Go to page of
Similar user manuals
-
Laptop
HP (Hewlett-Packard) nx6110
201 pages 3.68 mb -
Laptop
HP (Hewlett-Packard) F2R99UT#ABA
175 pages 5.26 mb -
Laptop
HP (Hewlett-Packard) 1100
127 pages 5.68 mb -
Laptop
HP (Hewlett-Packard) E8B16UA#ABA
89 pages 3.04 mb -
Laptop
HP (Hewlett-Packard) nc6400
256 pages 4.5 mb -
Laptop
HP (Hewlett-Packard) g6-2237us
75 pages 2.78 mb -
Laptop
HP (Hewlett-Packard) presario 1100
188 pages 9.34 mb -
Laptop
HP (Hewlett-Packard) nx6310
28 pages 0.25 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of HP (Hewlett-Packard) nc6110, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of HP (Hewlett-Packard) nc6110 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of HP (Hewlett-Packard) nc6110. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of HP (Hewlett-Packard) nc6110 should contain:
- informations concerning technical data of HP (Hewlett-Packard) nc6110
- name of the manufacturer and a year of construction of the HP (Hewlett-Packard) nc6110 item
- rules of operation, control and maintenance of the HP (Hewlett-Packard) nc6110 item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of HP (Hewlett-Packard) nc6110 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of HP (Hewlett-Packard) nc6110, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the HP (Hewlett-Packard) service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of HP (Hewlett-Packard) nc6110.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the HP (Hewlett-Packard) nc6110 item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Main tenan ce and Ser vice Gu id e HP C ompaq nx6110/nc6110 and nx6120/nc6120 Notebook P Cs Doc ument P art Number: 3 7 31 4 6 -001 F ebr uary 2005 This guide is a troubleshooting reference used for maintaining and servicing the notebook. It provides comprehensi v e information on identifying notebook features, components, and spare parts; troubles[...]
-
Page 2
© Copyright 2005 He wlett-Packard De v elopment Company , L.P . Microsoft and W indo ws are U.S. re gistered trademarks of Microsoft Corporation. Intel, Pentium, and Celeron are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Bluetooth is a trademark owned b y its proprietor an[...]
-
Page 3
Maintenance and Serv ice Guide iii Cont ents 1 Product Description 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Resetting the Notebook . . . . . . . . . . . . . . . . . . . . . . . 1–4 1.3 Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5 1.4 External Components . . . . . . [...]
-
Page 4
iv Maintenance and Servi ce Guide Cont ent s 5 Removal and Replacement Procedures 5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2 5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–3 5.3 Preparing the Notebook for Di sassembly . . . . . . . . . 5–5 5.4 Notebook Feet . . . . . . . . . . . . .[...]
-
Page 5
Maintenance and Serv ice Guide 1–1 1 Product D esc ription The HP Compaq nx6110/nc6110 and nx6120/nc6120 Notebook PCs of fer adv anced modularity , Intel® Pentium® M and Celeron® processors, and extensi ve multimedia support. HP Compaq nx6110/nc6110 and nx6120/nc6120 Notebook PCs[...]
-
Page 6
1–2 Maintenance and Service Guide Produc t D esc ripti on 1.1 F e a t u r e s ■ The follo wing processors are av ailable, v arying by notebook model: ❏ Intel Pentium M 2.13-, 2.00-, 1.86-, 1.73-, 1.60-, or 1.30-GHz processor , ❏ Intel Celeron 1.5- or 1.4-GHz ■ The follo wing displays are available, v arying by notebook model: ❏ 15.0-inc[...]
-
Page 7
Pr oduct Descr iption Maintenance and Serv ice Guide 1–3 ■ External 65-watt A C adapter with 3-wire po wer cord, varying by notebook model ■ 6-cell Li-Ion battery pack ■ Stereo speakers ■ V olume up, volume mute, and v olume down b uttons (full-featured models only) ✎ Numerous references are made throughout this Maintenance and Service [...]
-
Page 8
1–4 Maintenance and Service Guide Produc t D esc ripti on ■ Connectors: ❏ Audio-out (headphone) ❏ Audio-in (microphone) ❏ Uni versal Serial Bus (USB) v . 2.0 (4 ports on full-featured notebook models, 2 ports on defeatured notebook models) ❏ Po wer ❏ External monitor ❏ RJ-11 (modem) ❏ RJ-45 (network) ❏ IEEE 1394 ❏ T rav el bat[...]
-
Page 9
Pr oduct Descr iption Maintenance and Serv ice Guide 1–5 3. W ait approximately 5 minutes. 4. Replace the R TC battery and reassemble the notebook. 5. Connect A C power to the notebook. Do not reinsert an y battery packs at this time. 6. T urn on the notebook. All passwords and all CMOS settings ha ve been cleared. 1. 3 P o w e r M a n a g e m e [...]
-
Page 10
1–6 Maintenance and Service Guide Produc t D esc ripti on 1 .4 Exter nal C ompon ents The external components on the front of the notebook are sho wn belo w and described in T able 1-1. F ront Components Ta b l e 1 - 1 Front Components Item Component Function 1 Infrared por t (full-fe atured models only) Provides wireless communication betw een t[...]
-
Page 11
Pr oduct Descr iption Maintenance and Serv ice Guide 1–7 4 Wireless light On: an integrated wire less de vice has been enabled. 5 P ower/standb y light ■ Green: The notebook is on. ■ Blinking green: The notebook is in standby mode . ■ Off: The notebook is off or in hibernation. 6 Batter y light ■ Amber : A battery pack is charging. ■ Gr[...]
-
Page 12
1–8 Maintenance and Service Guide Produc t D esc ripti on The external components on the right side of the notebook are sho w n belo w and described in T able 1-2. R ight-Side C omponents[...]
-
Page 13
Pr oduct Descr iption Maintenance and Serv ice Guide 1–9 Ta b l e 1 - 2 Right-Side Components Item Component Function 1 A udio-out (headphone) jack Connect optional head phones or powe red stereo speakers . Also connects the audio function of an audio/v ideo de vice such as a tele vision or VCR. 2 A udio-in (microphone) jack Connects an optional [...]
-
Page 14
1–10 Maintenance and Serv ice Guide Produc t D esc ripti on The external components on the left side of the notebook are sho w n belo w and described in T able 1-3. Lef t -Sid e Comp on en ts Ta b l e 1 - 3 Left-Side Components Item Component Function 1 USB por ts (2) Connect USB 1.1- and 2.0-compliant de vices to the notebook using a standard US[...]
-
Page 15
Pr oduct Descr iption Maintenance and Serv ice Guide 1–11 3 Exhaust vent Provides airflo w to cool inter nal components. Ä T o pre vent ov erheating, do not obstruct vents. Do not allow a hard surf ace, such as a printer, or a soft surf ace, such as pillows, thic k r ugs, or clothing, to bloc k airflow . 4 RJ-11 (modem) jack Connects the modem c[...]
-
Page 16
1–12 Maintenance and Serv ice Guide Produc t D esc ripti on The external components on the rear panel of the notebook are sho w n belo w and described in T able 1-4. Rea r P a n e l Co mp o n en t s[...]
-
Page 17
Pr oduct Descr iption Maintenance and Serv ice Guide 1–13 T able 1-4 Rear P anel Components Item Component Function 1 Security cable slot Attaches an optional security cable to the notebook. Ä Security solutions are designed to act as deterrents. These deterrents ma y not pre vent a product from being mishandled or stolen. 2 Batter y ba y Holds [...]
-
Page 18
1–14 Maintenance and Serv ice Guide Produc t D esc ripti on The standard ke yboard components of the notebook are sho wn belo w and described in T able 1-5. Standar d K ey board Components[...]
-
Page 19
Pr oduct Descr iption Maintenance and Serv ice Guide 1–15 T able 1-5 Standard K eyboar d Components Item Component Function 1 f1 to f12 keys ( 12 ) P erform system and application tasks. When combined with the fn key , s ever al ke ys and buttons perf orm additional tasks as hotke ys. 2 caps lock key Enables caps loc k and tur ns on the caps lock[...]
-
Page 20
1–16 Maintenance and Serv ice Guide Produc t D esc ripti on The notebook top components are sho wn below and described in T able 1-6. T op Components , P art 1 T able 1-6 T op Components, Part 1 Item Component Function 1 P ower/standb y button When the notebook is: ■ Off , press to tur n on the notebook. ■ On, briefly press to initiate hiber [...]
-
Page 21
Pr oduct Descr iption Maintenance and Serv ice Guide 1–17 2 Displa y lid switch ■ If the notebook is closed while on, turns off the displa y . ■ If the notebook is opened while in standby , turns on the notebook (resumes from standby). 3 Inf o Center button (full-fe atured models only) Launches Inf o Center . 4 Wireless button T urns the wire[...]
-
Page 22
1–18 Maintenance and Serv ice Guide Produc t D esc ripti on The notebook top components are continued belo w and described in T able 1-7. T op Components , P art 2[...]
-
Page 23
Pr oduct Descr iption Maintenance and Serv ice Guide 1–19 T able 1-7 T op Components, Part 2 Item Component Function 1 V olume mute bu tton (full-fe atured models only) Mutes or restores system volume . 2 V olume down b u tton (full-fe atured models only) Decreases system vo lume. 3 V olume up button (full-fe atured models only) Increases system [...]
-
Page 24
1–20 Maintenance and Serv ice Guide Produc t D esc ripti on The external components on the bottom of the notebook are sho w n belo w and described in T able 1-8. Bottom Components Ta b l e 1 - 8 Bottom Components Item Component Function 1 Primar y batter y bay Holds the pr imar y batter y pack. 2 Primar y batter y locking latch Secures the primar[...]
-
Page 25
Pr oduct Descr iption Maintenance and Serv ice Guide 1–21 4 Memor y module compar tment Mini PCI compar tment Contains 2 memor y slots that suppor t replaceable memory modules. The number of preinstalled memory modules varies b y notebook model. Holds an optional wireless LAN de vice. Ä T o pre vent an unresponsive system and the displa y of a w[...]
-
Page 26
1–2 2 Maintenance and Servi ce Guide Produc t D esc ripti on 1. 5 D e s i g n O v e r v i e w This section presents a design ov erview of ke y parts and features of the notebook. Refer to Chapter 3, “Illustrated Parts Catalog, ” to identify replacement parts, and Chapter 5, “Remov al and Replacement Procedures, ” for disassembly steps. Th[...]
-
Page 27
Maintenance and Serv ice Guide 2–1 2 T roubleshooting Å W ARNI NG: Only author iz ed technic ians trained b y HP should repair this equipment . All tr oubleshooting and repair pr ocedure s are detailed to allo w only subasse mbly-/module -lev el re pair . Because of the comple xity of the indiv idual boar ds and subassemblie s, do not attempt to[...]
-
Page 28
2–2 Maintenance and Service Guide T roubleshooting 2. Select the Main , Security , Advanced , or T ools menu. 3. T o close Computer Setup and restart the notebook: ❏ Select Exit > Exit Sa ving Changes , and then press enter . — or — ❏ Select Exit > Exit Discarding Changes , and then press enter . — or — ❏ Select Exit > Load[...]
-
Page 29
T roubleshooting Maintenance and Serv ice Guide 2–3 Selectin g from the Securit y Menu Ta b l e 2 - 2 Security Menu Select T o Do This Administrator P ass word Enter , change, or delete an Administrator pass word. P owe r-o n Password Enter , change, or delete a pow er-on password. DriveLock P a ss words Enable/disab le Dr iveLoc k; change a Driv[...]
-
Page 30
2–4 Maintenance and Service Guide T roubleshooting Selec ting from the Adv anced Menu Selectin g from the T ools Menu Ta b l e 2 - 3 Adv anced Menu Select T o Do This Language Change the Computer Setup language. Boot Order Enable/disab le MultiBoot, which sets a star tup sequence that can includ e most bootab le de vices and media in the system. [...]
-
Page 31
T roubleshooting Maintenance and Serv ice Guide 2–5 2.2 T roubleshootin g Flo wc har ts Ta b l e 2 - 5 T roubleshooting Flo wchar ts Overview Flowchart Description 2.1 “Flowchart 2.1—Initial T roubleshooting” 2.2 “Flowchart 2.2—No Po wer , P a r t 1” 2.3 “Flowchart 2.3—No Po wer , P a r t 2” 2.4 “Flowchart 2.4—No Po wer , P [...]
-
Page 32
2–6 Maintenance and Service Guide T roubleshooting Flowchart Description 2.14 “Flowchart 2.14—No OS Loading, Optical Dr ive” 2.15 “Flowchart 2.15—No Audio , P ar t 1” 2.16 “Flowchart 2.16—No Audio , P ar t 2” 2.17 “Flowchart 2.17—Nonfunctioning Device” 2.18 “Flowchart 2.18—Nonfunctioning Ke yboard” 2.19 “Flowchart [...]
-
Page 33
T roubleshooting Maintenance and Serv ice Guide 2–7 Flo wc har t 2. 1—Initial T roubl eshooting Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages? Keyboard/ pointing device working? Go to “Flowchart 2.17—Nonfunction ing Device . [...]
-
Page 34
2–8 Maintenance and Service Guide T roubleshooting Flo wc har t 2.2—No P ow er , P art 1 1. Reset the power cables in the docking device and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working. Done Remove from docking device (if applicable). Pow e r u p on batter y power? Po we r u p on AC power[...]
-
Page 35
T roubleshooting Maintenance and Serv ice Guide 2–9 Flo wc har t 2.3—No P ow er , Part 2 Continued from “Flowchart 2.2—No P ower , Pa r t 1 . ” Visually check for debris in batter y socket and clean if necessary . Done N Y Po we r o n? Check battery by recharging it, moving it to another notebook, or replacing it. Pow e r o n? Done Y Repl[...]
-
Page 36
2–10 Maintenance and Serv ice Guide T roubleshooting Flo wc har t 2.4—No P ow er , P art 3 Continued from “Flowchart 2.3—No P ower , Pa r t 2 . ” Reseat AC adapter in notebook and at pow er sou rce. Internal or external AC adapter? Done Done Done Done Po we r o n? Pow e r o n? Po we r o n? Plug directly into AC outlet. Po we r L ED on? Po[...]
-
Page 37
T roubleshooting Maintenance and Serv ice Guide 2–11 Flowc ha r t 2.5— No P ow er , P a rt 4 Y N Continued from “Flowchart 2.4—No P ower , Pa r t 3 . ” Reseat loose components and boards and replace damaged items. Open notebook. Loose or damaged parts? Y Close notebook and retest. Pow er on ? Done N Replace the following items (if applica[...]
-
Page 38
2–12 Maintenance and Serv ice Guide T roubleshooting Flo wc har t 2.6—No Vid eo, P art 1 A N Stand-alone or docking device? No video. Replace the following one at a time. T est after each replacement. 1. Cable between notebook and notebook display (if applicable) 2. Display 3. System board Internal or external display*? Adjust brightness. Video[...]
-
Page 39
T roubleshooting Maintenance and Serv ice Guide 2–13 Flo wc har t 2.7—No Vid eo, P art 2 Y N Continued from “Flowchart 2.6—No Video , Pa r t 1 . ” Done Adjust external monitor display . Video OK? Adjust display brightness. Video OK? Video OK? Done Done Check that notebook is properly seated in docking device, for bent pins on cable, and f[...]
-
Page 40
2–14 Maintenance and Serv ice Guide T roubleshooting F lo wcha rt 2 .8— No nf unct io ni ng D ock in g De vi ce (if applicable) Y N Reset power cord in docking device and power outlet. N Replace the following docking device components one at a time. Check notebook operation after each replacement. 1. Power supply 2. I/O board 3. Backplane board[...]
-
Page 41
T roubleshooting Maintenance and Serv ice Guide 2–15 Flo wc har t 2.9—No O peratin g S ystem (OS) Loading No OS loading from hard drive, go to “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reset power cord in docking device and power outlet. No OS loading.* *NOTE: Before beginning troubleshooting, always check cable connections, [...]
-
Page 42
2–16 Maintenance and Serv ice Guide T roubleshooting Flowch ar t 2. 1 0— No OS Lo ad in g , H ard Drive, Pa r t 1 Go to “Flowchart 2.17—Nonfunctioning Device . ” Y Done N OS not loading from hard drive. Nonsystem disk message? Go to “Flowchart 2.11—No OS Loading, Hard Drive, P ar t 2. ” Reseat external hard drive. OS loading? Done B[...]
-
Page 43
T roubleshooting Maintenance and Serv ice Guide 2–17 Flowc ha r t 2. 1 1—No OS L oa din g , Ha rd Driv e, Pa r t 2 Load OS using Operating System disc (if applicable). Continued from “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat hard drive. Done CD or diskette in drive? 1. Replace hard drive. 2. Replace system board. Go to[...]
-
Page 44
2–18 Maintenance and Serv ice Guide T roubleshooting Flowc ha r t 2. 1 2—N o OS Loa d in g , H ard Driv e, Pa r t 3 Y System files on hard drive? Continued from “Flowchart 2.11—No OS Loading, Hard Drive, P ar t 2. ” Clean virus. Done N Install OS and reboot. Virus on hard drive? OS loading from hard drive? Y N Y N Y N Diagnostics on diske[...]
-
Page 45
T roubleshooting Maintenance and Serv ice Guide 2–19 Flo wc har t 2. 1 3—No OS Loadin g, Disk et te Drive Done Y N Reseat diskette drive. OS not loading from diskette drive. Done Y Y Y Y Y Y Y N N N N N N N OS loading? Nonsystem disk message? Bootable diskette in drive? Install bootable diskette and reboot notebook. Check diskette for system fi[...]
-
Page 46
2–20 Maintenance and Serv ice Guide T roubleshooting Flo wc har t 2. 1 4—No OS Loadin g , Opti cal Driv e Y Done N Bootable disc in drive? Disc in drive? No OS loading from CD-ROM or DVD-ROM drive. Install bootable disc and reboot notebook. Go to “Flowchart 2.17—Nonfunctioning Device . ” Go to “Flowchart 2.17—Nonfunctioning Device . ?[...]
-
Page 47
T roubleshooting Maintenance and Serv ice Guide 2–21 Flo wc h art 2. 1 5—No Au dio, P ar t 1 No audio. N Notebook in docking device (if applicable)? Internal audio? Audio? Done Undock Audio? Done T urn up audio internally or externally . Go to “Flowchart 2.16—No Audio , Pa r t 2 . ” Go to “Flowchar t 2.17—Nonfunctioning De vice. ” R[...]
-
Page 48
2–2 2 Maintenance and Servi ce Guide T roubleshooting Flo wc har t 2. 1 6—No Audio, P ar t 2 YN Continued from “Flowchart 2.15—No Audio , Pa r t 1 . ” Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for application? Connect to external speaker . Load drivers and set configuration in OS. Audio? Done [...]
-
Page 49
T roubleshooting Maintenance and Serv ice Guide 2 –2 3 Flo wc har t 2. 1 7—Nonfun c tioning Dev i ce Done Any physical device detected? Y N Unplug the nonfunctioning device from the notebook and inspect cables and plugs for bent or broken pins or other damage. Reseat device. Clear CMOS. Done Fix o r replace broken item. Nonfunctioning device. R[...]
-
Page 50
2–2 4 Maintenance and Servi ce Guide T roubleshooting Flo wc har t 2. 1 8—Nonfunc tioning K ey board Y N OK? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external keyboard. Reseat internal keyboard connector (if applicable). Replace internal keyboard or cable. OK? [...]
-
Page 51
T roubleshooting Maintenance and Serv ice Guide 2–25 Flo wc har t 2. 1 9—N onfunc tioning P oin ting De vice Y N OK? Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external pointing device. Reseat internal pointing device connector (if applicable). Replace int[...]
-
Page 52
2–2 6 Maintenance and Servi ce Guide T roubleshooting Flo wc har t 2.20—No Net w ork/Modem Conne c tion Y Disconnect all power from the notebook and open. No network or modem connection. N Done Digital line? Network or modem jack active? Replace jack or have jack activated. Connect to nondigital line. NIC/modem configured in OS? Reload drivers [...]
-
Page 53
Maintenance and Serv ice Guide 3–1 3 I llustra ted P ar ts C a talog This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers. 3. 1 Serial N umber Location When ordering parts or requesting information, provide the notebook serial number and model number located on the bottom of the notebook. Seri a l Number Lo[...]
-
Page 54
3–2 Maintenance and Service Guide Illustrated P art s Catalog 3.2 Notebook Major C ompon ents Notebook Major C omponents[...]
-
Page 55
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–3 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components Item Description Spare P ar t Number 1 Display assemb lies (include wireless antenna boards and cables) 15.0-inch, SXGA+WV A, TFT 15.0-inch, XGA, TFT 14.1-inch, XGA, TFT 378210-001 378209-001 378208-001 2 Switch co vers F or use[...]
-
Page 56
3–4 Maintenance and Service Guide Illustrated P art s Catalog Notebook Major C omponents[...]
-
Page 57
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–5 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components (Continued) Item Description Spare P ar t Number 7 Processor s (include thermal paste) Intel P entium M 2.13-GHz Intel P entium M 2.00-GHz Intel P entium M 1.86-GHz Intel P entium M 1.73-GHz Intel P entium M 1.60-GHz Intel P ent[...]
-
Page 58
3–6 Maintenance and Service Guide Illustrated P art s Catalog Notebook Major C omponents[...]
-
Page 59
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–7 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components (Continued) Item Description Spare P ar t Number 13 USB/audio board (f or use only with full-featured models; includes audio board cable , and USB board cable) A udio board (for use only with def eatured models; includes audio b[...]
-
Page 60
3–8 Maintenance and Service Guide Illustrated P art s Catalog Notebook Major C omponents[...]
-
Page 61
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–9 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components (Continued) Item Description Spare P ar t Number 18 Mini PCI communications car ds 802.11b/g WLAN card, fo r use in MO W 802.11b/g WLAN card, fo r use in the ROW 381582-001 381583-001 802.11b/g combination WLAN card, f or use in[...]
-
Page 62
3–10 Maintenance and Serv ice Guide Illustrated P art s Catalog Notebook Major C omponents[...]
-
Page 63
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–11 Ta b l e 3 - 1 Spare P ar ts: Notebook Major Components (Continued) Item Description Spare P ar t Number 20 Optical drives (include bezel) 24X Max CD-ROM driv e 8X Max D VD-ROM drive 4X Max D VD±RW and CD-R W Combo Dr ive D VD/CD-RW Combo Drive 8X Max D VD±RW and CD-R W Combo Dr i[...]
-
Page 64
3–12 Maintenance and Serv ice Guide Illustrated P art s Catalog 3. 3 Miscell an eous P l as tic s Kit T able 3-2 Spare P ar t Number 378236-001 Item Description 1 Memor y module/Mini PC I compar tment cov er (includes 1 captive scre w) 2 Hard drive cov er (includes 2 captive scre ws) 3 R TC batter y 4 Notebook fe et (4) 5 PC Card slot space sav e[...]
-
Page 65
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–13 3.4 Miscell aneous C ab le Kit Ta b l e 3 - 3 Spare P ar t Number 381709-001 Item Description 1 Bluetooth board cable 2 LED board cable 3 RJ-11 connector module and cable 4 A udio board cable 5 USB board cable 6 Serial connector module cable[...]
-
Page 66
3–14 Maintenance and Serv ice Guide Illustrated P art s Catalog 3.5 Ma s s St or a g e D evices Ta b l e 3 - 4 Spare P ar t Number Information Item Description Spare P ar t Number 1 Hard drives (include frame and connector) 5400-rpm 80-GB 60-GB 40-GB 380108-001 378215-001 380107-001 4200-r pm 80-GB 60-GB 30-GB 378214-001 378213-001 378211-001 2 O[...]
-
Page 67
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–15 3.6 Miscell aneous (N ot I llustra ted) Ta b l e 3 - 5 Spare P ar t Information Description Spare P ar t Number 65 watt A C adapter 239704-001 HP Adv anced Docking Station 374804-001 HP Docking Station 374803-001 Docking Station Miscellaneous Plastics Kit 380089-001 Carrying cases N[...]
-
Page 68
3–16 Maintenance and Serv ice Guide Illustrated P art s Catalog Screw Kit (includes the f ollowing screws; ref er to Appendix C, “Screw Listing,” f or more inf ormation on specifications and usage 378235-001 ■ He x sock et HM5.0×9.0 screw lock ■ Phillips PM2.5×13.0 spring-loaded screw ■ Phillips PM2.5×4.0 shoulder screw ■ Phillips [...]
-
Page 69
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–17 Pow e r c o rd s Fo r u s e i n : A u stralia and Ne w Zealand 246959-011 Belgium, Europe, Finland, F rance, Ger many , Greece, the Netherlands, Norwa y , Po r tugal, Spain, and Sweden 246959-021 Brazil 246959-201 Canada, F rench Canada, Latin America, T aiwan, Thailand, and the Uni[...]
-
Page 70
3–18 Maintenance and Serv ice Guide Illustrated P art s Catalog 3.7 Sequen tial P ar t Number Lis ting Ta b l e 3 - 6 Sequential P ar t Number Listing Spare P ar t Number Description 239704-001 65-watt A C adapter 246959-001 P ower cord f or use in Canada, F rench Canada, Latin Amer ica, T aiwan, Thailand, and the United States 246959-011 P ower [...]
-
Page 71
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–19 336579-001 1024-MB memor y module, 400-MHz DDR2 359118-001 USB 1.1 diskette driv e 364602-001 6-cell, 2.2-AHr battery pack 366143-001 External MultiBay cradle 366144-001 External MultiBay cradle po wer cable and stand 366577-001 256-MB memor y module, 400-MHz DDR2 367456-001 8-cell [...]
-
Page 72
3–20 Maintenance and Serv ice Guide Illustrated P art s Catalog 373900-001 802.11a/b/g combination WLAN card Mini PCI communications card f or use in MOW 373900-021 802.11a/b/g combination WLAN Mini PCI communications card f or use Europe, Middle East, and Africa 373900-291 802.11a/b/g combination WLAN Mini PCI communications card f or use Japan [...]
-
Page 73
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3–21 378217-001 Intel Celeron 1.4-GHz processo r , includes ther mal paste 378218-001 Intel Celeron 1.5-GHz processo r , includes ther mal paste 378219-001 Intel P entium M 1.30-GHz proces sor , includes ther mal paste 378220-001 Intel P entium M 1.60-GHz proces sor , includes ther mal p[...]
-
Page 74
3–2 2 Maintenance and Servi ce Guide Illustrated P art s Catalog 378236-001 Miscellaneous Plastics Kit 378237-001 Speaker 378238-001 System board, f or use only wi th def eatured models (GML) 378239-001 T op cov er , includes T ouchPad, f or use only with def eatured models 378240-001 Base enclosure, f or use only with defeatured models 378241-00[...]
-
Page 75
Illustr ated P ar ts Catalog Maintenance and Serv ice Guide 3 –2 3 378248-131 K eyboard f or use in P or tugal 378248-141 K eyboard f or use in T ur ke y 378248-151 K eyboard f or use in Greece 378248-161 K eyboard f or use in Latin Amer ica 378248-171 K eyboard f or use in Saudi Arabia 378248-181 K eyboard f or use in Belgium 378248-201 K eyboar[...]
-
Page 76
3–2 4 Maintenance and Servi ce Guide Illustrated P art s Catalog 380770-001 8X Max D VD-ROM drive, includes bezel 380771-001 4X Max D VD±RW and CD-R W Combo Dr ive , includes bezel 380772-001 D VD/CD-RW Combo Drive , includes bezel 380773-001 8X Max D VD±RW and CD-R W Combo Dr ive , includes bezel 380774-001 Modem board 381582-001 802.11b/g WLA[...]
-
Page 77
Maintenance and Serv ice Guide 4–1 4 Remo v al an d Repl acem ent Preliminaries This chapter provides essential information for proper and safe remov al and replacement service. 4. 1 T ools Required Y ou will need the follo wing tools to complete the remov al and replacement procedures: ■ Magnetic dri ver ■ Phillips P0 dri ver ■ 5.0-mm sock[...]
-
Page 78
4–2 Maintenance and Service Guide Remo val and R eplacement Preliminar ies 4.2 Ser vice Consi dera tions The follo wing sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. ✎ As you remov e each subassembly from the notebook, place the subassembly (and all accompanying scre ws) awa[...]
-
Page 79
Remo val and Replace ment Preliminar ies Maintenance and Serv ice Guide 4–3 4. 3 Pr e v enti ng Damage to Re mo v able Driv es Remov able driv es are fragile components that must be handled with care. T o prev ent damage to the notebook, damage to a remov able driv e, or loss of information, observe the follo wing precautions: ■ Before removing[...]
-
Page 80
4–4 Maintenance and Service Guide Remo val and R eplacement Preliminar ies 4.4 Pre v entin g Elec trostati c Dam ag e Many electronic components are sensiti ve to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensiti vity . Networks built into many inte grated circuits provide some protection, b ut in many [...]
-
Page 81
Remo val and Replace ment Preliminar ies Maintenance and Serv ice Guide 4–5 4.5 P ac k a ging an d T ranspor ting Precautions Use the follo wing grounding precautions when packaging and transporting equipment: ■ T o av oid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. ■ Protect all electrostatic-se[...]
-
Page 82
4–6 Maintenance and Service Guide Remo val and R eplacement Preliminar ies 4.6 W orks tation Precau tions Use the follo wing grounding precautions at workstations: ■ Cov er the workstation with approved static-shielding material (refer to T able 4-2, “Static-Shielding Materials” ). ■ Use a wrist strap connected to a properly grounded work[...]
-
Page 83
Remo val and Replace ment Preliminar ies Maintenance and Serv ice Guide 4–7 ■ When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conducti ve floors or dissipativ e floor mats, use foot straps on both feet w[...]
-
Page 84
4–8 Maintenance and Service Guide Remo val and R eplacement Preliminar ies T able 4-1 shows ho w humidity affects the electrostatic v oltage le vels generated by dif ferent activities. T able 4-2 lists the shielding protection provided by antistatic bags and floor mats. Ta b l e 4 - 1 T ypical Electrostatic V oltage Le vels Relative Humidity Even[...]
-
Page 85
Maintenance and Serv ice Guide 5–1 5 Remo v al an d Repl acem ent Procedur es This chapter provides remo val and replacement procedures. There are 62 scre ws and screw locks, in 11 dif ferent sizes, that must be remov ed, replaced, or loosened when servicing the notebook. Make special note of each scre w and screw lock size and location during re[...]
-
Page 86
5–2 Maintenance and Service Guide Remo val and R eplacement Procedur es 5 . 1 Serial N umber Report the notebook serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the notebook. Seri a l Number Location[...]
-
Page 87
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–3 5 .2 Disassem bl y Seque nce Ch art Use the chart belo w to determine the section number to be referenced when removing notebook components. Disassembl y Sequence Char t Section Description # of Screws Remo ved 5.3 Preparing the notebook for disassembly Batter y pack Hard dr[...]
-
Page 88
5–4 Maintenance and Service Guide Remo val and R eplacement Procedur es Section Description # of Screws Remo ved 5.9 Key b o a r d 2 5.10 Switch cov er 2 5.11 LED board 4 5.12 Fa n 2 loosened 5.13 Heat sink 4 loosened 5.14 Processor 1 loosened 5.15 Modem board 2 5.16 Internal memor y module 0 5.17 R TC batter y 0 5.18 Displa y assembly 6 5.19 T o[...]
-
Page 89
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–5 5 .3 Preparing th e Notebook for Disasse mbl y Before you begin an y remova l or installation procedures: 1. Shut do wn the notebook. If you are unsure whether the notebook is of f or in hibernation, turn the computer on, and then shut it do wn through the operating system. [...]
-
Page 90
5–6 Maintenance and Service Guide Remo val and R eplacement Procedur es b . Slide and hold the battery pack lock latch 1 to the right. c. Slide the battery pack release latch 2 to the right. (The battery pack disengages from the notebook.) d. Slide the battery pack straight back 3 and remov e it. Re mo v i ng the Battery P ack Re verse the abo ve[...]
-
Page 91
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–7 5. Remov e the hard driv e by follo wing these steps: a. Loosen the 2 PM2.0×4.0 scre ws 1 that secure the hard dri ve co ver to the notebook. b . Lift the left side of the hard dri ve cov er and swing it to the right 2 . c. Remov e the hard driv e cov er . ✎ The hard dri [...]
-
Page 92
5–8 Maintenance and Service Guide Remo val and R eplacement Procedur es d. Loosen the PM2.5×13.0 spring-loaded hard dri ve retention scre w 1 . e. Grasp the mylar tab 2 on the left side of the hard dri ve and slide the hard dri ve to the right 3 to disconnect it from the system board. f. Remov e the hard driv e from the hard dri ve bay 4 . Re mo[...]
-
Page 93
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–9 g. Remov e the 2 PM2.5×4.0 hard driv e frame shoulder scre ws 1 from each side of the hard drive. h. Remov e the 2 PM2.5×4.0 hard driv e frame scre ws 2 from each side of the hard dri ve. i. Remov e the 2 PM1.5×3.5 hard driv e frame screws 3 from the front of the hard dri[...]
-
Page 94
5–10 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 5 .4 Notebook F eet The notebook feet are adhesi ve-backed rubber pads. The feet are included in the Miscellaneous Plastics Kit, spare part number 378236-001. Replac ing the Notebook F eet[...]
-
Page 95
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–11 5 .5 Bluetooth B oard 1. Prepare the notebook for disassembly (refer to Section 5.3 ). 2. Slide the Bluetooth board out of the clip 1 in the hard dri ve compartment. 3. Disconnect the Bluetooth board cable 2 from the board. Remo ving the Bluet ooth Board Re verse the abo ve[...]
-
Page 96
5–12 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 5 .6 Exter n al Memor y Module 1. Prepare the notebook for disassembly (refer to Section 5.3 ). 2. Position the notebook with the front to ward you. Memory Module Spare Part Number Information 1024 MB 512 MB 256 MB 336579-001 336578-001 366577-001[...]
-
Page 97
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–13 3. Loosen the PM2.0×4.0 scre w 1 that secures the memory module/Mini PCI compartment cov er to the notebook. 4. Lift the rear edge of the cov er up and swing it toward you 2 . 5. Remov e the memory module/Mini PCI compartment cover . ✎ The memory module/Mini PCI compartm[...]
-
Page 98
5–14 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 6. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module board. (The edge of the module opposite the socket rises a way from the notebook.) 7. Slide the module aw ay from the socket at an angle 2 . 8. Remov e the memory module boa[...]
-
Page 99
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–15 5 .7 Mini PCI Communi cations C ard 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the memory module/Mini PCI compartment cover ( Section 5.6 ). 3. Position the notebook with the front to ward you. Mini PCI Communications Car d Spare P ar t Number Infor[...]
-
Page 100
5–16 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 4. Disconnect the auxiliary and main 1 antenna cables from the Mini PCI communications card. ✎ Make note of which antenna cable is attached to which antenna clip on the Mini PCI communications card before disconnecting the cables. 5. Spread the 2 retaining tabs 2 on each [...]
-
Page 101
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–17 5 .8 Optical Driv e 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the memory module/Mini PCI compartment cover ( Section 5.6 ). 3. Position the notebook with right side to ward you. Optical Drive Spare P ar t Number Information 24X Max CD-ROM driv e 8X[...]
-
Page 102
5–18 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 4. Remov e the T8M2.0×9.0 screw 1 that secures the optical dri ve to the notebook. 5. Insert a thin tool, such as an unbent paper clip 2 , into the media tray release hole and release the media tray . 6. Use the media tray to slide the optical to the left and out of the no[...]
-
Page 103
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–19 5. 9 Ke yb o a rd 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the memory module/Mini PCI compartment cover ( Section 5.6 ). Ke yboard Spare P ar t Number Information Belgium Brazil Czech Repub lic Denmark F rance F rench Canada Germany Greece Hungary[...]
-
Page 104
5–20 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 3. Remov e the 2 T8M2.0×9.0 screws that secure the ke yboard to the notebook. Re mo v i ng the K ey board S cre ws[...]
-
Page 105
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–21 4. T urn the notebook display-side up with the front to ward you. 5. Open the notebook as far as possible. 6. Slide the 4 ke yboard retaining latches to ward you. Re leasing the K eyboar d Latc hes[...]
-
Page 106
5–2 2 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 7. Lift the rear edge of the ke yboard up and swing it to ward you until it rests on the palm rest. Rel e a si n g t h e Ke ybo a rd[...]
-
Page 107
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5 –2 3 8. Release the zero insertion force (ZIF) connector 1 to which the ke yboard cable is attached and disconnect the ke yboard cable 2 . Disconnecting the K ey board Ca ble 9. Remov e the keyboard. Re verse the abo ve procedure to install the ke yboard.[...]
-
Page 108
5–2 4 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5. 1 0 Sw i t c h C ove r 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the keyboard ( Section 5.9 ). 3. T urn the notebook upside do wn with the rear panel to ward you. 4. Remov e the 2 T8M2.0×2.0 screws that secure the switch cov er to the notebook[...]
-
Page 109
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–25 5. T urn the notebook display-side up with front to ward you. 6. Open the notebook as far as possible. 7. Disconnect the LED board cable 1 from the system board. 8. Insert a flat blade dri ver into the four notches 2 on the front edge of the switch cov er and lift up 3 unti[...]
-
Page 110
5–2 6 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5 . 1 1 LED Board ✎ This section applies only to full-featured models. 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the keyboard ( Section 5.9 ). 3. Remov e the switch cover ( Section 5.10 ). 4. T urn the notebook upside do wn with the rear panel t[...]
-
Page 111
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5 –2 7 6. Remov e the 4 PM1.5×4.0 screws 1 that secure the LED board to the switch cov er . 7. Remov e the LED board 2 . Re mo v i ng the LED Boar d Re verse the abo ve procedure to install the LED board.[...]
-
Page 112
5–2 8 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5. 1 2 Fa n 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Release the ke yboard ( Section 5.9 ). 3. Disconnect the fan cable 1 from the system board. 4. Loosen the 2 PM2.0×7.0 scre ws 2 that secure the fan to the notebook. 5. Remov e the fan 3 . Re mo v i ng[...]
-
Page 113
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–29 5 . 1 3 Hea t Sink 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Release the ke yboard ( Section 5.9 ). 3. Remov e the fan ( Section 5.12 ). Heat Sink Spare P ar t Number Information Heat sink (includes ther mal paste) 379799-001[...]
-
Page 114
5–30 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 4. Loosen the 4 PM2.0×8.0 shoulder scre ws 1 that secure the heat sink to the notebook. 5. Lift the right side of the heat sink 2 to disengage it from the processor . 6. Slide the heat sink up and to the right 3 to remov e it. ✎ Due to the adhesi ve quality of the therma[...]
-
Page 115
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–31 5. 1 4 P r o c e s s o r 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Release the ke yboard ( Section 5.9 ). 3. Remov e the fan ( Section 5.12 ). 4. Remov e the heat sink ( Section 5.13 ). Processor Spare P ar t Number Information Intel P entium M 2.13-GHz In[...]
-
Page 116
5–3 2 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5. Use a flat-blade scre w driver to turn the processor locking scre w one-quarter turn counterclockwise 1 until you hear a click. 6. Lift the processor straight up and remov e it 2 . ✎ The gold triangle 3 on the processor should be aligned in the front right corner when[...]
-
Page 117
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–33 5. 1 5 M o d e m B o a r d 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Release the ke yboard ( Section 5.9 ). 3. Remov e the 2 PM2.0×3.0 screws 1 that secure the modem board to the notebook. 4. Lift the right side of the modem board 2 to disconnect it from [...]
-
Page 118
5–34 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5 . 1 6 Internal Mem or y Module 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Release the ke yboard ( Section 5.9 ). Memory Module Spare Part Number Information 1024 MB 512 MB 256 MB 336579-001 336578-001 366577-001[...]
-
Page 119
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–35 3. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module board. (The edge of the module opposite the socket rises a way from the notebook.) 4. Slide the module aw ay from the socket at an angle 2 . 5. Remov e the memory module boa[...]
-
Page 120
5–3 6 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 5. 1 7 R TC B a t t e r y ✎ The R TC battery is included in the Miscellaneous Plastics Kit, spare part number 378236-001. 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Release the ke yboard ( Section 5.9 ). 3. Disconnect the R TC battery cable 1 from the sy[...]
-
Page 121
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–3 7 5 . 1 8 Di splay Assembl y 1. Prepare the notebook for disassembly ( Section 5.3 ), and then remov e the following components: a. Memory module/Mini PCI compartment cov er ( Section 5.6 ) b . Optical dri ve ( Section 5.8 ) c. K eyboard ( Section 5.9 ) d. Switch cov er ( Se[...]
-
Page 122
5–38 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5. Disconnect the display cable 1 from the system board. 6. Remov e the wireless antenna cables from the Mini PCI compartment and the top cov er clips 2 . 7. Remov e the 2 T8M2.0×9.0 screws 3 that secure the display assembly to the notebook. Disconnecting the Disp lay C ab[...]
-
Page 123
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–39 8. Swing the display assembly into a partially closed position. 9. Position the notebook with the rear panel to ward you. Ä CAUT I ON: Su ppor t the display as sembly whe n re mov ing the follo wing scr ew s. F ailure to support the displa y assembly can r esult in damage [...]
-
Page 124
5–40 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5. 1 9 To p C ove r 1. Prepare the notebook for disassembly ( Section 5.3 ), and then remov e the following components: a. Memory module/Mini PCI compartment cov er ( Section 5.6 ) b . Optical dri ve ( Section 5.8 ) c. K eyboard ( Section 5.9 ) d. Switch cov er ( Section 5.[...]
-
Page 125
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–41 3. Remov e the 13 T8M2.0×9.0 screws that secure the top cov er to the notebook. Re mo v i ng the T op Cov er Sc re ws, P art 1[...]
-
Page 126
5–4 2 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 4. T urn the notebook right-side up with the front to ward you. 5. Disconnect the R TC battery cable from the system board. Disconnecting the R T C Battery Cable[...]
-
Page 127
Remo val and Replace ment Pr ocedures Maintenance and Servi ce Guide 5–4 3 6. Remov e the 2 T8M2.0×9.0 screws 1 that secure the top cov er to the notebook. 7. Disconnect the T ouchPad cable 2 from the system board. Re mo v i ng the T op Cov er Sc re ws, P art 2[...]
-
Page 128
5–44 Maintenance and Serv ice Guide Remo val and R eplacement Procedur es 8. Lift up the rear edge of the top cov er 1 until it disengages from the base enclosure. 9. Swing the top cov er toward you 2 until the left and right sides of the top cov er disengage from the base enclosure. 10. Lift up on the left 3 and right sides 4 of the top cov er u[...]
-
Page 129
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–45 5. 2 0 S p e a ke r 1. Prepare the notebook for disassembly ( Section 5.3 ), and then remov e the following components: a. Memory module/Mini PCI compartment cov er ( Section 5.6 ) b . Optical dri ve ( Section 5.8 ) c. K eyboard ( Section 5.9 ) d. Switch cov er ( Section 5.[...]
-
Page 130
5–46 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 2. Disconnect the speaker cable from the system board. Disconnecting the S peaker Ca ble[...]
-
Page 131
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–4 7 3. Remov e the 4 T8M2.0×4.0 screws 1 that secure the speaker to the notebook. 4. Lift the speaker up 2 until it clears the system board. 5. Slide the speaker to ward you 3 and remov e it. Re mo v i ng the Speak er Re verse the abo ve procedure to install the speaker .[...]
-
Page 132
5–48 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5 .2 1 Digital Me dia B oard ✎ This section applies only to full-featured models. 1. Prepare the notebook for disassembly ( Section 5.3 ), and then remov e the following components: a. Memory module/Mini PCI compartment cov er ( Section 5.6 ) b . Optical dri ve ( Section [...]
-
Page 133
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–49 2. Release the ZIF connector to which the digital media board cable is attached and disconnect the digital media board cable 1 from the system board. 3. Remov e the digital media board 2 . Re mo v i ng the Digital Medi a Board Re verse the abo ve procedure to install the di[...]
-
Page 134
5–50 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5 .2 2 U SB/Audio B oard ✎ Full-featured models are equipped with a USB/audio board. Defeatured models are equipped with an audio board. The remov al procedures are identical for both boards. 1. Prepare the notebook for disassembly ( Section 5.3 ), and then remov e the fo[...]
-
Page 135
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–51 2. Position the notebook with the rear panel to ward you. 3. Disconnect the USB cable 1 and audio cable 2 from the system board. ✎ The USB cable is present only on full-featured models. 4. Remov e the PM1.5×3.0 screw 3 that secures the USB/audio board and shield to the b[...]
-
Page 136
5–5 2 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 5. 23 Sys t e m B o a r d ✎ When replacing the system board, ensure that the follo w ing components are remov ed from the defectiv e system board and installed on the replacement system board: ■ Memory modules ( Section 5.6 and Section 5.16 ) ■ Mini PCI communication[...]
-
Page 137
Remo val and Replace ment Pr ocedures Maintenance and Serv ice Guide 5–5 3 2. T urn the notebook upside do wn with the rear panel to ward you. 3. Disconnect the fan cable from the system board through the memory module compartment. 4. Disconnect the serial connector cable 1 and the Bluetooth cable 2 from the system board. 5. Remov e the T8M2.0×4[...]
-
Page 138
5–54 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 8. Use the optical dri ve connector to lift the system board up 1 until the po wer connector 2 is clear of the base enclosure. 9. Slide the system board to the left 3 at an angle and remov e it. Re mov ing the S yste m Board 10. If necessary , disconnect the RJ-11 connector[...]
-
Page 139
Remo val and Replace ment Pr ocedures Maintenance and Servi ce Guide 5–5 5 5 .2 4 Serial Connec tor Modul e ✎ This section applies only to full-featured models. 1. Prepare the notebook for disassembly ( Section 5.3 ), and then remov e the following components: a. Bluetooth board ( Section 5.5 ) b . Optical dri ve ( Section 5.8 ) c. K eyboard ( [...]
-
Page 140
5–5 6 Maintenance and Servi ce Guide Remo val and R eplacement Procedur es 3. Remov e the 2 HM5.0×9.0 screw locks 1 on each side of the serial connector . 4. Lift the serial connector module and cable out of the base enclosure 2 . 5. Disconnect the serial connector module cable from the system board 3 . Re mov ing the Ser ial Connect or Module[...]
-
Page 141
Maintenance and Serv ice Guide 6–1 6 Spec ifica tions This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Notebook Dimensions Metric U.S . Height Width Depth 32.8 cm 26.7 cm 3.1 cm 12.91 10.51 1.22 W eight Full-f eatured model with 15.0-inch displa y , optical dr ive , and 6-cell batter y pack Def e atured model with 14[...]
-
Page 142
6–2 Maintenance and Service Guide Spe cificat ions Relative humidity (noncondensing) Operating Nonoperating 10% to 90% 5% to 95% 10% to 90% 5% to 95% Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia) Nonoperating (14.7 to 4.4 psia) -15 m to 3,048 m -15 m to 12,192 m -50 ft to 10,000 ft -50 ft to 40,000 ft Shock Operating Nonoperating[...]
-
Page 143
Specific atio ns Maintenance and Serv ice Guide 6–3 Ta b l e 6 - 2 15.0-inch, SXGA+WV A, TFT Display Dimensions Height Width Diagonal 30.0 cm 22.9 cm 38.1 cm 11.8 in 9.0 in 15.0 in Number of colors Up to 16.8 million Contrast ratio 250:1 Brightness 150 nits typical Pixel resolution Pitch Fo r m a t Configuration 0.264 × 0.264 mm 1400 × 1050 RGB[...]
-
Page 144
6–4 Maintenance and Service Guide Spe cificat ions Ta b l e 6 - 3 15.0-inch, XGA, TFT Displa y Dimensions Height Width Diagonal 30.0 cm 22.9 cm 38.1 cm 11.8 in 9.0 in 15.0 in Number of colors Up to 16.8 million Contrast ratio 250:1 Brightness 150 nits typical Pixel resolution Pitch Fo r m a t Configuration 0.264 × 0.264 mm 1024 × 768 RGB vertic[...]
-
Page 145
Specific atio ns Maintenance and Serv ice Guide 6–5 Ta b l e 6 - 4 14.1-inch, XGA, TFT Displa y Dimensions Height Width Diagonal 28.5 cm 21.3 cm 35.8 cm 11.2 in 8.4 in 14.1 in Number of colors Up to 16.8 million Contrast ratio 250:1 Brightness 180 nits typical Pixel resolution Pitch Fo r m a t Configuration 0.279 × 0.279 mm 1024 × 768 RGB verti[...]
-
Page 146
6–6 Maintenance and Service Guide Spe cificat ions Ta b l e 6 - 5 Hard Drives 80-GB* 60-GB* 60-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 99 g 9.5 mm 70 mm 99 g 9.5 mm 70 mm 102 g Interface type ATA - 5 ATA - 5 ATA - 5 T ransfer rate Synchronous (maximum) Security 100 MB/sec A T A security 100 MB/sec ATA s e c u r i t y 100 MB/sec A T A [...]
-
Page 147
Specific atio ns Maintenance and Serv ice Guide 6–7 60-GB* 40-GB* 30-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 102 g 9.5 mm 70 mm 99 g 9.5 mm 70 mm 99 g Interface type ATA - 5 ATA - 5 ATA - 5 T ransfer rate Synchronous (maximum) Security 100 MB/sec ATA security 100 MB/sec ATA security 100 MB/sec A T A security Seek times (typical read, [...]
-
Page 148
6–8 Maintenance and Service Guide Spe cificat ions Ta b l e 6 - 6 Primary 6-cell, Li-Ion Battery Pac k Dimensions Height Width Depth We i g h t 2.00 cm 9.40 cm 13.40 cm 0.34 kg 0.79 in 3.70 in 5.28 in 0.75 lb Energ y V oltage Amp-hour capacity W att-hour capacity 11.1 V 4.4 Ah 48 Wh T e mperature Operating Nonoperating 5°C to 45°C 0°C to 60°C[...]
-
Page 149
Specific atio ns Maintenance and Serv ice Guide 6–9 Ta b l e 6 - 7 DV D - R O M D r i v e Applicable disc DV D - R O M ( DV D - 5 , DV D - 9 , DV D - 1 0 , DV D - 1 8 ) CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F o rm 1 and 2) CD-R CD-R W Photo CD (single and multisession) CD-Bridge Center ho[...]
-
Page 150
6–10 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 8 D VD/CD-R W Combo Drive Applicable disc Read: D VD-R, D VD-R W , D VD-ROM (D VD-5, D VD-9, D VD-10, DV D - 1 8 ) , CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F orm 1 and 2) CD-I ready (Mode 2, F orm 1 and 2) CD-R, CD-R W Photo CD (single and multi ses sio n) CD-[...]
-
Page 151
Specific atio ns Maintenance and Serv ice Guide 6–11 Disc thickness 1.2 mm (0.047 in) T rack pitch 0.74 µm Access time CD media DV D m e d i a Random Full stroke < 110 ms < 210 ms < 130 ms < 225 ms A u dio output level Line-out, 0.7 V r ms Cache buff er 2 MB Data transfer rate CD-R (24X) CD-R W (10X) CD-ROM (24X) DV D ( 8 X ) Multiwo[...]
-
Page 152
6–12 Maintenance and Servi ce Guide Spe cificat ions Ta b l e 6 - 9 D VD±R W and CD-R W Combo Drive Applicable disc Read: DV D - R , DV D - R W, D VD-ROM (D VD-5, DV D - 9 , DV D - 1 0 , DV D - 1 8 ) , CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, Fo r m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R, CD-R W Photo CD (single an[...]
-
Page 153
Specific atio ns Maintenance and Serv ice Guide 6–13 Disc thickness 1.2 mm (0.047 in) T rack pitch 0.74 µm Access time CD DV D Random Full stroke < 175 ms < 285 ms < 230 ms < 335 ms A u dio output level Audio-out, 0.7 Vrms Cache buff er 2 MB Data transfer rate CD-R (16X) CD-R W (8X) CD-ROM (24X) DV D ( 8 X ) D VD-R (4X) DV D - R W ( [...]
-
Page 154
6–14 Maintenance and Servi ce Guide Spe cificat ions T able 6-10 CD-ROM Drive Applicable disc CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F o rm 1 and 2) CD-R CD-R W Photo CD (single and multisession) CD-Bridge Center hole diameter 1.5 cm (0.59 in) Disc diameter Standard disc Mini disc 12 cm (4[...]
-
Page 155
Specific atio ns Maintenance and Serv ice Guide 6–15 T rack pitch 1.6 µm Access time CD media DV D m e d i a Random Full stroke < 110 ms < 220 ms < 125 ms < 225 ms A u dio output level Line-out, 0.7 Vrms Cache buff er 128 KB/s Data transfer rate CD-R (24X) Multiword DMA mode 2 3600 KB/s (150 KB/s at 1X CD rate) 16.6 MB/s Startup time[...]
-
Page 156
6–16 Maintenance and Servi ce Guide Spe cificat ions T able 6-11 System DMA Hard ware DMA System Function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memor y access controller DMA5* A vailab le f or PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller ca n use DMA 1, 2, or 5.[...]
-
Page 157
Specific atio ns Maintenance and Serv ice Guide 6–17 T able 6-12 System Interrupts Hard ware IRQ System Function IRQ0 System timer IRQ1 Standard 101-/102-K ey or Microsoft Natural K eyboard IRQ2 Cascaded IRQ3 Intel 82801DB/DBM U SB2 Enhanced Host Controller—24CD IRQ4 COM1 IRQ5* Cone xant AC—Link A udio Intel 82801DB/DBM SMBus Controller—24C[...]
-
Page 158
6–18 Maintenance and Servi ce Guide Spe cificat ions IRQ11 Intel USB EHCI controller—24CD Intel USB UHCI controller—24C4 Intel USB UHCI controller—24C7 Intel Pro/Wireless 2200BG TI OHCI 1394 host controller TI PCI1410 CardBus controller IRQ12 Synaptics PS/2 touch pad IRQ13 Numeric data processor IRQ14 Primar y IDE channel IRQ15 Secondar y I[...]
-
Page 159
Specific atio ns Maintenance and Serv ice Guide 6–19 T able 6-13 System I/O Addresses I/O Address (he x) System Function (shipping configuration) 000 - 00F DMA controller no . 1 010 - 01F Unused 020 - 021 Interrupt controller no. 1 022 - 024 Opti chipset configuration registers 025 - 03F Unused 02E - 02F 87334 “Super I/O” configuration f or C[...]
-
Page 160
6–20 Maintenance and Servi ce Guide Spe cificat ions I/O Address (he x) System Function (shipping configuration) 0A2 - 0BF Unused 0C0 - 0DF DMA controller no . 2 0E0 - 0EF Unused 0F0 - 0F1 Coprocessor busy clear/reset 0F2 - 0FF Unused 100 - 16F Unused 170 - 177 Secondar y fixed disk controller 178 - 1EF Unused 1F0 - 1F7 Primar y fixed disk contro[...]
-
Page 161
Specific atio ns Maintenance and Serv ice Guide 6–21 I/O Address (he x) System Function (shipping configuration) 2F0 - 2F7 Unused 2F8 - 2FF Infrared por t 300 - 31F Unused 320 - 36F Unused 370 - 377 Secondar y diskette drive controller 378 - 37F P arallel por t (LPT1/default) 380 - 387 Unused 388 - 38B FM synthesizer—OPL3 38C - 3AF Unused 3B0 -[...]
-
Page 162
6–2 2 Maintenance and Servi ce Guide Spe cificat ions T able 6-14 System Memory Map Size Memory Address System Function 640 KB 00000000-0009FFFF Base memory 128 KB 000A0000-000BFFFF Video memory 48 KB 000C0000-000CBFFF Video BIOS 160 KB 000C8000-000E7FFF Unused 64 KB 000E8000-000FFFFF System BIOS 15 MB 00100000-00FFFFFF Extended memor y 58 MB 010[...]
-
Page 163
Maintenance and Serv ice Guide A–1 A Con nector P in Ass ignme nts Ta b l e A - 1 A udio-Out (Headphone) Pin Signal Pin Signal 1 A u dio out, left channel 3 Ground 2 A u dio out, right channel[...]
-
Page 164
A–2 Maintenance and Service Guide Connec tor P in Assignments Ta b l e A - 2 A udio-In (Microphone) Pin Signal Pin Signal 1 A u dio signal in 3 Ground 2 A u dio signal in Ta b l e A - 3 Universal Serial Bus Pin Signal Pin Signal 1 +5 VDC 3 Data + 2 Data – 4 Ground[...]
-
Page 165
Connect or P in Assignments Maintenance and Serv ice Guide A–3 Ta b l e A - 4 Serial Pin Signal Pin Signal 1 Carrier detect 6 Data set ready 2 Receive data 7 Ready to send 3 T ransmit data 8 Clear to send 4 Data terminal ready 9 Ring indicator 5 Ground[...]
-
Page 166
A–4 Maintenance and Service Guide Connec tor P in Assignments Ta b l e A - 5 P arallel P ort Pin Signal Pin Signal 1 Strobe 14 A uto linef eed 2 Data bit 0 15 Error 3 Data bit 1 16 Initialize printer 4 Data bit 2 17 Select in 5 Data bit 3 18 Ground 6 Data bit 4 19 Ground 7 Data bit 5 20 Ground 8 Data bit 6 21 Ground 9 Data bit 7 22 Ground 10 Ackn[...]
-
Page 167
Connect or P in Assignments Maintenance and Serv ice Guide A–5 Ta b l e A - 6 S-Video-Out Pin Signal Pin Signal 1 S-VHS color (C) signal 5 TV -CD 2 Composite video signal 6 S-VHS intensity ground 3 S-VHS intensity (Y) signal 7 Composite video ground 4 S-VHS color ground 12 3 45 6 7[...]
-
Page 168
A–6 Maintenance and Service Guide Connec tor P in Assignments Ta b l e A - 7 External Monitor Pin Signal Pin Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor detect 4 Not connected 12 DDC 2B data 5 Ground 13 Horizontal sync 6 Ground analog 14 V er tical sync 7 Ground analog 15 DDC 2B clock 8 Ground analog[...]
-
Page 169
Connect or P in Assignments Maintenance and Serv ice Guide A–7 Ta b l e A - 8 RJ-11 (Modem) Pin Signal Pin Signal 1 Unused 4 Unused 2 Tip 5 Unused 3 Ring 6 Unused[...]
-
Page 170
A–8 Maintenance and Service Guide Connec tor P in Assignments Ta b l e A - 9 RJ-45 (Network) Pin Signal Pin Signal 1 T ransmit + 5 Unused 2 T ransmit – 6 Receiv e – 3 Receive + 7 Un used 4 Unused 8 Unused[...]
-
Page 171
Maintenance and Serv ice Guide B–1 B P o w er C ord Set Requ irements 3-Con duc tor P o wer Cord Set The wide range input feature of the notebook permits it to operate from any line v oltage from 100 to 120 or 220 to 240 volts A C. The po wer cord set included with the notebook meets the requirements for use in the country where the equipment is [...]
-
Page 172
B–2 Maintenance and Service Guide P ow er Cor d Set Requirements Gen eral Requirements The requirements listed belo w are applicable to all countries. ■ The length of the po wer cord set must be at least 1.5 m (5.0 ft) and a maximum of 2.0 m (6.5 ft). ■ All po wer cord sets must be approved b y an acceptable accredited agency responsible for [...]
-
Page 173
P ow er Cord Set Requir ements Maintenance and Serv ice Guide B–3 Countr y- Spec ifi c Requirements 3-Conductor P ower Cor d Set Requirements Country Accredited Agency Applicable Note Number Au s t ra l i a EANSW 1 Au s t r i a OV E 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMK O 1 Finland FIMK O 1 F rance UTE 1 Germany VDE 1 Italy IMQ 1 Jap a n MET[...]
-
Page 174
B–4 Maintenance and Service Guide P ow er Cor d Set Requirements The Netherlands KEMA 1 Norwa y NEMK O 1 Sweden SEMK O 1 Switzerland SEV 1 United Kingdom BSI 1 United States UL 2 ✎ NOTES: 1. The fle x ible cord m ust be <HAR> T ype HO5VV -F , 3-conductor , 1.0 mm² conductor size . P ower cord set fittings (appliance coupler and w all plu[...]
-
Page 175
Maintenance and Serv ice Guide C–1 C Scre w List ing This appendix provides specif ication and reference information for the scre ws and screw locks used in the notebook. All scre ws and scre w locks listed in this appendix are av ailable in the Scre w Kit, spare part number 378235-001.[...]
-
Page 176
C–2 Maintenance and Servi c e Guide Scr ew Listing Phillips M2 .0×4. 0 Scr ew L ocations Ta b l e C - 1 Phillips PM2.0×4.0 Screw Color Qty . Length Thread Head Width Black 3 4.0 mm 2.0 mm 4.0 mm Where used: 1 2 screws that secure the hard driv e co ver to the notebook (screws are captured on the cov er by C clips; documented in Section 5.3 ) 2 [...]
-
Page 177
Sc rew Li s t i n g Maintenance and Serv ice Guide C–3 Phillips M2 .5×13 .0 S cr ew L ocation Ta b l e C - 2 Phillips PM2.5×13.0 Spring-loaded Hard Drive Retention Scre w Color Qty . Length Thread Head Width Silver 1 13.0 mm 2.5 mm 5.5 mm Where used: 1 screw that secures the hard driv e to th e notebook (screw is captured on the hard drive fram[...]
-
Page 178
C–4 Maintenance and Servi c e Guide Scr ew Listing Phillips M2 .5×4. 0 Shoulder Scr ew , Phillips P M2 .5×4. 0 Scr ew , and Phillips 1. 5×3. 5 Scr ew L ocations Ta b l e C - 3 Phillips PM2.5×4.0 Shoulder Screw , Phillips PM2.5×4.0 Screw , and Phillips 1.5×3.5 Screw Color Qty . Length Thread Head Width Silver 2 4.0 mm 2.5 mm 4.0 mm Color Qty[...]
-
Page 179
Sc rew Li s t i n g Maintenance and Serv ice Guide C–5 T orx 8 M2 .0×9 . 0 Scr ew L ocation Ta b l e C - 4 T orx8 M2.0×9.0 Screw Color Qty . Length Thread Head Width Black 24 9.0 mm 2.0 mm 4.0 mm Where used: 1 screw that secures the optical driv e to the notebook (documented in Section 5.8 ) mm[...]
-
Page 180
C–6 Maintenance and Servi c e Guide Scr ew Listing T orx 8 M2 .0×9 . 0 Scr ew L ocations Ta b l e C - 4 T orx8 M2.0×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 24 9.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the k eyboard to the notebook (documented in Section 5.9 ) mm[...]
-
Page 181
Sc rew Li s t i n g Maintenance and Serv ice Guide C–7 T orx 8 M2 .0×9 . 0 Scr ew L ocations Ta b l e C - 4 T orx8 M2.0×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 24 9.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the disp la y assembly to the notebook (documented in Section 5.18 ) mm[...]
-
Page 182
C–8 Maintenance and Servi c e Guide Scr ew Listing T orx 8 M2 .0×9 . 0 Scr ew L ocations Ta b l e C - 4 T orx8 M2.0×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 24 9.0 mm 2.0 mm 4.0 mm Where used: 4 screws that secure the disp la y assembly to the notebook (documented in Section 5.18 ) mm[...]
-
Page 183
Sc rew Li s t i n g Maintenance and Serv ice Guide C–9 T orx 8 M2 .0×9 . 0 Scr ew L ocations Ta b l e C - 4 T orx8 M2.0×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 24 9.0 mm 2.0 mm 4.0 mm Where used: 13 screws that secure th e top co ver to the notebook (documented in Section 5.19 ) mm[...]
-
Page 184
C–10 Maintenance and Servi ce Guide Scr ew Listing T orx 8 M2 .0×9 . 0 Scr ew L ocations Ta b l e C - 4 T orx8 M2.0×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 24 9.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the top co ver to the notebook (documented in Section 5.19 ) mm[...]
-
Page 185
Sc rew Li s t i n g Maintenance and Serv ice Guide C–11 T orx 8 M2 .0×2 . 0 Scr ew L ocations Ta b l e C - 5 T orx8 M2.0×2.0 Screw Color Qty . Length Thread Head Width Black 2 2.0 mm 2.0 mm 6.0 mm Where used: 2 screws that secure the s witch cov er to the notebook (documented in Section 5.10 ) mm[...]
-
Page 186
C–12 Maintenance and Servi ce Guide Scr ew Listing Phillips M1. 5×4.0 Sc re w Locations Ta b l e C - 6 Phillips PM1.5×4.0 Screw Color Qty . Length Thread Head Width Silver 4 4.0 mm 1.5 mm 4.0 mm Where used: 4 screws that secure the LED board to the s witch cov er (documented in Section 5.11 ) mm[...]
-
Page 187
Sc rew Li s t i n g Maintenance and Serv ice Guide C–13 Phillips P M2 .0×7 .0 Sc re w Locations Ta b l e C - 7 Phillips PM2.0×7.0 Screw Color Qty . Length Thread Head Width Silver 2 7.0 mm 2.0 mm 4.5 mm Where used: 2 screws that secure the f an to the notebook (screws are captured on the f an assembly b y an O clip; documented in Section 5.12 )[...]
-
Page 188
C–14 Maintenance and Servi ce Guide Scr ew Listing Phillips P M2 .0×8. 0 Shoulder Scr ew L ocations Ta b l e C - 8 Phillips PM2.0×8.0 Shoulder Screw Color Qty . Length Thread Head Width Silver 4 8.0 mm 2.0 mm 5.0 mm Where used: 4 screws that secure the heat sink to the notebook (screws are captured on the heat sink b y C clips; documented in Se[...]
-
Page 189
Sc rew Li s t i n g Maintenance and Serv ice Guide C–15 Phillips P M2 .0×3 .0 S cr ew L ocations Ta b l e C - 9 Phillips PM2.0×3.0 Screw Color Qty . Length Thread Head Width Black 2 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the mo dem board to the notebook (documented in Section 5.15 ) mm[...]
-
Page 190
C–16 Maintenance and Servi ce Guide Scr ew Listing T orx8 M2 .0×4. 0 Scr ew L ocations T able C-10 T orx8 M2.0×4.0 Screw Color Qty . Length Thread Head Width Black 6 4.0 mm 2.0 mm 4.0 mm Where used: 4 screws that secure the speak er to the notebook (documented in Section 5.20 ) mm[...]
-
Page 191
Sc rew Li s t i n g Maintenance and Serv ice Guide C–17 T orx8 M2 .0×4. 0 Scr ew L ocation T able C-10 T orx8 M2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 6 4.0 mm 2.0 mm 4.0 mm Where used: 1 screw that secures the US B/audio board the notebook (documented in Section 5.22 ) mm[...]
-
Page 192
C–18 Maintenance and Servi ce Guide Scr ew Listing T orx 8 M2 .0×4. 0 Scr ew L ocation T able C-10 T orx8 M2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 6 4.0 mm 2.0 mm 4.0 mm Where used: 1 screw that secures the system board the notebook (documented in Section 5.23 ) mm[...]
-
Page 193
Sc rew Li s t i n g Maintenance and Serv ice Guide C–19 H ex So cket HM 5.0×9 .0 S crew Lo ck Loc a tio n s T able C-11 Hex Soc ket HM5.0×9.0 Screw Lock Color Qty . Length Thread Head Width Silver 6 9.0 mm 2.5 mm 5.0 mm Where used: 1 2 screw loc ks that secure the system board to the notebook only on HP Compaq nc6110 and nc6120 notebook models [...]
-
Page 194
C–20 Maintenance and Servi ce Guide Scr ew Listing H ex So cket HM 5.0×9 .0 S crew Lo ck Loc a tio n s T able C-11 Hex Soc ket HM5.0×9.0 Screw Loc k (Continued) Color Qty . Length Thread Head Width Silver 6 9.0 mm 2.5 mm 5.0 mm Where used: 2 screw loc ks that secure the ser ial connector board to the system board (documented in Section 5.24 ) m[...]
-
Page 195
Maintenance and Serv ice Guide Index–1 Ind e x 1394 port 1–11 6-in-1 Digital Media Slot 1–7 6-in-1 Digital Media Slot light 1–7 A AC adapter, spare part numbers 3–15 , 3–18 arrow keys 1–15 audio board removal 5–50 spare part number 3–7 , 3–22 , 5–50 audio board cable 3–13 audio troubleshooting 2–21 audio-in jack location 1[...]
-
Page 196
Index–2 Maintenance and Servi ce Guide Index components bottom 1–20 front 1–6 keyboard 1–12 , 1–14 left-side 1–10 rear 1–10 right-side 1–8 top 1–16 , 1–18 Computer Setup Advanced Menu 2–4 Main Menu 2–2 overview 2–1 Security Menu 2–3 Tools Menu 2–4 connector pin assignments audio-in A–2 audio-out A–1 external monito[...]
-
Page 197
Index Maintenance and Serv ice Guide Index–3 DVD±RW and CD-RW Combo Drive OS loading problems 2–20 precautions 4–3 removal 5–17 spare part number 3–11 , 3–14 , 3–24 , 5–17 specifications 6–12 DVD-ROM drive OS loading problems 2–20 precautions 4–3 removal 5–17 spare part number 3–11 , 3–14 , 3–19 , 3–24 , 5–17 spec[...]
-
Page 198
Index–4 Maintenance and Servi ce Guide Index spare part numbers 3–11 , 3–14 , 3–15 , 3–20 , 3–23 specifications 6–6 hard drive bay 1–21 hard drive cover illustrated 3–12 removal 5–7 hard drive light 1–7 headphone jack location 1–9 pin assignments A–1 heat sink removal 5–29 spare part number 3–3 , 3–23 , 5–29 I I/O [...]
-
Page 199
Index Maintenance and Serv ice Guide Index–5 Miscellaneous Plastics Kit components 3–5 , 3–12 spare part number 3–5 , 3–12 , 3–22 Miscellaneous Plastics Kit (for use with docking station), spare part number 3–15 modem board removal 5–33 spare part number 3–5 , 3–24 , 5–33 modem cable illustrated 3–13 removal 5–54 modem jac[...]
-
Page 200
Index–6 Maintenance and Servi ce Guide Index power/standby button 1–16 power/standby light 1–7 presentation mode button 1–17 processor removal 5–31 spare part numbers 3–5 , 3–21 , 5–31 R rear components 1–10 removal/replacement preliminaries 4–1 procedures 5–1 right-side components 1–8 RJ-11 connector module and cable illust[...]
-
Page 201
Index Maintenance and Serv ice Guide Index–7 S-Video-out jack location 1–13 pin assignments A–5 switch cover removal 5–24 spare part numbers 3–3 , 3–21 , 3–22 , 5–24 system board removal 5–52 spare part numbers 3–7 , 3–21 , 3–22 , 3–24 , 5–52 system DMA 6–16 system memory map 6–22 T tools required 4–1 top component[...]