Mazda Tribute (2002) manual

Introduction 4 Congratulations 4 Safety and environment protection 5 Symbol glossary 8 Instrument Cluster 14 W arning and control lights 14 Gauges 20 Entertainment Systems 23 AM/FM stereo with CD 23 AM/FM stereo cassette with 6-disc CD changer 42 Climate Controls 69 Manual heating and air conditioning 69 Lights 73 Headlamps 73 Bulb replacement 77 D[...]

Seating and Safety Restraints 109 Seating 109 Safety restraints 120 Air bags 131 Child restraints 140 Driving 150 Starting 150 Brakes 155 T ransmission operation 159 V ehicle loading 178 T railer towing 180 Recreational towing 185 Roadside Emergencies 186 Hazard flasher switch 188 Fuses and relays 189 Jump starting 202 W recker towing 207 Customer [...]

Maintenance and Specifications 225 Hood 231 Engine compartment 233 Engine oil 235 Battery 239 Fuel information 246 Air filter(s) 261 Refill capacities 267 Engine data 269 V ehicle dimensions 269 Accessories 272 Cellular phone warning 272 Index 273 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recor[...]

The following warning may be required by California law: CALIFORNIA Proposition 65 W arning W ARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and [...]

W ARNING: This Owner’ s Guide describes every option and model variant available and therefore some of the items covered may not apply to your particular vehicle. Furthermore, due to printing cycles it may describe options before they are generally available. W ARNING: Remember to pass on the Owner’ s Guide when reselling the vehicle. It is an [...]

W arning symbols on your vehicle When you see this symbol, it is imperative that you consult the relevant section of this guide before touching or attempting adjustment of any kind. Protecting the environment W e must all play our part in protecting the environment. Correct vehicle usage and the authorized disposal of waste cleaning and lubrication[...]

SPECIAL NOTICES Special instructions For your added safety , your vehicle is fitted with sophisticated electronic controls. W ARNING: By operating other electronic equipment (e.g. mobile telephone without exterior aerial) electromagnetic fields can occur which can cause malfunctions of the vehicle electronics. Therefore you should observe the instr[...]

These are some of the symbols you may see on your vehicle. V ehicle Symbol Glossary Safety Alert See Owner’ s Guide Protecting the Environment Fasten Safety Belt Air Bag-Front Air Bag-Side Child Seat Child Seat Installation W arning Child Seat T ether Anchorage Brake System Anti-Lock Brake System Brake Fluid - Non-Petroleum Based T raction Contro[...]

V ehicle Symbol Glossary Power W indow Lockout Child Safety Door Lock/Unlock Interior Luggage Compartment Release Symbol Panic Alarm System Feature Engine Oil Engine Coolant Engine Coolant T emperature Do Not Open When Hot Battery A void Smoking, Flames, or Sparks Battery Acid Explosive Gas Fan W arning Power Steering Fluid Maintain Correct Fluid L[...]

INFORMATION ABOUT THIS GUIDE The information found in this guide was accurate at the time of printing. Mazda may change the contents without notice. Introduction 10[...]

Instrument Cluster 11[...]

Instrument cluster (pg. 14) W indshield wiper/washer control (pg. 82) Manual tilt steering wheel lever (pg. 85) Driver air bag (pg. 131) Speed controls* (pg. 90) Instrument panel dimmer control (pg. 74) Power mirror control* (pg. 89) Fog lamp control* (pg. 74) Headlamp and turn signal control (pg. 73) * if equipped Instrument Cluster 12[...]

Audio system (pg. 23) 4WD control* (pg. 169) Climate controls (pg. 69) Auxiliary power point (pg. 87) Rear window defroster control (pg. 72) Hazard flasher control (pg. 188) Possible V ariation* Instrument Cluster 13[...]

W ARNING LIGHTS AND CHIMES W arning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’ s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains [...]

T emporary malfunctions may cause your light to illuminate. Examples are: 1. The vehicle has run out of fuel. (The engine may misfire or run poorly .) 2. Poor fuel quality or water in the fuel. 3. The fuel cap may not have been properly installed and securely tightened. These temporary malfunctions can be corrected by filling the fuel tank with hig[...]

Air bag readiness Illuminates to confirm that the air bags (front or side) are operational. If the light fails to illuminate, continues to flash or remains on, have the system serviced immediately . Safety belt Illuminates to remind you to fasten your safety belts. For more information, refer to the Seating and safety restraints chapter . Brake sys[...]

W ARNING: If the light remains on, continues to flash or fails to illuminate, have the system serviced immediately . With the ABS light on, the anti-lock brake system is disabled and normal braking is still effective unless the brake warning light also remains illuminated with the parking brake released. T urn signals Illuminates when the turn sign[...]

Engine oil pressure Illuminates when the oil pressure falls below the normal range. Check the oil level and add oil if needed. Refer to Engine oil in the Maintenance and specifications chapter . T o avoid engine damage, stop the vehicle as soon as safely possible and switch off the engine immediately . Check the oil level and add oil if needed. Fou[...]

Low coolant (if equipped) Illuminates when the coolant level in the coolant reservoir is low and more needs to be added. For more information on adding engine coolant, refer to Engine coolant in the Maintenance and specifications chapter . If the lamp stays on, to avoid engine damage you should allow the engine to cool down, then check the coolant [...]

Key-in-ignition warning chime Sounds when the key is left in the ignition and the door , liftgate or liftgate window is opened. Headlamps ON warning chime Sounds when the headlamps or parking lamps are on, the key is removed from the ignition and the driver’ s door is opened. GAUGES Engine coolant temperature gauge Indicates the temperature of th[...]

NOTE: This gauge indicates the temperature of the engine coolant, not the coolant level. If the coolant is not at its proper level the gauge indication will not be accurate. T achometer Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scale may damage the engine. Speedometer I[...]

Fuel gauge Displays approximately how much fuel is in the fuel tank. The fuel gauge may vary slightly when the vehicle is in motion or on a grade. When refueling the vehicle from empty indication, the amount of fuel that can be added will be less than the advertised capacity due to the reserve fuel. NOTE: The fuel filler door is located on the driv[...]

AM/FM RADIO WITH COMPACT DISC PLAYER V olume/power control Ensure that the ignition switch is in the ACC or ON position. Press the control to turn the audio system on. T urn the control to raise or lower the volume. Press the control again to turn the audio system off. NOTE: T o prevent the battery from being discharged, do not leave the audio syst[...]

T une adjust The tune control works in radio mode. Tune adjust in radio mode • Press to move up the frequency band in individual increments. • Press to move down the frequency band in individual increments. Seek function The seek function control works in radio mode. Seek function in radio mode Press and momentarily hold the SEEK control. A bee[...]

Scan function The scan function works in radio mode. Scan function in radio mode Press the SCAN control to hear a sampling of strong stations on the frequency band. Each station will play for approximately 5 seconds. Press the SCAN control again to remain on a station and disable this mode. CD select • T o begin CD play (if CD is loaded), press t[...]

Bass adjust The bass adjust control allows you to increase or decrease the audio system’ s bass output. Press the AUDIO control until BASS is illuminated in the display . T urn the volume control to adjust to the desired level of bass. Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. Press the AUDIO control u[...]

Radio station memory preset The radio is equipped with five station memory preset controls. These controls can be used to select up to five preset AM stations and ten FM stations (five in FM1 and five in FM2). Setting memory preset stations 1. Select the frequency band with the AM/FM control. 2. Select the desired station. 3. Press and momentarily [...]

Random play in CD mode Press the RDM control during play . RDM will illuminate in the display . The next selection will be randomly selected. T o disengage random play , press the RDM control again. Repeat play The repeat play feature works in CD mode and repeats the current CD selection. Repeat play in CD mode Press the RPT control during play . R[...]

automatically reverse one hour . For example, if the original setting is 3:24, the time will change to 3:00. If the clock’ s current time setting is within the latter part of the hour (from 30 to 59 minutes), the hour setting will automatically advance one hour . For example, if the original setting is 3:45, the time will change to 4:00. Changing[...]

Press the control to turn the audio system on or off. T urn the control to raise or lower the volume. NOTE: T o prevent the battery from being discharged, do not leave the audio system on for a long period when the engine is not running. NOTE: Once the system is turned off, press the VOL control again to listen to the frequency last tuned to. AM/FM[...]

Note: If the FM broadcast signal becomes weak, reception automatically changes form STEREO to MONO for reduced noise and the ST incdicator will go out. T une audio control The TUNE control is a multi-functional control which works in radio, tape and CD modes to adjust the levels of bass, treble, balance, fade and mid-range. Press the TUNE control t[...]

T urn the TUNE control to the left for a lower frequency . T urn the TUNE control to the right for a higher frequency . Scan function The scan function works in radio and CD mode. Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCAN control again to disable scan[...]

Seek function in radio mode Press and momentarily hold the SEEK control. • Press to find the next listenable station up the frequency band. • Press to find the next listenable station down the frequency band. NOTE: If you continue to press and hold the control, the frequency will continue changing without stopping. Release the control after the[...]

Bass adjust The bass adjust control allows you to increase or decrease the audio system’ s bass output. Press the audio control until BASS appears. T urn the control to increase (right) or decrease (left) the amount of bass output. Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. Press the audio control until[...]

T urn the control (right or left) to adjust between the front and rear speakers. Speaker balance adjust Speaker sound distribution can be adjusted between the right and left speakers. Press the audio control until BAL appears. T urn the control (right or left) to adjust between the right and left speakers. Entertainment Systems 35[...]

Mid-range adjust (if equipped) Y our vehicle may be equipped with a mid-range adjust. The TUNE control allows you to adjust the mid-range levels. Press the audio control until MID appears in the display . T urn the control to the right to increase the mid-range. T urn the control to the left to decrease the mid-range. The level will display . Relea[...]

The preset control number will illuminate in the display . This indicates the station is held in memory on the control you selected. Repeat this procedure to store other stations in memory . T o tune one in the memory , select AM, FM1 or FM2 and then press its channel preset button. The station frequency and the channel number will be displayed. Au[...]

NOTE: If the power supply is interrupted, (fuse blows or the battery is disconnected), the preset channels will be canceled. T ape select T o begin tape play , insert a cassette tape into the cassette slot, with the open edge facing the right. Once inserted, the cassette tape will automatically begin play and T APE will appear in the display . At t[...]

Rewind The rewind control works in CD mode. In CD mode, press and hold the rewind control to reverse through a track at a high speed. Repeat play The repeat play feature works in CD mode and allows you to listen to a selection repeatedly . Repeat play in CD mode Press the RPT control during play . RPT will illuminate in the display . The current se[...]

Press the DISC down control to skip back to the beginning of the previous CD. Ejecting a CD The eject feature works in CD mode. 1. Press the control to stop and eject a CD. The disc number and OUT will appear in the display . 2. Remove the CD. NOTE: When a CD is ejected during play , the next CD will be played automatically . Random play The random[...]

2. Press on the hour set control to adjust the hours. 3. Press on the minute set control to adjust the minutes. 4. Press the CLOCK control again to start the clock. NOTE: If the power supply to the unit is interrupted (if the fuse blows or the vehicle’ s battery is disconnected), the clock will need to be reset. NOTE: If the time is not adjusted [...]

AM/FM RADIO WITH CASSETTE AND 6 DISC CD CHANGER V olume/power control Press the control to turn the audio system on or off. T urn the control to raise or lower volume. If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.[...]

AM/FM select The AM/FM select control works in radio, tape and CD modes. AM/FM select in radio mode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FM select in tape mode Press this control to stop tape play and begin radio play . AM/FM select in CD mode Press[...]

Scan function The scan function works in radio, tape or CD mode. Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCAN control again to stop the scan mode. Scan function in tape mode Press the SCAN control to hear a short sampling of all selections on the tape. ([...]

Bass adjust The bass adjust control allows you to increase or decrease the audio system’ s bass output. Press the AUDIO once to access the system’ s bass adjust mode. T urn the control to increase (right) or decrease (left) the amount of bass output. Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. Press th[...]

Setting memory preset stations 1. Select the frequency band with the AM/FM control. 2. Select a station. 3. Press and momentarily hold the desired preset control until a beep is heard. The preset control number will illuminate in the display . This indicates the station is held in memory on the control you selected. Repeat this procedure to store o[...]

CD select T o begin CD play (if CD[s] are loaded), press the CD control. The first track of the disc will begin playing. After that, CD play will begin where it stopped last. Rewind The rewind control works in tape and CD modes. • In tape mode, radio play will continue until rewind is stopped (with the T APE control) or the beginning of the tape [...]

Repeat play in CD mode Press the RPT control during play . RPT will illuminate in the display . The current selection will be repeated. T o disengage repeat play , press the RPT control again. Load The load feature allows you to load up to six single CDs into the audio system. This six disc CD player is equipped with a CD door . Compact discs shoul[...]

Eject function Press the control to stop and eject a tape. Random play/Blank skip feature Random play in CD mode The random play feature (RDM) works in CD mode and plays the selections on the current CD in random order . Press the RDM control during play . RDM will illuminate in the display . The next selection will be randomly selected. T o diseng[...]

AM/FM RADIO WITH CASSETTE T APE AND COMPACT DISC PLAYER/CHANGER (IN-DASH CD CHANGER) V olume/power control Ensure that the ignition is either in the ACC or ON position for the audio system to function. Press the control to turn the audio system on or off. Entertainment Systems 50[...]

T urn the control to raise or lower the volume. NOTE: T o prevent the battery from being discharged, do not leave the audio system on for a long period when the engine is not running. NOTE: Once the system is turned off, press the VOL control again to listen to the frequency last tuned to. AM/FM select Ensure that the ignition is in the ACC or ON p[...]

Press the TUNE control to select the desired function. T urn the TUNE control to adjust the desired levels. Refer to T reble adjust for specific instructions on level adjustments. The TUNE control will also work in radio mode to manually increase or decrease the frequency . T urn the TUNE control to the left for a lower frequency . T urn the TUNE c[...]

Scan function The scan function works in radio and CD mode. Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCAN control again to disable scan mode. Scan function in CD mode Press the SCAN control during CD play to hear the first ten seconds of each track. Press[...]

Press the audio control until TREB is displayed. T urn the control to increase (right) or decrease (left) the amount of treble output. Bass adjust The bass adjust control allows you to increase or decrease the audio system’ s bass output. Press the audio control until BASS appears. Entertainment Systems 54[...]

T urn the control to increase (right) or decrease (left) the amount of bass output. Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. Press the audio control until F ADE appears. T urn the control (right or left) to adjust between the front and rear speakers. Speaker balance adjust Speaker sound distribution can[...]

Press the audio control until BAL appears. T urn the control (right or left) to adjust between the right and left speakers. Mid-range adjust (if equipped) Y our vehicle may be equipped with a mid-range adjust. The TUNE control allows you to adjust the mid-range levels. Press the audio control until MID appears in the display . Entertainment Systems[...]

T urn the control to the right to increase the mid-range. T urn the control to the left to decrease the mid-range. The level will display . Release the TUNE control when the desired level is reached. NOTE: Approximately 5 seconds after selecting any mode, the volume function will be automatically selected. T o reset the mid-range, press the TUNE co[...]

Auto memory tuning Auto memory tuning allows you to set strong radio stations without losing your original manually set preset stations. This feature is helpful on trips when you travel between cities with different radio stations. Starting autoset memory preset 1. Press the AM or FM1/2 control to select a frequency . 2. Press and momentarily hold [...]

The cassette’ s top side is playing when is illuminated in the display . The cassette’ s bottom side is playing when is illuminated in the display . NOTE: When a metal tape is inserted, the player will automatically compensate and MTL will appear in the display . Press the VOL (V olume) control to stop cassette play . CD select T o begin CD pla[...]

Repeat play in tape mode Press the RPT control during play . RPT will illuminate in the display . The current selection will be repeated. T o disengage repeat play , press the RPT control again. NOTE: RPT may not operate properly if: • A tape was recorded at a low level. • A tape has long, silent intervals. • A tape is a live recording. • A[...]

Disc search Disc search works in CD mode. Press the DISC up control to skip forward to the beginning of the next CD. Press the DISC down control to skip back to the beginning of the previous CD. Dolby T noise reduction Dolby t noise reduction operates only in tape mode. Dolby t noise reduction reduces the amount of hiss and static during tape playb[...]

T o disengage APC, press the APC control again. If APC detects 15 seconds of blank space, it will automatically advance the tape to the next selection. NOTE: APC may not operate properly if: • A tape was recorded at a low level. • A tape has long, silent intervals. • A tape is a live recording. • A tape has very short intervals of less than[...]

Inserting CDs into desired tray number 1. Press and hold the LOAD control until a beep is heard. 2. Press the memory preset control for the deisred CD tray within 5 seconds after the beep is heard. 3. When IN is displayed, insert the CD. NOTE: The CD cannot be inserted to the desired tray number if the number is already occupied. Eject feature The [...]

Multiple ejection 1. Press and hold the CD eject control for approximately 2 seconds until a beep is heard. 2. W ait approximately 5 seconds or press the CD eject control again within 5 seconds after the beep is heard. 3. Remove the CD. The next CD will then be ejected. NOTE: • Cds will be ejected in numerical order , lowest number first. • All[...]

2. Press on the hour set control to adjust the hours. 3. Press on the minute set control to adjust the minutes. 4. Press the CLOCK control again to start the clock. NOTE: If the power supply to the unit is interrupted (if the fuse blows or the vehicle’ s battery is disconnected), the clock will need to be reset. NOTE: If the time is not adjusted [...]

T ROUBLESHOOTING THE CD CHANGER (IF EQUIPPED) If sound skips: • Y ou may be traveling on a rough road, playing badly scratched discs or the disc may be dirty . Skipping will not scratch the discs or damage the player . If your changer does not work, it may be that: • A disc is already loaded where you want to insert a disc. • The disc is inse[...]

• When driving over rough or uneven surfaces, the audio sound may jump. • The CD player has been designed to play CDs bearing the identification logo as shown. No other discs can be played. • Do not stick paper or tape on the CD. A void scratching the reverse side of the CD (the side without a label). • Dust, finger smudges, and dirt can de[...]

Radio reception factors Three factors can affect radio reception: • Distance/strength. The further an FM signal travels, the weaker it is. The listenable range of the average FM station is approximately 40 km (24 miles). This range can be affected by “signal modulation.” Signal modulation is a process radio stations use to increase their stre[...]

MANUAL HEATING AND AIR CONDITIONING SYSTEM Fan speed control Controls the volume of air circulated in the vehicle. T emperature control knob Controls the temperature of the airflow inside the vehicle. Mode selector control Controls the direction of the airflow to the inside of the vehicle. The air conditioning compressor will operate in all modes e[...]

NOTE: In snowy or dirty conditions, leave the mode selector in the OFF position. • MAX A/C- Uses recirculated air to cool the vehicle. MAX A/C is noisier than A/C but more economical and will cool the inside of the vehicle faster . Airflow will be from the instrument panel registers. This mode can also be used to prevent undesirable odors from en[...]

• (Defrost)-Distributes outside air through the windshield defroster ducts. It can be used to clear ice or fog from the windshield. If the temperature is about 6°C (43°F) or higher , the air conditioner will automatically dehumidify the air to reduce fogging. Operating tips • In humid weather conditions, place the climate control system in De[...]

• Do not place objects over the defroster outlets. These objects can block airflow and reduce visibility through your windshield. A void placing small objects on top of the instrument panel. These objects may fall down into the defroster outlets and block airflow , in addition to, damaging the climate control system. T o aid in side window defogg[...]

HEADLAMP CONTROL Rotate the headlamp control to the first position to turn on the parking lamps. Rotate to the second position to turn on the headlamps. Daytime running lamps (DRL) (if equipped) T urns the headlamps on with a reduced output. T o activate: • the ignition must be in the ON position and • the headlamp control is in the OFF or Park[...]

Flash to pass Pull toward you slightly to activate and release to deactivate. FOG LAMP CONTROL (IF EQUIPPED) The fog lamps can only be turned on when the headlamp control is in the low beams position. Press the foglamp control to activate the fog lamps. The fog lamp indicator light will illuminate. When the highbeams are activated, the fog lamps wi[...]

AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident the alignment of your headlamps should be checked by your authorized Mazda dealer . TURN SIGNAL CONTROL • Push down to activate the left turn signal. • Push up to activate the right turn signal. INTERIOR LAMPS Car[...]

The dome lamp will stay on if the control is moved to the passenger side position. When the control is in the middle position, the lamp will only come on when a door is opened. If the control is moved to the driver’ s side position, the lamp will not come on at all. W ith the control in the middle position, the dome lamp will illuminate whenever [...]

BULBS Replacing exterior bulbs Check the operation of the following lamps frequently: • Headlamps • Fog lamps (if equipped) • High-mount brake lamp • Brake lamps • T urn signals • License plate lamp • T ail lamps • Back-up lamps Do not remove lamp bulbs unless they can be replaced immediately with new ones. If a bulb is removed for [...]

Function Number of bulbs T rade number Park/turn lamps (front) 2 3157 AK (amber) Headlamps 2 9003 Rear stop/tail lamps 2 3157K Rear turn lamps 2 3156K Rear license plate lamps 2 3156K/168 Backup lamp 2 3156K Rear/turn/sidemarker 2 916NA (amber) Fog lamp (if equipped) 2 899 Cargo lamp 1 211-2 Interior overhead lamp 1 912 (906) Front door courtesy la[...]

Handle a halogen headlamp bulb carefully and keep out of children’ s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hands could cause the bulb to break the next time the headlamps are operated. NOTE : If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. 7. [...]

5. Pull the bulb straight out of the socket and push in the new bulb. 6. T o complete installation, follow the removal procedure in reverse order . Replacing front parking/turn lamp bulbs 1. Make sure that the headlamp control is in the OFF position. 2. Open the hood. The position lamps are located on the bottom half of each headlamp. 3. Disconnect[...]

Replacing fog lamp bulbs (if equipped) 1. Remove the bulb socket from the fog lamp by turning counterclockwise. 2. Disconnect the electrical connector from the fog lamp bulb. 3. Connect the electrical connector to the new fog lamp bulb. 4. Install the bulb socket in the fog lamp turning clockwise. Replacing license plate lamp bulbs 1. Remove two sc[...]

WINDSHIELD WIPER AND W ASHER For intermittent operation, move control down one position. Adjust the rotary control to the desired speed setting. For normal or low speed wiper operation, move control down two positions from OFF . For high speed wiper operation, move control down three positions from OFF . Driver Controls 82[...]

T o activate the windshield washer , pull control toward you. Release control to stop washer fluid spray . MIST FUNCTION Move control up and release for one wipe. Windshield wiper blades Check the wiper blades at least twice a year or when they seem less effective. Substances such as tree sap and some hot wax treatments used by commercial car washe[...]

Changing the wiper blades T o replace the wiper blades: 1. Pull the wiper arm away from the windshield and lock into the service position. 2. T urn the blade at an angle from the wiper arm. Push the lock pin manually to release the blade and pull the wiper blade down toward the windshield to remove it from the arm. 3. Attach the new wiper to the wi[...]

T o activate the rear washer , rotate the control to the position and release. Rear window wiper blades Refer to Windshield wiper blades in this section for more information on rear wiper blades. MANUAL TILT STEERING COLUMN Push the tilt steering wheel lever downward to move the steering wheel up or down. Pull the control up into the original posit[...]

OVERHEAD CONSOLE (IF EQUIPPED) The appearance of your vehicle’ s overhead console will vary according to your option package. Storage compartment (if equipped) Press the OPEN control to open the storage compartment. The door will open slightly and can be moved to full open. Installing a garage door opener (if equipped) The storage compartment can[...]

AUXILIARY POWER POINT W ARNING: Power outlets are designed for accessory plugs only . Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty . The auxiliary power point is located on the instrument panel below the radio. Do not plug optional electrical acc[...]

POWER WINDOWS Press and hold the rocker switches to open and close windows. • Press the top portion of the rocker switch to close. • Press the bottom portion of the rocker switch to open. One touch down • Press AUTO completely down to the second detent. The driver’ s window will open fully . Depress up to stop window operation. Driver Contr[...]

NOTE: This feature will only operate the driver’ s side window . Window lock The window lock feature allows only the driver to operate the power windows. T o lock out all the window controls except for the driver’ s press the right side of the control. NOTE: The window switches will not illuminate when the window control is in the LOCKED positi[...]

Fold-away mirrors Pull the side mirrors in carefully when driving through a narrow space, like an automatic car wash. SPEED CONTROLS (IF EQUIPPED) T o turn speed control on • Press ON. NOTE: V ehicle speed cannot be controlled until the vehicle is traveling at or above 48 km/h (30 mph). W ARNING: Do not use the speed control in heavy traffic or o[...]

T o turn speed control off • Press OFF . NOTE: Once speed control is turned off or the ignition is switched off, the previously programmed set speed will be erased. T o set a speed • Press SET ACC. NOTE: For speed control to operate, the speed control must be ON and the vehicle speed must be greater than 48 km/h (30 mph). If you drive up or dow[...]

T o set a higher set speed • Press and hold SET ACC. Release the control when the desired vehicle speed is reached or • Press and release SET ACC to operate the T ap-Up function. Each press will increase the set speed by 1.6 km/h (1 mph) or • Accelerate with your accelerator pedal. When the desired vehicle speed is reached, press and release [...]

T o disengage speed control • Depress the brake pedal or • Depress the clutch pedal (if equipped). NOTE: Disengaging the speed control will not erase the previously programmed set speed. NOTE: Fully depressing the clutch pedal may cause a flare in engine RPM as the throttle is returned to idle. This is normal. NOTE: Pressing OFF will erase the [...]

T o return to a previously set speed • Press RSM. NOTE: For RSM to operate, the vehicle speed must be faster than 48 km/h (30 mph). MOON ROOF (IF EQUIPPED) T o operate the moon roof: • The moon roof is equipped with an automatic, one-touch, express opening feature. Press and release the rear portion of the control. T o stop motion at any time d[...]

CENTER CONSOLE Y our vehicle may be equipped with a variety of console features. These include: • Utility compartment • Cupholders • Ashcup W ARNING: Use only soft cups in the cupholder . Hard objects can injure you in a collision. CARGO COVER (IF EQUIPPED) Y our vehicle may be equipped with a cargo area shade that covers the luggage compartm[...]

W ARNING: The cover may cause injury in a sudden stop or accident if it is not securely installed. LIFTGATE T o open the rear window , pull the right side of the liftgate handle. T o open the liftgate, pull the left side of the liftgate handle. • Do not open the liftgate or liftgate glass in a garage or other enclosed area with a low ceiling. If [...]

LUGGAGE RACK The maximum load for the roof rack is 44 kg (100 lbs), evenly distributed on the crossbars. If it is not possible to evenly distribute the load, position it in the center or as far forward on the crossbars as possible. Always use the adjustable tie down loops to secure the load. T o adjust the cross-bar position: 1. Loosen the thumbwhe[...]

KEYS The key operates all locks on your vehicle. In case of loss, replacement keys are available from your dealer . Y ou should always carry a second key with you in a safe place in case you require it in an emergency . Refer to SecuriLock y Passive Anti-Theft System for more information. POWER DOOR LOCKS Press control to unlock all doors. Press co[...]

Childproof door locks When these locks are set, the rear doors cannot be opened from the inside. The rear doors can be opened from the outside when the doors are unlocked. The childproof locks are located on rear edge of each rear door and must be set separately for each door . NOTE: Setting the lock for one door will not automatically set the lock[...]

Unlocking the doors Press this control to unlock the driver’ s door . The interior lamps will illuminate. The flashers will flash twice to confirm the vehicle is unlocked. Press the control a second time within three seconds to unlock all doors. Locking the doors Press this control to lock all doors. If all doors are closed, the flashers will fla[...]

Replacing the battery The transmitter is powered by one coin type three-volt lithium battery CR2032 or equivalent. T ypical operating range will allow you to be up to 10 meters (33 feet) away from your vehicle. A decrease in operating range can be caused by: • weather conditions • nearby radio towers • structures around the vehicle • other [...]

Programming remote transmitters It is necessary to have all (maximum of four — original and/or new) of your remote transmitters available prior to beginning this procedure. NOTE: This procedure must be completed within the specified times. If not completed within the specified time period, reprograming procedures must be restarted from the beginn[...]

The inside lights will not turn off if: • they have been turned on in the dome lamp control or • any door is open NOTE: The battery saver will shut off the interior lamps 40 minutes after the ignition has been turned to the OFF position. SECURILOCK Y PASSIVE ANTI-THEFT SYSTEM SecuriLock y passive anti-theft system is an engine immobilization sy[...]

Key information Y our vehicle is supplied with two coded keys. Only a coded key will start your vehicle. Spare coded keys can be purchased from your authorized Mazda dealership. Y our dealership can program your key or you can “do it yourself”, refer to Programming spare keys. The SecuriLock y passive anti-theft system is not compatible with af[...]

If your keys are lost or stolen you will need to do the following: • Use your spare key to start the vehicle. or • Have your vehicle towed to an authorized Mazda dealership. . The key codes will need to be erased from your vehicle and new key codes will need to be re-coded. Replacing coded key can be very costly and you may want to store an ext[...]

1. Insert the first previously programmed coded key into the ignition and turn the ignition from 2 (ACC) to 3 (ON) (maintain ignition in 3 (ON) for at least one second). 2. T urn ignition to 1 (LOCK) and remove the first coded key from the ignition. 3. W ithin ten seconds of turning the ignition to 2 (ACC), insert the second previously programmed c[...]

PERIMETER ALARM SYSTEM (IF EQUIPPED) The perimeter anti-theft system will respond if unauthorized entry is attempted. If there is any potential perimeter anti-theft problem with your vehicle, ensure ALL key fobs (remote entry transmitters) are brought to authorized Mazda dealership, to aid in troubleshooting. Arming the system When armed, this syst[...]

Disarming the system Y ou can disarm the system by any of the following actions: • Unlock the doors by using your remote entry transmitter . • Unlock the doors with a key . • Press the panic control on the remote entry transmitter . This will disarm the system only if the alarm is sounding. Locks and Security 108[...]

SEA TING Adjustable head restraints (if equipped) Y our vehicle’ s seats are equipped with head restraints which are vertically adjustable. The purpose of these head restraints is to help limit head motion in the event of a rear collision. T o properly adjust your head restraints, lift the head restraint so that it is located directly behind your[...]

W ARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. W ARNING: Sitting in a reclined position while the vehicle is moving is dangerous because you don’ t get the full protection from seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal i[...]

Using the manual lumbar support (if equipped) The lumbar support control is located on the inboard side of the driver’ s seat. T urn the lumbar support control clockwise to increase firmness. T urn the lumbar support control counterclockwise to increase softness. Adjusting the front power seat (if equipped) W ARNING: Never adjust the driver’ s [...]

Move the rear of the control up or down to raise or lower the rear portion of the seat cushion. Move the control in the directions shown to move the seat forward, backward, up or down. REAR SEATS Head restraints (if equipped) Y our vehicle’ s seats may be equipped with head restraints which are vertically adjustable. The purpose of these head res[...]

Push control to lower head restraint. Folding down rear seats 1. Raise the rear seat head restraint and remove. 2. Place the head restraints under the front passenger seat for storage. 3. Pull the seat release control. Seating and Safety Restraints 113[...]

4. Flip seat forward. 5. Pull the seatback release strap toward the front seat. Make sure the seat belt buckle heads are fully extended towards the front of the vehicle and are away from the seatback. NOTE: When the seatback release strap is pulled use your other hand to guide the seatback. Seating and Safety Restraints 114[...]

6. Rotate seatback down into load floor position. W ARNING: Make sure seat belt buckle heads are not trapped underneath the seatback and that the seat belt buckle heads are fully extended towards the front of the vehicle. Seat belt buckle heads may break if they are trapped underneath the seatback as the seatback is rotated down. NOTE: Make sure th[...]

2. Rotate seat cushion down into the seating position making sure that the seat cushion is locked into place and that the seat belt buckles are exposed. 3. Remove the head restraints stored under the front passenger seat and return them to the original position on the seat backs. T o remove the rear cushion 1. Pull the Y ellow tab 2. Pull the cushi[...]

T o install the rear cushion 1. Push the cushion to the inboard side of the vehicle. 2. Make sure that the hinges are locked into place. Folding down rear seats 1. Raise the rear seat head restraint and remove. 2. Place the head restraints under the front passenger seat for storage. Seating and Safety Restraints 117[...]

3. Pull the seat release control on each side of the seat to release the locks. 4. Flip seat forward. 5. Pull the seatback release strap toward the front seat. Make sure the seat belt buckle heads are fully extended towards the front of the vehicle and are away from the seatback. NOTE: When the seatback release strap is pulled use your other hand t[...]

Returning the rear seats to upright position 1. Pull seatback up and into upright position making sure seatback locks into place. 2. Rotate seat cushion down into the seating position making sure that the seat cushion is locked into place and that the seat belt buckles are exposed. 3. Remove the head restraints stored under the front passenger seat[...]

SAFETY RESTRAINTS Safety restraints precautions W ARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. W ARNING: T o reduce the risk of injury , make sure children sit where they can be properly restrained. W ARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. [...]

W ARNING: Placing a child, 12 years or younger , in the front seat is dangerous. The child could be hit by a deploying air bag and be seriously injured or even killed. A sleeping child is more likely to lean against the door and be hit by the side air bag in a moderate collision. Whenever possible, always secure a child, 12 years or younger , in th[...]

Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. 2. T o unfasten, push the release button and remove the tongue from the buckle. The front and rear outbo[...]

When to use the automatic locking mode • Any time a child safety seat is installed in a passenger front or outboard rear seating position (if equipped). Children 12 years old and under should be properly restrained in the rear seat whenever possible. Refer to Safety Restraints for Children or Safety Seats for Children later in this chapter . How [...]

How to disengage the automatic locking mode Disconnect the combination lap/shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. W ARNING: After any vehicle collision, the front passenger outboard seat belt system must be checked by an authorized Mazda d[...]

Front safety belt height adjustment Y our vehicle has safety belt height adjustments for the driver and front passenger . Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder . T o lower the shoulder belt height, push the button and slide the height adjuster down. T o raise the height of the shoulder belt, sli[...]

W ARNING: Failure to replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a collision. The seat belt pretensioners will only function once. After they are deployed, they will not work again and must be replaced immediately , even if there was no front seat occupant seated at the time. [...]

W ARNING: The lap belts should fit snugly and as low as possible around the hips, not around the waist. Failure to position the lap belt correctly may cause serious injury in an accident. Insert the tongue into the correct buckle (the buckle closest to the direction the tongue is coming from). T o lengthen the belt, turn the tongue at a right angle[...]

Conditions of operation If... Then... The driver’ s safety belt is not buckled before the ignition switch is turned to the ON position... The safety belt warning light illuminates 1-2 minutes and the warning chime sounds 4-8 seconds. The driver’ s safety belt is buckled while the indicator light is illuminated and the warning chime is sounding.[...]

Reasons given... Consider ... 9 I was in a hurry 9 Prime time for an accident. Belt Minder reminds us to take a few seconds to buckle up. 9 Seat belts don’t work 9 Safety belts, when used properly , reduce risk of death to front seat occupants by 45% in cars, and by 60% in light trucks. 9 T raffic is light 9 Nearly 1 of 2 deaths occur in single-v[...]

Safety belt maintenance Inspect the safety belt systems periodically to make sure they work properly and are not damaged. NOTE: If unsure about the proper procedures, bring your vehicle to an authorized Mazda dealership for inspection. Inspect the safety belts to make sure there are no nicks, tears or cuts, replacing if necessary . All safety belt [...]

AIR BAG SUPPLEMENT AL RESTRAINT SYSTEM (SRS) Important supplemental restraint system (SRS) precautions The supplemental restraint system is designed to work with the safety belt to help protect the driver and right front passenger from certain upper body injuries. W ARNING: Air bags DO NOT inflate slowly or gently and the risk of injury from a depl[...]

W ARNING: National Highway T raffic Safety Administration (NHTSA) recommends a minimum distance of at least 25 cm (10 inches) between an occupant’ s chest and the driver air bag module. W ARNING: Never place your arm over the air bag module as a deploying air bag can result in serious arm fractures or other injuries. Steps you can take to properl[...]

Children and air bags For additional important safety information, read all information on safety restraints in this guide. W ARNING: Children must always be properly restrained. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Failure to follow these inst[...]

The air bags inflate and deflate rapidly upon activation. After air bag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (e.g., baking soda) that result from the combustion process that inflates the air bag. Small [...]

• diagnostic module • and the electrical wiring which connects the components. The diagnostic module monitors its own internal circuits and the supplemental air bag electrical system warning (including the impact sensors), the system wiring, the air bag system readiness light, the air bag back up power and the air bag ignitors. Determining if t[...]

Side air bag system (if equipped) W ARNING: Do not place objects or mount equipment on or near the air bag cover on the side of the seatbacks of the front seats or in front seat areas that may come into contact with a deploying air bag. This is dangerous. In an accident, the object could interfere with the air bag inflation and injure the occupants[...]

W ARNING: Seating Position with Side Air Bags Sitting too close to the side air bag storage compartments or placing hands on them is extremely dangerous. A side air bag inflates with great force and speed directly out of the outboard shoulder of the front seat and expands along the front door on the side the car is hit. Serious injury could occur i[...]

W ARNING: All occupants of the vehicle including the driver should always wear their safety belts even when an air bag SRS is provided. How does the side air bag system work? The side air bag system consists of the following: • An inflatable nylon bag (air bag) with a gas generator concealed behind the outboard bolster of the driver and front pas[...]

near -frontal or opposite side collisions, unless the collision causes sufficient lateral deceleration. W ARNING: Several air bag system components get hot after inflation. Do not touch them after inflation. W ARNING: If the side air bag has deployed, the air bag will not function again. The side air bag system (including the seat) must be inspecte[...]

Disposal of air bags and air bag equipped vehicles For disposal of air bags or air bag equipped vehicles, see your authorized Mazda dealership. Air bags MUST BE disposed of by qualified personnel. W ARNING: Disposing of an air bag can be dangerous. Unless all safety procedures are followed, injury can result. Ask an Authorized Mazda Dealer how to s[...]

Follow all the important safety restraint and air bag precautions that apply to adult passengers in your vehicle. If the shoulder belt portion of a combination lap and shoulder belt can be positioned so it does not cross or rest in front of the child’ s face or neck, the child should wear the lap and shoulder belt. Moving the child closer to the [...]

SAFETY SEATS FOR CHILDREN Child and infant or child safety seats Use a safety seat that is recommended for the size and weight of the child. Carefully follow all of the manufacturer’ s instructions with the safety seat you put in your vehicle. If you do not install and use the safety seat properly , the child may be injured in a sudden stop or co[...]

• Put the safety belt in the automatic locking mode. Refer to Automatic locking mode (passenger side front seat). Mazda recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position which is capable of providing a tether anchorage. For more information on top tether straps, refer to Attac[...]

2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together . 3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer’ s instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the proper buckle (the b[...]

5. T o put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. 6. Allow the belt to retract. The belt will click as it retracts to indicate it is in the automatic locking mode. 7. Pull the lap belt portion across the child seat toward the buck[...]

Check to make sure the child seat is properly secured before each use. Attaching child safety seats with tether straps Most new forward-facing child safety seats include a tether strap which goes over the back of the seat and hooks to an anchoring point. T ether straps are available as an accessory for many older safety seats. Contact the manufactu[...]

3. Locate the correct anchor for the selected seating position. NOTE: There are three tether anchors located on the headliner at the rear of the vehicle. W ARNING: If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision. If the safety seat is not anchored properly , the risk of a c[...]

Attaching safety seats with LA TCH (Lower Anchors and T ethers for Children) attachments for child seat anchors Some child safety seats have two rigid or webbing mounted attachments that connect to two anchors at certain seating positions in your vehicle. When properly installed, this type of seat eliminates the need to use seat belts to attach the[...]

The lower anchors for child seat installation are located at the rear section of the rear seat between the cushion and seat back. Follow the child seat manufacturer’ s instructions to properly install a child seat with LA TCH attachments. W ARNING: Attach LA TCH lower attachments of the child seat only to the anchors shown. If you install a child[...]

STARTING Positions of the ignition 1. LOCK, locks the gearshift lever and allows key removal. 2. ACCESSORY , allows the electrical accessories such as the radio to operate while the engine is not running. 3. ON, all electrical circuits operational. W arning lights illuminated. Key position when driving. 4. ST ART , cranks the engine. Release the ke[...]

W ARNING: Do not start your vehicle in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine. See Guarding against exhaust fumes in this chapter for more instructions. W ARNING: If you smell exhaust fumes inside your vehicle, have your authorized Mazda dealer inspect your veh[...]

If starting a vehicle with a manual transmission: • Make sure the parking brake is set. • Push the clutch pedal to the floor . 3. T urn the key to 3 (ON) without turning the key to 4 (ST ART). Note: If there is difficulty in turning the key , firmly rotate the steering wheel left and right until the key turns freely . This condition may occur w[...]

Starting the engine Note: Whenever you start your vehicle, release the key as soon as the engine starts. Excessive cranking could damage the starter . 1. T urn the key to 4 (ST ART) without pressing the accelerator pedal and release as soon as the engine starts. The key will return to 3 (ON). 2. If the temperature is above –12°C (10°F) and the [...]

Guarding against exhaust fumes Although odorless and colorless, carbon monoxide is present in exhaust fumes. T ake precautions to avoid its dangerous effects. W ARNING: If you ever smell exhaust fumes of any kind inside your vehicle, have your authorized Mazda dealer inspect and fix your vehicle immediately . Do not drive if you smell exhaust fumes[...]

BRAKES Y our service brakes are self-adjusting. Refer to the service maintenance section for scheduled maintenance. Occasional brake noise is normal and often does not indicate a performance concern with the vehicle’ s brake system. In normal operation, automotive brake systems may emit occasional or intermittent squeal or groan noises when the b[...]

W ARNING: The Anti-Lock system does not decrease the time necessary to apply the brakes or always reduce stopping distance. Always leave enough room between your vehicle and the vehicle in front of you to stop. ABS warning lamp ABS (if equipped) The ABS warning lamp in the instrument cluster momentarily illuminates when the ignition is turned to th[...]

Parking brake Apply the parking brake whenever the vehicle is parked. T o set the parking brake, apply the brake pedal and pull the parking brake handle up as far as possible. The BRAKE warning lamp in the instrument cluster illuminates and remains illuminated (when the ignition is turned ON) until the parking brake is released. W ARNING: Always se[...]

STEERING Y our vehicle is equipped with power steering. Power steering uses energy from the engine to help steer the vehicle. T o prevent damage to the power steering pump: • Never hold the steering wheel to the extreme right or the extreme left for more than a few seconds when the engine is running. • Do not operate the vehicle with a low powe[...]

W ARNING: V ehicles with a higher center of gravity such as utility and four -wheel drive vehicles handle differently than vehicles with a lower center of gravity . Utility and four -wheel drive vehicles are not designed for cornering at speeds as high as passenger cars. A void sharp turns, excessive speed and abrupt maneuvers in these vehicles. Fa[...]

2. Locate the access cover plate to the brake-shift interlock override. It is located on the top of the steering column. 3. Insert a tool (or a screwdriver) into the right-hand side of the brake-shift interlock access cover and remove the cover . Driving 160[...]

4. Insert a tool (or screw driver) into the access hole to override the brake-shift interlock. Apply the brake and shift into Neutral while holding down the override tab. If it is necessary to use the above procedure to move the gearshift lever , it is possible that a fuse has blown or the vehicle’ s brakelamps are not operating properly . Refer [...]

Driving with an automatic overdrive transaxle Y our automatic transaxle electronically controls the shift feel by using an adaptive learning strategy . This feature is designed to optimize shift smoothness. NOTE: It is normal for your transaxle to shift firmly during the first few hundred kilometers (miles) of operation until the adaptive strategy [...]

R (Reverse) W ith the gearshift lever in R (Reverse), the vehicle will move backward. Y ou should always come to a complete stop before shifting into and out of R (Reverse). W ARNING: Make sure the rearward path of the vehicle is unobstructed before moving the vehicle in reverse. N (Neutral) W ith the gearshift lever in the N (Neutral) position, th[...]

If the O/D OFF indicator light is flashing on and off repeatedly when the vehicle is started or does not come on when the O/D OFF control is pressed, there may be a transaxle electronic system malfunction. Y ou should contact your authorized Mazda dealer as soon as possible or damage to the transaxle could occur . When to use D (Drive) or press the[...]

1 (First) Use 1 (First) for when added engine braking is desired when descending steep hills. The automatic transaxle will shift to the proper gear to ascend any grade without any need to shift to 1 (First). T o avoid damage to the engine and/or transaxle do not go faster than 56 km/h (35 mph) when in this gear . Y ou can upshift from 1 (First) to [...]

2. Hold down the brake pedal. 3. Depress the clutch pedal. 4. W ithout depressing the accelerator pedal, turn the ignition to position 4 (ST ART), release the ignition as soon as the engine starts. 5. Let the engine idle for a few seconds. 6. Release the brake pedal, then slowly release the clutch pedal while pressing down slowly on the accelerator[...]

Reverse Make sure that your vehicle is at a complete stop before you shift into R (Reverse). Failure to do so may damage the transaxle. Put the gearshift lever into the neutral position and wait at least three seconds before shifting into R (Reverse). NOTE: Y ou can shift into R (Reverse) only by moving the gearshift lever from left of 3 (Third) an[...]

2. Set the parking brake. 3. Shift into 1 (First). 4. T urn the ignition to position 1 (LOCK) to shut the engine off and remove the ignition key . W ARNING: Do not park your vehicle in Neutral, it may move unexpectedly and injure someone. Use 1 (First) gear and set the parking brake fully . 1 24 R 3 5 Driving 168[...]

FOUR WHEEL DRIVE (4X4) SYSTEM (IF EQUIPPED) 4x4 system general information W ARNING: For important information regarding safe operation of this type of vehicle, see Preparing to drive your vehicle in this chapter . Y our vehicle is equipped with a 4x4 system. This 4x4 system can use all four wheels to power the vehicle. This helps increase traction[...]

increase tire wear and may damage driveline components. The 4x4 ON mode is intended for use only on consistently slippery or loose surfaces. • If your vehicle is equipped with this 4x4 system, a spare tire of a different diameter than the road tires should never be used. Such a tire could result in damage to driveline components and make the vehi[...]

The differences that make your vehicle so versatile also make it handle differently than an ordinary passenger car . Maintain steering wheel control at all times, especially in rough terrain. Since sudden changes in terrain can result in abrupt steering wheel motion, make sure you grip the steering wheel from the outside. Do not grip the spokes. Dr[...]

Do not rock the vehicle for more than a few minutes or damage to the transmission and tires may occur or the engine may overheat. Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transaxle may occur . W ARNING: Do not spin the wheels at over 56 km/h (35 mph). The tires may fail and injure a passenger or [...]

Mud and water NOTE: • If you must drive through high water , drive slowly . T raction or brake capability may be limited. • When driving through water , determine the depth; avoid water higher than the bottom of the hubs (if possible) and proceed slowly . If the ignition system gets wet, the vehicle may stall. • Once through water , always tr[...]

“T read Lightly” is an educational program designed to increase public awareness of land-use regulations and responsibilities in our nations wilderness areas. Mazda joins the U.S. Forest Service and the Bureau of Land Management in encouraging you to help preserve our national forest and other public and private lands by “treading lightly .?[...]

Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating. Do not descend in neutral, disengage overdrive or manually shift to a lower gear . When descending a steep hill, avoid sudden hard braking as you could lose control. When you brake hard, the front wheels can’t turn and if[...]

“pump” the brakes. Refer to the Brakes section of this chapter for additional information on the operation of the anti-lock brake system. • Never drive with chains on the front tires of 4x4 vehicles without also putting them on the rear tires. This could cause the rear to slide and swing around during braking. Tires, Replacement Requirements [...]

Each day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires, and adjust if required. Check tire pressure with a tire gauge every few weeks (including spare). Safe operation requires tires that are neither underinflated nor overloaded. Periodically inspect the tire treads and remov[...]

and if the ignition system gets wet, your engine may stall. W ater may also enter your engine’ s air intake and severely damage your engine. If driving through deep or standing water is unavoidable, proceed very slowly . Never drive through water that is higher than the bottom of the hubs (for trucks) or the bottom of the wheel rims (for cars). O[...]

• Maximum T railer W eight Rating: Maximum weight of a trailer the vehicle is permitted to tow . The maximum trailer weight rating is determined by subtracting the vehicle curb weight for each engine/transmission combination, any required option weight for trailer towing and the weight of the driver from the GCWR for the towing vehicle. • Maxim[...]

W ARNING: Under no circumstance should these limitations be exceeded. Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury . Special loading instructions for owners of pickup trucks and utility-type vehicles W ARNING: For important information regarding safe operation of this type of ve[...]

Follow these guidelines to ensure safe towing procedure: • Stay within your vehicle’ s load limits. • Thoroughly prepare your vehicle for towing. Refer to Preparing to tow in this chapter . • Use extra caution when driving while trailer towing. Refer to Driving while you tow in this chapter . • Service your vehicle more frequently if you [...]

4x4 GCWR (Gross Combined W eight Rating)/T railer W eights Engine Maximum GCWR - kg (lbs.) T railer W eight Range - kg (lbs.) Maximum frontal area of trailer - m 2 (ft) 2 2.0L w/manual transmission 1,932 (4,260) 453 (1,000) 2.2 (24) 3.0L w/automatic transmission 2,477 (5,460) 907 (2,000) 2.2 (24) 3.0L w/automatic transmission and towing package 3,1[...]

Hitches Do not use hitches that clamp onto the vehicle bumper . Use a load carrying hitch. Y ou must distribute the load in your trailer so that 10% of the total weight of the trailer is on the tongue. Safety chains Always connect the trailer’ s safety chains to the frame or hook retainers of the vehicle hitch. T o connect the trailer’ s safety[...]

• Use a lower gear when towing up or down steep hills. This will eliminate excessive downshifting and upshifting for optimum fuel economy and transmission cooling. • Anticipate stops and brake gradually . Exceeding the GCWR rating may cause internal transmission damage and void your warranty coverage. Servicing after towing If you tow a trailer[...]

Replace the rear axle lubricant any time the axle has been submerged in water . Rear axle lubricant quantities are not to be checked or changed unless a leak is suspected or repair required. Disconnect the wiring to the trailer before backing the trailer into the water . Reconnect the wiring to the trailer after the trailer is removed from the wate[...]

CUSTOMER ASSISTANCE (EXCEPT PUERTO RICO) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicin[...]

CUSTOMER ASSISTANCE (PUERTO RICO) Y our complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer pers[...]

HAZARD FLASHER CONTROL Use only in an emergency to warn traffic of vehicle breakdown, approaching danger , etc. The hazard flashers can be operated when the ignition is off. • The hazard lights control is located on the instrument panel by the radio. • Depress hazard lights control to activate all hazard flashers simultaneously . • Depress co[...]

1. T urn the ignition to the LOCK/OFF position. 2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump shut-off switch by pushing in on the reset button. 4. T urn the ignition to the ON position. Pause for a few seconds and return the key to the LOCK/OFF position. 5. Make a further check for leaks in the fuel system[...]

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A T an T an — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Y ellow Y ellow Y ellow Blu[...]

The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 1 5A Canister V ent Control Solenoid 2 5A Blower Relay (coil), Rear Defrost Relay (coil), Pressure Switch to PCM 3 10A Rear Wiper Motor , Rear W asher Motor , Rear W iper Relay (coil) 4 10A Four Wheel Drive Control Module, Cluster (Restr[...]

Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 7 10A Passive Anti-theft T ransceiver (P A TS), Restraints Control Module 8 10A Cluster , Shift Lock Relay (coil), O/D signal to PCM 9 3A PCM Relay (coil), Fan Relay 1, 2, 3 (coil), A/C Relay (coil) 10 20A Front Wiper Motor , Front W asher Motor , INT Relay 11 10A IGN [...]

Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 24 15A Left/Right Stoplamps, High Mounted Stoplamp, Left/Right T railer Stoplamp, ABS Unit, ASC Unit (Brake Pedal Position Switch), PCM, Shift Solenoid 25 30A Power Window Motor - Right Front, Left Front, Right Rear , Left Rear 26 30A Power Door Lock Motor - Right Fron[...]

The high-current fuses are coded as follows. Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description Horn 15A Horn H/L LH 15A* Headlamp (High/Low Left, High Beams) H/L RH 15A* Headlamp (High/Low Right,, High Beams) EEC 5A* EEC (KPWR) HEGO 15A* HEGO 1,2, CMS 1,2, VMV FUEL 20A* Fuel Pump, EEC (FPM) DIODE — — MAIN 120A HEGO 15A ALT [...]

Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description DIODE — — H/L RELA Y MICRO — Headlamp (High/Low , Right/Left Relay) —— — INJ 30A** EEC (VPWR), EVR, MAF , IAC, Bulkhead MAIN 120A Main AL T 15A* Alternator/ Regulator (DRL) 15A* DRL Unit (feed), DRL Relay (DRLZ) (HEL V) 15A*(DRLZ) 10A(HLEV) Daytime Running Lamps (DRL[...]

Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description FUEL PUMP ISO — Fuel Pump Relay MAIN F AN ISO — Low Speed Fan Control Relay (2.0L Engine) High Speed Fan Control Relay 1 (3.0L Engine) ADD F AN ISO — High Speed Fan Control Relay 1 (2.0L Engine) Low Speed Fan Control Relay (3.0L Engine) DEF RELA Y ISO — Rear Defroster Re[...]

When driving with the temporary spare tire do not: • exceed 80 km/h (50 mph) under any circumstances • load the vehicle beyond maximum vehicle load rating listed on the Safety Compliance Label • tow a trailer • use tire chains • try to repair the temporary spare tire or remove it from its wheel • use the wheel for any other type of vehi[...]

Tire change procedure W ARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park) (automatic transaxle) or R (Reverse) (manual transaxle). W ARNING: T o prevent the vehicle from moving when you change a tire, be sure the parkin[...]

4. Lift the cargo cover and remove the tool bag with jack handle, lug nut wrench and long spare tire rod and spare tire from the wheel well. 5. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. Before placing the jack under the vehicle, NOTE the jack locations: • Front jackin[...]

• Rear jacking notches are located under the rear trailing arm. 6. Position the jack according to the following guides and turn the jack handle clockwise until the tire is a maximum of 25 mm (1 inch) off the ground. Never use the differentials as a jacking point. It is too easy for the vehicle to tilt or fall and you can be injured. W ARNING: T o[...]

8. Replace the flat tire with the spare tire, making sure the valve stem is facing outward. Reinstall lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. 9. Lower the wheel by turning the jack handle counterclockwise. 10. Remove the jack and fully tighten the lug nuts in the order sh[...]

NOTE: The cargo cover can not be reattached to the back seat clips when a full size tire is stowed. 13. Install cargo cover over the flat tire and secure with the plastic nut. 14. Unblock the wheels. JUMP STARTING YOUR VEHICLE W ARNING: The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could resu[...]

• Check all battery terminals and remove any excessive corrosion before you attach the battery cables. Ensure the vent caps are tight and level. • T urn the heater fan on in both vehicles to protect any electrical surges. T urn all other accessories off. Connecting the jumper cables 1. Connect the positive (+) booster cable to the positive (+) [...]

3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery . 4. Make the final connection of the negative (-) cable to an exposed metal part of the disabled vehicle’ s engine, away from the battery and the fuel injection system. NOTE: Do not use fuel lines, engine rocker covers or the intake manifold as grounding poin[...]

2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables. Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface. Note: In the[...]

3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’ s battery . 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’ s battery . After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle c[...]

WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or , if you are a member , your roadside assistance center . It is recommended that your vehicle be towed with a wheel lift and dollies or flatbed equipment. Do not tow with a slingbelt. Mazda Motor Corporation has not approved a slingbelt towing procedure.[...]

In case of a roadside emergency with a disabled vehicle (without access to wheel dollies, car hauling trailer , or flatbed transport vehicle) your vehicle (regardless of transmission powertrain configuration) can be flat towed (all wheels in the ground) under the following conditions: • Place the transmission in N (Neutral). • Maximum speed is [...]

CUSTOMER ASSISTANCE (U.S.A.) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda D[...]

CUSTOMER ASSISTANCE (CANADA) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. In our experience, any questions, problems or complaints regarding the operation of your Mazda or any other general service tran[...]

Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer’ s service facilities. personnel and equipment. W e urge you to follow the above three steps in sequence therefore for most effective results. MEDIATION/ARBITRATION PROGRAM Occasionally a customer concern cannot be resolved through Mazda?[...]

Provincial Administrators may be reached locally as listed below: Province/T erritory CAMV AP Number British Columbia & Y ukon T erritories (604) 681–0312 Alberta & Northwest T erritories (403) 426–0650 Saskatchewan (306) 352–9259 Manitoba (204) 942–7166 Ontario (416) 596–8824 Atlantic Canada (902) 422–5413 Quebec (418) 649–13[...]

CUSTOMER ASSISTANCE (PUERTO RICO) Y our complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer pers[...]

MAZDA IMPORTERS/DISTRIBUTORS U.S.A (Importer/Distributor) Mazda North American Operations 7755 Irvine Center Drive Irvine, CA 92618–2922 P .O. Box 19734 Irvine, CA 92623–9734 TEL: 1 (800) 222–5500 (in U.S.A.) (949) 727–1990 (outside U.S.A.) (Distributor in each area) CANADA Mazda Canada Inc. 305 Milner A venue, Suite 400 Scarborough, Ontari[...]

ADD-ON NON-GENUINE PARTS AND ACCESSORIES Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by the manufacturer for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle’ s performance or safety system; the manufact[...]

• Replacement Parts and Accessories Limited W arranty • T ire W arranty NOTE: Detailed warranty information is provided with your Mazda. OUTSIDE THE UNITED STATES AND CANADA Government regulations in the United States require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the Unite[...]

If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to: Mazda North American Operations 7755, Irvine Center Drive Irvine, California 92618–2922 P .O. Box 19734 Irvine, CA 92623–9734 Customer Assistance Center or toll free at 1 (800) 222–5500 If you live outside of the U.S.A., please contact the nearest[...]

IN CALIFORNIA (U.S. ONLY) California Civil Code Section 1793.2(d) requires that, if a manufacturer or its representative is unable to repair a motor vehicle to conform to the vehicle’ s applicable express warranty after a reasonable number of attempts, the manufacturer shall be required to either replace the vehicle with one substantially identic[...]

REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle has a defect that could cause a crash, or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying Mazda Corporation. If NHTSA receives similar complaints, it may open an investigation, and if [...]

W ASHING YOUR VEHICLE W ash your vehicle regularly with cold or lukewarm water . Never use strong detergents or soap. If your vehicle is particularly dirty , use a quality car wash detergent. Always use a clean sponge, washing glove or similar device and plenty of water for best results. T o avoid spots, avoid washing when the hood is still warm, i[...]

REPAIRING PAINT CHIPS Minor scratches or paint damage from road debris may be repaired with Genuine Mazda T ouch-Up Paint. Observe the application instructions on the products. Remove particles such as bird droppings, tree sap, insect remains, tar spots, road salt and industrial fallout immediately . CLEANING THE WHEELS W ash with the same detergen[...]

• 3.0L DOHC V6 — Duratec Engine • Cover the highlighted areas to prevent water damage when cleaning the engine. • Never wash or rinse the engine while it is running; water in the running engine may cause internal damage. CLEANING NON-PAINTED PLASTIC EXTERIOR PARTS Use vinyl cleaner for routine cleaning. Clean with a tar remover if necessary[...]

CLEANING THE WIPER BLADES, WINDSHIELD AND REAR WINDOW If the wiper blades do not wipe properly , clean the wiper blade rubber element with undiluted windshield washer solution or a mild detergent. T o avoid damaging the blades, do not use fuel, kerosene, paint thinner or other solvents. If the wiper still does not wipe properly , this could be caus[...]

CLEANING THE OVERHEAD CONSOLE Clean with a damp cloth, then wipe dry with a dry cloth. A void cleaner or polish that increases the gloss of the console. The dull finish in this area helps protect the driver from undesirable windshield reflection. CLEANING SEATS EQUIPPED WITH SIDE AIR BAGS Remove dust and loose dirt with a whisk broom or a vacuum cl[...]

INTRODUCTION Be extremely careful to prevent injury to yourself and others and damage to your vehicle when using this manual for inspection and maintenance. If you’re unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer . Factory-trained[...]

SCHEDULE 1 I : Inspect and repair , clean, adjust, or replace if necessary (Oil-permeated air filter cannot be cleaned using the air -blow method) R : Replace L : Lubricate Maintenance Item Maintenance Interval (Number of months or km (miles), whichever comes first) Months 6 12 18 24 30 36 42 48 54 60 66 72 x 1000 Km 12 24 36 48 60 72 84 96 108 120[...]

Maintenance Item Maintenance Interval (Number of months or km (miles), whichever comes first) Months 6 12 18 24 30 36 42 48 54 60 66 72 x 1000 Km 12 24 36 48 60 72 84 96 108 120 132 144 (x 1000 Miles) (7.5) (15) (22.5) (30) (37.5) (45) (52.5) (60) (67.5) (75) (82.5) (95) Engine coolant Replace at first 72,000 km (45,000 miles) or 36 months; after t[...]

SCHEDULE 2 I : Inspect and repair , clean, adjust, or replace if necessary (Oil-permeated air filter cannot be cleaned using the air -blow method) R : Replace L : Lubricate Maintenance Item Maintenance Interval (Number of months or km (miles), whichever comes first) Months 4 8 12 16 20 24 28 32 36 40 44 48 x 1000 Km 8 16 24 32 40 48 56 64 72 80 88 [...]

Maintenance Item Maintenance Interval (Number of months or km (miles), whichever comes first) Months 4 8 12 16 20 24 28 32 36 40 44 48 x 1000 Km 8 16 24 32 40 48 56 64 72 80 88 96 (x 1000 Miles) (5) (10) (15) (20) (25) (30) (35) (40) (45) (50) (55) (60) Engine coolant Replace at first 72,000 km (45,000 miles) or 36 months; after that, every 48,000 [...]

*1 According to state and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However , Mazda recommends that all maintenance services be performed at the recommended time or mileage (kilometrage) period to ensure long-term reliability . *2 If this component has been submerged in water , the o[...]

Working with the engine off • Automatic transmission: 1. Set the parking brake and ensure the gearshift is securely latched in P (Park). 2. T urn off the engine and remove the key . 3. Block the wheels to prevent the vehicle from moving unexpectedly . • Manual transmission: 1. Set the parking brake. 2. Depress the clutch and place the gearshift[...]

2. At the front of the vehicle, lift up on the auxiliary latch handle located in the center between the hood and the grille. 3. Lift the hood open and secure it with the prop rod. Maintenance and Specifications 232[...]

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.0L DOHC I4 Zetec engine 1. Power steering fluid reservoir 2. Engine coolant reservoir 3. Brake fluid reservoir 4. Air filter assembly 5. Power distribution box 6. Battery 7. Engine oil filler cap 8. Engine oil dipstick 9. W indshield washer fluid reservoir 5 6 7 8 1 2 3 4 9 Maintenance and Specific[...]

3.0L DOHC V6 Duratec engine 1. Power steering fluid reservoir 2. Engine coolant reservoir 3. Automatic transmission fluid dipstick 4. Brake fluid reservoir 5. Air filter assembly 6. Power distribution box 7. Battery 8. Engine oil dipstick 9. Engine oil filler cap 10. W indshield washer fluid reservoir 10 9 8 7 1 2 3 4 5 6 Maintenance and Specificat[...]

WINDSHIELD WASHER FLUID Checking and adding washer fluid Check the washer fluid whenever you stop for fuel. The reservoir is highlighted with a symbol. If the level is low , add enough fluid to fill the reservoir . In very cold weather , do not fill the reservoir all the way . Only use a washer fluid that meets Mazda specifications. Refer to Refill[...]

3. Set the parking brake and ensure the gearshift is securely latched in P (Park) (automatic transmissions) or 1 (First) (manual transmissions). 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil level indicator (dipstick). • 2.0L DOHC I4 Zetec engine • 3.0L DOHC V6 Duratec engine FULL ADD MAX MIN[...]

6. W ipe the indicator clean. Insert the indicator fully , then remove it again. • If the oil level is between the MIN-MAX or ADD-FULL marks, the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below the MIN or ADD mark, add enough oil to raise the level within the MIN–MAX or ADD-FULL range. • 2.0L DOHC I4 Zetec engine • 3.[...]

4. Install the indicator and ensure it is fully seated. 5. Fully install the engine oil filler cap by turning the filler cap clockwise 1/4 of a turn until it is seated. T o avoid possible oil loss, DO NOT operate the vehicle with the engine oil level indicator and/or the engine oil filler cap removed. Engine oil and filter recommendations SAE 5W -2[...]

BATTERY Y our vehicle is equipped with a Mazda maintenance-free battery which normally does not require additional water during its life of service. However , for severe usage or in high temperature climates, check the battery electrolyte level. Refer to the service maintenance section for the service interval schedules. Keep the electrolyte level [...]

W ARNING: When lifting a plastic-cased battery , excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and/or damage to the vehicle or battery . Lift the battery with a battery carrier or with your hands on opposite corners. W ARNING: Keep batteries out of reach of children. Batteries conta[...]

When the battery is disconnected or a new battery installed, the transmission must relearn its adaptive strategy . As a result of this, the transmission may shift firmly . This operation is considered normal and will not affect function or durability of the transmission. Over time the adaptive learning process will fully update transmission operati[...]

• an accurate temperature readout from the engine coolant gauge. When the engine is cold, check the level of the engine coolant in the reservoir . • The engine coolant should be at the “cold fill level” or within the “cold fill range” as listed on the engine coolant reservoir (depending upon application). • Refer to the Scheduled Main[...]

W ARNING: Do not put engine coolant in the windshield washer fluid container . If sprayed on the windshield, engine coolant could make it difficult to see through the windshield. The cooling system in your vehicle is filled with either green-colored or yellow-colored Mazda Premium Engine Coolant meeting Mazda Specifications. T o determine your vehi[...]

reservoir when the engine is cool. Add the proper mixture of coolant and water to the “cold full” level. For all other vehicles, which have a coolant degas system with a pressurized cap, or if it is necessary to remove the coolant pressure relief cap on the radiator of a vehicle with an overflow system, follow these steps to add engine coolant.[...]

If you have to add more than 1.0 liter (1.0 quart) of engine coolant per month, have your dealer check the engine cooling system. Y our cooling system may have a leak. Operating an engine with a low level of coolant can result in engine overheating and possible engine damage). Recycled engine coolant Not all coolant recycling processes produce cool[...]

• Decreased engine coolant concentrations below 40% will decrease the corrosion protection characteristics of the engine coolant and may cause engine damage. • Decreased engine coolant concentrations below 40% will decrease the freeze protection characteristics of the engine coolant and may cause engine damage. • Refer to the chart on the coo[...]

Observe the following guidelines when handling automotive fuel: W ARNING: Automotive fuels can be harmful or fatal if swallowed. Fuel such as gasoline is highly toxic and if swallowed can cause death or permanent injury . If fuel is swallowed, call a physician immediately , even if no symptoms are immediately apparent. The toxic effects of fuel may[...]

W ARNING: When refueling always shut the engine off and never allow sparks or open flames near the filler neck. Never smoke while refueling. Fuel vapor is extremely hazardous under certain conditions. Care should be taken to avoid inhaling excess fumes. W ARNING: The flow of fuel through a fuel pump nozzle can produce static electricity , which can[...]

Octane recommendations Y our vehicle is designed to use “Regular” unleaded gasoline with pump (R+M)/2 octane rating of 87. W e do not recommend the use of gasolines labeled as “Regular” that are sold with octane ratings of 86 or lower in high altitude areas. NOTE: Do not be concerned if your engine sometimes knocks lightly . However , if it[...]

Cleaner air Mazda endorses the use of reformulated “cleaner -burning” gasolines to improve air quality . Running out of fuel A void running out of fuel because this situation may have an adverse affect on powertrain components. If you have run out of fuel: • Y ou may need to cycle the ignition from OFF to ON several times after refueling, to [...]

W ARNING: The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the fuel filler cap. Otherwise, fuel may spray out and injure you or others. W ARNING: If you do not use the proper fuel filler cap, excessive pressure or vacuum in the fuel tank may[...]

The amount of usable fuel in the empty reserve varies and should not be relied upon to increase driving range. When refueling your vehicle after the fuel gauge indicates empty , you might not be able to refuel the full amount of the advertised capacity of the fuel tank due to the empty reserve still present in the tank. For consistent results when [...]

during summer and winter will show how temperature impacts fuel economy . In general, lower temperatures give lower fuel economy . Driving style — good driving and fuel economy habits Give consideration to the lists that follow and you may be able to change a number of variables and improve your fuel economy . Habits • Smooth, moderate operatio[...]

• Perform all regularly scheduled maintenance items. Follow the recommended maintenance schedule and owner maintenance checks found in your vehicle service maintenance section. Conditions • Heavily loading a vehicle or towing a trailer may reduce fuel economy at any speed. • Carrying unnecessary weight may reduce fuel economy (approximately 0[...]

• A void running out of fuel. • Do not turn off the ignition while your vehicle is moving, especially at high speeds. • Have the items listed in your service maintenance section performed according to the specified schedule. The scheduled maintenance items listed in the scheduled maintenance section are essential to the life and performance o[...]

description in the W arning lights and chimes section of the Instrument Cluster chapter . Y our vehicle may not pass the I/M test with the indicator on. If the vehicle’ s powertrain system or its battery has just been serviced, the on-board diagnostics system is reset to a “not ready for I/M test” condition. T o ready the on-board diagnostics[...]

4. Check the fluid level in the reservoir . It should be between the MIN and MAX lines. Do not add fluid if the level is in this range. 5. If the fluid is low , add fluid in small amounts, continuously checking the level until it reaches the range between the MIN and MAX lines. Be sure to put the cap back on the reservoir . BRAKE FLUID Checking and[...]

W ARNING: Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes with running water for 15 minutes. Seek medical attention if irritation persists. If taken internally , drink water and induce vomiting. Seek medical attention immediately . W ARNING: If you use DOT 5 or any other brake fluid that is not DOT 3 or DOT 4, you will cause perm[...]

5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If necessary , refer to Identifying components in the engine compartment in this chapter for the location of the dipstick. 6. Install the dipstick making sure it is fully seated in the filler tube. 7. Remove the dipstick and inspect the fluid level. The fluid should be in the [...]

If necessary , add fluid in 250 mL (1/2 pint) increments through the filler tube until the level is correct. If an overfill occurs, excess fluid should be removed by a qualified technician. An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. Checking and adding manual transmission fluid 1. [...]

W ARNING: Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes with running water for 15 minutes. Seek medical if irritation persists. If taken internally , drink water and induce vomiting. Seek medical attention immediately . AIR FILTER MAINTENANCE Refer to the service maintenance section for the appropriate intervals for changing th[...]

Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be voided for any damage to the engine if the correct air filter element is not used. INFORMA TION ABOUT UNIFORM TIRE QUALITY GRADING New vehicles are fitted with tires that have a rating on them called T ire Quality Grades. The Quality[...]

asphalt and concrete. A tire marked C may have poor traction performance. NOTE: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. T emperature A B C The temperature grades are A (the highest), B, and C, representing[...]

Tire rotation Because your vehicle’ s tires perform different jobs, they often wear differently . T o make sure your tires wear evenly and last longer , rotate them as indicated in the service maintenance section. If you notice that the tires wear unevenly , have them checked. • Four tire rotation • Five tire rotation Maintenance and Specific[...]

Replacing the tires Replace the tires when the wear band is visible through the tire treads. W ARNING: When replacing full size tires, never mix radial bias-belted, or bias-type tires. Use only the tire sizes that are listed on the Certification Label. Make sure that all tires are the same size, speed rating, and load-carrying capacity . Use only t[...]

USING SNOW TIRES AND TRACTION DEVICES NOTE: Snow tires must be the same size and grade as the tires you currently have on your vehicle. The tires on your vehicle have all-weather treads to provide traction in rain and snow . However , in some climates, using snow tires and traction devices may be necessary . If you need to use snow tires and chains[...]

REFILL CAPACITIES Fluid Classification Application Capacity Brake fluid High Performance DOT 3 Motor V ehicle Brake Fluid All Fill to line on reservoir Engine oil (including filter change) API service SJ, SAE 5W -20, 5W -30 Super Premium Motor Oil 2.0L I4 Zetec engine 4.25L (4.5 quarts) API service SH or SJ, SAE 5W -20, 5W -30, 10W -30, ACEA A1/B1 [...]

Fluid Classification Application Capacity Engine coolant 4 Mazda green-colored or yellow-colored Premium Engine Coolant 2.0L I4 Zetec engine with manual transaxle 5.0L (5.3 quarts) 3.0L V6 Duratec engine with automatic transaxle 10.0L (10.6 quarts) Rear axle lubricant SAE 80W -90 Premium Rear Axle Lubricant 4X4 1.4L (2.96 pints) 5 W indshield washe[...]

WHEEL AND TIRE SIZES V ehicle Grade Wheel T ire Spare Wheel Spare T ire DX/DX-V6 6.5JJx16 215/70R16 17x4T 135/90R17 LX-V6/ES-V6 7.0JJx16 235/70R16 17x4T 145/90R17 ENGINE SPECIFICA TIONS Engine 2.0L DOHC I4 Zetec engine 3.0L DOHC V6 Duratec engine Cubic inches 121 181 Required fuel 87 octane 87 octane Firing order 1-3-4-2 1-4-2-5-3-6 Spark plug gap [...]

3 2 1 5 4 Maintenance and Specifications 270[...]

IDENTIFYING YOUR VEHICLE Certification label The National Highway T raffic Safety Administration Regulations require that a Certification Label be affixed to a vehicle and prescribe where the Certification Label may be located. The Certification Label is located on the front door latch pillar on the driver’ s side. V ehicle identification number [...]

CELL PHONES Use of cell phones and other devices by driver: W ARNING: Although not Mazda products, use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the driver’ s hand[...]

A ABS (see Brakes) ..................... 155 Air bag supplemental restraint system ................................ 131, 136 and child safety seats ............ 133 description ......................131, 136 disposal ............................ 135, 140 driver air bag ..................133, 138 indicator light ........... 16, 135, 139 operation ..[...]

in rear seat .............................. 143 Cleaning your vehicle engine compartment .............. 221 exterior ............................ 221, 224 exterior lamps .........................222 instrument panel ....................223 interior ............................. 223–224 mirrors ..................................... 222 plastic par[...]

refill capacities ........................ 267 specifications ..........................269 Exhaust fumes .......................... 154 F Fluid capacities ......................... 267 Foglamps ..................................... 74 Four -Wheel Drive vehicles description .............................. 169 driving off road .......................[...]

Hood .......................................... 231 I Ignition ............................... 150, 269 Infant seats (see Safety seats) .....................142 Inspection/maintenance (I/M) testing ........................................255 Instrument panel cleaning ................................... 223 cluster ..................................[...]

Mirrors cleaning ................................... 222 fold away ...................................90 side view mirrors (power) .......89 Moon roof .................................... 94 Motorcraft parts ........................251 O Octane rating ............................ 249 Odometer ..................................... 22 Oil (see Engine[...]