English dropdown-ico

LG Electronics 32LD555H manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68

Go to page of

Similar user manuals

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of LG Electronics 32LD555H, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of LG Electronics 32LD555H one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of LG Electronics 32LD555H. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of LG Electronics 32LD555H should contain:
- informations concerning technical data of LG Electronics 32LD555H
- name of the manufacturer and a year of construction of the LG Electronics 32LD555H item
- rules of operation, control and maintenance of the LG Electronics 32LD555H item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of LG Electronics 32LD555H alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of LG Electronics 32LD555H, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the LG Electronics service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of LG Electronics 32LD555H.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the LG Electronics 32LD555H item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Master TV Setup pages 1 1 – 14 Cloning Information pages 24 – 32 FTG Mode of Operation pages 33 – 44 EXPERIENCED INST ALLER 32LD660H 37LD660H 42LD660H 32LD665H 37LD665H 42LD665H 32L V555H 37L V555H 42L V555H 47L V555H 55L V555H © Copyright 201 1, LG Electronics U.S.A., Inc. P/N: 206-4200 (Rev B) Commercial Mode Setup Guide Note: Selected fea[...]

  • Page 2

    2 206-4200 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P ARTS INSIDE[...]

  • Page 3

    3 206-4200 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer ’ s instructions. 8. Do not install near[...]

  • Page 4

    4 206-4200 IMPORT ANT SAFETY INSTRUCTIONS (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below . An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can com[...]

  • Page 5

    5 206-4200 T able of Contents S a f e t y W a r n i n g s .................................. 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 – 4 T a b l e o f C o n t e n t s ................................. 5 Commercial Mode Overview . . . . . . . . . . . . . . . . . . . . . . 6 – 7 S e t u p C h e c k l i s t ..[...]

  • Page 6

    6 206-4200 Commercial Mode Overview T ypical Installer Menu xxLD6 6xH PTC INST ALLER M ENU 000 INST ALLER S EQ 0 00 UPN 000-0 00-00 0-00 0 ASIC D279 PTC V1.00.0 16 CPU V1.21 .00 Installer Menu T o set up a Master TV for cloning purposes, you will need to know how to enter the commercial controller (PTC) Installer Menu and make changes to the defaul[...]

  • Page 7

    7 206-4200 Commercial Mode Overview (Cont.) Cloning Clo nin g ref ers to t he pro cess of captu rin g a M ast er TV Set up and t ran sferr ing it to a T arget TV (b oth TV s mus t b e in Pas s-thr oug h M ode). Th e M ast er TV’ s cl onabl e s etu p men u o ption s s hou ld be co nfigu red as par t o f the Ma ster TV S etu p. If th ere are fea tu[...]

  • Page 8

    8 206-4200 Pro:Centric TV Interactive Menu Features The interactive Pro:Centric TV enables guests—from the comfort of their hotel rooms—to view and select from a complete listing of hotel services and amenities. The Pro:Centric TV is connected to the hotel's billing computer , and service/amenities charges are billed at the time of order .[...]

  • Page 9

    9 206-4200 Pro:Centric Operation (Cont.) Pro:Centric Setup The Pro:Centric server provides the following functionality: • Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides remote management/administration facilities for downloading splash screens and software/firmware updates as well as facilitie[...]

  • Page 10

    10 206-4200 Installer Remote Control T ypical Key Functions 1 2 3 4 5 6 7 8 9 0 ABC DEF GHI JKL MNO PQRS TUV WXYZ PIP CH- PIP CH+ PI P SW AP PI P IN PU T PIP SAP F LA SH BK REMOVE ALPHA/NUM P A G E M U T E T IM ER MENU RETURN V O L CH POWER GUIDE INPUT CC E N T E R TV DVD VCR STB & @ .:/, R A TI O PORT AL INFO i NUMBER Buttons (0 - 9) & DAS[...]

  • Page 11

    1 1 206-4200 Master TV Setup Thi s sec tio n des cri bes how to set up a Mast er TV for clon ing purp ose s whe n the T V is in Pass- throu gh Mod e. Note: Refer to FTG Mode information on pages 33 to 44 for details on entering FTG Mode and conguring/editing FTG Channel Map and FTG Installer Menu settings. Before Y ou Begin • Disconnect all Au[...]

  • Page 12

    12 206-4200 T ypical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Adjust the settings for these Installer Menu items. Master TV Setup Procedure 1. Set Installer Menu items. This step provides specic instruction only on the Installer Menu items that should be set on a Master TV . Refer to pages [...]

  • Page 13

    13 206-4200 Master TV Setup (Cont.) (Continued from previous page) 3. (Optional) Run Auto T uning. Important: If you intend to use a USB memory device / .tlx file for cloning purposes, DO NOT run Auto T uning. If you T each a .tlx file with an auto-tuned/edited Channel Map to a T arget TV , this will put the T arget TV in FTG Mode via CPU. If you r[...]

  • Page 14

    14 206-4200 6. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: Thi s step is appl icable only if you intend to clone the PTC. 2-5 -4 + MENU Mode enables you to add/e dit channe l icons and custom text label s in the PTC once the Master TV Setup has been transferr ed as descri bed in the previous step. Ent er th e Inst al[...]

  • Page 15

    15 206-4200 Installer Menu T ypical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to t he t able start ing o n th e nex t pag e fo r bri ef de scri ption s of Inst aller Menu ite ms. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. Make sure the TV is ON. 2. Using an[...]

  • Page 16

    16 206-4200 Installer Menu (Cont.) Installer Menu Items 000 through 073 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Sets number of hours of no activity before automatic shutoff. 002 AC ON 0 / 1 0 Set to 1 to enable Auto T urn ON[...]

  • Page 17

    17 206-4200 Installer Menu Items 075 through 122 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 075 REVERT CH 0 / 1 0 If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel. 078 UPN MSB 0 ~ 255 0 User programmable number , most significant byte. 079 UPN MSB-1 0 ~ 255 0 User programmabl[...]

  • Page 18

    18 206-4200 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INST ALLER SEQUENCE Species entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Management function is for saving energy . If set to[...]

  • Page 19

    19 206-4200 Installer Menu (Cont.) 010 - MUTE DISABLE Enables or disables sound mute function. If set to 1, sound cannot be muted. If set to 0, sound can be muted. 01 1 - KEY DEFEA T (Keyboard Defeat) If set to 1, KEY DEFEA T prevents the end user from accessing the on-screen menu(s) from the display panel—MENU, ENTER, and menu navigation keys do[...]

  • Page 20

    20 206-4200 Installer Menu (Cont.) 046 - STRT AUX SRCE (Start Aux Source) Sets the starting Aux source. When turned ON, the TV will tune to starting Aux source if item 004 STRT CHANNEL is set to 0. If item 093 RJP A V AILABLE is set to 0 and item 040 AUTO CAMPORT is set to 0: 1 = Video 1 4 = RGB 255 = Last Aux 2 = Video 2 5 = HDMI 2 3 = HDMI 1 6 = [...]

  • Page 21

    21 206-4200 088 - EN NOISE MUTE (Enable Noise Mute) If set to 1, audio mutes when no signal is present. 090 - KEY LOCK If set to 1, display panel Channel, V olume, and Caption buttons are disabled, Power button remains enabled. If set to 0, Channel, V olume, Caption, and Power buttons are all enabled. 091 - YPrPb2 EN. (HDMI2 Enable) Set to 1 to ena[...]

  • Page 22

    22 206-4200 104 - ST ART MINOR CHANNEL Sets Minor Start Channel number at power up. 0 = NTSC. If not 0, number selected is the digital channel’s Minor Start Channel number . Note: This item is not available in the Installer Menu when item 004 STRT CHANNEL is set to 0, 253, or 255. 106 - ASP RA TIO LOCK (Aspect Ratio Lock) Set to 1 to retain previ[...]

  • Page 23

    23 206-4200 Channel Icons / Custom T ext Labels (2-5-4 + MENU Mode) Changing a Channel’s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-T ime display . 3. Us e t he Up /Do wn arrow ke ys to sel ect the ico n wit h w hic h you wa nt to [...]

  • Page 24

    24 206-4200 Cloning Overview IMPORT ANT CLONING INFORMA TION Starting with these TV models, there are now four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 1 1): • Using a USB memory device / .tlx le • Using a USB memory device / .tll le • Using [...]

  • Page 25

    25 206-4200 USB Cloning Procedures Learning / T eaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Read the IMPORT ANT CLONING INFORMA TION on page 24 before beginning any cloning procedures. In particular , ens ure that th e Mas ter TV Se tup do es no t c ontai n a Ch annel Ma p; ot her wise, T eachi ng will res [...]

  • Page 26

    26 206-4200 USB Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using a USB Memory Device / .tlx File (Cont.) T each Master TV Setup to T arget TV 1. Ensure the T arget TV is in Pass-through Mode, and then use the Installer Remote to enter the T arget TV Installer Menu: Press MENU repeatedly until the on-screen display of the TV s[...]

  • Page 27

    27 206-4200 USB Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using a USB Memory Device / .tll File USB Cloning Notes • Read the IMPORT ANT CLONING INFORMA TION on page 24 before beginning any cloning procedures. • Y ou may edit the lename as part of the Learning procedure; however , a le with edited contents will not [...]

  • Page 28

    28 206-4200 T each T o TV (T LL) xxLD66x H-UA000 01.TLL Return Enter USB Dow nload M enu Upgrade TV Softwa re Upgrade PTC So ftware T each T o TV (TL L) T each T o TV (TL X) Return Enter T each T o TV UPDA TING... Do n ot remo ve the USB fro m t he port ! Do not unplug! ! 50% USB Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup usi[...]

  • Page 29

    29 206-4200 Clone Programmer Cloning Procedures Learning / T eaching a Master TV Setup using a TLL-1 100A Clone Programmer Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. T une/set the TV to an analog channel or Aux input, and then plug one end of the MPI cable into the TV MPI port. 3. T urn ON t[...]

  • Page 30

    30 206-4200 Clone Programmer Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using a TLL-1 100A Clone Programmer (Cont.) (Optional) Set the Clock Set the time on a Master TV’ s cloc k. (If the tim e has alr eady been copied from a TV into the TLL-1 100A clone programmer , you can set the Master TV’ s clock by copying the time [...]

  • Page 31

    31 206-4200 Clone Programmer Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using an L T2002 Clone Programmer Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. T une/set the TV to an analog channel or Aux input, and then plug one end of the MPI cable into the TV MPI port. 3. If t[...]

  • Page 32

    32 206-4200 Clone Programmer Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using an L T2002 Clone Programmer (Cont.) (Continued from previous page) Learning usually takes about 90 seconds. “LEARNING IN PROGRESS” will be displayed on the screen while the L T2002 copies the Master Setup. When the Learning process is complete, [...]

  • Page 33

    33 206-4200 Caution: (FTG Mode via CPU only) If applicable, IP/network settings must be completed in the IP Environment Menu before a TV is congured for FTG Mode (see page 45 for further information—the default network setting is DHCP). If IP/network requirements change after a TV has been congured for FTG Mode, the TV will need to be reset[...]

  • Page 34

    34 206-4200 FTG Mode of Operation Overview (Cont.) PICT URE A UD IO INP UT OPT ION TIM E USB CHA NNEL L OCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV (CPU or EBL) is not in Pass-through Mode . While the TV is in FTG Mode, Installer Menu settings can be accessed as read-only . ABC ASP ECT RA TIO Enter [...]

  • Page 35

    35 206-4200 FTG Mode via CPU Creating an FTG Conguration File using the FTG File Manager This section describes how to create an FTG Conguration (.tlx) le that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Conguration le using the FTG File Manager . Notes: • F[...]

  • Page 36

    36 206-4200 FTG Mode via CPU (Cont.) (Continued from previous page) 4. T o add an FTG Channel Map, click >> under FTG Channel Map to copy the current Mapped RF Channels and Mapped IP Channels to the FTG Configuration List. Note: If you make any change(s) in the FTG Channel Map Configuration Utility to the current data to be included in the FT[...]

  • Page 37

    37 206-4200 1. Plug the USB m emory devic e tha t con tains the FTG Co ngur ation le i nto th e T arget LD6 60H/LD 665H or L V555H TV USB IN port. 2. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Us e t he ar row na vigat ion keys to se lect/ [...]

  • Page 38

    38 206-4200 1. Plug a USB memory device into the USB IN port on the TV . 2. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode). 3. Us e t he ar row na vigat ion keys to se lect/ hig hligh t e ith er th e O pti on menu icon from the TV setup menus or the Lock[...]

  • Page 39

    39 206-4200 FTG Mode via CPU (Cont.) T ypical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto T uning and edit the channel lineup, as necessary . Adjust the settings for these Installer Menu items. 1 17 F ACT D EF AUL T 001 003 BAND /AFC 00X Set Installer Menu Ite[...]

  • Page 40

    40 206-4200 Laptop PC RESET AUDIO IN (RGB/DVI) .......... 2 1 HDMI/DVI IN RJP INTERFA CE RGB IN (PC) ..... ..... ..... LAN2 TV-L INK CFG .......... UPDA TE RESET AUDIO IN (RGB/DVI) 1 HDMI/DVI IN INTERF ACE RGB IN (PC) ..... ..... ..... LAN2 TV-L INK CF G .......... LAN1 RJP Laptop PC FTG Mode via EBL (Local Conguration) LD660H/LD665H Jack Panel [...]

  • Page 41

    41 206-4200 Note: The data referenced in the FTG Conguration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FTG Conguration List, you will need to recopy Channel Map and Installer Menu settings to the FTG Con?[...]

  • Page 42

    42 206-4200 FTG Channel Map Conguration Utility The FTG Cha nne l Ma p Conf igura tio n Uti lit y ena ble s you to build a Chan nel Map with lo gic al ch ann el num ber s. The FTG Cha nne l Map for LD660 H/LD6 65H and L V555H TVs may conta in both RF and IP cha nne ls. Sele ct th e appr opria te tab —RF Chan nel Map or IP Cha nnel Map —as ne[...]

  • Page 43

    43 206-4200 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. Select the appropriate tab?[...]

  • Page 44

    44 206-4200 FTG File Manager Utilities Overview (Cont.) CONFIGURA TION SETTINGS Select tabs for categories of Installer Menu items to set up TV . FTG Installer Menu Conguration Utility Notes: • Pro:Centric and LAN tabs enable you to set up parameters equivalent to the Offset Setup and Pro:Centric Menus described under “IP Environment Setup?[...]

  • Page 45

    45 206-4200 IP Enviro nment Prev . Move Netw ork Set up Of fse t S etu p Pro: Centric IP Enviro nment Prev . Move Netw ork Set up Of fse t S etu p Pro: Centric IP Enviro nment Prev . Move Netw ork Set up Of fse t S etu p Pro: Centric IP Enviro nment Prev . Move Netw ork Set up Of fse t S etu p Pro: Centric IP Enviro nment Prev . Move Netw ork Set u[...]

  • Page 46

    46 206-4200 IP Enviro nment Prev . Move Netw ork Set up Of fse t S etu p Pro: Centric IP Enviro nment Prev . Move Netw ork Set up Of fse t S etu p Pro: Centric IP Enviro nment Prev . Move Netw ork Set up Of fse t S etu p Pro: Centric Mode Medi a T ype Serv er IP Port Number W ake On Lan Data Channe l W ake On RF W ake On T ime Of f ► ► 0 0 0 0 [...]

  • Page 47

    47 206-4200 Remote Jack Pack / TV Connections & Setup COMPONENT IN RS-232C IN (SERVICE ONL Y ) UPDA TE RESET AUDIO IN (RGB/DVI) ..... .... R L P B Y P R 1 HDMI/DVI IN OPTICA L DIGIT AL INTERF ACE VI DE O L/MO NO -A UD IO- R A V IN 1 RGB IN (PC) ..... ..... ..... LAN2 TV- LIN K C FG GAME CONTROL /MPI .......... AUDIO OUT SERVIC E ONL Y SPEAK ER [...]

  • Page 48

    48 206-4200 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin , not e tha t the soft ware u pgrad e le s mus t be store d in a folde r name d “LG _DTV” in t he ro ot di rector y of the U SB me mory devic e. Also, ensur e the USB devic e has been forma tted with F A T forma t. Not e f or[...]

  • Page 49

    49 206-4200 Re fere nce : Do wnl oadi ng a Sp las h Sc ree n us ing a U SB Memo ry Devi ce Splash Screen Image File Guidelines • The splash screen image must be a 24-bit (RGB 8 x 8 x 8) BMP . • The image should be no larger than 3 MB. • The ideal resolution for the image is 1366 x 768 pixels or under . • The image le must be stored in a [...]

  • Page 50

    50 206-4200 Reference: Power Consumption Settings 32/37/42LD660H & 32/37/42LD665H The following tables assume that Installer Menu item 1 18 POWER SA VINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 202). Note: V alues are results of controlled experiments under laboratory conditions. [...]

  • Page 51

    51 206-4200 Reference: Power Consumption Settings (Cont.) 32/37/42/47/55L V555H Item 099 Back Lighting (Static) 32L V555H 37L V555H 42L V555H 47L V555H 55L V555H Power Consumption (W atts) Percent Savings Power Consumption (W atts) Percent Savings Power Consumption (W atts) Percent Savings Power Consumption (W atts) Percent Savings Power Consumptio[...]

  • Page 52

    52 206-4200 Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPOR T EN is set to 1 AND 2. In sta ller Men u ite m 040 AUTO CAM POR T is en abl ed (1 ). Selectable : Can be accessed with INPUT key , direct access, etc. Auto Sense : TV switches to this input when connector is ins[...]

  • Page 53

    53 206-4200 Reference: TV Aux Input Configuration DIRECT ACCESS T uning TV ENABLE MPI DA T A ST ART AUX SOURCE ASSIGN- MENT Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W) DA T A ST A TUS TYPE 0xD2 CURRENT A V SOURCE (R) DA T A ST A TUS TYPE 0x 0D AUX SOUR CE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Input Source Mode Number Labeling [...]

  • Page 54

    54 206-4200 A b -LAN enabled head end devi ce, such as an LG FMA-LG10 1, broadcas ts over the RF distr ibuti on system to commun icate to multi ple TVs . When the TV is first installed, it must be turne d ON in order for its embedded b -LAN modul e to rece ive communi catio n from the head end devi ce. At this point, if it is desired for the b -LAN[...]

  • Page 55

    55 206-4200 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M RJP-201M RJP-101ML N/A RJP-1 10F RJP-210F RJP-1 10FW RJP-210FW RJP-1 10W RJP-210W RJP-1 10WBR RJP-210WBR RJP-1 10S RJP-210S RJP-120G RJP-220G RJP-120T RJP-220T RJP-201B RJP-301B RJP-202B RJP-302B RJP Input Auto-sensing Hierarch[...]

  • Page 56

    56 206-4200 This section describes how to reset factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV to Pass- through Mode. Installer Menu Item 1 17 F ACT DEF AUL T If [...]

  • Page 57

    57 206-4200 Reference: TV Zone Restrictions OPTION Enter Move Menu La nguage : Engli sh Audio L anguage : English Caption : Of f Set ID : 1 Demo Mo de : Off Zone : 0 Close 1 ► ► The FT G Cha nne l Map Ed ito r in the FTG Fil e Man age r’s F TG Ch ann el Ma p C on gu rat ion U til ity e nab les you to assi gn Zone res tri ction s t o cha nn[...]

  • Page 58

    58 206-4200 COMPONENT IN RS-232C IN (SERVICE ONL Y ) UPDA TE RESET AUDIO IN (RGB/DVI) ..... .... R L P B Y P R .......... 2 1 HDMI/DVI IN OPTIC AL DIGIT AL RJP INTERF ACE VI DEO L /MO NO - AU DI O- R A V IN 1 RGB IN (PC) ..... ..... ..... LAN2 TV- LINK C FG GAME CONTROL/MPI .......... AUDIO OUT SERVI CE ONL Y SPEA KER OUT 8 LAN1 Reference: LD660H/L[...]

  • Page 59

    59 206-4200 COMPONENT IN RS-232C IN (SERVICE ONL Y ) UPDA TE RESET AUDIO IN (RGB/DVI) ..... .... R L P B Y P R 1 HDMI/DVI IN OPTI CAL DIGI T AL INTERF ACE VI DE O L/ MO NO -A UD IO- R A V IN 1 RGB IN (PC) ..... ..... ..... LAN2 TV- LINK CFG GAME CONTROL /MPI .......... AUDIO OUT SERV ICE ONL Y SPEA KER OUT (8 ) LAN1 RJP ANTE NNA IN Reference: L V55[...]

  • Page 60

    60 206-4200 Reference: Side Connections Panel A V IN 2 L/MONO -AUDIO- R VIDEO USB IN USB IN A V IN 2 VIDEO / AUDIO .......... HDMI/DVI IN 2 USB IN Insert USB memo ry device for software updates, cloning purpos es, FTG Mode via CPU config uratio n, picture/ music entert ainmen t, etc., as applicable . VIDEO IN Connect to video output port on externa[...]

  • Page 61

    61 206-4200 Antenna or CA T V ANTENNA IN LD660H/LD665H TVs only ANTENNA IN Connect to Antenna/ CA TV . Note: The Antenna connection for L V555H TVs is located on the rear jack panel (see page 59). Reference: RF Antenna Connection[...]

  • Page 62

    62 206-4200 T roubleshooting General T roubleshooting Some Quick and Easy T ips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number . (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended setting). If Installer Menu item 028 CH. OVERID[...]

  • Page 63

    63 206-4200 Controller Quick Check ST A TUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Y es No No Y es Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV . POWER LED lit? No Y es Press POWER on LG Installer Remote. TV responded? No Y es TV responded? No [...]

  • Page 64

    64 206-4200 T roubleshooting (Cont.) Commercial Mode Check / FTG Operation T roubleshooting TV turned ON? Y es No Press POWER on Installer Remote. TV is not in Commercial Mode. Call T echnical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Y es Press MENU repeatedly as if to access the Installer Menu.[...]

  • Page 65

    65 206-4200 T roubleshooting (Cont.) Clone Programmer T roubleshooting Cauti on: Do not conne ct a clon e pro gramm er to a PPV c ard in stall ed in the Maste r or T arget T Vs. Also, if the TV is i n Lod geNet PPV Mode (check with the site admin istra tor if you are not c ertai n), d o not connec t a c lone progr ammer to the GA ME CO NTROL /MPI p[...]

  • Page 66

    66 206-4200 Glossary of T erms 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider . The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV . 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300 ohm antenna to a 75 ohm RF j[...]

  • Page 67

    67 206-4200 Document Revision History / Notes Notes Document Revision History Date Description October 201 1 Revision A: New document November 201 1 Revision B: Updates for external MPI control Product documentation is available online at: www.LGsolutions.com/products . From the Products page, select TVs, Systems & Solutions , then LCD TVs , th[...]

  • Page 68

    206-4200 Revision B © Copyright 201 1, LG Electronics U.S.A., Inc. For Customer Support/Service, please call: 1-888-865-3026 www .LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a trademark of LG Electronics U.S.A., Inc. b -LAN is a trademark of LodgeNet Interactive Corporation. All other trademarks or[...]