JVC HD-61FH96 manual

Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user ’s guide in a convenient place for future reference. Keep the carton and original packaging for future use. LCT1936-001A-[...]

2 Important Safety Precautions W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit. 2. A void damaging the AC plug and power cord. 3. Avoid Improper inst[...]

3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat[...]

4 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has[...]

5 W arnings Caring for the Cabinet Caring for the Screen Normally , light dusting with a soft, non-scratching duster will keep your TV clean. If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water . Y ou can add a few drops of mild liquid detergent to the water to help remove spot[...]

6 Thank you for purchasing JVC’s model HD-56FH96, HD-61FH96 or HD-70FH96 HDTV -ready projection television which uses the high-quality HD-ILA projection system. This is one of the highest quality and most technologically advanced televisions available today . It is recommended that you read this instruction manual before using your television in [...]

7 4. The television requires a lot of electrical power It is recommended that the television is connected directly to the wall socket, and not to another device. When connecting the television to a wall socket that is being used by another device, or when using an extension cord, be careful not to exceed the electrical capacity of the socket. Do no[...]

8 T able of Contents Unpacking your TV . . . . . . . . . . . . 10 TV Models . . . . . . . . . . . . . . . . 12 TV Remote Control . . . . . . . . . . . 14 Getting Started . . . . . . . . . . . . . 15 The Remote Control . . . . . . . . . . 15 Connecting Y our Devices . . . . . . . 16 Interactive Plug In Menu . . . . . . . . 30 Setting CA TV , VCR and[...]

9 T able of Contents Digital Setup . . . . . . . . . . . . . 78 Antenna Level . . . . . . . . . . . . . 78 Digital Sound . . . . . . . . . . . . . 79 Aspect Ratio . . . . . . . . . . . . . 79 Cable Card Application . . . . . . . . . 80 i.LINK Auto Play . . . . . . . . . . . 80 Software Update . . . . . . . . . . . 80 Digital CH D/A (Digital/Analog)[...]

10 AA Batteries x 2 T elevision x 1 Remote Control x 1 Note: Y our television and/or remote control may differ from the examples illustrated here. Quick Setup Unpacking your TV Thank you for your purchase of a JVC Color T elevision. Before you begin setting up your new television, please check to make sure you have all of the following items. In ad[...]

11 Quick Setup Unpacking your TV Used to connect an external antenna or cable TV system to your TV . Used to make video connections with S-Video VCRs, Camcorders and DVD players. We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many great features. If yo[...]

12 AV COMPULINK III 75Ω (VHF/UHF) OVER CENTER CHANNEL INPUT LICENSED UNDER THE FOLLOWING U.S. PA TENTS 6,183,091 6,419,362 i.LINK IN/OUT S400(TS) ATSC /DIGITAL CABLE IN CABLE CARD OPTICAL OUT Digital Audio SERVICE ONL Y PC IN (D-SUB) INPUT-1 INPUT-2 INPUT-3 INPUT-1 INPUT-2 VIDEO VIDEO VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L Y[...]

13 MODELS: HD-56FH96, HD-61FH96, HD-70FH96 Quick Setup TV Models Side Panel Diagram VOLUME INPUT 4 CHANNEL OPERATE + – + – MENU OVER S-VIDEO VIDEO L/MONO R AUDIO INPUT Front Panel Diagram LAMP/PROGRAM LED POWER BUTTON POWER LED MEDIA CARD SLOT POWER LAMP/PROGRAM POWER LAMP/PROGRAM Close door when using media cards COMPACT FLASH SD/ MMC xD-Pictu[...]

14 MODELS: HD-56FH96 HD-61FH96 HD-70FH96 Quick Setup TV Remote Control RM-C14G • For information on remote control buttons, see pages 67 - 77 and 81 - 86. • i.LINK MENU, TIMER, SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an A TSC antenna or Digital Cable, you can use these buttons. INPUT INDEX ASPECT FREEZ[...]

15 These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Before you can operate your remote control, you first need to install the b[...]

16 Quick Setup Connections Step 2 – Connecting Y our Devices Used to make video connections with S-Video VCRs, Camcorders and DVD players. S-Video Cable Used to connect audio/video devices like VCRs, DVD players, stereo amplifiers, game consoles, etc. Component Cables Composite Cables Audio Cables T o make these connections, you will use plugs li[...]

17 Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user ’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) [...]

18 Quick Setup Connections Diagram #2 OVER CENTER CHANNEL INPUT INPUT-1 INPUT-2 INPUT-3 INPUT-1 INPUT-2 VIDEO VIDEO VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L Y Pb Pr Y Pb Pr S-VIDEO S-VIDEO OVER IN OUT V R L IN OUT Cable or Antenna Output IN OUT OUT T wo-W ay Splitter T wo-W ay Splitter (Attachment) Coaxial Cable (Attachment) Gr[...]

19 Quick Setup Connections Connecting to Monitor/Recording Output T erminal Notes: • When you make this connection, set the Video-1 Monitor Out menu to ON. See page 57. • If you are receiving A TSC/Digital Cable signal, it can be outputted to the S-Video output terminal or Video (composite video) terminal. • If you are receiving Analog TV sig[...]

20 JVC’s A V CompuLink feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the A V CompuLink, the VCR or DVD player sends a signal to the television telling it to [...]

21 Quick Setup Connections 1) Connect a yellow composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the side of the TV , OR connect an S-Video cable from the side of the TV to the camcorder . 2) Connect a white cable from the camcorder LEFT AUDIO OUT , into the LEFT AUDIO IN on the side of the TV . 3) Connect a red cable from the cam[...]

22 Quick Setup Connections Connecting to the Surround Amplifier Front CENTER CHANNEL OUTPUT (V ARIABLE OUTPUT) TV Rear Panel Front Surround CENTER CHANNEL INPUT 1) Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround amplifier's CENTER CHANNEL OUTPUT terminal. Note: • Please read the benefit of this feature [...]

23 Quick Setup Connections Connecting to an amplifier using your optical output Y ou can connect an amplifier that has an optical digital input terminal by using an optical digital cable from the optical output. The signal that is output can be PCM or Dolby Digital. TV Rear Panel OPTICAL OUT Digital Audio Amplifier 1) Connect the optical cable from[...]

24 Quick Setup Connections By connecting a Digital TV Receiver , high definition pictures can be displayed on your TV in their digital form. TV Rear Panel DTV Decoder HDMI to DVI Cable After the connections have been made, tighten the screw to secure the cables. R - AUDIO - L DIGITAL-IN 1 2 LR AUDIO OUT DIGIT AL OUT Connecting to a Digital TV Recei[...]

25 By connecting an HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible devices. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and inter[...]

26 Quick Setup Connections By connecting your A V Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV . This allows you to free up the other input connections so you can connect more devices to your television. Connecting[...]

27 Quick Setup Connections Connecting an i.LINK compatible device to the back of your television i.LINK is a digital serial interface that allows devices equipped with an i.LINK connector to exchange digital video signals, digital audio signals and device control signals bi-directionally over a single cable. (For example, a JVC D-VHS VCR). i.LINK r[...]

28 Quick Setup Connections This TV can be used as a computer screen. Use a commercially available D-SUB cable to connect the TV's PC INPUT terminal to the computer's analog RGB output terminal. If you want to listen to the sound from the computer , use a commercially available RCA cable to connect the INPUT -3 audio input terminal to the [...]

29 Quick Setup Connections T able of signals for each type of computer Resolution 640 x 480 (VGA) 1024 x 768 (XGA) V ertical Frequency (Hz) 60.0 60.0 Horizontal Frequency (kHz) 31.5 48.4 When a picture is not displayed With some computers, some problems can be solved by changing the settings. Check the computer's refresh rate and set it to 60H[...]

30 When you turn your television on for the first time the interactive plug-in menu will appear . The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear . • Setting the TV’s clock to the correct time so your timer functions will work properl[...]

31 T o set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. √ ® T o choose MANUAL † T o TIME √ ® T o set the hour † T o minute √ ® T o set the minute † T o TIME ZONE √ ® T o select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) † T[...]

32 Quick Setup Plug-In Menu The Quick Setup is complete ST OP In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receive only clear , active channels. There are two [...]

33 Y ou can program your remote to operate your cable box, satellite receiver , VCR or DVD player by using the instructions and codes listed below . If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer . The remote control is programmed with cable box [...]

34 The remote control is programmed with VCR codes for power on/off, play , stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the D ISPLA Y butto[...]

35 The remote control is programmed with DVD codes for power on/off, play , stop, fast-forward, rewind, previous/next chapter , tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press [...]

36 Remote Programming Cable/Satellite Search Codes Function 1) Slide the first 2-W ay Mode Selector switch to CA TV . 2) Press the P OWER and R ETURN +/TV buttons. Hold for at least three seconds and release. 3) Press the P OWER button on the remote, and see if the cable or satellite box responds. 4) If there was a response, press R ETURN +/TV . Th[...]

37 T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV’ s side panel instead of the remote, an additional menu screen showing VIDEO ST A TUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST . The “interact[...]

38 Y our television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly . Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 3[...]

39 Press the M ENU button Onscreen Menus TINT COLOR PICTURE BRIGHT DETAIL PICTURE ADJUST SELECT OPERATE EXIT MENU NEXT PAGE PREVIOUS 00 00 00 00 00 STANDARD (1/3) PICTURE ADJUST 01 SELECT OPERA TE EXIT MENU NEXT P AGE PREVIOUS ST ANDARD PICTURE ADJUST (2/3) HIGH OFF OFF ON COLOR TEMPERA TURE COLOR MANAGEMENT DYNAMIC GAMMA SMART PICTURE PICTURE ADJU[...]

40 Initial Setup Auto T uner Setup The auto tuner setup function is described on page 32 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below . Press the M ENU button π † T o AUTO TUNER SETUP √ ® T o operate π † T o TUNER MODE (IN ANALOG) √ ® T o choose CABLE, AIR or SKIP π † T o TUNE[...]

41 Initial Setup Channel Summary Channel summary allows you to customize the line-up of channels received by your TV . Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the only channels that will appear are the ones that [...]

42 Initial Setup How to set the channel label. (This is only for analog broadcasting.) Press the M ENU button π † T o CHANNEL SUMMAR Y √ ® T o operate π † T o the ID column Press the O K button to enter √ ® T o select the character you want π † T o move to the next space ...continue to follow these directions for all four spaces Pres[...]

43 When a viewer attempts to watch a guarded channel, the following message appears: T o watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INV ALID LOCK CODE!” will flash on the screen. The channel cannot be accessed until the correct code is entered. Notes: • Once a cha[...]

44 Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o UNRA TED √ ® T o VIEW or BLOCK Press M ENU when done Directions to Block Unrated Programs Initial Setup Unrated Programs Unrated programming refers to any progr[...]

45 U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children. ❒ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. ❒ TV Y7 is for Older Children Most parents would find such programs suitable for children 7 an[...]

46 Initial Setup Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π † or √ ® to move the cursor to the correct location. Press O K to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”. For example. T o block viewing of all TV 14 shows, move [...]

47 Initial Setup ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released. NR (Not Rated) Programming may contain all types of programming including chi[...]

48 Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (for English) √ ® T o enter ratings menu For example: T o block viewing of programming rated 14+ and 18+: √ ® T o the 18+ Column Press the O K button to lock √ ® T o the 14+ Co[...]

49 Channel guard and V -Chip settings are protected by a four-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish. T o change the lock code, follow the steps below . Press the M ENU button π † T o SET LOCK CODE √ ® T o operate (lock icon appears) Press Z ERO to acce[...]

50 Initial Setup The language function is described on page 30 as the interactive plug-in menu. If you need to choose the language again, follow the steps below . Press the Menu button π † T o LANGUAGE √ ® T o choose a language: ENG. (English), FRAN. (French) or ESP . (Spanish) Press the M ENU button when finished Language INITIAL SETUP SELEC[...]

51 Initial Setup Digital Auto Setting Press the M ENU button π † T o CLOSED CAPTION √ ® T o enter π † T o T ype √ ® T o select Auto, Advanced or Basic Auto: Shows closed caption a priority for digital channels over analog channels. It is set automatically . Advanced: Shows only the digital closed caption. Basic: Shows only the analog cl[...]

52 • Closed caption subtitles are usually found on closed caption channel CC1. Some programs may include additional text information which is usually found on text channel T1. The other channels are available for future use. • Closed captioning may not work correctly if the signal being received is weak or if you are playing a video tape. • M[...]

53 Initial Setup This function automatically shuts off your TV when there is no signal from the channel the TV is on. Press the M ENU button π † T o AUT O SHUT OFF √ ® T o turn ON or OFF Press the M ENU button when finished • If the channel that you have on does not receive a signal for more than one minute, the blinking text “NOT RECEIVI[...]

54 Initial Setup This allows you to lock the keys on the side of the TV , so that a child may not accidentally change your viewing preferences. Press the M ENU button π † T o FRONT P ANEL LOCK √ ® T o turn ON or OFF Press the M ENU button when finished Front Panel Lock Y ou can turn off this feature in the following ways: • Unplug the power[...]

55 Initial Setup This function is used to label video input connections for the onscreen displays. Press the M ENU button π † T o VIDEO INPUT LABEL √ ® T o enter π † T o select the desired video input √ ® T o select the desired preset input label (see chart below) Press the OK button to save Press the M ENU button when finished INITIAL [...]

56 Initial Setup Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema or full. Press the M ENU button π † T o POSITION ADJUSTMENT √ ® T o enter π † √ ® T o adjust the position Press the M ENU button to finish Notes: • T o reset the adjustment to the ce[...]

57 Initial Setup If your TV is connected to a stereo system, you can turn of f the TV speakers and listen to the audio through your stereo. Press the M ENU button π † T o TV SPEAKER √ ® T o turn the TV’s speakers ON or OFF Press the MENU button when finished Notes: • Before you turn the TV speaker setting from OFF to ON, make sure that th[...]

58 This feature is used if you have a DTV or HDMI compatible component connected to your TV . Press the M ENU button π † T o DIGIT AL-IN AUDIO √ ® T o select ANALOG, DIGIT AL or AUTO Press the Menu button when fi nished Notes: • If your DTV or HDMI component is capable of digital audio and video, choose DIGIT AL. If your DTV or HDMI compon[...]

59 When you are using a surround system, you can substitute the speaker of this television for the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the speaker as the center speaker of your surround system. The volume dif fers when the TV is being utilized as the Center Channel Input versus when it is not. Press the M [...]

60 Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT or DET AIL √ ® T o enter √ ® T o adjust the setting π † T o move to the next setting Press the M ENU button when finished These settings allow you to change and adjust the way the picture appears on your television. TINT T int allows you to adjust the levels of red and gree[...]

61 Picture Adjust Color Management This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. Press the M ENU button π † T o COLOR MANAGEMENT √ ® T o enter π † T o select the mode “ON" or "OFF" Press the M ENU button when finished COLOR MANAGEMENT ON OFF Dynamic Gamma JVC&[...]

62 This function blocks noise removal and mosquito NR simultaneously . Press the M ENU button π † T o MPEG NR √ ® T o enter π † T o select ON or OFF . Press the M ENU button when finished This function can be selected to change the effect of Digital NR. Press the M ENU button π † T o DIGIT AL VNR √ ® T o enter π † T o select the e[...]

63 These settings allow you to change and adjust the sound on your television. BASS – Y ou can increase or decrease the level of low-frequency sound in the TV’ s audio with the bass adjustment. TREBLE – Use treble to adjust the level of high-frequency sound in your TV’ s audio. BALANCE – Adjust the level of sound between the TV’ s left [...]

64 Clock/T imers Set Clock The set clock function is described on page 31 as the interactive plug-in menu. Y ou can choose to set the clock automatically or manually . If you need to set the clock again, follow the steps below . Press the M ENU button π † T o SET CLOCK √ ® T o enter When you set the clock automatically , choose AUT O by press[...]

65 The on/off timer lets you program your television to turn itself on or of f. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home. Press the M ENU button π † T o ON/OFF TIMER √ ® T o enter (begins with ON TIME) √ ® T o set the hour (AM/PM) you want the TV to turn on † T [...]

66 The lamp replacement message will appear when you need to change the lamp. After you replace the lamp, you need to reset the timer which is built into your television. Press the M ENU button π † T o LAMP TIMER RESET √ ® T o Enter The following message will appear . Press the OK button while the above message appears on the television scree[...]

67 Button Functions Y our television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels). Multi Screen Function Note: After you press any multiscreen buttons, if you press the menu button, only the picture adjust screen will appear . T win Activate the split-screen option by pressing T WIN on the remote control. The channel (or input[...]

68 Button Functions This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. Notes: • Only RF input signal will be displayed. • Y ou can watch the channel added in channel summary . See page 41. Index 1 5 9 2 6 10 3 7 11 4 8 12 Y ou can exchange the channel (or input) displayed in the split scree[...]

69 Button Functions T urns the TV on or off. Press the P OWER button Note: • After turning the power on, you can not turn the power off for about one minute. Power Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 12: 0 (Zero) 1 (One) 2 (T wo) Number Buttons - 10Key Pad T une Sele[...]

70 Button Functions The R ETURN +/TV button has three functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons. TV - Returns to the TV mode. Press the R ETURN +/TV and hold for three sec[...]

71 Button Functions The M UTING button instantly turns the volume down completely when you press it. Press M UTING and the volume level will instantly go to zero. T o restore the volume to its previous level, press M UTING again. Muting The V IDEO S T A TUS button gives you a choice of four TV picture display settings, including a display of your o[...]

72 Button Functions The Sleep T imer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes. Press the S LEEP button Sleep Timer Message 60 seconds before the automatic shutoff, this message will appear: Y ou then have 60 seconds to press the S LEEP button to delay the[...]

73 Button Functions The display screen shows the current status of timers, inputs and XDS ID. Press the D ISPLA Y button The screen to the right shows the following information: • The current channel or A V input (Channel 05) • The current time (12:20 pm) • Sleep timer status/minutes remaining (The Sleep T imer is off) • On/off timer status[...]

74 Button Functions The Favorite button allows you to select your favorite channels easily . First, you must register the channels that you like. See how to register below . Press the F A VORITE button The favorite channel list will appear . π † T o select the channel you want to watch Press the O K button It will change to the channel you have [...]

75 Button Functions This feature will help you adjust the picture you are watching to give you the best possible picture quality . REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen. The 4:3 picture will fill the screen from [...]

76 Button Functions When you change the aspect ratios, it is different from their broadcast or recorded program. Aspect Ratios (Continued) Press the A SPECT button • By pressing the A SPECT button, you can change the size. ASPECT P ANORAMA CINEMA FULL REGULAR ASPECT P ANORAMA ZOOM CINEMA ZOOM FULL Notes: • Y ou can also choose the size by press[...]

77 Button Functions Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner . Move the switch to CA TV to operate a cable box. Note: • See page 33 for information on programming your remote for cable box operation. Y ou can control a VCR or DVD player with the b[...]

78 Use this function when you are receiving a digital broadcast. Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter The onscreen will appear Notes: • Software Update will only appear when the SD Card is inserted. • If you are watching an analog channel, you can still access the digital setup menu at anytime, while you are doing t[...]

79 Aspect Ratio Y ou can select the aspect mode for A TSC from 4:3 or 16:9. Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter π † T o Aspect Ratio √ ® T o select 4:3 or 16:9 Press the M ENU button when finished Notes: • Set the mode to 4:3 or 16:9 before you record a program using the A TSC MONITOR OUT . • Make sure the mo[...]

80 At first, insert the SD(Multi-media) card into the memory card slot. This function will appear only when you insert an SD Card. Press the M ENU button π † T o DIGIT AL SETUP √ ® T o enter π † T o Software Update √ ® T o enter π † Checks the card if it needs an update or not Press the M ENU button when finished Software Update When[...]

81 Digital Button Functions Sub Channel Digital CH D/A (Digital/Analog) The D/A button changes the analog and digital channel. Each time you press the D/A button, you can switch back and forth the analog and digital channels. Digital channels have a "D" in front of the channel number . Note: • If the cable card is inserted into the TV ,[...]

82 Digital Button Functions i.LINK Menu i.LINK has two menus - Controller and Device. By connecting a D-VHS VCR with an i.LINK cable, you can set the timer easily . Notes: • The i.LINK/T imer function will only work when you are receiving digital programming only . • As for the connection of a D-VHS VCR with the i.LINK cable, see page 27. • W[...]

83 Device T o operate, select a device. π † T o select your device connecting with i.LINK Press the OK button Notes: • If you do not select the device, you cannot use the i.LINK timer functions. • When one device is selected and you select controller , you will move to the Controller onscreen. • The devices listed on the device onscreen ar[...]

84 Y ou can set the two timers: Record and view . The timer starts the recording or turns to the channel you set for it automatically . Press the T IMER button π † T o New Reservation Press the O K button † T o Timer Mode √ ® T o select Rec or View † T o Channel √ ® T o select the channel you want to set the timer for † T o Date √ [...]

85 Timer Edit When you want to confirm the timer you set or edited, or delete the timer setting, use this function. Timer Edition Press the T IMER button π † T o select the timer list you want to edit Press the O K button √ ® π † T o change the setting you want to edit † T o Set T imer Press the O K button Timer Deletion Press the T IMER[...]

86 Y ou can view the program from the GUIDE. Notes: • The GUIDE function will only work when you are receiving digital programming only . • The GUIDE will not show the correct time and date if you have not performed the set clock function on your television. See page 64. Guide Digital Button Functions Cancel the timer recording When you record [...]

87 Media Card V iewer This TV can read the following media cards: SD Card, MMC (Multi Media Card), Memory Stick, xD-Picture Card, CF Card (CompactFlash Card), Removable microdrive Hard Disk for JVC digital media camera "Everio" (a type of CF Card) • Read the cautions on the different types of media cards • Do not remove a media card i[...]

88 Media Card V iewer How to insert Media Card Before you insert a media card into the card slot, open the door on the front panel and make sure of the slot type and the direction to insert the card as illustrated. T o access, gently pull the tab on the door to open it. Once you have inserted the media card, the message "PLEASE CLOSE THE DOOR [...]

89 Media Card V iewer SELECT ONE, AND PRESS OK PHOTO VIDEO FILE Notes: • The above screen will change depending on the type of card you insert. • The sound from the media card can not be changed. • Onscreen language is linked to LANGUAGE in the Initial Setup Menu. • When the media card viewer function is used, the menu is not used. • The [...]

90 Media Card V iewer PHOTO √ ® Select PHOT O Press the O K button The right nine images appear. π † √ ® T o select an image that you like Press the O K button The slide show starts. Notes: • T o stop the slide show , press the B ACK button. • T o pause the slide show , press the O K button. T o play again, press the O K button. • In[...]

91 Media Card V iewer File playback note for PHOTO and VIDEO • Some recorded fi les can result in errors or may not be played back correctly . Sometimes, JPEG, MPEG2, and MPEG4 fi les downloaded from the Internet or other sources cannot be played back correctly . Images also may not be played back correctly depending on the camera that was used[...]

92 Media Card V iewer Operation of the CH+ and CH- keys is different for slideshows started from the PHOT O/VIDEO icon and for slideshows started from the FILE icon. 1) When you select VIDEO icon and play the video, press the following buttons: CH+ : Fast-Forward CH- : Rewinding VOL+ : Up volume VOL- : Down volume OK : Pause or Play (Each pressing [...]

93 Media Card V iewer Specifications 1) Supported card media 2) Supported fi le systems (1) F A T16 (2) F A T32 (3) VF A T 3) Supported data management standards (1) DCF 2.0 (still image) (2) SD-Picture (still image) (3) SD-Video Entertainment V ideo Pro fi le (video) compliant (Video: MPEG2-PS MP@ML, Audio: AC-3 / 48 kHz sampling) (4) SD-Video M[...]

94 OSD Information This OSD warning appears when the digital channel that you have selected is too weak to receive or no signal is being detected for that channel. Weak Signal Weak Signal 15 Invalid Signal If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears [...]

95 Cable Card Information Cable card offers information when a cable card is inserted into the CABLE CARD slot on the back of the TV . Notes: • Please contact your local cable company regarding detailed information. Cable Card Connection ATSC /DIGITAL CABLE IN I CABLE CARD TV Rear Panel CABLE CARD Note for inserting Cable Card: • When you are w[...]

96 T roubleshooting There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor There are lines across the picture The picture is spotted There are double pictures (ghosts) Picture is snowy (image noise) Screen is 80% black Stereo or bilingual program[...]

97 T roubleshooting The following are not malfunctions. • The television may make a creaking sound if the temperature of the room or the temperature inside the television changes. If there is no problem with the screen or sound, then there is no need to worry . • The lamp may make a noise when it blows, but this is not dangerous. • The lamp m[...]

98 Appendix Changing the Lamp W ARNING! It is very important that you NEVER TOUCH THE GLASS SURF ACE OF THE NEW LAMP . T ouching the glass surface will deposit oils from your hand onto the lamp surface. When the lamp heats up to its operating temperature, the oil will cause a difference in temperature on the lamp surface that will likely cause the [...]

99 Appendix Lamp Message If this message appears when you turn the TV on, you need to replace the lamp. See page 100 on how to replace the lamp. Note: • This message will appear every time you turn on the TV when the lamp needs to be replaced. Press the OK button to make the message disappear , or replace the lamp. LAMP NEEDS T O BE REPLACED. REF[...]

100 Appendix How to Replace the Lamp Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician. Please observe all safety warnings. 1) T urn off the television. Press the POWER button on the remote control or TV front panel. W ait until the picture has[...]

101 Appendix W ARNING! Remember it is very important that YOU DO NOT T OUCH THE LAMP SURF ACE. Please read the warnings on page 98 again. Also, replace the lamp with part number TS-CL1 10U only! The television is designed to work specifically with this lamp. Lamps other than TS-CL1 10U may cause malfunctions and/or other damage to the television. T[...]

102 W arning LED Messages Appendix While the power is on, and there is a problem with the TV , the TV changes to warning mode and informs you of the problem using the LED as follows. Then, the power turns of f automatically and performs the cooling for approximately 90 seconds. The LAMP/PROGRAM LED blinks Condition: It may be a malfunction of the i[...]

103 LCT1936 Eng+4pps.indd 103 LCT1936 Eng+4pps.indd 103 8/31/05 9:25:45 AM 8/31/05 9:25:45 AM[...]

104 LCT1936 Eng+4pps.indd 104 LCT1936 Eng+4pps.indd 104 8/31/05 9:25:45 AM 8/31/05 9:25:45 AM[...]

105 HD-ILA Device Projection T ype Reception Format Reception Range Power Source Power Consumption Model NTSC, BTSC System (Multi-Channel Sound) A TSC T errestrial, Digital Cable AC 120V , 60 Hz 215W 1 10W High-Pressure Mercury Lamp Screen Size Speakers 10 cm round X 2 Audio Output Full Range - 10W + 10W Antenna T erminal (VHF/UHF , A TSC/DIGITAL C[...]

106 Notes LCT1936 Eng+4pps.indd 106 LCT1936 Eng+4pps.indd 106 8/31/05 9:25:46 AM 8/31/05 9:25:46 AM[...]

107 Notes LCT1936 Eng+4pps.indd 107 LCT1936 Eng+4pps.indd 107 8/31/05 9:25:46 AM 8/31/05 9:25:46 AM[...]

108 Notes LCT1936 Eng+4pps.indd 108 LCT1936 Eng+4pps.indd 108 8/31/05 9:25:46 AM 8/31/05 9:25:46 AM[...]

109 Notes LCT1936 Eng+4pps.indd 109 LCT1936 Eng+4pps.indd 109 8/31/05 9:25:46 AM 8/31/05 9:25:46 AM[...]

11 0 Notes LCT1936 Eng+4pps.indd 110 LCT1936 Eng+4pps.indd 110 8/31/05 9:25:46 AM 8/31/05 9:25:46 AM[...]

111 Notes LCT1936 Eng+4pps.indd 111 LCT1936 Eng+4pps.indd 111 8/31/05 9:25:46 AM 8/31/05 9:25:46 AM[...]

JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 LCT1936 Eng+4pps.indd 112 LCT1936 Eng+4pps.indd 112 8/31/05 9:25:46 AM 8/31/05 9:25:46 AM[...]