Honeywell HJC5000 manual

Document 800-07422 – Rev A – 08/10 Installation and User Guide UltraKey Lite Keyboard controller for VideoBloX and MAXPRO-Net Matrix Systems HJC5000[...]

[...]

Installation and User Guide[...]

Revisions Issue Date Revisions 800-03854 rev A 02/2009 New document. 800-03854 rev B 03/2009 Updated the MaxPRO map code. 800-03854 rev C 04/2009 Corrected the controller login PIN code; corrected IP address p. 59; updated images for quality 800-07422 rev A 08/2010 Revisions to Step 3: Configure Address, Baud Rate or IP for VideoBloX Mode ; Step 4:[...]

Document 800-07422 Rev A 5 08/10 Explanation of Symbols FCC Compliance Statement Information to the User : This equipment has been test ed and found to comply with the limits for a Class B digital device. Pursuant to Part 15 of the FCC Rules, these limi ts are designed to provide reasonable protection against harmful interference in a residential i[...]

6 Canadian Compliance Statement This Class B digital appara tus complies with Canadian I CES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. European Compliance Statement The manufacturer declares that the eq uipment supplied with this guide is compliant with th e essential protection requirements of the EMC [...]

Document 800-07422 Rev A 7 08/10 Important Safety Instructions BEFORE OPERATING OR INSTALLING THE UN IT, READ AND FOLLOW ALL IN STRUCTIONS. AFTER INSTALLATION, retain the safety and op erating instructions for future reference 1. HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructio ns. 2. INSTALLATION • Install in ac[...]

8 10. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or ha ve the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. Warranty and Service Subject to the terms and conditions listed[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 9 08/10 Contents 1 About this Document and t he UltraKey Lite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Document Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Finding More Information . . . . . . .[...]

10[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 11 08/10 Figures Figure 1-1 UltraKey Lite Port Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Figure 1-2 Terminal Box Front and Back Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Figure 2-1 UltraKey Lite Controller [...]

12 Figure 5-2 Change Password Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Figure 5-3 System Configuration LCD Menu Tree - A ll Modes . . . . . . . . . . . . . . . . . . . . . . 70[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 13 08/10 Tables Table 1-1 UltraKey Lite Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Table 1-2 Shipping Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Table 2-1 LCD Menu Navigation Du[...]

14[...]

Document 800-07422 Rev A 15 08/10 1 About this Document and the UltraKey Lite In this section: • Document Overview , page 15 • Finding More Information , page 16 • Typographical Conventions , page 16 • UltraKey Lite Specifications , page 17 • Shipping Checklist , page 18 • UltraKey Lite Port Connections and Descriptions , page 19 The Ul[...]

16 About this Document and the UltraKey Lite Finding More Information Refer to the online literature library to access other electronic documents in PDF format including data sheets, quick references, inst allation and user guides, specifications, software and product notices: http://www.honeywellvideo.c om . Also see the back cover for internation[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 17 08/10 UltraKey Lite Specifications Table 1-1 UltraKey Lite Specifications Parameter Value Power Requirements 10.8 to 13.2 VDC @ 1 A mpere (A) or POE (48 VDC, Class 3) Connector Types 1×Ethernet (10Base-T, 100Base-TX) RJ45 with LED 1×RS232/422/485 RJ45 with LED LCD [...]

18 About this Document and the UltraKey Lite Shipping Checklist The following is included with you r UltraKey Lite Controller shipment. Use of accessories is dependent on the type of installation. Ultrakey Lite can be connected to the matri x system either by serial port or Ethernet RJ45 connections. Table 1-2 Shipping Checklist Quantity Part Use w[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 19 08/10 UltraKey Lite Port Connections and Descriptions Figure 1-1 UltraKey Lite Port Conn ections DC Power Port Supports 12V (±10%) DC /1 A power inpu t. Use the power adapter included with the shipment and insert one of the four adapte rs based on your local power r[...]

20 About this Document and the UltraKey Lite RS232, RS422/485 Serial Port Note These ports are used to connect to MAXPRO-Net RS232 or RS422 and to VideoBloX NetCPU, Standard CPU and Lite CPU RS422. An isolated surge protection is s uggested when using RS485/RS422 and when cabling between buildings. Note For MAXPRO net installations, COM1 (RS422) an[...]

Document 800-07422 Rev A 21 08/10 2 Using the UltraKey Lite Controller You may need to learn how to use the UltraKey Lite both before and after you begin configu ring. In this s ection: • Logging Onto the Controller , page 21 • Using the UltraKey Lite to Navigat e the LCD Menus , page 22 • VideoBloX Key Functions , page 24 • MAXPRO Key Func[...]

22 Using the UltraKey Lite Controller Using the UltraKey Lite to Navigate the LCD Menus There are a variety of ways to navigate both the LCD menus during configu ration and set up as well as duri ng norm al oper ation with your matrix system. Figure 2- 1 shows all of the keys and other elements of th e UltraKey Lite controller. See Table 2-2 for Ul[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 23 08/10 Figure 2-2 The UltraKey Navigation Controls Touch pad - Use like a laptop mouse pad Right arrow key Left arrow key Backward or reverse key (or down) Forward key (or up) Right arrow key Left arrow key Up arrow key Down arrow key Touch Pad and Ring LCD Keys Joyst[...]

24 Using the UltraKey Lite Controller VideoBloX Key Functions Note Use Figure 2-1 to locate each key as labeled in the ID column. Note The keyboard supports dynamic key config uration. The key functions listed in Table 2-2 are all default functions. Contact Honeywell Technical Support or refer to the applicable VideoBloX manual. To move back throug[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 25 08/10 7 Pause Play Rev Selects previous camera Prev Stop 8 Review Puts keyboard in Device mode NA Pause 9 Record Store a preset (preshot) Store Rec 10 Search Puts keyboard in Device mode NA Index - 11 Pause Play Fwd S elects next camera Next Play 12 Tour Tour 1 Runs [...]

26 Using the UltraKey Lite Controller 28 Mon A Depends on controller address. EG, Add 1 SEQ201 run, Add 2, SEQ202 run, and so on. NA NA 29 Login Login/Logout of CPU Login Login 30 F1 F1: Define in CFG software P P 30 F2 F2: Define in CFG software BJ BJ 30 F3 F3: Define in CFG software AR AR 30 F4 F4: Define in CFG software PB PB 30 F5 F5: Define in[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 27 08/10 MAXPRO Key Functions Note Use Figure 2-1 to locate each key as labeled in the ID column. Table 2-3 MAXPRO Key Functions ID Key Descript ion Key Code Defau lt MAX Function UltraKey 2 Alarm 4 Alarm Clear Halt 3 Seq 8 Scan Select Group 2 4 Iris + 90 Iris Open Iris[...]

28 Using the UltraKey Lite Controller 18 Clear 808 Pause 808 19 Monitor 61 Moni tor Monitor 20 Camera 73 Camera Camera 21 Alt 10 Alt Group 4 22 PTZ Call 94 Light PTZ Call 23 Touch wheel right 105 (1-8) None Shuttle R 23 Touch wheel left 10 6 (1-8) None Shuttle L 23 Touch ring Up 65 Up Arrow Up Arrow 23 Touch ring Down 69 Down Arrow Down Arrow 23 To[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 29 08/10 21+30 F10+F5 18 Pau se Group 6 21+30 F10+F6 53 None Print Select 21+30 F10+F7 101 Scroll Down Scroll Down 21+30 F10+F8 54 F6 Freeze 21+30 F10+F9 28 Sca n Halt Group 10 24/26 Focus + 89 Focus Near Focus + 24/26 Focus - 88 Focus Far Focus - Table 2-3 MAXPRO Key F[...]

30 Using the UltraKey Lite Controller[...]

Document 800-07422 Rev A 31 08/10 3 Installing UltraKey Lite with VideoBloX In this section: • Navigating the LCD Configur ation Menus , page 31 • Installing and Configuring a Serial Connection , page 32 • Installing and Con figuring an Ethernet Connection , page 36 • (Optional) Configuring UltraK ey Lite Using the Web Browser , page 41 Not[...]

32 Installing UltraKey Lite with VideoBloX Figure 3-1 LCD and LCD Navigation Keys Figure 3-2 Video BloX LCD Configuratio n Menu Tree Installing and Configuring a Serial Connection Step 1: Connect to the UltraKey Lite Using th e Serial Port Note Use only COM1 when in VideoBloX mode. See Table 3-1 below. Right arrow key Left arrow key Up arrow key Do[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 33 08/10 Note For a list of accessories see Shipping Checklist on page 18 and for port connections see UltraKey Lite Port Co nnections and Descriptions on page 19 . 1. Select the applicable adapter plug and insert it into the AC adapter. Push to click it into place. See[...]

34 Installing UltraKey Lite with VideoBloX Figure 3-4 RJ45 to DB9 Male Adapter for VideoBloX and VideoBloX Lite CPUs Figure 3-5 Direct RJ45 Se rial Port Connection for VideoBloX NetC PUs Figure 3-6 VideoBloX Seri al Po rt RS422 Connection Example Step 2: Config ure the Controller for Vid eoBloX Mode Note The controller factory defaults are VideoBlo[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 35 08/10 1. If not already done, install and connect the controller to a power source. 2. From the home screen, press Alt > Clr to enter the System Configuration: System Set menu. 3. Enter the PIN password 3434 . The System Set: Mode screen displays. 4. Press the LCD[...]

36 Installing UltraKey Lite with VideoBloX Note In this field, you are setting the VideoBloX NetCPU IP address. To set the UltraKey Lite IP address or enter the main configuration menus, press Alt > Clr and see Step 3: Set and Configure f o r an Ethernet Connection on page 38 . 16. Use the numeric keypad to ente r an IP address as required, then[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 37 08/10 1. Select the applicable adapter plug and insert it into the AC adapter. Push to click it into place. See Figure 3-3 . 2. Plug the AC adapter into the controller power port and the adapter into a power source. 3. Plug an RJ45 network cable from the network to t[...]

38 Installing UltraKey Lite with VideoBloX Step 3: Set and Configure for an Ethern et Connection 1. Press Alt > Cl r . If prompted, enter the password 3434 to enter the Syst em Set top menu. 2. Press the LCD down arrow to scroll to the System Set: Config menu. 3. Press the right arrow key to enter the Configuration menus. 4. Press the LCD up/dow[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 39 08/10 5. Press the LCD up/down arrow keys to scroll through the options (serial port, network, language, back light, slider update, ca scade linkage, hardware test, about). 6. Scroll to the Configuration: Ne twork menu, then press Ent . 7. There are three sub-menus i[...]

40 Installing UltraKey Lite with VideoBloX 2. When you are at the Network: Manual Setting menu, press Ent , then press the LCD up/down arrow keys to set the UltraKeyLite ne twork parameters (IP address, gateway, netmask and DNS). 3. Press the LCD up/down arrow keys to scroll through the menu options to select IP Address , then press Ent to select. [...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 41 08/10 Step 5: Setting the Keyboard Address While Powering Up While powering up, when the Time Left 3 menu displays, press certain keys (see Table 3-3 ) to set the keyboard address. (Optional) Configuring UltraKey Lite Using the Web Browser Logging into the Web Browse[...]

42 Installing UltraKey Lite with VideoBloX Figure 3-8 UltraKey Lite Log in Page Step 1: Configure UltraKey Lite to VideoBloX Mode 1. Log into the web browser. 2. From the top menu, click the Configur ation tab. See Figu re 3-9 . 3. From the side menu, click the System Configur ations tab. 4. From the System Mode drop down list, select VideoBlox . 5[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 43 08/10 Note By default, addresses 1 – 5 in the VideoBloX NetCPU are set for serial connection. Please change this in the NetCPU configuration if you want to use addresses 1 – 5 for Ethernet connection. 3. Under VB Device Network Setting, enter the IP ad dress and [...]

44 Installing UltraKey Lite with VideoBloX 2. Under Serial Port1 Settings , select the following from each drop-down list as required: • Baud Rate : 1200, 9 600, 19200 or 57600 bps. The default for VideoBloX is 19200. • Parity : none • Stop Bits : 1 bit • Data Bits : 8 bits • Serial Mode : RS422 3. Click Apply to save the configuration, C[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 45 08/10 Step 4: Configur ing the Dynamic Keys You can configure the hard keys on the web server. 1. From the side menu, click DynKey Conf iguration . Figure 3-13 DynKey Configuration Tab 2. In the drop-down menu, select the key you want to configure. 3. In the right co[...]

46 Installing UltraKey Lite with VideoBloX[...]

Document 800-07422 Rev A 47 08/10 4 Installing UltraKey Lite with MAXPRO-Net In this section: • Navigating the LCD Configur ation Menus , page 47 • Installing and Configuring a Serial Connection , page 49 • Installing and Con figuring an Ethernet Connection , page 56 • (Optional) Configuring UltraK ey Lite Using the Web Browser , page 60 No[...]

48 Installing UltraKey Lite with MAXPRO-Net Figure 4-1 LCD and Navigation Keys Figure 4-2 MAXPRO LCD Menu Tree From the MAXPRO settings menu, you set the following based on either a Serial or Ethernet connection: • Keyboard ID (address) - Serial or Ethernet connections • Baud rate - Serial connections only • Joystick speed - Serial or Etherne[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 49 08/10 Installing and Configuring a Serial Connection Step 1: Connect to the Ul traKey Lite Serial Port Note For a list of accessories see Shipping Checklist on page 18 and for port connections see UltraKey Lite Port Co nnections and Descriptions on page 19 . Note COM[...]

50 Installing UltraKey Lite with MAXPRO-Net Figure 4-3 RS232 Serial Port Connection Figure 4-4 RS232 Serial Port Connection and MegaPIT MAXPRO Serial Port (RS232) RJ45 to DB9 female #2( RX ) #5( GN D ) #3( T X ) DB 9 (M ax p ro ) #6( T X ) #5( GN D ) #4( RX ) R J45 ( U l t r ak e y L i t e ) R J45 t o D B9 f e mal e RJ45 to DB9 female RJ45 define: [...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 51 08/10 Figure 4-5 RS232 Serial Po rt Connection and MX18 RS232 Connections wi th an RJ45 to DB9 Female Adapter 1. Select the applicable adapter plug and insert it into the AC adapter. Push to click it into place. See Figure 4-6 . Figure 4-6 AC Power Adapter with CEE 7[...]

52 Installing UltraKey Lite with MAXPRO-Net RS422 Connections Us ing a Converter and the Terminal Box 1. Select the applicable adapter plug and insert it into the AC adapter. Push to click it into place. See Figure 4-6 . 2. Connect an RJ45 network cable from the RJ45 port on the terminal box to the controller serial port. 3. Connect an RS422 cable [...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 53 08/10 Figure 4-9 RS232 Serial Port Conn ection and Terminal Box RS422 Figure 4-10 RS232 Serial Port Connection, MX18 and the Terminal Box RS422 RS232 to RS422 RS232 to RS422 2 3 2 S R 2 3 2 S R RS422 PL2 RJ45 PL1 DB9 male PL1 1--RS48 5_1+/RS422_1_TX + 2--RS485_1 -/RS[...]

54 Installing UltraKey Lite with MAXPRO-Net Step 2: Config ure the Controller for MAXP RO Mode Note The controller factory defaults to Vide oBloX mode, Address 1, baud rate 19200 bps. 1. If not already done, install and connect the controller to a power source. The UltraKey Lite LCD displays. 2. From the home screen, press Alt > Clr to enter the[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 55 08/10 Note If the controller cannot connect t o the MAXPRO network, then this step cannot be completed until the connection is established. However, the MAXPRO settings menu can be configured even if the controller has not connected to the MAXPRO network; that is, th[...]

56 Installing UltraKey Lite with MAXPRO-Net Baud Rate: 19.2 KB Data Bit: 7 Parity: Even Stop Bit: 1 Installing and Configuring an Ethernet Connection Step 1: Connect to the Ultr aKey Lite Ethernet Port 1. Plug an RJ45 network cable from the network to the controller Ethernet port. Up to 99 controllers can be connected to the network. See Figure 4-1[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 57 08/10 Step 2: Config ure the Controller for MAXPRO Mode Note The controller factory defaults to Vide oBloX mode, Address 1, baud rate 19200 bps. Follow the same steps as with the serial conn ection, Step 2: Configure the Controller for MAXPRO Mode on page 54 . Step 3[...]

58 Installing UltraKey Lite with MAXPRO-Net Step 4: Config ure the Controller for an Ethern et Connection 1. Press Alt > Cl r to exit from the VideoBloX configuration menu. 2. Press Alt > Cl r a second time to enter the System Set top menu. 3. Press the LCD down arrow key to scroll to the System Set : Config menu. 4. Press the right arrow key[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 59 08/10 When the nework configures successfully, the user can enter the Show Net Infor menu to see the IP Address, IP Address, DNS, Gateway and Netmask. Manually Configuring the Network Manually configuring the network using the Manual Setting menu: 1. Press the LCD do[...]

60 Installing UltraKey Lite with MAXPRO-Net Step 5: Setting the Keyboard Address While Powering Up While powering up, when the Time Left 3 menu displays, press certain keys (see Table 4-4 ) to set the keyboard address. (Optional) Configuring UltraKey Lite Using the Web Browser Logging into the Web Browser 1. If not already done, navigate to, or cop[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 61 08/10 Figure 4-12 UltraKey Lite Login page Step 1: Configure UltraK ey Lite to MAXPRO Mode 1. Log into the web browser. 2. From the top menu, click the Configur ation tab. See Figure 4-13 . 3. From the side menu, click the System Configur ations tab. 4. From the Syst[...]

62 Installing UltraKey Lite with MAXPRO-Net 3. Enter the IP address and Port Number of the MAXPRO-Net server under MAXPRO Device Network Setting . 4. Under Serial Port Setting , select a Baud Rat e from the drop-down list. Options are 9600 or 19200 bps. 5. Select a Connect Mode from the drop-down list. Options are 232 or 422 . 6. From the Joystick [...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 63 08/10 4. Click Apply to save the configuration, Cancel to exit w ithout saving or Default to restore all factory default values. Figure 4-15 Serial Port Configuration Tab Step 3B: Configure the Controlle r for an Ethernet Connection 1. From the side menu, click IP Co[...]

64 Installing UltraKey Lite with MAXPRO-Net Figure 4-17 DynKey Co nfiguration Tab 2. In the drop-down menu, select the key you want to configure. 3. In the right column, select the function you want to add to the hard key, th en click Add . That selected function appears in the center column. 4. Repeat step 3 to add another function to t he selecte[...]

Document 800-07422 Rev A 65 08/10 5 System Administration and Troubleshooting In this section: • System Administration Us ing the Controller LCD , page 65 • System Administration Using the Web Browser , page 68 System Administration Us ing the Controller LCD To navigate a ll configuration LCD menus, see Figure 5-3 on page 70 . Logging in and Na[...]

66 System Administration and Troubleshooting Adjusting the Back Light 1. Log into the controller. 2. From the System Set: Config menu, press the LCD up/down arrow keys to scroll to Back Light . Press Ent . 3. Use the LCD up and down arrow keys or the rotate the touch pad to adjust the back light intensity. Updating the Touch Pad Firmware Slider fir[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 67 08/10 Testing the Hardware 1. Log into the controller. 2. From the System Set: Config menu, press the LCD up/down arrow keys to scroll to Hardware Test . Press Ent . 3. Press the LCD up/down arrow keys and press Ent to select one or all of the following test options:[...]

68 System Administration and Troubleshooting System Administration Using the Web Browser Logging into the Web Browser 1. If not already done, navigate to, or copy and paste, the applicable IP address into your web browser: • LAN connections: for example, http://192.168.1.9 • Crossover cable connections: for example, http://192.168.1.9 (default)[...]

UltraKey Lite Co ntroller In stallation and User Guide Document 800-07422 Rev A 69 08/10 When the process is complete, the message Upgrade success displays and the system reboots. WARNING! Do not power off the keyboard duri ng upgrading. Serious damage can occur to the firmware , rendering the keyboard inoperable. Figure 5-1 Softw are Upgrad e Warn[...]

70 System Administration and Troubleshooting Figure 5-3 Syste m Configuration LCD Menu Tree - All Modes Configuration System Set: Config uration Adjust Bg Light Up/Down Slide English/French Network Language Back Light Show Net Infor Manual Setting DHCP Hardware Test Joystick Slider Serial Port VB Settings Slider Update Restore Defaults Maxpro Setti[...]

[...]

Honeywell Systems Group (He ad Office) 2700 Blankenbaker Pkwy, Suite 1 50 Louisville, KY 40299, USA www.honeywellvideo.com  +1.800.796.2288 Honeywell Systems Group Eu rope/South Africa Aston Fields Road, Whitehouse Industrial Estate Runcorn, Cheshire, WA7 3DL, UK www.honeywell.com/security/uk  +44.01928.754028 Honeywell Systems Group Car ibbe[...]