Miele K 9757 ID-1 manual

Operating and installation instructions Refrigerator with PerfectFresh zone and dynamic cooling K 9457 iD (-1) K 9557 iD (-1) K 9757 iD (-1) To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 471 431 en - GB, HK[...]

Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 How to save en[...]

Adjusting the interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Moving the shelves ................................................2 3 Split shelf ........................................................2 3 Adjusting the condiment tray/bottle shelf ...............................2 4 Universal contain[...]

a Safety lock indicator light b On/Off button c Refrigerator temperature display d Temperature selector buttons (+ for warmer; – for colder) e Super cool button and indicator light f Alarm off button Guide to the appliance 4[...]

a Fan for dynamic cooling b Bottle rack c Adjustable shelves d PerfectFresh zone, dry compartment e PerfectFresh zone, humidity controlled compartments (or compartment, depending on model) f Butter and cheese compartment g Egg tray/Condiment tray h Interior lighting i Universal container* j Condensate channel and drain hole k Bottle shelf l Bottle [...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just thro[...]

This appliance complies with all relevant legal safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain imp[...]

Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. ~ This appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect[...]

~ Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. ~ This equipment may only be used in mobile installations such as ships, caravans, aircraft etc. if a risk assessment of the installation has been carried out by a suitably qualified engineer. ~ [...]

~ Do not use sharp edged objects to – remove frost and ice, – separate food which has become frozen. They will damage the evaporator, causing irreversible damage to the appliance. ~ Do not use defrosting sprays or de-icers, as they might contain substances which could damage the plastic parts or which could cause a build-up of gases and pose a [...]

Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven). Situated near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where t[...]

Before using for the first time The stainless steel trim to the interior shelves and the door shelves has a layer of protective foil to prevent scratching during transportation. ^ Do not remove this foil until the appliance has been built in. ^ Treat the stainless steel surfaces with a proprietary stainless steel conditioner immediately after remov[...]

Activating or de-activating the safety lock ^ Press and hold the Super cool button pressed in for approx. 5 seconds. The Super cool indicator light flashes, and a ; flashes in the temperature display. ^ Press the Super cool button again. ; will light up in the display. ^ You can now choose between ; 0 and ; 1 by pressing the temperature selector bu[...]

It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. The temperature in the appliance will rise:[...]

Approx. 5 seconds after letting go of the button, the current average temperature of the refrigerator is automatically shown. If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full , before checking the temperature display, as it will take this long for the [...]

Temperature display During normal operation, the temperature display on the control panel shows the average temperature in the refrigerator. If the temperature is not within the range that the appliance is able to display, bars will flash in the temperature display. Temperature display brightness The appliance is supplied with the brightness of the[...]

Your appliance has been fitted with an alarm to avoid energy being wasted if the door is left open and to prevent stored food becoming too warm. The alarm will sound if the door is left open for more than approx. 60 seconds. The alarm will stop as soon as the door is closed. If you want to keep the door open for more than approx. 60 seconds, intent[...]

Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink. ^ Press the Super cool button. The Super cool indicator li[...]

Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. This appliance has automatic dynamic cooling, which helps to keep an even tem[...]

Food which should not be stored in a refrigerator Not all food is suitable for refrigeration. This includes: – Fruit and vegetables which are sensitive to cold, such as bananas, avocado, papaya, passion fruit, aubergines, peppers, tomatoes and cucumbers – Fruit which is not yet ripe – Potatoes – Some hard cheeses, e.g. Parmesan When shoppin[...]

For every type of food, there are ideal storage conditions to ensure it stays fresh as long as possible, retaining both flavour and vitamins. The important factors for this are the storage temperature and the humidity. The correct combination of temperature and humidity is a unique feature of the PerfectFresh zone. Food can be stored for up to thre[...]

Always keep these foods covered or wrapped . Exception: Meat. The surface of the meat dries out slightly, helping to prevent the growth of bacteria, which results in the meat lasting longer. To prevent the risk of bacterial cross-contamination and meat deteriorating, do not let one type of meat come into direct contact with another type. Humidity-c[...]

Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level. The raised edge at the back must face upwards to prevent food from touching the back of the applia[...]

PerfectFresh zone compartments The compartments in the PerfectFresh zone are on telescopic rails, and can be removed for filling, emptying or cleaning purposes. ^ Pull out the compartment as far as it will go, and then lift it up and out. Push the runners back in again to avoid injury or damage. ^ Carefully pull out the lid between the compartments[...]

Universal container (depending on model) The universal container can be used both to store and serve food. It consists of a deep tray a and a shallow tray b . Both trays fit the stainless steel frame. If you wish to use the universal container to serve food, ^ place the shallow tray b in the stainless steel frame, and use the deep tray as a lid a .[...]

Refrigerator section and PerfectFresh zone The refrigerator section and the PerfectFresh zone defrost automatically. Condensate and frost can build up on the back wall of the refrigerator section and the PerfectFresh zone whilst in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the a[...]

Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents. "Non-abrasive" cleaning agents are also unsuitable as they can cause matt areas to appear. To help prevent re-soiling, treat stainless steel surfaces with a proprietary conditioning agent for stainless steel (available from [...]

^ Clean stainless steel surfaces with a suitable non-abrasive stainless steel cleaning agent following the manufacturer’s instructions on the packaging. ^ To help prevent re-soiling, a conditioning agent for stainless steel should always be used after cleaning. Follow the manufacturer’s instructions on the label. Ventilation gaps ^ The ventilat[...]

Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure that current is not supplied to the a[...]

. . . the interior light is not working. Has the refrigerator door been left open for too long? The lighting switches itself off automatically after approx. 15 minutes. If it also does not come on when the door is opened briefly, but the temperature display is working, then the light is defective. ^ Call the Service Department. The LED lighting may[...]

Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrr[...]

In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your applianc[...]

Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensur[...]

This appliance must be built in, otherwise it could tip up. Location This appliance should be installed in a dry, well-ventilated room. It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The room temperature should not go above or below the climate rang[...]

Ventilation Air at the back of the appliance gets warm. The appliance housing unit must be constructed to allow sufficient space for ventilation. A ventilation gap of at least 38 mm depth must be allowed for behind the appliance for air to circulate. The air inlet to the appliance is via the plinth in the housing unit. The cross-section of the air [...]

Stainless steel front (depending on model) The old door can be replaced by a stainless steel front if required. This is available from your dealer or the Miele Spare Parts Department. Installation 36[...]

Niche height [mm] A K 9457 iD (-1) 1220 - 1236 K 9557 iD (-1) 1397 - 1413 K 9757 iD (-1) 1772 - 1788 Building-in dimensions 37[...]

The door hinges are set ex-works to enable the door to be opened wide. However, if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommodate this. – For example, if the appliance door hits an adjacent wall when opened, the opening angle can be limited to 90°. ^ Place the locking pins supplied for [...]

Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below. To change the door hinging you will need the following tools : – a cross-slotted screwdriver, – a screwdriver, – a selection of Torx screwdrivers, – a spanner. Appliance door[...]

^ Unscrew mounting b and pull soft-close mechanism c downwards to remove it. ^ Undo ball joint d using a spanner and remove it. ^ Stand the appliance door up, and loosen the hinges at the front (the hinges remain open). ^ Remove screws a , and use the stoppers supplied c to plug the empty holes. Do not close up the hinges. Danger of inury. ^ Replac[...]

^ Push the appliance door onto the pre-fitted screws, and then tighten the screws. ^ Replace covers a , b and c . ^ Replace the locking pins into the top of the hinges to prevent the doors opening too far. Changing the door hinging 41[...]

All fitting instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. To install the appliance you will need the following : – a cross-slotted screwdriver, – a selection of Torx screwdrivers, – a hexagon spanner. Weight of the furni[...]

Preparing the appliance ^ Slide cover strip a into the holder in the middle of the appliance as illustrated with the bumps facing downwards. The bumps will fit into the keyhole slots. ^ Position the mains electricity cable so that the appliance can be connected easily once installed. ^ Push the appliance two-thirds of the way into its niche. When d[...]

^ Fit cover g onto fixing bracket h . ^ Secure fixing bracket h to the bottom of the appliance with screws i (M5 x 15). ^ Carefully remove the protective foil from sealing strip j . ^ Apply the sealing strip to the side of the appliance on which the door is opened so that it is flush with the front edge of the appliance. Fit the sealing strip so th[...]

On furniture with door fittings (e.g. stubs, seals etc) the dimension of these must be taken into account when making sure there is a gap all round of 42 mm . ^ Pull the appliance forwards by the dimension of the door fitting to keep the gap at 42 mm all round. The hinges and the covers will now protrude by the dimension of the door fitting. Tip: R[...]

^ Loosen screws b on the top and bottom fixing brackets c . ^ Press fixing bracket c against the side wall and tighten screws b . ^ Attach fixing bracket c to the housing unit side wall with screws d . Drill holes in the housing unit side walls if necessary. ^ Break off the protruding end of top cover e , turn the cover around and fit it on top fix[...]

^ Using a pencil, lightly mark a line down the centre of the inside of the furniture door. ^ Hang fixing bracket d with the fitting aids onto the inside of the furniture door. Align the fixing bracket centrally. ^ Attach the fixing bracket securely using at least 6 short chipboard screws e (4 x 14 mm). (On cassette doors only use 4 screws on the ed[...]

Securing the appliance door to the furniture door: ^ Screw fixing bracket a into the pre-drilled holes in the appliance door using hexagonal screw b . Make sure the two metal edges c are aligned (Symbol II ). ^ Drill fixing holes d in the furniture door, and screw i n4x1 4m m screws e . (On large or divided doors, attach a second pair of fixing bra[...]

^ Replace all the covers. To make sure the appliance is correctly fitted: – The door must close properly. – The door must not touch the furniture carcase. – The seal at the top edge of the handle side must fit properly. To double check place a torch in the appliance and close the doors. Turn the lights out in the room. If you can see any ligh[...]

50[...]

51[...]

Alteration rights reserved / 4209 K 9457 iD (-1), K 9557 iD (-1), K 9757 iD (-1) M.-Nr. 07 471 431 / 03[...]