Hitachi 32PD5300 manual

USER'S MANUAL MANUEL UTILISA TEUR BEDIENUNGSANLEITUNG READ THE INSTRUCTIONS INSIDE CAREFULL Y . KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your monitor . SERIAL NO. The serial number is located on the rear of the monitor . This monitor is ENERGY STAR ® compliant when used with a comput[...]

NOTE: The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. TRADEMARK ACKNOWLEDGEMENT VGA and XGA are registered trademarks of International Business Machines Corporation. APPLE and Macintosh are registered trademarks of Apple Computer , Inc. VES[...]

1 ENGLISH USER'S MANUAL Thank you very much for purchasing the HITACHI Plasma Display Monitor. Before using your monitor, please carefully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the monitor properly. Keep this manual in a safe place. You will find it useful in the future[...]

2 Important Please read this User's Manual thoroughly, especially the Safety Instructions on Page 4 to 7. Mis-use may cause damage to your plasma monitor, which could shorten its lifespan, or cause injury to yourself. Should you encounter any difficulty in the set-up or operation of your monitor, firstly refer to the Troubleshooting guide at t[...]

3 ENGLISH CONTENTS FEATURES ....................................................2 SAFETY INSTRUCTIONS ..............................4 COMPONENT NAMES ..................................8 Main Unit ..............................................................................8 Remote control ...........................................................[...]

4 SAFETY INSTRUCTIONS This Plasma monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage[...]

5 ENGLISH • FOR THE CUSTOMERS IN THE U.K. THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K. PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a molded plug incorporating a fuse, [...]

6 PRECAUTIONS • Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places. • Hot places such as near heater, place exposed to the direct rays of the sun. • A[...]

7 ENGLISH • Prevention of an obstacle to Radio receivers This monitor has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers. - Keep the monitor away from Radio. - Adjust Radio antennas in order for the monitor not to receive interference. - The antenna cable of Radio should be kept away fro[...]

8 Caution when moving the main unit • As this product is heavy, whenever it is moved, two people are required to transport it safely. • Whenever the unit is moved it should be lifted forwards using the two handgrips at the back, and the unit should then be held at the base on both sides for stability. COMPONENT NAMES Front Cabinet (front frame)[...]

9 ENGLISH Remote contr ol ID SET button 16 POWER OFF button 13 POWER ON button 13 POWER ON/OFF button 13 MENU button 16 MUTE button 14 VOLUME UP/DOWN buttons 14 RETURN button 16 RECALL button 15 AUTO button 16 PinP button 34 ID button 16 SELECT/ADJUST buttons 16 OK button 16 Loading Batteries 1. Open the battery cover. • Slide back and remove the[...]

10 Anti-tumble measur es Securing to a wall or pillar Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar. Securing desktop 1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown. 2) Using commercially available wood screws, secure the set firmly in position[...]

11 ENGLISH Read SAFETY INSTRUCTIONS ( to ) carefully to ensure maximum safety before proceeding to these steps: • Choose an appropriate site and install the product on a level table where the stand is secure. • Install the monitor to have ready access to a power socket available. • Make sure that the power switch of this device is turned off.[...]

12 ① Connect the power cord to this device. ➁ Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.) Connect the power cord, after completing all other connections. ① ➁ INST ALLA TION INSTRUCTIONS (continued) Power Cor d Connection • Use only the power cord provided. • Do n[...]

13 ENGLISH OPERA TING INSTRUCTIONS T ur ning Power On and Of f • To turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button or the ON/OFF or ON button on the remote control. • To turn the monitor power OFF, press the SUB POWER button or the ON/OFF or OFF button on the remote con[...]

14 AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU ID ID SET OPERA TING INSTRUCTIONS (continued) Audio Mute The audio volume can be temporarily mute by pressing the MUTE button of the remote control. • When a button is pressed, the volume adjustment status guide (magenta) will be displayed. • The volume setting can be[...]

15 ENGLISH Size Switching Each time the SIZE button of the remote control or the monitor is pressed, the screen display area will change in sequence and the status will be displayed at the bottom of the screen. * Real mode gives the image of the same shape as it is displayed on a computer monitor. This mode is only available for VGA (640 X 480) and[...]

16 AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU ID ID SET ID SET button ID button AUTO button Using the Menu Scr een (On-scr een display system) When the MENU button is pressed, the adjustment menu screen will be displayed; from there, PC signal adjustment and setting is possible by using the SELECT button, ADJUST butt[...]

17 ENGLISH PICTURE MENU Picture Audio T imer Function Setup L anguage Select OK Set Picture Contrast : + 31 Brightness : – 31 Colour : 0 Hue : + 31 Picture Enhancement : Off Colour T emperature : Normal Colour T emp.Adjust Reset Reset Select Set Return OK Picture Contrast : + 31 Brightness : – 31 Colour : 0 Hue : + 31 Picture Enhancement : Off [...]

18 Selected characters Setup hint Audio Mode Movie Music Speech Favourite Movie: This selects the audio suitable for Movie. Music: This selects the audio suitable for Music. Speech: This selects the audio suitable for News, Talk show etc. Favourite: This mode should be adjusted depending on user’s preference. Treble Suppresses treble. Enhances tr[...]

19 ENGLISH Picture Audio T imer Function Setup L anguage Select OK Set Function Screen Saver Off Screen Wipe On 60 M in. Black Side Panel Off V ideo Power Save Of f Freeze M ode Split Default Zoom Panoramic Reset Reset Select Set Return OK MENU FUNCTION MENU Function Panel L ife Normal M ode Display Off ID Number 1 Inverse On 60 M in. Standby White[...]

Selected characters Setup hint Auto Adjust* (Menu) Adjust Pressing the OK button here, Automatic regulation is started. Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are adjusted automatically. Horizontal Position Moves the horizontal position to left. Moves the horizontal position to right. Adjust the left-side display p[...]

21 ENGLISH LANGUAGE MENU Picture Audio T imer Function Setup L anguage Select OK Set L anguage English Français Deutsch Español Italiano Norsk Svenska Select Return Exit OK MENU Select a language by ▼ ▲ SELECT buttons and press the OK button. OTHER FEA TURES Automatic Stor e Approximately 1 sec. after adjustment is completed, the adjustments [...]

22 Signal Check Status Display Action When Mode Display is set to ON, the input signal is switched or when the RECALL button is pressed. A guide is displayed for the input terminal and the horizontal and vertical sync frequency. When the sync signal is no longer detected. • A guide displays No Sync. Signal, and Power Save (for approx. 5 sec.) •[...]

23 ENGLISH NOTES About screen defects • High precision technology is used in the making of plasma panels but there may be dark spots (points that do not illuminate) and bright spots (points that are too bright) in some cases. These do not indicate a malfunction. About residual images • In some cases, residual images may remain after the short-t[...]

24 Symptoms That Seemingly Appear to be Failur es Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. TROUBLESHOOTING Customer servicing can be hazardous. W ARNING Symptom Point to check See page • No picture with the power-indicating lamp off. • Check the way the power ca[...]

25 ENGLISH Symptom Point to check See page • The temperature of the display panel surface is high. • The plasma display panel is lighting the phosphors by the discharge of internal radiation. In some cases, this may cause the temperature of the panel surface to increase. Please note that this is not a malfunction. - • There are locations on t[...]

26 Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (only for RGB2) Actions to Corr ect Abnor mal Displays Symptom 1 Text displayed across the screen appears vertically streaked, with some characters blurred (figure 1). The display image appears flowing (figure[...]

27 ENGLISH Product specifications and designs are subject to change without notice. PRODUCT SPECIFICA TIONS • The monitor takes at least 30 minutes to attain the status of optimal picture quality. Signal Input RGB terminal (D-sub 15-pin connector) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 • When different kinds of input signals are simultaneously inp[...]

28 Signal Input (continued) 12 3 45 6 7 8 91 0 1 1 1 2 1 3 1 4 1 5 1 6 17 18 19 20 21 22 23 24 PRODUCT SPECIFICA TIONS (continued) DVI terminal (DVI-D) Pin Input signal Pin Input signal 1 T.M.D.S. Data2- 14 +5V Power 2 T.M.D.S. Data2+ 15 Ground (for+5V) 3 T.M.D.S. Data2/4 Shield 16 Hot Plug Detect 4 T.M.D.S. Data4- 17 T.M.D.S. Data0- 5 T.M.D.S. Dat[...]

29 ENGLISH • The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase. • The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it. • The monitor differ[...]

30 SUPPLEMENT[...]

M onitor rear panel Speaker (R) Speaker ( L ) Power cord 31 ENGLISH Optional V ideo Unit Function Additional functions when the optional video unit is installed are as follows: ( ) Use if the video equipment has an S video input terminal T o RGB, video and audio input terminals T o SCART terminal T o S video output terminal T o audio output termina[...]

32 OPERA TING INSTRUCTIONS Input Switching AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU • Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control. • Input can be switched in the sequence of AV1 ➔ AV2 ➔ AV3 ➔ AV4 ➔ RGB1 ➔ RGB2 by pressing the INPUT SELECT button[...]

33 ENGLISH ATTENTION Using a wide-screen monitor • This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image would appear different from the original. Take this into consideration when making screen mode choices. • Use of this monitor in its enlarged di[...]

34 OPERA TING INSTRUCTIONS (continued) Displaying MUL TI PICTURE If the PinP button on the remote control is pressed MULTI PICTURE will display. Activating the P-in-P mode from the RGB input screen Pressing the PinP button one time will display 2 pictures. • This mode can be available from RGB1(DVI-PC) and RGB2(RGB) input. • The speaker icon ca[...]

35 ENGLISH Picture Audio Tim er Function Setup L anguage Select OK Set Picture Picture M ode Dynamic Contrast +31 Brightness -31 Colour 0 Sharpness +15 Hue 0 Colour T emperature Normal Contrast M ode Normal Reset Reset Select Set Return OK OK MENU Picture Dynamic YNR Off CNR Off Film M ode On P A L Comb Filter On L TI Off CTI Off Black Enhancement [...]

36 OPERA TING INSTRUCTIONS (continued) PICTURE MENU (continued) Selected characters Setup hint Picture Mode Dynamic Natural Dynamic: This setting is best for very bright ambient lighting. Natural: This setting is for normal lighting conditions. Contrast Narrows the gap between brightness and darkness. Broadens the gap between brightness and darknes[...]

37 ENGLISH Selected characters Setup hint Colour Management Off On Turn On when the original balance of each colour is required to adjust depending on the user’s preference. Magenta Magenta is weakened. Magenta is strengthened. This adjusts listed colours individually to make them either deeper or more pure. These settings are independently store[...]

38 OPERA TING INSTRUCTIONS (continued) SETUP MENU Picture Audio Tim er Function Setup L anguage Select OK Set Setup System System 1 Colour System V ideo Input Audio Input Scart Output M onitor RGB1 D V I-STB RGB2 Component HDT V Select Set Return OK Setup System System 1 Colour System V ideo Input Audio Input Scart Output M onitor RGB1 D V I-STB RG[...]

39 ENGLISH Selected characters Setup hint Audio Input AV1 Stereo L/Mono This should correspond to the audio signal from the equipment that is connected to AV1 audio input terminal. If it is monaural audio, set this to L/Mono. AV2 (Same to AV1) AV3 AV4 Scart Output Not Available (grayed out) RGB1 DVI-PC DVI-STB This should correspond to the signal m[...]

40 Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. Customer servicing can be hazardous. W ARNING Symptom Point to check See page • The screen becomes dark and the images cannot be seen during VCR special playback (fast forward, rewind). • This sometimes occurs when a c[...]

41 ENGLISH Signal Input 1 2 3 4 S-input connector pin specifications Pin Input signal 1 Y 2 Y-GND 3 C 4 C-GND Frame GND 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 1 1 9 7 5 31 Scart connector pin specifications Pin Signal Pin Signal 1 AUDIO OUT (RIGHT) 12 Not Used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUDIO OUT (LEFT/MONO) 14 GND 4 AUDIO GND 15 RGB-R / S[...]

42 Recommended Signal List With Digital RGB signal input (RGB1 input) ( : acceptable) No. Signal mode Horizontal frequency (kHz) Dot clock frequency (MHz) Setup Menu Condition Remarks Signal Name Resolution Vertical frequency (Hz) DVI-PC DVI-STB 1 VGA 640 X 400 70.08 31.47 25.18 2 640 X 480 59.94 31.47 25.18 3 W-VGA 864 X 480 60.00 31.02 33.75 4 86[...]

43 ENGLISH Optional T uner Unit Function The optional tuner unit can operate when installed with the optional video unit. Additional functions when the optional tuner unit is installed are as follows: ( ) COMPONENT NAMES Remote contr ol (provided for the optional tuner unit) POWER ON / OFF button PICTURE MODE button SURROUND button Loading Batterie[...]

44 COMPONENT NAMES (continued) Remote contr ol (provided for the optional tuner unit) (continued) Dynamic Natural Movie Music Favourite Speech D / N A / B i + MENU OK FREEZE ZOOM AV 1 RGB1 RGB2 AV 2 AV 3 AV 4 2-4-12 I / II P+ P- + - DV D 12 3 45 6 78 0 9 PICTURE MODE Y ou may recall the picture mode by pressing this button. Each time pr essed, pict[...]

D / N A / B i + MENU OK FREEZE ZOOM AV1 RGB1 RGB2 AV2 AV 3 AV4 2-4-12 I / II P+ P- + - DVD 123 456 78 0 9 45 ENGLISH SUBTITLE button TV button TEXT button COLOUR buttons (RED, GREEN, YELLOW, BLUE) TEXT / TV + TEXT button TV / TEXT button MODE button [Buttons for TELETEXT Mode] PAGE UP / DOWN button REVEAL button HOLD button INDEX button SUB PAGE bu[...]

46 M onitor rear panel Speaker (R) Speaker ( L ) 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 1 1 9 7 5 31 antenna Make sure that the power switch of the monitor is turned off. INST ALLA TION INSTRUCTIONS Connecting Antenna Precautions when connecting the antenna • Please use a coaxial cable which is free from interference to connect the antenna. Avo[...]

47 ENGLISH OPERA TING INSTRUCTIONS D / N A / B i + MENU OK FREEZE ZOOM AV 1 RGB1 RGB2 AV 2 AV 3 AV 4 2-4-12 I / II P+ P- + - DVD 123 456 78 0 9 POWER ON/OFF button • Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control. And the way to return to a TV channel is as follows: • Pressing INPUT SELECT b[...]

48 OPERA TING INSTRUCTIONS (continued) RECALL button MULTI PICTURE button SELECT buttons Activating the Split mode from the TV screen Pressing the MULTI PICTURE button one time will display 2 pictures. • The speaker icon can be shifted left and right by pressing the A/B button; the audio will be output from the side on which the speaker icon is l[...]

49 ENGLISH Input Signal Scr een Display The TV channel status can be displayed on the screen by pressing the RECALL button of the remote control. • The display will go out in approximately 6 seconds. 1 ABCDE - - - - Min. -- -- : -- -- OFF I TV position Name Sound mode Sound system Off-timer On-timer TV 4 Pictures 2 Pictures (Split) M ain Sub Sub [...]

50 OPERA TING INSTRUCTIONS (continued) D / N A / B i + MENU OK FREEZE ZOOM AV 1 RGB1 RGB2 AV 2 AV 3 AV 4 2-4-12 I / II P+ P- + - DVD 123 456 78 0 9 When the FREEZE button on the remote control is pressed, the screen transfers into the freeze mode. • There are two types of freezing screen mode, Split and Strobe. These are possible to select at the[...]

51 ENGLISH SETUP MENU Picture Audio Tim er Function Setup L anguage Select OK Set Setup Auto Tuning M anual Tuning Fine T uning Sort Auto Off Off Select Set Return OK OK MENU Setup Auto Tuning Country Austria Belgium Croatia Czech Republic Denmark Finland France Germany Search Select Set Return OK Setup Auto Tuning Country Greece Hungary Iceland Ir[...]

52 OPERA TING INSTRUCTIONS (continued) SETUP MENU (continued) [During VIDEO signal input] 1 item is added to the Menu shown in the page . 39 Selected characters Setup hint Scart Output TV Monitor TV:AV4 (Scart) output will be fixed as TV signal output. Monitor:AV4 (Scart) output can view the image as on the main unit. But it is possible to monitor [...]

53 ENGLISH OTHER FUNCTIONS A2 / NICAM / Sound Multiplex • The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect. BILINGUAL / DUAL sound broadcast When bilingual program is received, sound mode display appears in yellow as shown on right. Press the CH I / II button to select t[...]

54 OPERA TING INSTRUCTIONS (continued) DVD Player Selection • You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control simultaneously. Example To operate HITACHI DVD player, press and hold the RECALL button, followed by the button. 1 NOTE • Not all models of the listed b[...]

55 ENGLISH Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. Customer servicing can be hazardous. W ARNING TROUBLESHOOTING Symptoms That Seemingly Appear to be Failur es Symptom Possible reason Remedy (1) Connection of antenna cable to the TV is poor. (2) Corroded or poor an[...]

56 This table shows the specifications when the optional video unit and tuner unit have been inserted. PRODUCT SPECIFICA TIONS • The monitor takes at least 30 minutes to attain the status of optimal picture quality. Panel Display dimensions Approx. 32 inches (716 (H) x 399 (V) mm, diagonal 820mm) Approx. 42 inches (922 (H) x 522 (V) mm, diagonal [...]

Hitachi Plasma TV Horizontal W all-mount Unit Model PWT001 Installation Instructions Thank you for purchasing the Hitachi Plasma TV Wall-mount Unit. To ensure correct usage, please read this instruction manual thoroughly. After reading, please store this manual in a safe place for future reference. This plasma TV wall-mount unit is for use with the[...]

– 2 – Usage cautions to ensure correct usage ● The following symbols are used to ensure safe usage of the product, to prevent danger to yourself and other parties and to prevent damage to property. Symbols ■ This symbol indicates that incorrect handling due to ignoring this symbol can result in the possibility of personal injury or even dea[...]

– 3 – ■ The wall where the wall-mount unit is to be installed m ust be capable of long-term support of the total load of the plasma TV and wall-mount unit. Measures should also be taken to ensure sufficient strength to withstand the f orce of earthquakes, vibration and other external f orces. Incorrect installation can cause the plasma TV to [...]

– 4 – Installing CA UTION ■ Do not install in locations where there is excessive vibration or impact. Injury and damage could result from falling. W ARNING ■ Do not install where there is direct sunlight and other strong light. Strong light could result in eye fatigue during usage. ■ Use the specified bolts and screws in the specified pla[...]

– 5 – Mounting the wall-mount unit on the wall 1. Prepare at least four sets of commercially available anchors and screws, etc., for various types of walls. 2. Carefully read the safety cautions concerning installation locations as described in this instruction manual and then select a suitable location for installation. 3. The relationship bet[...]

4. Fasten the wall-mount unit securely to the wall. ● Clamp to two or more of the long slotted holes in the upper and lower parts of each wall-mounting metal in a well-balanced manner. 5. Dressing the cables ● When passing the plasma TV power cord and signal cables behind the plasma TV, use wire clamps, etc., to prevent cable damage. Mount on a[...]

– 7 – CL42-PD2100 CL37-PD2100 TV-mount metal ① Fasten the bracket (R) , (L) to the TV mount metal with 4 M6 x 18 screws. ➁ Fasten the two TV-mount metals to the back of the plasma TV with 4 M6 x 18 screws. 4 M6 x 18 screws Bracket (R),(L) 4 M6 x 18 screws The 1st TV-mount metal hole Bracket ■ Fasten the two TV-mount metals to the back of [...]

Pr oduct Specifications External Dimensions Mass 2.6kg Main material Steel sheet Surface treatment Black electrodeposited baked paint Angle adjustment Vertical fix Products mounted Hitachi Plasma TV CL32-PD2100 , CL37-PD2100 , CL42-PD2100 Model A B CL32-PD2100 377 113 CL37-PD2100 414 100 CL42-PD2100 414 51 Dimension (A),(B)[...]

ENGLISH Thank Y ou for purchasing this Hitachi T elevision. In the unlikely event that this product should develop a fault, we undertake to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that ... 1. the product has been installed and used only in accordance with [...]

Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105 - 8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham R oad Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer - service@hita[...]