Haier D1200P manual

The information in this User Guide is based on the production standard model of the D1200P CDMA mobile phone. As Haier T elecom Company follows a policy of continuous development, the company reserves the right to make adjustments, changes or revisions to all information given herein, without prior notice. Haier T elecom Company makes no warranty o[...]

Welcome Connect to the world with the new Haier D1200P CDMA. Slim lines belie the power packed into its sleek ergonomic frame. Easy format schedule organizer . Call restriction. Sophisticated features give you every practical advantage in today's world of fast paced communication. Enhance your routine and give yourself a new horizon to experie[...]

Contents 1.Essential information ....................................................................................1 2. Handset guide ..............................................................................................5 4. Input method ..............................................................................................66 5.USB[...]

[...]

1 1.Essential information Given here is essential information that will help you in the optimum operation of your mobile phone. By adhering to these guidelines you will be protecting yourself from unnecessary personal or financial damages or infringements of the law . Kindly read the User Guide in its entirety for complete information. T raffic reg[...]

2 chemicals or particles, such as grain, dust, or metal powders; or any other area where you would normally be advised to turn off your vehicle's engine. Electric or static sparks in such areas could cause an explosion or fire resulting in serious injury or even fatalities. Switch off your phone on aircraft Follow airline advisories on phone u[...]

3 governing the usage of wireless technology . Advisory for persons with Pacemakers: AL W A YS keep the phone more than six inches from your pacemaker when the phone is turned on. Do not carry the phone in a breast pocket. Preferably use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect int[...]

4 has no RUIM card Emergency call procedure: T ype in the local emergency number and press the send key . Emergency call numbers are: 100/101. Electronic devices Most modern electronic equipment is shielded from Radio Frequency (RF) energy emissions. However , certain electronic equipment may not be shielded against the RF signals emitted by your p[...]

5 Protect your phone from rain, spilled beverages or other forms of moisture that can damage the electronics of your phone. Use the batteries and fittings manufactured by Haier T elecom Company only . The use of other fittings may cause dangerous accidents and void all warranties. Do not disassemble the phone or its accessories. If service or repai[...]

6 2.1 Keypad 2.1.1 Power /End key The red key on top right corner of the keypad is power key . Pressing and[...]

7 holding the key can switch on/off the mobile phone. Pressing the key once can end a call during a phone call, or pressing the key twice can reject an incoming call. Pressing the key in the menu can also return to the idle mode. The green key on top left corner of the keypad is the send key . Y ou can dial or answer a call with the key . In idle m[...]

8 Up key: Press this key to enter the Profiles menu directly . Left key: Press the key to enter the Scheduler menu directly . Right key: Press the key to enter the Messages menu directly . Down key: Press the key to enter the Names list. The OK/Hot key places within the 4-way navigation keys. Pressing this key in idle mode allows you to access the [...]

9 Pressing these keys can enter the digits 0 to 9 (in idle mode or in number- inputting mode) or some associated characters (text editing mode) and perform associated functions (in a list). Y ou can adjust the earpiece volume using side keys directly during a call or in idle mode except vibrate only mode . Depending on your wireless service provide[...]

10 message icon disappears when you read all the unread messages. 2.2.1.3 Full message When the SMS storage is full, the icon appears and the phone display shows '' One or more messages must be erased before the new message can be stored. SMS capacity full. Pls erase msg to proceed 2.2.1.4 Alarm clock The icon appears when the daily alarm[...]

11 When a profile is available, the icon corresponding to the profile name is displayed in idle mode: Vibrate only: For use when vibrate only is needed. Silent:For use when silence is needed. General:Is the default setup. Outdoor:For use in the outdoor . Meeting:For use in a meeting. The default setup is the silent mode. Headset:For use when insert[...]

12 When the new message is received: 1.Y our phone makes alert tones (ringer, vibration or silence). 2.If the keypad is unlocked, your phone display will show ' '. Press key to view the message's contents and then press key again to operate options. Press key or key to return to the idle mode, the new message-prompting icon is displa[...]

13[...]

14 2.3.3 Installing the RUIM card 2.3.4 Removing the RUIM card Purchase a RUIM card from network operator . Y our phone number and registration information are stored in your RUIM card. Y our RUIM card can be used in any a CDMA phone. Y our number and information will not change. Make sure to switch off your phone before taking out the battery . Ma[...]

15 2.4 Charging the Battery The D1200P can be charged either when it is switched on or off. 1.Plug the charger transformer into a standard outlet. 2.Insert the charger output plug into charging connector of the bottom of the phone. 3.The rolling of the electric quantity bar indicates that the phone begins to charge. 4.When the battery level full an[...]

16 It is recommended that you charge the battery for three hours (full charging period) before you use it. Do not pull out the plug of the charger during charging to avoid electrical damage to the phone and the charger . If you connect the headset with the phone, it will be to activate headset mode or to match the volume of headset with that of mob[...]

17 lock code (if required). If the RUIM card is invalid, the phone displays ' ', please contact your network service provider . In the instances above mentioned, press key to only dial emergency call. Y ou can set protection code (PIN CODE) in order to prevent random using of your phone by others. Each time you restart your phone, the pho[...]

18 the RUIM card will be automatically locked. In this condition, the phone will prompt for PUK (PIN Unlocking key). Y ou can get the PUK from your mobile phone service provider . The phone lock code is used to protect your phone from unauthorized use. It can be set automatically to lock your phone each time it is switched on or when in idle mode. [...]

19 numbers. T o indicate that you are dialling a number , the word displays the screen. If the call is not answered and you want to end the call, press key . If the call is connecting, the display will change to press key to end the call. The mobile phone can store no more than 30 latest call logs (incomings, outgoings and missed calls). 1.In idle [...]

20 Speed dial is a fast way to call one of your special numbers. See ' ' menu. Press and hold key until ‘+’ appears on screen. Enter the country code, area code (without prefix zero) and phone number . Press key to dial. Y ou can end a call at any time by holding down the key till the call has been terminated. When you receive a call,[...]

21 2.9.1 Mute 2.9.2 Names 2.9.3 Menu T emporarily turns the microphone off during a phone call. Reselect this option to resume your conversation. This function allows you to access the Names menu. By using this feature, you can directly enter the menu list. Y our RUIM card can be used in the handset for accessing the menu options detailed below . I[...]

22 3.1.1 Write message Allow user to edit text message. When composing text messages, check the number of characters allowed in the top right corner of the message. Per message can contain up to 160 characters. If you cross the limit, the phone prompts with a ' ' pop-up message. Press numeric key to input corresponding characters. Press a[...]

23 Y ou can use the Send to group option, scroll through a list of groups and select the one you want to send. 3.1.1.4 Insert number When composing an SMS message, you can use the Insert number option, scroll through names list and select the number you want to insert into your new text message. 3.1.1.5 Save message Y ou can use the save message op[...]

24 The sender's phone number is displayed. When the sender's phone number is stored in the contacts list, the sender's name is displayed instead of the phone number . Press key to display the whole message details, the message contents, the phone number who sent it and when it was received. Here pressing key allows you to call the se[...]

25 From the message view , you can choose to access the following options: 3.1.2.1 Reply Y ou can reply to the sender after opening the received message. 3.1.2.2 Forward Y ou can forward the received message to desired number.[...]

26 3.1.2.3 Use number If the Numbers available haven't been stored into the contacts list, you can save it. If the number has been stored into the contacts list, the phone displayed ' '. 3.1.2.4 Erase This number already exists Allow you to erase the selected message. 3.1.2.5 Connect URL Allow you to get the URL (starting by http://)[...]

27 Erasing messages from the Draftbox can free up additional memory on your phone. 3.1.5 V oice mail If you subscribe to voice mail, your service provider will furnish you with a voice mailbox number . Y ou need to save this number to your phone to use voice mail. By setting the call forwarding function, the incoming call is forwarded to your voice[...]

28 Erase: Erase the selected quick text. Add new: Enter the text-editing interface and then save it. Send: Y ou can send the selected quick text. Y ou can set no more than 5 groups, and you can add the member from the phone memory and the RUIM card memory names to any group. By pressing key you may enter the following menus: 3.1.7.1 Send Allow you [...]

29 3.1.7.4 Clear all groups Y ou can clear the members of all groups. Access the Erase messages option to specify exactly which type of message you want to erase. By selecting , you can erase messages from the inbox folder . By selecting , you can erase messages from the outbox folder . By selecting , you can erase all the messages in the draft fol[...]

30 3.1.9.3 Deferred delivery Allow you to select 'Immediate', 'After 1hr', 'After 5hr' or 'After 1day' option. Y ou can choose the time when you want your message to be delivered. Note: This function is depended on the service provider's network. 3.1.9.4 Priority The function allows you to select Normal,[...]

31 displayed through network. The network determines whether this function is effective or not. 3.1.9.9 Storage device Y ou can select storage device in which the SMS can be stored in RUIM, phone, RUIM and phone. 3.1.9.10 Send default message Allow you to select 'On' or 'Off' option. If you select 'On' option, the defa[...]

32 missed/received/dialled calls. With this function, you can view and erase no more than the last 30 missed calls you have received. Y ou can also send a message to any missed call. See 'Detailed call records'. With this function, you can view and erase no more than the last 30 incoming calls. Y ou can also send a message to any received[...]

33 Dialled call: T o view when it was dialled, call duration and the phone number who received it. If the selected phone number cannot be stored in the contacts list, you can press to save it,otherwise just view it. Y ou can send message to the available number. Y ou can call the available number. Y ou can erase the selected call record. This funct[...]

34 Phone displays the time used by the last call since the counter was reset. 3.2.5.2 T otal received calls Phone displays the time used by received calls since the counter was reset. 3.2.5.3 T otal dialled calls Phone displays the time used by dialled calls since the counter was reset. 3.2.5.4 Reset all Y ou can reset the counter of the calls time[...]

35 2. Press up/down key to highlight the profile you wish to activate, then press key to enter . 3. Press up/down key to highlight the 'Select profile' option, then press key to activate. For short access to the profile mode press up navigation key in idle mode. When a profile is set, the icon which corresponds to the profile name is disp[...]

36 By pressing key , you can activate the vibrate only option of the profile. Select profile: if you need a quiet environment, you can activate the silent option of the profile. Edit profile: According to the quiet environment, you can customize the profile mode. See 'Edit profile'. Select profile: you can set the profile available as gen[...]

37 profile. Edit profile: According to the meeting environment, you can customize the profile mode. See 'Edit profile'. The default setting is the vibrator mode. Select profile: if you insert the headset, you can activate to the headset mode immediately . Edit profile: According to the ambience, you can customize the profile mode. See &ap[...]

38 Allow you to adjust the volume of the Ringer . Allow you to adjust the volume of the earpiece. Allow you to adjust the volume of the key . The message alert types have: Vibrate, Silence, T wo beeps, Four beeps and Ring. Y ou can select different new SMS ringer formats. The phone provides 5 SMS Ringers. Y ou can Change the status of alerts detail[...]

39 to help the user know how many minutes have gone by while they are talking (if conversation is short). When a call has successfully connected, an alert will sound. When a call has successfully ended (either by you or because the call is dropped), an alert will sound. When alert for fail on outgoing is on, phone sounds an alert after failing on o[...]

40 3.4 Settings Settings allow you to customize your phone as per your preferences. Y ou can customize your display by creating a banner, adjusting the backlight, adjusting LCD contrast, selecting theme color , setting clock to show or hide, selecting the language, selecting the wallpaper , selecting the menu style. 3.4.1.1 Banner Y ou can set the [...]

41 Y ou can set the clock whether show on the idle screen or not. 3.4.1.6 Language Allow you to set the displayed languages. 3.4.1.7 W allpaper Allow you to set the wallpaper displayed on idle screen. The phone provides 6 kinds of paper . 3.4.1.8 Menu style Y ou can select different style of the function. The phone provides 3 styles (Under water , [...]

42 3.4.3 Security Security menu protects your phone from unauthorized use. Before accessing this option, you will be asked to enter lock code (The default is 000000). 3.4.3.1 Lock mode This option is used to set the lock code. The lock code can be set to protect your phone from unauthorized use. It can be set to automatically lock your phone each t[...]

43 This option is used to change the lock code. After selecting this option, you will be asked to enter new lock code to replace the old code. The new lock code must be entered again as confirmation. 3.4.3.3 Reset Allow you to restore your phone to the factory settings. 3.4.3.4 PIN Management This option is used to set and change the PIN code. The [...]

44 The phone will ask for enter a new 4~8 digits code to replace the old PIN code. The new PIN code must be entered again as confirmation. 3.4.3.5 Call restriction With the Call restriction, you will be asked to enter password before accessing the particular restricted option (The default is 000000). This function includes the following options: If[...]

45 Call forward is a network service. This service is used to forward incoming calls to your voice mail system or to another number depending on certain conditions in which your phone is unavailable or you don't want to receive any call. 3.5.1.1 Unconditional This function will unconditionally forward all incoming calls to voice mail or other [...]

46 3.5.3 Any key answer 3.5.4 Auto redial 3.5.5 V oice privacy 3.5.6 International call prefix 3.5.7 Show call time If it is set to on, it allows you to answer an incoming call by briefly pressing any key except the Power key and V olume side key . If it is set to on, it allows you to automatically redial the number if the first attempt was unsucce[...]

47 3.6 T ools 3.6.1 Scheduler 3.6.2 Alarm clock Y ou can use the scheduler function to set reminder/alerts for various events, meetings and more. The time entry is available in a 12-hour format only . 3.6.1.1 Add new Y ou can set date on the calendar. Inputting the information to the phone and then add alarm clock time. If the alarm time can be set[...]

48 3.6.2.1 Quick alarm The quick alarm clock can set different alarm times ‘After 10min’,‘After 30min’, ‘After 1h’, ‘After 3h’, ‘Off’. The alarm can't be used when the mobile is power of f. 3.6.2.2 Snooze mode It can be set to turn off the alarm completely by pressing any key when the alarm wakes up. When the alarm goes off[...]

49 T o clear the entered number or operand, press key [Erase]. T o calculate the result, press key [Result] or press key [=]. 3.If you wish to start a new calculation, press key [Reset]. 4.If you close the calculator function, press key [Back]. For a limited degree of accuracy , this function should only be used for reference. This function allows [...]

50 In the process of the timing, press key [Split] every time you need to count a lap. Press up/down navigation key to look over the former records. For the limited degree of accuracy , this function should only be used for reference. 3.6.7.1 Kong ming If you have saved the former game record, you can choose, start or resume game, or select game to[...]

51 phone. The default lock code is 000000, but user can change the password in security menu. The information includes Messages, Contacts, Call history , Alarm clock and Scheduler . Select any of the information and press key , allows you to access the following options: Press key to validate making tick in checkbox. Press key again to cancel this [...]

52 1.Press key to enter the black number list. 2.Select any one of records and press key , the phone displays the following options: Allow you to modify the black number or search from contacts to add. After that press key to select Ok option to confirm. Allow you to erase the selected black number . By using this function, you can erase all black [...]

53 the Incoming Call Guard will not work. Y our phone supports WAP 2.0. Y ou can use this facility to connect to selected services on the mobile Internet. This menu option allows you to download a host of exciting content with WAP browser . Simply browse on the web page and download from a wide selection of Ringtones, W allpapers, and other applica[...]

54 New Bookmark New Folder Open URL Page Folder Sound Folder Image Folder Y ou can write and save the new bookmark. Y ou can create new folder to save bookmark. 3.8.1.4 PHSH messages List of PUSH messages received. 3.8.1.5 Advanced By pressing key , you can access the following options: Y ou can input web page address of a site you want to visit an[...]

55 Advanced Option Clear Cookies Set Background Music Setting Set Gateway Select Gateway Restore Setting Help Y ou can customize these options in this menu. Clear history record of browsed web pages. Y ou can set the background music whether open or not while browsing web page. Y ou can change some settings in this menu. Y ou can set gateway as per[...]

56 Arrow: scroll display and switch focus; Left Arrow:go forward; Right Arrow: back; Select Key: OK; Left/Right Softkey: correspond to display; Send Key: interrupt the downloading; Keep Pressing * key: page up; Keep Pressing # key: page down; Information of W AP you use. 3.8.1.6 Exit Browser Stop the connection to the network and return to the uppe[...]

57 In this menu user can view downloaded images, music ring tones and available memory status for W AP etc. Y ou can download images from mobile Internet sites and manage them. The function allows you to download music from mobile Internet sites, and then to manage them. The user can download other information from mobile Internet sites. The functi[...]

58 3.9.5.2 Ascend/Descend Y ou can sort the information downloaded from mobile Internet by Ascend or Descend. Y ou can store names and phone numbers in your phone or RUIM card memory . In idle mode, press to access the names function. 3.10 Names[...]

59 3.10.1 List Y ou can use this function to search records, to dial directly , to execute erase, copy or send a message and to edit operations. Press key to enter the names list. If you need to browse phonebook's information, input the alignment characters, your mobile phone will then attempt to match the characters with the names in[...]

60 your Phonebook. Once the number you prefer is displayed, you can press key to call this number . Select any record and press key to access the following functions: 3.10.1.1 Details In a contacts list, you can view the following items: Name: Up to 14 characters Number: Up to 20 digits, 3 phone numbers Address: Up to 150 characters Email: Up to 64[...]

61 For details operations please refer to 'Details Submenus'. Details Submenus function as following: Allow you to send the message to the selected number . Y ou can erase the desired entries. Y ou can edit the saved number, name and group. 3.10.1.2 Find Y ou can search a phone number from the phone book names. Please refer to ' &apo[...]

62 network service providers. If you add a new item to the phone memory , you need to enter one of the following: Phone Number , Address, Email, URL and Note, and you can select a group and ring tone for incoming call. If you add a new item to RUIM card, you need to enter: Phone Number . This function is used to search a phone number from the phone[...]

63 With the copy function, you can copy items stored in RUIM card memory to phone memory . and vice versa. 3.10.4.1 All Copy Allow you to copy all of the RUIM card memory entries to phone memory and vice versa. 3.10.4.2 Choice Copy Y ou can selectively copy the record. Y ou can select one or more of the entries from the names list to copy it. After[...]

64 Note: : The icon indicates that the names list has been selected. Note: No members, add new member? : Y our mobile phone provides 9 groups in which 7 groups are by default other 2 groups can be added. There are seven groups, including No group, Family , Friends, Colleagues, VIP , Business and Personal. Y ou can allocate the phone memory and the [...]

65 Y ou can add two new group names to the phone. Before accessing this option, you will be asked to enter lock code (the default is 000000). This feature allows complete erasing of all contacts either in RUIM card memory or Phone memory; the information thus deleted is unrecoverable. Speed dial is a fast way to call one of your special numbers. Y [...]

66 Y ou can check the memory status of the RUIM card and phone memory , including free memories and total memories. This mobile phone uses the eZi input Method. When using your mobile phone there will be many times that you will need to input text e.g. sending messages, entering names into the Phonebook, editing the greetings message, etc. Under th[...]

67 1.T ap the key several times until 'Abc' is displayed in the top-right corner of the screen, then you can type the first letter in uppercase. When you have typed the first letter , 'Abc' will be changed to 'abc' automatically . 2.T ap the key several times until 'abc' is displayed in the top-right corner o[...]

68 The following steps show how to write a text by using these input methods: 1.In text-editing mode, tap key several times until 'En' is displayed at the top- right corner of the screen. 2.Press each key once, even when the letter you required is not the first letter on the key . For example, to enter the word 'Mary', press 6,2[...]

69 communicate with devices. This installation guide is intended to provide a detailed description of the USB Windows device driver installation process. We will supply an accessory CD including this driver . Upon successful completion of the installation process, the following files will be located in the specified directories folders: C:Program [...]

70 1.T o install the USB Windows device driver , you must first start the Setup application, ViaUsb_Setup.exe, by double-clicking the associated icon. 2. The USB Windows Device Driver Setup W elcome dialog box will appear . Figure 1-USB Windows Device Driver Setup Icon Figure 2-USB Windows Device Driver Setup Welcome Dialog Box[...]

71 3.Click the button to continue. The License Agreement dialog box appears. 4. T o continue, you must accept the License Agreement by clicking the button. If you select the button, the following dialog box will appear , confirming whether you truly wish to terminate the installation process at this time. Next Ye s No Figure 3-USB License Agreement[...]

72 Figure 4-USB Windows Device Driver Setup Process T ermination Confirmation Dialog Box Figure 5-USB Setup Customer Information Request Dialog Box If you select the button, the installation process is terminated. If you select the button, the License Agreement dialog box (Figure 3) will reappear. Upon agreeing to the License Agreement (Figure 3), [...]

73 The USB Installation Status Message dialog box will then appear indicating what percentage of the file copying task is complete. Upon completion of this step, the following message box appears. Figure 6-USB Driver Installation Operation Status Message[...]

74 Figure 7-USB Device- Discovery Action Request Message Figure 8-Windows Device Manager's Device-Discovery Notification for the USB Hub/ETS/Moderm 6. Click and connect the PC and the phone using the USB cable that we supplied. Then the following message box will only appear for a very short period of time, followed by the Window Hardware Inst[...]

75 Figure 9-Windows Device Manager's Device Discovery Notification for the CBP USB Modem Device Figure 10-Windows Device Manger's Device List After Successful Installation of the VIA USB Devices Note: 7. An examination of the Windows Device Manager's device list (as depicted in Figure 10) will evidence the successful installation of [...]

76 This USB driver just supports windows 2000 and windows XP operating system. If the 'Digital Signature Not Found' dialog box (like Figure 1 1) appears, you need only click the button. Figure 1 1-Windows Device Manager's Device-Discovery Notification that the CBP USB Modem Device- Driver Lacks WHQL Certification Ye s 6. Modem instal[...]

77 1. Connect the PC and the phone using the cable that we supplied. 2. Add a new windows standard modem driver , i.e. Install process: Enter Control panel Enter Add/remove a hardware Enter add a new device Install a new modem Choose a modem driver[...]

78 Recommend: Standard 56000 bps v90 modem for windows 2000 Standard 33600 bps modem for windows XP 3. Make a new dial-up connection Enter Network and Dial-up Connections Make new connection Click Next as follow 4. Dial-up to the network[...]

Dial-up directly for windows XP Y ou will be asked to enter the user and password when log on for windows 2000. Y ou can get the user and password from your mobile phone service provider. Here you will find answers to questions that you may have about your Haier D1200P mobile phone. Q. What is my Security Code? A. The Default Security code is 00000[...]

suggested that you change this code immediately . Q. How to change the RUIM Lock? A. Settings Security Enter Lock code (By Default lock code is 000000) PIN Management Change PIN Enter old PIN (By Default PIN is 1234) Enter new PIN Repeat new PIN Ok Q. How to enable RUIM Card Lock? A. Settings Security Enter Lock code(By Default lock code is 000000)[...]

Ok Q. How do I reset my phone's call timer? A. Call History Call duration Reset all Ok Q. How do I find my phone's ESN (electronic serial number)? A. T urn off your phone. Remove the battery from the back of the phone. Y our phone's ESN number is printed on the sticker that is pasted on the rear cover , and is labelled ‘ESN.’ Q. [...]

82[...]

83[...]

84[...]

85[...]