Marantz SR5006SG manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Marantz SR5006SG, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Marantz SR5006SG one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Marantz SR5006SG. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Marantz SR5006SG should contain:
- informations concerning technical data of Marantz SR5006SG
- name of the manufacturer and a year of construction of the Marantz SR5006SG item
- rules of operation, control and maintenance of the Marantz SR5006SG item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Marantz SR5006SG alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Marantz SR5006SG, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Marantz service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Marantz SR5006SG.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Marantz SR5006SG item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Owner’ s Man ual A V Sur r ound Receiv er SR50 06 Basic version Adv anced v ersion Infor mation[...]

  • Page 2

    I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence [...]

  • Page 3

    II n CA UTIONS ON INS T ALLA TION z z z Wall z z For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. • More than 0.3 m is recommended. • Do not place any other equipment on this unit. n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersio[...]

  • Page 4

    1 Thank you for purchasing this marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ·······················································[...]

  • Page 5

    2 Features Fully discrete, identical quality and power for all 7 channels (100 W x 7ch, 8 Ω) The unit is equipped with a power amplifier that reproduces highfidelity sound in surround mode with equal quality and power for all channels, true to the original sound. The power amplifier circuit adopts a discrete-circuit configuration that achieves[...]

  • Page 6

    3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the[...]

  • Page 7

    Basic version 4 F Connections v page5 F Settings v page19 F Playback (Basic operation) v page26 F Selecting a listening mode (Surround mode) v page51 Connection v page8 , 10 Connection v page8 , 11 Playback – Playback v page28 Connection v page8 , 12 Connection v page15 Playback v page28 Playback v page28 Connecti[...]

  • Page 8

    5 Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the devices to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select the cables (sold separately) accor[...]

  • Page 9

    6 Important information Examples of screen display • Menu screen • Status display screen When the input source is switched. When the volume is adjusted. Audio Adjust Information Setup Wizard System Setup Input Setup Surr.Parameter Tone AudysseySettings Manual EQ M-DAX Audio Delay Menu SOURCE :BD MODE :STEREO [Auto] Master Volume -55.5dB S[...]

  • Page 10

    7 Connecting an HDMI-compatible device You can connect up to seven HDMI-compatible devices (6-inputs/1-output) to the unit. HDMI function This unit supports the following HDMI functions: • 3D • Deep Color ( v page131 ) • Auto Lip Sync ( v page95 , 131 ) • “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe YCC601 color [...]

  • Page 11

    8 Connecting an HDMI-compatible device • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. • Video signals are not output if the inp[...]

  • Page 12

    9 Connecting an HDMI-compatible device Connecting to a device equipped with a DVI-D connector When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D connector. NOTE • No sound is output when connected to a device equipped with a DVI[...]

  • Page 13

    10 Cables used for connections Video cable (sold separately) Video cable Component video cable Y P B P R Y P B P R Audio cable (sold separately) Optical cable IN VIDEO AUDIO OPTICAL OUT VIDEO COMPONENT VIDEO Y P B P R OUT TV Set this to change the digital input connector or component video input connector to which the input source is assigned. “I[...]

  • Page 14

    11 Connecting a Blu-ray Disc player • You can enjoy video and audio from a Blu-ray Disc. • Select the connector to use and connect the device. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). Cables used for connections Video cable (sold separately) Video cable Component video cab[...]

  • Page 15

    12 Connecting a set-top box (Satellite tuner/cable TV) • You can watch satellite or cable TV. • Select the connector to use and connect the device. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). Cables used for connections Video cable (sold separately) Video cable Audio cable (s[...]

  • Page 16

    13 Connecting a video cassette recorder • You can record video onto a video cassette tape. • Select the connector to use and connect the device. • When recording analog audio, use the analog connection. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). Cables used for connecti[...]

  • Page 17

    14 Connecting an iPod or USB memory device to the USB port You can enjoy music stored on an iPod or USB memory device. Cables used for connections To connect an iPod to this unit, use the USB cable supplied with the iPod. USB memory device iPod or marantz does not guarantee that all USB memory devices will operate or receive power. When using a por[...]

  • Page 18

    15 Connecting an antenna • Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 33 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. w e q FM ou[...]

  • Page 19

    16 Connecting a wireless receiver (RX101) By connecting a wireless receiver RX101 (sold separately) to this unit, you can receive and playback audio signals from other devices using the Bluetooth Communication Function. • Use a Bluetooth device that is A2DP compatible ( v page131 “A2DP”). • You can also use wireless receiver RX101 [...]

  • Page 20

    17 Connecting a external power amplifier • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp to each of the channels provides an even greater sound presence. • Select the terminal to use and connect the device. Cables used for connections Audio cable (sold sep[...]

  • Page 21

    18 Connecting to a home network (LAN) • This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio. You can also operate this unit from a computer using the Web control function. • You can update by downloading the latest firmware from the marantz website. For [...]

  • Page 22

    19 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Auto Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more posi[...]

  • Page 23

    20 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct mode Make the following settings: • Vo[...]

  • Page 24

    21 STEP 1 Preparation STEP 2 Detect & Measure (Main) Set up speakers (Audyssey ® Auto Setup) 4 Connect the setup microphone to the SETUP MIC jack of this unit. MultEQ XT Preparation Connect the speakers and place then according to the recommendations in the manual. Next Audyssey Auto Setup [RETURN] [ENTER] Enter Cancel When the setup microphon[...]

  • Page 25

    22 STEP 4 Calculate Set up speakers (Audyssey ® Auto Setup) • In STEP 3, you will perform measurements at multiple positions (two to eight positions) other than the main listening position. • Just one position can be measured but measuring multiple positions increases the accuracy of the correction of acoustic distortion within the liste[...]

  • Page 26

    23 Set up speakers (Audyssey ® Auto Setup) 15 Select “Store” and then press ENTER . Save the measurement results. Audyssey Auto Setup MultEQ XT Store Now storing Please wait 0% Audyssey Auto Setup MultEQ XT Store Press “Store” to store calculation result. Store [RETURN] [ENTER] Enter Cancel • Saving the results requires about 10 secon[...]

  • Page 27

    24 Error messages NOTE • An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey ® Auto Setup over again. • If the result still differs from the actual[...]

  • Page 28

    25 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Auto Setup. 1 Use ui to select “Parameter Check” and then press ENTER . Sp. Config. Check Distance Check Ch. Level Check Crossover Check EQ Check Restore Parameter Check Auto Setup Parameter Check Auto Setup Sp. Config. [...]

  • Page 29

    26 Playback (Basic operation) n Playing a Blu-ray Disc player/DVD player ( v page28 ) n Playing a CD player ( v page28 ) n Playing an iPod ( v page29 ) n Playing a USB memory device ( v page31 ) n Tuning in radio stations ( v page33 ) n Playing a network audio ( v page37 ) Selecting a listening mode (Surround mode) ( v page51 )[...]

  • Page 30

    27 n Using the “Source Select” menu Player BD DVD CD M-XPort USB/iPod Video SAT TV VCR GAME AUX Tuner TUNER Network Favorites Internet Radio Media Server Flickr Last.fm Napster [ENTER] Enter [ ] Mov e Source Select The currently selected input source is highlighted. q Press 3 . Display the “Source Select” menu. w Use uio p to select the inp[...]

  • Page 31

    28 Playing a Blu-ray Disc player/DVD player The following describes the procedure for playing Blu-ray Disc player/ DVD player. 1 Prepare for playback. q Turn on the power of the TV, subwoofer and player. w Change the TV input to the input of this unit. e Load the disc in the player. 2 Press ON to turn on power to the unit. 3 Press BD or DVD twice t[...]

  • Page 32

    29 Playing an iPod You can play back both video, photo and audio. 1 Connect the iPod to the USB port ( v page 14 “Connecting an iPod or USB memory device to the USB port”). 2 Press ON to turn on power to the unit. 3 Press NET/USB twice to switch the input source to “NET/USB”. Favorites Internet Radio Flickr Napster Media Server iPod [1/7] C[...]

  • Page 33

    30 n iPod operation Operation buttons Function AMP MENU Amp menu SEARCH/INFO (Press and release) Page search z 1 / Character sort z 2 SEARCH/INFO (Press and hold) Remote / Direct mode switching uio p Cursor operation / Auto search (cue, ui ) / Manual search (Press and hold, ui ) ENTER (Press and release) Enter / Pause ENTER (Press and hold) Stop RE[...]

  • Page 34

    31 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information n USB memory devices A USB memory device can be connected to the USB port of this unit to play music and still picture (JPEG) files stored on the USB memory device. Also, files stored on an iPod can be played whe[...]

  • Page 35

    32 Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port ( v page 14 “Connecting an iPod or USB memory device to the USB port”). 2 Press NET/USB twice to switch the input source to “NET/USB”. Favorites Internet Radio Flickr Napster Media Server USB [1/7] CH+ / - Preset Last.fm 3 Use ui to select “USB?[...]

  • Page 36

    33 Tuning in radio stations Listening to FM/AM broadcasts 1 Press TUNER twice to switch the input source to “TUNER”. 2 Press BAND to select “FM” or “AM”. FM When listening to an FM broadcast. AM When listening to an AM broadcast. TUNER Band Memory Mode A1 FM 87.50MHz Now Playing AUTO Preset Tuning Search [ MEMORY ] [ T.MODE ] [BAND] [ P[...]

  • Page 37

    34 Tuning in radio stations n Listening to preset stations 1 Press SHIFT/TOP MENU to select the memory block (A to G). TUNER AUTO Band Memory Mode Search Preset Tuning [ MEMORY ] [ T.MODE ] [ SEARCH ] [BAND] [ PRESET+/- ] [ TUNING+/- ] Preset Channel A8 FM 90.10MHz A7 FM 90.10MHz A6 FM 90.10MHz A5 FM 90.10MHz A4 FM 108.00MHz A3 FM 98.10MHz A2 FM 89[...]

  • Page 38

    35 Tuning in radio stations PTY (Program Type) PTY identifies the type of RDS program. The program types and their displays are as follows: NEWS News WEATHER Weather AFFAIRS Current Affairs FINANCE Finance INFO Information CHILDREN Children’s program SPORT Sports EDUCATE Education SOCIAL Social Affairs DRAMA Drama RELIGION Religion CULTURE Cultu[...]

  • Page 39

    36 Tuning in radio stations RT (Radio Text) RT allows RDS stations to send text messages that appear on the display. “RT” appears on the display when radio text data is received. 1 Press TUNER twice to switch the input source to “TUNER”. 2 Press SEARCH/INFO to select “RT”. TUNER [ MEMORY ] Band Memory [ T.MODE ] Mode [BAND] [ PRESET+/- [...]

  • Page 40

    37 Playing a network audio Follow this procedure to play Internet radio stations or music or still picture (JPEG) files stored on a computer . Important information n About the internet radio function • Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. •?[...]

  • Page 41

    38 Playing a network audio G Compatible formats H Internet radio Media server z 1 WMA (Windows Media Audio) P P MP3 (MPEG-1 Audio Layer-3) P P WAV P MPEG-4 AAC P z 2 FLAC (Free Lossless Audio Codec) P JPEG P A server or server software compatible with distribution in the corresponding formats is required to play music files via a network. z 1 Medi[...]

  • Page 42

    39 Playing a network audio Listening to internet radio 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page18 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connect.” ( v page97 ). 2 Press NET/USB twice to switch the input source to “NET/USB”. 3 Pr[...]

  • Page 43

    40 Playing a network audio n Searching stations by keyword (Alphabetic strings) 1 Press ui to select “Search by Keyword”, then press ENTER or p . Station a n 0 _ b o 1 / c P 2 : d q 3 ˜ e r 4 ? f s 5 [ g t 6 h u 7 ] i v 8 ˆ j w 9 ` k x . { l y @ | m z - } Search by Keyword a/A SPACE INSERT DELETE OK RETURN Input Select Cancel SEARCH CursorM[...]

  • Page 44

    41 Playing a network audio Listening to an Internet radio station registered to a preset channel button Press one of the registered P1 – P3 . n Registering internet radio stations as your favorites Favorites are listed at the top of the menu screen, so when a station is registered as a favorite it can be tuned in easily. 1 Press MEMORY while the [...]

  • Page 45

    42 Playing a network audio n Internet radio operation Operation buttons Function V Last played internet radio station P1 – P3 Preset channel (1 – 3) selection AMP MENU Amp menu SHIFT/TOP MENU Preset channel block selection SEARCH/INFO Page search z 1 / Character sort z 2 uio p Cursor operation ENTER (Press and release) Enter ENTER (Press and ho[...]

  • Page 46

    43 Playing a network audio Playing files stored on a computer Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page18 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connect.” ( v page9[...]

  • Page 47

    44 Playing a network audio n Media server operation Operation buttons Function V Last played internet radio station P1 – P3 Preset channel (1 – 3) selection AMP MENU Amp menu SHIFT/TOP MENU Preset channel block selection SEARCH/INFO Page search z 1 / Character sort z 2 uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) En[...]

  • Page 48

    45 Playing a network audio Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page18 “Connecting to a home network (L[...]

  • Page 49

    46 n Flickr operation Operation buttons Function V Last played internet radio station P1 – P3 Preset channel (1 – 3) selection AMP MENU Amp menu SHIFT/TOP MENU Preset channel block selection SEARCH/INFO Page Search z uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Press and hold) Stop RETURN Return 2 Stop [...]

  • Page 50

    47 Playing a network audio How to listen to Last.fm on this unit Last.fm radio is not available in all countries. Please check www.last. fm/hardware for more information. You’ll also need a subscription. Get one today at www.last.fm/subscribe. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page18 [...]

  • Page 51

    48 9 Menu items on playback screen. Love this track Loving tracks improves your Last.fm recommendations, and you can optionally share them on popular social networks. Ban this track If you ban a track, we won’t play it again. You can undo this on the Last.fm website. Scrobbling Scrobbling sends the tracks you played to your Last.fm account. You c[...]

  • Page 52

    49 Playing a network audio Listening to Napster 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page18 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connect.” ( v page97 ). 2 Press 3 to display the “Source Select” menu, then select “Napster” ([...]

  • Page 53

    50 Playing a network audio n Napster operation Operation buttons Function V Last played internet radio station P1 – P3 Preset channel (1 – 3) selection AMP MENU Amp menu SHIFT/TOP MENU Preset channel block selection SEARCH/INFO Search menu / Page search z uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Pre[...]

  • Page 54

    51 Selecting a listening mode (Surround mode) This unit can play input audio signals in multi-channel surround mode or in stereo mode. Select a listening mode suitable for the playback contents (movie, music, etc.) or according to your liking. Selecting a listening mode 1 Play the selected device ( v page 28 – 31 ). 2 Press AMP to set the remote [...]

  • Page 55

    52 Selecting a listening mode Operation button Input signal Listening mode DTS DTS SURROUND DTS ES DSCRT 6.1 DTS ES MTRX 6.1 DTS 96/24 DTS + NEO:6 DTS + PL g x Movie DTS + PL g x Music DTS + PL g z DTS-HD / DTS Express DTS-HD HI RES DTS-HD MSTR DTS Express DTS-HD + NEO:6 DTS-HD + PL g x Movie DTS-HD + PL g x Music DTS-HD + PL g z PCM multi- channel[...]

  • Page 56

    53 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back channel. By adding the surround back channel, a str[...]

  • Page 57

    54 Selecting a listening mode marantz original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. The same sound as that from the front speakers (L/R) is played back at the same level from the surround speakers (L/R) and surround back speakers (L/R). VIRTUAL This mode is for enjo[...]

  • Page 58

    Advanced version 55 F Speaker installation/connection (Advanced) v page56 F Connections (Advanced connection) v page66 F Playback (Advanced operation) v page67 F Playback in ZONE2 (Separate room) v page78 F How to make detailed settings v page80 F Other settings v page111 F Operating the connected devices by remote control unit v [...]

  • Page 59

    56 This section provides the installation, connection, and setup methods of speaker systems other than the 7.1-channel system with surround back speakers. For the speaker installation, connection, and setup methods of the 7.1-channel system with surround back speakers, see C page 4 “Setup Wizard” . Use Audyssey ® Auto Setup function of this un[...]

  • Page 60

    57 Install When 6.1ch (Surround back speaker) installed FL FR C SB SL SR SW z 1 z 2 Listening position z 1 22˚ – 30˚ z 2 90˚ – 110˚ G Speaker abbreviations H FL Front speaker (L) SL Surround speaker (L) FR Front speaker (R) SR Surround speaker (R) C Center speaker SB Surround back speaker SW Subwoofer When 5.1ch installed FL FR SW C SL SR z[...]

  • Page 61

    58 Connect • For the method of connecting 7.1-channel system with surround back speakers, see C page 6 “Connecting the speakers” . • For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)” . 7.1-channel (Front height speaker) connection The illustration on the r[...]

  • Page 62

    59 Connect 6.1-channel (Surround back speaker) connection If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the SURR. BACK/AMP ASSIGN terminal. For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” ( v page57 ). To perform 6.1-channel playback using the sur[...]

  • Page 63

    60 Connect 5.1-channel connection To perform 5.1-channel playback, set “Amp Assign” to “NORMAL” in steps 4 and 5 for “Set up “Amp Assign”” ( v page64 ). Also use the “Speaker Config.” setting ( v page92 ) to set “S.Back” to “None”. NOTE • For speaker cable connections, see C page 6 “Connecting the speakers?[...]

  • Page 64

    61 FL(A) FL(B) FR(B) FR(A) SW Front A/B connection You can connect a second set of speakers to this unit and use them for playback. In this case, perform the settings using the SPEAKER A/B ( v page 27 “Set the front speakers to be used”). For surround playback of a multichannel source, if you connect the center speaker, surround speakers and[...]

  • Page 65

    62 Connect 2.1-channel connection FL FR SW NOTE • For speaker cable connections, see C page 6 “Connecting the speakers” . • For speaker impedance , see page58 . n For connecting two subwoofers Two subwoofers can be connected to this unit. The same signal is output from each subwoofer terminal. Basic version Adv anced v ersion Infor[...]

  • Page 66

    63 Connect Bi-Amp connection You can use the front speakers via the bi-amp connection. A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals of speakers compatible with the bi-amp function. This prevents the back electromotive force (returned force without output) of the woofer sent to the tweeter, whi[...]

  • Page 67

    64 1 Set up the remote control unit n Set up the operation mode Press AMP to set the remote control unit to AMP- operation mode. Press AMP 2 Connect the setup microphone. MultEQ XT Preparation Connect the speakers and place then according to the recommendations in the manual. Next Audyssey Auto Setup [RETURN] [ENTER] Enter Cancel When the setup mic[...]

  • Page 68

    65 Set up speakers 7 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . Surround Back Subwoofer Measure(2sp) Measure Channel Select [RETURN] Return MultEQ XT Preparation Set the following items if necessary. Amp Assign Channel Select Audyssey Auto Setup Auto Setup Start [RETURN] [ENTER] Enter Cancel 8 Use ui t[...]

  • Page 69

    66 Connections (Advanced connection) Connecting the remote control connectors EXTERNAL INTERNAL EXTERNAL INTERNAL EXTERNAL INTERNAL REMOTE CONTROL OUT IN REMOTE CONTROL OUT IN REMOTE CONTROL OUT IN RC OUT w q IR receiver CD recorder DVD player CD player q You can control other marantz products through this unit with the remote control unit by conne[...]

  • Page 70

    67 n HDMI control function ( v page67 ) n Sleep timer function ( v page68 ) n Adjusting the volume of the speakers ( v page69 ) n AirPlay ( v page70 ) n Party mode function ( v page71 ) n Zone Management function ( v page72 ) n Operating a media controller to play music and still pictures ( v page73 ) n Web control function ( v[...]

  • Page 71

    68 Convenient functions NOTE • When “HDMI Control” is set to “ON”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some functions may not operate depending on[...]

  • Page 72

    69 Convenient functions Adjusting the volume of the speakers You can adjust the channel level either according to the playback sources or to suit your taste, as described below. n Adjusting the volume of the different speakers 1 Press AMP to set the remote control unit to AMP-operation mode. 2 Press CH LVL . Channel Level ON Front L Front R Subwoof[...]

  • Page 73

    70 Convenient functions AirPlay Enjoy music from your iTunes library with marantz quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Setting procedure 1 Install iTunes 10, or later, on a Mac or Windows PC t[...]

  • Page 74

    71 Party mode function The same network audio (Internet radio, Media server or iPod DIRECT) can be played on multiple marantz products equipped with the Party Mode function and connected in a network. The party mode consists of one organizer and up to four attendees. When one unit starts the party mode as the organizer, up to four devices on which [...]

  • Page 75

    72 Zone Management function The status of devices connected to the same network can be displayed. Additionally, network menu browsers and volume controls can be performed via the network for the connected devices. This is useful when playing back network services of a device located in a separate room. Only devices compatible with the Zone Manageme[...]

  • Page 76

    73 Operating a media controller to play music and still pictures • Perform this procedure using a media controller conforming to the DLNA (Digital Living Network Alliance) standard. • This function allows you to play content located on a computer (media server) or connected on a network by operating a media controller on the same network.[...]

  • Page 77

    74 Web control function You can operate this unit using a browser. 1 Switch the “Network Standby” setting to “ON” ( v page 99 ). 2 Check the IP address of this unit with “Network Info.” ( v page 100 ). Network Info. Friendly Name DHCP IP Address MAC Address marantz:[SR5006] ON 192.168.100.19 000678-XXXXXX [RETURN] Return Checking the IP[...]

  • Page 78

    75 Convenient functions G Example 2 H Setup menu screen SETUP MENU SOURCE SELECT Source Input Assign Video Video Select BD SOURCE Auto Auto Video Mode Auto Game Movie Input Mode Input Mode Decode Mode SOURCE SELECT AUDIO ADJUST SYSTEM SETUP INFORMATION SAVE LOAD ReLoad Rename Source Level(analog) 0 Set dB < < Source Level(digital) 0 Set dB &l[...]

  • Page 79

    76 Convenient functions n Remembering set details (Ba ck up ) ST A TUS M-DAX Set the unit in the state you want remembering, and press and hold M-DAX and STATUS for at least 3 seconds. “MEMORY SAVING” is shown in the display, and the setting details are remembered. NOTE • The volume is not remembered. • If remembered details are overw[...]

  • Page 80

    77 Convenient functions Various memory functions n Personal memory plus function This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ ® XT, Dynamic EQ ® , audio delay etc.) last selected for the individual input sources. The surround parameters, tone settings and the volumes of the different speakers are stored for[...]

  • Page 81

    78 Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE, ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. Audio output There are two m[...]

  • Page 82

    79 Playback 1 Press Z2 to set the remote control unit to ZONE2-operation mode. 2 Press ON Z to turn on the ZONE2 power. “ZONE2 ON” appears on the display. The indicator on the display lights ( v page121 ). • When STANDBY X is pressed, ZONE2 turns off. • Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main uni[...]

  • Page 83

    80 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. How to make detailed settings Setting items Detailed items Description Page Audio Adjust Surr.Parameter Adjusts surround sound parameters. 86 Tone Adjusts the tonal quality of the sound. 87 Audyssey Settings [...]

  • Page 84

    81 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Speaker Setup HDMI Setup Audio Setup Network Setup ZONE2 Setup Option Setup Language Auto Setup Amp Assign Speaker Config. Bass Setting Distance Channel Level Crossover Freq. System Setup q Currently selected setup item w List of[...]

  • Page 85

    82 Examples of menu Below we describe typical examples of displays on the TV screen. Menu display Description Top menu display Audio Adjust Information Setup Wizard System Setup Input Setup Surr.Parameter Tone AudysseySettings Manual EQ M-DAX Audio Delay Menu w q Press AMP MENU to display the menu screen. w Displays the selected line. • Use ui[...]

  • Page 86

    83 Inputting characters You can change the names as desired using the “Preset Name” ( v page 106 ), “Rename” ( v page 109 ), “Napster Account” ( v page 100 ), “Last.fm Account” ( v page 100 ), “Zone Rename” ( v page102 ) and character input for the network functions. For inputting characters, there are two methods[...]

  • Page 87

    84 Inputting characters Cursor mode screen n Display of a cursor mode screen Default BD DVD VCR SAT GAME AUX BD DVD VCR SAT GAME AUX Rename [1/2] Input [ ] [SEARCH] Keyboard [RETURN] [ENTER] Enter Cancel q w q Character input section (Maximum 8 characters) w Guide for operation buttons Using the cursor buttons 1 Display the screen for inputting cha[...]

  • Page 88

    85 Audio Adjust The sound being played in the surround mode can be adjusted to your liking. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround modes and surround parameters” ( v page126 ). NOTE Some setting items cannot be s[...]

  • Page 89

    86 Surr.Parameter Default settings are underlined. Adjust surround sound parameters. It may not be possible to set this item depending on the input signal ( v page126 “Surround modes and surround parameters”). NOTE • You cannot set the surround parameters in the PURE DIRECT mode. • During playback in PURE DIRECT mode, the surround [...]

  • Page 90

    87 Audio Adjust Tone Adjust the tonal quality of the sound. Setting items Setting details Tone Control Set the tone control function to “ON” and “OFF”. ON : Allow tone adjustment (bass, treble). OFF : Playback without tone adjustment. “Tone Control” can be set when “Dynamic EQ ® ” ( v page 88 ) is set to “OFF”. NOTE • ?[...]

  • Page 91

    88 Audio Adjust Setting items Setting details Dynamic EQ ® Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT. ON : Use Dynamic EQ ® . OFF : Do not use Dynamic EQ ® . Reference Offset Audyssey Dynamic EQ ® is referenced to the standard film[...]

  • Page 92

    89 Audio Adjust Manual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ ® XT” setting ( v page87 ) is “Manual”. Setting items Setting details Adjust Channel Correct the tone of each speaker. q Select the speaker tone adjustment method. All : Adjust [...]

  • Page 93

    90 Information Show information about receiver settings, input signals, etc. Items Setting details Status Show information about current settings. n MAIN ZONE This item shows information about settings for MAIN ZONE. The information displayed differs according to the input source. Select Source / Name / Surround Mode / Input Mode / Decode Mode / As[...]

  • Page 94

    91 System Setup Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page87 ). • Can be[...]

  • Page 95

    92 Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v p[...]

  • Page 96

    93 System Setup Setting items Setting details Speaker Config. (Continued) F.Height : Set the presence and size of the front height speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the fr[...]

  • Page 97

    94 System Setup Setting items Setting details Channel Level Set the volume of the test tone to be the same when it is output from each speaker. Test Tone Start : Output test tone. • Front L / F.Height L / Center / F.Height R / Front R / Surround R / S.Back R z / S.Back L z / Surround L / Subwoofer : Select the speaker. z When the “Speaker Co[...]

  • Page 98

    95 System Setup HDMI Setup Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details Auto Lip Sync Make automatic compensation for timing shift in audio and video output. ON : Compensated. OFF : Not compensated. HDMI Audio Out Select HDMI audio output device. AMP : Play back through speakers connected[...]

  • Page 99

    96 System Setup Audio Setup Default settings are underlined. Make settings for audio playback. Setting items Setting details 7.1CH IN SW Lev. Set playback level of subwoofer signal input from the 7.1CH IN connector. +10dB : This is the recommended level. +15dB / +5dB / 0dB : Select the level according to the player being used. EQ Customize Set the [...]

  • Page 100

    97 Network Setup Default settings are underlined. Make network settings. Setting items Setting details Network Connect. Make settings for wired LAN. Only set “Network Connect.” when connecting to a network without a DHCP function. Network Connect. DHCP IP Address OFF 192.168.0.1 [ ] [ENTER] Enter Return Exit Detail q Network Connect. DHCP IP Ad[...]

  • Page 101

    98 System Setup Setting items Setting details Network Connect. (Continued) Proxy settings : Make this setting when connecting to the Internet via a proxy server. Network Connect. DHCP IP Address OFF 192.168.0.1 [ ] [ENTER] Enter Return Exit Detail q Network Connect. OFF 192.168.000.001 255.255.255.000 000.000.000.000 000.000.000.000 000.000.000.000[...]

  • Page 102

    99 System Setup Setting items Setting details Other Network function on/off setting during standby, and PC language setting. Network Standby : Set the network function on/off during standby. • ON : Network is on during standby. Main unit operable with a network compatible controller. • OFF : Suspend network function during standby. Set to[...]

  • Page 103

    10 0 System Setup Setting items Setting details Other (Continued) Notification : Sets the display of a notification message when the latest firmware is released. Update : Displays a notification message on this unit’s menu screen when the latest firmware is released with “Firmware Update”. The notification message is displayed for about[...]

  • Page 104

    101 System Setup Option Setup Default settings are underlined. Make various other settings. Setting items Setting details Volume Control Set the MAIN ZONE (room where the unit is located) volume setting. Volume Display : Set how volume is displayed. • Relative : Display ---dB (Min), in the range –80.5 dB to 18 dB. • Absolute : Display i[...]

  • Page 105

    10 2 System Setup Setting items Setting details GUI (Continued) NET/USB : Set the NET/USB screen display time when the input source is “NET/USB”. • Always : Show display continuously. • 30s : Show display for 30 seconds after operation. • 10s : Show display for 10 seconds after operation. • OFF : Turn display off. iPod : Set[...]

  • Page 106

    10 3 System Setup Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an update. Upgrade : Execute the upgrade process. When updating starts, the power indicator becomes red and the menu screen is shut down. The amount of update time which has elapsed is displayed. • If the upgrade[...]

  • Page 107

    10 4 System Setup Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Deutsch / Français “Language” can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit’s ZONE SELECT and STATUS for at least 3 seconds. “Video F[...]

  • Page 108

    10 5 Input Setup Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press AMP MENU . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the pr[...]

  • Page 109

    10 6 Input Setup Preset Name Assign name to a preset memory. Setting items Setting details Block Select the preset memory block. TUNER A / B / C / D / E / F / G A1 – G8 Change the display name of the selected channel. TUNER • Up to eight characters can be input. • For character input, see page83 . Default The changed preset name is r[...]

  • Page 110

    10 7 Input Assign Examples of “Input Assign” menu screen displays This screen appears when the “Input Setup” – “each input source” – “Input Assign” menu is selected. Use the “Input Assign” menu to change the w HDMI input connectors, e Digital input connectors, and r component input connectors that are assigned to the q input[...]

  • Page 111

    10 8 Input Setup Video Default settings are underlined. Set the source video. z “VCR”, “GAME” or “TV” can be set when “HDMI” ( v page107 ) or “COMPONENT” ( v page108 ) has been assigned. Setting items Setting details Video Select Video of another input source is played back combined with the playing audio. Source : Play th[...]

  • Page 112

    10 9 Input Mode (Audio) Default settings are underlined. The input modes available for selection may vary depending on the input source. Setting items Setting details Input Mode Set the audio input modes for the different input sources. It is normally recommended to set the audio input mode to “Auto”. Auto : Automatically detect input signal an[...]

  • Page 113

    11 0 Playback Mode Default settings are underlined. n Input source : “NET/USB” Setting items Setting details Repeat Make settings for repeat mode. Media Server Napster USB/iPod All : All files are played repeatedly (All files in a Folder or an album are played repeatedly). One : A file being played is played repeatedly. OFF : Repeat playback[...]

  • Page 114

    111 Other settings Remote control settings • When you connect a remote control receiver unit (purchased separately) to the REMOTE CONTROL IN connector of this unit, use the following procedure to disable the remote sensor function of this unit. • The remote sensor function of remote control signals is enabled by default. ONE TOUCH PLA Y P[...]

  • Page 115

    11 2 Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV devices 1 Press the input source select button ( v page 26 ). The operation mode of the remote control unit is switched as shown in the table. NOTE Pres[...]

  • Page 116

    11 3 Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers. NOTE • No preset codes other than BD , DVD , SAT and TV can be registered. • In the factory settings, remote control codes for [...]

  • Page 117

    11 4 Check the registered preset code 1 Press and hold down the input source select buttons for the appliance to control, and press SET until the SEND indicator blinks. 2 Press SEARCH/INFO . The LEARN indicator blinks twice. 3 To view the code for rst digit, press 1 . Count the number of times the LEARN indicator blinks (e.g. 3 blinks = 3) and w[...]

  • Page 118

    11 5 Operating devices The supplied remote control unit can control a device other than this unit. 1 Press the input source select button to which the preset code for the device you want to operate has been registered ( v page 112 ). 2 Operate the device. • For details, refer to the device’s operating instructions. n Blu-ray Disc player / HD[...]

  • Page 119

    11 6 n TV operation Operation buttons Function SOURCE Z / X TV power on/standby (Default : marantz) CLR Clear the inputting TV Z / X TV power on/standby (Default : marantz) TV INPUT Switch TV input (Default : marantz) CHANNEL +, – Switch channels (up/down) n Set top box for satellite (SAT) operation Operation buttons Function SOURCE Z / X Power o[...]

  • Page 120

    11 7 Operating learn function • This remote control unit is capable of learning and storing codes used by other remote controls that you already own. • If the AV device is not a marantz device, or if the device does not operate even when the preset code is registered, use the learning function. Remote codes for different devices can be re[...]

  • Page 121

    11 8 Registering preset codes Delete saved remote control codes Codes can be erased in three ways: by buttons, sources, and by all memory contents. n Delete remote control codes for each button 1 Press and hold down SET and SURROUND until the LEARN indicator blinks. The LEARN indicator blinks. 2 Press input source select buttons ( BD , DVD , SAT , [...]

  • Page 122

    Information 11 9 F Part names and functions v page120 F Other information v page125 F Troubleshooting v page134 F Specifications v page138 F Index v page139 F List of preset codes v page141 Information Here, we list various information related to this unit. Please refer to this information as needed. Basic version Adv anced v ers[...]

  • Page 123

    12 0 Front panel For buttons not explained here, see the page indicated in parentheses ( ). W1 Q8 Q8 Q8 Q8 Q9 W0 Q7 Q6 Q5 Q3 r t y u i o Q0 Q1 Q2 Q4 w q e q Power indicator (STANDBY) ············································ ( C 5 ) G Power indicator status in standby mode H • Normal standby : Red[...]

  • Page 124

    12 1 Display The input source name, surround mode, setting values and other information are displayed here. n Standard display q w q Master volume indicator w Input source indicator The currently selected input source name is displayed. If the input source name has been changed using “Input Setup” – “Rename” ( v page109 ) in the menu, [...]

  • Page 125

    12 2 Rear panel See the page indicated in parentheses ( ). o q w e r t y u i Q0 Q5 Q2 Q3 Q4 Q1 q RS-232C connector ·································································· ( 66 ) w FM/AM antenna terminals ··································?[...]

  • Page 126

    12 3 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). r e w q y u o Q1 Q3 Q5 Q6 Q7 Q9 Q8 W3 W4 W6 W5 W0 W1 W2 W7 W8 Q4 Q2 Q0 t i R5 R6 R4 R3 R2 R1 E9 E8 E7 E4 E5 E2 E1 E0 W9 E3 E6 R0 q LEARN indicator ······························· ( 113 , 117 ) w SET button ······?[...]

  • Page 127

    12 4 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with ne[...]

  • Page 128

    12 5 Other information n Trademark information ( v page125 ) n Surround ( v page126 ) n Relationship between video signals and monitor output ( v page130 ) n Explanation of terms ( v page131 ) Trademark information This product uses the following technologies: Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic[...]

  • Page 129

    12 6 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each s[...]

  • Page 130

    12 7 Surround Surround mode ( v page51 ) Surr.Parameter ( v page86 ) Tone z 8 ( v page87 ) Audyssey Settings z 9 ( v page87 ) M-DAX z 12 ( v page89 ) Height Gain z 7 ( v page86 ) PRO LOGIC g / g x Music mode only NEO:6 Music mode only Panorama ( v page86 ) Dimension ( v page86 ) C.Width ( v page86 ) C.Image ( v page86 [...]

  • Page 131

    12 8 Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table S This indicates the selectable surround mode. Surround mode ( v page51 ) NOTE Input signal types and f[...]

  • Page 132

    12 9 Surround Surround mode ( v page51 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag) DOLBY DIGI[...]

  • Page 133

    13 0 Relationship between video signals and monitor output Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO A A A A A A Only the menu is displayed A A A A S S <VIDEO> A S <VIDEO> S (VIDEO) A A (VIDEO) A S A S <COMPONENT> S <COMPONENT> A S (COMPONENT) A (COMPONENT)[...]

  • Page 134

    13 1 Explanation of terms A A2DP A2DP is one profile of Bluetooth definded for in-car devices or AV devices that use wireless communication instead of a cable. Adobe RGB color, Adobe YCC601 color Like “x.v.Color”, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model. AirPlay Air[...]

  • Page 135

    13 2 DTS Express DTS Express is an audio format supporting low bit rates (max. 5.1 channels, 24 to 256 kbps). DTS-HD This audio technology provides higher sound quality and enhanced functionality than the conventional DTS and is adopted as an optional audio for Blu-ray Disc. This technology supports multi-channel, high data transfer speed, high sam[...]

  • Page 136

    13 3 Explanation of terms W WAV (Wave) WAV is a standard audio format of Windows. The file size tends to increase, but sound near the original sound can be maintained. Windows Media DRM This is a copyright protection technology developed by Microsoft. Content providers are using the digital rights management technology for Windows Media contained [...]

  • Page 137

    13 4 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malf[...]

  • Page 138

    13 5 G Audio H Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. • Check the speaker connections and configurations. • Check whether the audio device power is turned on. • Adjust the master volume. • Cancel the mute mode. • Select a suitable input source. • Select a suitabl[...]

  • Page 139

    13 6 G Internet radio / Media server / iPod / USB memory device / Flickr / Last.fm / Napster H Symptom Cause/Solution Page When a USB memory device is connected, “USB” is not displayed on the menu. • The set cannot recognize a USB memory device. Check the connection. • A USB memory device not conforming to mass storage class or MTP st[...]

  • Page 140

    13 7 G AirPlay H Symptom Cause/Solution Page The AirPlay icon is not displayed in iTunes or on the iPhone/iPod touch/ iPad. • This unit and the computer or iPhone/iPod touch/iPad are not connected to the same network (LAN). Connect the computer or iPhone/iPod touch/iPad to the same network as this unit. • iTunes or the iPhone/iPod touch/i[...]

  • Page 141

    13 8 Specifications n Audio section • Power amplifier Rated output: Front: 100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Center: 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Surround: 100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Surround back: 100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Maximum eff[...]

  • Page 142

    13 9 v Nummer 2.1-channel ························································· 62 3D ········································································· 7 5.1-channel ·····················[...]

  • Page 143

    14 0 v M Maintenance Mode ·········································· 104 MAIN ZONE ····················································· 132 Manual EQ ····················································[...]

  • Page 144

    14 1 List of preset codes Device select : BD Blu-ray Disc Player D Denon 5034, 5035, 5036 H Hitachi 5031, 5032, 5033 I Integra 5013 J JWC 5014, 5015, 5017, 5018, 5019, 5020 L LG 5010, 5011 M marantz 5000, 5026, 5027 Mitsubishi 5024, 5025 O Onkyo 5013 P Panasonic 5001, 5002, 5003 Philips 5004 Pioneer 5005 R RCA 5012 S Samsung 5005 Sharp 5028, 5029, [...]

  • Page 145

    14 2 Dimensions Unit : mm 348.5 389.0 13.0 148.0 161.0 440.0 18 22.5 Weight : 10.6 kg Basic version Adv anced version Infor mation Infor mation[...]

  • Page 146

    D&M Holdings Inc. 3520 1 0028 003M V00[...]