-
Page 1
KitchenAid" Kltchen_kld" No-Frost Refrigerator Models KSRS22Q KSPS22Q KSRB22Q KSRS25Q KSHS22Q KSRB25Q KSPB22Q A Note toYou ...................... 2 Impodonl Sofety Instructions ........................... 3 Paris ond Feolures ............... 4 Installing lhe Refdgerotor ..... 5 Using the Refrigerotor ........... 7 Codng for the Re_gerotor[...]
-
Page 2
.,q Note to You Thank you for buying a KitchenAicl ° home appliance. You have purchased a quality, world-class home appliance, Years of engineering experience went Into Its manufacturing. To ensure that you enjoy many years of trouble-flee operation, we developed thisUse and Care Guide. It Is full of valuable information on how to operate and main[...]
-
Page 3
Important Safety Instructions To r_3=_:ce the risk of fire, e'.: :_ical shock, or Injury when ,__=!ng the refrigerator, follow .'-=-_-_=!c procautlons Including the following: • Read all Instructions before using the refrigerator. • Child entrapment and suffocations are not problems of the past. Junked or abandoned refrigerators are s[...]
-
Page 4
Parts and Features This section contains captioned Illustrations of your appliance. Use them to become familiar wilh where all pads and features are located and what 1hey look like. Ught Control panel Ught Utilitybucket I Model and i _aiw serial number n compartment label (on side wall) Automatic Ice bln IIIII Ught s,.,ona Ill freezer shelf Slide-o[...]
-
Page 5
Installing the Refrigerator In This Section Page Cleaning the refrigerator .......................... 5 Plugging In the refrigerator ....................... 5 i I If you want your refrigerator to work properly, you need to Install It properly. This section tells you all you need to know to Install your refrigerator. Page Locatlng the refrigerator p[...]
-
Page 6
Locating the refrigerator properly 1. Allow 1/2 Inch (1.25 cm) on each side of the refrigerator for ease of Installation. 2. The refrigerator back can be flush against the wall. 3. If _ refrigerator Isto be against a wall, you mlght want to leave ex_a space on the hinge side closest to the wall so the door can be opened wider. Leveling the refriger[...]
-
Page 7
Using the Refrigerator In This Section Page Setting the controls ................................... 7 Changlng the control settings .................. 8 Removing the refrlgeratot door blns ....... 8 Adjusting the bin glldes ............................ 9 Removing the can dispensers ................. 9 Adjusting the cantilever refrlgerator shelves [...]
-
Page 8
Changing the control settings To change the temperature settings, follow the steps below: 1. Adjust the Refrigerator Control first. 2, Walt at least 24 hours before making further adjustments. This glves the refrigerator and/or freezer time to reach the set temperature. 3. Adjust the Freezer Control If necessary. To make the refrlgerator or freezer[...]
-
Page 9
Adjusting the bin glides Use the bln glldes to secure odd-shaped Items In the door blns or to separate other Items. To adjust lhe glides: I. Grasp gllde. 2. Move glide along bln. Removing the can dispensers Each dispenser holds 5 beverage cans In a convenient place, leaving more shelf space for larger Items. To remove dlslpenser: I. Uft dlspenser u[...]
-
Page 10
Adjusting the RollerTracT" shelf The RollerTrac shelf has rollers which allow you to roll the shelf out for easier access to foods stored on the rear of the shelf. To roll shelf out: • Carefully pull front of shelf toward you. To roll shelf in: • Push shelf In until it stops. To remove shelf: 1. Tilt shelf up at front. 2. Uft shelf up at b[...]
-
Page 11
Removing the crispers and cover To remove crispers: 1. Roll crisper out to the stop. 2. Lift crisper front and pull out the rest of the way. To replace crispers: I. Posltlon back crisper rollers between front roller of track and track Itself. 2. Push crisper up onto track. 3. Roll crisper back until It stops. To remove glass cover: 1. Remove top cr[...]
-
Page 12
Adjusting the meat locker temperature control The Meat Locker Temperature Control allows you to adjust the meat locker storage temperature. Cold alr flows agalnst the meat locker through an openlng between thefreezer and the refrigerator. SUde_e control up or down to allow more or less cold alr through the openlng. This helps keep the meat locker c[...]
-
Page 13
Removing the freezer shelf To remove the shelf: 1. Uft the fight side of shelf off supports. 2. Slide shelf out of shelf support holes on left side of cabinet. 3. Replace In reverse order. Removing the freezer baskets To remove baskets: 1. Slide basket out to the stop. 2. Oft basket at front to clear the stop. 3. Slide basket out the rest of the wa[...]
-
Page 14
Removing the ice maker storage bin The ice maker storage bin holds up to 8.5 pounds (3.8 kg) of Ice.Remove unused Ice perlodically to reduce the potential for off-taste or odor bulld-up In Ice. IMPORTANT: The first few batches of Ice from the Ice maker may have an off-taste. Thls Is from new plumbing and parts. Throw the first few batches of Ice aw[...]
-
Page 15
Using the cold water and ice dispensers Personal Injury Hazard Tumbling Ice and pressure can break a ffaglle glass. Use a sturdy glass when dispensing ice or water. Failure to do so could result in personal Injury or breakage. The ice dispenser Ice dispenses from the Ice maker storage bin in the freezer. When the dispenser bar is pressed, a trapdoo[...]
-
Page 16
The cold water dispenser Chilled water comes from a 50 oz. (1.5 L) tank behind the crisper drawers. Allow about 24 hours to chill the first tankful of water. When the refrigerator Isfirst hooked up, press the water dispenser bar until you draw and discard 2 to 3 quads (1.9 to 2.9 L) of water. ThIs removes the air In the system and rinses the water [...]
-
Page 17
Dispenser/ice maker operating tips PROBLEM CAUSE SOLUTION Dbpensers won't work * Freezer door open * Close the freezer door. Ice dispenser won't work • Icebln not properly Installed • Wrong IceIn bln • Dispenser not used for extended periods of time, causing Ice cubes to melt together • Make sure Ice bin is pushed In all the way. [...]
-
Page 18
Removing the base grille To remove base grille: 1. Open both doors. 2. Pull base grille forward to release the support tabs from the metal clips. 3. Do not remove Tech Sheet fastened behlnd the base grllle, To replace base grille: 1. Line up base grille support tabs with metal clips. 2. Push base grille firmly to snap Into place. 3. Close the doors[...]
-
Page 19
Changing the light bulbs Electrlcal Shock Hazard Before removing a light bulb, elther unplug the refrigerator or dlsconnect the elecJTlclty leading to the refrigerator at the main power supply. Failure to do so could result In personal Injury or electrical shock. To change refrlgerator llght: I. Disconnect refrigerator from power supply, 2. Reach b[...]
-
Page 20
To change dispenser light: I. Disconnect refrigerator from power supply. 2. Reach through front of dispenser area to bulb. 3. Remove bulb and replace with a heavy- duty tO-watt bulb. 4. Reconnect refrigerator to power supply. IMPORTANT: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same siz[...]
-
Page 21
aring for the Refrigerator In This Section Page Cleanlng the refrlgerator ........................ 21 Vacation and moving care ................... 22 Page Power Interruptions ............................... 23 Your new refrigerator-freezer is designed to give you many years of dependable service. However, there are a few things you are expected to [...]
-
Page 22
PART WHATTO USE HOW TO CLEAN Interlor walls Sponge, soft cloth or paper towel with mild detergent and warm water • Wash, rinse and dry well. Door liners and gaskets Sponge, soft cloth or paper towel with mild detergent and warm water • Wash, rinse and dry well, Do not use cleanlng waxes, concenlTat- qKl detergents, bleaches, or cleaners contain[...]
-
Page 23
Moving Turn off the water supply to the Ice maker least one day before you move. When the last load of Ice drops Into the bin, turn the Ice maker off by raising the signal arm. Empty the Ice bin. Remove all food and pack It In dry ice. Unplug the refrigerator. Clean It thoroughl_ rinse well and dry. Take out all removable parts and tape them togeth[...]
-
Page 24
. ood Storage Guide In This Section Page Storlng fresh food .................................... 24 Page Storing frozen food ................................ 25 This section gives you helpful Information on how to store all types of food and for how long. For more information, see a reliable cookbook or a freezer guide. Storing fresh food Vegetable[...]
-
Page 25
Storage chart for meats* TYPE APPROXIMATE TIME (DAYS) Chicken I to 2 Ground beef I to 2 Variety meats I to 2 Steaks and roasts 3 to 5 Cold cuts 3 to 5 Bacon 5 to 7 Cured meat 7 to 10 *If storing meat. longer than the time given, freezing is recommenaea. IMPORTANT: Use fresh fish and shellfish the same day as purchased. Storing frozen food Prepackag[...]
-
Page 26
If You Need Assistance or Service If you ever have questions or comments about your appliance, you can call our toll-free Consumer Assistance Center telephone number, 1-800-422-1230, 24 hours a day. This section is designed to save you the cost of a service call. Part 1 outlines possible problems, their causes, and actions you can take to solve eac[...]
-
Page 27
PROBLEM The motor seems to run too long CHECK IF WHATTO DO The room is too warm, too much food was put Into refrigerator at one time or the doors have been opened too often. The motor naturally runs longer on hot days or If the room Is too warm, as well as when a large amount of food has been put Into the refrigerator or the doors have been opened [...]
-
Page 28
KitchenAid ° _ eestanding Refrigerator Warranty LENGTH OF KITCHENAID KITCHENAID WARRANTY: WILL PAY FOR: WILL NOT PAY FOR: ONE YEARFULL WARRANTY FROM DATE OF PURCHASE, SECOND THROUGH FIFTH YEARFULL WARRANTY FROM DATE OF PURCHASE. SIXTH THROUGH TENTH YEAR LIMITED WARRANTY FROM DATEOF PURCHASE. Replacement parts and repair labor costs to correct defe[...]