Kenwood VR-2000 manual

KENwOOD AUDIO - VIDEO RECEIVER VR-2090 VR-2080 KR F-V8881 D KRF-V7771 D INSTRUCTION MANUAL KENWOOD CORPORATION This manual contains instructions for four models. Model availability and features (functions) may differ depending on country and sales area. About the DTS multi-channel audio format i The DTS multi-channel audio format is available on CD[...]

JR-2CgO/VR 2_RC'/KRF-VB_81 D/_: _IF V7771 D (Fn .'K Befo.. r plj . .ingon.ower _ Caution: Rea_ d this section carefully to ensure safe operation. Units are designed for operation as follows U.S.A. and Canada ......................................................... AC 120 V only *Other countries ............................. A C 110-120/2[...]

Contents introductio_n=i J Setup VR 2090/VR-2000/KRFVBB81 D/KRF-V7771 D [En/K) Caution : Read the pages marked ._ carefully to ensure safe operation. ..... . .H....,,. ,., I II II II IIIIIIIII II _._ L'_*_ 3 The description headlines marked with the _ (star) symbols show the shortest way to perform Surround Sound playback, Introduction .......[...]

VR_Q_(_IVR _(_BG/KRF:V_B_'_D/KRF V7771D IF_n/K] DTS DTS (Digital Theater System) is a 5,1 digital audio format that provides five full-spectrum channels and one low-frequency (subwoofer/ channel for unprecedented clarity, optimum channel separation and a twide) dynamic range. In the DTS mode, the 5,1 channel digital input from a DTS CD, LD or [...]

VR-2090iVR-20BOiKRF-V88810/KRF-V? 7710 [En!K] Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These _'"_-- modes enable the remote control to perform display operations and control other audlo/video components. In order to effectively use the remote control it is important [...]

VR-2Q90/VR-2OBC]/KRF-Vee81 D/KRF-V7771 O IEniK] Connection of audio comoonents ................... iH IIIIIIII I IIIIIIIIIIII II I IIIIII Ill IIIIIII I IIIIqllllllll" I I IIIIIIIIrl IIII!1II _ ! The connected components shown here are given as ex- amples because the available models vary depending on marketing areas. Make connections as shown [...]

VR-20£O/VR 2080/KRF-VBBB 1DiKRFW7771D [£niK] Connection of video components IIIIIII II II1'1 II IIII ' IIM IIIII I IIII I I III IIII III The connected components shown here are given as ex- amples because the available models vary depending on marketing areas, Make connections as shown below, When connecting the related system component[...]

VR*20_OiVR-208Q/KR_ V88Bl O/KRF V7 7710 {En/K] Make connections as shown below. The digital in jacks can accept either DTS, Dolby Digital {AC-3) or PCM (CD Format) signals (the input signal type is detected automatically). When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components yo[...]

C Conec the system control .......... :9 Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. There are two KENWOOD system control modes. Make connections according to the groups of terminal symbols shown below. [_] Mode :lets you corrlbine [_. _(_8]. and [...]

V_ 20gQ/VR-2OBO/KRF VB£B 10/K_F-V77710 [FniK] S eaker connections PRE OUTconnections S eak ctions PRE OUT, o., "1 The front speaker impedance is variable depending on the area where the unit is sold, Read the note printed on the rear panel of the unit. O Strip coating. t::::::3d_ O- Loosen. • Never short circuit the %_)_._ and - speaker cor[...]

Make connections as shown below, Do not connect the power cord to a wall outlet until all connections are completed. Antenna terminal connections O Push lever, O Insert cord. O Return lever. VR-2090/VR-2080/KRF-V8881D/KRF-V7 7 71D (Era/K} AM loop antenna FM indoor antenna The supplied loop antenna is for _se ndoors. Place it as far as possible from[...]

The remote control unit provided with this unit can be used to control the components as a system by utilizing a com- mercially available infrared control unit or wired control unit. By installing the IR RECEIVER and speakers in an other room, the system in another room can be remote controlled, To control the desired components from another room, [...]

For VR-2090 VR-20£O/VR-2OBO/KRF-VB881 OiKRF-V77710 JEn/K i B The following connections allow you to connect your main system to a monitor TV and speaker system located in another area - (Room B). The monitor TV can be connected directly to the SECOND ROOM PRE OUT VIDEO jack. To connect the speakers, use either of the connections described below. T[...]

..m , nllllll i i iiiiii K_N_OOO ( F ""; r + jt ' + I ,,,iii i n I, I + 1 + • + +o 0 POWER key (U.S.A+, U,S+Military and Canada) Press to switch power ON and OFF. O POWER key (Except for US+A,, U.S.MilRaq/and Canada) (China : O POWER) Press tO switch the main power ON and OFF+ O ON/STANDBY key (Except for U+S.A. UrS+Military and Ca[...]

VR-2090/VIR-2080/KRF.V88131 DiKRF V7771 O |En/K] Turning the power on for the first time O Check that all of the connections have been made properly. _) Plug the power cord into an AC wall outlet. 0 Push the Power key on the front panel. (Except for U.S.A., U.S. Military and Canada} Q Press the ON/STANDBY key on the front panel. Switching the displ[...]

[...]

VR-20£O/VR-2080! KRF-Ve 8 B 1 O/KRF-V7771 D (En/K) Controls and indicators The Remote Control unit provided with the Receiver can also control KENWOOD MD recorder, cassette decks, CD player, DVD player and LD player which are connected to it through system control cords, For details of the controllable functions, refer to the instruction manuals o[...]

Settin up the RC accordinq to yourreceiver Perform the following procedure after inserting batteries for the first time or when the remote control back-up data has been lost. Preparations • Press the POWER key and ON/STANDBY key of the main unit to t._m it ON, Wth some models sold in certain areas, simply pressing the ON/STANDBY key turns the uni[...]

VR 20£O/VR 2080/KRF-VBB81 O!KRF-V77710 {En/KI The remote control unit is given with a hierarchical structure so that it can display a large number of functions. For instance, the menu screen for use in setup can be accessed from the menu screen as shown below. 0 To dispJay the "Main Menu" Screen containing the "Setup" menu scre[...]

[...]

VR-2OBO/VR 2080/KRF-V88810/KRF V77710 {E_/K) The operations in this section consist of defining the relationship between the input selections displayed on the panel and the _!_ii_; components connected to the rear panel jacks, _i Assigning the connected components to the selected General setupflow [] Opening the "Setup"menu F_ Opening the[...]

VR-2090/VR_20BO/KRF-V88 B 10/KRF.V7• 710 iEn FK If one of your connected components is not listed in the Setup Codes chart, its setup code can be downloaded through a telephone line, Futureset codes are stored in memory, Each time a "Futureset Upgrade" is performed, any previous information in the Futureset memory location is erased. Pl[...]

Code selection after mode download After successful completion of the download, step [] of the previous page, the remote control automaticafly enters a special set-up mode which works as described bePow, D Select the input and component names that you want to assign a setup code. O Select the input name by selecting the "_ "or "_) &q[...]

To control the system components in "Room A" from "Room B", it is first required to set the IR RECEIVER to "Room B". After this, perform the IR RECEIVER setup using the main unit keys as described in "Switching the IR RECEIVER mode", Then, perform the required setups for the remote control unit using its &quo[...]

VR 2O90/VR 2080iKRF-V8881 D/KRF-V77710 _Er_iKI Setup forplaying different CDs fromRoom A andRoqm: B Preparation eConnect the CD player(s) to the man unit, and perform the operatons n "Assigning the connected components to the selected inputs" and "Setup of Room A and Room B" To play CD(s) in Room A and Room B, use one of the thr[...]

VR-2090/VR-2080/KRF-V8881 DiKRF V7721D [ZniK i Setup for playing two CO players from Room A and Room B _ Connect CD players. The connection as described below is required when a KENWOOD CD player and a CD player from other manufacturer are connected or when two non-KENWOOD CD players are connected for listening in "Room A" and "Room [...]

Summary of Input Level Setup If the CLIP INDICATOR on the front panel lights, change the "Input Level" setup. • The "Input Level" Can be set for an,/selected input VR-2OgO!VR-2OSO/KAF V8881 D/KRF-V?771 D (En/K] U Select the icon of the input for which you want to set the input level J • When adjusting "CD1", "[...]

I rj Opening the "Setup" menu screen ! F'J Selection in the "Setup ,menu screen t wi Selecting" $P Selection" [ _ Selecting the speakers [] Setting the "Speaker Distance" _] Setting the "Speaker Level "° Q Setting the "Surround SP Type" D Select the "Main Menu" icon. f Lstn Mode[...]

D Select the on/off conditions or sizes of the speakers. _A. If you want a simplified setup operation, select "Quick Setup" _:_._z-'_rei!,_, ! i L _ _ _ C : Center speaker [ Custorn Setup .] _ S : Surround speakers 0 Set the "Yes" or "No" condition for each of "SW", "C" and • Setect the "[...]

menu The pieces of equipment which are set to "Model 1" and "Model 2" in the "Model Type Setup" can be controlled with "Accessories" or "Home Automation". In addition to the components which can be remote controlled by setup code inputs, the following equipment can be remote controlled. "Access[...]

"Accessories" control VR 2090/VR-2080/KRF-V8881DIKRF-V7771 D [Er_/KJ r_ Perform selection in the "Function"menu. O Select the "Accessories" icon, _'_ Perform selection in the "Accessories"menu. I;,_-_.,=[÷ Ill l 0 Select "1 '° to "8". a 1( z .... ) '-:::!: t, ..... 4 l( 8 ) &qu[...]

.......... components VRI_OBO/VR-2080/KRF V8881D/KRF V7771 D IEn/K] Lutron control D Perform selection in the "Home Automation" menu. O Select the "Lutron °' icon, Perform selection in the "Lutron (Spacer)" menu. Set : Select The following icons can be selected, "Toggle" : Toggle switch "Raise" : T[...]

Makita control D Perform selection in the "Home Automation" menu. IR _1 [11] I I [:][f _Jrrt (11111 _; | | ][|] i | (x-lo) [Lutron) ( Maklta VR 209OiVR.2QSO/KRF V888 _ D/KRF-V77710 IEr,!K) O Select the "Makita" icon, B Perform selection in the "Makita (1)" menu. i_5_'l,'It t;lll I ] Cu .in ! Ir-eTq opo:open C[...]

General setup flow U Selecting the "Main Menu" icon and opening the "Setup" menu 19 Selecting the "Macro" icon [] Selecting the input to be played D Selection in the "Macro Edit: Custom 1" screen [] Setting the target component in the "Edit" menu G Setting the channet, etc. The macro play function a[...]

D Operation in the "Custom # Edit: VCR" screen. _r (_'m__Q _JL_(_ Pwr : Power J@lm ®l P,v P,ay Channel Code JQ_L_! • The output tmingof each code can be switched as shown below "- -" ndicates that nO code is output and "Os" indicates that the code is output at the same time es a macro e×ecute key _s pressed ?[...]

VR 2£J9QiVR 2QSOIKRF V88810/KRF V7771 [3[En/K) Macro Execute r [ General setup flaw By setting up the items in "Setting up the remote control unit for macro play (automatic operation)", you can start L1 Opening the "Macro Execute" menu screen automatic play using the macro function. [] Operation in the "Macro Execute"[...]

VR-2090/VR-2080/KRF-VM81D/KRF-V7771B CORRECTION _P"_ Execute a macro in the "Macro Execute" menu screen, ii!iii ,a- Sr; ti: custom1 ji':iiii i::_i!_ Video Off |::[ Custorn2 lili!i! i;ii;{ Aud o On |_[ Custom3 j_i }%!.2 , w:i,_i:i3 • Select the icon of the component to be controlled. Video On : Turns _he video comoonent's [...]

"LCD FutureSet"remote "Home Automation" ad ti n Control "Home Automation" products Your new remote centre comes with built-in IR commands to control non-audio/v dee equipment such as drapery-opening or lighting-control equipment, Some equipment can even centre virtue ly any eleetr catly-powered equipment in your homo T[...]

/ General operation flow IBI Selecting the icon of the component to be controlled from the fixed segments /_ ' _ _, ,,., _.. m _ • The selected input changes according to the selection 1€] Performing operation in the menu screen of the selected component Remote control of tuner [] Select the "Tuner" icon. • The "Tuner"[...]

Remote control of satellite tuner • It is necessar¥ to assign the satefr te tuner to one of the "Video" inputs p_eviously, [] Select the "Video 1, 2, 3 or 4" icon. • The "Video1/21 3t 4" input is selected, 0 Select the icon to be controlled. oso Menu }_i OSD { Function J l Pad l] Air. Power On-Screen Dis- play Alt[...]

"-General operation flow U Selecting the icon of the component to be controlled from the fixed segments • The selected nput changes according to the selection, FJ Performing operation in the menu screen of the selected component Remote controlling a Multi-room capability CD player or a 200-disc changer CD player By connecting the Multi-room [...]

Single CD remote control • It is necessaw to assign the CD player input previously r_ Select the "CDI" icon. • The "CDI" input is selected [] Select the icon to be controlled. E_]Xtdl .................. __EiI@ _ample o_ men_ _ _(_ screen: _{_3__ When the system setup ......................... code is input [] Perform operati[...]

VR-2L_90/VR 2OeO/KRF-VeeB10iKRF-V7771 D IEn!K) The control in "Room B" is possible when the analog inputs are used. Preparation The following preparatory setups are required to control the audio in "Room B", • Perform the operations described in "Connections for remote control of other components" and "Setup for[...]

VR-2OgOiVR 2OBO/KRF VBB81 DiKRF-V7771 [3 [En/K} Midnight mode i/2/Off (Dolby Digital (AC-3) mode only) When watching movies at night you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified parts of the AC=3 sound track (like scenes with sudden increases in volumel to minimize t[...]

Use the following procedure to play a CD or MD. _,,_t_!_i I Preparation [:!_[_: '_"_ | • Perform the operations in "Connections" L e Perform [he operations in "Setup" chapter. VR-2OBOiVR 20BOiKRF VBB81D/KRF V7771D {EniK) Switching between digital input andanaloginput Except when playing the digital input, select the [...]

VR*_ ogo/vR-2OBO/KRF-V8881E3iKRF V77710 [En/KI Select the speakers If you havenot completed the setup of "Room A '° and "Room B" : - oA O A ON Listening in SPEAKERS A SPEAKERS O B ON Listening in SPEAKERS B - o B l_t A + B ON Listening in both SPEAKERS A and SPEAKERS B Q A + B OFF Muting all speakers ff youhave already complete[...]

VR-2OSO/VR- 2OSO/K RF-VS881 DiKRF+V7771 [3 [En/K) When recording sound with a recorder component of KENWOOD, synchro recording is possible by setting the INPUT SELECTOR to select "Tape1" or "MD" according to the connected component. Recording a music source O Select the recording source. The icons differ according to the setup o[...]

VR-20gO/VR-2060/KRF-V8881D 'KRF-V7771D [EniK) Select the source you want to record, O Set the video deck to record, O Start playback, then start recording, • When recording to a VCR connected to the VIDEOt iacks, select a source otser than Video1 • Yo record a digital source connected tothe VIDE02, 3 or 4jacks, turn the INPUT SELECTOR to s[...]

Radio stations can be classified into RDS (Radio Data Sys- tem} stations and other stations, For listening to RDS sta- tions or storing RDS stations in preset memory, see section entitled "Functions of RDS". -_ General Operation flow I11 Selecting the "Tuner" icon [] Selecting control keys VR-2ogoivR 2080/KRF-V888t DiKRF-V7771D [...]

VR2090/VR208Q/KRF_8881DiKRF_7771D{En/K] RDS is a system which trans_it_s_ul information (di:i_t:l data)fer ;Pv1 bro_dcas_t_g_ther withthe br_adcast s'i_n-al. T_ _ii and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name, F Funct[...]

Use the operating procedure on this page to store RDS stations automatically in preset memory. Up to 40 RDS stations can be preset and received with a simple key operation. This unit is compatible with the RDS so it can use convenient RDS functions including automatic tuning. VR-2ogO/VR-2OBO/KRF-V8881 DiKRF-V77710 [EniK) RDS stations should be stor[...]

The Auto Memory function gives precedence to RDS sta- tions and assigns them from preset number 1. Therefore, when it is required to preset RDS stations as well as non-RDS stations, execute the Auto Memory operation first then proceed to the manual memory operation of non-RDS sta- tions. VR-2OgOiVR-2080/KRF-V88810i KRF V7771 D tEn/K] Order of radio[...]

V_*2090!VR-2QBO/KRF V8881 D/KRF-V77710 (En/K} By specifying the type of program Igenre) you want to listen to, the tuner automatically searches for a station which is currently broadcasting a program of the specified type, I With certain receiving conditions, it may take more than 1 l I minute until the search completes. J Preparation a Preset RDS [...]

I1 Start the search. RDS Di_p. VR-20gO/VR-208O/KRF-V888 lO/KRF-V7771 D [E_/K) O Select the "PTY" icon. Select the icon again while it is displayed in reverse. • No sour;d is t_eard while "PTY" is blinking. • During PTY search, the correspond ng indicator on the main unit blinks. l f a program of the desired type cannot be fo[...]

TP (Traffic Program) serch : Automatically tunes to a station broadcasting traffic information. Pre-paration Perform steps I_ to Ig of "Storing RDS stations automatically in the preset memory (Auto Memory)". This step can be omitted if you have already executed the Auto Memory procedure. VR-2OgO/VR-2OBO/KRF V888 '_ OiK RF-V7771D {En/[...]

Except for U,S,A. and Canada General operation flow [] Selecting the "Tuner" icon F_ Selecting control keys Receivin broadcast station ....... _-._!_._L I_! ............... VR-2OgO/VR-2OBO/KRF VBBB 1 D/KRF-V7771 O (En/K} I'1 r_ Select the "Tuner" icon, • ]he "Tuner" input is selected -] Perform selections, O Sel[...]

El a station b the VR 2OB[3/VR 2OBt_/KRF VBBBq D/KRF.V7771D (EniK] Select the "Tuner" input. O Select the "Tuner" icon. • The last tuned frequency is d splayed Perform selection in the "Tuner" menu screen. 0 Set the receiving band. Each select "Band" icon switches the indication, FM _AM Specify the frequenc[...]

I Preparation • Select the "Tuner" input. ! n Select the "Tuner" icon. [] Perform operation in the "Tuner" menu screen. 0 Select the receiving band. Seiect the "Band" icon. 0 Select a station or frequency, Select the "(_ "or "(_" icon, Select the "Memory/lOkey Pad". [] Perform [...]

VR-2OgO/VR-2QaOiKRFN8881OiKR_V7771D fEn!K_ This receiver incorporates 5 different sound modes to let you enjoy surround sound with a wide variety of program sources. The Dolby Digital (AC-3) and Dolby Pro Logic surround modes let you enjoy theater-like surround effects when you play Dolby Digital (AC-3) and Dolby Surround program sources (like vide[...]

Dolby 3 Stereo Dolby 3 Stereo is avaiJable for systems that do not have surround speakers. When in the Dolby 3 Stereo mode the surround nformatioe is redirected to the front left and right speakers This mode is designed for use with Dolby Surround program sources, but can aJso improve sound field unity for programs that are not Dolby Surround encod[...]

Available VR-20£O/VR 21380/KR#-VB881 DiK[tF_V7771D [_t_/l_ The following table showsthe relationship between the source signal, source component and receiver input, and the play mod than can be selected from the surround menu, Source Signal DTS Dolby Digital (AC-3) Dolby Digital (AC-3) RF PCM / Analog Source Component CD / LD / DVD "1 DVD LD [...]

pund VR-2ogo/vR-2OBO/KRF VB881D/KRF-V77710 [EniK] Select the "Main Menu" icon, i _@ 1_, t_ _ ........ Olfthe"LstnMode"iconisnotdisplayed, select"Lsn"fromthe i ...... menu screen to display the "Lstn Mode" menu screen, _ [ LS=tnj Mode-lSnd[FnclSt el=] g Select the Digital" icon so that "Auto" is[...]

VR 20gOA/R-2080/KRF-VB881 D/KRFN777ffD IE_/KI Playback of digital input/nlavback_ of anaion innut .... , Switch the input setup of the receiver to "Input Digital" or "Input Analog" according to whether the input signal from the source component is digital or analog. [][] To play a digital input Select the "input Digital&quo[...]

VR-20gO/VR-208O/KRF-V8881D/KRF-V?771D [En/K) in DSP mode the played signal is a PCM or analog, it can be played with acoustic field by using the DSP mode. I I Preparation [Play music. Select the "Main Menu" icon. _mmmm_ • f the "Lstn Mode" _cor is not displayed in the "Main Menu" screen, select the "Lsn" ic[...]

VR 2090!VR-208OiKRF-V88B ! DiKRF.V7771D tEn/K) The sound quality and the volumes of the speakers can be adjusted as required, Use the procedure on this page to adjust the audio individually, on a per.source or per-program (movie} basis. The effects of the loudness and tone setups are applied only to the sounds output from the "L" and &quo[...]

VR._OSO/VR-20eO/KRF-VB8810iKRF V77710 [En/K] What appears to be a mulfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can corrected before seeking help from your dealer or service representative. How to reset the microcomputer The microcomputer may malfunction (impossibil[...]

Memory backup function Please note that the following items will be deleted from this unit's memory if the power cord is disconnected from the AC outlet for approximately three days. • ]'he input selection is cleared and the "Tuner" nput is selected. • The volume setting is cleared and the volume is set to "-66 dB"[...]

VR-2090!VR-206_3/KRF VBB81D/KRF-V7771D {En/K} _ Caution : Read this page carefully to ensure safe operation. AUDIO section Rated output power during STEREO operation 100 watts per channel minim um RMS, both channels drive n, at I 6 _;2 from 20 Hz to 20 kHz with no more than 0.03 % total harmon c distort on. FTC j Rated output power during SURROUND [...]

Caution : Read this page carefully to ensure safe operation. AUDIO section Rated output power during STEREO operation I100 minimum both channels driven, at l watts per channel RMS, 6 _;_ from 20 Hz to 20 kHz with no more than 0.03 % total harmonic distortion.(FTC) 1 Rated output power during SURROUND operation FRONT (lkHz, 0.7% T.H,D. at 6 _) .....[...]

........ ............ i,i rlrnlrn TV Setup Codes Codes de configuration pour les televiseurs C6digos de preparacion de televisores Maker Setup Codes Fabricants Codes de canfiguration Fabricunte C6digos de preparaci6n AOC 1034, 1045 AdmiraJ 1i08 Adventura 1061 Aiko 1107 Akai 1045 Alaron ! 194 Ambassador 1192 Ampro 1766 Anam ! ! 95 Anam National !070[...]

VR-_OgO/VR 208OiKRF Vaa_lO/KRF*V77710 !E /K) TV Setup codes (continued) Codes de configuration pour les tel_viseurs (suite) Codigos de preparaci6n de televisores (continuacion) Maker Setup Codes Fabricants Codes de configuration Fabricante Codigos de preparaci6n Scotct 1193 Scott 1034, 1193, 1194 1195, 1251 Sears 1062, 1069, 1071, 1169, 1171, 1174,[...]

VR-2QgG!vR 20aOiKRF_B881DiKrqF-V7771D [E_I/K] VCR Setup codes Codes de configuration pour les magnetoscopes Codigos de preparaci6n de videograbadoras Setup Codes Codes de configuration C6digos de preparaci6n Maker Fabricants Fabricaute Action 4332 Admiral 4063 Adventura 4015 Aiko 4293 Aiwa 40t 5, 4052, 4332, 4421 Akai 4056, 4330 American Hight 4050[...]

Jr mlZm lt VCR Setup codes (Continued) Codes de configuration pour les magn6toscopes (suite) C6digos de preparacion de videograbadoras (continuaci6n) Maker Setup Codes Fabricants Codes de configuration Fabricante C6digos de preparaci6n Sansu 4056, 4082 Sanyo 4061,4062, 4119, 4255 Scott 4058, 4060, 4136, 4199, 4226 Sears 4050, 4052, 4057, 4061, 4062[...]

VR,2090/VR-2080/KRF-Va881 D/KRF-V77710 (En/K] I uL i i i i i i llu i ii i nrnnlll DVD Setup codes Codes de configuration pour les lecteurs de DVD Codigos de preparaci6n de reproductores de videodiscos digitales Maker Setup Codes Maker Setup Codes Fabricants -Fabricants Codes de configuration Fabricante _te Kenwood 4itsubish[ _ner Panason c [ RCA Co[...]

CD Player Setup codes Codes de configuration pour les lecteurs de CD Codigos de preparaci6n de reproductores de discos compactos For Kenwood System control operation Pour la commande d'un ensemble Kenwood Paraa operacion de control del s sterna Kenwood Maker Setup Codes Fabricants Codes de configuration Fabricante Codigos de preparaci6n AJwa 8[...]

VR-20£O/VR-2OBQi KRF-VBBE{1 DiKRF-V7771 D (EniK) Cable Setup codes Codes de configuration pour le cable Codigos de preparacion de televisi6n por cable Maker Setup Codas Fabricants Codes de configuration Fabricante C6digos de preparaei6n ABC 0016, 0180, 0022, 0023, 0026, 0028, 0029, 0032 AI egro 0168 Antronix 0037 Archert 0037, 0168, 0812 Cabletenn[...]

• VR 2OgOiVR-2080/KRF-V88B 1D/KRF-V7771D (Era/K) Setup Codes chart : Note Tableau des codes de configuration : Remarque Gr#fico de c6digos de preparacion : Nota Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions av[...]