JVC RX-6030VBK manual

LVT0984-001B [J] INSTR UCTIONS A UDIO/VIDEO CONTR OL RECEIVER RX-6030VBK/RX-6032VSL RX-5030VBK/RX-5032VSL For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. DIGITAL AUTO SPK ONE TOUCH OPERATION BASS BOOST [...]

Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. Attention –– Commutateur STANDBY/ON ! Déconnecter la fiche de secteur pour couper complètement le courant. Le commutateur STANDBY/ON ne coup[...]

1 T able of Contents T able of Contents Parts Identification ...................................... 2 Getting Started ........................................... 5 Before Installation ............................................................. 5 Checking the Supplied Accessories ................................. 5 Connecting the AM and FM Antenna[...]

2 Par ts Identification See pages in parentheses f or details. 1 ST ANDBY/ON button and ST ANDBY lamp (11) 2 SURROUND/DSP OFF b utton (26, 27) 3 DSP button (27) 4 SURROUND b utton (26) 5 Remote sensor (10) 6 Displa y (F or details, see “Display” on the next page .) 7 • INPUT ANALOG button (17) • INPUT A TT button (18) 8 INPUT DIGIT AL butto[...]

3 Parts Identification Display See pages in parentheses f or details. 1 ANALOG indicator (17) 2 DIGIT AL A UT O indicator (17) 3 SPK indicator (13) 4 Speaker indicators and signal indicators (27) 5 PRO LOGIC II indicator (24, 26) 6 DSP indicator (25, 27) 7 H.PHONE indicator (13) 8 RX-6030VBK and RX-6032VSL only: BASS BOOST indicator (18) 9 TUNED in[...]

4 Par ts Identification Rear Panel—RX-5030VBK/RX-5032VSL See pages in parentheses f or details. 1 DIGIT AL IN ter minals (10) • Coaxial: DIGIT AL 1 (D VD) • Optical: DIGIT AL 2 (CD) 2 Audio input/output terminals (6 – 9) • Audio components: CD IN, T APE/CDR • Video components: VCR, TV SOUND IN, D VD IN • SUBWOOFER OUT 3 COMPU LINK-4 t[...]

5 AM LOOP FM 75 COAXIAL AM EXT ANTENNA FM 75 COAXIAL FM 75 CO A XIAL 7 How to connect the AM antenna cor d 1 Open the terminal. 2 Insert the AM antenna cord. 3 Close the terminal. Notes: • If the AM loop antenna wire is covered with vin yl, remov e the vinyl b y twisting it as shown to the right. • Make sure the antenna conductors do not touch [...]

6 Getting Star ted 7 Speaker lay out diagram Connecting the Speakers and Subwoofer Y ou can connect fiv e speakers — a pair of front speak ers, a center speaker , and a pair of surround speakers — and a subwoof er . CA UTION: Use speakers with a SPEAKER IMPED ANCE as indicated b y the speaker terminals. 7 Connection diagram 7 How to connect spe[...]

7 CD IN OUT (REC) IN (PLA Y) OUT (REC) VCR TV SOUND IN AUDIO RIGHT LEFT IN (PLA Y) T APE /CDR R R L R L L Connecting Audio/V ideo Components T urn the power off to all components bef ore making connections. Y ou can connect the f ollowing audio/video components to this receiv er . Refer also to the man uals supplied with your components. • Audio [...]

8 Å To left/right audio input ı To left/right audio output Ç To composite video output Î To composite video input RX-6030VBK and RX-6032VSL only ‰ To S-video input Ï To S-video output Ì To component video output Getting Star ted Rear panel VCR TV Å To audio output ı To composite video input RX-6030VBK and RX-6032VSL only Ç To S-video inp[...]

9 Rear panel Getting Started DV D RX-6030VBK/RX-6032VSL Å T o surround left/right audio output ı T o center audio output Ç T o subwoofer audio output Î T o front left/right audio output ‰ T o composite video output Ï T o S-video output Ì T o component video output Å T o audio output ı T o composite video output T o use software encoded wi[...]

10 Digital Connections This receiv er is equipped with two DIGIT AL IN ter minals — one digital coaxial terminal and one digital optical ter minal. Y ou can connect an y component to one of the digital ter minals using a digital coaxial cable (not supplied) or digital optical cable (not supplied). Digital coaxial cable Digital optical cable IMPOR[...]

11 T APE/CDR * : Select the cassette deck (or the CD recorder). FM (front panel): Select an FM broadcast. AM (front panel): Select an AM broadcast. FM/AM * (remote control): Select an FM or AM broadcast. • Each time you press the b utton, the band alternates between FM and AM. RX-5030VBK/RX-5032VSL On the front panel F rom the remote control D VD[...]

12 Basic Operations DIGITAL AUTO SPK ONE TOUCH OPERATION BASS BOOST PRO LOGIC DSP H.PHONE AUTO MUTING TUNED STEREO TA NEWS INFO VOLUME INPUT ATT EON RDS SLEEP CH – 12 ANALOG L LINEAR PCM DIGITAL C R S.WFR LFE LS RS S STANDBY STANDBY/ON DIGITAL PRO LOGIC DIGITAL SURROUND SURROUND DSP DVD MULTI FM MODE MEMORY ON/OFF FM/AM TUNING DVD VCR TV SOUND SU[...]

13 Adjusting the V olume On the front panel T o increase the volume, turn MASTER V OLUME control clockwise . T o decrease the volume, turn MASTER V OLUME control counterclockwise . From the remote control T o increase the volume, press VOLUME + . T o decrease the volume, press VOLUME − . The volume le v el can be adjusted within a range of “0?[...]

14 Basic adjustment auto memory This receiver memoriz es sound settings for each source when—: • y ou tur n off the power , • y ou change the source, and • you assign the source name . When you change the source , the memorized settings f or the newly selected source are automatically recalled. The f ollowing can be stored f or each source:[...]

15 4 T urn MUL TI JOG dial to adjust the selected item. Select “SUBWOOFER YES” if a subwoof er is connected. Ex.: When “SUBWOOFER YES” is selected. 5 Press EXIT . T o adjust other items, repeat steps 2 to 5 . T o finish the setting, go to step 6 . 6 Press EXIT again. The receiver e xits from the basic setting mode. Setting the Speaker Infor[...]

16 7 Speaker distance — DIST ANCE UNIT , FRNT DIST ANCE, CNTR DIST ANCE, SURR DIST ANCE Select the unit to measure the distance between y our listening position and speakers—“METER” or “FEET . ” After selecting the measuring unit, select the appropriate speaker distance f or each speak er within the range of “0.3m” (“1FT”) to ?[...]

17 Basic Settings If the f ollowing symptoms occur while pla ying Dolb y Digital or DTS encoded software with “DIGIT AL A UT O” selected, change the digital input mode. • Sound does not come out at the beginning of pla yback. • Noise comes out while searching or skipping chapters or tracks . Press INPUT DIGIT AL on the front panel repeatedl[...]

18 Notes: • This button does not work when the subwoof er is set to “NO” (see page 15). In this case , “NO SUBW OOFER” will appear on the displa y for a while . • Y ou cannot tur n off the subwoofer when the front speak er size is set to “SMALL. ” • When you change the subwoof er from “NO” to “YES , ” the subwoof er is aut[...]

19 2 T urn MUL TI JOG dial to select an item y ou want to adjust. * These adjustments will depend on the f ollowing settings: • Subwoofer inf ormation • Speaker size setting • The current Surround/DSP mode F or details, see the ne xt page and “Adjustab le items and selected Surround/DSP mode” on page 27. 3 Press SET . The current setting [...]

20 7 P anorama control f or Pro Logic II Music — P ANORAMA CTRL Y ou can turn on or off the P anorama control f or Pro Logic II Music only when “ PL II MUSIC ” is activated. Select “ P ANORAMA ON ” to enjo y “ wraparound ” sound eff ect with side-wall image ( “ OFF ” is the initial setting). • F or Pro Logic II Music, see page 2[...]

21 5 Press TEST again to stop the test tone. Adjusting Subwoofer Output Level Make sure the subw oofer is set to “YES” (see page 15). 1 Press SOUND . The 10 ke ys are activated f or sound adjustments. 2 Press SUBWFR. 3 Press LEVEL +/– to adjust the subw oofer output level (–10 to +10). When you press the b utton once, the current setting of[...]

22 T uner Operations T uning in to Stations Manually 1 Select the band (FM or AM). RX-6030VBK/RX-6032VSL Press FM or AM on the front panel. The last receiv ed station of the selected band is tuned in. • When using the remote control, press FM/AM. The last received station of the last selected band is tuned in. Each time you press the b utton, the[...]

23 3 Press FM/AM PRESET 5 / ∞ to select a channel number while the c hannel number position is flashing. Ex.: When channel number “ 3 ” is selected. 4 Press MEMOR Y again while the selected channel number is flashing on the displa y . The selected channel number stops flashing. The station is assigned to the selected channel number . 5 Repeat[...]

24 Dolby Digital 5.1 channel encoding method (so-called discrete multi-channel digital audio f ormat) records and digitally compresses the left front channel, right front channel, center channel, left surround channel, right surround channel, and LFE channel signals. Since each channel is completely independent from the other channel signals to av [...]

25 DSP modes 7 DAP (Digital Acoustic Processor) modes D AP modes hav e been designed to create impor tant acoustic surround elements. The sound heard in a live club , dance club, hall or pa vilion consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflec[...]

26 Make sure that you ha ve set the speaker inf ormation correctly (see pages 15 and 16). • If only the front speakers are connected, y ou cannot use Surround/DSP modes. • Y ou cannot use DSP modes if no surround speak ers are connected. • Do not change the speaker setting while using an y Surround/DSP modes; otherwise, the Surround/DSP modes[...]

27 Signal and speaker indicators on the display Signal indicators Speaker indicators The f ollowing signal indicators light up—: L: • When digital input is selected: Lights up when the left channel signal comes in. • When analog input is selected: Alwa ys lights up . R: • When digital input is selected: Lights up when the right channel sign[...]

28 From the remote control D VD MUL TI 1 Press D VD MUL TI. Note: When you select “D VD MUL TI” as the source to pla y , Surround/ DSP mode is canceled, and SURROUND and DSP b uttons do not work. 2 Select the analog discrete output mode on the D VD pla yer , and start playing a D VD. • Ref er also to the manual supplied with the D VD pla yer [...]

29 The COMPU LINK remote control system allows y ou to operate JVC’ s audio components through the remote sensor on the receiver . T o use this remote control system, you need to connect JVC’ s audio components through the COMPU LINK-4 (SYNCHRO) jacks (see belo w) in addition to the connections using cables with RCA pin plugs (see page 7). • [...]

30 Notes: • Y ou can connect to the TV with the A V COMPU LINK III or A V COMPU LINK EX terminal. A TV with A V COMPU LINK RECEIVER/AMP ter minal can not be used. • When connecting the receiver and a TV with the A V COMPU LINK EX terminal by using a component video cab le, y ou cannot use the Automatic Selection of TV ’ s Input Mode (see page[...]

31 Notes: • When connecting only the VCR or D VD play er to this receiver , connect it directly to the receiv er using cables with the monaural mini-plugs. • Make sure that the remote control code of the VCR connected to the VCR jacks is set to code “ A. ” • Refer also to the man uals supplied with your video components . 7 Connecting pro[...]

32 Operating JVC’ s Audio/V ideo Components Y ou can use the remote control to operate other JVC components. Operating Audio Components IMPORT ANT: T o oper ate JVC’ s audio components using this remote control: • Y ou need to connect JVC’s audio components through the COMPU LINK-4 (SYNCHRO) jac ks (see page 29) in addition to the connectio[...]

33 CD changer After pressing CD-DISC, y ou can use the f ollowing b uttons f or the CD changer operations: 3 Star t playbac k. 4 Return to the beginning of the current (or pre vious) tracks . ¢ Skip to the beginning of the ne xt tracks . 7 Stop pla yback. 8 P ause pla yback. T o release, press 3 . 1 – 6, 7/P Select the number of a disc installed[...]

34 VCR Y ou can alwa ys use the follo wing buttons: ST ANDBY/ON VCR T ur n on or off a VCR. VCR CH +/ – Change the TV channels on the VCR. After pressing VCR, y ou can use the follo wing b uttons for the VCR operations: 3 Star t playbac k. FF F ast wind a tape . REW Rewind a tape . 7 Stop pla yback or recording. 8 P ause pla yback. T o release, p[...]

35 Operating Other Manufactur ers’ V ideo Equipment By changing the transmission signals, y ou can use the remote control supplied f or this unit to operate other manuf acturers’ equipment. • Refer also to the man uals supplied f or the other products. • T o operate these components with the remote control, first you need to set the man ufa[...]

36 T o change the transmission signals for operating a DVD player 1 Press and hold ST ANDBY/ON DV D. 2 Press D VD . 3 Enter manufacturer ’ s codes using b uttons 1 – 9, and 0. 4 Release ST ANDBY/ON DV D. Now , you can use the f ollowing b uttons on the D VD play er . 3 Star t playbac k. 7 Stop pla yback. ¢ Skip to the beginning of the ne xt ch[...]

37 Operating Other Manufactur ers’ Video Equipment/T roubleshooting T r oubleshooting Use this char t to help you solv e daily operational prob lems. If there is any problem y ou cannot solv e, contact y our JVC ser vice center . SOLUTION Plug the power cord into an AC outlet. Check speaker wiring and reconnect if necessary. Select the correct so[...]

38 Specifications Designs & specifications are subject to change without notice. RX-6030VBK/RX-6032VSL Amplifier Output P ower: At Stereo operation: F ront channels: 100 W per channel, min. RMS, driven into 8 Ω , 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion. At Surround operation: F ront channels: 100 W per channel, min. R[...]

39 Specifications RX-5030VBK/RX-5032VSL Amplifier Output P ow er : At Stereo operation: F ront channels: 100 W per channel, min. RMS, driven into 8 Ω , 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion. At Surround operation: F ront channels: 100 W per channel, min. RMS , driven into 8 Ω at 1 kHz with no more than 0.8% total harm[...]

THIS LIMITED W ARRANTY IS V ALID ONL Y IN THE FIFTY (50) UNITED ST A TES, THE DISTRICT OF COLUMBIA AND IN COMMONWEAL TH OF PUERTO RICO. WHA T WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner . Such repair and replacement services shall be rendered by JVC during norma[...]

QUALITY SER VICE HOW TO LOCA TE YOUR JVC SER VICE CENTER Dear Customer , In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary , please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www .JVC.com Remember t[...]

EN 0103NHMMDWJEIN J V C VICTOR COMP ANY OF JAP AN , L IMITED © 2002 VICTOR COMPANY OF JAPAN, LIMITED Cover_RX-60_5030[J]f 03.1.7, 18:16 2[...]

LVT0984-002A [C] For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. DIGITAL AUTO SPK ONE TOUCH OPERATION BASS BOOST PRO LOGIC DSP H.PHONE AUTO MUTING TUNED STEREO TA NEWS INFO VOLUME INPUT ATT EON RDS SLEE[...]

Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. Attention –– Commutateur STANDBY/ON ! Déconnecter la fiche de secteur pour couper complètement le courant. Le commutateur STANDBY/ON ne coup[...]

1 English T able of Contents Parts Identification ...................................... 2 Getting Started ........................................... 5 Before Installation ............................................................. 5 Checking the Supplied Accessories ................................. 5 Connecting the AM and FM Antennas .........[...]

2 English Par ts Identification See pages in parentheses f or details. 1 ST ANDBY/ON button and ST ANDBY lamp (11) 2 SURROUND/DSP OFF b utton (26, 27) 3 DSP button (27) 4 SURROUND b utton (26) 5 Remote sensor (10) 6 Displa y (F or details, see “Display” on the next page .) 7 • INPUT ANALOG button (17) • INPUT A TT button (18) 8 INPUT DIGIT [...]

3 English Display See pages in parentheses f or details. 1 ANALOG indicator (17) 2 DIGIT AL A UT O indicator (17) 3 SPK indicator (13) 4 Speaker indicators and signal indicators (27) 5 PRO LOGIC II indicator (24, 26) 6 DSP indicator (25, 27) 7 H.PHONE indicator (13) 8 RX-6030VBK and RX-6032VSL only: BASS BOOST indicator (18) 9 TUNED indicator (22) [...]

4 English Par ts Identification Rear Panel—RX-5030VBK/RX-5032VSL See pages in parentheses f or details. 1 DIGIT AL IN ter minals (10) • Coaxial: DIGIT AL 1 (D VD) • Optical: DIGIT AL 2 (CD) 2 Audio input/output terminals (6 – 9) • Audio components: CD IN, T APE/CDR • Video components: VCR, TV SOUND IN, D VD IN • SUBWOOFER OUT 3 COMPU [...]

5 English AM LOOP FM 75 COAXIAL AM EXT ANTENNA FM 75 COAXIAL FM 75 CO A XIAL 7 How to connect the AM antenna cor d 1 Open the terminal. 2 Insert the AM antenna cord. 3 Close the terminal. Notes: • If the AM loop antenna wire is covered with vin yl, remov e the vinyl b y twisting it as shown to the right. • Make sure the antenna conductors do no[...]

6 English Getting Star ted 7 Speaker lay out diagram Connecting the Speakers and Subwoofer Y ou can connect five speak ers — a pair of front speakers, a center speaker , and a pair of surround speakers — and a subwoof er . CA UTION: Use speakers with a SPEAKER IMPED ANCE as indicated b y the speaker terminals. 7 Connection diagram 7 How to conn[...]

7 English CD IN OUT (REC) IN (PLA Y) OUT (REC) VCR TV SOUND IN AUDIO RIGHT LEFT IN (PLA Y) T APE /CDR R R L R L L Connecting Audio/V ideo Components T urn the power off to all components bef ore making connections. Y ou can connect the following audio/video components to this receiv er . Ref er also to the manuals supplied with y our components. ?[...]

8 English Å To left/right audio input ı To left/right audio output Ç To composite video output Î To composite video input RX-6030VBK and RX-6032VSL only ‰ To S-video input Ï To S-video output Ì To component video output Getting Star ted Rear panel VCR TV Å To audio output ı To composite video input RX-6030VBK and RX-6032VSL only Ç To S-v[...]

9 English Rear panel DV D RX-6030VBK/RX-6032VSL Å T o surround left/right audio output ı T o center audio output Ç T o subwoofer audio output Î T o front left/right audio output ‰ T o composite video output Ï T o S-video output Ì T o component video output Å T o audio output ı T o composite video output T o use software encoded with Dolby[...]

10 English Digital Connections This receiv er is equipped with two DIGIT AL IN ter minals — one digital coaxial terminal and one digital optical ter minal. Y ou can connect any component to one of the digital terminals using a digital coaxial cable (not supplied) or digital optical cable (not supplied). Digital coaxial cable Digital optical cable[...]

11 English T APE/CDR * : Select the cassette deck (or the CD recorder). FM (front panel): Select an FM broadcast. AM (front panel): Select an AM broadcast. FM/AM * (remote control): Select an FM or AM broadcast. • Each time you press the b utton, the band alternates between FM and AM. RX-5030VBK/RX-5032VSL On the front panel F rom the remote cont[...]

12 English Basic Operations DIGITAL AUTO SPK ONE TOUCH OPERATION BASS BOOST PRO LOGIC DSP H.PHONE AUTO MUTING TUNED STEREO TA NEWS INFO VOLUME INPUT ATT EON RDS SLEEP CH – 12 ANALOG L LINEAR PCM DIGITAL C R S.WFR LFE LS RS S STANDBY STANDBY/ON DIGITAL PRO LOGIC DIGITAL SURROUND SURROUND DSP DVD MULTI FM MODE MEMORY ON/OFF FM/AM TUNING DVD VCR TV [...]

13 English Adjusting the V olume On the front panel T o increase the volume, turn MASTER V OLUME control clockwise . T o decrease the volume, turn MASTER V OLUME control counterclockwise . From the remote control T o increase the volume, press VOLUME + . T o decrease the volume, press VOLUME − . The volume le v el can be adjusted within a range o[...]

14 English Basic adjustment auto memory This receiver memoriz es sound settings for each source when—: • y ou tur n off the power , • y ou change the source, and • you assign the source name . When you change the source , the memorized settings f or the newly selected source are automatically recalled. The f ollowing can be stored f or each[...]

15 English 4 T urn MUL TI JOG dial to adjust the selected item. Select “SUBWOOFER YES” if a subwoof er is connected. Ex.: When “SUBWOOFER YES” is selected. 5 Press EXIT . T o adjust other items, repeat steps 2 to 5 . T o finish the setting, go to step 6 . 6 Press EXIT again. The receiver e xits from the basic setting mode. Setting the Speak[...]

16 English 7 Speaker distance — DIST ANCE UNIT , FRNT DIST ANCE, CNTR DIST ANCE, SURR DIST ANCE Select the unit to measure the distance between y our listening position and speakers—“METER” or “FEET . ” After selecting the measuring unit, select the appropriate speaker distance f or each speak er within the range of “0.3m” (“1FT?[...]

17 English If the f ollowing symptoms occur while pla ying Dolb y Digital or DTS encoded software with “DIGIT AL A UT O” selected, change the digital input mode. • Sound does not come out at the beginning of pla yback. • Noise comes out while searching or skipping chapters or tracks . Press INPUT DIGIT AL on the front panel repeatedly to se[...]

18 English Notes: • This button does not work when the subwoof er is set to “NO” (see page 15). In this case , “NO SUBW OOFER” will appear on the displa y for a while . • Y ou cannot tur n off subwoofer output when the front speak er size is set to “SMALL. ” • When you change the subwoof er setting from “NO” to “YES , ” su[...]

19 English 2 T urn MUL TI JOG dial to select an item y ou want to adjust. * These items ma y not be selected depending on how the follo wing are set: • Subwoofer setting • Speaker size setting • The current Surround/DSP mode F or details, see the ne xt page and “Adjustab le items and selected Surround/DSP mode” on page 27. 3 Press SET . T[...]

20 English 7 P anorama control f or Pro Logic II Music — P ANORAMA CTRL Y ou can tur n on or off the P anorama control f or Pro Logic II Music only when “ PL II MUSIC ” is activated. Select “ P ANORAMA ON ” to enjo y “ wraparound ” sound eff ect with side-wall image ( “ OFF ” is the initial setting). • F or Pro Logic II Music, s[...]

21 English 5 Press TEST again to stop the test tone. Adjusting Subwoofer Output Level Make sure the subw oofer setting is set to “ YES ” (see page 15). 1 Press SOUND . The 10 ke ys are activated f or sound adjustments. 2 Press SUBWFR. 3 Press LEVEL +/ – to adjust the subw oofer output level ( – 10 to +10). When you press the b utton once, t[...]

22 English T uner Operations T uning in to Stations Manually 1 Select the band (FM or AM). RX-6030VBK/RX-6032VSL Press FM or AM on the front panel. The last receiv ed station of the selected band is tuned in. • When using the remote control, press FM/AM. The last received station of the last selected band is tuned in. Each time you press the b ut[...]

23 English 3 Press FM/AM PRESET 5 / ∞ to select a channel number while the c hannel number position is flashing. Ex.: When channel number “ 3 ” is selected. 4 Press MEMOR Y again while the selected channel number is flashing on the displa y . The selected channel number stops flashing. The station is assigned to the selected channel number . [...]

24 English Dolby Digital 5.1 channel encoding method (so-called discrete multi-channel digital audio f ormat) records and digitally compresses the left front channel, right front channel, center channel, left surround channel, right surround channel, and LFE channel signals. Since each channel is completely independent from the other channel signal[...]

25 English DSP modes 7 DAP (Digital Acoustic Processor) modes D AP modes hav e been designed to create impor tant acoustic surround elements. The sound heard in a live club , dance club, hall or pa vilion consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without an[...]

26 English Make sure that you ha ve set the speaker inf ormation correctly (see pages 15 and 16). • If only the front speakers are connected, y ou cannot use Surround/DSP modes. • Y ou cannot use DSP modes if no surround speakers are connected. • Do not change the speaker setting while using an y Surround/DSP modes; otherwise, the Surround/DS[...]

27 English Signal and speaker indicators on the display Signal indicators Speaker indicators The f ollowing signal indicators light up—: L: • When digital input is selected: Lights up when the left channel signal comes in. • When analog input is selected: Alwa ys lights up . R: • When digital input is selected: Lights up when the right chan[...]

28 English From the remote control D VD MUL TI 1 Press D VD MUL TI. Note: When you select “D VD MUL TI” as the source to pla y , Surround/ DSP mode is canceled, and SURROUND and DSP b uttons do not work. 2 Select the analog discrete output mode on the D VD pla yer , and start playing a D VD. • Ref er also to the manual supplied with the D VD [...]

29 English The COMPU LINK remote control system allows y ou to operate JVC’ s audio components through the remote sensor on the receiver . T o use this remote control system, you need to connect JVC’ s audio components through the COMPU LINK-4 (SYNCHRO) jacks (see belo w) in addition to the connections using cables with RCA pin plugs (see page [...]

30 English Notes: • Y ou can connect to the TV with the A V COMPU LINK III or A V COMPU LINK EX terminal. A TV with A V COMPU LINK RECEIVER/AMP ter minal can not be used. • When connecting the receiver and a TV with the A V COMPU LINK EX terminal by using a component video cab le, y ou cannot use the Automatic Selection of TV ’ s Input Mode ([...]

31 English Notes: • When connecting only the VCR or D VD play er to this receiver , connect it directly to the receiv er using cables with the monaural mini-plugs. • Make sure that the remote control code of the VCR connected to the VCR jacks is set to code “ A. ” • Refer also to the man uals supplied with your video components . 7 Connec[...]

32 English Operating JVC’ s Audio/V ideo Components Sound Adjustment Y ou can alwa ys use the follo wing buttons: SURROUND T ur n on and select the Surround modes. DSP T ur n on and select the DSP modes. SURROUND/DSP OFF T ur n off the Surround or DSP modes. After pressing SOUND , you can use the f ollowing b uttons f or the sound adjustment: SUB[...]

33 English AUDIO TV/CA TV VCR DV D TEST MENU ENTER LEVEL RETURN SURROUND /DSP CD – DISC SLEEP REC P A USE FM MODE SURROUND DSP DIMMER TV/VIDEO MUTING OFF VCR CH TV/CA TV CH VOLUME SURR R SURR L SUBWFR CENTER FRONT R FRONT L 100 1 4 7/P 10 2 5 8 0 3 6 9 10 REMOTE CONTROL RM - SRX 6030J REW FF TV VOLUME ST ANDBY/ON TV CA TV T A/NEWS/INFO DISPLA Y M[...]

34 English Operating JVC’ s Audio/V ideo Components AUDIO TV/CA TV VCR DV D TEST MENU ENTER LEVEL RETURN SURROUND /DSP CD – DISC SLEEP REC P A USE FM MODE SURROUND DSP DIMMER TV/VIDEO MUTING OFF VCR CH TV/CA TV CH VOLUME SURR R SURR L SUBWFR CENTER FRONT R FRONT L 100 1 4 7/P 10 2 5 8 0 3 6 9 10 REMOTE CONTROL RM - SRX 6030J REW FF TV VOLUME ST[...]

35 English Operating V ideo Components IMPORT ANT: T o oper ate JVC’ s video components using this remote control: • Y ou need to connect JVC’s video components through the A V COMPU LINK terminals (see page 30) in addition to the connections using cables with RCA pin plugs (see pages 8 and 9). • Some JVC VCRs can accept two types of contro[...]

36 English Operating Other Manufactur ers’ V ideo Equipment By changing the transmission signals , you can use the remote control supplied f or this unit to operate other manuf acturers’ equipment. • Ref er also to the manuals supplied f or the other products. • T o operate these components with the remote control, first you need to set the[...]

37 English T o change the transmission signals for operating a DVD player 1 Press and hold ST ANDBY/ON DV D. 2 Press D VD . 3 Enter manufacturer ’ s codes using b uttons 1 – 9, and 0. 4 Release ST ANDBY/ON DV D. Now , you can use the f ollowing b uttons on the D VD play er . 3 Star t playbac k. 7 Stop pla yback. ¢ Skip to the beginning of the [...]

38 English T r oubleshooting Use this char t to help you solv e daily operational prob lems. If there is any problem y ou cannot solv e, contact y our JVC ser vice center . SOLUTION Plug the power cord into an AC outlet. Check speaker wiring and reconnect if necessary. Select the correct source. Press MUTING on the remote control to cancel the mute[...]

39 English Specifications Designs & specifications are subject to change without notice. RX-6030VBK/RX-6032VSL Amplifier Output P ow er : At Stereo oper ation: F ront channels: 100 W per channel, min. RMS, driven into 8 Ω , 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion. At Surround operation: F ront channels: 100 W per chan[...]

40 English RX-5030VBK/RX-5032VSL Amplifier Output P ower: At Stereo oper ation: F ront channels: 100 W per channel, min. RMS, driven into 8 Ω , 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion. At Surround operation: F ront channels: 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no more than 0.8% total harmonic dist[...]

EN, FR 0103NHMMDWJEIN J V C VICTOR COMP ANY OF JAP AN , L IMITED © 2003 VICTOR COMPANY OF JAPAN, LIMITED Cover_RX-60_5030[C]f 02.12.25, 12:59 2[...]