Infiniti FX35 (2014) manual

2014 Infiniti QX70 Owner’s M anual Printing: June 2013 (12) / OM14E 0S51U0 / Printed in U.S.A. For y our safety , r ead c arefully and keep in thi s v ehicle. 2014 Infiniti QX70[...]

Y our INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior crafts- manship with a simple, refined aesthetic sensitivity associated with traditional Ja- panese culture. The result is a different notion of luxury and beauty. The car itself is important, but so is the sense of harmony that the[...]

. AL WAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle. . AL WAYS r eview this Owner ’ s Manual for important safety information. ON-P AVEMENT AND OFF-ROAD DRIVING This vehicle will handle and maneuver differently from an ordinary passenger car because it has a higher center of gravity. As wi[...]

SIC0697 If you see the symbol above, it means “ Do not do this ” or “ Do not let this happen ” . If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to those above indicate movement or action. Arrows in an illustration that are simil[...]

INFINITI CUSTOMER CARE PROGRAM INFINITI CARES ... Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your INFINITI retailer are our primary concerns. Y our INFINITI retailer is always available to assist you with all your automobile sales and servi ce needs. However,[...]

Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and c ontrols Pre-driving c hec ks and adjustments Monitor, climate, audio, phone and voic e recognition systems Starting and driving In case of emergency Appearance and c are Maintenance and do-it-yourself T ec hnic al and consumer informat[...]

[...]

0 Illustrated table of contents Seats, seat belts and supplemental restraint system (SRS) ....................................................... 0-2 Exterior front ....................................................... 0-3 Exterior rear ......................................................... 0-4 Passenger compartment ...........................[...]

0-2 Illustrated table of contents JVC0316X 1. Child restraint anchor points (for top tether strap child restraint) (Page 1- 23, P .1-34) 2. Seat belts (P .1-11) 3. Front-seat Active Head Restraint (P .1-6) 4. Roof-mounted curtain side-impact and rollover supplemental air bags (P .1-37) 5. Supplemental front-impact air bags (P .1-37) 6. LA TCH (Lowe[...]

JVC0317X 1. Hood (P . 3-18) 2. Headlight and turn signal (P .2-38) — Bulb replacement (P .8- 29) — Adaptive Front lighting System (AFS) (if so equipped) (P .2-42) 3. Windshield wiper and washer (P .2-34) — Maintenance (P .8-22) 4. Moonroof (P .2-62) 5. Roof rack (if so equipped) (P .2-59) 6. Power windows (P .2-60) 7. Outside mirrors (P . 3-3[...]

0-4 Illustrated table of contents SSI0446 1. Rear view camera (P .4- 24, P .4-31) 2. Lift gate (P . 3-18) — Intelligent Key system (P . 3-6) — Remote keyless entry system (P .3-14) 3. Rear window defroster (P .2-37) 4. High-mounted stop light (Bulb repla- cement) (P .8-29) 5. Rear window wiper and washer (P .2-37) — Maintenance (P .8-24) 6. A[...]

JVC0315X 1. Coat hooks (P .2-55) 2. Rear personal light (P .2-65) 3. Power window controls (P .2-60) 4. Automatic drive positioner switch (if so equipped) (P . 3-32) 5. Sun visors (P . 3-28) 6. Moonroof switch (P .2-62) 7. Map light (P .2-64) 8. Sunglasses holder (P .2-52) 9. Inside rearview mirror (P . 3-29) — HomeLink ® (P .2-67) — Compass ([...]

0-6 Illustrated table of contents SIC4246 1. Outside mirror remote cont rol switch (P .3- 30) 2 . Intelligent Brake Assist (IBA) off switch (if so equipped) (P .2-49) 3. Instrument brightness cont rol switch (P .2-43) 4. Headlight, fog light and turn signal switch (P .2-38) 5. Steering-wheel-mounted controls (left side) — For audio system (P .4-5[...]

10. Vehicle Dynamic Control (VDC) OFF switch (P . 5-85) 11. Intelligent Key port (P . 5-13) 12. Power lift gate switc h (P . 3-18) 13. Power lift gate main switc h (P .3-18) 14. TRIP/RESET switch for twin trip od- ometer (P .2-7) 1 5. Electric tilting/telescopic steering wheel lever (if so equipped) (P .3-27) 1 6. Manual tilting/telescopic steering[...]

0-8 Illustrated table of contents JVC0209X 1. Side ventilator (P .4-48) 2. Paddle shifter (if so equipped) (P .5-17) 3. Meters and gauges (P .2-6) 4. Center ventilator (P .4-48) 5. Center multi-function control panel — Navigation system* (if so equipped) — Vehicle information and setting buttons (P .4-9) — Around View Monitor (if so equipped)[...]

SIC3825 1. T achometer (P .2-8) 2. Warning/Indic ator lights (P .2-13) 3. Speedometer (P .2-7) 4. Engine coolant temperature gauge (P .2-8) 5. Dot matrix liquid crystal display/ Odometer/twin trip odometer (P .2-22) 6. Fuel gauge (P .2-9) Illustrated table of contents 0-9 METERS AND GAUGES[...]

0-10 Illustrated table of contents SDI2262 VQ37VHR ENGINE 1. Fuse/fusible link holder (P .8- 25) 2. Battery (P .8-17) 3. Radiator filler cap (P .8-9) 4. Engine oil dipstic k (P .8-11) 5. Engine oil filler c ap (P .8-11) 6. Brake fluid reservoir (P .8-16) 7. Window washer fluid reservoir (P .8-16) 8. Power steering fluid reservoir (P .8-15) 9. Air c[...]

SDI2264 VK50VE ENGINE 1. Fuse/fusible link holder (P .8- 25) 2. Battery (P .8-17) 3. Engine oil filler c ap (P .8-11) 4. Radiator filler cap (P .8-9) 5. Engine oil dipstic k (P .8-11) 6. Brake fluid reservoir (P .8-16) 7. Window washer fluid reservoir (P .8-16) 8. Power steering fluid reservoir (P .8-15) 9. Air cleaner (P .8-21) 10. Drive belt loca[...]

0-12 Illustrated table of contents Warning light Name Page All-Wheel Drive (AWD) warning light (AWD models)* 2-14 Anti-lock Braking System (ABS) warning light 2-14 Automatic Transmission check warning light 2-14 Brake warning light 2-14 Charge warning light 2-15 Distance Control Assist (DCA) system warning light (orange)* 2-15 Engine oil pressure w[...]

MEMO Illustrated table of contents 0-13[...]

0-14 Illustrated table of contents MEMO[...]

1 Safety — Seats, seat belts and supplemental restraint system Seats ................................................................... 1-2 Front seats ...................................................... 1-3 Rear seats ....................................................... 1-5 Head restraints................................................ 1[...]

1-2 Safety — Seats, seat belts and supplemental restraint system SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be danger- ous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and r eceive neck or other serious injuries. Y ou could also slide under the lap bel[...]

FRONT SEA TS Front power seat adjustment Operating tips: . The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 sec- onds, then reactivate the switch. . Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery. See “ Automatic[...]

1-4 Safety — Seats, seat belts and supplemental restraint syst em SSS1052 Seat lifter: Push the front or rear end of the switch up or down to adjust the angle or height of the seat. SSS1053 Lumbar support: The lumbar support feature provides lower back support to the driver. Push the front or back end of the switc h to adjust the seatbac k lumbar[...]

SSS0893 Thigh extension (if so equipped): The front portion of the front seats can be extended forward for seating comfort. Pull up and hold the lever * 1 to extend the front portion to the desired position. REAR SEA TS WARNING . Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these area[...]

1-6 Safety — Seats, seat belts and supplemental restraint syst em WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be danger- ous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and r eceive neck or other serious injuries. Y ou could also slide under the lap belt and r[...]

JVR0051X The illustration shows the seating posi- tions equipped with head restraints and headrest. The head restraints are adjusta- ble. Indicates the seating position is equipped with a head restraint. + indicates the seating position is equipped with a headrest. SSS0992 Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks SS[...]

1-8 Safety — Seats, seat belts and supplemental restraint syst em SSS0993 T o raise the head restraint, pull it up. SSS0994 T o lower, push and hold the lock knob and push the head restraint down. SSS0995 Removal Use the following procedure to remove the adjustable head restraints. 1. Pull the head restraint up to the highest position. 2. Push an[...]

seating position. SSS0996 Install 1. Align the head restraint stalks with the holes in the seat. Make sure that the head restraint is facing the correct direction. The stalk with the adjustment notches * 1 must be installed in the hole with the loc k knob * 2 . 2. Push and hold the lock knob and push the head restraint down. 3. Properly adjust the [...]

1-10 Safety — Seats, seat belts and supplemental restraint syst em certain rear-end collisions. After the colli- sion, the head restraints return to their original position. Adjust the Active Head Restraints properly as described earlier in this section. SSS0901 ARMREST Rear armrest Pull the tab and draw the armrest forward until it is horizontal[...]

PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chance s of being injured or killed in an accident and/or the severity of injury may be greatly reduced. INFINITI strongly encourages you and all of your passengers to buckle [...]

1-12 Safety — Seats, seat belts and supplemental restraint syst em WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a c hild restraint. . The seat belt should be properly ad- justed to a snug fit. Failure to do so may[...]

SSS0016 SSS0014 PREGNANT WOMEN INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doc[...]

1-14 Safety — Seats, seat belts and supplemental restraint syst em tened, it may indicate the pre-crash seat belt system has a malfunction. Have your INFINITI retailer chec k and repair the system. When the seat belt is retracted repeatedly in a short period of time, the motor may not be able to retract the seat belt. After 30 seconds, the motor [...]

Then smoothly pull the belt out of the retractor . SSS0290 3. Position the lap belt port ion low and snug on the hips as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slac k. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger and rear passenger seating positions ’ thr[...]

1-16 Safety — Seats, seat belts and supplemental restraint syst em SSS0326 Unfastening the seat belts T o unfasten the seat belt, push the button on the buckle. The seat belt automatically retracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: . When the belt is pulled quickly [...]

WARNING . After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position. . The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effec- tiveness of the entire restraint system and increase the chance or sev[...]

1-18 Safety — Seats, seat belts and supplemental restraint syst em until they are co mpletely dry. . If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dr y cloth. . Periodically chec k to see that the seat belt and the metal components such as buckl[...]

children. See “ Child restraints ” (P .1-20). A child restraint may be secured in the vehicle by using either the LA TCH (Lower Anchor and Tethers for CHildren) system or with the vehicle seat belt. See “ Child restraints ” (P .1-20) for more information. INFINITI recommends that all pre-teens and children be restrained in the rear seat. St[...]

1-20 Safety — Seats, seat belts and supplemental restraint system WARNING Never let a c hild stand or kneel on any seat and do not allow a child in the cargo area. The child could be seriously injured or killed in a sudden stop or collision. SSS0099 SSS0100 PRECAUTIONS ON CHILD RE- STRAINTS WARNING . Failure to follow the warnings and instruction[...]

ward-facing child restraint installa- tion using the seat belts ” (P .1-30). — Even with the INFINITI Advanced Air Bag System, never install a rear- facing child restraint in the front seat. An inflating air bag could seriously injure or kill a child. A rear-facing child restraint must only be used in the rear seat. — Be sure to purchase a ch[...]

1-22 Safety — Seats, seat belts and supplemental restraint system SSS0904 LA TCH system lower anc hor locations Lower Anc hors and T ethers for CHildren (LA TCH) SYSTEM Y our vehicle is equipped with special anchor points that are used with the LA TCH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may al[...]

SSS0643 LA TCH webbing-mounted attac hment Installing c hild restraint LA TCH lower anc hor attac hments LA TCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to secure[...]

1-24 Safety — Seats, seat belts and supplemental restraint system strap is damaged. . Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or cargo that contacts the top tether strap may damage the [...]

SSS0649 Rear-facing rigid-mount ed — step 2 SSS0639 Rear-facing — ste p 3 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your hand to com- press the vehicle seat cushion and seatback [...]

1-26 Safety — Seats, seat belts and supplemental restraint system applicable). Not all child restraints fit in all types of vehicles. 5. Check to make sure the child restraint is properly secured prior to each use. If the c hild restraint is loose, repeat steps 1 through 4. SSS0100 REAR-FACING CHILD RESTRAINT IN- ST ALLA TION USING THE SEA T BEL [...]

SSS0654 Rear-facing — ste p 2 2. Route the seat belt tongue through the child restraint and insert it into the buck le until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer ’ s instructions for belt routing. SSS0655 Rear-facing — ste p 3 3. Pull the shoulder belt until the belt is fully extended. At this[...]

1-28 Safety — Seats, seat belts and supplemental restraint system SSS0657 Rear-facing — ste p 5 5. Remove any additional slack from the seat belt; press downward and rear- ward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. SSS0658 Rear-facing — ste p 6 6. After[...]

SSS0645 Forward-f acing web-mounted — step 2 2. Secure the child restraint anc hor at- tachments to the LA TCH lower anchors. Check to make sure the LA TCH attach- ment is properly attached to the lower anchors. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor [...]

1-30 Safety — Seats, seat belts and supplemental restraint system SSS0647 Forward-f acing — step 4 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your knee to com- press the vehicle s[...]

SSS0640 Forward-f acing (front passenger seat) — step 1 Refer to all Warnings and Cautions in the “ Child safety ” and “ Child restraints ” sec- tions before installing a child restraint. Follow these steps to install a forward- facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you [...]

1-32 Safety — Seats, seat belts and supplemental restraint system SSS0651 Forward-f acing — step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Lock - ing Retractor (ALR) mode (child restraint mode). It reverts to Emergency Loc king Retractor (ELR) mode when the seat belt [...]

SSS0641 Forward-f acing — step 8 8. After attaching the child restraint, test it before you place the c hild in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and chec k to see if the belt holds the rest[...]

1-34 Safety — Seats, seat belts and supplemental restraint system SSS0902 INST ALLING TOP TETHER STRAP First, secure the child restraint with the LA TCH lower anc hors (rear outboard seat- ing positions only) or the seat belt, as applicable. 1. If necessary, raise or remove the head restraint to position the top tether strap over the top of the s[...]

LRS0453 . Check the booster seat in your vehicle to be sure it is compatible with the vehicle ’ s seat and seat belt system. . Make sure the child ’ s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the ce nter of the c hild ’ s ears. For example, if a low back booster seat * 1 is chosen, [...]

1-36 Safety — Seats, seat belts and supplemental restraint system SSS0640 1. If you must install a booster seat in the front seat, move the seat to the rear- most position. 2. Position the booster seat on the seat. Only place it in a forward-facing direc- tion. Always follow the booster seat manufacturer ’ s instructions. LRS0454 Front passenge[...]

SSS0676 7. If the booster seat is installed in the front passenger seat, push the ignition switch to the ON position. The front passenger air bag status light may or may not illuminate depending on the size of the child and the type of booster seat used. (See “ Front passenger air bag and status light ” (P .1-44).) PRECAUTIONS ON SUPPLEMENTAL R[...]

1-38 Safety — Seats, seat belts and supplemental restraint system SSS0131 SSS0132 WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear your seat belts to help re duce the risk or severity of injury in various kinds of accidents. . The front [...]

the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt usage then inflates the air bags as needed. Failure to properly wear seat belts ca n increase the risk or severity of injury in an acc[...]

1-40 Safety — Seats, seat belts and supplemental restraint syst em SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. . Children may be severely injured or killed[...]

SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact supplemen- tal air bags and roof-mounted curtain side- impact and rollover supplemental air bags: . The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact or lower severity side collision. Always wear your seat belts to help redu[...]

1-42 Safety — Seats, seat belts and supplemental restraint syst em SSS0903 1. Crash zone sensor 2. Supplemental front-impact air bag modules 3. Front seat-mounted side-impact sup- plemental air bag modules 4 . Occupant classification sensors (weight sensors) 5. Occupant detection system control unit 6. Roof-mounted curtain side-impact and rollove[...]

. Until you have confirmed with your retailer that your passenger seat ad- vanced air bag is working properly, position the occupants in the rear seating positions. This vehicle is equipped with the INFINITI Advanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification require- ments under U.S. regu[...]

1-44 Safety — Seats, seat belts and supplemental restraint syst em close to, or is against, the air bag module during inflation. The front air bags deflate quickly after a collision. The front air bags operate only when the ignition switch is in the ON position. After pushing the ignition switch to the ON position, the supplemental air bag warn- [...]

Front passenger air bag: The front passenger air bag is designed to automatically turn OFF when the vehicle is operated under some conditions as de- scribed below as permitted by U.S. regula- tions. If the front passenger air bag is OFF , it will not inflate in a crash. The driver air bag and other air bags in your vehicle are not part of this syst[...]

1-46 Safety — Seats, seat belts and supplemental restraint syst em may or may not be illuminated, depending on the size of the child and the type of child restraint being used. If the passenger air bag status light is not illuminated (indicating that the air bag might inflate in a crash), it could be that the child restraint or seat belt is not b[...]

material around the air bag system. . Removing or modifying the front pas- senger seat may affect the function of the air bag system and result in serious personal injury. . Modifying or tampering with the front passenger seat may result in serious personal injury. For example, do not change the front seats by placing material on the seat cushion o[...]

1-48 Safety — Seats, seat belts and supplemental restraint syst em another type of collision are similar to those of a higher severity side impact. They are designed to inflate on the side where the vehicle is impacted. They may not inflate in certain side collisions on the side where the vehicle is impacted. Curtain air bags are also designed to[...]

installing additional trim material, such as seat covers, around the side air bag. . Work around and on the side air bag and curtain air bag systems should be done by an INFINITI retailer. Installation of electrical equipment should also be done by an INFINITI retailer. The Supple- mental Restraint System (SRS) wiring harnesses* should not be modif[...]

1-50 Safety — Seats, seat belts and supplemental restraint syst em The supplemental air bag warning light is used to indicate malfunctions in the pretensioner system. (See “ Supplemental air bag warning light ” (P .1-50) for more details.) If the operation of the supple- mental air bag warning light indicates there is a malfunction, have the [...]

servicing: . The supplemental air bag warning light remains on after approximately 7 sec- onds. . The supplemental air bag warning light flashes intermittently. . The supplemental air bag warning light does not come on at all. Under these conditions, the air bags and/ or pretensioner systems may not operate properly. They must be checked and repair[...]

1-52 Safety — Seats, seat belts and supplemental restraint syst em MEMO[...]

2 Instruments and contr ols Coc kpit ................................................................ 2-3 Instrument panel ................................................. 2-5 Meters and gauges .............................................. 2-6 Speedometer and odometer ............................ 2-7 T achometer ..................................[...]

Storage ............................................................. 2-51 Cup holders .................................................. 2-51 Sunglasses holder ......................................... 2-52 Glove box ...................................................... 2-53 Console box .................................................. 2-54 Card[...]

SIC4246 1. Outside mirror remote cont rol switch 2 . Intelligent Brake Assist (IBA) off switch (if so equipped) 3. Instrument brightness cont rol switch 4. Headlight, fog light and turn signal switch 5. Steering-wheel-mounted controls (left side) — For audio system — For Bluetooth ® Hands-Free Phone System (with navigation system) — For Blue[...]

2-4 Instruments and contr ols wheel lever (if so equipped) 1 6. Manual tilting/telescopic steering wheel lever (if so equipped) 17. Center-console-mounted co ntrols — Climate controlled seat switches or Seat heater switc hes — SNOW mode switc h — Continuous Damping Control mode select switch (if so equipped)[...]

JVC0209X 1. Side ventilator 2. Paddle shifter (if so equipped) 3. Meters and gauges 4. Center ventilator 5. Center multi-function control panel — Navigation system* (if so equipped) — Vehicle information and setting buttons — Around View Monitor (if so equipped) 6. Center display 7. Cloc k 8. Hazard warning flasher switch 9. Front passenger s[...]

2-6 Instruments and contr ols SIC3825 1. T achometer 2. Warning/Indic ator lights 3. Speedometer 4. Engine coolant temperature gauge 5. Dot matrix liquid crystal display/ Odometer/twin trip odometer 6. Fuel gauge The needle indicators in the speedometer, tachomete r, engine coolant temperature gauge and fuel gauge may move slightly after the igniti[...]

SIC4277 Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). SIC3259 Odometer/twin trip odomet er Odometer/twin trip odometer The odometer * 1 and twin trip odometer * 2 are displayed on the dot matrix crystal display when the ignition switch is in the ON po[...]

2-8 Instruments and contr ols SIC3828 T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM). Do not rev the engine into the red zone * 1 . The red zone varies with each models. CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause [...]

SIC3256 FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition switch is pushed to the OFF position. Refill the fuel tank before the gauge registers “ E ” (Empty). The low fuel wa[...]

2-10 Instruments and controls SIC3181 When the ignition switch is pushed to the ON position, the compass display * B will indicate the direction of the vehicle ’ s heading. If the display reads “ C ” , calibrate the compass by driving the vehicle in 3 complete circles at less than 5 MPH (8 km/h). Y ou can also calibrate the compass by driving[...]

SIC0611B Zone map ZONE VARIA TION CHANGE PROCE- DURE The difference between magnetic north and geographical north is known as variance. In some areas, this difference can some- times be great enough to cause false compass readings. Follow these instruc- tions to set the varianc e for your particular location if this happens: 1. Push the switch for [...]

2-12 Instruments and controls while driving up or down a steep hill. (The compass returns to the correct compass point when the vehicle moves to an area where the geomagnetism is stabilized.) CAUTION . Do not install a ski rack, antenna, etc., which are attached to the vehicle by means of a magnet. They affect the operation of the co mpass. . When [...]

All-Wheel Drive (AWD) warning light (AWD models)* Lane departure warning light (orange)* Front passenger air bag status light Anti-lock Braking System (ABS) warning light Low tire pressure warning light High beam indicator light Master warning light Intelligent Brake Assist (IBA) off indicator light* Automatic transmission check warning light Previ[...]

2-14 Instruments and controls WARNING LIGHTS All-Wheel Drive (AWD) warning light (AWD models) The warning light comes on when the ignition switch is pushed to ON. It turns off soon after the engine is started. If the AWD system malfunctions, or the diameter of the front and the rear wheels are different, the warning light will either remain illumin[...]

fluid is necessary , add fluid and have the system chec ked by your INFINITI retailer. (See “ Brake fluid ” (P .8-16).) 2. If the brake fluid level is correct, have the warning system checked by an INFINITI retailer. Anti-lock Braking System (ABS) warning indicator: When the parking brake is released and the brake fluid level is sufficient, if [...]

2-16 Instruments and controls “ Engine oil ” (P .8-11).) CAUTION Running the engine with the engine oil pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by warranty . T urn off the engine as soon as it is safe to do so. Intelligent Cruise Control (ICC) system warning light (orange[...]

SURE information will be displayed. The tire pressure for each tire will also be displayed. When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label. The low tire pressure warning light does not automati- cally turn off wh[...]

2-18 Instruments and controls CAUTION . The TPMS is not a substitute for the regular tire pressure chec k. Be sure to chec k the tire pressure regularly . . If the vehicle is being driven at speeds of less than 16 MPH (25 km/h), the TPMS may not operate co rrectly. . Be sure to install the specified size of tires to the four wheels correctly. Maste[...]

bag warning light will turn off after about 7 seconds if the front-impact air bag and side air bag, curtain air bag systems and/ or pretensioner seat belt are operational. If any of the following conditions occur , the front air bag, side air bag, curtain air bag and pretensioner systems needs servi cing and your vehicle must be take n to your near[...]

2-20 Instruments and contr ols further details. Exterior light indicator This indicator illuminates when the head- light switch is turned to the AUTO, or position and the front parking lights, instrument panel lights, tail lights, lice nse plate lights or headlights are on. The indicator turns off when these lights are turned off. Front passenger a[...]

After a few driving trips, the light should turn off if no other potential emission control system malfunction ex- ists. If this indicator light remains on for 20 seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission cont rol system inspection/main- tenance test. (See “ R[...]

2-22 Instruments and contr ols are not operating. AUDIBLE REMINDERS Key reminder chime A chime will sound if the driver side door is opened while the ignition switch is pushed to the ACC position or pushed to the OFF or LOCK position with the Intelligent Key left in the Intelligent Key port. Make sure the ignition switch is pushed to the OFF positi[...]

—“ Driving the vehicle ” (P . 5-15). . Intelligent Cruise C ontrol (ICC) system —“ Intelligent Cruise Control (IC C) sys- tem (FULL SPEED RANGE) ” (P . 5-32). . Distance C ontrol Assist (DCA) system —“ Distance Control Assist (DCA) sys- tem ” (P . 5-54). . Intelligent Key system —“ Intelligent Key system ” (P . 3-6). —“ [...]

2-24 Instruments and contr ols JVI0677X[...]

INDICA TORS FOR OPERA TION 1. Engine start operation indicator This indicator appears when the shift lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. 2. Intelligent Key insert ion indicator This indicator appears when the Intelligent Key needs to be ins[...]

2-26 Instruments and contr ols 9. Low fuel warning This warning appears when the fuel level in the tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (E) position. There is a small reserve of fuel remaining in the tank when the fuel gauge reaches the empty (E) position. 10. Low washer fluid w[...]

played while the vehicle is controlled by the conventional (fixed speed) cruise con- trol mode of the ICC system. (See “ Intelli- gent Cruise Control (ICC) system (FULL SPEED RANGE) ” (P . 5-32).) 18. Distance Control Assist (DCA) system switc h indicator (if so equipped) The indicator is displayed when the Dis- tance Control Assist (DCA) syste[...]

2-28 Instruments and contr ols road conditions affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not mean your tires will last that long. Use the tire replacement indicator as a guide only and always perform regular tire checks. Failure to perform regular tire chec ks, inc[...]

SIC3829 TRIP C OMPUTER Switches for the trip computer are located on the right side of the combination meter panel. T o operate the trip computer , push the switches as shown above. * A switch * B switch When the ignition switch is pushed to the ON position, modes of the trip computer can be selected by pushing the switch * A . Each time the switch[...]

2-30 Instruments and contr ols actual fuel consumption. The display is updated every 30 seconds. The dte mode includes a low range warning feature. If the fuel level is low, the warning is displayed on the screen. When the fuel level drops even lower, the dte display will c hange to “——” . . If the amount of fuel added is small, the display[...]

. BACK Select this submenu to return to the top page of the setting mode. . LANGUAGE Select this submenu to choose lan- guage for display . . UNIT Select this submenu to c hoose the unit from MPG or l/100 km. . METER EFFECT Select this submenu to turn on and off the meter/ring illumination and needle sweep function when starting the en- gine. 7. W [...]

2-32 Instruments and contr ols SIC2045 How to arm the vehicle security system 1. Close all windows. The system can be armed even if the windows are open. 2. Push the ignition switch to the OFF position. 3. Remove the Intelligent Key from the vehicle. 4. Close all doors, hood and lift gate. Lock all doors. The doors can be loc ked with the Intellige[...]

INFINITI VEHICLE IMMOBILIZER SYSTEM The INFINITI V ehicle Immobilizer System will not allow the engine to start without the use of the registered Intelligent Key. Never leave these keys in the vehicle. FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may n[...]

2-34 Instruments and contr ols If the light still remains on and/or the engine will not start, see an INFINITI retailer for INFINITI Vehicle Immobilizer System service as soon as possible. Please bring all Intelligent Keys that you have when visiting an INFINITI retailer for service. WARNING In freezing temperatures the washer solu- tion may freeze[...]

SIC3626 T ype A SIC4492 T ype B WINDSHIELD WIPER AND WASHER OPERA TION The windshield wiper and washer operates when the ignition switc h is in the ON position. Push the lever down to operate the wiper at the following speed: * 1 Intermittent — intermittent operation The intermittent operation can be adjusted by turning the knob toward * A (Slowe[...]

2-36 Instruments and contr ols SIC4258 RAIN- SENSING AUTO WIPER SYS- TEM (if so equipped) The rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper speed depending on the rainfall and the vehicle speed by using the rain sensor located on the upper part of the windshield. T o set the rain-sensing auto wiper system,[...]

SIC3627 T ype A SIC4259 T ype B REAR WINDOW WIPER AND WASHER OPERA TION If the rear window wiper operation is interrupted by snow etc., the wiper may stop moving to protect its motor. If this occurs, turn the wiper switc h to OFF and remove the snow etc. on and around the wiper arms. Afte r about 1 minute, turn the switch ON again to operate the wi[...]

2-38 Instruments and contr ols XENON HEADLIGHTS WARNING HIGH VOL TAGE . When xenon headlights are on, they produce a high voltage. T o prevent an electric shoc k, never attempt to modify or disassemble. Always have your xenon headlights replaced at an INFINITI retai- ler. . Xenon headlights provide considerably more light than conventional headligh[...]

SIC3268 Autolight system The autolight system allows the headlights to be set so they turn on and off automatically . T o set the autolight system: 1. Make sure the headlight switch is in the AUTO position * 1 . 2. Push the ignition switch to the ON position. 3. The autolight system automatically turns the headlights on and off. T o turn the autoli[...]

2-40 Instruments and controls For automatic headlights off delay setting, see “ Comfort settings ” (P .4- 20). SIC3269 Headlight beam select * 1 T o select the low beam, put the lever in the neutral position as shown. * 2 T o select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam. *[...]

. Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically . SIC2275 Headlight aiming control (if so equipped) Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on[...]

2-42 Instruments and controls running lights illuminate once the parking brake is released. The daytime running lights will remain on until the ignition switch is pushed to the OFF position. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to[...]

SIC3830 Instrument brightness control The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operated, the dot matrix liquid crystal display switches to the brightness adjust- ment mode. Push the upper switch * A to brighten the instrument panel lights. The bar * 1 moves to the + [...]

2-44 Instruments and controls SIC3272 FOG LIGHT SWITCH T o turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. To turn them off, turn the switc h to the OFF position. The headlights must be on for the fog lights to operate. SIC3831 T o sound the horn, push the center pad area of the steering whee[...]

. Any liquid spilled on the heated seat should be removed immediately with a dry cloth. . When cleaning the seat, never use gasoline, thinner, or any similar materi- als. . If any malfunctions are found or the heated seat does not operate , turn the switch off and have the system c hecked by an INFINITI retailer . SSS0911 The front seats are warmed[...]

2-46 Instruments and controls SSS0905 The climate controlled seat warms up or cools down the front seats by blowing warm or cool air from the surface of the seat. The switches located on the center console can be operated independently of each other . 1. Start the engine. 2. Turn the control knob * A to the H (Heat) side * 1 or to the C (Cool) side[...]

turn the switc h off and have the system chec ked by an INFINITI retailer. SSD1156 The warning systems switch will turn on and off the Lane Departure Warning (LDW) system and the Forward Collision Warning (FCW) system at the same time. The LDW system will sound a warning chime and blink the lane departure warn- ing light (orange) to alert the drive[...]

2-48 Instruments and controls SIC3602 For driving or starting the vehicle on snowy roads or slippery areas, turn on the SNOW mode switch. The indic ator light * 1 on the switch will illuminate. When the SNOW mode is activated, engine output is con- trolled to avoid wheel spin. T urn off the SNOW mode for normal driving. SIC3848 The Continuous Dampi[...]

SIC3844 The vehicle should be driven with the Intelligent Brake Assist (IBA) system on for most driving co nditions. The Intelligent Brake Assist (IBA) system will sound a warning chime to alert the driver when the vehicle is traveling too close to the vehicle ahead and will apply the brake cont rol if necessary . T o turn off the system, push the [...]

2-50 Instruments and controls SIC3325 If the power supply is disconnected, the clock will not indicate the correct time. Readjust the time. ADJUSTING THE TIME 1. To set the clock forward, push the button * 1 . 2. To set the clock backward, push the button * 2 . 3. To move forward or backward faster, push and hold the button more than 5 seconds. For[...]

The power outlet is used for powering electrical accessories such as cellular telephones. CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical acc essory. . Use power outlet with the engine run- nin[...]

2-52 Instruments and controls SIC3118 Front T o open the cup holder, push the lid * 1 . The flap will be folded down when insert- ing a large container . T o close, lower the cup holder lid and push it down lightly . T o clean the front cup holder, pull up the inside tray * 2 and remove it. The cup holder is not designed to store personal effects. [...]

. Do not leave glasses in the sunglasses holder while parking in direct sunlight. The heat may damage the glasses. SIC3838 GL OVE BOX WARNING Keep glove box lid closed while driving to help prevent injur y in an accident or a sudden stop. T o open the glove box, pull the handle * 1 . T o close, push the lid in until the lock latches. T o lock * 2 /[...]

2-54 Instruments and controls SIC3839 Front C ONSOLE BOX Front When the lever * A (front passenger ’ s seat side) is pulled, the upper case is available for storing some small items. When the lever * B (driver ’ s seat side) is pulled, the bottom case is available for storing some larger ones. SIC3840 Rear T o open the lid, push the button * A [...]

SIC3663 CARD HOLDER Pull the sun visor down * 1 and slide a card in the card holder * A . SIC3248 C OAT HOOKS The coat hooks are equipped beside the rear personal lights. CAUTION Do not place items which are more than 2 lb (1 kg) on the hook. SIC3849 CARGO HOOKS (if so equipped) WARNING . Always make sure that the cargo is properly secured. Use the[...]

2-56 Instruments and controls CAUTION Do not apply a total load of more than 22 lb (10 kg) to a single hook. SIC3850 CARGO NET (if so equipped) The cargo net helps keep packages in the cargo area from moving around while your vehicle is driven. T o install the cargo net, attac h the hooks to the retainers. WARNING . Properly secure all cargo to hel[...]

SIC3841 CARGO C OVER (if so equipped) The cargo cover keeps the contents in the cargo area hidden from the outside. T o use the cargo cover, unfold the flap as illustrated. SIC3842 T o remove the carg o cover, 1. Return the rear seatback to the full upright position. 2. Fold the flap * 1 . 3. Lift up the rear side of the cargo cover * 2 to unlatch [...]

2-58 Instruments and controls SIC3865 The rear cargo cover * 1 can be removed from the lift gate. T o remove the rear cargo cover, open the lift gate then remove the clips * 2 with a suitable tool. WARNING . Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop. . Do not lea[...]

SIC3845 ROOF RACK (if so equipped) Always distribute the luggage evenly on the roof rack. Do not load more than 99 lb (45 kg) on the roof rails. Observe the maximum load limit shown on the cross- bars or roof carriers when you attac h them on the roof rails. Contact an INFINITI retailer for crossbar or other equipment information. Be careful that y[...]

2-60 Instruments and controls POWER WINDOWS WARNING . Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the win- dows. Use the window lock switch to prevent unexpected use of the power windows. . Do not leave children unattended inside the vehicle. They could unknowingly activate switch[...]

SIC3241 Passenger side power window switch The passenger side switch will open or close only the corresponding window. T o open or close the window, push down or pull up the switc h and hold it. SIC3285 Automatic operation The automatic function is available for the switch that has an mark on its surface. T o fully open or close the window, com- pl[...]

2-62 Instruments and controls If the windows do not close auto- matically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initi- alize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by oper- ating the power [...]

SIC3243 Sunshade The sunshade will open automatically when the moonroof is opened. However, it must be closed manually. Tilting the moonroof T o tilt up, first close the moonroof, then push the UP * 1 side of the moonroof switch and release it; it need not be held. T o tilt down the moonroof, push the DOWN * 2 side. Sliding the moonroof T o fully o[...]

2-64 Instruments and controls SIC3642 T o activate or deactivate the welcome light function, perform the following procedure. 1. Push the ignition switch to the ON position. 2. Open the driver ’ s side door. 3. Push the door handle request switch on the driver ’ s side door handle for more than 5 seconds with the driver ’ s door open. 4. A ch[...]

SIC3250 PERSONAL LIGHTS Rear Push the button as illustrated to turn the light on or off . SIC3251 INTERIOR LIGHT CONTROL SWITCH The interior light control switc h has three positions: ON, DOOR and OFF. ON position When the switc h is in the ON position * 1 the map lights and rear personal lights will illuminate. DOOR position When the switc h is in[...]

2-66 Instruments and controls OFF position When the switch is in the OFF position * 3 , the lights will not illuminate, regardless of the condition. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharg ed battery. SIC3869 The light on the vanity mirror will turn on when the cover on the vanity mir[...]

The HomeLink ® Universal Transceiver pro- vides a convenient way to consolidate the functions of up to three individual hand- held transmitters into one built-in device. HomeLink ® Universal T ransceiver: . Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and security systems. [...]

2-68 Instruments and controls JVI0428X 2 . Using both hands, simultaneously press and hold the desired HomeLink ® button and handheld transmitter but- ton. DO NOT release until the HomeLink ® indicator light * 1 flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. (The rapid flashing indicates s[...]

stand on your vehicle to perform the next steps. 4. At the receiver located on the garage door opener motor in the garage, locate the “ learn ” or “ smart ” button (the name and color of the button may vary by manufacturer but it is usually located near where the hanging anten- na wire is attac hed to the unit). If there is difficulty locat[...]

2-70 Instruments and contr ols mitted. For convenience, the hand-held transmitter of the device may also be used at any time. PROGRAMMING TROUBLESHOOT- ING If the HomeLink ® does not quic kly learn the hand-held transmitter information: . replace the hand-held transmitter bat- teries with new batteries. . position the hand-held transmitter with it[...]

FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer- ence rec eived, including interference that may cause undesire d operation. NOTE: Changes or modifications not expressly appr[...]

2-72 Instruments and contr ols MEMO[...]

3 Pre-driving c hecks and adjustments Keys .................................................................... 3-2 Intelligent Key ................................................. 3-2 V alet hand-off.................................................. 3-3 Doors .................................................................. 3-4 Locking with mech[...]

3-2 Pre-driving chec ks and adjustments A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see an INFINITI retailer for duplicates by using the key number. INFINITI does not record any key numbers so it is very important to keep track of [...]

— Do not change or modify the In- telligent Key . — Do not use a magnet key holder. — Do not place the Intelligent Key near an electric appliance such as a television set or personal computer. — Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the syst[...]

3-4 Pre-driving checks and adjustm ents WARNING . Always have the doors locked while driving. Along with the use of seat belts, this provides greater safet y in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep childr en and others from unintentionally opening the doors, and will help ke[...]

SPA1814 L OCKING WITH INSIDE L OCK KNOB T o lock the door individually, move the inside lock knob to the lock position * 1 . T o unlock, move the inside lock knob to the unlock position * 2 . Be sure not to leave the Intelligent Key inside the vehicle. SPA2300 L OCKING WITH POWER DOOR LOCK SWITCH Operating the power door lock switch will lock or un[...]

3-6 Pre-driving checks and adjustm ents 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more than 5 sec onds. 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition switch must be placed in the OFF and ON posit[...]

CAUTION . Be sure to carry the Intelligent Key with you when operating the vehicle. . Never leave the Intelligent Key in the vehicle when you leave the vehicle. The Intelligent Key is always communicat- ing with the vehicle as it receives radio waves. The Intelligent Key system trans- mits weak radio waves. Environmental conditions may interfere wi[...]

3-8 Pre-driving checks and adjustm ents . Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV , audio equipment and personal comput ers. If an Intelligent Key is lost or stolen, INFINITI recommends erasing the ID code of that Intelligent Key from the vehicle. This may prevent the unauthorized use of the Inte[...]

SPA2326 DOOR L OCKS/UNLOCK S PRECAU- TION . Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelli- gent Key is outside the vehicle. . After locking with the door handle request s[...]

3-10 Pre-driving checks and adjustment s SPA2779 SPA2780 When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver ’ s or front passenger ’ s) * A or the lift gate request switch * B within the range of operation. When you lock or unlock the doors or the lift gate, the hazard[...]

Lockout prot ection: T o prevent the Intelligent Key from being accidentally locked in the vehicle, loc kout protection is equipped with the Intelligent Key system. When the driver ’ s side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automati- cally unloc k[...]

3-12 Pre-driving checks and adjustment s switch on the instrument panel or lower part of the lift gate. See “ Lift gate ” (P .3-18). BA TTERY SA VER SYSTEM When all the following conditions are met for a period of time, the battery saver system will cut off the power supply to prevent battery discharge. . The ignition switch is in the ACC posit[...]

TROUBLESHOOTING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The SHIFT P warning appears on the display and the inside warning chime sounds con- tinuously or for a few seconds. The shift lever is not in the P (Park) position. Shift the shift lever to the P (Park) position. When shifting the shift l[...]

3-14 Pre-driving checks and adjustment s WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect air craft navigation and communication syst ems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored f[...]

Locking doors and fuel-filler door 1. Move the shift lever to the P (Park) position, push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you.* 2. Close all the doors and the lift gate. 3. Push the LOCK button * 1 on the Intelligent Key . 4. All the doors, the lift gate and fuel-filler door will loc k. 5. Th[...]

3-16 Pre-driving checks and adjustment s be operated when the ignition switch is in the ON position. Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button * 4 on the Intelligent Ke y for more than 1 second. 2. The theft warning alarm and headlights will [...]

Hazard indic ator and horn mode: DOOR LOCK DOOR UNLOCK Intelligent Key system (Using door handle or lift gate request switch) HAZARD - twice OUTSIDE CHIME - twice HAZARD - once OUTSIDE CHIME - once Remote keyless entry system (Using , or button) HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indic ator mode: DOOR LOCK DOOR UNLOCK Intel[...]

3-18 Pre-driving checks and adjustment s JVP0103X 1. Pull the hood lock release handle * 1 located below the instrument panel; the hood will then spring up slightly. 2. Pull the lever * 2 up at the front of the hood with your finger tips and raise the hood. 3. When closing the hood, slowly close the hood down to latch both the right and left locks.[...]

OPERA TING POWER LIFT GA TE T o operate the power lift gate, the shift lever must be in the P (Park) position. The power lift gate will not operate if the battery voltage is under approximately 11V . SPA2547 Power lift gate main switch The power lift gate operation can be turned on or off by the power lift gate main switch on the instrument panel. [...]

3-20 Pre-driving checks and adjustments SPA2463 Power lift gate button — Intelligent Key SPA2440 Power lift gate switch — Lift gate Power open When the lift gate is fully closed, the lift gate will fully open automatically by performing one of the following opera- tions: . Pushing the power lift gate switch * A on the instrument panel. . Pushin[...]

the ignition switc h is in the ON position. Auto reverse function The auto-reverse function enables the lift gate to automatically reverse when some- thing is caught in the lift gate as it is opening or closing. When the control unit detects an obstacle, the lift gate will reverse and return to the full open or full close position. If a second obst[...]

3-22 Pre-driving checks and adjustments SPA2880 * 1 Lift gate opener switc h * 2 Power lift gate switc h — Lift gate * 3 Power lift gate switch — Instrument panel * 4 Power lift gate main switch Middle stop function The power lift gate can be set to stop at a mid-open range. To activate the system, perform the following proc edures. 1. Press th[...]

function. However, this may result in minor personal injury if someone is behind the vehicle when the switch is activated, or damage to the lift gate. NOTE: . T o avoid damaging the lift gate system, do not manually for ce the lift gate to open or close when the lift gate is moving. When manually operating the lift gate from the full close or full [...]

3-24 Pre-driving checks and adjustments SPA2522 LIFT GA TE RELEASE LEVER If the lift gate cannot be opened with the door lock switch due to a discharged battery, follow these steps. 1. Remove the cover * A inside of the lift gate using a suitable tool. 2. Move the lever * B as illustrated to open the lift gate. Contact an INFINITI retailer as soon [...]

built-in safety valve needed for proper operation of the fuel system and emis- sion control system. An incorrect cap can result in a serious malfunction and possible injury. It could also cause the malfunction indicator light to come on. . Never pour fuel into the throttle body to attempt to start y our vehicle. . Do not fill a portable fuel contai[...]

3-26 Pre-driving checks and adjustments SPA2524 T o remove the fuel-filler cap: 1. Turn the fuel-filler cap counterclockwise to remove. 2. Put the fuel-filler cap on the cap holder * A while refueling. T o install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuel-filler tube. 2. Turn the fuel-filler cap clockwise until a sin[...]

WARNING . Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. . Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driver ’ s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or o[...]

3-28 Pre-driving checks and adjustments For more information, see “ Automatic drive positioner ” (P . 3-32). SPA2471 1. To block glare from the front, swing down the main sun visor * 1 . 2. To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side * 2 . 3. Slide the sun visor * 3 in or out as [...]

SPA2447 INSIDE MIRROR Adjust the height and the angle of the inside mirror to the desired position. SPA2422A T ype A SPA2450 T ype B Automatic anti-glare type The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically tu[...]

3-30 Pre-driving checks and adjustments For the HomeLink ® Universal Transceiver operation, see “ HomeLink ® Universal T ransceiver ” (P .2-67). SPA2214 OUTSIDE MIRRORS WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an acci[...]

SPA1732A Foldable outside mirrors CAUTION . Do not touch the mirrors while they are moving. Y our hand may be pinched, and the mirror may malfunction. . Do not drive with the mirrors stored. Y ou will be unable to see behind the vehicle. . If the mirrors were folded or unfolded by hand, there is a chance that the mirror will move forward or backwar[...]

3-32 Pre-driving checks and adjustments SIC3869 VANIT Y MIRROR T o use the front vanity mirror, pull down the sun visor and pull up the cover. The automatic drive positioner system has three features: . Entry/exit function . Seat synchroniz ation function . Memory storage ENTRY/EXIT FUNCTION This system is designed so that the driver ’ s seat and[...]

Initialize entr y/exit function If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing with a new fuse, open and close the driver ’ s door more than two times after the ignition switch is turned from the ON [...]

3-34 Pre-driving checks and adjustments holding the SET switc h for more than 10 seconds while the ignition switch is in the AC C position. The indicator lights on the memor y switches (1 and 2) will blink once when the function is canceled, and the indic ator lights will blink twice when the function is activated. Note that the indicator lights ma[...]

Selecting the memorized position 1. Move the shift lever to the P (Park) position. 2. Use one of the following methods to move the driver ’ s seat, the outside mirrors and the steering wheel. . Push the ignition switch to the ON position and push the memory switch (1 or 2) fully for at least 1 second. . Within 45 seconds of opening the driver ’[...]

3-36 Pre-driving checks and adjustments MEMO[...]

4 Monitor, climat e, audio, phone and voic e r ecogni- tion systems Safety note .......................................................... 4-3 Center multi-function control panel ...................... 4-3 How to use INFINITI controller.......................... 4-5 How to use touc h screen (models with navigation system) ..........................[...]

USB memory operation.................................. 4-77 Bluetooth ® streaming audio (models with navigation system) ........................................ 4-82 iPod ® player operation .................................. 4-86 CD/DVD/USB memory care and cleaning ....... 4-89 Steering-wheel-mounted controls for audio.... 4-90 Antenna ..........[...]

WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. . In case you notice any foreign object in the system hardwa[...]

4-4 Monitor, climate, audio, phone and voice recognition systems SAA1524 Models without navigation syst em 1. “ AUX ” button (P .4-54) 2. “ RADIO AM·FM ” band selector button (P .4-54) 3. INFINITI controller (P .4-5) 4. “ OFF ” brightness control and display ON/OFF button (P .4-9) 5. “ INFO ” vehicle information button (P .4-9) 6. [...]

HOW TO USE INFINITI C ONTROLLER Choose an item on the display using the main directional buttons * 2 (or additional directional buttons * 6 models with navi- gation system) or center dial * 3 , and push the ENTER button * 1 for operation. If you push the BACK button * 4 before the setup is completed, the setup will be canceled and/or the display wi[...]

4-6 Monitor, climate, audio, phone and voice recognition systems SAA2473 Example T ouch screen operation With this system, the same operations as those for the INFINITI controller are possi- ble using the touc h screen operation. Selecting the item: T ouch an item to select it. T o select the “ Audio ” settings, touch the “ Audio ” area * 1[...]

. Delete: Deletes the last character that has been input with one touch. Push and hold the button to delete all of the char- acters. . OK: Completes c haracter inputs. T ouch screen maintenance If you clean the display screen, use a dry, soft cloth. If additional cleaning is neces- sary, use a small amount of neutral detergent with a soft cloth. Ne[...]

4-8 Monitor, climate, audio, phone and voice recognition systems SAA2477 Models with navigation system JVH0179M Models without navigation syst em HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the display screen in menus. T o select each key item, highlight the preferred item using the INFINITI controller and push the ENTER butt[...]

HOW TO USE STA TUS BUTTON Y ou can chec k information related to the audio, climate control system, fuel con- sumption and navigation system (if so equipped) by pressing the ST A TUS button repeatedly. HOW TO USE BRIGHTNESS C ON- TROL AND DISPLAY ON/OFF BUTTON Push the “ OFF ” button to switch the display brightness to the daytime mode or the n[...]

4-10 Monitor, climate, audio, phone and voice recognition systems V ehicle information display 1. Push the INFO button on the control panel. 2. Select an item from the INFO menu. 3. After viewing or adjusting the informa- tion on the following screens, push the BACK button to return to the INFO menu. See the separate Navigation System Own- er ’ s[...]

Fuel Economy information The approximat e distance to empty, aver- age fuel economy and current fuel econo- my will be displayed for reference. T o reset the average fuel economy (Avg Fuel Econ), select the “ Reset Fuel Eco ” or “ Reset ” key . If the “ Fuel Eco History ” or “ View ” key is selected, the average fuel consumption his[...]

4-12 Monitor, climate, audio, phone and voice recognition systems the “ Select Units ” key (models with navi- gation system) with the INFINITI controller and push the ENTER button. In case of low tire pressure, LOW PRES- SURE information will be displayed on the screen. Chec k the pressure of all tires. Tire pressure rises and fal ls depending [...]

Maintenance information The maintenance intervals can be dis- played for the engine oil, oil filter, tire and other reminders. T o set a maintenance interv al, select a preferred item from the list. Y ou can also set to display a message to remind you that the maintenance needs to be performed. The following example shows how to set the engine oil [...]

4-14 Monitor, climate, audio, phone and voice recognition systems SAA3145 Others information (models with navigation system) The Others information display will appear when pushing the INFO button and select- ing the “ Others ” key . Navigation V ersion: For the details of this item, see the separate Navigation System Owner ’ s Man- ual. When[...]

HOW TO USE SETTING BUTTON The display as illustrated will appear when the SETTING button is pushed. Designs and items displayed on the screen may vary depending on the models. For navigation settings, refer to the sepa- rate Navigation System Owner ’ s Manual. SAA2485 Models with navigation system SAA2618 Models without navigation syst em Audio s[...]

4-16 Monitor, climate, audio, phone and voice recognition systems played. For some music, it may be difficult to realize the effect of this feature. DivX ® Registration C ode (models with navigation system): The registration code for a device that is used to download DivX ® files will be displayed on the screen. If a disc is loaded or a USB memor[...]

Guidance V olume: T o adjust the guidance voice volume, select the “ Guidance Volume ” and adjust it with the INFINITI controller. Y ou can also adjust the guidance voice volume by turning the VOLUME control knob while voice guidance is being an- nounced. Ringtone/Incoming Ca ll/Outgoing Call: For the details of these items, see “ Blue- tooth[...]

4-18 Monitor, climate, audio, phone and voice recognition systems When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off auto- matically 5 seconds after the operation is finished. T o turn on the screen, set this item to the ON position, or push and hold the “ OFF ” button. . Brig[...]

SAA2487 Cloc k settings (models with navi- gation system) The display as illustrated will appear when pushing the SETTING button and selecting the “ Others ” key , and then selecting the “ Cloc k ” key . The clock settings display cannot be operated while driving. Stop the vehicle in a safe place and apply the parking brake before setting t[...]

4-20 Monitor, climate, audio, phone and voice recognition systems SAA2489 Example Others settings (models with navi- gation system) The Others settings display will appear when pushing the SETTING button and selecting the “ Others ” key . The following items are available: . Comfort . Cloc k . Language & Units . V oice Recognition . Camera [...]

Lift Steering Wheel on Exit (if so equipped): When this item is turned on, the steering wheel moves upward for easy exit if the ignition switc h is in the LOCK position and the driver ’ s door is opened. After getting into the vehicle and pushing the ignition switch to the ACC position, the steering wheel moves to the previous position. Slide Dri[...]

4-22 Monitor, climate, audio, phone and voice recognition systems JVH0252X Models without navigation syst em The display illustrated will appear when pushing the SETTING button and selecting the “ Language & Units ” key . Select Language: Select the “ Select Language ” key. Choose “ English ” , “ Français ” or “ Español ” [...]

stop the vehicle in a safe location and apply the parking brak e. SAA2492 Full Screen Display: The full screen display will appear when selecting the “ Full Screen Display ” key . T o operate the Image Viewer or to change the settings, select the desired key using the INFINITI controller. . (Start) Select the “ ” key to start playing the sl[...]

4-24 Monitor, climate, audio, phone and voice recognition systems — Maximum Resolution: 2048 6 1536 pixels — Maximum Size: 2-MB — Colors: 32768 (15-bit) — Maximum File Name lengths: 253- Bytes — Maximum Folders: 500 — Maximum Images per Folder: 1024 . If an electronic devic e (suc h as a digital camera) is directly connected to the vehi[...]

SAA1896 HOW TO READ DISPLAYED LINES Guiding lines which indicate the vehicle width and distances to objects with re- ference to the bumper line * A are dis- played on the monitor . Distance guide lines: Indicate distances from the bumper. . Red line * 1 : approx. 1. 5 ft (0.5 m) . Y ellow line * 2 : approx. 3 ft (1 m) . Green line * 3 : approx. 7 f[...]

4-26 Monitor, climate, audio, phone and voice recognition systems SAA1897 HOW TO PARK WITH PREDICTIVE C OURSE LINES 1. Visually check that the parking space is safe before parking your vehicle. 2. The rearview of the vehicle is displayed on the screen * A as illustrated when the shift lever is moved to the R (Reverse) position. SAA1898 3. Slowly ba[...]

guide lines * D parallel to the parking space * C . 5. When the vehicle is parked in the space completely , move the shift lever to the “ P ” (Park) position and apply the parking brake. SAA1978 DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DISTANCES Backing up on a steep uphill When bac king up the vehicle up a hill, the distance guide lines and th[...]

4-28 Monitor, climate, audio, phone and voice recognition systems SAA1979 Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actual 3 ft (1 m) distance on th[...]

SAA1980 Backing up behind a projecting object The position * C is shown further than the position * B in the display. However, the position * C is actually at the same distance as the position * A . The vehicle may hit the object when bac king up to the position * A if the object projects over the actual backing up course. SAA2606 PREDICTIVE C OURS[...]

4-30 Monitor, climate, audio, phone and voice recognition systems HOW TO ADJUST SCREEN T o adjust the Display ON/OFF , Brightness, Tint, Color, Contrast and Black Level of the rearview monitor, push the SETTING button with the rearview monitor on, select the “ Display ” key on the screen and select the item key and adjust the level using the IN[...]

When you push the CAMERA button or shift the shift lever into the R (Reverse) position while the ignition switc h is in the ON position, the Around View Monitor oper- ates. The monitor displays various views of the position of the vehicle. Available views: . Bird-Eye View The surrounding view of the vehicle. . Front- Side View The view around and a[...]

4-32 Monitor, climate, audio, phone and voice recognition systems may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. . Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock. CAUTION Do not scratch[...]

: Shift the shift lever : Select the “ Change View ” key on the screen : Push the CAMERA button * A : Original screen before the Around View Monitor is operated * B : Rear view/bird-eye view screen * C : Rear view/front-side view screen * D : Rear-wide view screen * E : Front view/bird-eye view screen * F : Front view/front-side view screen * G[...]

4-34 Monitor, climate, audio, phone and voice recognition systems . When selecting the “ Change View ” ke y on the screen, the view on the screen will switch between the available views * 11 / * 13 / * 20 . . The view on the driver ’ s side or the wide view switches to the rear view * B / * C / * D when the shift lever is shifted into the R ([...]

SAA1840 Front view SAA1896 Rear view Front and rear view Guiding lines, which indicate the vehicle width and distances to objects with re- ference to the vehicle body line * A , are displayed on the monitor . Distance guide lines: Indicate distances from the vehicle body. . Red line * 1 : approx. 1. 5 ft (0.5 m) . Y ellow line * 2 : approx. 3 ft (1[...]

4-36 Monitor, climate, audio, phone and voice recognition systems . A line on the ground may be misaligned and is not seen as being straight at the seam of the views. The misalignment will increase as the line proceeds away from the vehicle. . Tire angle display does not indicate the actual tire angle JVH0265X The bird-eye view shows the overhead v[...]

the predictive course lines are shown at back of the vehicle. SAA1842 Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line * 1 shows the front part of the vehicle. The side-of-vehicle line * 2 shows the vehicle width including the outside mirror[...]

4-38 Monitor, climate, audio, phone and voice recognition systems JVH0322X Front-wide view JVH0321X Rear-wide view Front-wide/rear-wide view The front-wide/rear-wide view shows a wider area on the entire screen and allows the chec king of the blind corners on the right and left sides. The front-wide/rear- wide view displays an approximately 180- de[...]

DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DISTANCES Moving to a steep uphill When moving the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actual 3 ft (1 m) distance on the hill is the place * B . Note that [...]

4-40 Monitor, climate, audio, phone and voice recognition systems SAA1923 Moving near a projecting object The predictive course lines * A do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual moving co urse. SAA1980 Moving closer to a projecting object The position * C is shown further than t[...]

compressed-air brakes or a pneumatic drill may affect the function of the system; this may include reduced per- formance or a f alse activation. . This function is designed as an aid to the driver in detecting large stationar y objects to help avoid damaging the vehicle. . The system is not designed to prevent contact with small or moving objects. [...]

4-42 Monitor, climate, audio, phone and voice recognition systems JVH0266X When the “ ” * 1 is selected, the indicator * 2 will turn off and the sonar will be turned off temporarily. The Moving Object Detection (MOD) system will also be turned off at the same time. (See “ Moving Object Detection (MOD) ” (P .4-42).) When the switch is select[...]

safe to maneuver. . The MOD system does not have the function to detect the surrounding sta- tionary objects. JVH0289X Bird-eye view JVH0290X Front view / rear view JVH0291X Front-wide view / rear-wide view When the MOD system detects a moving object surrounding the vehicle, the yellow frame will be displayed on the view where the objects are detec[...]

4-44 Monitor, climate, audio, phone and voice recognition systems While the sonar is beeping, the MOD system does not c hime. A blue MOD icon * 3 is displayed in the view where the MOD system is operative. A gray MOD icon * 3 is displayed in the view where the MOD system is not operative. When the “ MOD ” key * 4 is selected, the MOD system wil[...]

View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied. JVH0323M AROUND VIEW MONITOR SETTINGS T o set up the Around View Monitor to your preferred settings, push the SETTING but- ton, select the “ Other ” key and then select the “ Camera ” key. Predictive C ourse Lines: When this item is turned to ON, the pr[...]

4-46 Monitor, climate, audio, phone and voice recognition systems JVH0269X Moving Object Detection (MOD): Activate or deactivate the Moving Object Detection (MOD) system. When this item is set to ON, the MOD is activated. When this item is turned to OFF (indicator turns off), the MOD system is deactivated. “ MOD ” * 2 will disappea r on the * 3[...]

JVH0271X When the “ [X] ” icon is displayed on the screen, the camera image may be receiving temporary electronic disturbances from surrounding devices. This will not hinder normal driving operation but the system should be inspected by an INFINITI retailer if it occurs frequently. OPERA TING TIPS . The screen displayed on the Around View Monit[...]

4-48 Monitor, climate, audio, phone and voice recognition systems SAA2149 C enter ventilators SAA2150 Side ventilators SAA2151 Rear ventilators Open or close, and adjust the air flow direction of ventilators. : This symbol indicates that the ventilators are closed. : This symbol indicates that the ventilators are open. WARNING . The air conditioner[...]

SAA2723 Models with navigation system SAA1520 Models without navigation syst em Y ou can individually set the driver and front passenger side temperature using each temperature control button. Monitor, climate, audio, phone and voice recognition systems 4-49[...]

4-50 Monitor, climate, audio, phone and voice recognition systems SAA1527 Without Advanced Cl imate Contr ol System (AC CS) SAA2153 With Advanced Climat e Control System (AC CS) 1. “ AUTO ” automatic climate control ON button/T emperature control dial (dri- ver side) 2. “ A/C ” air conditioner ON/OFF button 3. “ ” fan speed increase but[...]

AUTOMA TIC CLIMA TE C ONTROL Automatic operation Cooling and/or dehumidified heating (AUTO): This mode may be used all year round. The system works automatically to control the inside temperature, air flow distribution and fan speed after the preferred tempera- ture is set manually . 1. Push the “ AUTO ” button on. (The indicator on the button [...]

4-52 Monitor, climate, audio, phone and voice recognition systems Manual operation Fan speed contr ol: Push the fan speed increase “ ” or decrease “ ” buttons to manually con- trol the fan speed. Push the “ AUTO ” button to return to automatic co ntrol of the fan speed. T emperature contr ol: T urn the temperature control dial to set th[...]

SAA2734 Ion control: This unit generates highly concentrated Plasmacluster ® ions into the air blown from the ventilators and reduces odors absorbed into the interior trim. The high-density Plasmacluster ® ions gen- erated in the air conditioner ’ s air stream not only suppress airborne bacteria and reduce the adherence of odors to the interior[...]

4-54 Monitor, climate, audio, phone and voice recognition systems SAA1983 The sunload sensor * A on the instrument panel helps maintain a constant tempera- ture. Do not put anything on or around this sensor. IN-CABIN MICROFIL TER T o make sure that the air conditioner heats, defogs and ventilates efficiently, replace the filter according the specif[...]

equipment is used. These characteristics are completely normal in a given reception area, and do not indicate any malfunction in your INFINITI radio system. Reception conditions will constantly change because of vehicle movement. Buildings, terrain, signal distance and interference from other vehicles can work against ideal reception. Described bel[...]

4-56 Monitor, climate, audio, phone and voice recognition systems cles exist. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights. Satellite radio reception: When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly . This is not a malf[...]

tion. — 3.1 in (8 cm) discs — CDs that are not round — CDs with a paper label — CDs that are warped, scratched, or have abnormal edges . This audio system can only play pre- recorded CDs. It has no capabilities to record or burn CDs. . If the CD cannot be played, one of the following messages will be displayed. CHECK DISC: . Confirm that th[...]

4-58 Monitor, climate, audio, phone and voice recognition systems . Do not use the following CD/DVDs as they may cause the CD/DVD player to malfunction. — 3.1 in (8 cm) discs — CD/DVDs that are not round — CD/DVDs with a paper label — CD/DVDs that are warped, scratched or have abnormal edges — This audio system can only play prerecorded C[...]

USB (Universal Serial Bus) WARNING Do not connect or disconnect the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTION . Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage t[...]

4-60 Monitor, climate, audio, phone and voice recognition systems device and dehumidify or ventilate the USB player completely . . Do not connect a USB device if a connector, cable or USB port is wet. Allow the connector, cable, and USB port to dry c ompletely before connect- ing the USB device. (Wait for 24 hours or more until it is dry.) If the c[...]

. AAC/M4A — Advanced Audio Coding (AAC) is a lossy audio compression format. Audio files that have been encoded with AAC are generally smaller in size and deliver a higher quality of sound than MP3. . Bit rate — Bit rate denotes the number of bits per second used by a digital music file. The size and quality of a compressed digital audio file i[...]

4-62 Monitor, climate, audio, phone and voice recognition systems . The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. . Music playback order of compressed audio files is as illustrated.[...]

Specification c hart: Supported media CD, CD-R, CD-RW, DVD-ROM*5, DVD±R*5, DVD±RW*5, DVD±R DL*5, USB2.0 Supported file systems CD, CD-R, CD-RW, DVD-ROM*5, DVD±R*5, DVD±RW*5, DVD±R DL*5: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (pac ket writing) is not supported. * Files saved using the Live File System component (on a W[...]

4-64 Monitor, climate, audio, phone and voice recognition systems *3 Available codes depend on what kind of media, versions and information are going to be displayed. *4 When VBR files are played, the playback time may not be displayed correctly . *5 Models with navigation system.[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly. Check if the disc is scratc hed or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error[...]

4-66 Monitor, climate, audio, phone and voice recognition systems Compressed Video Files (models with navigation system) Explanation of terms: . DivX ® - DivX ® refers to the DivX ® codec owned by DivX, Inc. used for a lossy compression of video based on MPEG- 4. . AVI - AVI stands for Audio Video Interleave. It is a standard file format origina[...]

Requirement for Supporting Video Playback: Media CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02 +ISO9660), UDF1.5, UDF2.0 - ISO9660 Level 3 (pac ket writing) is not suppor ted. - Files saved using th[...]

4-68 Monitor, climate, audio, phone and voice recognition systems dation and wireless conn ection disrup- tion. . While an audio device is connected through a Bluetooth ® wireless connec- tion, the battery power of the device may discharge quicker than usual. . This system supports the Bluetooth ® Audio Distribution Profile (A2DP , AVRCP). . Wire[...]

No satellite radio reception is available unless a SiriusXM Satellite Radio subscrip- tion is active. The audio co ntrol buttons are also located on the center multi-function control panel. JVH0138X Models with navigation system 1. AM·FM·SA T radio band select button 2. DISC·AUX button SAA2922 Models without navigation syst em 1. AUX/Satellite r[...]

4-70 Monitor, climate, audio, phone and voice recognition systems activation signal after subscribing the SiriusXM Satellite Radio. After receiving the activation signal, an available channel list will be automatically updated in the radio. Push the ignition switch from LOCK to AC C to update the channel list. Audio main operation Head unit: The au[...]

. For SiriusXM Satellite Radio T urn the radio tuning knob to seek channels from all of the categories when any category is not selected. SEEK tuning/CA TEGORY (CA T): . For AM and FM radio Push the SEEK·CAT or TRACK button to tune from low to high or high to low frequencies and to stop at the next broadcasting station. . For SiriusXM Satellite Ra[...]

4-72 Monitor, climate, audio, phone and voice recognition systems stored as the new preset. . Customize Channel List Selects specific channels to skip while using the TUNE, SEEK/CATEGORY or Menu-Categories feature. . Favorite Artists & Songs Stores the current artist or song that is being played. T ouch the “ Alert ” key to be reminded when[...]

CD: . Disc title . T rack title CD with compressed audio files: . Folder title . File title . Song title . Album title . Artist Next/Previous T rack and Fast- Forward/Rewind: Push the FF or REW button for more than 1.5 seconds while a CD is being played to fast-forward or rewind through the track. When the button is released, the CD will return to [...]

4-74 Monitor, climate, audio, phone and voice recognition systems death. CAUTION . Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. . Do not allow the system to get wet. Excessive moisture such as spilled liquids may cause the system to ma[...]

SAA2497 Playing a DVD DISC·AUX button: Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watc hing the images. Push the DISC·AUX button on the instru- ment panel and turn the display to the DVD mode. When a DVD is loaded, it will be replayed automatically . The operation screen will be turned on when [...]

4-76 Monitor, climate, audio, phone and voice recognition systems SAA2498 Example DVD settings Select the “ Settings ” key to adjust the following settings. Key (DVD- VIDEO): Keys for the DVD menu operation are displayed. : Move the cursor to select a DVD menu. Enter: Enter the selected menu. Move: Change the display location by moving the oper[...]

DVD Language (D VD-VIDEO, VIDEO-CD): Select the “ DVD Language ” key to open the number entry screen. Input the number corresponding to the preferred language and select the “ OK ” key. The DVD top menu language will be changed to the one specified. Display: T o adjust the image quality of the screen, select the preferred adjustment items. [...]

4-78 Monitor, climate, audio, phone and voice recognition systems SAA2500 File selection (models with naviga- tion system) When there are both audio and movie files in the USB memory, the mode select screen is displayed. Select the preferred content to play . When there is only one type of file, the audio or movie operation screen is dis- played an[...]

When the REW button is pushed for less than 1.5 seconds after 3 sec onds from when the current trac k starte d playing, the beginning of the current track will be played. The INFINITI controller can also be used to select trac ks when the USB memory is being played. Folder selection: T o change to another folder in the USB memory, turn the folder s[...]

4-80 Monitor, climate, audio, phone and voice recognition systems ing to the movie playback mode. . Play Mode Select the preferred play mode. SAA2503 Movie file operation (models with navigation system) Park the vehicle in a safe location for the front seat occupants to operate the USB memory while watching the images. PLAY: When the DISC·AUX butt[...]

Skip (Previous c hapter) Select the “ ” key to skip the chapter(s) of the disc backward. The chapters will go back the number of times the “ ” ke y is selected. List: Select the “ List ” key on the movie file operation screen to display the file list. SAA2504 Example Settings: Select the “ Settings ” key to adjust the following sett[...]

4-82 Monitor, climate, audio, phone and voice recognition systems Bluetooth ® STREAMING AUDIO (models with navigation system) Y our INFINITI is equipped with Bluetooth ® Streaming Audio. If you have a compatible Bluetooth ® device with streaming audio (A2DP profile), you can set up the wireless connection between your Bluetooth ® de- vice and t[...]

SAA2505 Connecting procedure 1. Push the SETTING button and select the “ Bluetooth ” key. SAA2506 2. Select the “ Connect Bluetooth ” key . SAA2507 3. A confirmation screen will be dis- played. Select “ No ” . Note: Selecting “ Ye s ” will only connect the hands free phone portion of a Bluetooth ® device. Monitor, climate, audio, p[...]

4-84 Monitor, climate, audio, phone and voice recognition systems SAA3005 4. When a passkey appears on the screen, operate the compatible Bluetooth ® audio device to enter the passkey. The pairing procedure for the audio device varies according to eac h audio device. See the Bluetooth ® audio Owner ’ s Manual for details. When pairing is comple[...]

when the current track started playing, the beginning of the current track will be played. The INFINITI controller can also be used to select tracks when the Bluetooth ® audio play mode screen is shown on the display. ( “ Bluetooth audio ” will be indicated on the header of the screen.) REPEA T (RPT), RANDOM (RDM): T o change the play mode, pu[...]

4-86 Monitor, climate, audio, phone and voice recognition systems Connect ed Devices: Registered devices are shown on the list. Select a Bluetooth device from the list, the following options will be available. . Select Select “ Select ” to connect the selected device to the vehicle. If there is a different device currently connected, the select[...]

* iPod ® is a trademark of Apple Inc., registered in the U.S. and other countries. CAUTION . Depending on size and shape of iPod ® and iPod ® cable, the console lid may not fully close. Do not force console lid closed as this may damage iPod ® and iPod ® cable. . Do not force the iPod ® cable into the USB por t. Inserting the iPod ® cable ti[...]

4-88 Monitor, climate, audio, phone and voice recognition systems display changes to the iPod ® mode. Interface: The interfac e for iPod ® operation shown on the vehicle center display is similar to the iPod ® interface. Use the INFINITI controller and the ENTER or BACK button to play the iPod ® with your favor ite settings. The following items[...]

SAA0451 CD/DVD/USB MEMORY CARE AND CLEANING CD/DVD . Handle a CD/DVD by its edges. Never touch the surface of the disc. Do not bend the disc. . Always place the discs in the storage case when they are not being used. . T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circul[...]

4-90 Monitor, climate, audio, phone and voice recognition systems 1. Audio source switc h 2. Menu control switch (models with navigation system) or audio tuning switch (models without navigation system) 3. Back switc h 4. V olume control switch STEERING-WHEEL -MOUNTED C ON- TROLS FOR AUDIO Menu control switch (models with navigation system) or audi[...]

Bluetooth streaming audio (models with navigation system): . Tilting up/down for less than 1.5 seconds will scroll up or down through the track numbers. BACK switc h Push this switc h to go bac k to the previous screen or canc el the selection if it is not completed. V olume control switc hes Push the upper (+) or lower ( − ) side switch to incre[...]

4-92 Monitor, climate, audio, phone and voice recognition systems — The vehicle enters an automatic car wash. — The vehicle enters a garage with a low ceiling. — The vehicle is covered with a car cover. . Always properly tighten the antenna rod during installation. Otherwise, the an- tenna rod may break during vehicle operation. When installi[...]

WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. . If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the r oad to a safe location and s[...]

4-94 Monitor, climate, audio, phone and voice recognition systems . Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption. . While a cellular phone is connected through the Bluetooth ® wireless con- nection, the battery powe[...]

SAA2248 C ONTROL BUTTONS 1. T ALK button 2. PHONE SEND button JVH0473X C ONNECTING PROCEDURE 1. Push the button, and select the “ Connect Phone ” key. SAA2520 2. When a PIN code appears on the screen, operate the compatible Blue- tooth ® cellular phone to enter the PIN code. The connecting procedure of the cellu- lar phone varies according to [...]

4-96 Monitor, climate, audio, phone and voice recognition systems Phone menu display . PHONE SELECTION Up to 5 cellular phones can be registered to the system. To switch to connect another cellular phone, push button and select the “ Connected Phones ” key. The regis- tered cellular phones are shown on the list. If you select a cellular phone t[...]

JVH0476X 5. Select the “ Voicetag ” key to record a name to speak when using the INFINITI V oice Recognition system. 6. Select the “ Store ” key and prepare to speak the name after the tone. 7. When the voicetag is successfully saved, select the “ OK ” key to save the Quick Dial entry. 8. After the Quick Dial entry is saved, it will sho[...]

4-98 Monitor, climate, audio, phone and voice recognition systems JVH0478X The following editing items are available: . Entry # Changes the displayed number of the selected entry. . Name Edit the name of the entry using the keypad displayed on the screen. . Number Edit the phone number using the key- pad displayed on the screen. . T ype Select an i[...]

JVH0495X 5. Select the “ Call ” key to start dialing the number. There are different methods to make a call. Select one of the following options instead of “ Phonebook ” in step 2 above. . Quick Dial Select an entry stored in the Quick Dial. . Call History Select an outgoing, incoming or missed call downloaded from your cell phone (dependin[...]

4-100 Monitor, climat e, audio, phone and voice rec ognition systems . Hold Call Put an incoming call on hold. . Reject Call Reject an incoming call. T o finish the call, perform one of the following procedures listed below. 1. Select the “ Hang up ” key . 2. Push the button on the steering wheel. SAA3587 DURING A CALL There are some options av[...]

JVH0480X PHONE SETTING T o set up the Bluetooth ® Hands-Free Phone System to your preferred settings, push the SETTING button on the instrument panel and select the “ PHONE ” key. Edit Quic k Dial T o edit the Quick Dial, use the same procedure as described in “ Quick Dial ” (P .4-96). Delete Phonebook The Quick Dial entries can be deleted[...]

4-102 Monitor, climat e, audio, phone and voice rec ognition systems TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are encountered, try the following solutions. Where the solutions are listed by number, try eac h solution in turn, starti ng with number 1, until the problem is resolv[...]

WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. . If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the r oad to a safe location and s[...]

4-104 Monitor, climat e, audio, phone and voice rec ognition systems may be difficult to hear the other person ’ s voice during a call. . Immediately after the ignition switch is pushed to the “ ON ” position, it may be impossible to receive a call for a short period of time. . Do not place the cellular phone in an area surrounded by metal or[...]

Bluetooth ® is a trademark owned by Bluetooth SIG, Inc., and licensed to Visteon Cor- poration. SAA2634 C ONTROL BUTTONS 1. PHONE SEND button Push the button to initiate a V oice Recognition (VR) session or answer an incoming call. Y ou can also use the button to skip through system feed- back and to enter commands during a call. 2. PHONE END butt[...]

4-106 Monitor, climat e, audio, phone and voice rec ognition systems . Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traf- fic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands cor- rectly. . Wait until a tone sounds before speak- ing a c[...]

command recogniti on mode . 4. The system acknowledges the com- mand and announces the next set of available commands. 5. After the tone sounds, speak the phone number. 6. When you have finished speaking the phone number, the system repeats it back and announces the available commands. 7. After system responds, speak “ Dial ” and the system dia[...]

4-108 Monitor, climat e, audio, phone and voice rec ognition systems cent Calls, Connect Phone or Help ” . 3. Give your instructions to the system by saying: “ Dial John ” for example ( “ John ” must have been previously set as a voice tag for John ’ s phone number) or “ Dial One ” if John is classified as one in the phonebook. If t[...]

List of voice co mmands: COMMAND ACTION “ Call/Dial ”“ <name> ” Dials the specified <name>. “ Call/Dial ”“ Redial ” Dials the last number. “ Call ”“ <number> ” Dials the specified <number>. “ Phonebook ”“ Number ”“ <name> ” Displays the specified <name> in the phonebook. “ Ph[...]

4-110 Monitor, climat e, audio, phone and voice rec ognition systems SAA2575 P AIRING PROCEDURE Up to 5 cellular phones can be registered. 1. Push the button on the steering wheel. The system announces the available commands. 2. Speak: “ Connect Phone ” . The system acknowledges the command and an- nounces the next set of available commands. SA[...]

SAA2578 5. The system asks the user to speak a name for the phone. Speak: “ Ye s ” . The system acknowl- edges the command and registers the cellular phone. If the name is too long or too short, the system tells the user, then prompts the user for a name again. Also, if more than one phone is connected and the name sounds too much like a name a[...]

4-112 Monitor, climat e, audio, phone and voice rec ognition systems SAA2580 MAKING A CALL T o make a call, follow the procedures below. 1. Push the button on the steering wheel. A tone will sound. 2. Speak: “ Call ” . The system acknowl- edges the command and announces the next set of available commands. 3. Speak the registered person ’ s na[...]

call. . “ Mute on/off ”— Use the Mute com- mand to mute the user ’ s voice so the other party cannot hear it. Use the mute command again to unmute the user ’ s voice . . “ Transfer Handset ”— Use the T ransfer Handset command to transfer the call from the Bluetooth ® Hands-Free Phone System to a cellular phone when privacy is desir[...]

4-114 Monitor, climat e, audio, phone and voice rec ognition systems SAA2583 Phonebook . (a name) Use the name command to seek the name and locations registered in the phonebook in alphabetical order. When the system acknowledges the alphabet the user spoke, the system announces all registered names and locations beginning with that alphabet. Playb[...]

SAA2584 Recent C alls . Incoming Use the Incoming command to make a call viewing the list of incoming calls. . Missed Use the Missed co mmand to make a call viewing the list of missed calls. . Outgoing Use the Outgoing command to make a call viewing the list of outgoing calls. . Redial Use the Redial comma nd to dial the last outgoing call. . Callb[...]

4-116 Monitor, climat e, audio, phone and voice rec ognition systems existing phone. If the user tries to connect a phone that has already been connected to the vehicle system, the system announces the name that the phone is already using. The connecting procedure will then be cancelled. The Add Phone command is not avail- able when the vehicle is [...]

will prompt you to overwrite one. Follow the instructions provided by the system. 7. When preparation is complete and you are ready to begin, press the button. 8. The speaker adaptation mode will be explained. Follow the instructions pro- vided by the system. 9. When training is finished, the system will tell you an adequate number of phrases have [...]

4-118 Monitor, climat e, audio, phone and voice rec ognition systems INFINITI Voice Recognition allows hands- free operation of the Phone, Navigation, Information and Audio systems in one of two modes, Standard Mode or Alternate Command Mode. In Standard Mode, commands that are available are always shown on the display and announced by the system. [...]

SAA2530 4. Select the “ Alternate Command Mode ” key. 5. The indicator turns off and the Stan- dard Mode activates. Displaying user guide If you use the INFINITI Voice Recognition system for the first time or you do not know how to operate it, you can display the User Guide for confirmation. Y ou can confirm how to use voice com- mands by acces[...]

4-120 Monitor, climat e, audio, phone and voice rec ognition systems SAA2532 Getting Started Before using the INFINITI Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Started section of the User Guide. 1. Select the “ Getting Started ” key . 2. Y ou can confirm the page by scrolling the sc[...]

SAA2533 Useful tips for correct operation Y ou can display useful speaking tips to help the system recognize your voice commands correc tly. Select “ Help on Speaking ” to start display. USING THE SYSTEM Initialization When the ignition switch is pushed to the ON position, INFINITI Voice Recognition is initialized, which may take up to one minu[...]

4-122 Monitor, climat e, audio, phone and voice rec ognition systems SAA2167 Giving voice commands 1. Push the TALK switch located on the steering wheel. SAA2535 2. A list of commands appears on the screen, and the system announces, “ Would you like to access Phone, Navigation, Information, Audio or Help? ” . 3. After the tone sounds and the ic[...]

steering switch or use the audio system volume knob while the system is making an announcement. How to speak numbers: INFINITI V oice Recognition requires a cer- tain way to speak numbers when giving voice commands. Refer to the following examples. General rule Only single digits 0 (zero) to 9 can be used. (For example, if you would like to say 500[...]

4-124 Monitor, climat e, audio, phone and voice rec ognition systems Command List Category C ommand: Command Action Phone Operates the Phone function Navigation Operates the Navigation function Information Displays the vehicle Information function Audio Operates the Audio function. Help Displays User Guide . Phone Command: Command Action Dial Numbe[...]

Command Action Previous Destinations Sets a route to a previous destination. . Information Command: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Traffic Information Turns the traffic information system ON and OFF . Tire Pressure Displays tire pressure information. Where am I? Displays [...]

4-126 Monitor, climat e, audio, phone and voic e rec ognition systems V oice command examples T o use the INFINITI Voice Recognition function, speaking one command is some- times sufficient, but at other times it is necessary to speak two or more com- mands. As examples, some additional basic operations by voice commands are described here. For nav[...]

JVH0481X 4. Speak “ Dial Number ” . SAA2537 5. Speak “ 800 ” . Selecting the “ Manual Controls ” ke y switches the screen to the keypad to input the phone number manually. SAA2538 6. The system announces, “ Please say the next three digits or dial, or say change number. ” 7. Speak “ 662 ” . Monitor, climate, audio, phone and voi[...]

4-128 Monitor, climat e, audio, phone and voice rec ognition systems SAA2539 8. The system announces, “ Please say the last four digits ” or s ay change number. 9. Speak “ 6200 ” . SAA2540 10. The system announces, “ Dial or Change Number? ” 11. Speak “ Dial ” . 12. The system makes a call to 800-662- 6200. NOTE: . Y ou can also spe[...]

SAA2167 Example 2 - Placing an international call to the phone number 011-81-111-222- 3333: 1. Push the TALK switch located on the steering wheel. SAA2535 2. The system announces, “ Would you like to access Phone, Navigation, Informa- tion, Audio or Help? ” 3. Speak “ Phone ” . JVH0481X 4. Speak “ International Call ” . Monitor, climate[...]

4-130 Monitor, climat e, audio, phone and voice rec ognition systems SAA2541 5. Speak “ 011811112223333 ” . SAA2542 6. Speak “ Dial ” . 7. System makes a call to 011-81-111- 222-3333. NOTE: Any digit input format is available in the International Number input process. INFINITI VOICE RECOGNITION AL - TERNA TE C OMMAND MODE The following sect[...]

JVH0137M Activating Alternate C ommand Mode When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode. 1. Push the SETTING button on the instru- ment panel. 2. Highlight the “ Others ” key . 3. Highlight the “ V oice Recognition ” key. SAA2543 4 . Highlight the “ Alternate Command Mode ” key .[...]

4-132 Monitor, climat e, audio, phone and voice rec ognition systems SAA2545 5. Select a category from the list. JVH0483X 6. Select an item. 7. If necessary, scroll the screen using the INFINITI controller to view the entire list. 8. Press the BACK button to return to the previous screen.[...]

Command List Phone C ommands: Command Action Dial Number Makes a call to a spoken phone number. Quick Dial Makes a call to a contact that is stored in the Quick Dial. Phonebook Makes a call to a contact that is stored in the mobile phone. Call History Incoming Calls Makes a call to the incoming c all number. Outgoing Calls Makes a call to the diale[...]

4-134 Monitor, climat e, audio, phone and voice rec ognition systems Navigation C ommands: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle locatio[...]

Information C ommands: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Where am I? Displays your current location. Traffic Information T urns the traffic information system ON and OFF . Tire Pressure Displays tire pressure information. Weather Information Displays weather information. Wea[...]

4-136 Monitor, climat e, audio, phone and voice rec ognition systems Audio C ommands: Command Action CD Starts to play a CD. FM Turns to the FM band, selecting the station last played. AM Turns to the AM band, selecting the station last played. XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played. USB Turns on the USB me[...]

Help C ommands: Command Action Command List Navigation Commands Displays the navigation command list. Phone Commands Displays the phone command list. Audio Commands Displays the audio command list. Information Commands Displays the information command list. Help Commands Displays the help command list. User Guide Displays the User Guide. Speaker Ad[...]

4-138 Monitor, climat e, audio, phone and voic e rec ognition systems General C ommands: Command Action Go back C orrects the last recognition result to return to the previous screen Exit Cancels V oice Recognition[...]

SAA2547 Displaying user guide Y ou can confirm how to use voice com- mands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. Select the “ Others ” key using the INFINITI controller and push the ENTER button. 3. Highlight the “ V[...]

4-140 Monitor, climat e, audio, phone and voice rec ognition systems . When the air conditioner is in the AUTO mode, the fan speed decreases auto- matically for easy recognition. . Wait until a tone sounds before speak- ing a command. . Speak in a natural voice without paus- ing between words. SAA2167 Giving voice command 1. Push and release the T [...]

Repeat the command in a clear voice. . Push the BACK button once to return to the previous screen. . If you want to cancel the command, push and hold the TALK switch for 1 second. The message “ V oice can- celed ” will be announced. . T o skip the voice guidance function and give the command immediately , press the TALK switch to interrupt the [...]

4-142 Monitor, climat e, audio, phone and voice rec ognition systems SAA2549 Speaker adaptation function (for Alternate C ommand Mode) The voice recognition system has a func- tion to learn the user ’ s voice for better voice recognition performance. The system can memorize the voices of up to three persons. Having the system learn the user ’ s[...]

SAA2552 8. The system requests that you repeat a command after a tone. 9. After the tone sounds and the icon on the screen changes from to , speak the command that the system requested. 10. When the system has recognized the voice command, the voice of the user is learned. Push the switch or BACK button to return to the previous screen. If the syst[...]

4-144 Monitor, climat e, audio, phone and voice rec ognition systems Minimize voice feedback (for Alter- nate C ommand Mode) T o minimize the voice feedback from the system, perform the following steps. 1. Push the SETTING button on the instru- ment panel. 2. Select the “ Others ” key . 3. Select the “ V oice Recognition ” key. 4. Select th[...]

TROUBLESHOOTING GUIDE The system should respond co rrectly to all voice commands without difficulty . If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try eac h solution in turn, starti ng with number one, until the problem is resolved. Symptom/error message S[...]

4-146 Monitor, climat e, audio, phone and voice rec ognition systems MEMO[...]

5 Starting and driving Precautions when starting and driving ................. 5-3 Exhaust gas (carbo n monoxide) ....................... 5-3 Three-way catalyst........................................... 5-3 Tire Pressure Monitoring Sys tem (TPMS).......... 5-4 Avoiding collision and rollover......................... 5-6 On-pavement and off-road dr[...]

Distance C ontrol Assist (DCA) system (if so equipped) ..................................................... 5-54 Precautions on Distance Control Assist system ................................................ 5-55 Distance C ontrol Assist operation .................. 5-56 Forward Collision Warning (FCW) system (if so equipped) .....................[...]

WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quick ly become high enough to caus[...]

5-4 Starting and driving cause a fire. CAUTION . Do not use leaded gasoline. Deposits from leaded gasoline seriously reduce the three-way catalyst ’ s ability to help reduce exhaust pollutants. . Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or elec- trical systems can cause overrich fuel flow into the three-way catalys[...]

Additional information . The TPMS does not monitor the tire pressure of the spare tire. . The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving). . The low tire pressure warning light does not automatically turn [...]

5-6 Starting and driving and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. C ontact your INFINITI retailer as soon as possible for tire replacement and/or system resetting. . Replacing tires with those not originally specified by INFINITI could affect the proper operation of the [...]

and avoid driving when tired. Never drive when under the influence of alcohol or drugs (including prescription or over-the- counter drugs which may cause drowsi- ness). Always wear your seat belt as outlined in the “ Seat belts ” (P .1-11) of this manual, and also instruct your passengers to do so. Seat belts help reduce the risk of injury in c[...]

5-8 Starting and driving RAPID AIR PRESSURE LOS S Rapid air pressure loss or a “ blow-out ” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflated tires. Rapid air pressure loss can affect the handling and stability of the vehicle, especially at [...]

Don ’ t drive if your ability to operate your vehicle is impaired by alcohol, drugs, or some other physical condition. DRIVING SAFET Y PRECAUTIONS Y our INFINITI is designed for both normal and off-road use. However, avoid driving in deep water or mud as your INFINITI is mainly designed for leisure use, unlike a conventional off-road vehicle. Rem[...]

5-10 Starting and driving by strong side winds. Slower speeds ensure better vehicle control. . Do not drive beyond the performance capability of the tires, even with AWD engaged. . For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running. Doing s[...]

WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed 3 consecutive times or the ignition switch is pushed and held for more than 2 seconds.) If the engine stops while the vehicle is being driven, this could lead to a crash and serious injury[...]

5-12 Starting and driving SSD1021 PUSH-BUTTON IGNITION SWITCH OPERA TION When the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change as follows: . Push center once to change to AC C. . Push center two times to change to ON. . Push center three times to change to OFF . (No position illuminates.) . [...]

CAUTION Do not leave the vehicle with the push- button ignition switch in ACC or ON posi- tions when the engine is not running for an extended period. This can discharge the battery. EMERGENCY ENGINE SHUT OFF T o shut off the engine in an emergency situation while driving perform the follow- ing procedure: . Rapidly push the push-button ignition sw[...]

5-14 Starting and driving . Make sure the area around the vehicle is clear. . Check fluid levels such as engine oil, coolant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel. . Check that all windows and lights are clean. . Visually inspect tires for their appear- ance and condition. Also check tires f[...]

5. To stop the engine, shift the shift lever to the P (Park) position and push the ignition switc h to the OFF position. NOTE: Care should be taken to avoid situations that can lead to potential battery dis- charge and potential no-start conditions such as: 1. Installation or extended use of electro- nic accessories that consume battery power when [...]

5-16 Starting and driving Sport) while vehicle is moving rearwar d. Failure to do so could cause you to lose control and have an accident. CAUTION . Except in an emergency, do not shift to the N (Neutral) position while driving. C oasting with the transmission in the N (Neutral) position may cause serious damage to the transmission. . When stopping[...]

position. CAUTION Use this position only when the vehicle is completely stopped. R (Reverse): Use this position to back up. Always be sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed and the shift lever button pushed in to move the shift lever from the P (Park) position, the N (Neut[...]

5-18 Starting and driving transmission shifts to the lower range. When canceli ng the manual shift mode, return the shift lever to the D (Drive) position. The transmission returns to the normal driving mode. When you pull the paddle shifter (if so equipped) while in the D (Drive) position, the transmission will shift to the upper or lower range tem[...]

should return to its normal operating condition. If it does not return to its normal operating condition, have an INFINITI retailer check the transmission and repair if necessary. SSD0775 Shift loc k release If the batter y charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed a[...]

5-20 Starting and driving Contr ol on downhill roads: The adaptive shift control system shifts to a low gear that suits the degree of the slope, and uses the engine braking to reduce the number of times that the brake must be used. Contr ol on winding roads: A low gear is maintained on continuous curves that involve repeated acceleration and decele[...]

SPA2331 T o apply: Fully depress the parking brake pedal * 1 . T o release: 1. Firmly apply the foot brake * 2 . 2. Depress the parking brake pedal * 1 and the parking brake will be released. 3. Before driving, be sure the brake warning light goes out. The Lane Departure Warning (LDW) sys- tem/Lane Departu re Prevention (LDP) sys- tem will operate [...]

5-22 Starting and driving markers on the traveling lane using the camera unit * 1 located above the inside mirror. When the camera unit detects that the vehicle is traveling close to either the left or the right of the traveling lane, the lane departure warning light * 2 on the instrument panel blinks in orange and a warning chime sounds. When the [...]

. When traveling close to the vehicle in front of you, which obstructs the lane camera unit detection range. . When rain, snow or dirt adheres to the windshield in front of the lane camera unit. . When the headlights are not bright due to dirt on the lens or if the aiming is not adjusted properly . . When strong light enters the lane camera unit. ([...]

5-24 Starting and driving systems ON indicator * 1 on the warning systems switch illuminates. To cancel the LDW system, push the warning systems switch. The warning systems ON indicator will turn off. T o turn on the system, push the warning systems switc h again. When the warning systems switch is pushed, the FCW system will also turn on or off si[...]

— When driving on roads where the lane width is too narro w. — When driving without normal tire conditions (for example, tire wear, low tire pressure, installation of spare tire, tire chains, non-standard wheels). — When the vehicle is equipped with nonoriginal brake parts or suspen- sion parts. — When you are towing a trailer. . If the LDP[...]

5-26 Starting and driving SSD0672 LDP ON indic ator light (green)/ W arning light (orange) LDP system operation The LDP system provides a lane departure warning and brake control assistance when the vehicle is driven at speeds of approxi- mately 45 MPH (70 km/h) and above. When the vehicle approaches either the left or the right side of the traveli[...]

system will not turn on even if the dynamic driver assistance switch is pushed to on. T o set the system to on or off on the display, see “ Setting LDP system to ON/OFF ” (P . 5- 27). SSD0884 SSD0885 Setting LDP system to ON/OFF: 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI c[...]

5-28 Starting and driving SSD0886 3. To set the LDP system to on or off, highlight the “ Lane Departure Preven- tion ” key, select ON or OFF and push the ENTER * 2 button. If both the LDP and DCA systems are set to OFF on the display, when the dynamic driver assistance switch is pushed, the LDP ON indicator light and the Distance Control Assist[...]

T emporary disabled status at high tem- perature: If the vehicle is parked in direct sunlight under high temperature conditions (over approximately 104 8 F (40 8 C)) and then the LDP system is turned on, the LDP system may be deactivated automatically. The LDP ON indicator (green) will blink. When the interior temperature is reduced, the system wil[...]

5-30 Starting and driving PRECAUTIONS ON CRUISE CONTROL . If the cruise control system malfunc- tions, it will cancel automatically. The SET indicator on the dot matrix crystal display will then blink to warn the driver. . If the engine coolant temperature be- comes excessively high, the cruise control system will be canceled auto- matically. . If [...]

C OAST/SET switch and release it. (The CRUISE SET indicator will come on in the instrument panel.) T ake your foot off the accelerator pedal. Y our vehicle will main- tain the set speed. . T o pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. . The vehicle may not m[...]

5-32 Starting and driving The Intelligent Cruise Control (ICC) system maintains a selected distance from the vehicle in front of you within the speed range of 0 to 90 MPH (0 to 144 km/h) up to the set speed. The set speed can be selected by the driver between 20 to 90 MPH (32 to 144 km/h). The vehicle travels at a set speed when the road ahead is c[...]

SSD0913 1. V ehicle-to-vehicle distance control mode 2. Conventional (fixed speed) cruise con- trol mode Push the MAIN switc h * A to choose the cruise control mode between the vehicle- to-vehicle distance control mode * 1 and the conventional (fixed speed) cruise con- trol mode * 2 . T o choose the vehicle-to-vehicle distance control mode * 1 , qu[...]

5-34 Starting and driving JVS0124X PRECAUTIONS ON VEHICLE-TO- VE- HICLE DIST ANCE C ONTROL MODE The system is intended to enhance the operation of the vehicle when following a vehicle traveling in the same lane and direction. If the distance sensor * A detects a slower moving vehicle ahead, the system will reduce the vehicle speed so that your vehi[...]

conditions. T o avoid accidents, never use the Intelligent Cruise Control system under the following conditions: — On roads where the traffic is heavy or there are sharp cur ves — On slippery road surfaces such as on ice or snow, etc. — During bad weather (rain, fog, snow, etc.) When the windshield wiper is oper- ated at the low speed (LO) or[...]

5-36 Starting and driving traveling ahead. The sensor generally detects the signals returned from the reflectors on a vehicle ahead. Therefore, if the sensor cannot detect the reflector on the vehicle ahead, the IC C system may not maintain the selected distanc e. The following are some conditions in which the sensor cannot detect the signals: . Wh[...]

standstill with a warning chime. . When the vehicle traveling ahead has moved out from its lane of travel, the vehicle-to-vehicle distance control mode accelerates and maintains vehi- cle speed up to the set speed. The ICC system does not control vehicle speed or warn you when you approach stationary and slow moving vehicles. Y ou must pay attentio[...]

5-38 Starting and driving SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the IC C sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the ICC system to decelerate or accelerate the vehicle. The detection of v[...]

SSD0914 Intelligent cruise c ontrol switch The system is operated by a MAIN switch and four control switches, all mounted on the steering wheel. 1. ACCELERA TE/RESUME switch: Resumes set speed or increases speed incrementally. 2. COAST/SET switch: Sets desired cruise speed, reduces speed incrementally . 3. CANCEL switch: Deactivates the system with[...]

5-40 Starting and driving 4. Indicates your vehicle 5. Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is displayed in km/h. 6. Intelligent Cruise Control system warn- ing light (orange): The light comes on if there is a malfunction in the IC C system. SSD0607 When the ignition switch is pushed to the ON[...]

SSD0916 T o set cruising speed, accelerate your vehicle to the desired speed, push the COAST/SET switc h and release it. (V ehicle ahead detection indicator, set distance indicator and set vehicle speed indicator come on.) T ake your foot off the accelerator pedal. Y our vehicle will maintain the set speed. SSD0784 When the COAST/SET switch is push[...]

5-42 Starting and driving SSD0614 When the COAST/SET switch is pushed under the following conditions, the system cannot be set. A warning chime will sound and the ICC indicators will blink. . When the SNOW mode switc h is ON (T o use the ICC system, turn off the SNOW mode switch, push the MAIN switch to turn off the ICC and reset the ICC switch by [...]

SSD0610 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation WARNING Normally when controlling the distance to a vehicle ahead, this system automatically accelerates or decelerates your vehicle according to the speed of the vehicle ahead. Depress the accelerator to properly accel- erate your vehicle [...]

5-44 Starting and driving the IC C system is in operation, the system controls the distance to that vehicle. When a vehicle is no longer detected under approximately 15 MPH (24 km/h), the system will be can celed. SSD0611 When passing another vehicle, the set speed indicator will flash when the vehicle speed exceeds the set speed. The vehicle detec[...]

. Lightly tap the brake pedal. When the vehicle attains the desired speed, push the C OAST/SET switch and release it. . Push and hold the COAST/SET switch. The set vehicle speed will decrease by approximately 5 MPH (5 km/h for Canada). . Push, then quic kly release the COAST/ SET switc h. Each time you do this, the set speed will decrease by approx[...]

5-46 Starting and driving SSD0613C . The distance to the vehicle ahead will change according to the vehicle speed. The higher the vehicle speed, the longer the distance. . If the engine is stopped, the set distance becomes “ long ” . (Each time the engine is started, the initial setting becomes “ long ” .) Approach warning If your vehicle c[...]

SSD0284A NOTE: The approach warning chime may sound and the system display may blink when the ICC sensor detects some reflectors * A which are fitte d on vehicles in other lanes or on the side of the road. This may cause the IC C system to decelerate or accelerate the vehicle. The IC C sensor may detect these reflectors when the vehicle is driven o[...]

5-48 Starting and driving SSD0614 Warning light and display Condition A: Under the following conditions, the Intelli- gent Cruise Control system is automatically canceled. The chime will sound and the system will not be able to be set. . When the VDC system is turned off . When the VDC or ABS (including the traction control system) operates . When [...]

SSD0621 Condition C: When the ICC system is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take: If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the IC C system again. If it is not possible to set the system or th[...]

5-50 Starting and driving INFINITI retailer. . Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause fai lure or malfunction. C ONVENTIONAL (fixed speed) CRUISE CONTROL MODE This mode allows driving at a speed between 25 to 90 MPH (40 to 144 km/h) without keeping your foot on the accel- e[...]

SSD0618 Conventional (fixed speed) cruise control mode display and indica- tors The display is located between the speed- ometer and tac hometer. 1. MAIN switch indic ator: Indicates that the MAIN switch is ON. 2. Cruise set switc h indicator: Displays while the vehicle speed is controlled by the conventional (fixed speed) cruise control mode of th[...]

5-52 Starting and driving set your desired cruising speed. Pushing the MAIN switch again will turn the system completely off. When the ignition switch is pushed to the OFF position, the system is also automati- cally turned off. T o use the Intelligent Cruise Control again, quickly push and release the MAIN switch (vehicle-to-vehicle distance contr[...]

2. Push and hold the C OAST/SET switch. Release the switch when the vehicle slows down to the desired speed. 3. Push, then quickly release the COAST/ SET switc h. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). T o resume the preset speed, push and release the ACCELERA TE/RESUME switch. The vehicle will resume the last[...]

5-54 Starting and driving retailer. PREVIEW FUNCTION (for Intelligent Cruise Control system equipped models) The IC C system with the preview function identifies the need to apply emergency braking by sensing the vehicle ahead in the same lane and the distance to the vehicle ahead and relative speed from it, it applies the brak e pre-pressure befor[...]

JVS0124X PRECAUTIONS ON DISTANCE CON- TROL ASSIST SYSTEM The system is intended to assist the driver to keep a following distance from the vehicle ahead traveling in the same lane and direction. If the distance sensor * A detects a slower moving vehicle ahead, the system will reduce the vehicle speed to help assist the driver to maintain a followin[...]

5-56 Starting and driving — When rain, snow or dirt adhere to the system sensor — On steep downhill roads (frequent braking may result in overheating the brakes) — On repeated uphill and downhill roads . Do not use the Distance C ontrol Assist system if you are towing a trailer. The system may not det ect a vehicle ahead. . In some road or tr[...]

In these instances, the Distance Control Assist (DCA) system may not be able to decelerate the vehicle properly. Be sure to chec k and clean the sensor regularly . The DCA system is designed to help assist the driver to maintain a following distance from the vehicle ahead. The system will decelerate as necessary and if the vehicle ahead comes to a [...]

5-58 Starting and driving SSD0252 The detection zone of the sensor is limited. A vehicle ahead must be in the detection zone for the system to operate. A vehicle ahead may move outside of the detection zone due to its position within the same lane of travel. Motorcycles may not be detected in the same lane ahead if they are traveling offset from th[...]

SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the system to work inappropriately. The detection of vehicles may also be affected by vehicle operation ([...]

5-60 Starting and driving The light comes on if there is a malfunction in the DCA system. SSD1183 Operating Distance Control Assist (DCA) system T o turn on the DCA system, push the dynamic driver assistance switch on the steering wheel after starti ng the engine. The Distance Control Assist (DCA) system switch indicator light in the dot matrix liq[...]

SSD0884 SSD0885 Setting DCA system to ON/OFF: 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller. Then push the ENTER * 2 button. 2. Highlight the “ Dynamic Assistance set- tings ” key, and push the ENTER * 2 button. SSD0886 3. To set the DCA system to on or off, highlig[...]

5-62 Starting and driving SSD0771 Under the following conditions, the Dis- tance Control Assist system will not oper- ate and the Distance Control Assist (DCA) system switch indicator light will blink: . When the SNOW mode switc h is ON (T o use the DCA system, turn off the SNOW mode switch, then turn on the dynamic driver assistance switc h.) For [...]

SSD0746 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation WARNING The Distance Control Assist system auto- matically decelerates your vehicle to help assist the driver to maintain a following distance from the vehicle ahead. Manually brake when deceleration is required to maintain a safe distance [...]

5-64 Starting and driving WARNING . When the vehicle ahead detection in- dicator light is not illuminated, system will not control or warn the driver. . Never place your foot under the brake pedal. Y our foot may be caught when the system contr ols the brake. . Depending on the position of the accel- erator pedal, the system may not be able to assi[...]

SSD0284A NOTE: The approach warning chime may sound and the system display may blink when the sensor detects some reflectors * A which are fitte d on vehicles in other lanes or on the side of the road. This may cause the DCA system to operate inappropriately . The sensor may detect these reflectors when the vehicle is driven on winding roads, hilly[...]

5-66 Starting and driving . When driving into a strong light (for example, sunlight) Action to take: When the conditions listed above are no longer present, turn the system off with the dynamic driver assistanc e switch. T urn the DCA system bac k on to use the system. SSD0772 Condition B: When the sensor window is dirty, making it impossible to de[...]

conditions, have the vehicle checked at an INFINITI retailer. Sensor maintenance How to handle the sensor: The sensor for the DCA system is common with Intelligent Cruise Control and is located below the front bumper. T o handle the sensor, see “ Intelligent Cruise Control (ICC) system (FULL SPEED RANGE) ” (P . 5-32). The Forward Collision Warn[...]

5-68 Starting and driving SSD1156 Warning syst ems switc h The FCW system uses the distance sensor * A located below the front bumper to measure the distance to the vehicle ahead. When the system judges that your vehicle is getting close to the vehicle ahead in the travel lane, the vehicle ahead detection indicator light on the instrument panel bli[...]

— When abruptly accelerating or de- celerating. — On a steep downhill slope or on roads with sharp curves. — When there is a highly reflective object near the vehicle ahead (for example, being very close to another vehicle, signboard, etc.) — When you are towing a trailer. . Depending on certain road conditions (curved or beginning of a cur[...]

5-70 Starting and driving SSD1156 Warning syst ems switch FCW system operation The FCW system will function at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on. The FCW system has an automatic setting mode and a manual setting mode to turn the system on. The setting mode can be changed. In the automatic setting mode, the[...]

JVS0124X SSD0749 V ehicle ahead detection indicator light The IBA system uses a distance sensor * A located below the front bumper to measure the distance to the vehicle ahead. When the system judges that your vehicle is getting close to the vehicle ahead in the traveling lane, the vehicle ahead detection indicator light on the instrument panel bli[...]

5-72 Starting and driving road spray . — When visibility is low (such as rain, fog, snow, etc.). — When snow or road spray from traveling vehicles is splashed. — When dense exhaust or other smoke (black smoke) from vehicles reduces the visibility of the sensor. — When excessively heavy baggage is loaded in the rear seat or the luggage room [...]

system may not detect them. In these instances the system may not be able to warn the driver properly . Be sure to chec k and clean the sensor regularly . . Excessive noise will interfere with the warning chime sound, and the chime may not be heard . . Never place your foot under the brake pedal when the IBA system turns on. Y our foot may be caugh[...]

5-74 Starting and driving pushed again, the system will turn on and the IBA OFF indic ator light will turn off . The IBA system will remain in the last ON or OFF state it was left in until it is manually changed by pressing the IBA OFF switch. Illumination of the IBA OFF indicator light without the warning chime sound is an indication that the IBA [...]

namic drag. . Recirculating the cool air in the cabin when the A/C is on reduces cooling load. 4. Drive at economical speeds and dis- tances. . Observing the speed limit and not exceeding 60 MPH (97 km/h) (where legally allowed) can improve fuel efficiency due to reduced aerody- namic drag. . Maintaining a safe following dis- tance behind other veh[...]

5-76 Starting and driving . Keep your engine tuned up. . Follow the recommended scheduled maintenance. . Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. . Keep the wheels in correct alignment. Improper alignment increases tire wear and lowers fuel ec onomy. . Use the recommended viscos[...]

ground and shift the transmission to any drive or r everse position with the engine running. Doing so may result in drive- train damage or unexpected vehicle movement which could result in serious vehicle damage or personal injury. . Do not attempt to tes t an AWD equipped vehicle on a 2-wheel dynamometer (such as the dynamometers used by some stat[...]

5-78 Starting and driving SD1006MA WARNING . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. . Never leave the engine running while the vehicle is unattended. . Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls.[...]

WARNING If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. The power assisted steering uses a hy- draulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, mu[...]

5-80 Starting and driving BRAKING PRECAUTIONS The brake system has two separate hy- draulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Y ou may feel a small click and hear a sound when the brake pedal is fully depressed slowly. This is not a malfunction and indicates that the brake assist mechanism is operatin[...]

erating could cause the wheels to skid and result in an accident. . If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. BRAKE ASSIST When the force applied to the brake pedal exceeds a certain level, the Brake Assist is activated generating greater braking force than a [...]

5-82 Starting and driving SSD0338 . The sensor will not detect: 1) Pedestrians or objects in the road- way 2) Oncoming vehicles in the same lane 3) Motorcycles traveling offset in the travel lane as illustrated WARNING . This system is only an aid to assist braking operation and is not a collision warning or avoidance device. It is the driver ’ s[...]

SSD0471 Warning light and display When the Preview Function is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take: If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine and resume driving. If the indicator stays on, it may indicate that the P[...]

5-84 Starting and driving and Loading Information label ” (P .9- 13) of this manual. — For detailed information, see “ Wheels and tires ” (P .8-32) of this manual. The Anti-lock Braking System (ABS) con- trols the brak es so the wheels do not lock during hard braking or when braking on slippery surfaces. The system detects the rotation spee[...]

The V ehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC system helps to perform the following functions. . Controls brake pressure to reduce tire slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle. . Con[...]

5-86 Starting and driving bars, bushings and wheels are not INFINITI recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly. This could adversely affect vehicle handling performance, and the VDC warning light may illuminate. . If brake related parts such as brake pads, rotors and calipers are not INFINIT[...]

through attentive and careful driving meth- ods can the Rear Active Steer system be fully appreciated and safety assured. FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the Intelligent Key system. ANTIFREEZE I[...]

5-88 Starting and driving SPECIAL WINTER EQUIPMENT It is recommended that the following items be carried in the vehicle during winter: . A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. . A sturdy, flat board to be placed under the jack to give it firm support. . A shovel to dig the vehicle out of snowdri[...]

WARNING . Do not use your engine block heater with an ungrounded electrical system or a 2- pronged adapter. Y ou can be seriously injured by an electrical shock if you use an ungrounded co nnection. . Disconnect and properly store the en- gine block heater cord before starting the engine. Damage to the cord could result in an electrical shock and c[...]

5-90 Starting and driving MEMO[...]

6 In case of emergency Hazard warning flasher switch ............................. 6-2 Roadside assistance program .............................. 6-2 Emergency engine shut off .................................. 6-3 Flat tire................................................................ 6-3 Tire Pressure Monitoring Sys tem (TPMS).......... 6-3 Cha[...]

6-2 In cas e of emer gency SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road. . Do not use the hazard warning flashers while moving on the highway unless unusual circumstances[...]

T o shut off the engine in an emergency situation while driving perform the follow- ing procedure: . Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or . Push and hold the push-button ignition switch for more than 2 seconds. TIRE PRESSURE MONITORING SYS- TEM (TPMS) This vehicle is equipped with the Tire Pr[...]

6-4 In case of emer gency . Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pr essure sensors. CHANGING A FLA T TIRE If you have a flat tire, follow the instruc- tions below. Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard war[...]

SCE0766 Getting the spare tire and tools 1 . Remove the cargo cover (if so equipped). See “ Cargo co ver ” (P .2-57). 2. Raise the luggage room floor cover using the handle * A , then hang it on the edge of the luggage room opening using the hook * B . SCE0767 Remove jacking tools and the spare tire located under the luggage room. T urn the ret[...]

6-6 In case of emer gency Carefully read the caution label attached to the jack body and the following instruc- tions. SCE0771 Jack -up point 1. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. Align the jac k head between the two notches in the front or the rear as sh[...]

SCE0504 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. 3. Carefully raise the vehicle until the tire clears the ground. T o lift the vehicle, securely hold the jack lever and rod with both hands as shown above. Remove the wheel nuts, and[...]

6-8 In case of emer gency 4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle comple- tely. WARNING . Incorrect wheel nuts or improperly tigh- tened wheel nuts can cause the wheel to become loose or come off. This could caus[...]

T o start your engine with a booster battery, the instructions and precautions below must be followed. WARNING . If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injur y or death. It could also damage your vehicle. . Explosive hydrogen gas is always pre- sent in the vicinity of the battery. Keep all sparks and[...]

6-10 In case of emer gency SCE0772 VQ37VHR engine SCE0770 VK50VE engine WARNING Always follow the instructions below. Failure to do so could result in damage to the charg ing system and caus e personal injury. 1. Remove the engine compartment cover, if necessary. See “ Engine compartment chec k locations ” (P .8-7). 2. If the booster battery is[...]

CAUTION . Always connect positive (+) to positive (+) and negative ( − ) to body ground (as illustrated) — not to the battery. . Make sure the jumper cables do not touch moving parts in the engine com- partment and that clamps do not contact any other metal. 6. Start the engine of the booster vehicle * A and let it run for a few minutes. 7. Kee[...]

6-12 In case of emer gency CAUTION . Do not co ntinue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. . T o avoid the danger of being scalded, never remove the radiator cap while the engine is still hot. When the radiator cap is removed, pressurized hot water will spurt out, possibly causing serious injury.[...]

When towing your vehicle, all State (Pro- vincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. T owing instructions are available from an INFINITI retailer. Local service operators are familiar with the applicable laws and procedures for towing. To assure proper towing and to pr[...]

6-14 In case of emer gency SCE0768 Two-wheel drive models TOWING REC OMMENDED BY INFINITI Two-Wheel Drive (2WD) models INFINITI recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION . Never tow automatic transmission mod- els with the rear wheels on the g[...]

SCE0736 All-wheel drive models All-Wheel Drive (AWD) models INFINITI recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow AWD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain. JVE0038X In cas e of eme[...]

6-16 In case of emer gency VEHICLE RECOVERY (freeing a stuck vehicle) WARNING . Stand clear of a stuck vehicle. . Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. Pulling a stuck vehicle If your vehicle is stuck in sand, snow, mud, etc., us[...]

MEMO In cas e of emergency 6-17[...]

6-18 In case of emer gency MEMO[...]

7 Appearanc e and c are Cleaning exterior ................................................. 7-2 Washing .......................................................... 7-2 Waxing ............................................................ 7-2 Removing spots............................................... 7-3 Underbody ...................................[...]

7-2 Appearance and car e In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surface, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain . after driving on co astal roads . when contaminants such as soot, bird droppings, tree sap, metal[...]

. Wax your vehicle only after a thorough washing. Follow the instructions sup- plied with the wax. . Do not use a wax containing any abrasives, cutting compoun ds or clea- ners that may damage the vehicle finish. Machine compound or aggressive polish- ing on a base coat/clear coat paint finish may dull the finish or leave swirl marks. REMOVING SPOT[...]

7-4 Appearance and car e ambient temperature. . Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME P ARTS Clean chrome parts regularly with a non- abrasive chrome polish to maintain the finish. TIRE DRESSING INFINITI does not recommend the use of tire dressings. Tire manufacturers apply a coating[...]

CAUTION . Never use benzine, thinner, or any similar material. . For cleaning, use a soft cloth, dampened with water. Never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a c hemical cleaning agent. They will scratch or cause discoloration to the lens. . Do not spray any liquid such as water on the meter len[...]

7-6 Appearance and car e SAI0039 Floor mat positioning aid This model includes front floor mat brack - ets to act as floor mat positioning aid. NISSAN floor mats have been specially designed for your vehicle model. The front floor mats have grommet holes in them. T o install, simply position the mat by placing the floor mat bracket through the floo[...]

MOST C OMMON FACTORS C ONTRI- BUTING TO VEHICLE C ORROSION . The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. . Damage to paint and other protective coatings caused by gravel and stone chips or minor traffic accidents. ENVIRONMENTAL FACTORS INFLU- ENCE THE RA TE OF CORROSION Moisture Accumula[...]

7-8 Appearance and car e MEMO[...]

8 Maintenanc e and do-it-yourself Maintenance requirement .................................... 8-2 Scheduled maintenanc e .................................. 8-2 General maintenance....................................... 8-2 Where to go for service ................................... 8-2 General maintenance ..........................................[...]

8-2 Maintenanc e and do-it-yourself Some day-to-day and regular maintenance is essential to maintain your vehicle ’ s good mechanic al condition, as well as its emis- sion and engine performance . It is the owner ’ s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed. As the vehicle owner, y[...]

is released. When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also chec k headlight aim. Road wheel nuts ([...]

8-4 Maintenance and do-it-y ourself seat adjusters, seatback recliner, etc. to ensure they operate smoothly and that all latches lock securely in every position. Check that the head restraints move up and down smoothly and that the locks (if so equipped) hold securely in all latched positions. Steering wheel: Check for changes in the steering condi[...]

those used on icy roads or to control dust. It is very important to remove these substances, otherwise rust will form on the floor pan, frame, fuel lines and around the exhaust system. At the end of winter, the underbody should be thoroughly flushed with plain water, being careful to clean those areas where mud and dirt may accumulate. For addition[...]

8-6 Maintenance and do-it-y ourself are under high pressure even when the engine is off. CAUTION . Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. . Avoid direct contact with used engine oil and coolant. Improperly disposed engine oil, coolant, and/or other vehicle fluids can damage the environ[...]

SDI2262 VQ37VHR ENGINE 1. Fuse/fusible link holder 2. Battery 3. Radiator filler cap 4. Engine oil dipstic k 5. Engine oil filler c ap 6. Brake fluid reservoir 7. Window washer fluid reservoir 8. Power steering fluid reservoir 9. Air cleaner 10. Drive belts 11. Coolant reservoir Maintenanc e and do-it-yourself 8-7 ENGINE C OMPARTMENT CHECK LOCA TIO[...]

8-8 Maintenance and do-it-y ourself SDI2263 VK50VE ENGINE T o remove the engine compartment covers, unhook the clips * A located as illustrated. T o remove the engine cover , pull the cover upward first * 1 and then toward the front of the vehicle * 2 .[...]

SDI2264 1. Fuse/fusible link holder 2. Battery 3. Engine oil filler c ap 4. Radiator filler cap 5. Engine oil dipstic k 6. Brake fluid reservoir 7. Window washer fluid reservoir 8. Power steering fluid reservoir 9. Air cleaner 10. Drive belt location 11. Coolant reservoir The engine cooling system is filled at the factory with a pre-diluted mixture[...]

8-10 Maintenance and do-it-y ourself CAUTION . Never use any cooling system additives such as radiator sealer. Additives may clog the cooling system and cause damage to the engine, transmission and/or cooling system. . When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equiva- lent. Genuine N[...]

If the cooling system requires coolant frequently , have it checked by an INFINITI retailer. CHANGING ENGINE COOLANT Major cooling system repairs should be performed by an INFINITI retailer. The service procedures can be found in the appropriate INFINITI Service Manual. Improper servicing can result in reduced heater performance and engine overheat[...]

8-12 Maintenance and do-it-y ourself CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brak e. 2. Run the engine until it reaches operat- ing temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the wa[...]

SDI2335 VQ37VHR engine — 2WD models SDI2047 VQ37VHR engine — AWD models SDI2266 VK50VE engine Engine oil and filter 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Remove the drain plug * 1 with a wrench and completely drain the oil. CAUTION Be careful not to burn yourself, as the engine oil is hot. . Waste oil[...]

8-14 Maintenance and do-it-y ourself 8. Clean and re-install the drain plug with a new washer. Securely tighten the drain plug with a wrench. Drain plug tightening torque: 22 to 29 ft-lb (29 to 39 N·m) Do not use exc essive force. 9. Refill engine with recommended oil and install the oil filler cap securely. CAUTION The dipstick must be inserted i[...]

Contact an INFINITI retailer if replacement is required. CAUTION . Use only Genuine NISSAN Matic S A TF . Do not mix with other fluids. . Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmis- sion, which is not c[...]

8-16 Maintenance and do-it-y ourself For further brake fluid specification infor- mation, see “ Capacities and recommended fuel/lubricants ” (P . 9-2) of this manual. WARNING . Use only new fluid from a sealed container. Old, inferior or contaminated fluid may damage the brake system. The use of improper fluids can damage the brake system and a[...]

Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze. Follow the manufacturer ’ s instructions for the mixture ratio. Refill the reservoir more frequently when driving conditions require an increased amount of window washer fluid. Recommended fluid is Genuine NISSAN Windshield Washer Con[...]

8-18 Maintenance and do-it-y ourself ated by the battery is explosive. Do not allow battery fluid to contact your skin, eyes, f abrics, or painted surfaces. After touching a battery or battery cap, do not touch or rub your eyes. Thoroughly wash your hands. If the acid contacts your eyes, skin or clothing, immediately flush with water for at least 1[...]

JUMP ST ARTING If jump starti ng is necessary, see “ Jump starting ” (P .6-9). If the engine does not start by jump starting, the battery may have to be replaced. Contact an INFINITI retailer. CAUTION . Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery ma[...]

8-20 Maintenanc e and do-it-yourself SDI1411B VK50VE engine 1. Water pump 2. Alternator 3. Crankshaft pulley 4. Power steering fluid pump 5. Air conditioner compresso r WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotat e unexpectedly. 1. Visually inspect each belt for signs of un[...]

SDI2020 REPLACING SP ARK PLUGS If replacement is required, see an INFINITI retailer for servicing. Iridium-tipped spark plugs It is not necessary to replac e the iridium- tipped spark plugs as frequently as the conventional type spark plugs since they will last much longer. Follow the main- tenance schedule in “ INFINITI Service and Maintenance G[...]

8-22 Maintenanc e and do-it-yourself wipe the inside of the air cleaner housing and the cover with a damp cloth. WARNING . Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops flame if the engine backfires. If it isn ’ t there, and the engine backfires, you could[...]

SDI2048 REPLACING Replace the wiper blades if they are worn. 1. Pull the wiper arm. 2. Push the release tab * A , and then move the wiper blade down the wiper arm * 1 while pushing the release tab to remove. 3. Insert the new wiper blade onto the wiper arm until a clic k sounds. 4. Rotate the wiper blade so the dimple is in the groove. CAUTION . Af[...]

8-24 Maintenanc e and do-it-yourself Contact an INFINITI retailer if chec king or replacement is required. If the brakes do not operate properly, have the brakes c hec ked by an INFINITI retailer. SELF-ADJUSTING BRAKES Y our vehicle is equipped with self-adjust- ing brakes. The disc-type brakes self-adjust every time the brake pedal is applied. WAR[...]

SDI1479A ENGINE COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, c heck for an open fuse. 1. Be sure the ignition switch is pushed to the OFF or LOCK position and the headlight s[...]

8-26 Maintenanc e and do-it-yourself SDI2034 P ASSENGER COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, c heck for an open fuse. 1. Be sure the ignition switch is pushed to the [...]

case, remove the extended storage fuse switch and replac e it with a new fuse of the same rating. How to remove the extended storage fuse switch: 1. To remove the extended storage fuse switch, be sure the ignition switch is in the OFF or L OCK position. 2. Be sure the headlight switc h is in the OFF position. 3. Remove the fuse box cover. 4. Pinch [...]

8-28 Maintenanc e and do-it-yourself the upper part from the lower part. 3. Replace the battery with a new one. Recommended battery: CR2032 or equivalent. . Do not touch the internal circuit and electric terminals as it could cause a malfunction. . Hold the battery by the edges. Holding the battery across the con- tact points will seriously deplete[...]

JVM0156X 1. Headlight (high-beam, low-beam) 2. Front turn signal light 3. Map light 4. Front side marker light 5. Rear personal light 6. Fog light 7. Parking light 8. Puddle light 9. Step light 10. High-mounted stop light 11. Cargo light (sidewall) 12. Cargo light (lift gate) 13. License plate light 14. Back -up light 15. Rear combination light (ta[...]

8-30 Maintenanc e and do-it-yourself HEADLIGHTS Replacing Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact an INFINITI retailer. Xeno[...]

Replacement procedures All other lights are either type A, B, C, D, E or F . When replacing a bulb, first remove the lens and/or cover. SDI1679 SDI2030 Map light SDI2031 Rear personal light Maintenanc e and do-it-yourself 8-31[...]

8-32 Maintenanc e and do-it-yourself SDI1500B Cargo light SDI1839 V anity mirror light If you have a flat tire, see “ Flat tire ” (P .6- 3). TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pre[...]

WARNING . Improperly inflated tires can fail suddenly and cause an accident. . The Gross V ehicle Weight rating (GVWR) is located on the F .M. V .S. S./C.M. V .S.S. certification label. The vehicle weight capacity is indicated on the Tire and Loading Information label. Do not load your vehicle beyond this capacity. Overloading your vehicle may re- [...]

8-34 Maintenanc e and do-it-yourself SDI2703 Tire and Loading Information label * 1 Seating capacity: The maximum number of occupants that c an be seated in the vehicle. * 2 V ehicle load limit: See “ V ehicle loading information ” (P . 9-15). * 3 Original size: The size of the tires originally installed on the vehicle at the factory. * 4 Cold [...]

SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or forc e the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, re- position the gauge to eliminate this leakag[...]

8-36 Maintenanc e and do-it-yourself SDI1575 Example TIRE LABELING Federal law requires tire manufac- turers to place standardized informa- tion on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certific ation[...]

SDI1607 Example * 2 TIN (Tire Identification Number) for a new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the “ Depart- ment of T ransportation ” . The sym- bol can be placed above, below or to the left or right of the Tire Identification Number. 2. Two-digit code: Manufacturer ’ s identification mark 3. Two-digit code: Tire [...]

8-38 Maintenanc e and do-it-yourself bears white lettering or bears manu- facturer, brand and/or model name molding that is higher or deeper than the same molding on the other side- wall of the tire, or (2) the outward facing sidewall of an asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle. TYPES O[...]

TIRE CHAINS Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When instal- ling tire chains, make sure they are the proper size for the tires on your vehicle and are installed according to the chain man- ufacturer ’ s suggestions. Use only SAE Class S chains. Class “ S ” chains are[...]

8-40 Maintenance and do-it-y ourself The wheel nuts must be kept tigh- tened to the specification at all times. It is recommended that wheel nuts be tightened to the specifica- tion at each tire rotation interval. WARNING . After rotating the tires, chec k and adjust the tire pressure. . Retighten the wheel nuts when the vehicle has been driven for[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carry- ing capacity as originally equipped. (See “ Specifications ” (P .9-8) for recommended types and sizes of tires and wheels.) WARNING . The use of tires other than those recommended or the mixed use of tires of different brands, constru[...]

8-42 Maintenance and do-it-y ourself placed with tires of the same size, brand, construction and tread pattern. The tire pressure and wheel alignment should also be check ed and corrected as necessary. Contact an INFINITI retailer. Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out o[...]

. Because the TEMPORARY USE ONL Y spare tire is smaller than the original tire, ground clearance is reduced. T o avoid damage to the vehicle, do not drive over obstacles. Also do not drive the vehicle through an automatic car wash since it may get caught. Maintenanc e and do-it-yourself 8-43[...]

8-44 Maintenance and do-it-y ourself MEMO[...]

9 T ec hnical and consumer information Capacities and recommended fuel/lubricants ....... 9-2 Fuel information .............................................. 9-4 Engine oil and oil filter recommendation ......... 9-6 Air conditioning system refrigerant and lubricant recommenda tions ............................. 9-7 Specifications .................[...]

9-2 T echnic al and consumer information The following are approximate capacities. The actual refill capacit ies may be a little different. When refilling, follow the procedur e instructed in the “ 8. Maintenance and do-it-yourself ” section to determine the proper refill capacity. Capacity (Approximate) Recommended specifications US measure Im[...]

*1: For additional information, see “ Engine oil ” (P .8-11) for changing engine oil. *2: INFINITI recommends Genuine NISSAN Ester Engine Oil available at INFINITI retailers. *3: Using automatic transmission fluid other than Genuine NISSAN Matic S ATF will cause deterioration in driveability and automatic transmission durability, and may damage[...]

9-4 T echnical and con sumer information FUEL INFORMA TION Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If premium gasoline is not available, unleaded regular gasoline with an octane rating of 87 AKI number (Research octane number 91) may be temporarily used, but only [...]

15%.) . E-15 fuel contains more than 10% oxygenate. E-15 fuel will adversely affect the emission control devices and syst ems of the vehicle and should not be used. Damage caused by such fuel is not covered by the INFINITI new vehicle limited warranty . . If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood [...]

9-6 T echnical and con sumer information above symptoms are encountered, have your vehicle checked at an INFINITI retailer or other competent service facility. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is no cause for concern, because you get the greatest fuel benefit when t[...]

Oil which may contain foreign matter or has been previously used should not be used. Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important that the engine oil viscosity be selected based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil visc[...]

9-8 T echnical and con sumer information Contact an INFINITI retailer when servicing your air conditioning system. ENGINE Model VK50VE VQ37VHR Type Gasoline, 4-cycle Gasoline, 4-cycle Cylinder arrangement 8-cylinder, V-slanted at 90 8 6-cylinder, V-slanted at 60 8 Bore 6 Stroke in (mm) 3. 760 6 3.453 (95.5 6 87. 7) 3. 760 6 3. 385 (95.5 6 86.0) Dis[...]

STI0397B VK50VE engine STI0425 VQ37VHR engine WHEELS AND TIRES Road wheel Type Size Offset in (mm) Conventional 18 6 8J 1. 97 (50) 20 6 8J 21 6 9-1/2J Spare 18 6 4-1/2T 1.18 (30)/0.98 (25)* *: Aluminum Tire Type Size Pressure PSI (kPa) [Cold] Conventional P265/60R18 33 (230) P265/50R20 P265/45R21 Spare (T-type) T175/90D18 60 (420) T echnical and co[...]

9-10 T echnical and cons umer information DIMENSIONS Overall length (With front license plate) in (mm) 191. 3 (4,860) Overall width in (mm) 75. 9 (1, 925) Overall height in (mm) 65.0 (1,650)*1 66.1 (1,680)*2 Front tread in (mm) 64.4 (1,635) Rear tread in (mm) 64.6 (1,640) Wheelbase in (mm) 113.6 (2,885) *1: Model without roof rack *2: Model with ro[...]

If you plan to travel in another country, you should first find out if the fuel available is suitable for your vehicle ’ s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. Therefore, avoid taking your vehicle to areas where appropriate fuel is not available. W[...]

9-12 T echnical and cons umer information STI0584 VK50VE engine STI0509 VQ37VHR engine ENGINE SERIAL NUMBER The number is stamped on the engine as shown. STI0448 F .M. V .S.S./C.M. V .S.S. CERTIFICA- TION LABEL The Federal/Canadian Motor V ehicle Safety Standards (F .M. V .S.S./C.M. V .S.S.) certifica- tion label is affixed as shown. This label con[...]

STI0422 EMISSION CONTROL INFORMA TION LABEL The emission control information label is attached as shown. STI0373 TIRE AND LOADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. STI0495 AIR C ONDITIONER SPECIFICA TION LABEL The air conditioner specification label is [...]

9-14 T echnical and cons umer information JVT0147X Use the following steps to mount the license plate. Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. Only use the recommended mounting position, otherwise Intelligent Cruise C on- trol (IC C) sensor obstruction (if so equipped) may result. . Licen[...]

5. Insert grommets into the hole on the fascia. 6. Insert a flat-blade screwdriver into the grommet hole to add 90 8 turn onto the part * E . 7. Insert a J-nut into the license plate bracket before placing the license plate bracket on the fascia. 8. Install the license plate bracket with screws. 9. Install the license plate with bolts that are no l[...]

9-16 T ec hnical and cons umer information of the load (passengers and car- go) for the vehicle. This is the maximum com bined weight of occupants and c argo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be included as part of the cargo load. This information is located on the Tire and [...]

VEHICLE L OAD CAPACITY Do not exc eed the load limit of your vehicle shown as “ The combined weight of occupants and cargo ” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “ Seating Capa- city ” on the Tire and Loading In- formation label. T o get “ the combined weight of occupants and cargo ” [...]

9-18 T echnical and cons umer information SIC3849 SECURING THE L OAD There are tie down hooks located in the cargo area as shown. The tie down hooks can be used to secure cargo with ropes or other types of straps. Do not apply a total load of more than 22 lb. (98 N) to a single hook when securing cargo. WARNING . Properly secure all cargo with rope[...]

serious accident and personal in- jury. Failures caused by overload- ing are not covered by the vehicle ’ s warranty. MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels sepa- rately to determine axle [...]

9-20 T echnic al and consumer information STI0541 The GCWR equals the combined weight of the towing vehicle (including passengers and cargo) plus the total trailer load. T owing loads greater than these or using improper towing equipment could ad- versely affect vehicle handling, braking and performance. The ability of your vehicle to tow a trailer[...]

STI0542 T ongue load When using a weight carrying or a weight distributing hitch, keep the tongue load between 10 to 15% of the total trailer load within the maximum tongue load limits shown in the following “ Towing Load/ Specification ” chart. If the tongue load becomes excessive, rearrange cargo to allow for proper tongue load. TI1012M MAXIM[...]

9-22 T echnic al and consumer information available maximum tongue load. T o determine the available towing capacity, use the following proc edure. 1. Find the GCWR for your vehicle on the “ T owing Load/Specification ” chart found later in this section. 2. Subtract the actual vehicle weight from the GCWR. The remaining amount is the available [...]

TOWING L OAD/SPECIFICA TION TOWING LOAD/SPECIFICA TION CHART Unit: lb (kg) VQ37VHR VK50VE Two-Wheel Drive (2WD) model All-Wheel Drive (AWD) model All-Wheel Drive (AWD) model MAXIMUM TRAILER WEIGHT*1 — 2,000 (907)*3 3,500 (1,588)*4 3,500 (1,588) MAXIMUM TONGUE LOAD — 200 (91)*3 350 (159)*4 350 (159) GROSS COMBINED WEIGHT RA TING — 7,355 (3,336[...]

9-24 T echnic al and consumer information of the ball. . Choose the proper class hitch ball based on the trailer weight. . The diameter of the threaded shank of the hitch ball must be matc hed to the ball mount hole diameter. The hitch ball shank should be no more than 1/16 smaller than the hole in the ball mount. . The threaded shank of the hitch [...]

to the hitch, not to the vehicle bumper or axle. The safety chains can be attached to the bumper if the hitc h ball is mounted to the bumper. Be sure to leave enough slack in the c hains to permit turning co rners. T railer lights CAUTION When splicing into the vehicle electrical system, a commercially available power- type module/converter must be[...]

9-26 T echnic al and consumer information inadvertently becoming unlatc hed. . Avoid abrupt starts, acceleration or stops. . Avoid sharp turns or lane changes. . Always drive your vehicle at a moderate speed. Some states or provinces have specific speed limits for vehicles that are towing trailers. Obey the local speed limits. . When backing up, ho[...]

ling. If swaying does occur, firmly grip the steering wheel, steer straight ahead, and immediately (but gradually) reduce vehicle speed. This combination will help stabilize the vehicle. Never increase speed. Do the following if the trailer begins to sway: 1. Tak e your foot off the acc elerator pedal to allow the vehicle to coast and steer as stra[...]

9-28 T echnical and consumer information . DO NOT tow an All-Wheel Drive (AWD) vehicle with any of the wheels on the ground. Doing so may ca use serious and expensive damage to the powertrain. . For emergency towing proc edures refer to “ T owing recommended by INFINITI ” (P .6-14) of this manual. Automatic transmission All-Wheel Drive (AWD) mo[...]

tire failure. The grade C cor responds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. WARNING The temperature grade for this tire is established for a tire t[...]

9-30 T echnic al and consumer information For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the Na- tional Highway T raffic Safety Admin- istration (NHTSA) in addition to notifying INFINITI. If NHTSA receives similar complaints, it may open an investigation,[...]

WARNING A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynam- ometers used by some states for emissions testing), or similar equipment. Make sure you inform test facility personnel that your vehicle is equipped with AWD before it is placed on a dynamometer . Using the wrong test equip[...]

9-32 T echnic al and consumer information crash location) are recorded. However, other parti es, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation. T o read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR is nee[...]

10 Index A ABS (Anti-lock Braking System) ......................... 5-83 Adaptive front lighting system (AFS) .................. 2-42 Adaptive shift control (ASC) .............................. 5-19 Advanced air bag system .................................. 1-42 Aiming control, Adaptive front lighting system (AFS) ..................................[...]

10-2 Cargo light ........................................................ 2-66 Cargo net .......................................................... 2-56 Catalytic converter, Three way catalyst ................ 5-3 CD/CF/USB memory care and cleaning ............. 4-89 Center multi-function control panel ..................... 4-3 Child restraints ...[...]

If your vehicle overheats .............................. 6-12 Starting the engine ...................................... 5-14 Entry/exit function, Automatic drive positioner ... 3-32 Event Data Recorders (EDR) ............................... 9-31 Exhaust gas (carbon monoxide) .......................... 5-3 F F .M. V .S.S./C.M. V .S.S. certification[...]

10-4 Lights .......................................................... 2-19 INFINITI Vehicle Immobilizer System .................. 2-33 INFINITI voice recognition system .................... 4-118 INFO button ........................................... ............. 4-9 Inside mirror ..................................................... 3-29 Inspec[...]

Low washer fluid warning ................................. 2-26 Luggage hooks ................................................. 2-55 M Maintenance Battery .......................................... ............... 8-17 General maintenance ..................................... 8-2 Indicators for maintenance ........................... 2-27 Inside th[...]

10-6 Preview Function warning light .......................... 2-18 Push starting .................................................... 6-11 “ PUSH ” warning ............................................... 2-25 Push-button ignition switc h ..................... 5-11, 5-12 R Radio ............................................ .................... [...]

Rear Active Steer system ............................. 5-86 Steering-wheel-mounted controls for audio ............................. ......................... 4-90 Tilt/telescopic steering ................................. 3-27 Storage ............................................................. 2-51 Sun visors .....................................[...]

10-8 V ehicle Dimensions .................................................. 9-10 Identification number (VIN) .......................... 9-11 Loading information ..................................... 9-15 Recovery (freeing a stuck vehicle) ................ 6-16 Security system ........................................... 2-31 V ehicle dynamic control[...]

MEMO 10-9[...]

FUEL INFORMA TION: Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knoc k Index) number (Research octane number 96). If premium gasoline is not available, unleaded regular gasoline with an octane rating of 87 AKI number (Research octane number 91) may be temporarily used, but only under the following prec autions: . Hav[...]

2014 Infiniti QX70 Owner’s M anual Printing: June 2013 (12) / OM14E 0S51U0 / Printed in U.S.A. For y our safety , read c arefully and keep in this vehicle. 2014 Infiniti QX70[...]