Go to page of
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of JVC LPT0319-001A, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of JVC LPT0319-001A one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of JVC LPT0319-001A. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of JVC LPT0319-001A should contain:
- informations concerning technical data of JVC LPT0319-001A
- name of the manufacturer and a year of construction of the JVC LPT0319-001A item
- rules of operation, control and maintenance of the JVC LPT0319-001A item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of JVC LPT0319-001A alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of JVC LPT0319-001A, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the JVC service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of JVC LPT0319-001A.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the JVC LPT0319-001A item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
H R-S8700EK VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0319-001A 625 1 . , / ABC DEF GHI JKL MNO PQRS TUV WXYZ 23 456 789 1 2 1 2 3 VCR TV CABLE /SAT TV/VCR – –:– – AUDIO 0000 START DEBUT STOP FIN DATE PR DAILY/QTDN. VPS/PDC AUX WEEKLY/HEBDO EXPRESS LCD PROG 0 PROG NAVIGATION OK 3 4 4 MENU 30 SEC T V P R + T V P R – T V – T V + ENTER/ENTRE[...]
-
Page 2
2 SAFETY FIRST Safety Precautions Blue to N (Neutral) or Black Brown to L (Live) or Red 625 IMPORT ANT n Please read the various precautions on page 2 – 4 of this instruction manual before installing or operating the recorder . n It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of t[...]
-
Page 3
3 V ideo tapes recorded with this video recorder in the LP/EP (Long Play/Extended Play) mode cannot be played back on a single-speed video recorder . The ST ANDBY/ON button does not completely shut off mains power from the unit, but switches operating current on and off. " " shows electrical power standby and " " shows ON. Failu[...]
-
Page 4
4 This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the main[...]
-
Page 5
5 QUICK SET UP GUIDE 1 . , / ABC DEF GHI JKL MNO PQRS TUV WXYZ 2 3 4 5 6 7 8 9 1 2 1 2 3 VCR TV CABLE /SAT TV/VCR – – :– – AUDIO 0000 START DEBUT STOP FIN DATE PR DAILY/QTDN. VPS/PDC AUX WEEKLY/HEBDO EXPRESS LCD PROG 0 PROG NAVIGATION OK 3 4 4 MENU 30 SEC T V P R + T V P R – T V – T V + ENTER/ENTREE STEP 1 CHECK THE CONTENTS CHECK ALL T[...]
-
Page 6
6 PAUSE TELEC. AUDIO OUT SORTIE OUT SORTIE S AV1 (L-1) AV2 (L-2) IN/OUT ENTREE/SORTIE IN/DECODER ENTREE/DECODEUR SYNCHRO EDIT MONTAGE SYNCHRO SAT CONTROL CONTROLEUR SAT JLIP ANT. IN ANTENNE ENTREE ANTENNE SORTIE RF OUT A V CONNECTION T o connect to a TV with 21-pin A V input connector (SCART) . . . 1– Connect the aerial, recorder and TV as per ?[...]
-
Page 7
7 PAUSE TELEC. AUDIO OUT SORTIE OUT SORTIE S AV1 (L-1) AV2 (L-2) IN/OUT ENTREE/SORTIE IN/DECODER ENTREE/DECODEUR SYNCHRO EDIT MONTAGE SYNCHRO SAT CONTROL CONTROLEUR SAT JLIP ANT. IN ANTENNE ENTREE ANTENNE SORTIE RF OUT NOTES: ● Y ou can obtain high-quality S-VHS pictures. ● W ith S-VIDEO connection, you cannot use the Preset Download function. [...]
-
Page 8
8 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 QUICK SET UP GUIDE (cont.) STEP 3 AUTO SET UP SET THE TUNER CHANNELS, CLOCK, GUIDE PROGRAM NUMBERS AND VIDEO CHANNEL* The Auto Set Up function sets the tuner channels, clock, the VIDEO Plus+ system assigned Guide Program numbers and the video channel* automatically the first time the button on t[...]
-
Page 9
9 PRESET DOWNLOAD SET THE TUNER CHANNELS B Y DOWNLOADING FROM YOUR TV , CLOCK AND GUIDE PROGRAM NUMBERS Before performing the following procedure, make sure that: n the TV aerial cable is connected to the recorder and a 21-pin SCAR T cable is connected between your TV and the recorder . n the mains power cord is plugged into the mains outlet. n bat[...]
-
Page 10
10 IMPORT ANT n In certain reception conditions, station names may not be stored correctly , and auto Guide Program Number Set may not work properly . If the Guide Program numbers are not set properly , when you timer -record a TV programme using the VIDEO Plus+ system, the recorder will record a TV programme of a different station. When programmin[...]
-
Page 11
11 T -V LINK T -V Link Functions When you connect the recorder and your TV via a fully-wired 21-pin SCART cable ( Z pg. 6), the following functions are available. Y ou can use these functions only with a TV offering T-V Link, etc.* For details, refer to the instruction manual for your TV . * Compatible with TVs offering T -V Link, EasyLink, Megalog[...]
-
Page 12
12 Installing Satellite Contr oller SITUA TE SA TELLITE CONTROLLER 1 Place the Satellite Controller so that the path between its transmitter and the satellite receiver’ s remote sensor is unobstructed. A TT ACH SA TELLITE CONTROLLER 2 Fix securely using the adhesive strip attached on the back of the Satellite Controller . MAKE CONNECTIONS 3 Be su[...]
-
Page 13
13 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 NUMBER ACCESS SA T CONTROL SET SCREEN 4 Press %fi to move the highlight bar (pointer) to “SA T CONTROL SET”, then press OK or # . ENTER SA TELLITE RECEIVER’S BRAND 5 Press the appropriate NUMBER keys to enter the brand code from the list in the left column, then press OK . ● If the bra[...]
-
Page 14
14 BASIC OPERA TIONS Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the fron[...]
-
Page 15
15 A TTENTION ● In the high-speed search, still, slow-motion or frame-by- frame playback mode, ● the picture will be distorted. ● noise bars will appear . ● there will be a loss of colour with a tape recorded in LP/ EP mode. ● Noise may appear or the picture may appear distorted with an EP-recorded tape during still, slow-motion, frame-by[...]
-
Page 16
16 TV signals being received by the recorder ’ s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . BASIC OPERA TIONS (cont.) Recording T urn on the TV and select the VIDEO channel (or A V mode). LOAD A CASSETTE 1 Insert a cassette with the record safety tab intact (See below). ● [...]
-
Page 17
17 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 Record One Pr ogramme While W atching Another Elapsed Recording Time Indication Y ou can check the exact time of a recording. T ape Remaining Time DISPLA Y REMAINING TIME 1 Press – –:– – until the time remaining on the tape appears. ● The display panel shows the tape remaining time wi[...]
-
Page 18
18 ACCESS VIDEO PLUS+ SCREEN 1 Press PROG . The front display panel looks like this: ENTER PLUSCODE NUMBER 2 Press the NUMBER keys to enter the PlusCode number of the programme you wish to record, then press OK . ● If you make a mistake, press and input the correct number . The PlusCode number you enter appears on the front display panel: The dis[...]
-
Page 19
19 SET T APE SPEED 4 Press SP/LP/EP ( ) to set the tape speed. SET PDC MODE 5 Press PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC" is lit on the display panel, PDC is set to ON. If "VPS/PDC OFF" is displayed on the screen or "VPS/ PDC " is not lit on [...]
-
Page 20
20 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 OK WEEKLY 7 9 DAILY 6 Express Timer Pr ogramming BASIC OPERA TIONS (cont.) If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer -record the programme. START+/– 2,3 4 PROG 1,9 ACCESS VIDEO PLUS+ SCREEN 1 Press P[...]
-
Page 21
21 ENTER PRESET POSITION 6 Press PR +/– to enter the preset position corre- sponding to the broadcast- ing station you wish to record. SET T APE SPEED 7 Press SP/LP/EP ( ) to set the tape speed. SET PDC MODE 8 Press PDC to select "ON" or "OFF". If "VPS/PDC ON" is displayed on the screen or "VPS/ PDC" is lit[...]
-
Page 22
22 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 BASIC OPERA TIONS (cont.) Check, Cancel And Replace Pr ogrammes DISENGAGE TIMER MODE 1 Press ‰ , then press . ACCESS PROGRAMME CHECK SCREEN/DISPLA Y 2 Press . ACCESS PROGRAMME SCREEN/ DISPLA Y 3 Press again to check more information. Each time you press , the next programme's information[...]
-
Page 23
23 When programmes overlap each other If "PROGRAM OVERLAPPED" appears, you have another programme overlapping the programme you have just made. The Program Check screen appears and conflicting programmes will start blinking. EX. Programme 1 (you have just made) and Programme 4 overlap each other . CONFIRM OVERLAPPING PROGRAMMES 1 Overlapp[...]
-
Page 24
24 ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS VIDEO NA VIGA TION SCREEN 2 Press % fi to move the highlight bar (pointer) to "VIDEO NA VIGA TION", then press OK or # . Check Memor y Y ou can check the amount of recorded information in the memory . LOAD A RECORDED CASSETTE 1 Insert a cassette recorded on this recorder . ● While "[...]
-
Page 25
25 VIDEO NAVIGA TION EDIT TITLE FIND TITLE FIND BLANK SP ACE CHECK MEMORY NA VIGA TION : ON [ 5∞ ] = [MENU] : EXIT NOTES: ● V ideo Navigation is possible with the cassettes recorded with this recorder only . ● T o record the date and time as the programme title in this recorder's memory , make sure the recorder's clock is set correc[...]
-
Page 26
26 Title Editing T urn on the TV and select the A V mode. Y ou can edit the tape title and the programme titles as you like. Y ou can also select the category in the programme title. In short, you can use the V ideo Navigation function to create your own video tape library . 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 NUMBER MENU OK VIDEO N[...]
-
Page 27
27 ENTER CHARACTER 6 Press NUMBER keys and # to enter characters, then press OK . For details, refer to "Entering Character" below . RETURN TO NORMAL SCREEN 7 Press MENU . Entering Character Press the appropriate NUMBER key , then press # to enter each character . Refer to the example below . (Ex.) Enter "JVC NEWS" 1 Press 5 (JK[...]
-
Page 28
28 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 MENU OK VIDEO NA VIGA TION (cont.) Edit Programme Title And Categor y SELECT PROGRAMME 1 Press % fi to move the highlight bar (pointer) to the programme you want to edit, then press OK or # . The "TITLE" display begins blinking. ENTER CHARACTER 2 Press NUMBER keys and # to enter char[...]
-
Page 29
29 Delete Pr ogramme Data SELECT PROGRAMME 1 Press % fi to move the highlight bar (pointer) to the programme you want to delete, then press . DELETE PROGRAMME DA T A 2 Press % fi to move the highlight bar (pointer) to "YES", then press OK or # . RETURN TO NORMAL SCREEN 3 Press MENU . Perform steps 1 to 4 of "Edit T ape Title" [...]
-
Page 30
30 VIDEO NA VIGA TION (cont.) Sor ting By T ape Number This function is useful for finding out the programme you want to playback in the order sorted by tape number . FIND TITLE BY T APE NO. BY DA TE BY CA TEGORY [ 5∞ ] = [MENU] : EXIT ] 1/100 0999 BBC2 1900 28.12.99 0999 F1 BRAZIL 28.12.99 0999 007 GOLDE 25.12.99 0999 BBC1 2100 30.11.99 0998 ZDF[...]
-
Page 31
31 ACCESS CA TEGOR Y SCREEN 1 Press % fi to move the highlight bar (pointer) to "BY CA TEGORY", then press OK or # . SELECT CA TEGORY 2 Press % fi to move the highlight bar (pointer) to the category you want to watch, then press OK . SELECT PROGRAMME 3 Press % fi to move the highlight bar (pointer) to the programme you want to play bac[...]
-
Page 32
24 ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS VIDEO NA VIGA TION SCREEN 2 Press % fi to move the highlight bar (pointer) to "VIDEO NA VIGA TION", then press OK or # . Check Memor y Y ou can check the amount of recorded information in the memory . LOAD A RECORDED CASSETTE 1 Insert a cassette recorded on this recorder . ● While "[...]
-
Page 33
25 VIDEO NAVIGA TION EDIT TITLE FIND TITLE FIND BLANK SP ACE CHECK MEMORY NA VIGA TION : ON [ 5∞ ] = [MENU] : EXIT NOTES: ● V ideo Navigation is possible with the cassettes recorded with this recorder only . ● T o record the date and time as the programme title in this recorder's memory , make sure the recorder's clock is set correc[...]
-
Page 34
26 Title Editing T urn on the TV and select the A V mode. Y ou can edit the tape title and the programme titles as you like. Y ou can also select the category in the programme title. In short, you can use the V ideo Navigation function to create your own video tape library . 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 NUMBER MENU OK VIDEO N[...]
-
Page 35
27 ENTER CHARACTER 6 Press NUMBER keys and # to enter characters, then press OK . For details, refer to "Entering Character" below . RETURN TO NORMAL SCREEN 7 Press MENU . Entering Character Press the appropriate NUMBER key , then press # to enter each character . Refer to the example below . (Ex.) Enter "JVC NEWS" 1 Press 5 (JK[...]
-
Page 36
28 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 MENU OK VIDEO NA VIGA TION (cont.) Edit Programme Title And Categor y SELECT PROGRAMME 1 Press % fi to move the highlight bar (pointer) to the programme you want to edit, then press OK or # . The "TITLE" display begins blinking. ENTER CHARACTER 2 Press NUMBER keys and # to enter char[...]
-
Page 37
29 Delete Pr ogramme Data SELECT PROGRAMME 1 Press % fi to move the highlight bar (pointer) to the programme you want to delete, then press . DELETE PROGRAMME DA T A 2 Press % fi to move the highlight bar (pointer) to "YES", then press OK or # . RETURN TO NORMAL SCREEN 3 Press MENU . Perform steps 1 to 4 of "Edit T ape Title" [...]
-
Page 38
30 VIDEO NA VIGA TION (cont.) Sor ting By T ape Number This function is useful for finding out the programme you want to playback in the order sorted by tape number . FIND TITLE BY T APE NO. BY DA TE BY CA TEGORY [ 5∞ ] = [MENU] : EXIT ] 1/100 0999 BBC2 1900 28.12.99 0999 F1 BRAZIL 28.12.99 0999 007 GOLDE 25.12.99 0999 BBC1 2100 30.11.99 0998 ZDF[...]
-
Page 39
31 ACCESS CA TEGOR Y SCREEN 1 Press % fi to move the highlight bar (pointer) to "BY CA TEGORY", then press OK or # . SELECT CA TEGORY 2 Press % fi to move the highlight bar (pointer) to the category you want to watch, then press OK . SELECT PROGRAMME 3 Press % fi to move the highlight bar (pointer) to the programme you want to play bac[...]
-
Page 40
32 Y our video recorder is equipped with automatic tracking control. For most tapes this will automatically adjust the tracking to suit the particular tape you are playing. In some circumstances it may be necessary to make manual tracking adjustments. This is usually only associated with old or worn tapes or recordings made on old or worn recorders[...]
-
Page 41
33 Digital 3R Digital 3R picture system applies edge correction to the luminance signal to enhance detail. ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS MODE SET SCREEN 2 Move the highlight bar (arrow) to "MODE SET" by pressing %fi , then press OK or # . SELECT DIGIT AL 3R SET MODE 3 Move the highlight bar (arrow) to "DIGIT AL 3R&qu[...]
-
Page 42
34 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 Selecting The Sound Y ou W ant AUDIO ADV ANCED OPERA TIONS (cont.) OK MENU Audio Recording Level Contr ol In most cases, setting the audio recording level control to the centre position will provide satisfactory results. If necessary , you can adjust the audio recording level more precisely by [...]
-
Page 43
35 Soundtrack Selection Y our video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select. During Playback Pressing AUDIO on the remote control changes the soundtrack being played back as follows: TRACK Recorder's Front Panel On-Screen Display USE + HI FI For Hi-Fi stereo tapes LR [...]
-
Page 44
36 ADV ANCED OPERA TIONS (cont.) 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 Index Search Y our recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode. ACTIV A TE INDEX[...]
-
Page 45
37 Super VHS (S-VHS), S-VHS ET and VHS Y our recorder can record in S-VHS, S-VHS ET or VHS. T o record in S-VHS: Perform the steps 1 – 4 below to set "S-VHS" to "O N ". Then, insert a cassette marked "S-VHS", the S-VHS indicator will light on the display panel. The S-VHS recording mode will be selected. T o record in[...]
-
Page 46
38 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 ADV ANCED OPERA TIONS (cont.) Playback/ Recording According T o T ape Charac- teristics The B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback p[...]
-
Page 47
39 Recording ST ART RECORDING 1 Press and hold RECORD and press PLA Y on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording. NOTES: ● The B.E.S.T . system works for both SP and LP (or EP) modes only after a tap[...]
-
Page 48
40 PAUSE TELEC. AUDIO OUT SORTIE OUT SORTIE S AV1 (L-1) AV2 (L-2) IN/OUT ENTREE/SORTIE IN/DECODER ENTREE/DECODEUR SYNCHRO EDIT MONTAGE SYNCHRO SAT CONTROL CONTROLEUR SAT JLIP ANT. IN ANTENNE ENTREE ANTENNE SORTIE RF OUT This facility allows you to record automatically a satellite programme which is timer -programmed on your external satellite recei[...]
-
Page 49
41 A TTENTION ● Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the recorder will start recording when the satellite receiver's power is turned on. ● If you have connected another appliance other than a satellite receiver to the A V2 (L-2) IN/DECODER connector , be sure not to engage the Auto Sate[...]
-
Page 50
42 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 ADV ANCED OPERA TIONS (cont.) Remote Contr ol Functions Remote A/B Code Switching The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’ s A code control signals and another set to respond to B code control signals. The re[...]
-
Page 51
43 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 OK TV PR +/– TV +/– Contr ol Y our TV Using Additional Buttons Use the NUMBER keys, and the button, button or ‰ button to select the TV’ s channel . ● W ith televisions under Code 01, 02, 07, 10, 1 1, 14, 20, 23, 24, 25, 27, 33 or 35, the button corresponds to the 1-digit/2-digit entr[...]
-
Page 52
44 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 NUMBER TV PR +/– VCR OK CABLE/SAT ADV ANCED OPERA TIONS (cont.) Satellite Receiver Multi- Brand Remote Control Y our remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer ’ s satellite receivers can also be [...]
-
Page 53
45 Minimizing Picture Degradation While Editing T urn on the TV and select the VIDEO channel (or A V mode). 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –: – – 0 3 4 4 OK Picture Contr ol This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUT O." ACCESS MAIN MENU SCREEN 1 Press ME[...]
-
Page 54
46 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 Edit Fr om A Camcorder AUX PR Y ou can use a camcorder as the source player and your video recorder as the recorder . MAKE CONNECTIONS 1 A If the camcorder has no S-VIDEO output connector ... ... connect the camcorder ’ s AUDIO/VIDEO OUT connectors to the recorder ’ s front panel AUDIO/ VID[...]
-
Page 55
47 The Synchro Editing function synchronizes the start of the playback and recording operations when starting an edit operation using a camcorder equipped with a LANC connector and your video recorder . Synchr o Editing MAKE CONNECTIONS 1 Connect your recorder to camcorder ( Z pg. 46), and connect your recorder's SYNCHRO EDIT connector to the [...]
-
Page 56
48 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the source player or as the recording deck. MAKE CONNECTIONS 1 Connect the player ’ s 21-pin SCART connector to the recorder ’ s 21-pin SCART connector as illustrated on page 49. A When Using Y our V ideo Recorder[...]
-
Page 57
49 RF Cable (provided) 21-pin SCAR T Cable (not provided) Player Y our recorder Recorder Y our recorder TV Receiver TV Receiver RF Cable (provided) 21-pin SCAR T Cable (not provided) VIDEO CHAN- NEL or A V mode VIDEO CHANNEL or A V mode Another recorder Another recorder Recorder Player A B NOTES: ● All necessary cables can be obtained from your d[...]
-
Page 58
50 ADV ANCED OPERA TIONS (cont.) OUTPUT/INPUT SET L-1 OUTPUT VIDEO L-1 INPUT VIDEO L-2 SELECT A/V L-2 INPUT VIDEO [ 5∞ ] = [MENU] : EXIT L-2 SELECT/INPUT Setting The A V2 (L-2) IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set [...]
-
Page 59
51 Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. A TTENTION: Audio dubbing is not possible with a cassette recorded in EP mode. Audio Dubbing Original sound AUDIO OUT Audio mixer MAKE CONNECTIONS 1 Connect an audio component to the AUDIO L + R connectors on the recorder's front panel. ● Wh[...]
-
Page 60
52 Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously . Use your video recorder as the recorder . A TTENTI[...]
-
Page 61
53 ENGAGE INSER T EDITING 6 Press INSERT . ● Y our recorder enters the Insert-Pause mode. (" ", " " and " " light up on the front display panel.) ● The TV screen changes from the still picture to the input source you are going to record. ST ART EDITING 7 Load the source cassette and play back the segment that is to[...]
-
Page 62
54 Information On J T erminal J T erminal (JLIP(Joint Level Inter face Protocol) Connector) The J T erminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations. Examples: W ith the optional JLIP VIDEO CAPTURE BOX GV -CB3E: ● Allows you t[...]
-
Page 63
55 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 OK T urn on the TV and select the VIDEO channel (or A V mode). On-Screen Display NOTES: ● When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting. ● During playback, the operation mode indicators may sometimes be disturbed d[...]
-
Page 64
56 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 REW PLAY OK Power Save Mode Y ou can reduce the power consumption while the recorder is turned off. ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS MODE SET SCREEN 2 Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or # . SELECT POWER SA VE MODE 3 Press %fi t[...]
-
Page 65
57 Auto SP → LP Timer If, when timer -recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording. For Example . . . Recording a programme of 210 minutes in length onto a 180- minute tape NOTES: ● The Auto SP → LP T imer feature is not available duri[...]
-
Page 66
58 Repeat Playback Y our video recorder can automatically play back the whole tape 100 times repeatedly . ST ART PLA YBACK 1 Press PLA Y . ACTIV A TE REPEA T PLA YBACK 2 Press PLA Y and hold for over 5 seconds, then release. ● The Play indicator ( ) on the display panel blinks slowly . ● The tape plays 100 times automatically , and then stops. [...]
-
Page 67
59 PAUSE TELEC. AUDIO OUT SORTIE OUT SORTIE S AV1 (L-1) AV2 (L-2) IN/OUT ENTREE/SORTIE IN/DECODER ENTREE/DECODEUR SYNCHRO EDIT MONTAGE SYNCHRO SAT CONTROL CONTROLEUR SAT JLIP ANT. IN ANTENNE ENTREE ANTENNE SORTIE RF OUT I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I I Connection T o A Stereo System These instruc[...]
-
Page 68
60 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 SUBSIDIARY SETTINGS V ideo Channel Set V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. With A V or S-VIDEO Connection ACCESS VIDEO CHANNEL SET MODE 1 Press and hold down STOP on the recorder unti[...]
-
Page 69
61 Before performing the following procedure, make sure that: n the mains power cord is plugged into the mains outlet. n the video recorder is turned off and there is no cassette inserted in the recorder . n the connected TV is turned on. n batteries have been installed in the remote control. ACCESS VIDEO CHANNEL SET MODE 1 Press and hold down STOP[...]
-
Page 70
62 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 OK MENU SUBSIDIARY SETTINGS (cont.) T uner Set IMPORT ANT Perform the following steps only if — — Auto Channel Set has not been set correctly by Auto Set Up function ( Z pg. 8) or Preset Download ( Z pg. 9). — you have moved to a different area or if a new station starts broadcasting in y[...]
-
Page 71
63 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 VIEW CONFIRMA TION SCREEN 4 After "SCAN COMPLETED" is displayed on the screen for about 5 seconds, a Confirmation screen looking like the one on the right appears. The stations your recorder located appear on a Confirmation screen — preset positions (PR), channels (CH) and station n[...]
-
Page 72
64 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 SUBSIDIARY SETTINGS (cont.) Storing Channels Manually T o store channels that were not stored during Auto Set Up ( Z pg. 8), Preset Download ( Z pg. 9) or Auto Channel Set ( Z pg. 62). ACCESS MAIN MENU 1 Press MENU . ACCESS CONFIRMA TION SCREEN 2 Press %fi to move the highlight bar (pointer) t[...]
-
Page 73
65 Perform steps 1 and 2 of "Storing Channels Manually" on page 64 to access the C onfirmation screen before continuing. Change Station Preset Position SELECT ITEM 1 Press %fi @ # until the item you want to move begins blinking. Then press OK and the station name (ID) and its channel (CH) number begin blinking. SELECT NEW POSITION 2 Pres[...]
-
Page 74
66 SUBSIDIARY SETTINGS (cont.) SELECT ST A TION NAME CHARACTER 1 Press # until the first letter of the station name begins blinking. ENTER NEW CHARACTER 2 Press %fi to cycle through the characters (A–Z, 0–9, –, * , +, (space) ) and stop when the desired character is indicated, then press # to enter . Enter the remaining characters the same w[...]
-
Page 75
67 TV Station And ID List ST ATION NAME ID* Anglia TV ANGL ARD ARD AR TE AR TE BBC Group BBC BBC1 BBC1 BBC2 BBC2 Berlin 1 BLN1 Berlin 2 BLN2 Border TV BORD Bayern1 BR1 Bayern3 BR3 BR T1 BR T1 BR T2 BR T2 Children Ch CHLD Canal + CH+ CNN CNN Channel TV CHNL Central TV CNTR Channel 4 CH 4 Channel 5 CH 5 DRS DRS DR TV DR TV DSF DSF Euronews EURN Euron[...]
-
Page 76
68 SUBSIDIARY SETTINGS (cont.) TV Station Channel Number Guide Only the main stations are listed. There are in addition many relay stations, and full lists are available from the BBC and ITV . BBC1 BBC2 ITV CH4 CH5 London & South-East Bluebell Hill ......................... 40 46 43 65 — Crystal Palace ....................... 26 33 23 30 37 D[...]
-
Page 77
69 1 2 3 4 5 6 7 8 9 1 2 1 2 3 – –:– – 0 3 4 4 Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "ON"). Press OK u[...]
-
Page 78
70 VIDEO Plus+ ® System Setup IMPORT ANT Normally , Auto Set Up ( Z pg. 8), Preset Download ( Z pg. 9) or Auto Channel Set ( Z pg. 62) sets the Guide Program Numbers automatically . Y ou need to set the Guide Program Numbers manually only in the following cases. ● When timer-programming with the VIDEO Plus+ system, the preset position, where the[...]
-
Page 79
71 A TTENTION This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the recorder off and unplug the mains power cord. Then plug it in again and turn the recorder on. T ake out the cassette. After checking the cassette, operate the unit as usual. Questions And Answers PLA Y[...]
-
Page 80
72 Before requesting service for a problem, use this chart to see if you can correct the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is disconnected. ● “ ‰ “ is displayed on the display panel with Auto T[...]
-
Page 81
73 CORRECTIVE ACTION Re-perform the clock and/or timer settings. Press ‰ and confirm that “ ‰ “ is displayed on the display panel. T imer programming can’t be performed while a timer recording is in progress. W ait until it finishes. Load a cassette with the Record Safety tab intact, or cover the hole using adhesive tape. Remove the casse[...]
-
Page 82
74 CORRECTIVE ACTION Position the camcorder so its microphone is away from the TV . T urn the TV’ s volume down. If you need the skipped channels, restore them ( Z pg. 64). Press P AUSE to pause the recording, change presets, then press PLA Y to resume recording. Perform manual setting again. T urn off the recorder once and connect the TV aerial [...]
-
Page 83
75 FRONT VIEW SYNCHRO 1 2 4 3 5 7 6 ^ % @ 8 9 ! 0 e #$ &* ( ) 1.2 pt q w r Index 1 ST ANDBY/ON Button turns recorder on/off (loading a cassette also turns power on). 2 ‰ (TIMER) Button engages timer -standby mode. Z pg. 19, 21 3 S-VHS ET Button enables/disables S-VHS ET mode; lights up during S-VHS ET mode. Z pg. 37 4 STOP/EJECT Button stops [...]
-
Page 84
76 PAUSE TELEC. AUDIO OUT SORTIE OUT SORTIE S AV1 (L-1) AV2 (L-2) IN/OUT ENTREE/SORTIE IN/DECODER ENTREE/DECODEUR SYNCHRO EDIT MONTAGE SYNCHRO SAT CONTROL CONTROLEUR SAT JLIP ANT. IN ANTENNE ENTREE ANTENNE SORTIE RF OUT 1 ! 0 3 2 5 7 9 8 4 ! 6 1 Mains Power Cord supplies power to recorder . Z pg. 6 2 S OUT Connector enables S-VIDEO connection t[...]
-
Page 85
77 1 B.E.S.T . Picture System Display lights from bottom to top while B.E.S.T . is active. Z pg. 38 Audio Level Indicator displays audio input and output levels. Z pg. 34 2 Programme Time Indicators show the programme start time ( ) and the programme stop time ( ) for timer -recording. Z pg. 20 3 Symbolic Mode Indicators 4 "Timer" Indicat[...]
-
Page 86
78 REMOTE CONTROL SUBSIDIARY INFORMA TION (cont.) 1 . , / ABC DEF GHI JKL MNO PQRS TUV WXYZ 2 3 456 789 1 2 1 2 3 VCR TV CABLE /SAT TV/VCR – –: – – AUDIO 0000 START DEBUT STOP FIN DATE PR DAILY/QTDN. VPS/PDC AUX WEEKLY/HEBDO EXPRESS LCD PROG 0 PROG NAVIGATION OK 3 4 4 MENU 30 SEC T V P R + T V P R – T V – T V + ENTER/ENTREE W q T 3 9 7 [...]
-
Page 87
79 How T o Use The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. ( Z pg. 43, 44) ● Point the remote control toward the sensor window . ● The maximum operating distance of the remote control is about 8 m. NOTES: ● When inserting th[...]
-
Page 88
HR-S8700EK COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD. EK Printed in Germany 0600IYV * ID * JVE V ICTOR COM P ANY OF JAPAN, LIMITED GENERAL Power requirement : AC 220 V – 240 V ` , 50 Hz/60 Hz Power consumption Power on : 25 W Power off : 5.2 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal [...]