Go to page of
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Güde TK 2400 ECO, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Güde TK 2400 ECO one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Güde TK 2400 ECO. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Güde TK 2400 ECO should contain:
- informations concerning technical data of Güde TK 2400 ECO
- name of the manufacturer and a year of construction of the Güde TK 2400 ECO item
- rules of operation, control and maintenance of the Güde TK 2400 ECO item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Güde TK 2400 ECO alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Güde TK 2400 ECO, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Güde service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Güde TK 2400 ECO.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Güde TK 2400 ECO item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
#55166 TK 2400 ECO © Güde GmbH & Co. KG - Birkichstrasse 6 - D-74549 Wolper tshausen - Deutschland English GB 18 Translation of original operating instructions Circular saw bench[...]
-
Page 2
Unit Mobile bench circular saw with a quality aluminium stop and a plastic mitre cut stop, height r eadjustment and mitre adjustmen t b y a hand wheel. Accessories (standard): table ext ension (removable 250 mm) of steel po wder colo ur coated. Dust exhaust, saw disc of sintered m etal, sliding guide rod, emergency switch, stop bar with millimetre [...]
-
Page 3
Guarantee The guarantee exclusively applies to material or manufacturing defects. The original proof of purch ase with the purchase date m ust be submitted when lodging a claim in the guaran tee period. The guara ntee does not include any unauthorised use, e.g. appliance overloading, violent use, damage by a third party or foreign item. T he failur[...]
-
Page 4
Product Safet y Product compliance with respective EU standards Bans: General ban In combination with another pictogram) Do not touch rotating parts Warning: Warning/caution Beware of hazardous electrical voltage Commands Use goggles Use ear protectors Read operating manual before use Environment Protection Wastes to be disposed of in a professiona[...]
-
Page 5
The manufacturer shall not be made liable for damages if general rules and this manual regulations are not observed. Residual Hazards and Protecti ve Action Mechanical Residual Hazards Hazard Description Protective action Residual hazards Cutting, incision Risk of injury caused by rotating parts A contact with rotating band may cause severe injurie[...]
-
Page 6
Operator Requiremen ts The operator shall read the instruction manual carefully before using the unit. Qualification No special qualification is required for use of the unit except for d eta iled direction by a professional. Minimum Age Only persons above 16 years of age are allowed to work with the unit. . Exempted from the provision is the use of[...]
-
Page 7
+ Fig. 4 Structural group 4 Required structural groups Delivered parts and accessories Structural group 3 Fig. 1 – pos . 8/8 x Fig. 1 – pos. 9/8 x Fig. 1 – pos . 10/8 x Fig. 1 – pos. 3/4 x Fig. 1 – pos . 16/2 x 23[...]
-
Page 8
Fig. 5 Structural group 5 Required structural groups Delivered parts and accessories Fig. 6 Structural group 4 Fig. 1 – pos. 12 Fig. 1 – pos. 14 Fig. 1 – pos. 13 Fig. 1 – pos. 15 Initial Operation Safet y Instruction • Unplug the unit before any adjustment and maintenance . • Caution! Rotating saw disc may hurt hands a nd cut fingers of[...]
-
Page 9
• Use only perfect saw discs. I.e. sharpened, without any cracks, fissures, deformations etc. Faulty discs have to be replaced immediately. • Be particular about the arrow on the disc pointi ng on the same dire ction as that on the unit. . • The unit protection devices ma y never be removed or removed from operation in a ny way. • Damaged o[...]
-
Page 10
Mitre cut stop Fig. 8 • Put the mitre cut stop (Fig. 2/pos. 14) in the respective clamp on the bench. • Release the mitre cut stop (Fig. 2/pos. 14) with the knurled screw . Turn the stop for the arrow to stop at a required angle • Retighten the knurled screw Caution: Do not move the stop too far in the direction of the saw disc! The distance [...]
-
Page 11
Lengthwise Cut ting Fig. 12 • Set the parallel stop (Fig. 2/pos. 3) at the required width in relation to the saw disc. . • Lay the work on the bearing surface are, the flatter/wider side should lay flat on the saw bench. • Guide the wider work with hand, the smaller one with use of a sliding guide rod (Fig. 1/pos. 11). • Caution: Keep a lar[...]
-
Page 12
Splitting w edge set-up Fig. 15 • Remove the saw disc cover (Fig. 2/pos. 1). • Remove the removable part of the bench and loosen both the screws on the bench area . • Loosen the screw on the wedge so that the wedge may be shifted – see the type of cut at issue . • Retighten the screw, put the part of the bench in place and fix it . • Pu[...]
-
Page 13
Fig. 18 Inspections and Mainte nance Unplug the unit before any works on it. • Use a damp cloth to clean plastic parts. Do not use detergents, solvents and pointed things either. • Clean any dirt from the bench surface with a suitable curing compound spra y. • If the engine braking time is more than 10 s, the fast wearabl e pa rts of the engi[...]
-
Page 14
Fig. 22 • Put wrench 13 on the disc spindle . Fig. 23 • Take the belt from the pulley using the screwdriver while turning the disc spindle in the direction of the small pulley. Fig. 24 • Turn until the belt is completely taken off the small pulley . Fig. 25 • Now, take the belt off the big pulley. • Push the worn belt through the pulley a[...]
-
Page 15
Fig. 29 • Finished! The saw is in working order again . Inspection and Mainte nance Safety Instructi ons Only a unit maintained and cared for on a regular basis may be a serviceable aid. Insufficient maintenance and care m ay result in emergencies and unforeseen accidents. Inspections and Mainte nance Schedule Time Interval Description Other Deta[...]
-
Page 16
EC Declaration of Conformity We herewith declare Güde GmbH & Co. KG Birkichstraße 6, 74549 Wolpertshaus en, Germany That the follo w ing Appliance complies with the appropriate basic safety and health requirements of the EC Directiv e based on its design and type, as brought into circulation by us. In a case of alternation of the machine, not[...]