Go to page of
Similar user manuals
-
Printer
HP (Hewlett-Packard) MFP M175
236 pages 11.56 mb -
Printer
HP (Hewlett-Packard) 1022
2 pages 0.33 mb -
Printer
HP (Hewlett-Packard) 240
143 pages 3.55 mb -
Printer
HP (Hewlett-Packard) 5550 series
151 pages 1.25 mb -
Printer
HP (Hewlett-Packard) 5100Le
9 pages 0.05 mb -
Printer
HP (Hewlett-Packard) 7500 Series
11 pages 2.05 mb -
Printer
HP (Hewlett-Packard) officejet 6105
88 pages 1.86 mb -
Printer
HP (Hewlett-Packard) C2001A
453 pages 4.22 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of HP (Hewlett-Packard) LJ 4000, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of HP (Hewlett-Packard) LJ 4000 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of HP (Hewlett-Packard) LJ 4000. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of HP (Hewlett-Packard) LJ 4000 should contain:
- informations concerning technical data of HP (Hewlett-Packard) LJ 4000
- name of the manufacturer and a year of construction of the HP (Hewlett-Packard) LJ 4000 item
- rules of operation, control and maintenance of the HP (Hewlett-Packard) LJ 4000 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of HP (Hewlett-Packard) LJ 4000 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of HP (Hewlett-Packard) LJ 4000, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the HP (Hewlett-Packard) service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of HP (Hewlett-Packard) LJ 4000.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the HP (Hewlett-Packard) LJ 4000 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
hp La serJet f amil y quic k r e fer ence serv ice guide Ma y 2001 edition , v olume III[...]
-
Page 2
[...]
-
Page 3
HP LaserJet F amily Quick Ref e rence Ser vice Guide V olume III[...]
-
Page 4
Hewlett-Packard Co mpany 11311 Chinden Boulevard Boise, Idaho 83714 U.S.A. © Copyright Hewlett-P a ckard Company , 2001 All Right s Reser ved. Reprod uction, adaptati on, or tran slation w ithou t pri or writte n per miss ion is pro hibit ed, except as allowed und er the copyright laws. Publicati on numb er 5961-095 3 First edition, M a y 2001 Wa [...]
-
Page 5
EN Contents 3 Contents 1 Control-panel messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Error listings, descr iptions, and recommended actions 2 Servic e mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 How to gain access to ser vice mode and related functions 3 P ower suppl y . . . . . . [...]
-
Page 6
4 Ordering other manuals EN Or deri ng ot her manu als The HP LaserJet Q uick Ref er ence Ser vice Guide, volume I II, provides suppor t for newer monochrome printers ( see the follo wing page f o r a complete list of support ed printers) . It has been created to help the HP LaserJ et ser vice engineer quickly troubleshoot common printer problems .[...]
-
Page 7
EN Supported products 5 Suppor ted products Note This guide is updated on a regular basis as the ser vice needs change, as new products are int ro duced, and as additional inf or mation becomes av ailable . Reference name used i n this guide Mo de l num b er Max imu m pages per month (printer) Service m anual part numb e r LJ 1200 LJ 1200SE LJ 1200[...]
-
Page 8
6 Supported product s EN[...]
-
Page 9
EN Chapter contents 7 1 Control-panel messages Chapter contents Overview of print er messages ............................................................. 8 LaserJet 1200 Series printer control-panel light messages ................. 9 Fatal error secondary messages ............................................ 12 LaserJet 2200 Series printer contro[...]
-
Page 10
8 Chapter 1 – Control-panel mess ages EN Overview of printer messa g es This chapter provides information about the control-panel lights for the HP LaserJ et 1200 and 2200 Ser ies pr inters. This chapter also lists control-panel messages for these HP LaserJet printers: • LJ 3100 series • LJ 3150 series • LJ 3200 series • LJ 4100 series Al[...]
-
Page 11
EN LaserJet 1200 Series printer control-panel light messages 9 1 LaserJet 12 00 Series printer contr ol-panel light messages Each control-panel light message is listed, along with possib le causes and steps to re solv e identified errors. Figure 1 Control panel location Contr ol-panel lig hts legend Light symbol Meaning of symbol Light of f Light o[...]
-
Page 12
10 Chapter 1 – Control-panel mess ages EN Contr ol-panel lig ht messages Message P ossible causes Solutions The pr inter i s ready to print . No action is need ed. T o pr int a self-test page, press and rele ase the G O button on the control panel. The pr inte r i s r ece iv ing or proce ssing da ta. W a it for the job to print. The pr inter is i[...]
-
Page 13
EN LaserJet 1200 Series printer control-panel light messages 11 1 The pr inter has an er ror. The do or is op en, the media is o ut, the toner car tr idge is installed inco rre ctly , o r t he medi a i s jamm ed. 1. Check that the toner car t r id ge doo r is completely closed. 2. Lo ad media i nto t he correct i nput tray . 3. Check that the toner[...]
-
Page 14
12 Chapter 1 – Control-panel mess ages EN Fa tal error secondary messages If the printer has a fatal error , pres s and hold the G O button to see the secondar y error message. The pr inter has an accessor y err or . All lights are b link ing. 1. Remove the DIMM and reseat it. 2. If the pr inter still has an error, replace th e DIMM . Fata l erro[...]
-
Page 15
EN LaserJet 1200 Series printer control-panel light messages 13 1 Laser/scan ner/be am detect error. 1. Check the ribbon connector a nd four wi re connector a t the t op of the f ormatter PCA. 2. Replac e the la ser/ scanner. 3. Replac e the for matter PCA. Fuser error. The fus er has a malfu nction. 1. Unplug the p rinter a nd do not pl ug it b ac[...]
-
Page 16
14 Chapter 1 – Control-panel mess ages EN Scan buffer error. 1. Unplug the p rinter, remove and reattach the optiona l copier/s cann er, and then p lug the prin ter back in. 2. Replac e the o ptional copier/sc anner. Miscellan eous inte rface error. 1. Unplug the pr inter, remove and reattach the optiona l copier/s cann er, and then p lug the pri[...]
-
Page 17
EN LaserJet 2200 Series printer control-panel light messages 15 1 LaserJet 22 00 Series printer contr ol-panel light messages Figure 2 Control panel lay out Light patterns provide status and error messages. The lights can be in any one of the following states: Figure 3 Light states The follo wing control-panel light patter ns indicate various condi[...]
-
Page 18
16 Chapter 1 – Control-panel mess ages EN Prima r y s tat u s co des Contr ol-pane l lig ht pattern Primary status message Recommended action Star t-up. The Go , Ready , and Attent ion lights cycle one afte r anot her. l No action is need ed. Note Pressing G O or J OB C ANCEL has no effect until the printer is ready . Ready . The Ready li ght is [...]
-
Page 19
EN LaserJet 2200 Series printer control-panel light messages 17 1 Process ing.The printer is rece iving or pr ocessi ng data . l No action is need ed. Note Pressing J OB C ANCE L cancels th e current jo b . One or two pages might pr int a s the pri nter cl ears the pr int job. The pr inter ret urns to the Re ady state after the jo b is canc elled .[...]
-
Page 20
18 Chapter 1 – Control-panel mess ages EN Continuable, fa tal, and a ccessor y errors Additiona l informa tion i n the form of a sec ondar y error messag e is available for each of th e following thre e types of e rrors: • Cont in uable e rror s • Fa t a l e r r o r s • Accessor y errors The firs t entr y in each of the following tables sho[...]
-
Page 21
EN LaserJet 2200 Series printer control-panel light messages 19 1 Contin uable attention er r or secon dary codes Contr ol-pane l lig ht pattern Conti nuable attenti on error secondary message Recommended act ion General continua ble error l V erify th at all of the pow er-sup ply wire harn ess conn ections are conne cted correctl y and full y seat[...]
-
Page 22
20 Chapter 1 – Control-panel mess ages EN T empor ary eng ine error (41.x) Status log cod e: 3003 4 l Press G O . The page contain ing the error will be printed. l If the error persists, reseat the connec tions to the laser/scann er , formatter, and engine control ler . l Replace the laser/ sca nner . l Replace the f ormatter . l Replace the engi[...]
-
Page 23
EN LaserJet 2200 Series printer control-panel light messages 21 1 Buffer flow erro r (22) Status log cod e: 3002 7 l V eri fy that the prin ter cable is connec ted prope rly and ful ly seated at connecti ons. Alwa ys use a hi gh-quali ty cable. Some non - HP cables mi ght be missing p in connec tions or migh t otherw ise n ot conf o rm to IEEE- 128[...]
-
Page 24
22 Chapter 1 – Control-panel mess ages EN NVRAM erro r (68) Status log co de: 300 35 or 30036 l A memo r y erro r resulte d in one or more prin ter settings being rese t to factory de faults. l Print a config uration page and verify tha t the pr inter setting are set co rrectly . l T urn the printe r off . Press an d hold J OB C ANCE L and turn t[...]
-
Page 25
EN LaserJet 2200 Series printer control-panel light messages 23 1 Memory co nfig urat ion error l P erf orm a cold reset. Note If both the Atten tion and Re ady light s com e on before you release G O , then you must repe at the proc edure. l If the error persists, remove or re place DIMM(s ). l Replace the f ormatter . P ersonal ity or job-re late[...]
-
Page 26
24 Chapter 1 – Control-panel mess ages EN EIO po r t error l T urn th e pr inter off and resea t the EIO accessor y . T ur n the prin ter on. l Replace the f ormatter . DIMM slot 1 incompatible error l T ur n the printer of f. Reseat DIMM 1. T urn the printe r on. l If the pro blem persists, re place DIMM 1. l Replace the f ormatter . Contin uabl[...]
-
Page 27
EN LaserJet 2200 Series printer control-panel light messages 25 1 DIMM slot 2 incompatible error l T ur n the printer of f. Reseat DIMM 2. T urn the printe r on. l If the pro blem persists, re place DIMM 2. l Replace the f ormatter . Fata l error co des Contr ol-pane l lig ht pattern Fatal err or message Recommended act ion The pr inte r has experi[...]
-
Page 28
26 Chapter 1 – Control-panel mess ages EN Fata l error se condary cod es Contr ol-pane l lig ht pattern Fatal er ror secondary message Recommended act ion Gen eral fatal error (79) l T ur n the p ower off and back o n. l If the error persists, turn off the power . Remov e all accessor ies (for ex a m p le , D I M M , EIO card ). T ur n on the pr [...]
-
Page 29
EN LaserJet 2200 Series printer control-panel light messages 27 1 Scann er error (52 ) Status log cod e: 4005 2 l Press G O . The page contain ing the error will automatically be repri nted. l T ur n the p rint er off and resea t the la ser/ scanner ca bles. l Replace the laser/ sca nner . Bad b eam detec t error (51) Status log cod e: 4005 1 l Pre[...]
-
Page 30
28 Chapter 1 – Control-panel mess ages EN Bad fu ser error (50) Status log cod e: 4005 0 l Be sure that the fuser is installed correctl y and that it is fully seated. l Reseat the fuser cables. l Replace the fuser. l Replace the engine controller assem bly . l Replace the power supply . F orma tter int erna l RAM or ROM e rror l T urn the printe [...]
-
Page 31
EN LaserJet 2200 Series printer control-panel light messages 29 1 NVRAM erro r (68) l T urn the printe r off , and then t ur n it back on. l Replace the f ormatter . Scan buffer err or (64 ) Status log cod e: 4006 4 l T urn the printe r off , and then t ur n it back on. l If the message persists, re place th e f ormatter . RAM con trol ler e rror ([...]
-
Page 32
30 Chapter 1 – Control-panel mess ages EN Misc ellan eous in terf ace hard ware err or (67 ) Status log cod e: 4006 7 l Check the I/O connec tions. l V eri fy that the cable is IEEE-1284 compliant (if applicable ). Acces sory err or cod es Contr ol-pane l lig ht pattern s Accessory error message R ecommended act ion An er ror has oc curred with e[...]
-
Page 33
EN LaserJet 2200 Series printer control-panel light messages 31 1 Acces sory err or s secondary codes Contr ol-pane l lig ht pattern s Accessory secondary error message Recommended act ion EIO po r t error l T urn th e pr inter off and resea t the EIO accessor y . T ur n the prin ter on. l Replace the f ormatter . DIMM slot 1 incompatible error l T[...]
-
Page 34
32 Chapter 1 – Control-panel mess ages EN DIMM slot 2 incompatible error l T ur n the printer of f. Reseat DIMM in slo t 2. T u rn th e pr inter on. l If the pro blem persists, re place th e DIMM in slot 2. l Replace the f ormatter . Acces sory erro rs secondary codes (contin ued) Contr ol-pane l lig ht pattern s Accessory secondary error message[...]
-
Page 35
EN Alphabetical messages 33 1 Alphabetical m essages The f ollowing control-panel messages are f or the LJ 3100, LJ 3150, LJ 3200, and LJ 4100 Series printers. Numerical messages begin on page 67. Enter a different one-touch button or an unass igned speed-dial code. Ask the network administrator to unlock t he function. While programming a group-di[...]
-
Page 36
34 Chapter 1 – Control-panel mess ages EN 1 Remov e and reinstall the en velope f eeder. 2 T urn the printer off and then back on. 3 Replace the env elope feeder . 1 Reinstall the optional t ra y . 2 T urn the printer off and then back on. 3 Make sure that the optional tra y i s connected and that the connector is not damaged. 4 Replace the optio[...]
-
Page 37
EN Alphabetical messages 35 1 B ACKSPACE was pressed while in a group-dial code in the Group Dial Setup lev el of the menu. 1 Press S TART to retur n to the group-dial code and continue editing. 2 Press E NTE R /M ENU to go to the Group Dial Setup lev el of the menu. (Press E NTER /M ENU again to choose a diff erent group-dial code.) 3 Press S TOP [...]
-
Page 38
36 Chapter 1 – Control-panel mess ages EN S TOP /C LEAR was pressed to cancel the current job while pages were f eeding from the document feeder . T he cancel process will not automatically clear the doc ument feeder . 1 Pull the document-release door open, remove the jammed item, and close the door . 2 Clear the items in the document-f eeder tra[...]
-
Page 39
EN Alphabetical messages 37 1 The engine is checking for possible jams or print m edia that was not cleared from the printer . W ait f or the printer to finish checking (up to 30 seconds). 1 Check to see if the document is jammed or if m ultiple sheets of the document were loaded. 2 Check the special- media lev er. It should be to the left f or reg[...]
-
Page 40
38 Chapter 1 – Control-panel mess ages EN An error was detected in the static r andom-access mem o r y (SRAM ). 1 Unplug the power cord from the power source, wait 10 seconds, and then reconnect the power cord. 2 If the error persists, replace the formatter. 1 In Ser vice mode, r un the S RAM stuck address t est. 2 Unplug the power cord from the [...]
-
Page 41
EN Alphabetical messages 39 1 1 Unplug the power cord from the power source, wait 10 seconds, and then reconnect the power cord. 2 If the error persists, replace the formatter. 1 Reseat the EIO disk. 2 Replace the old disk de vi ce with a new disk. 1 Check the f ilename and directory nam e. 2 Reseat the EIO disk. 3 Retr y the operation. 1 Delete al[...]
-
Page 42
40 Chapter 1 – Control-panel mess ages EN 1 Press S TART . A repor t is pr inted. 2 Check the f ax log status column for the “ F ax Document was Los t ” message. 3 Resend the ass ociated outgoing fax es. Ask the sender to resend in c om in g faxe s. 1 Check the duple xer f or a jam. 2 Make sure the right-angle pow er cord is used f or the pri[...]
-
Page 43
EN Alphabetical messages 41 1 1 Reseat the indicated EIO disk [x]. 2 Replace the indicated EI O disk [x]. 1 Unplug the power cord from the power source, wait 10 seconds, and then reconnect the power cord. 2 If the error persists, replace the formatter. 1 Load the requested en velope type and siz e into the env elope f eeder. 2 Make sure that the en[...]
-
Page 44
42 Chapter 1 – Control-panel mess ages EN Choose one of the f ollowing: • Press S ELECT to accept the media t ype, and then press G O . • Press +V ALUE - to change the type , press S ELECT to accept the new type, and then press G O to continue . Resend the fax or ask t he sender to resend the fax to you. 1 T urn power off and then bac k on. 2[...]
-
Page 45
EN Alphabetical messages 43 1 1 Allow the product to r etry s ending the fax. 2 Call the recipient to ensure t hat the f ax machine is on and ready . 3 Check that you are dialing the correct fax number . 4 Check that the Redial on no an swer option is enabled. 5 Unplug the product telephone cord f r om the wall, plug in a telephone, and tr y mak in[...]
-
Page 46
44 Chapter 1 – Control-panel mess ages EN 1 Ask the sender to resend the fax. 2 T ry faxing back t o the sender or to another f ax mac hine. 3 Check that the telephone cord is securely connected by unplugging and reconnecting the cord. 4 Press F AX /S EN D to check for a dial tone on the pho ne line. 5 Make sure the phone line is working. Disconn[...]
-
Page 47
EN Alphabetical messages 45 1 1 Delete unnecessar y files from the flash DIMM, and t hen try again. 2 Use HP Resource Manager to download or delete files and fonts. (See the so ftware Help for more information.). Use the HP Resource Manager software to disable the write protection. T ype one-touch buttons (progr am med as an individual speed-dial) [...]
-
Page 48
46 Chapter 1 – Control-panel mess ages EN The product is r unning an inter nal cleaning cy cle. W ait f or the product to finish the cleaning cycle. The messag e will clear when the cycle is finished. 1st x = Devi ce numb er in chain 2nd x = De vice type (3 types): 1 = Input 2 = Output 3 = Stapler/stac ker unit yy = Device specific error See the [...]
-
Page 49
EN Alphabetical messages 47 1 1 Reinser t the sp ecified tra y . 2 Check f or damaged tabs in the tra y . 3 Check f or damaged switches in the pr inter . 4 Replace the PCA controller in the feeder . Reenter the date and time. 1 Run the keypad test again. 2 If the error persists, try each of the fol lo wing in the order given: • Check the cabling.[...]
-
Page 50
48 Chapter 1 – Control-panel mess ages EN 1 Load the requested m edia into tra y 1. 2 Press G O if the appropriate media is already loaded in tra y 1. 3 Press -V ALUE + to scroll through the a vailable types and siz e s. 4 Press S ELECT to accept the alter nate type or size. 1 Reload the unscanned pages and resend them to finish t he f ax job. 2 [...]
-
Page 51
EN Alphabetical messages 49 1 Add more m emory to the printer , or simplify the print job. 1 Press G O to continue. 2 Add more m emory to the printer , or simplify the print job. 1 Press G O to continue. 2 Add more m emory to the printer , or simplify the print job. 1 Unplug the power cord from the power source, wait 10 seconds, and then reconnect [...]
-
Page 52
50 Chapter 1 – Control-panel mess ages EN 1 Check that the telephone cord is securely connected. 2 Check f or a dial tone. • For LJ 3100 and LJ 3150 models: Press and hold S TOP /C LEAR . • For LJ 3200 models: Press F AX /S END . 3 If necessar y , c heck the wall outlet by plugging in a phone and attempting to place a call. 4 Plug the product[...]
-
Page 53
EN Alphabetical messages 51 1 The product attempted to e x ecute “ Reprint Last F ax ” when not hing was in memor y . Receive a f ax before attempting to use this option. 1 Print all fax es that have been received in memor y . 2 If y ou hav e several f axes set up t o be sent at a future time or to be polled, use job status to clear them. There[...]
-
Page 54
52 Chapter 1 – Control-panel mess ages EN Make sure that the t oner car t r idge is a genuine HP toner cart r idge. A non-HP toner car tridge will produce this error . Note Any printer repair re quired as a result of using non-HP toner is no t cov ered under the printer warranty . • If the HP toner cartr idge is new , the e-label (car tr idge m[...]
-
Page 55
EN Alphabetical messages 53 1 Wa i t fo r a fa x . As soon as a fax is in the memor y , the product will reprint the fax. The printer is offline. Press G O to place the pr inter online. Remov e the sheets from the output bin. 1 Load media. 2 If media is already loaded, remove it. 3 Check f or, remove, and discard any jammed sheets. 4 Reload the med[...]
-
Page 56
54 Chapter 1 – Control-panel mess ages EN Reenter a f our -digit password. 1 Reduce the size of t he print job, or wait f or other jobs to finish so memor y will be freed. 2 If f axes are set up to be poll ed or sent at a future time, y ou might want to cancel these jobs to free memor y . 1 Make sure that the parall el cable is securely connected[...]
-
Page 57
EN Alphabetical messages 55 1 The maximum number of characters that c an be used is 60. If you hav e a number longer than 60 characters, break the number into smaller chunks. 1 T ype the first pa rt of the number, and then p ress R EDIAL /P AU SE as the last character in the first nu mber . 2 T ype the second part of the number as if it were a s ec[...]
-
Page 58
56 Chapter 1 – Control-panel mess ages EN The product has detect ed a power f ail ure and has also detected unsent f ax es . Once the product resends the f axes, the product will return to the Ready state. The DIMM in the indicated slot has failed. T urn off the product and check the indicated DIMM. 1 Check that the parallel cab le is securely co[...]
-
Page 59
EN Alphabetical messages 57 1 There is an error with the print engine . 1 Unplug the pow er cord from the po wer source for 10 seconds, and then reconnect it. 2 T ry connecting the pr oduct to a different power source. 3 Check the cabling to the heating element. 4 If the problem persists, replace the heating elem ent. 5 If the problem persists, rep[...]
-
Page 60
58 Chapter 1 – Control-panel mess ages EN The printer do or is not latched s ecurely . 1 Open and close the printer d oor . 2 Unplug the power cord from the power source, wait 10 seconds, and then reconnect the power cord. 3 If the problem persists, replace th e laser/scanner assem bly . The print engine has failed to pic k up a piec e of media. [...]
-
Page 61
EN Alphabetical messages 59 1 1 Check the f ile name and director y na me. 2 Reseat the RAM disk. 3 Reattempt the oper ation. 1 Delete the unnecessary files, and then try again, or turn the printer off , and then turn the printer on to delete all f iles on the device. (Delete files using H P Resource Manager or another software utility . See the so[...]
-
Page 62
60 Chapter 1 – Control-panel mess ages EN 1 Allow the product to r etry s ending the fax. 2 Call the recipient to ensure t hat the f ax machine is on and ready . 3 Check that you are dialing the correct fax number . 4 Unplug the product telephone cord f r om the wall, plug in a telephone, and then tr y making a call. 5 Plug the product phone cord[...]
-
Page 63
EN Alphabetical messages 61 1 An error has occurred within the SRAM. 1 Press and hold down S TOP /C LE AR f or 7 seconds to reset the product. 2 Check the cab ling connect ions. 3 If the error persists, unplug t he power cord from its power source for 10 seconds, and then reconnect the power cord. 4 T ry connecting the pr oduct to a different power[...]
-
Page 64
62 Chapter 1 – Control-panel mess ages EN Choose a speed-dial code that has already been assigned a fax number . 1 Unplug the power cord from the power source, wait 10 seconds, and then reconnect the power cord. 2 If the message is still displa yed, replace the f or m a tter. The message first appears when about 15 percent of the t oner is remain[...]
-
Page 65
EN Alphabetical messages 63 1 This message occurs if tra y 2, 3, or 4 was reques ted, but the tra y is empty or the tra y adjustments are not set f or the requested media type or size. 1 Ensure that all three paper-size adjustments have been made. 2 Make sure that the media t y pe is set in the control panel. 3 Load the requested m edia into an ind[...]
-
Page 66
64 Chapter 1 – Control-panel mess ages EN 4 T o print on a diff erent media that is already loaded: • Pres s G O to print from the next a v ailab le t ra y . • Pres s -V ALUE + to scroll through t he av a ilable types and sizes . • Pres s S ELECT to accept the alternate type or size . • Inspect the s witches in the tra y . • Remove the [...]
-
Page 67
EN Alphabetical messages 65 1 Memor y or file s ystem failures would not allow the printer to st ore the job . 1 Reseat the RAM DIMMs or the EIO hard disk. 2 Install additional memory or an EIO hard disk. When printing, the incorrect printer dr iver was selected, or an error occurred with the parallel interf ac e. 1 After selecting the Print comman[...]
-
Page 68
66 Chapter 1 – Control-panel mess ages EN 1 Press -V ALUE + to scroll through the a vailable types and siz e s. 2 Press S ELECT to accept the alter nate type or size. The RAM disk setting has been changed from the printer cont rol panel. This change will not take effect until the printer re initializes. T urn th e printer o ff , turn the printer [...]
-
Page 69
EN Numerical mess ages 67 1 Numerical me ssages The product is waiting f or y ou to press a programmed one-touch button or to type a speed-dial code i nto a group-dial code. Begin adding f ax numbers to the g roup-dial code. Press E NTER /M EN U to program t h e one-touch or speed-dial. • If y ou w ant to program a group-dial, press S TOP /C LEAR[...]
-
Page 70
68 Chapter 1 – Control-panel mess ages EN 1 Ensure that the paper tra ys are loaded properly so that media can f eed from the tra ys . • If multiple sheets are feeding, fan the media, and reduce the stack height. • Ensure that the media does not e xceed the maximum length (356 mm/14 inc hes). • Rotate the media in the input tra y by 180 ° [...]
-
Page 71
EN Numerical mess ages 69 1 1 Check the duple xer and the rear area of the printer for obst ruct ions or damage. 2 In the duple xer , check PS701 and PS703 f o r proper operation. 3 Replace the duple x er if a sensor is def ective. 1 Remov e all media in the paper path, and then open and close the top cov er . 2 If the message per sists after all m[...]
-
Page 72
70 Chapter 1 – Control-panel mess ages EN Press G O to print the transf erred data (some data might be lost), and then simplify the print job , or install additional memory . Press G O to print the transf erred data (some data might be lost), and then simplify the print job , or install additional memory . 1 Press G O to clear the error message a[...]
-
Page 73
EN Numerical mess ages 71 1 1 Reload the tra y with the correct media size. 2 Ensure the media in the tray is loaded under the front and bac k tabs. Check sensors PS103 and PS106 f or proper operation. 3 If y ou are tryi ng to print from tra y 1, make sure t hat the paper-size setting in the pr inter control panel is configured corre ctly . 4 If yo[...]
-
Page 74
72 Chapter 1 – Control-panel mess ages EN 1 Press C AN CEL J OB to clear the print job from the pr inter mem ory . 2 T urn th e printer o ff , and then tur n the printer on. 3 T ry pr inting a job from a different software progr a m. If the job pr ints, go bac k to the first program and tr y pr inting a different f ile. (If t he message only appe[...]
-
Page 75
EN Numerical mess ages 73 1 1 Disconnect the power cable from t he product, wait at least 30 seconds, and then reconnect the po wer cable and wait for the product to initialize. 2 Check the cab ling connections to the heating element. 3 Replace the heating element. 4 If the error persists, replace the E CU . X = Description 1 = Low f user temperatu[...]
-
Page 76
74 Chapter 1 – Control-panel mess ages EN 1 Remov e the printer from any UPS supplies, additional power supplies, or power strips. 2 Plug the printer into a w all outlet, and see i f this resolves the problem. 3 If the pr inter is already p lugged into a wall outlet, tr y an other power source in the b uilding that is independent of the one curre[...]
-
Page 77
EN Numerical mess ages 75 1 1 Disconnect the power cable from t he product, wait at least 30 seconds, reconnect the power cable, and then wait for the product to initiali ze. 2 T ry connecting the pr oduct to a different power source or surge protector . 3 If the error persists, replace the contac t image senso r . 4 If the error still persists, re[...]
-
Page 78
76 Chapter 1 – Control-panel mess ages EN The DIMM that caused the error will not be used. X = D IMM t ype 0 = ROM 1 = RAM y = Device location 0 = Inter nal memor y (ROM or RAM) 1 to 4 = D IMM slot 1, 2, 3, or 4 zz = Error number 0 = Unsuppor ted m emor y 1 = Unrecognized memor y 2 = Unsuppor ted m emor y size 3 = F ailed RAM t est 4 = Exceeded m[...]
-
Page 79
EN Numerical mess ages 77 1 1 Disconnect the power cable from t he product, wait at least 30 seconds, reconnect the power cable, and then wait for the product to initiali ze. 2 If the error persists, replace the formatter. 1 Open the top cov er , and remove the toner car tr idge. 2 Pull the sealing tape t ab to remove the strip. 3 Reinstall the ton[...]
-
Page 80
78 Chapter 1 – Control-panel mess ages EN The page containing the err or will automatically be repr inted. 1 Check the po wer . 2 Replace the f or matter and/or firm ware DIMM. 3 Replace the ECU . X = Description 1 = Illegal input or bad accessor y connector 2 = Illegal output The page containing t he error automatically reprints. 1 T urn t he pr[...]
-
Page 81
EN Numerical mess ages 79 1 1 T urn th e printer o ff , and then tur n the printer on. 2 V erify that the environmental thermistor cable is se curely connected. 3 Replace the environmental ther mis tor . 4 If the error persists, replace the E CU . 1 Replace the toner cartr idge. 2 Check the connection f rom the memory controller PCB to the engine c[...]
-
Page 82
80 Chapter 1 – Control-panel mess ages EN 3200 serie s only 1 Disconnect the power cable from t he product, wait at least 30 seconds, reconnect the power cable, and then wait for the product to initiali ze. 2 If the error persists, replace the formatter. 4100 serie s only X = Location of prob l em 0 = Inter nal memor y 1 to 4 = D IMM slot 1, 2, 3[...]
-
Page 83
EN Numerical mess ages 81 1 First X = Device number in chain Second X = Device type (3 types): 1 = Input 2 = Output 3 = Stapler/stac ker unit yy = Device-specific error 1 Press G O to clear the mess age. 2 T urn th e printer o ff and then on. 3 Check and reseat all cables between the print er and the spe cified device . 4 Reseat the e xternal paper[...]
-
Page 84
82 Chapter 1 – Control-panel mess ages EN The printer pe rmanent storage is full. Some settings might have been reset to the f actor y defaults . 1 Print a configuration page, and then check the printer settings to determine which values hav e c hanged. 2 Hold down C ANCE L J OB while tur ning the printer on. This will clean up the NVRAM by remov[...]
-
Page 85
EN Numerical mess ages 83 1 4100 serie s only 1 Press C AN CEL J OB to clear the print job from the pr inter mem ory . 2 T urn th e printer o ff , and then tur n the printer on. 3 T ry pr inting a job from a different software progr a m. If the job pr ints, go bac k to the first program and tr y pr inting a different f ile. (If t he message only ap[...]
-
Page 86
84 Chapter 1 – Control-panel mess ages EN 1 Disconnect the power cable from the product, wait at least 30 seconds, rec onnect the power ca ble, and then wait fo r the product to initiali ze. 2 If the error persists, rep lace the formatter. The EIO access ory in slot [z] has encountered a cr itical error . Z = Description 1 = EIO slot 1 -The pr in[...]
-
Page 87
EN Chapter contents 85 2 Ser vice mode Chapter contents Service mode overview . ....................................... ............. .... ...... ....... 87 LJ 1200 Service mode funct ions ....................................... .... .... ......... 88 Initializing NVRAM and using cold reset ................................. 88 PJL software com mand[...]
-
Page 88
86 Chapter 2 – Service mode EN LJ 3200 Service mode funct ions....................................................... 110 Secondary S ervice menu ........................ ...... ............... .... ..... 110 Developer ’ s menu ...... ........ .. ......... .. ........ .. ......... .. ........ .. ....... 111 Diagnostic mode . ...................[...]
-
Page 89
EN Service m ode overview 87 2 Service mode ov er view Serv ice mode allows service pers onnel to v er ify and manipulate internal printer settings and to access the diagnostic f eature . Service mode should be used only by authorized ser vice personnel. Y ou can perf orm the followi ng tasks while in Ser vice mode: • Print a Ser vice mode self-t[...]
-
Page 90
88 Chapter 2 – Service mode EN LJ 1200 Service mode functions Init ial iz ing NVR AM a nd us ing co ld res et The NVRAM initialization sets all def ault variables stored in NVRAM back to the f act ory default values or to a def ault ROM value , depending on the variable. It also performs a sys tem reset. The NVRAM initialization resets the follo [...]
-
Page 91
EN LJ 1200 Service mode functions 89 2 PJL software c ommands T o set the f ollo wing NV RAM variables: F actor y printer DEF AUL T P APER and copier/scanner f act or y default paper size are set to the same v alue automatically . F ac tory pr inter D EF AUL T LP ARM: PCL SYMS ET F actory DEF A UL T OEM bit F actory DEF A UL T PRINTP AGECOUNT F act[...]
-
Page 92
90 Chapter 2 – Service mode EN The table below provides a more detailed descr iption of the NVRAM PJL factory variables and commands and shows possible settings for each. NVRAM PJL factory variab les NVRAM PJL variable or command P ossible settings DEF A UL T P APE R “ Letter ” , “ Legal ” , “ A4 ” , “ Executiv e ” , “ Com10 ”[...]
-
Page 93
EN LJ 1200 Service mode functions 91 2 NVRAM PJL fact or y variable s T o use the following commands, you need some method t o send PJL commands to the pr inter , either with a software tool or by copying a binary file that contains the commands from the host using an MS-DOS ® box. F or ex ample, from the MS-DOS prompt: copy /b filename lpt1 Here [...]
-
Page 94
92 Chapter 2 – Service mode EN LJ 2200 Service mode functions In Ser vice mode, the following can be performed: • Print a Ser vice mode self-test. • V erify and set the p age count. • Set the cold res et def ault. • Set the demo page = tru e/f al s e. • Set the diagnostic functions on or off . Entering Service mode Use PJL commands to e[...]
-
Page 95
EN LJ 2200 Service mode functions 93 2 Ente ring escape c haracter s Printer comm ands always begin wi th the escape character (ESC ). The f ollowing table shows how the escape character c an be entered from v arious MS-DOS programs. The fol lowing table shows ho w to use PJL commands to enter Serv ice mode and perf orm various Ser vice mode config[...]
-
Page 96
94 Chapter 2 – Service mode EN Setting the pag e count The page count is stored in the printer ’ s NVRAM. If it i s necessary to replace the f or matter PCB, the page count should be reset t o the printer ’ s original page count to reflect the age of the print engine. Before removing the old formatter PCB, print a self-test/conf iguration pag[...]
-
Page 97
EN LJ 2200 Service mode functions 95 2 Setting the cold-reset default The customization variab le will deter m ine the default paper size after a cold re set. This is set to A 4/l ette r a t th e m anufactu rer. This vari able might need to be reset when the formatter is replaced. PJL command Description E C %-12345X @PJL Star t PJL job @PJL SET SE[...]
-
Page 98
96 Chapter 2 – Service mode EN Resetting the print er Cold reset /EIO card rese t Note This feature sets all system parameters to the factory defaults. T o perform a co ld reset: 1 T urn the printer o ff. 2 Press and hold G O . 3 T urn the printer back on, and cont inue to hold G O until the Attention light turns on. 4 Release G O . The device li[...]
-
Page 99
EN LJ 3100/3150 Service mode functions 97 2 LJ 3100/3150 Service mode functions Control-panel Ser vice menu Use the control-panel menu, under SER VICE , to set up remote servicing and to recalibrate the document scanner . The ser vice por tion of the control panel menu is sho w n below in a hierarchical diagram: Contr ol panel s er vice men u T est[...]
-
Page 100
98 Chapter 2 – Service mode EN Extended Service menu Use the Extended Ser vice mode to run v arious self-tests and to change softs witch settings, such as the country code softswitch setting. T o gain access t o the Ext ended Ser vice menu 1 Press B ACKS PACE #** . 2 Use < and > to select the choices giv en in the Extend ed Servi ce menu (s[...]
-
Page 101
EN LJ 3100/3150 Service mode functions 99 2 Exte nded Ser vice me nu tr ee The fol lowing shows the la y out of the Extended Ser vice menu settings in a hierarchical diagram. Repor ts Help T .30 protocol trace SRAM d ump Scanner plots Log debug repor t T ask stac ks T ranslations Printe r f onts Help prints a menu rep or t for the product. Memory/s[...]
-
Page 102
100 Chapter 2 – Service mode EN Self-tes t in Ex tended Ser v ice mode If you perform a self-test from the Ex tende d Serv ice menu, the printed repor t will also sho w the firmware revision n umber and details. Note Print the inter nal repor ts before perf or ming Ext ended Ser vice mode tests. The reports contain a record of all settings and ca[...]
-
Page 103
EN LJ 3100/3150 Service mode functions 101 2 Modem 1 dial tone detect 1 Make sure that t he telephone cable is plugged into the correct connector on the product and that the telephone line is operational (use a telephone to test the line). 2 If the test f ails again, check the configuration settings in t he control panel. 3 If the test f ails again[...]
-
Page 104
102 Chapter 2 – Service mode EN Other tests in Extended Service mode The follo wing char t shows test s that can be performed in Extended Serv ice mode and provides a brief e x planation of each test: Extended Se r vice mode tests T est Explanation K eypad test T ests that all b uttons are functioning (by pressing the buttons in sequence) . LCD t[...]
-
Page 105
EN LJ 3100/3150 Service mode functions 103 2 Repor ts in Extended Service mode The follo wing char t shows repor ts that can be pr inted from Extended Serv ice mode and provides a brief e x planation of each repor t. Extended Se r vice mode reports Report Exp lanation T .30 protocol trace Prints a repor t of the G3 protocol transmissions and recept[...]
-
Page 106
104 Chapter 2 – Service mode EN Clear memory in Extended Service mode CA UTION Clearing memor y clears all parameters, which can render the product illegal or inoperab le. Print the internal repor ts before clearing memor y in Extended Serv ice mode. The reports contain a record of all settings and can assist you in res toring the produc t to its[...]
-
Page 107
EN LJ 3100/3150 Service mode functions 105 2 Softswitches Any time the RFI s hield is removed from the printe r , or whe n softs witches are reset to defaults, the country code s ofts wit ch must be reset. Extended Ser vice mode allows you to change softswitches on the printer . A softswitch is a set of one t o eight bits (a sequence of eight 1 ’[...]
-
Page 108
106 Chapter 2 – Service mode EN 9 Press E NTER /M EN U to complete the softs witch change. 10 Press S TOP /C LEAR . 11 Enter B ACKS PACE #** to exit th e Extende d Servi ce menu. Note If y ou do not complete step 11 abov e, the printer will exit Extended Ser vice mode within a fe w minutes. Country code softs w itc h seq uenc es Country Code Coun[...]
-
Page 109
EN LJ 3100/3150 Service mode functions 107 2 Firmware and software downloads Newer v ersions of the firm ware and software f or the HP LaserJet 3100/ 3150 product can be do wnloaded to the product f rom the f ollowing websites: • http://www .hp.com/support /lj3100/ • http://www .hp.com/support /lj3150/ After you connect to the sit e, clic k Dri[...]
-
Page 110
108 Chapter 2 – Service mode EN Recalibration of the document scanner Recalibrate the document scanner if y ou notice that copies, items scanned to the c omputer , or fax e s you send hav e blac k or white lines running through them. T o re calibrat e the doc ument sca nner 1 Clean the HP LaserJet 3100/3150 product bef ore recalibrating it. (See [...]
-
Page 111
EN LJ 3100/3150 Service mode functions 109 2 T o calibrate the document scanner (continued) 11 Examine the calibration gr aph. A dip in the calibration graph can indicate an image def ect. Note Dips at the ends of t he calibration gr ap h are normal. 12 Line up the calibration graph with a newly copied page. If the dip in the calibration graph corr[...]
-
Page 112
110 Chapter 2 – Service mode EN LJ 3200 Service mode functions Secondary Service menu Use the Secondary Service menu to perf orm various tests and print serv ice repor ts. Below is a hierarchical diagram of the Secondary Service menu . T o gain access to the Secondary Service menu 1 Make sure that R EADY appears on the control-panel displa y . 2 [...]
-
Page 113
EN LJ 3200 Service mode functions 111 2 Developer ’ s me nu Use the Developer ’ s menu to adjust f ax data-store parameters and to run various tests. Belo w is a hierarchical diagram of the De veloper ’ s menu. T o gain access t o the Develop er ’ s menu 1 Make sure that R EADY appears on the control-panel displa y . 2 Press E NTER /M EN U [...]
-
Page 114
112 Chapter 2 – Service mode EN T o adjust a country code parameter Note Changing the country code does not change the language. 1 Make sure that R /W PARAM ETER . appears on the co ntrol-panel display . 2 Press 3 on the control-panel ke y pad, and then press E NTER /M ENU . 3 Use the control-panel ke y pad to input the countr y c ode (see the ta[...]
-
Page 115
EN LJ 3200 Service mode functions 113 2 4 P ower-cycle the product by unpl ugging (or turning off) the product and then plugging back in (o r tur ning on) the produc t. T o adju st a fax da ta-s tor e par ame te r CA UTION When you adjust f ax data-store parameters, the product does not aler t you of incorrect input values. Changing fax data-store [...]
-
Page 116
114 Chapter 2 – Service mode EN T o gain access to Diagnostic mode 1 Unplug (or tur n off) the pr oduct from the power source. 2 Press and hold down V OL UME , S TOP /C LE AR , and 1 on t he one-touch ke y pad simultaneously . 3 Continue to hold down the b u ttons while you plug bac k in (or tur n on) the product, through the entire po wer-on seq[...]
-
Page 117
EN LJ 3200 Service mode functions 115 2 T o check butt ons in Diagnostic mode 1 Press 9 on the one-touch ke y pad. 2 Press each button on the control panel. 3 Press an extra button. F or each button press ed during the test, a + c haracter appears on the LCD (initially , fiv e + characters appear on the screen to account f or the 9 on the one-touch[...]
-
Page 118
116 Chapter 2 – Service mode EN NVRAM initialization The NVRAM initialization sets all def ault variables stored in NVRAM back to f actor y default v alues or to a def ault ROM value , depending on the variab le, and performs a system reset. CA UTION P erforming NVRA M initialization can cause the product to violate local telephone regulations. R[...]
-
Page 119
EN LJ 3200 Service mode functions 117 2 PJL software c ommands T o set the f ollo wing NV RAM variables : F actor y printer DEF AUL T P AP ER and scanner factory default paper size wil l be set to the same value automatically . F ac tory pr inter D EF AUL T LP ARM: PCL SYMS ET F actory DEF A UL T OEM bit F actory DEF A UL T PRINTP AGECOUNT F actor [...]
-
Page 120
118 Chapter 2 – Service mode EN The table below provides a more detailed descr iption of the NVRAM PJL factory variables and commands and shows possible settings for each. NVRAM PJL factory variab les NVRAM PJL variable or command P ossible settings DEF A UL T P APE R “ Letter ” , “ Legal ” , “ A4 ” , “ Executiv e ” , “ Com10 ?[...]
-
Page 121
EN LJ 3200 Service mode functions 119 2 NVRAM PJL fact ory variable s T o use the following commands, you need some method t o send PJL commands to the pr inter , either with a software tool or by copying a binary f ile that contains the commands from the host using an MS-DOS box. For e xample, from the MS-DOS prompt: copy /b filename lpt1 Here is [...]
-
Page 122
120 Chapter 2 – Service mode EN LJ 4100 Service mode functions Serv ice mode should be used only by authorized ser vice personnel. The fol lo wing can be don e in Ser vice mode: • V erify and set t he page count and s erial number. These are shown on the configuration page . • Set the cold-reset p aper size default. (This sets the factory de [...]
-
Page 123
EN LJ 4100 Service mode functions 121 2 Changing settings The item-count v alue is changed using a diff erent method from that used for other control-panel values . Instead of increasing the entire v alue by increments , each digit can be selected and modified individually . The followi ng control-panel buttons are used to modify the page count val[...]
-
Page 124
122 Chapter 2 – Service mode EN The follo wing table shows the sequence of ke y strokes used to change the page count fr om a v alue of 000000 to a v alue of 0010480. Note Press the r ight side of M ENU , I TE M , and V ALUE to increase the val ue ( + ). Press th e left side of M ENU , I TEM , and V ALUE to decrease the v alue ( - ). Button press[...]
-
Page 125
EN LJ 4100 Service mode functions 123 2 Mai nte na nce c o unt The maintenance page count should be reset only aft er a maintenance kit has been installed. This resets the m aintenance counter so that the message PERFORM PRINTER MAINTENANC E will appear after another 200,000 pages (defaul t). 1 Hold down -I TEM and -V ALUE . 2 T urn the printer o n[...]
-
Page 126
124 Chapter 2 – Service mode EN Cold reset paper The cold-reset paper size is stored in NVRAM. When a pr inter cold reset is performed, the def ault paper size (in the Printin g menu) is set to the v alue sav ed for the cold-reset paper size . P os sible v alu es are COLD RE SET PAPER=L ETTER and COLD RE SET PAPER=A4 . When replacing the f or mat[...]
-
Page 127
EN LJ 4100 Service mode functions 125 2 T ray 1 left margi n This item can b e used to adjust t he margin between the left side of the pages from tra y 1 and the left side of the printed image. 1 Press I TEM until TRAY 1 LEFT MARG IN=07 appears. 2 Press V ALUE to increase or decrease the margin. 3 Press S ELECT to sav e the new margin adjustment. T[...]
-
Page 128
126 Chapter 2 – Service mode EN T esting the printer When you print a configuration page, the printer checks its internal controller and I/O inte rf a ce and then pr ints a test page. Y ou can re vie w the configuration page printout to verify proper installation of s uch options as paper tra ys or printer languages. F or more information, see th[...]
-
Page 129
EN LJ 4100 Service mode functions 127 2 Resetting the print er Cold reset Cold reset clears all data from the print er memor y and sets m any of the def ault s back to the f actor y settings. CA UTION P erforming a cold reset resets the HP Jetdirect configuration. T o a void making changes to your configur ation, remo v e the HP Jet direct card bef[...]
-
Page 130
128 Chapter 2 – Service mode EN NVRAM initia lization Initialization of NVRAM should alwa y s be ex ecuted immediately after replacing the f or matter board. This procedure aligns the firmware with the f ormatter . Not initializing NVRAM could re sult in deter ioration of print quality . CA UTION Initializ ing NVRAM will erase se veral of the mem[...]
-
Page 131
EN Chapter contents 129 3 P o wer supply Chapter contents AC and DC power distribution................................ .......................... 130 HP LaserJet 1200 Series printer ........................ .. .... .. .... .. ..... 130 HP Las erJet 2200 Ser ies printer................................ .... .. ..... 132 HP Las erJet 3100 and 3150 Ser[...]
-
Page 132
130 Chapter 3 – Pow er supply EN A C and DC power distrib ution HP LaserJe t 1200 Ser i es printer The AC , DC, and high -v oltage power-supply circuits are all c ontained within the ECU . A C power distrib ution The AC power circuitry supplies AC v oltage whene v er the power cord is connected to the AC power source . T he A C voltage is distrib[...]
-
Page 133
EN AC and DC power distribution 131 3 Overcurrent/overvoltage There are two overvoltage de v ices in this pr inter : • Fuse F101 provides overcurrent protection for the fusing system circuitr y . Checking or re placing the fuse requires the remov al of the ECU. Fuse F102 provides overcurrent protection to the pr inter DC power-supply circuitry . [...]
-
Page 134
132 Chapter 3 – Pow er supply EN HP LaserJet 2200 Ser ies printer • The power swit ch supplies AC power to the low-v oltage power- supply circuit when it is turned on. This circuit supplies DC voltage (+24 V , +5 V , +3. 3 V) to the main motor , laser/scanner unit, interlock s witch, f or m atter, solenoids, paper feeder , high-volt age power s[...]
-
Page 135
EN AC and DC power distribution 133 3 HP LaserJet 3100 and 3 150 Serie s printer The AC , DC, and high-voltage power supply circuits are all contained within the ECU . A C power distrib ution The AC power circuitry supplies AC v oltage whene v er the power cord is connected to the AC power source . T he A C voltage is distributed to the DC power su[...]
-
Page 136
134 Chapter 3 – Pow er supply EN Overcurrent/overvoltage There are two overvoltage de v ices in this pr inter : • Fuse F101 provides overcurrent protection for the fixing system circuitr y . T o chec k or replace the fuse requires the remov al of the ECU. Fuse 102 (found onl y on 110 V units) provides ov erc urrent protection to the printer DC [...]
-
Page 137
EN AC and DC power distribution 135 3 HP LaserJet 3200 Ser ies printer The AC , DC, and high -v oltage power-supply circuits are all c ontained within the ECU . A C power distrib ution The AC power circuitry supplies AC v oltage whene v er the power cord is connected to the AC power source . T he A C voltage is distributed to the DC power-supply ci[...]
-
Page 138
136 Chapter 3 – Pow er supply EN Overcurrent/overvoltage There are two overvoltage de v ices in this pr inter : • Fuse F101 provides overcurrent protection for the fusing-syst em circuitr y . Checking or re placing the fuse requires the remov al of the ECU. Fuse F102 (found only on 110 V units) pro vides overcurrent protection to the printer DC[...]
-
Page 139
EN AC and DC power distribution 137 3 HP LaserJet 4100 Ser ies printer A C/DC power distrib ution In this circuit, the AC power input from the power receptacle is conv e rt ed into DC power . The DC power is supplied to the loads. The AC power is supplied to the low-v oltage power-supply circuit in the engine controller board when the po wer s wit [...]
-
Page 140
138 Chapter 3 – Pow er supply EN Figure 4 Low-voltage pow er -supply circuit ( LJ 4100 s eries)[...]
-
Page 141
EN AC and DC power distribution 139 3 Overcurrent/overvoltage protectio n If a shor t-circuit or other problem on the load side c auses an e xcessiv e current flow or generates abnor mal voltage, t he overcurrent/ ov e rvoltage protection system s automatically cut of f the output voltage to protect the power-supply c ircuit. If the overcurrent or [...]
-
Page 142
140 Chapter 3 – Pow er supply EN Pr otection systems Problems on the load side , such as shor t circuits, can cause an excessiv e f low of current from the DC power supplies or can generate abnormal voltage. When this happens, the e xcess -cur rent and excess-v oltage protection systems automatically shut off the output v oltage to protect the po[...]
-
Page 143
EN Chapter contents 141 4 Input/output (I/O) Chapter contents Bidirectional interfaces ...................................................... .... .... ....... 142 Attach ing the parall e l cables ......... ........ ...... ......... ...... ........... 143 Network inter faces ... ......... ...... .... ...... ..... ...... .... ...... ..... ...... ...[...]
-
Page 144
142 Chapter 4 – Input/output (I/O) EN Bidirectional inter faces The formatter receives incoming data through its bidirectional interf ace (IEEE 1284) or USB interface . The parallel interface or USB interface both provide high-speed, two-w ay communication between the printer and the host, letting the user change printer settings and monitor prin[...]
-
Page 145
EN Bidirectional interfaces 143 4 Attachin g t h e parall el cabl es The printer ’ s parallel port can have one or both of the f ollowing connectors: • B-type parallel (l arge) • C-type parallel (small) Figure 5 Printer-interface connections B-type C-type[...]
-
Page 146
144 Chapter 4 – Input/output (I/O) EN Netw ork interfaces LocalT alk I/O The printer im plements AppleT alk networ king protocol through LocalT alk hardware. The LocalT alk network cable is connected thro ugh the EIO card. Note This f eature applies to t he LJ 2200 and LJ 4100 only . Expanded I/O The optional ex panded I/O card can be installed i[...]
-
Page 147
EN IR inter face 145 4 IR interfac e The FIR por t is located on the lower right corner of t he 2200 printer or is av ailable as an accessory on the 4100 printer. This por t is compliant with the specifications determined by the I rDA . On the right side of the FIR por t is a status light that i ndicates when the por t is active. The F I R por t tr[...]
-
Page 148
146 Chapter 4 – Input/output (I/O) EN Communications tr oubleshootin g Communications chec k Note Communication problems are norma lly the customer ’ s responsibility . Time spent attem pting to resolve these problems might not b e cov ered b y the Hewlett-P ac ka rd warranty . T est message After the printer is installed, v er i fy com municat[...]
-
Page 149
EN Maximum I/O cable lengt hs 147 4 Maxim um I/O cable lengths F or information about cables used f or a specific HP LaserJet printer, see chapter 7. Cab le Len gth P arallel (non-IEEE-1284) 3 meters (10 feet) P arallel (IEEE-1284) with “ B ” type connector 3 meters (10 feet ) P arallel (IEEE-1284) with “ C ” type connector 3 meters (10 fee[...]
-
Page 150
148 Chapter 4 – Input/output (I/O) EN[...]
-
Page 151
EN Chapter contents 149 5 Media specifications Chapter contents Paper sizes . .................................... ................. ...... ............... ........... 150 Paper specifications ................................... .... .. .... .. ....... .... .. .... .. ....... 151 U.S. paper grades ................... ......................... .....[...]
-
Page 152
150 Chapter 5 – Media specifications EN Pape r sizes For complete paper specifications for all HP LaserJet printers, see the HP LaserJet Printer Family Print Media Guide . Metric sy stem Siz e Met ric d ime nsio ns U. S. dim ens ions A3 297 by 420 mm 11.7 by 16.5 in A4 210 by 297 mm 8.3 by 11.7 in A5 148 by 210 mm 5.8 by 8.3. in B4 (ISO ) 250 by [...]
-
Page 153
EN Paper specifications 151 5 Paper speci fic ations Paper spec ifications Category Sp ecification Acid con tent 5.5 pH to 8.0 pH Basis weight (1 200 series ) : Paper -in put tra y Priori ty-inp ut tray 75 g/m2 ( 20 lb) 75 g/m 2 (20 lb) Basis weight (2 200 series ) : Tray 1 Tray 2 Tray 3 (250- sheet fe eder) Tray 3 (500- sheet fe eder) Duple xer 60[...]
-
Page 154
152 Chapter 5 – Media specifications EN U.S. paper gr ades The U.S. paper grading system ha s evolved from custom and us age rather than from a technical background, resulting in similar papers having different stated weights. For example, a 24# bond paper is exactly the sam e weight as a 60# book or a 60# text or a 33# cover. This is because bas[...]
-
Page 155
EN U.S. paper gr ades 153 5 Tag 24 by 36 in 864.0 s q. in 2.31 55# tag Metric weight none none 3.7 6 90 g/m 2 U.S. pap er grades: basic sizes a nd basis w eights[...]
-
Page 156
154 Chapter 5 – Media specifications EN Wei ght equi vale nce ta ble The following rows show equivalent weights for different gra des of paper. Shaded boxes indicate a commonly available standard weight for that grade. Weight equivalenc e table Bond wei ght (17 x 22 inch es) Book weight (25 x 38 inches) Cover weight (20 x 26 inch es) Bristol weig[...]
-
Page 157
EN Weight equivalence table 155 5 Note Text and book grades marked with an * actually calculate out to 51, 61, 71 and 81 but are rounded to standard book wei gh ts of 50, 60, 70 and 80. 70# 178# 9 8# 120# 14 6# 162# 264 g /m 2 72# 183# 100# 123# 150# 1 66# 271 g/m 2 Weight equivalenc e table (conti nued) Bond wei ght (17 x 22 inch es) Book weight ([...]
-
Page 158
156 Chapter 5 – Media specifications EN Troublesho oting me dia problem s Paper problems can be difficult to detect. The fol lowing series of steps will help isolate media-induced problems versus printer problems: • Isolate a paper path. • Isolate a brand of m edia. • Isolate a type of media. • Evaluate media-use practices. • Evaluate e[...]
-
Page 159
EN General tips 157 5 Gener al tips Paper curl Paper curl results from both the heating process used to bond the print image (toner) to the media and f rom the path that t he media must negotiate through the print er. Take the following actions t o help reduce paper curl: 1 Turn the media ov er in the input tray. Some media packages (reams) have an[...]
-
Page 160
158 Chapter 5 – Media specifications EN Envelope spec ifications Envelope s pecifications Category Specifi cations Basis weight All printers except LJ 2200 : Should not exceed 105 g/m2 (28 lb) LJ 2200 printer only : 100 g/m2 (27 lb) Caliper 0.084 to 0.14 mm (3.3 to 5.5 mils) single-layer thickness Cur l All printers except LJ 2200: Less than 6 m [...]
-
Page 161
EN Envelope sp ecifications 159 5 Envelop e size s Envelop es to avoi d Do not use the following env elopes: • with clasps, snaps, o r tie strings • with transparent windows, holes, perforations, or cutouts • having an open flap wit h adhesive exposed • having paper, inks, adhesives, or materials that discolor, melt, offset, or release haza[...]
-
Page 162
160 Chapter 5 – Media specifications EN Envelop e feeding Follow these preventive m easures when feeding env elopes: • Envelopes can be manually fed through the printer, or they can be fed automatically through an envelope tray or feeder. • Closely inspect the leading edge of t he envelopes before feeding them into the printer. • Ensure tha[...]
-
Page 163
EN Label specifications 161 5 Label specificati ons Label spe cifications Category Specificatio ns Adhesive Must not be on any external surfaces of the label before, during, or after printing. Label construction and die-cutting must not allow labels to peel off during transport, printing, or fusing. Caliper All printers except L J 2200: Mus t not e[...]
-
Page 164
162 Chapter 5 – Media specifications EN Preventing jams caused by labels As with envelopes, prevention is the bes t way to avoid printer malfunctions caused by adhesive labels. To prevent jams and feed problems, labels must meet the following requirements: • Be cut long grain (as opposed to short grain). • Totally cover the carrier sheet (no [...]
-
Page 165
EN Transparency sp ecifications 163 5 Transparency specificati o ns Prevent ing jams caused by transparencies Use these prevent ive measures to avoid printer malfunctions caused by transparencies: • Use the straightest paper path to avoid curling and ot her problems . • Use transparenc ies with the correc t resistivity. • Use transparencies t[...]
-
Page 166
164 Chapter 5 – Media specifications EN HP paper training video HP has developed a training video that shows how paper is manufactured and how t he manufacturing process relates to the use of paper in HP Las erJet printers. P art numbers for the video are shown below. The Pa per Tra ining vi deo expla ins the man ufactur ing proce ss. Part Number[...]
-
Page 167
EN Chapter contents 165 6 T oner car tr idge inf or mation Chapter contents Cartridge weights and page counts . .................. .... ....... .... .. .... .... ..... 166 Potential toner cartridge issues ............................................... ......... 167 Banding.......................... ................... ..................... .......[...]
-
Page 168
166 Chapter 6 – Toner cartridge informati on EN Cartr idge weights and page counts Cartridge weights and page counts HP LaserJet printer Pr oduct Full weigh t Empty weight Pag e c ou nt at 5 % coverage LJ 1200 serie s C7115A 746.9 gm (26.4 oz) 7 42 gm (21.8 oz) 2 ,500 LJ 2200 serie s C4096A 1105 gm (39 oz) 900 gm (31.7 oz) 5 ,000 LJ 3100 and 3150[...]
-
Page 169
EN Potential toner cart ridge issues 167 6 P otential toner cartridg e issues Ba nd i ng When printing with a laser printer , the toner is applied across the page in horizontal strips. The page is moved through the printer and toner is continually applied. When printing te xt or blac k image pages, a large amount of toner is deposited on t he page.[...]
-
Page 170
168 Chapter 6 – Toner cartridge informati on EN T oner crac king When the media is fol de d and the crea se aligns with a line of text, it is possible with cer tain types of media f or the text t o break along the line, giving the appearance of a white line through the text. Media that does not meet the smoothness (100 to 250 Sheffield, 100 to 50[...]
-
Page 171
EN Potential toner cart ridge issues 169 6 T ran sfer of toner image After printing a document on an HP LaserJet printer , folding it, and sending it through the mail, y ou might observe that a portion of the print image was transf erred to opposing surfaces of the f olded document. The laser printing process uses a pigmented, plastic powder (toner[...]
-
Page 172
170 Chapter 6 – Toner cartridge informati on EN T ransfer of toner image (continued) Because of the wa y that laser printing is accomplished, currently there is no way to entirely eliminate the possibility of toner transf er . Howe ver , using these techniques should yield more satisf actor y results and will often reduce the problem t o imperc e[...]
-
Page 173
EN Recycling toner cartridges 171 6 Recyc ling toner cartridges In many countries, HP toner car tridges can be retur ned to HP through the HP Printing Supplies Environmental Program. An easy-to-use tak e- back component of t he program is a vailab le in more than 20 countries. Multilingual program inf or m ation and instructions are included in ev [...]
-
Page 174
172 Chapter 6 – Toner cartridge informati on EN Refilled toner cartridg es HP polic y on non-HP to ner cartridges Hewlett-P ackard Company cannot reco mmend us e of new , refilled, or remanufactured, non-HP toner cartridges. Because they are not HP products, HP cannot influence their des ign or control t heir quality . While Hewlett-P ackard Comp[...]
-
Page 175
EN Ton er s afet y 173 6 T oner sa fety Handling and storag e W ARNING! K eep toner car tridges and toner par ticles awa y from excessive heat, sparks, and open f lames. If toner is spilled, avoid breathing in toner par ticles. Inhalation of toner par ticles can cause respiratory tract irritation. V acuum or sweep the material into a bag or other s[...]
-
Page 176
174 Chapter 6 – Toner cartridge informati on EN[...]
-
Page 177
EN Chapter contents 175 7 Pr inter options and replaceab le par ts Chapter contents Printer options and replaceable parts ..................................... ......... 176 Orderin g par t s ........ .. ......... .. ........ .. ......... .. .......... ......... .. ........ .. ......... 184[...]
-
Page 178
176 Chapter 7 – Printer options and replaceable parts EN Printer options and replacea ble par ts Pr oduct Pr oduct numb er Product descript ion Service par t num ber Memory C4140A 4 MB SDRAM D IMM C4140-67901 C4141A 8 M B SDRAM DIMM C4141-67 901 C7842A 8 M B SDRAM DIMM C7842-67 901 (Europ e only) C4142A 16 M B SDRA M DIMM C41 42-67 901 C7843A 16 [...]
-
Page 179
EN Printer options and replaceable parts 177 7 1200 2200 3100/3150 3200 4100 l ll ll ll ll l ll ll ll ll l l l l l l l l l l l[...]
-
Page 180
178 Chapter 7 – Printer options and replaceable parts EN Pr oduct Pr oduct numb er Product descript ion Service par t n umbe r Fonts C4292A T raditi onal Chin ese Font DIMM (8 MB As ian R OM) N/A C4293A Simplified Chinese Fo nt DIMM (8 MB As ian R OM) N/A D4838 A K or ean (8 MB As ian R OM) N/A Enhanced I/ O cards J3110 A E ther net RJ- 45 on ly [...]
-
Page 181
EN Printer options and replaceable parts 179 7 1200 2200 3 100/3150 3200 4100 l l l ll ll l ll l ll l ll l ll ll l l ll l l[...]
-
Page 182
180 Chapter 7 – Printer options and replaceable parts EN Pr oduct Pr oduct numb er Product descript ion Service par t num ber Tr a y s C8055A 500 -sheet pap er feeder a nd tray C8055-67 901 C8056A Stand ard 50 0-sheet tray (without the feeder) C80 56-67 901 C7065A 500 -sheet f eeder and tray R75-50 09-00 0CN C4793A 250 -sheet paper feeder a nd tr[...]
-
Page 183
EN Printer options and replaceable parts 181 7 1200 2200 3 100/3150 3200 4100 l l ll ll ll l l l lllll lllll l l l l l l l l l[...]
-
Page 184
182 Chapter 7 – Printer options and replaceable parts EN Product Pro duct description Service par t nu mbe r Exch ange numb er Maintenance kit Maintenan ce kit (11 0 V) C8057A C8057-6900 1 Mainten ance kit (220 V) C8058A C8058-6 9001 HP J e td i r e c t print ser vers 70X J41 55A N/A 170X J3258B N/ A 175X J6035- 60001 N/ A 300X J3263 N/ A 500X (f[...]
-
Page 185
EN Printer options and replaceable parts 183 7 1200 2200 3 100/3150 3200 4100 l l l l l l l l l l ll l[...]
-
Page 186
184 Chapter 7 – Printer options and replaceable parts EN Or deri ng parts P art s can be ordered through HP ’ s Cus tomer Ser vices and S uppor t Organization (CSSO) at: • (1) (800) 227-8164 (U . S. only) • (49 7031) 142253 (E urope only) F or more ser vice and suppor t informat ion, see chapter 11.[...]
-
Page 187
EN Chapter contents 185 8 Printer parts Chapter contents Orderin g prin t er parts ...... .. ........ .. ......... .. .......... ......... .. ........ .. ......... .. 18 6 Common har dware .... ......... ...... ........... ........ ...... ......... ...... .... ...... ..... 187 Parts fo r the HP L a ser Jet 1200..... ....... ........ .. ........ ...[...]
-
Page 188
186 Chapter 8 – Printer p arts EN Ordering pri nter part s To order printer pa rts, call the Cus tomer Services and Support Organization (CSSO): • (1) (800) 227-8164 (U.S. only) • (49 7031) 142253 (E urope only) For more service and support information, see chapter 11. Note This chapter provides the part numbers and descript ions of the most [...]
-
Page 189
EN Common hardware 187 8 Common h ardware 1 2 3 4 5 6 7 8 9 10[...]
-
Page 190
188 Chapter 8 – Printer p arts EN Part number Product description 0515-2672 M3 x 8 mm Pan-head ph illips FA9-1449-000CN M3 x 6 mm Wa sher-head phillips XA9-0192-000CN M4 x 6 mm Star-washer phillips XA9-0267-000CN M3 x 6 mm Washer-head phillips XA9-0302-000CN M3 x 8 mm Self-tapping phillips XA9-0382-000CN M3 x 12 mm Se lf-tapping phillips XA9-0434[...]
-
Page 191
EN Common hardware 189 8 XB4-7401-000CN M4 x 10 mm Se lf-tapping phillips XB4-7401-007CN M4 x 10 mm Se lf-tapping phillips XB4-7401-207CN M4 x 12 mm Se lf-tapping phillips XB4-7401-209CN M4 x 12 mm Se lf-tapping phillips XB6-7300-407CN M3 x 4 mm Self-tapping phillips XB6-7300-807CN M3 x 8 mm Self-tapping phillips XB6-7400-809CN M3 x 8 mm Self-tappi[...]
-
Page 192
190 Chapter 8 – Printer p arts EN Parts for the HP Laser Jet 1200 Major as semblies Figure 6 Major assembly locations (1200 se ries, 1 o f 3)[...]
-
Page 193
EN Parts for the HP LaserJet 1200 191 8 HP Laser Jet 1200 assemblie s Ref. Part number Description 1 RG0-1013-000CN P rinte r-pickup t ray assem bly 2 RG0-1014-000CN P aper-pic kup cover assembly 3 R37-5020-000CN Optional copier/scanner 4 RG0-1069-000CN C opier/scanner pickup-tray assem bly 5 RG0-1070-000CN F ac e-down tray assembly 6 RY7-5055-000C[...]
-
Page 194
192 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 7 Major assembly locations (1200 se ries, 2 o f 3)[...]
-
Page 195
EN Parts for the HP LaserJet 1200 193 8 HP Laser Jet 1200 assemblie s (continue d) Ref. Part number Description 1 RA0-1181-000CN Shutter guide 2 RA0-1182-000CN Shutter lever 3 RA0-1169-000CN Compres sion spring 4 RG9-1486-000CN L aser/scanner as sembly 5 RG0-1074-000CN C able, laser/scanner 6 RG0-1020-000CN P ickup-gear a ssembly 7 RA0-1184-000CN C[...]
-
Page 196
194 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 8 Major assembly locations (1200 se ries, 3 o f 3)[...]
-
Page 197
EN Parts for the HP LaserJet 1200 195 8 HP Laser Jet 1200 assemblie s (continue d) Ref. Part number Description 1 RG0-1022-000CN F ront-guide assem bly 3 RG0-1030-000CN F an asse mbly 4 RA0-1173-000CN Lever holder 5 RA0-1174-000CN L ever 6 RA0-1175-000CN Tension spring 7 RA0-1185-000CN Fuser plate, left 8 RA0-1186-000CN Fuser plate, right 9 RH7-528[...]
-
Page 198
196 Chapter 8 – Printer p arts EN Parts for the HP Laser Jet 2200 Major as semblies Figure 9 Major assembly locations (2200 se ries, 1 o f 5)[...]
-
Page 199
EN Parts for the HP LaserJet 2200 197 8 HP Laser Jet 2200 assemblie s Ref. Part number Description 1 RB2-6246-000CN Plate, grounding 2 RB2-6255-000CN Mount, fan 3 RH7-1463-000C N Fan 4 RB2-6261-000CN Eliminator, static charge 5 RB2-2837-000CN Spring, torsion 6 RB2-2836-000CN Lever, sensor 7 RG5-5598-000CN P aper feeder cable 8 RG5-5591-000CN L aser[...]
-
Page 200
198 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 10 Major ass embly locations (22 00 series, 2 o f 5)[...]
-
Page 201
EN Parts for the HP LaserJet 2200 199 8 HP Laser Jet 2200 assemblie s (continue d) Ref. Part number Description 1 RG5-5566-000CN E ngine controller assembly 2A C4209-60001 Formatter PCB 2B C7058-00001 Formatter RFI shield 3A RB2-2944-000CN Guide, EIO 3B RB2-2945-000CN Plate, mount , EIO 4 RH7-1461-000C N Reverse motor, 23 V DC 5 RH2-5425-000C N Fla[...]
-
Page 202
200 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 11 Major ass embly locations (22 00 series, 3 o f 5)[...]
-
Page 203
EN Parts for the HP LaserJet 2200 201 8 HP Laser Jet 2200 assemblie s (continue d) Ref. Part number Description 1 RB2-2926-020CN Bushing, t ransfer, right 2 RB2-3040-000CN Gear, 26T 3 RB2-3043-000CN Bushing, left 4 RB2-3044-000CN Bushing, right 5 RB2-6248-000CN D amper 6 RB2-6250-000CN Rod, jam clearing 7 RB2-6251-000CN Lever, jam clearing 8 RS6-04[...]
-
Page 204
202 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 12 Major ass embly locations (22 00 series, 4 o f 5)[...]
-
Page 205
EN Parts for the HP LaserJet 2200 203 8 HP Laser Jet 2200 assemblie s (continue d) Ref. Part number Description 1 RB2-3041-020CN Hinge, left 2 RB2-3042-020CN Hinge, right 3 RF5-3272-000CN P ad, separation 4 RS6-0464-000CN Gear, 20T 5 RS6-2030-000CN Spring, tension 6 RB2-3073-000CN Shaft, drive, 1 7 RB2-3075-000CN Spring, leaf, grounding 10 RB2-3080[...]
-
Page 206
204 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 13 Major ass embly locations (22 00 series, 5 o f 5)[...]
-
Page 207
EN Parts for the HP LaserJet 2200 205 8 HP Laser Jet 2200 assemblie s (continue d) Ref. Part number Description 1 RB2-6262-000CN Spring, com pression 2 RB2-6263-000CN Spring, com pression 3 RB2-6265-000CN Spring, com pression 4 RB2-6267-000CN Spring, com pression 5 RB2-6271-000CN Spring, com pression 6 RG5-5552-000CN D uplex solenoid assembly 6B XA[...]
-
Page 208
206 Chapter 8 – Printer p arts EN Parts for the HP Laser Jet 3100/ 3150 Major as semblies Figure 14 Major assembly locations (3100 and 3150 series) 2 3 4 5 1 6 7 8 9[...]
-
Page 209
EN Parts for the HP LaserJet 3100/3150 207 8 HP Laser Jet 3100 and 3150 a ssemblies Ref. Part number Description 1 RG5-3486-040CN P ickup-roller assembly 2 RG5-3484-070CN P aper-pic kup assem bly 3 RG5-3452-000CN T ransfer assembly 4 RG5-3474-020CN D elivery assembly 5 RG5-3475-040CN S eparation-guide assembly 6 RG5-4771-000CN D ocument-scanner ass[...]
-
Page 210
208 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 15 Major assembly locations (3100 and 3150 series)[...]
-
Page 211
EN Parts for the HP LaserJet 3100/3150 209 8 HP Laser Jet 3100 and 3150 a ssemblies (continued ) Ref. Part number Description RG5-3484-070CN P aper pickup ass e mbly RG5-3486-040CN P ickup roller assem bly RG5-3474-020CN D elivery assembly 1 RB2-3345-000CN C ap 2 RB1-7247-000CN Paper guide 3 RB2-3350-000CN Cable guide, f ormatter 4 RF5-2664-000CN R[...]
-
Page 212
210 Chapter 8 – Printer p arts EN 23 C3948-00002 RFI shield 24 C3948-60001 LIU board (U.S.) 24 C3948-60002 LIU board (worldwide) 25 0515-2672 Screw, M3X6 (9) 501 XB4- 7400-807CN Screw, tapping, truss head, M4X8 (3) Ref. Part number Description[...]
-
Page 213
EN Parts for the HP LaserJet 3100/3150 211 8[...]
-
Page 214
212 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 16 Major assembly locations (3100 and 3150 series)[...]
-
Page 215
EN Parts for the HP LaserJet 3100/3150 213 8 HP Laser Jet 3100 and 3150 a ssemblies (continued ) Ref. Part number Description 1 RY7-5005-000CN Gear kit #1 2 RB1-7288-020CN Bushing (2) 3 RB1-7105-000CN Press ure release lever 4 RB2-1632-000CN Gear sup port plate 5 RB1-7107-000CN Gear holder 6 RY7-5007-000CN Fuser re lease kit 7 RH7-1320-000C N M ot [...]
-
Page 216
214 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 17 Major assembly locations (3100 and 3150 series)[...]
-
Page 217
EN Parts for the HP LaserJet 3100/3150 215 8 HP Laser Jet 3100 and 3150 a ssemblies Ref. Part number Description RG5-3475-040CN S eparation guide assem bly 1 RB1-7223-000CN Groundin g clip 2 RB1-7246-000CN Bushing (2) 3 RB1-7341-030CN Right cartridge guide #1 4 RF5-2364-000CN P ress ure roller 5 RF5-1517-020CN P ress ure plate 6 RF5-2358-000CN T ra[...]
-
Page 218
216 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 18 Major assembly locations (3100 and 3150 series)[...]
-
Page 219
EN Parts for the HP LaserJet 3100/3150 217 8 HP Laser Jet 3100 and 3150 a ssemblies Ref. Part number Description 1 RB2-3346-000CN Speaker m ount 2 RB2-3342-000CN Bottom plate 3 RB2-3347-000CN Spacer, PCB (7) 4 RF5-2663-000CN F oot (4) 5 RG5-2035-000CN C able, laser 6 RH2-5346-000C N C able, formatter 7 RH6-3845-000C N Speaker 8 RG5-2029-000CN C abl[...]
-
Page 220
218 Chapter 8 – Printer p arts EN Parts for the HP Laser Jet 3200 Major as semblies Figure 19 Major ass embly locations (32 00 series) 1 2 3 4 5 6[...]
-
Page 221
EN Parts for the HP LaserJet 3200 219 8 HP Laser Jet 3200 assemblie s Ref. Part number Description 1 RG5-5399-000CN D ocument feeder 2 RG5-5402-000CN U pper-guide assembly 3 RG5-5406-000CN C ontrol-panel assembly 4 RG9-1480-000CN F eed ass embly 5 RG5-4599-000CN D oor-sensor assem bly 6 RG5-5411-000CN P rinte r-door assem bly[...]
-
Page 222
220 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 20 Major ass embly locations (32 00 series)[...]
-
Page 223
EN Parts for the HP LaserJet 3200 221 8 HP Laser Jet 3200 assemblie s (continue d) Ref. Part number Description 1 RB2-4324-000CN S heet 2 RB2-4017-000CN Cable holder 3 RB2-4030-000CN Scanner cab le cover 5 RB2-3951-000CN Static charge eliminator 6 RB2-3952-000CN Spring, torsion 7 RB2-3953-000CN Spring, torsion 8 RB2-4054-000CN Sheet, transfer 9 RB2[...]
-
Page 224
222 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 21 Major ass embly locations (32 00 series)[...]
-
Page 225
EN Parts for the HP LaserJet 3200 223 8 HP Laser Jet 3200 assemblie s (continue d) Ref. Part number Description 1 RG5-4584-000CN R oller holder assembly 2 RB2-3930-000CN Shaft, pick up roller 3 RG5-4585-000CN G ear assembly 4 RG5-5421-000CN L aser/scanner as sembly 5 RB2-3943-000CN S haft 6 RB2-3944-000CN Spring, leaf 7 RB2-3945-000CN Foot 8 RB2-39[...]
-
Page 226
224 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 22 Major ass embly locations (32 00 series)[...]
-
Page 227
EN Parts for the HP LaserJet 3200 225 8 HP Laser Jet 3200 assemblie s (continue d) Ref. Part number Description 1 RG5-4582-000CN P aper guide plate as sembly 2 RB2-4219-000CN Plate, grounding 3 RB2-3947-000CN Holder, pad 4 RF5-2832-000CN A rm , pad 5 RB2-3960-000CN Flag, sen sor 6 RB2-3961-000CN Spring, torsion 7 RF5-2818-000CN G uide, cartridge, l[...]
-
Page 228
226 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 23 Major ass embly locations (32 00 series)[...]
-
Page 229
EN Parts for the HP LaserJet 3200 227 8 HP Laser Jet 3200 assemblie s (continue d) Ref. Part number Description 1 RY7-5050-000CN Sub pad kit (includes left and right) 2 RG5-5388-000CN M et al clip, fusing element (right) 3 RB2-3939-000CN Bushing, right 4 RB2-3940-000CN Spring, com pression 5 RB2-3950-000CN Guide, transfer 6 RB2-3956-000CN Bushing, [...]
-
Page 230
228 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 24 Major ass embly locations (32 00 series)[...]
-
Page 231
EN Parts for the HP LaserJet 3200 229 8 HP Laser Jet 3200 assemblie s (continue d) Ref. Part number Description 1 RB1-7303-000CN S pacer 2 RB2-3984-000CN ECU pan 3 RB2-3985-000CN Sheet, insulating 4 RB2-3986-000CN Holder, power switch lever 5 RB2-3987-000CN Lever, power switch 6 RB2-3988-000CN Rod, switch 7 RH2-5381-000C N C able, flat 8 VS1-5057-0[...]
-
Page 232
230 Chapter 8 – Printer p arts EN Parts for the HP Laser Jet 4100 Major as semblies Figure 25 Major ass embly locations (41 00 series, 1 o f 2) 1 2 3 4 5 6 7 9 8[...]
-
Page 233
EN Parts for the HP LaserJet 4100 231 8 HP Laser Jet 4100 assemblie s Ref. Part number Description 1 RG5-5084-000CN T ray 1 pickup assembly 2 RG5-2656-080CN T ray 1 ass embly 3 C8049-69007 (110 V) C8049-69008 (220 V) Fuser a ssembl y 4 RG5-5094-050CN P aper-de livery assembly 5 RG5-2663-090CN T op-c over ass embly 6 RG5-5372-040CN C ontrol panel as[...]
-
Page 234
232 Chapter 8 – Printer p arts EN Major assemblies (continued) Figure 26 Major ass embly locations (41 00 series, 2 o f 2) 1 2 3 4 5 6[...]
-
Page 235
EN Parts for the HP LaserJet 4100 233 8 HP Laser Jet 4100 assemblie s (continue d) Ref. Part number Description 1 RG5-5087-000CN P rinter-drive assembly 2 RG5-5085-000CN R egistration assem bly 3 RG5-5086-000CN P aper-f eed assem bly 4 C8049-69003 (110 V) C8049-69004 (220 V) Engine controller-board assembly 5 RG5-5083-000CN P aper-gu ide assembly 6[...]
-
Page 236
234 Chapter 8 – Printer p arts EN[...]
-
Page 237
EN Chapter contents 235 9 Image quality Chapter contents Cleaning page ..................... .. .. .. .. .. .... ..... .. .. .. .. .. .. .. ....... .. .. .. .. .. .. .. ....... 236 LJ 1200 series .............................. ............................... ......... 237 LJ 2200 series .............................. ...............................[...]
-
Page 238
236 Chapter 9 – Image quality EN Cleaning page For print-quality defects, try generating a cleaning page from the printer control panel (LJ 1200, 2200, 3200, 4100) or from t he JetSuite Pro software (LJ 3100 and 3150). For the cleaning page to work proper ly, make sure t o print the page on a transparency or copier-grade paper (not bond or rough [...]
-
Page 239
EN Cleaning page 237 9 LJ 1200 series Note This process requires use of a transparency to re move dust and toner from the print paper path. If transparenc y film is unavailable, you can use copier-grade paper. If you m ust use paper, perform the procedure two or three times to ensure proper cleaning. 1 Load a transpare ncy in the priority input tra[...]
-
Page 240
238 Chapter 9 – Image quality EN LJ 2200 series Note This process requires use of a transparency to re move dust and toner from the print paper path. If transparenc y film is unavailable, you can use copier-grade paper. 1 Make sure the printer is turned on and in the Ready state. Load a transparency in tray 1. 2 Press Go and hold for 10 seconds. [...]
-
Page 241
EN Cleaning page 239 9 LJ 3100 a nd 31 50 se r ies 1 Place a stack of plain letter- or A4-sized paper into the paper-input bin. (Do not use thick or rough paper.) 2 For Microsoft Windows 95 or Windows 98, open Windows Explorer. OR For Windows 3.1 x , open File Manager. 3 Open the JetSuite folder (if t he JetSuite Pro software was installed to the d[...]
-
Page 242
240 Chapter 9 – Image quality EN LJ 3200 series Note This process requires copier-grade paper to remove dust and toner from the print paper path. Do not use bond or rough paper. 1 Place the copier-grade paper into the document-feeder tray. 2 Ensure that t he product is in the Ready stat e, and then press Enter/Menu . 3 Use < or > to sel ect[...]
-
Page 243
EN Cleaning page 241 9 LJ 4100 series This process requires copier-grade paper to remove dust and toner from the print paper path. Do not use bond or rough paper. Creating a cleaning page From the printer control panel, do the following: 1 Press Menu until PRINT QUALITY MENU appears. 2 Press Item until CREATE C LEANING PAGE appears . 3 Press Select[...]
-
Page 244
242 Chapter 9 – Image quality EN LJ 4100 series (continued) Using the auto-cleaning page The auto-cleaning page f eature helps keep t he fuser rollers clean, which maintains excellent output quality. The auto-c leaning page feature is accessible through the control panel and is supported through Web JetAdmin, as well. Once set up, the printer run[...]
-
Page 245
EN Image defect table 243 9 Image defect table For more information, go to the page numbers provided below each image. Bac kgro und scatter (see page 246 ) Black pa ges (see page 246 ) Blank page (see page 247) Blank spots (see p age 248) Bottom of page is blan k or graph ic image is cut o ff (see page 248 ) Char acter vo i ds (see page 248 ) Cu rl[...]
-
Page 246
244 Chapter 9 – Image quality EN Ghosting (lig ht) (see page 251 ) Ghos ting (dar k) (see page 251 ) Gray backgroun d (see page 252) Horizont al black lines o r smears (see p age 252) Horizontal smudges (see page 253 ) Horizont al whit e lines (see page 253 ) Ligh t print, dark prin t, faded p rint (see page 253) Loose to ner (see p age 254) Misf[...]
-
Page 247
EN Image defect table 245 9 Rand om black spots or t oner spec ks (see page 256 ) Repetitive defe cts (see page 256 ) Scann ed ima ges have bl ack dots or streaks in top and bott om mar gins (see page 256) Scanned image s print at reduced size (see p age 257) Scanne d text is unclear (see page 257 ) Skewed pr int (see page 257 ) Tire tracks (see pa[...]
-
Page 248
246 Chapter 9 – Image quality EN Image defect details • The media does not meet HP specifications. • The toner cart ridge is defective. • The inside of the printer is dirty. • The transfer roller is dirty or worn. • The pickup roller is dirty. • Generate a cleaning page . • The toner cart ridge was improperly installed. • The prim[...]
-
Page 249
EN Image defect details 247 9 • Your software program is sending an extra page-eject command. – Check the software ’ s printing configuration information. • The printer might be feedi ng two or more pages at once because the media is difficult to s eparate. • The sealing tape has been left in the toner cartridge. • The toner cart ridge [...]
-
Page 250
248 Chapter 9 – Image quality EN • The media does not meet HP paper specifications or is stored improperly. • The toner cart ridge is defective. • The transfer roller is dirty or defective. • The page is too complex. (T here is not enough memory to process the page.) – Reduce the resolution through the s oftware or printer driver. See t[...]
-
Page 251
EN Image defect details 249 9 • The media does not meet printer s pecifications or is stored improperly. • The media is not loaded correctly or the trays a re not adjusted properly. • The operating environment does not meet specifications. • The fuser tem perature is incorrect .* • The wrong output bin is selected. • The registration as[...]
-
Page 252
250 Chapter 9 – Image quality EN • The media does not meet HP paper specifications or is stored improperly. • The printer operating environment does not meet HP specifications. • The wrong output bin is selected. • The connection of the cables to t he laser/scanner is poor. • The connection of the cables to the E CU is poor. • The las[...]
-
Page 253
EN Image defect details 251 9 • The toner cart ridge is empty or defective. • The draft mode or economy mode is selected in the software. • The media does not meet HP paper specifications or is stored improperly. – Check the ground pat h. – Replace the ECU. • The media does not meet HP paper specifications (for example, the defect might[...]
-
Page 254
252 Chapter 9 – Image quality EN • The priority input tray is not in place. • The toner density is set incor rectly. • The media basis weight is too high. • The humidity level is too low. • The toner cart ridge is defective. • The media does not meet HP paper specifications or is stored improperly. • The laser/scanner assembly o r E[...]
-
Page 255
EN Image defect details 253 9 • The media does not meet HP paper specifications or is stored improperly. • The paper path is dirty or dam aged. • Print a cleaning page. • The toner cartridge could be defective or l ow on toner. • The toner cartridge has been expos ed to too much light. • Review the repetitive defect ruler. • The fusin[...]
-
Page 256
254 Chapter 9 – Image quality EN • The inside of the printer is dirty, print a cleaning page. • The toner cart ridge is defective. • The media is too smooth. • The fuser set ting is wrong for t he media type.* • The fusing assem bly is defective or dirty. • The printer d river is not set for the correct media. *This fea ture do es not[...]
-
Page 257
EN Image defect details 255 9 1200 serie s only • The reduction setting is set incorrectly. • The product cannot print to the edge o f the media. The product has minimum margins on each edge of 4.23 mm (0.17inch). 3100, 3150 , and 32 00 series o nly • The reduction setting is set incorrectly. • The product cannot print to the edge o f the m[...]
-
Page 258
256 Chapter 9 – Image quality EN • The media you are using does not meet HP paper specifications. • You are printing on the wrong side of the media. • The paper path is dirty. • The transfer roller is dirty. • The toner cart ridge is damaged or defective. • Print the cleaning page. • The media does not meet HP paper specifications. [...]
-
Page 259
EN Image defect details 257 9 1200 serie s only • The HP so ftware settings are s et to reduce the s canned image. – Adjust the settings in the HP Las erJet Director or HP Docum ent Manager. – Adjust the Quic k Copy settings. – Adjust the settings in the HP Las erJet Copier so ftware. 3100 and 3 150 ser ies only The JetSuite Pro software au[...]
-
Page 260
258 Chapter 9 – Image quality EN • The toner cart ridge is worn out. • If the toner smears appear on the l eading edge of the media, the media guides are dirty. • The media is too smooth. • The toner cart ridge needs to be replaced. • The printer needs t o be cleaned. • The fuser tem perature is too low.* *This fea ture do es not app [...]
-
Page 261
EN Image defect details 259 9 • The static eliminator t eeth are dirty. • There is poor contact between the static eliminator and the ECU. • The transfer roller is dirty or defective. • The ECU is defective. • The media does not meet HP specifications. • The toner cart ridge is empty or defective. • The fuser is defective or dirt y. ?[...]
-
Page 262
260 Chapter 9 – Image quality EN LJ 1200 series repetiti ve de fect rul er[...]
-
Page 263
EN LJ 1200 series repetitive defect ruler 261 9 Notes[...]
-
Page 264
262 Chapter 9 – Image quality EN LJ 2200 seri es repeti ti ve defect rul er[...]
-
Page 265
EN LJ 2200 series repetitive defect ruler 263 9 Notes[...]
-
Page 266
264 Chapter 9 – Image quality EN LJ 3100 and 3150 series repetit ive defect rule r[...]
-
Page 267
EN LJ 3100 and 3150 series repetitive defect ruler 265 9 Notes[...]
-
Page 268
266 Chapter 9 – Image quality EN LJ 3200 seri es repeti ti ve defect rul er[...]
-
Page 269
EN LJ 3200 series repetitive defect ruler 267 9 Notes[...]
-
Page 270
268 Chapter 9 – Image quality EN LJ 4100 seri es repeti ti ve defect rul er[...]
-
Page 271
EN LJ 4100 series repetitive defect ruler 269 9 Notes[...]
-
Page 272
270 Chapter 9 – Image quality EN[...]
-
Page 273
EN Chapter contents 271 10 Diag rams Chapter contents LJ 1200 series diagram and paper path ......................... ................. 272 LJ 1200 wiring diagram........................... ......................... ..... 272 LJ 1200 series paper path .................. .................................. 274 LJ 2200 series diagram and paper path ..[...]
-
Page 274
272 Chapter 10 – Diagrams EN LJ 1200 series diag ram and paper path LJ 1200 wiring diagram Figure 27 Wiring diagram (HP LaserJet 1200 series, 1 of 2)[...]
-
Page 275
EN LJ 1200 series diagram and paper path 273 4 LJ 1200 wiring diagram (continued) Figure 28 Wiring diagram (HP LaserJet 1200 series, 2 of 2)[...]
-
Page 276
274 Chapter 10 – Diagrams EN LJ 1200 series pape r path Figure 29 P aper path (HP Laser Jet 1200 series) Fusi ng exi t photos enso r T op of pa ge sensor[...]
-
Page 277
EN LJ 2200 series diagram and paper path 275 4 LJ 2200 series diag ram and paper path LJ 2200 wiring diagram Figure 30 Wiring diagram (HP LaserJet 2200 series, 1 of 2)[...]
-
Page 278
276 Chapter 10 – Diagrams EN LJ 2200 wiring diagram (continued) Figure 31 Ref e rence diagram (HP LaserJet 2200 series, 2 of 2)[...]
-
Page 279
EN LJ 2200 series diagram and paper path 277 4 LJ 2200 series pape r path Figure 32 P aper path (HP Laser Jet 2200 series) Deliver y sensor Re vers ed paper sensor Duplex p ickup se nsor T op of pa ge sens or[...]
-
Page 280
278 Chapter 10 – Diagrams EN LJ 3100 and 3150 series dia gram and paper path LJ 3100 and 3150 wiring dia gram Figure 33 Wiring diagram (HP LaserJet 3100/3150 series, 1 of 2)[...]
-
Page 281
EN LJ 3100 and 3150 series diagram and paper path 279 4 LJ 3100 and 3150 wiring dia gram (continued) Figure 34 Wiring diagram (HP LaserJet 3100/3150 series, 2 of 2)[...]
-
Page 282
280 Chapter 10 – Diagrams EN LJ 3100 and 3150 series paper path Figure 35 P aper path (HP Laser Jet 3100 and 3150 series) T op of pa ge sensor Deliver y sens or Pap e r to p sens or[...]
-
Page 283
EN LJ 3200 series diagram and paper path 281 4 LJ 3200 series diag ram and paper path LJ 3200 wiring diagram Figure 36 Wiring diagram (HP LaserJet 3200 series, 1 of 2)[...]
-
Page 284
282 Chapter 10 – Diagrams EN LJ 3200 wiring diagram (continued) Figure 37 Wiring diagram (HP LaserJet 3200 series, 2 of 2)[...]
-
Page 285
EN LJ 3200 series diagram and paper path 283 4 LJ 3200 series pape r path Figure 38 P aper path (HP Laser Jet 3200 series) T op of pa ge sensor Deliver y sens or Pap e r to p sens or[...]
-
Page 286
284 Chapter 10 – Diagrams EN LJ 4100 series diag ram and paper path LJ 4100 wiring diagram Figure 39 Wiring diagram (HP LaserJet 4100 series, 1 of 2)[...]
-
Page 287
EN LJ 4100 series diagram and paper path 285 4 LJ 4100 wiring diagram (continued) Figure 40 Wiring diagram (HP LaserJet 4100 series, 2 of 2)[...]
-
Page 288
286 Chapter 10 – Diagrams EN LJ 4100 series pape r path Figure 41 P aper path (HP Laser Jet 4100 series) T op of pa ge sens or Prefeed sens or Fuse r de li ve r y sens or Face down tray full sensor Re vers ed paper sensor[...]
-
Page 289
EN Chapter contents 287 11 Ser vices and suppor t: resources and training Chapter contents How to ge t trai ning ..... ....... .......... ......... ...... .......... ......... ...... ........... .. 288 Lecture and lab training (U.S. only) ...................................... 288 Self- p a ced tr aining kits ........ ......... .. ........ .. .....[...]
-
Page 290
288 Chapter 11 – Se rvices and support: resources and training EN How to g e t tr a in i ng Lecture and lab training (U .S. only) Serv ice technicians who want individual, hands -on training can attend regularly scheduled lecture/lab training classes. These classes are off ered throughout the country . T o receiv e the latest schedule, see the HP[...]
-
Page 291
EN Support resources 289 5 Suppor t resources HP direct or dering for genuine HP par ts Customer Ser vices and Suppor t Organiz ation (CSSO): • (1) (800) 227-8164 (U . S. only) • 1 (800) 387-3154 ( Canada only) Consumables Consumables and accessor ies can be ordered from Hewlett-P ac kard. The phone numbers are: U . S.: (1) (800) 538-8787 Canad[...]
-
Page 292
290 Chapter 11 – Se rvices and support: resources and training EN HP servic e parts informa tion compact disc This powerful, CD-ROM-based par ts information tool is designed to giv e users fast, easy access to parts information and recommended stocking lists f or a wide range of HP pr oducts. T o subscr ibe to this quar terly ser vice in the U .S[...]
-
Page 293
EN 291 A Acron yms and abbre viations Acron yms and abbrev iations AC Alternating c urrent AMP Amperes AU TO C O N T A utomatic cont in u e BNC A 10-Base 2 connector used with coaxial cables CE Customer engineer CFG Conf iguration on control panel CPU Central processing unit CSSO Customer Ser vices and Support Organization DC Direct current DCP S D[...]
-
Page 294
292 Ap pendix – EN EP Electro-photographic EPH External paper handling FIR F ast infrared receiver FR U Field replacement unit FTP File transf e r protocol HP ASA P Hewlett-P ackard A ut omat ed Suppor t Access Pr ogram HP F IRST He wlett-Pac k ard Fax inf or m ation retr iev al suppor t technology HP- GL/2 He wlett-P ackard graphics language HTM[...]
-
Page 295
EN 293 A LIU Line interf ace unit LV P S Low-v oltage power supply MB Megabyte MEM Memory MIO Modular input/out put MP PICKU P ROLLER Multipur pose tray pickup roll er MP T r ay Multipur pose tray MS-DO S Disk operating system MSDS Material safety data sheets NTSC Nat i onal T elevision Standard Committee NVR AM Non volatile r andom-access me mor y[...]
-
Page 296
294 Ap pendix – EN SMODE Service mode SPEC Specifications SR VR Server TCP/IP T ransm i ssion control protocol/Inter net protocol TS Thermoswitch UNI X ® Network operating system using TCP/IP protocol URL Univ ersal res ource locator V Vo l t VAC V olts alter nating current VDC V olts direct current Acr onym s and abbrev iations (continued)[...]
-
Page 297
EN Index 295 Numerics 79 errors LaserJet 2200 series 15 LaserJet 3200 series 82 LaserJet 4100 series 83 A abbreviations, defined 291 AC power distribution See also wiring diagrams LaserJet 1200 series 130 LaserJet 2200 series 132 LaserJet 3100/3150 series 133 LaserJet 3200 series 135 LaserJet 4100 series 137 accessories ordering 289 part numbers 17[...]
-
Page 298
296 Index EN battery failures 38 beam errors LaserJet 1200 series 12 LaserJet 2200 series 27 LaserJet 3100/3150, 3200, 4100 series 74 bidirectional communications error messages 54, 56 interface operations 142 testing 146 bins, error m essages 36, 53 black lines, troubleshooting horizontal 167, 252 vertical 258 black pages 246 black spots 256, 259 [...]
-
Page 299
EN Index 297 Inde x cleaning pages, cre ating LaserJet 1200 series 237 LaserJet 2200 series 238 LaserJet 3100/3150 series 239 LaserJet 3200 series 240 LaserJet 4100 series 241 processing time 58 cleaning spilled toner 173 clothing, toner on 173 cold reset LaserJet 1200 series 88 LaserJet 2200 series 96 LaserJet 3100/3150 series 104 LaserJet 3200 se[...]
-
Page 300
298 Index EN count, page defaults 90, 118 LaserJet 2200 series 94 LaserJet 4100 series 121 toner cartridges 166 country codes LaserJet 3100/3150 series 105 LaserJet 3200 series 112 cover grade paper, weight equivalence 153 cover open error m essages 56, 69 creases, troubleshooting 249 CSSO (Customer Serv ices and Support Organization) 289 curl enve[...]
-
Page 301
EN Index 299 Inde x paper 150 DIMMs flash, errors 44 LaserJet 1200 series errors 12 LaserJet 2200 series er rors 24, 30, 31 LaserJet 3100/3150, 3200, 4100 s eries errors 56, 76 part numbers 176 dirty pages 249 disk, EIO See also EIO cards error messages 39, 40 features 144 part number 178 display, test ing LaserJet 3100/3150 series 102 LaserJet 320[...]
-
Page 302
300 Index EN LaserJet 3100/3150, 3200, 4100 series 57 engine test, LaserJet 4100 series 126 envelope feeder error messages 34, 41 media specifications 151 part number 180 size specifications 159 envelopes feeding 160 gray background, troubleshooting 170 specifications 158 error messages accessory, LaserJet 2200 series 30 alphabetical list 33 contin[...]
-
Page 303
EN Index 301 Inde x no ans wer 42, 43, 49 no dial tone 50 page errors 42 phone number limits 55 polling 55 power failures 55 receiving 44, 59 sending 44 fax line tests, Las erJet 3100/3150 series 97 fax memory tests, Lase rJet 3100/ 3150 series 100 feeding problems, troubleshooting media 156 film, transparency. See transparencies FIR port. See fast[...]
-
Page 304
302 Index EN m essages 33, 35, 45, 67 H hard disk See also EIO cards error messages 39, 40 features 144 part number 178 Hardware Training Course 288 hardware, part numbers 188 heater, over-temperature protection (LaserJet 4100 series) 139 high-voltage power distribution LaserJet 2200 series 132 horizontal lines black 167, 252 white 253 HP authorize[...]
-
Page 305
EN Index 303 Inde x list 67 Extended Service menu 98 firmware, downloading 107 memory, c learing 104 model numbers 5 overcurrent/overvolt age protection 134 paper specifications 151 power distribution 133 recalibrating copier/scanner 108 repetitive defect ruler 264 reports 103 self-tests 100 Service menu 97 software, downloading 107 tests 102 train[...]
-
Page 306
304 Index EN I I/O card, expanded 144 I/O speed, set tings 142 image quality, troubleshooting banding 167 black lines 252, 258 black pages 246 blank pages 247, 248 bubbles 251 character voids 167, 248 characters, misformed 254 cleaning page, printing 236 curl 157, 249 cut-off p ages 248, 255 defect tables 243 density 251, 253, 254 dirty pages 249 d[...]
-
Page 307
EN Index 305 Inde x label, preventing 162 scanner 61 transparency, preventing 163 troubleshooting 67, 69 Jetdi rec t print serve r s part numbers 182 troubleshooting 146 JetSuite Pro s oftware 239 job retention, error messages 65 K keypad te sts failed, troubleshooting 47 LaserJet 3100/3150 series 102 LaserJet 3200 series 115 kits, maintenance inst[...]
-
Page 308
306 Index EN assemblies, major 206, 208, 212, 214, 216, 220, 222, 224, 226, 228 cleaning page, creating 239 country code softswitch 105 duty cycle 5 error messages, alphabetical list 33 error messages, numerical list 67 Extended Service menu, accessing 98 firmware, downloading 107 memory, c learing 104 model numbers 5 overcurrent/overvolt age prote[...]
-
Page 309
EN Index 307 Inde x training kits 288 wiring diagrams 284 LaserJet paper, HP 180 LaserJet Printer Family Print Media Guide 150 LCD tests LaserJet 3100/3150 series 102 LaserJet 3200 series 114 LEDs, control-panel. See lights, control-panel messages; lights, testi ng lengths, cables 147 letterhead 156 life expectancies, toner cartridges 166 light pri[...]
-
Page 310
308 Index EN media curl, t roubleshooting 157, 249 default size, s etting 90, 95, 118 envelope specifications 158 error messages 63, 65, 71 HP, ordering 180 jams. See jam s label specifications 161 long 47 paper specifications 151 rough 167, 168 sizes, standard 150, 159 special, lever for 37 training video 164 transparency specifications 163 troubl[...]
-
Page 311
EN Index 309 Inde x LaserJet 3100/3150, 3200, 4100 series 81 NVRAM initialization LaserJet 1200 series 88 LaserJet 2200 series 96 LaserJet 3200 series 116 LaserJet 4100 series 127, 128 NVRAM variables LaserJet 1200 series 89 LaserJet 3200 series 117 O OEM, default settings LaserJet 1200 series 90 LaserJet 3200 series 118 offline, error message 53 o[...]
-
Page 312
310 Index EN 227, 229 LaserJet 3200 series assemblies 219 LaserJet 4100 series assemblies 231 maintenance kits 182 service manuals 5 toner cartridges 180 training kits 288 parts CD-ROM, service information 290 LaserJet 1200 series 190 LaserJet 2200 series 196 LaserJet 3100/3150 series 206 LaserJet 3200 series 218 LaserJet 4100 series 230 ordering 2[...]
-
Page 313
EN Index 311 Inde x PRINTPAGECOUNT, default LaserJet 1200 series 90 LaserJet 3200 series 118 protocol trace, L aserJet 3100/ 3150 s eries 97, 103 Q quality, troubleshooting. See image quality, troubleshooting Quick Copy default settings 89 quick reference guides, ordering 4 R RAM errors disk 59 LaserJet 1200 series 13 LaserJet 2200 series 28, 29 La[...]
-
Page 314
312 Index EN S safety, toner 173 scan buffer errors LaserJet 1200 series 14 LaserJet 2200 series 29 scan motor errors, LaserJet 2200 series 27 scanned imag es, troubleshooting density 254 dots or streaks 256 size 257 text 257 scanner. See copier/scanner; laser/scanner SCANPAGECOUNT , default LaserJet 1200 series 90 LaserJet 3200 series 118 scattere[...]
-
Page 315
EN Index 313 Inde x envelopes 159 paper 150 skewed print 257 skin contact, toner 173 smears. S ee lines, troubleshooting smoothness envelope specifications 158 image quality pr oblems 167, 168 paper specifications 152 smudges 253 softswitches country code 105 resetting 104 software, downloading 107, 289 solenoids. See wiring diagrams special-media [...]
-
Page 316
314 Index EN support 290 temperature fuser protection circuit, LaserJet 4100 series 139 fusing compatibility, media specifications 152 terminology 291 tests communications 146 LaserJet 3100/3150 series 97, 100, 102 LaserJet 3200 series 111, 113 text grade paper, weight equivalence 152 text, troubleshooting character voids 167, 248 dropouts 250 misf[...]
-
Page 317
EN Index 315 Inde x quality, troubleshooting jams 67, 69 See also jams Jetdirect print s ervers 146 media 156 repetitive defects 256, 260 self-test failures, LaserJet 3100/ 3150 series 100 tests . See tests toner, spilled 173 two-way communications error messages 54, 56 interface operations 142 testing 146 U USB cables interface 142 length, maximum[...]
-
Page 318
316 – Index EN[...]
-
Page 319
[...]
-
Page 320
*5961-0953* *5961-0953* 5 9 61-09 5 3 copy right © 2001 Hew let t-P a ck ard Com pany www .hp .com/suppor t/laser jet Supported Products hp Las erJet 1200/1200N/1200SE prin ters 12 20/1220SE 2 200D/2200D T/2 200DN/2 200D TN/2 200DSE Las erJet 3100 Las erJet 315 0 Las erJet 3 200/3 200M/3 200SE Las erJet 4100/4100N/4100TN/4100D TN hp hp hp hp hp hp[...]