video_settings #set_vertical_shift A[...]

  • Page 105

    page | 95 Adv anced Oper ation Commands #set_horz_active Sets the number of active horizontal pixels and saves it to the specied preset. S yntax #set_horz_active param1 param2 P ar amet ers param1 Pixels [0 ... 9999] param2 Preset [0 ... 5] Example #set_horz_active 1280 1 HORIZONTAL ACTIVE 1280 SAVED TO PRESET 2 Relat ed Commands #get_timing_pre[...]

  • Page 106

    page | 96 Adv anced Oper ation Commands #set_horz_back_porch Sets the horizontal back porch and saves it to the specied preset. S yntax #set_horz_back_porch param1 param2 P ar amet ers param1 Pixels [0 ... 9999] param2 Preset [0 ... 5] Example #set_horz_back_porch 220 1 HORIZONTAL BACK PORCH 220 SAVED TO PRESET 2 Relat ed Commands #get_timing_pr[...]

  • Page 107

    page | 97 Adv anced Oper ation Commands #set_horz_front_porch Sets the horizontal front porch and saves it to the specied preset. S yntax #set_horz_front_porch param1 param2 P ar amet ers param1 Pixels [0 ... 9999] param2 Preset [0 ... 5] Example #set_horz_front_porch 110 1 HORIZONTAL FRONT PORCH 110 SAVED TO PRESET 2 Relat ed Commands #get_timi[...]

  • Page 108

    page | 98 Adv anced Oper ation Commands #set_horz_scan_rate Sets the horizontal scan rate and saves it to the specied preset. param1 is a oating-point value and can be specied up to three decimal places. S yntax #set_horz_scan_rate param1 param2 P ar amet ers param1 Scan rate (kHz) [0.000 ... 999.000] param2 Preset [0 ... 5] Example #set_h[...]

  • Page 109

    page | 99 Adv anced Oper ation Commands #set_horz_sync_polarity Sets the horizontal sync polarity and saves it to the specied preset. S yntax #set_horiz_sync_polarity param1 param2 P ar amet ers param1 State [0 ... 1] param1 Description 0 Negative 1 Positive param2 Preset [0 ... 5] Example #set_horiz_sync_polarity 1 1 HORIZONTAL SYNC POLARITY PO[...]

  • Page 110

    page | 100 Adv anced Oper ation Commands #set_horz_sync_width Sets the horizontal sync width in pixels and saves it to the specied preset. S yntax #set_horz_sync_width param1 param2 P ar amet ers param1 Width (pixels) [0 ... 9999] param2 Preset [0 ... 5] Example #set_horz_sync_width 40 1 HORIZONTAL SYNC WIDTH 40 SAVED TO PRESET 2 Relat ed Comman[...]

  • Page 111

    page | 101 Adv anced Oper ation Commands #set_horz_total Sets the total number of horizontal pixels and saves it to the specied preset. S yntax #set_horz_total param1 param2 P ar amet ers param1 T otal (pixels) [0 ... 9999] param2 Preset [0 ... 5] Example #set_horz_total 1650 1 HORIZONTAL TOTAL 1650 SAVED TO PRESET 2 Relat ed Commands #get_timin[...]

  • Page 112

    page | 102 Adv anced Oper ation Commands #set_hue Sets the picture hue of the output video signal. S yntax #set_hue param1 P ar amet ers param1 Hue [0 ... 100] Example #set_hue 60 PICTURE HUE SET TO 60 Relat ed Commands #get_hue #set_brightness #set_contrast #set_saturation Adv anced Oper ation[...]

  • Page 113

    page | 103 Adv anced Oper ation Commands #set_osd_timeout Sets the OSD (On-Screen Display) time-out delay in seconds. If param1 = 0, then the OSD timeout will be set to “off”. The OSD will be displayed until it is exited, manually . See Moving around within the Menu System (page 9) for more information on how to manually exit the menu system. S[...]

  • Page 114

    page | 104 Adv anced Oper ation Commands #set_output_color Sets the output color space. S yntax #set_output_color param1 P ar amet ers param1 Color space [0 ... 2] param1 Description 0 RGB 4:4:4 1 YCbCr 4:4:4 2 YCbCr 4:2:2 Example #set_output_color 1 OUTPUT COLOR SPACE SET TO YCbCr 4:4:4 Relat ed Commands #get_output_color #set_color_balance #set_c[...]

  • Page 115

    page | 105 Adv anced Oper ation Commands #set_output_mode Sets the output mode. S yntax #set_output_mode param1 P ar amet ers param1 Mode [0 ... 2] param1 Description 0 HDMI 1 DVI 2 Auto Detect Example #set_output_mode 0 OUTPUT MODE SET TO HDMI Relat ed Commands #get_output_mode[...]

  • Page 116

    page | 106 Adv anced Oper ation Commands #set_output_res Sets the output resolution. Resolutions that use reduced-blanking are indicated with “(RB)”. Note the following frequency information: 23 = 23.98, 29 = 29.97, and 59 = 59.94. S yntax #set_output_res param1 P ar amet ers param1 Resolution [0 ... 44] param1 Description 0 640 x 480 / 60 Hz 1[...]

  • Page 117

    page | 107 Adv anced Oper ation Commands param1 Description 22 SD (480i) / 60 Hz 23 SD (576i) / 50 Hz 24 SD (480p) / 60 Hz 25 SD (576p) / 50 Hz 26 HD (720p) / 60 Hz 27 HD (720p) / 59 Hz 28 HD (720p) / 50 Hz 29 HD (720p) / 30 Hz 30 HD (720p) / 29 Hz 31 HD (720p) / 25 Hz 32 HD (1080i) / 60 Hz 33 HD (1080i) / 59 Hz 34 HD (1080i) / 50 Hz 35 HD (1080p) [...]

  • Page 118

    page | 108 Adv anced Oper ation Commands #set_phase Sets the phase adjustment. The default setting is “Auto”. S yntax #set_phase param1 P ar amet ers param1 Phase [Auto, 1 ... 64] Example #set_phase 26 PHASE SET TO 26 Relat ed Commands #get_phase Adv anced Oper ation[...]

  • Page 119

    page | 109 Adv anced Oper ation Commands #set_pixel_clock Sets the pixel clock and saves it to the specied preset. param1 is a oating-point value and can be specied up to three decimal places. S yntax #set_pixel_clock param1 param2 P ar amet ers param1 Pixel clock [0.000 ... 999.000] param2 Preset [0 ... 5] Example #set_pixel_clock 74.25 1[...]

  • Page 120

    page | 1 10 Adv anced Oper ation Commands #set_saturation Sets the picture saturation. S yntax #set_saturation param1 P ar amet ers param1 Saturation [0 ... 100] Example #set_saturation 65 PICTURE SATURATION SET TO 65 Relat ed Commands #set_brightness #set_contrast #set_hue Adv anced Oper ation[...]

  • Page 121

    page | 1 1 1 Adv anced Oper ation Commands #set_sharpness Sets the picture saturation. In order to set the sharpness value, the Edge Enhance setting must be set to User . Refer to the #set_edge_enhance command for details. S yntax #set_sharpness param1 P ar amet ers param1 Sharpness [0 ... 100] Example #set_sharpness 68 PICTURE SHARPNESS SET TO 68 [...]

  • Page 122

    page | 1 12 Adv anced Oper ation Commands #set_test_patterns Enables / disables or sets the test pattern. S yntax #set_test_patterns param1 P ar amet ers param1 Pattern [0 ... 6] param1 Description 0 White 1 Cross 2 Hatch 3 Color 4 Gray 5 Window 6 Off Example #set_test_patterns 2 TEST PATTERNS SET TO Hatch Relat ed Commands #get_test_patterns Adv a[...]

  • Page 123

    page | 1 13 Adv anced Oper ation Commands #set_uo_scan Adjusts the underscan / overscan of the output image. The default value is 0. Negative values produce an “underscanned” image. Positive values produce an “overscanned” image. S yntax #set_uo_scan param1 P ar amet ers param1 Amount (%) [-50 ... 50] Example #set_uo_scan 10 UNDER/OVER SCAN[...]

  • Page 124

    page | 1 14 Adv anced Oper ation Commands #set_vert_active Sets the vertical active pixels and saves it to the specied preset. S yntax #set_vert_active param1 param2 P ar amet ers param1 Pixels [0 ... 9999] param2 Preset [0 ... 5] Example #set_vert_active 720 1 VERTICAL ACTIVE 720 SAVED TO PRESET 2 Relat ed Commands #get_timing_preset #set_horz_[...]

  • Page 125

    page | 1 15 Adv anced Oper ation Commands #set_vert_back_porch Sets the vertical back porch and saves it to the specied preset. S yntax #set_vert_back_porch param1 param2 P ar amet ers param1 Pixels [0 ... 9999] param2 Preset [0 ... 5] Example #set_vert_back_porch 20 1 VERTICAL BACK PORCH 20 SAVED TO PRESET 2 Relat ed Commands #get_timing_preset[...]

  • Page 126

    page | 1 16 Adv anced Oper ation Commands #set_vert_front_porch Sets the vertical front porch and saves it to the specied preset. S yntax #set_vert_front_porch param1 param2 P ar amet ers param1 Pixels [0 ... 9999] param2 Preset [0 ... 5] Example #set_vert_front_porch 5 1 VERTICAL FRONT PORCH 5 SAVED TO PRESET 2 Relat ed Commands #get_timing_pre[...]

  • Page 127

    page | 1 17 Adv anced Oper ation Commands #set_vert_refresh_rate Sets the vertical refresh rate and saves it to the specied preset. param1 is a oating-point value and can be specied up to three decimal places. S yntax #set_vert_refresh_rate param1 param2 P ar amet ers param1 Refresh rate [0.000 ... 9999.000] param2 Preset [0 ... 5] Example[...]

  • Page 128

    page | 1 18 Adv anced Oper ation Commands #set_vert_sync_polarity Sets the vertical sync polarity and saves it to the specied preset. S yntax #set_vert_sync_polarity param1 param2 P ar amet ers param1 Polarity [0 ... 1] param1 Description 0 Negative 1 Positive param2 Preset [0 ... 5] Example #set_vert_sync_polarity 1 1 VERTICAL SYNC POLARITY POS[...]

  • Page 129

    page | 1 19 Adv anced Oper ation Commands #set_vert_sync_width Sets the vertical sync width and saves it to the specied preset. S yntax #set_vert_sync_width param1 param2 P ar amet ers param1 Sync width [0 ... 9999] param2 Preset [0 ... 5] Example #set_vert_refresh_rate 5 1 VERTICAL SYNC WIDTH 5 SAVED TO PRESET 2 Relat ed Commands #get_timing_pr[...]

  • Page 130

    page | 120 Adv anced Oper ation Commands #set_vert_total Sets the total number of vertical pixels and saves it to the specied preset. S yntax #set_vert_total param1 param2 P ar amet ers param1 T otal pixels [0 ... 9999] param2 Preset [0 ... 5] Example #set_vert_total 750 1 VERTICAL TOTAL 750 SAVED TO PRESET 2 Relat ed Commands #get_timing_preset[...]

  • Page 131

    page | 121 Adv anced Oper ation Commands #set_vertical_mirror Enables or disables vertical mirroring. When set to on , the output image is ipped vertically . S yntax #set_vertical_mirror param1 P ar amet ers param1 State [0 ... 1] param1 Description 0 Off 1 On Example #set_vertical_mirror 1 VERTICAL MIRROR SET TO On Relat ed Commands #get_vertic[...]

  • Page 132

    page | 122 Adv anced Oper ation Commands #set_vertical_shift Adjust the vertical position of the output image. S yntax #set_vertical_shift param1 P ar amet ers param1 V ertical shift [-100 ... 100] Example #set_vertical_shift -10 VERTICAL SHIFT IS SET TO -10 Relat ed Commands #get_vertical_shift #get_video_settings #set_horizontal_shift[...]

  • Page 133

    [...]

  • Page 134

    [...]

  • Page 135

    page | 125 VGA & Audio to HDMI Scaler/Converter 4 Appendix Menu System Summary .................................................................................... 126 Default Settings ................................................................................................. 132 Surface Mounting Instructions .............................[...]

  • Page 136

    page | 126 Appendix Menu System Summary 640x480 60Hz 720p 59.95Hz 800x600 60Hz 1680x1050 60Hz 720p 30Hz 1024x768 60Hz 1920x1080 60Hz † 720p 25Hz 1280x768 60Hz 1920x1200 60Hz † 1080i 59Hz 1280x1024 60Hz Auto-Detect 1080p 60Hz 1360x768 60Hz 576i 50Hz 1080p 50Hz 1440x900 60Hz 1080p 29.97Hz 1080p 25Hz 1080p 24Hz 1080p 23Hz 2048x1050 50Hz 2048x1050 [...]

  • Page 137

    page | 127 Menu System Summary Appendix RGB 4:4:4 HDMI YCbCr 4:2:2 Auto Detect OUTPUT COLORSP ACE OUTPUT MODE BACK YCbCr 4:4:4 DVI † Denotes output resolution that supports reduced blanking. Boxes in green indicate the default setting. Information Note the following frequency information: 23 Hz = 23.98 Hz 29 Hz = 29.97 Hz 59 Hz = 59.94 Hz[...]

  • Page 138

    page | 128 Appendix Menu System Summary [0 ... 100] [0 ... 100] [0 ... 100] [0 ... 100] [0 ... 100] Full Red Channel Warm Off Limited Green Channel Blue Channel Neutral Mid Cool Max PICTURE CONTRAST BRIGHTNESS SA TURATION HUE SHARPNESS BACK COLOR RANGE COLOR TEMP . COLOR BALANCE EDGE ENH. Boxes in green indicate the default setting. Appendix[...]

  • Page 139

    page | 129 Menu System Summary Appendix [-50 ... 50] [-100 ... 100] [-100 ... 100] [Auto, 1 ... 64] On On 16:9 Off Off 4:3 Stretch Source ADJUSTMENT UNDER/OVER SCN ASPECT RA TIO H. MIRROR V . MIRROR BACK PHASE H. SHIFT V . SHIFT Boxes in green indicate the default setting.[...]

  • Page 140

    page | 130 Appendix Menu System Summary [Off, 5 ... 60] Display Info Display Info Ye s On No Off SYSTEM OSD TIMEOUT DISP . NOTIFY INPUT RES. INFO FIRMWARE VER. F ACTORY RESET BACK Boxes in green indicate the default setting. Appendix[...]

  • Page 141

    page | 131 BACK Appendix Menu System Summary TEST P A TTERNS White Cross Hatch Color WV -Ramp Off Gray Window H-Ramp WH-Ramp EXIT[...]

  • Page 142

    page | 132 Default Settings Appendix Setting V alue Aspect Ratio Source Brightness 50 Color Balance (Blue Channel) 50 Color Balance (Green Channel) 50 Color Balance (Red Channel) 50 Color Range Limited Color T emperature Neutral Contrast 50 Display Notications On Edge Enhancement Off Horizontal Mirror Off Horizontal Shift Off Hue 50 OSD T imeout[...]

  • Page 143

    page | 133 The Sender and Receiver units can be mounted on any at surface, as shown below (screws not included). There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for connection and disconnection of the DVI cables. For installation on a drywall surface, use [...]

  • Page 144

    page | 134 Specications Appendix Connectors, Controls, and Indicators Video Input • 1 x VGA HD-15, female Video Output • 1 x HDMI T ype A 19-pin, female Audio • 1 x 3.5mm mini-stereo USB • 1 x USB Mini-B, female Power Receptacle • 3-pin, locking Menu • 1 x push button, tact-type Up • 1 x push button, tact-type Dn • 1 x push butto[...]

  • Page 145

    page | 135 Index Appendix A Active pixels horizontal 95 vertical 11 4 Aspect ratio 28 , 55 , 85 Audio Input 3 B Back porch horizontal 96 vertical 11 5 Brightness 19 , 56 , 86 C Color balance 24 , 87 range 22 , 88 saturation 20 , 11 0 temperature 23 , 89 Commands 50 #factory_reset 53 #fw_upgrade 54 #get_aspect_ratio 55 #get_brightness 56 #get_color_[...]

  • Page 146

    page | 136 Appendix Index D Default settings 132 Display notify 37 , 91 E Edge enhance 25 , 92 F Factory reset . See Resetting the unit Features vi Firmware displaying 40 Front porch horizontal 97 vertical 11 6 H Help 83 Horizontal mirror 29 , 93 Horizontal shift 33 , 94 Hue 21 , 102 I Input resolution 39 Installation 4 M Menu system displaying 8 s[...]

  • Page 147

    page | 137 Index Sync polarity horizontal 99 vertical 11 8 width horizontal 100 vertical 11 9 T T able of Contents viii T echnical Support iv T est patterns 42 , 11 2 T iming preset 77 U Underscan 27 , 11 3 Upgrading the rmware 54 USB interface 48 COM port . See COM port: installing V V ertical mirror 31 , 121 V ertical shift 34 , 122 Video sett[...]

  • Page 148

    20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com Stretch it. Switch it. Split it. Gefen’s got it. ® 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com *Pr eferred[...]