NEC WT615 manual

Projector WT615/WT610 User ’ s Manual The WT615 projector is not distrib uted in the U .S.A or Canada.[...]

i Important Information Safety Cautions Precautions Please read this manual carefully bef ore using your NEC WT615/WT610 Projector and keep the manual handy for future ref erence. Y our serial number is located on the right side of your projector . Record it here: CA UTION To turn off main power , be sure to remo ve the plug from pow er outlet. The[...]

ii Important Information RF Interference (for USA only) W ARNING The F ederal Communications Commission does not allow an y modifications or changes to the unit EXCEPT those specified by NEC Solutions (America), Inc. in this manual. F ailure to comply with this government regulation could void your right to operate this equipment. This equipment ha[...]

iii Important Information Fire and Shock Pr ecautions 1. Ensure that there is sufficient v entilation and that vents are unobstructed to pre vent the b uild-up of heat inside y our projector . Allow at least 4 inches (10 cm) of space betw een your projector and a w all. 2. Pre vent f oreign objects such as paper clips and bits of paper from f allin[...]

iv Important Information Lamp Replacement •T o replace the lamp , follo w all instructions provided on page 134 . • Be sure to replace the lamp when the message “The lamp has reached the end of its usab le life. Please replace the lamp. ” appears. If y ou continue to use the lamp after the lamp has reached the end of its usable lif e, the l[...]

v T able of Contents Important Information ........................................................................... i 1. Introduction ...................................................................................... 1  What's in the Bo x? ...............................................................................................[...]

vi T able of Contents 4. Convenient Featur es ...................................................................... 50  Tu r ning Off the Image and Sound ............................................................................... 51  F reezing a Picture .....................................................................................[...]

1 1 Introduction  What's in the Bo x? ....................................................... 2  Introduction to the Projector ........................................ 3  P ar t Names of the Projector ........................................ 5 Opening and Closing the Mirror Cov er ......................................................[...]

2 1. Introduction  What's in the Box? Make sure y our box contains e v er ything listed. If any pieces are missing, contact your dealer . Please sav e the original box and pac king materials if you e ver need to ship y our Projector . Setup Guide NEC Network Setup Guide Important Information Projector Remote control (7N900501) Batteries (AA[...]

3 1. Introduction  Intr oduction to the Projector This section introduces y ou to the WT615/WT610 Projector and describes k ey f eatures and controls. Congratulations on Y our Pur chase of the WT615/WT610 Projector The WT615/WT610 is a sophisticated f our aspherical mirror XGA projector that produces an enhanced display . With the WT615/WT610 yo[...]

4 About this user's manual The f astest wa y to get star ted is to take y our time and do ev erything r ight the first time. T ake a f e w minutes now to re view the user's man ual. This ma y sav e you time later on. At the beginning of each section of the manual you'll find an ov er vie w . If the section doesn't apply , y ou c[...]

5 1. Introduction  Part Names of the Pr ojector * This security slot suppor ts the MicroSav er® Security System. MicroSav er® is a registered trademark of K ensington Microw are Inc. The logo is trademarked and o wned b y Kensington Micro ware Inc. U N L O C K M IR R O R L O C K V entilation (outlet) Mirror cov er Speaker Mirror cov er lock s [...]

6 1. Introduction Opening and Closing the Mirror Cover To open the mirror cover: 1. Slide the mirror cov er lock s witch to the unlock position. U NL O C K M I RR O R L O C K 1 2. Slo wly open the mirror cov er holding both ends. U N L O C K M I R R O R L O C K 2 NOTE: • Do not release your hold of the mirror cover until the mirror cover is fully[...]

7 1. Introduction T op Features 1. PO WER Button (ON / ST AND BY) Use this button to turn the pow er on and off when the main power is supplied and the projector is in standb y mode. NOTE: T o turn on the projector , press and hold this button for a minimum of two seconds. T o turn off the projector , press this button twice. 2. PO WER Indicator ( [...]

8 1. Introduction Te r minal Panel Features 1. COMPUTER IN / Component Input Connector (Mini D-Sub 15 Pin) Connect your computer or other analog RGB equip- ment such as IBM compatib le or Macintosh comput- ers. Use the supplied RGB/VGA signal cab le to con- nect to y our computer . This also serves as a compo- nent input connector that allows y ou [...]

9 1. Introduction Te r minal Panel Features PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I COMPUTER AUDIO IN AUDIO OUT PC CONTROL REMOTE IN USB 1 5 6 12 13 15 14 3 7 8 9 2 4 10 11 12. USB P ort (T ype B) Connect this por t to the USB por t (type A) of your PC using the supplied USB cable . Y ou can operate you[...]

10 1. Introduction 쐏 Part Names of the Remote Contr ol 1. Infrared T ransmitter/Laser P ointer Tr ansmits an infrared signal when any b utton other than LASER is pressed. Direct the remote control tow ard the remote sensor on the projector cabinet. Beams a laser light when the Laser button is pressed. CA UTION: * Do not look into the laser pointe[...]

11 1. Introduction 15. L-CLICK Button Wo r ks as the mouse left button when the supplied USB cable is connected with y our computer . VOLUME 3D REFORM PIC-MUTE FREEZE ZOOM FOCUS SLIDE AUTO ADJ. HELP VIEWER COMPUTER ASPECT VIDEO POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T R - C L I C K UP DOWN 16 21 22 20 25 28 18 19 17 23 24 2[...]

12 1. Introduction Battery Installation 1 Remov e the batter y cov er . NOTE: Do not pull the battery cover by force. Doing so can result in its complete removal. 2 Remov e both old batteries and install new ones (AAA). Ensure that you ha ve the batteries' po- larity (+/ –) aligned correctly . 3 Slip the cov er back o ver the bat- teries unt[...]

13  Part Names and Functions of the Supplied Electr onic Pen (WT615 only) The WT615 comes with an electronic pen. The electronic pen works as a USB mouse connected to the projector . See page 53 for connecting a USB mouse . The electronic pen and the projector’ s sensors can be used to con vert your whiteboard into a vir tual touchscreen which[...]

14 2 Installation and Connections  Setting Up the Screen and the Projector ................... 16  Making Connections .................................................. 19 When Viewing a D VI Digital Signal ....................................................................... 19 Connecting Y our PC or Macintosh Computer ....................[...]

15 2. Installation and Connections Y our projector is simple to set up and use. But bef ore you get star ted you m ust first: 1. Set up a screen and the pr ojector . NOTE: Using a warped screen can cause an image to appear distorted. 2. Connect your computer or video equipment to the pr ojector . See pa ge 19 to 28 . NOTE: T o connect a network, se[...]

16 2. Installation and Connections  Setting Up the Scr een and the Projector 1. Ref er to "Throw Distance (C)" in the diagr am and use a distance between the screen and projector that corre- sponds to the screen size . As an e xample, when projecting to a 60" screen, set the projector with a separ ation of approximately 10.4"[...]

17 2. Installation and Connections 40"-100" 90˚ Screens Suited • Screens with a soiled, scratched, or discolored area will not produce a clean image . Care should be used in the handling of the screen. Recommended Not recommended Recommended Not recommended Recommended Not recommended Not recommended Not optimal Not recommended Not rec[...]

18 2. Installation and Connections Ambient en vir onmental condition • Do not place the screen near v ents. Air mov ement hitting the screen, causing the projected image to ripple. • Do not illuminate the projector with strong light sources such as halogen lamp . Doing so can cause the object detection sensor to malfunction, resulting in the pr[...]

19 2. Installation and Connections PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I COMPUTER AUDIO IN AUDIO OUT PCCONTROL REMOTE IN USB PHONE PHONE DVI-I IN COMPUTER IN AUDIO IN COMPUTER AUDIO IN DVI-I  Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the no[...]

20 2. Installation and Connections To connect SCART output (RGB) Bef ore connecting: An e xclusive SCAR T adapter (ADP-SC1) and a commercially av ailable SCAR T cab le are re- quired f or this connection. NOTE: Audio signal is not available for this connection. PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I CO[...]

21 2. Installation and Connections PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I COMPUTER AUDIO IN AUDIO OUT PCCONTROL REMOTE IN USB COMPUTER IN DVI-I IN RGB/V GA signal cable (supplied) IBM PC or Compatib les (Notebook type) or Macintosh (Notebook type) IBM PC or Compatib les (Desktop type) or Macintosh (Des[...]

22 2. Installation and Connections PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I COMPUTER AUDIO IN AUDIO OUT PCCONTROL REMOTE IN USB MONITOR OUT Connecting an External Monitor RGB/V GA signal cable (commercially av ailab le or supplied with an external monitor) Y ou can connect a separate, e xternal monitor t[...]

23 2. Installation and Connections PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I COMPUTER AUDIO IN AUDIO OUT PCCONTROL REMOTE IN USB AUDIO IN LR AUDIO OUT L R Component YC b C r AUDIO IN COMPUTER COMPUTER IN Connecting Y our DVD Player A udio cab le (not supplied) D VD player Y ou can connect your projector t[...]

24 2. Installation and Connections AUDIO IN LR AUDIO OUT L R VIDEO OUT S-VIDEO VIDEO PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I COMPUTER AUDIO IN AUDIO OUT PCCONTROL REMOTE IN USB AUDIO IN VIDEO IN S-VIDEO IN Connecting Y our VCR or Laser Disc Player A udio equipment S-video cable (not supplied) Video cabl[...]

25 PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I COMPUTER AUDIO IN AUDIO OUT PCCONTROL REMOTE IN USB Connecting to a Network The WT615/WT610 comes standard with a PC Card slot which accepts a wired and wireless LAN card. Placing the optional wireless LAN card (NWL-100A/E) in the PC card slot of the projector [...]

26 (B) Example of wireless LAN connection (Network T ype → Mode: Infr astr ucture) 2. Installation and Connections Access P oint Wired LAN To make connection with a wired LAN via an access point, you need to select the Infr astructure mode. F rom the menu, select [Setup] → [Installation] → [LAN Mode] → “Profile” → “Adv anced” → [...]

27 2. Installation and Connections Inserting the PC Card 1. T urn off the main power switc h before inserting the PC card. (This step is needed onl y when the LAN card being inserted into the projector's PC CARD slot) 2. Hold the PC card horizontall y and insert it slowly into the PC card slot with its top facing up. The eject button pops out [...]

28 2. Installation and Connections PC Card T ype The PC Card slot accepts PCMCIA T ype II only . NOTE: The projector does not support NTFS formatted flash memory card. Be sure to use a flash memory card formatted with the F A T32, F A T16 or F A T file system. To format your flash memory card in your computer , refer to the document or help file th[...]

29 2. Installation and Connections Connecting the Supplied Power Cable Connect the supplied power cab le to the projector . First connect the supplied pow er cable's three-pin plug to the A C IN of the projector , and then connect the other plug of the supplied pow er cable in the wall outlet. Make sure that the prongs are fully inserted into [...]

30 3 Projecting an Image (Basic Operation)  Tu r ning on the Projector ............................................. 31  Adjusting the P osition and Size of the Projected Image (F ocus Adjustments) .............................................. 33  Selecting a Source .................................................... 40 쐏 Optimizing an[...]

31 POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T R - C L I C K UP DOWN POWER ENTER EXIT STATUS LAMP ON/ STAND BY AUTO ADJUST 3D REFORM 3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen.  T ur ning on the Pr ojector NOTE: • The projector has [...]

32 POWER ENTER SELECT EXIT STATUS LAMP ON/ STAND BY AUTO ADJUST 3D REFORM POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T R - C L I C K UP DOWN POWER ENTER EXIT STATUS LAMP ON/ STAND BY AUTO ADJUST 3D REFORM SELECT 3. Projecting an Image (Basic Operation) Note on Startup scr een (Menu Language Select screen) When you first turn on[...]

33 3. Projecting an Image (Basic Operation) 90˚ 1. Check whether the screen is set up to be vertical by vie wing it from the side.  Adjusting the Position and Size of the Pr ojected Image (Focus Adjustments) • After turning on the power , projected images ma y flick er for 3 to 5 min utes until the lamp lighting is stabilized. Also after turn[...]

34 3. Projecting an Image (Basic Operation) 3. Press the MENU b utton. The menu will be displa yed. 4. Press the FOCUS +/- buttons and align the f ocus of the projected image . MENU SOURCE FOCUS PC CARD SELECT FOCUS HELP ZOOM SLIDE VIEWER VOLUME 3D REFORM PIC-MUTE FREEZE R - C L I C K AUTO ADJ. COMPUTER ASPECT VIDEO Cabinet controls Remote control [...]

35 3. Projecting an Image (Basic Operation) 7. Adjust the height to keep the projector le vel by r otating the f eet on the fr ont and the rear . Tilting the projector will mov e the Tilt Indicator’ s slider to the left or r ight accordingly . Tilt the projector so that both of the sliders of “Back/F ront” and “Left/Right” are shown at th[...]

36 3. Projecting an Image (Basic Operation) 11. Press the FOCUS +/– buttons to align the f ocus of the pr ojected image again. • Repeat step 9 to 11 if the display image is not aligned with the screen. • On the WT615 you can use the electronic pen to help y ou set up the projector parallel to the screen. For more inf ormation, see "Setti[...]

37 3. Projecting an Image (Basic Operation) 3. T ouch the center of the mark lightly with the electronic pen. The [P arallel Detect] screen will be displa yed. T ouch When the marker is in the center of the gauge, go to Step 6 . When the marker is not in the center of the gauge, it means that the projector and the screen are not par allel to each o[...]

38 NOTE: • In terms of the optical characteristics of this projector , in addition to keystone distortion (page 102 ), there may be occurrences of slight pincushion type or barrel type distortion. To adjust the projected image with the screen, first perform Steps 9 to 11 on pages 35 to 36 (Adjustment of the projection distance → Height adjustme[...]

39 3. Projecting an Image (Basic Operation) [Symptom 3] As illustrated in the diagr am to the right, when the left edge of the image is wid- ened vertically , either the projector is not placed straight in front of the screen or the projector is directed slightly to the left. Conv ersely , when the right edge of the image is widened vertically , ei[...]

40 MENU SOURCE FOCUS PC CARD SELECT 3. Projecting an Image (Basic Operation)  Selecting a Sour ce Selecting the computer or video source Using the Remote Contr ol Press any one of the COMPUTER, VIDEO or VIEWER b uttons. Detecting the Signal A utomatically Press and hold the SOURCE button f or a minimum of 1 second, the projector will search f or[...]

41 HELP ZOOM FOCUS SLIDE VIEWER ASPECT VOLUME 3D REFORM PIC-MUTE FREEZE R - C L I C K AUTO ADJ. COMPUTER VIDEO HELP ZOOM FOCUS SLIDE VIEWER ASPECT VOLUME 3D REFORM PIC-MUTE FREEZE R - C L I C K AUTO ADJ. COMPUTER VIDEO POWER ENTER SELECT EXIT STATUS LAMP ON/ STAND BY AUTO ADJUST 3D REFORM 3. Projecting an Image (Basic Operation)  Optimizing an R[...]

42 3. Projecting an Image (Basic Operation) a a a a bb bb  Adjusting Pincushion or Barr el Distortion (Pincushion) If pincushion or barrel distor tion become conspicuous, adjust with [Pincushion]. Reference • Pincushion or barrel distortion in this projector The amount of pincushion and barrel distor tion in this projector is 2% or less (TV di[...]

43 3. Projecting an Image (Basic Operation) Screen (solid line) Projected area (dotted line) 2. Press the ENTER button when [Pincushion] is completed. Return to the menu. 3. Press the EXIT button a f ew times to make the menu disappear . NOTE: • In the [Pincushion] screen, when the [T op] adjustment value is "0", adjustment of [Bottom] [...]

44 3. Projecting an Image (Basic Operation) 쐆 Using the Laser Pointer Y ou can use the laser to draw y our audience's attention to a red dot that you can place on an y object. CA UTION: • Do not look into the laser pointer while it is on. • Do not point the laser beam at a person. • Do not allow c hildren to use the laser pointer . Pre[...]

45 3. Projecting an Image (Basic Operation)  Using the Electr onic Pen (WT615 only) The electronic pen and the projector’ s sensors can be used to con vert your whiteboard into a vir tual touchscreen which allows y ou to operate y our projector’ s menu or use the ChalkBoard f eature. Important • Be sure to set up the projector parallel to [...]

46 3. Press the SELECT 왖 or 왔 button to select [P en Calibration] and press the ENTER b utton. One “O ”mark will be displayed on the screen. 4. T ouch the circ le “O” mark lightly with the electr onic pen. Another “O” mark will be displa yed on the screen. Use the same procedure each time a cir c le "O" mark appears until [...]

47 3. Projecting an Image (Basic Operation) ChalkBoard Function Y ou can use the electronic pen to operate the ChalkBoard function. See also page 55 . NOTE: Hold the electronic pen upright against the screen when using it. Otherwise, the actual pen stroke may not be displayed on the screen. The electronic pen must be used at an angle less than 20 d[...]

48 POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T R - C L I C K UP DOWN  T ur ning of f the Projector To turn off the projector: 3. Projecting an Image (Basic Operation) 1. Press the PO WER (ON/ST AND BY) button on the pr ojector cabinet or the PO WER OFF button on the remote contr ol. The "P ower Off / Are y ou sure?&quo[...]

49 3. Projecting an Image (Basic Operation) 쐅 After Use Preparation: Make sure that the main po wer is turned off. 1. Close the mirror co ver . After closing the mirror cov er , lock the mirror co ver b y sliding the mirror cov er lock s witch to the lock position. U N L O C K M I R R O R L O C K 1 U N L O C K M IR R O R L O C K 2 2. Unplug the p[...]

50 4 Convenient Features  Tu r ning Off the Image and Sound .............................. 51 쐇 F reezing a Picture ...................................................... 51 쐋 Using the P ointer ....................................................... 51 쐏 Enlarging and Mo ving a Picture ................................. 52 쐄 Getting Inte[...]

51 POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T R - C L I C K UP DOWN POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T UP DOWN HELP ZOOM FOCUS SLIDE VIEWER ASPECT VOLUME 3D REFORM PIC-MUTE FREEZE R - C L I C K AUTO ADJ. COMPUTER VIDEO HELP ZOOM FOCUS SLIDE VIEWER ASPECT VOLUME 3D REFORM PIC-MUTE FREEZE R - C L [...]

52 POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T R - C L I C K UP DOWN POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T R - C L I C K UP DOWN POINTER LASER MAGNIFY PAGE OFF POWER ON E N T E R M E N U E X I T UP DOWN POINTER LASER MAGNIFY PAGE OFF POWER ON UP DOWN R - C L I C K E N T E R M E N U E X I T POINTER L[...]

53 4. Convenient Features 쐂 Using a USB Mouse Using a USB mouse giv es you a smooth operation. A commercially available USB mouse can be used. NOTE: There may be some brands of a USB mouse that the projector does not support. Operating the Menus using the USB mouse Mouse Cursor When connecting a USB mouse to the USB por t (T ype A) of the project[...]

54 4. Convenient Features 쐆 Using the Remote Mouse Function The built-in remote mouse function enab les y ou to operate your computer's mouse functions from the remote control. It is a great con venience f or clicking through y our computer-generated presentations . Connecting to your computer for the r emote mouse function If you wish to us[...]

55 4. Convenient Features  Making Fr eehand Drawings on a Projected Image (ChalkBoar d) The ChalkBoard feature allows you to write and draw messages on a projected image. NOTE: The ChalkBoard feature is available only when the supplied electronic pen (WT615 only) or a USB mouse is used. To display the ChalkBoard tool bar , click the middle butto[...]

56 4. Convenient Features  Storing Images Displayed on the Pr ojector on the PC car d or USB memory (Capture) The Capture f eatures allows y ou to capture an image from a source that is currently being display ed. The image is sav ed as JPEG in the PC card or USB memory . [Important] • USB memory devices are not av ailab le for the Capture fun[...]

57 4. Convenient Features 쐅 Pr eventing Unauthorized Use of the Projector Assigning a ke yword pre v ents the projector from being used by unauthorized individuals. Assigning a Keyword for the first time 1. Press the MENU b utton. The menu will be display ed. 2. Press the SELECT 왘 button to select the Setup submen u and press the ENTER button. [...]

58 4. Convenient Features 4. Press the SELECT 왔 button f our times to select “Security”. 5. Press the ENTER button to displa y the Security screen. 6. Press the SELECT 왔 button once to select the K eyw ord entry bo x and press the ENTER button. The Software keyboar d will be displayed.[...]

59 4. Convenient Features 7. Enter an alphanumeric keyw ord using the Software ke yboard For example, to enter “1234”, f ollow the steps 7-1 to 7-4 belo w . NOTE: • Please make a note of your keyword. • Do not use spaces (SP) in your keyword. 7-1. Select the n umber “1” and press the ENTER b utton. The asterisk “ 쏄 ” will be displ[...]

60 Checking If Security is enabled Tu rn off the projector and turn it back on to chec k if the Security function is enabled. 1. Press the PO WER (ON/ST AND BY) button. The "P ower Off / Are y ou sure?" message will appear . Press the ENTER button or the PO WER (ON/ST AND BY) or the POWER OFF button again. The lamp lights off and the POWE[...]

61 Disabling the Security 1. Press the MENU b utton. The on-screen menu will be displa yed. NOTE: Immediately after the projector has been turned on and the “Projector is locked! Enter your keyword.” message is displayed at the bottom of the screen, pressing the MENU button will display the Keyword entry page. At this time, pressing the MENU bu[...]

62 4. Convenient Features 쐈 Using a USB Memory Device or USB Memor y Car d Reader The projector is compatible with either a USB memory de vice (A USB memory device is supplied with the WT615) or USB memory card reader which supports the viewer and security features. [Important] When sa ving captured images to a USB memor y device on the WT615, be[...]

63 쐉 Operation Using an HTTP Browser Overview The use of HTTP server functions will allow control of the projector from a web bro wser without the installation of special software . Please be sure to use “Microsoft Internet Explorer 4.x” or a higher v ersion f or the web browser . (This de vice uses “J av aScript” and “Cookies” and th[...]

64 Structure of the HTTP Server Po wer: This controls the power of the projector . On ................... P o wer is switched on. Off ................... P o wer is s witched off. Picture: Controls the video adjustment of the projector . Brightness 왖 ... Increases the br ightness adjustment v alue. Brightness 왔 ... Decreases the br ightness adj[...]

65 4. Convenient Features Mute: This controls the m ute function of the projector . Picture On ....... Mutes the video. Picture Off ....... Cancels the video muting. Sound On ........ Mutes the audio. Sound Off ........ Cancels the audio muting. OSD On .......... Mutes the on-screen display . OSD Off .......... Cancels the muting of the on-screen d[...]

66 4. Convenient Features 씈 Using the Pr ojector to Operate a Computer Connected on a Network (Desktop Contr ol Utility 1.0) When Desktop Control Utility 1.0 on the included User Supportware 2 CD-ROM is installed on the computer , that computer can be operated using the projector o ver a netw or k. F or example , say y ou hav e a P ow erP oint fi[...]

67 Operations on the Computer 1. Connect the computer to the LAN and make the required settings. 2. Install Desktop Control Utility 1.0 on the computer . •F or instructions on installation, ref er to the included “Wired and Wireless Network Setup Guide”. •F or instructions on operating the software , see the Desktop Control Utility 1.0’ s[...]

68 Operations on the projector – Connecting to the computer 1. Make the LAN settings on the projector . Make the LAN settings at [Setup] → [Installation] → [LAN Mode] in the menu. (See page 111 ) 2. Connect a commerciall y av ailable USB mouse to the projector . (See page 53 ) 3. Clic k anywhere on the screen with the USB mouse. The menu appe[...]

69 9. Input the passwor d you made a note of in the pre vious Step [6] in “Operations on the Computer”. 10. Input the passwor d and click “OK”. The passw ord input window is turned off . 11. Click the PC searc h icon . The PC searc h window appears. 12. Click “OK”. The connection selection window appears. •T o search b y inputting the[...]

70 The f ollowing operations are a vailab le only with buttons on the projector cabinet or the remote control. 햲 Disconnect icon ................. Use to cut off communications with the computer . 햳 Shift icon ............................ Select this icon and press the ENTER button to set the shift lock mode. Select this icon and press the ENTE[...]

71 5 Using the V iewer  Making the Most out of the Viewer Function .............. 72  Operating the View er Function from the Projector (pla ybac k) ......................................... 73 쐋 Changing Bac kground Logo ...................................... 79[...]

72 5. Using the V iewer  Making the Most out of the V iewer Function Features Y ou can view presentation data, capture and pla y images on the projector . A PC card is used to view presentation data prepared on the computer and to capture and pla y images projected with the projector . The Vie wer f eature allows you to vie w slides stored on a [...]

73 5. Using the V iewer  Operating the V iewer Function from the Pr ojector (playback) This section describes the operation f or showing slides created using the Vie wer function with the projector . It is also possible to mak e slides directly from the images projected with the projector . Projecting slides (V iewer) Preparation: Use the Captur[...]

74 5. Using the V iewer 0000.jpg 0001.jpg 0002.jpg 3 Files Slot 1 _CAP_ _RESTORE RECYCLED 1/3 0000.jpg 60KB select : ENTER ? Cursor ..................................... Indicates the selected slide, folder or drive. List of folders .......................... Indicates folders contained on a PC card or USB memor y . Information ....................[...]

75 5. Using the V iewer Setting Option for V iewer Pla y Mode: Manual .................. Views a slide manually when the Viewer sour ce is selected. Auto ...................... Plays back slides automatically when the Viewer source is selected. Interval: Specifies interval time between 5 and 300 seconds . Star t: Specifies star t screen when the Vi[...]

76 Exiting Viewer To exit Vie wer , s witch to another input such as Computer , D VI (DIGIT AL/ANALOG), Video , S-Video or LAN. *T o s witch to another input, there are two wa ys: * Press the COMPUTER or VIDEO button on the remote control. * Press the MENU button on the remote control to displa y the Vie wer menu. Press the MENU button again to dis[...]

77 5. Using the V iewer Deleting Captured Images Using the Delete command on the Vie wer menu allo ws you to delete captured images. To delete captured images: Preparation: Make sure that the PC card is inser ted into the PC card slot or USB memor y into the USB por t of the projector . 1. Press the VIEWER button on the remote control to displa y a[...]

78 5. Using the V iewer To delete all the captured ima g es: 1. Repeat steps 1 to 3 in the above described pr ocedure. 2. Press the EXIT button to select the “__CAP__” folder in the directory (pane on the left). 0000.jpg 0001.jpg 0002.jpg 3 Files Slot 1 __CAP__ _RESTORE RECYCLED 1/3 0000.jpg 60KB select : ENTER folder : EXIT ? 3. Press the MENU[...]

79 5. Using the V iewer  Changing Backgr ound Logo Y ou can change the default bac kground logo using the Vie wer f eature. NOTE: File size must be 256KB or less. File formats other than JPEG, BMP , non-interlaced GIF or non-interlaced PNG are not available. Preparation: Use the Capture f eature to store JPEG or BMP files in a PC card inser ted [...]

80 6 Using On-Screen Menu  Using the Menus ........................................................ 81  Menu tree .................................................................. 82  Menu Elements .......................................................... 84  Menu Descriptions & Functions [Source] .................. 85  Menu De[...]

81  Using the Menus 1. Press the MENU b utton on the remote control or the pr ojector cabinet to display the menu. NOTE: The commands such as ENTER and EXIT in the gray bar show available buttons for your operation. 2. Press the SELECT 왗 or 왘 buttons on the remote contr ol or the projector cabinet to displa y the submenu. 3. Press the ENTER [...]

82  Menu tr ee Menu Item Source Computer , DVI (DIGIT AL), DVI (ANALOG), Video, S-Video, Viewer , LAN, T est Pattern, Entr y List Adjust Basic Brightness Contrast Color Hue Sharpness W all Color Off, Blackboard, Blackboard (Gray), Light yellow , Light green, Light blue, Sky blue, Light rose, Pink Aspect Ratio 4:3 4:3, Letterbox, Wide Screen, Cro[...]

83 6. Using On-Screen Menu Menu Item Setup Security Security Cabinet Button Unlock, Lock Password (Menu) Entry , Delete Password (Logo) Entry, Delete Security Enable, Disable, Keyword, Use Protect Key , Drive, Read, Register , Delete Installation Orientation Desktop Front, Ceiling Rear , Desktop Rear , Ceiling Front Screen Screen T ype: 4:3, 16:9 /[...]

84  Menu Elements Slider Solid triangle Highlight Ta b Radio button Check bo x Cancel button OK button Menu windows or dialog boxes typically have the following elements: Highlight ................ Indicates the selected menu or item. Solid triangle ......... Indicates further choices are available. A highlighted triangle indicates the item is a[...]

85 쐏 Menu Descriptions & Functions [Sour ce] Computer Selects the computer connected to y our Computer input connector signal. NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal. DVI (DIGIT AL/ANALOG) Selects the computer connected to the D VI input connector. V ideo Selects what is connected to [...]

86 Entry List Use the SELECT 왖 or 왔 b utton on your remote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet to displa y the Entry Edit Command screen. Entering the Currently Pr ojected Signal into the Entry List 1. Display the Entry List. 2. Use the SELECT 왖 or 왔[...]

87 Entry Edit Command Y ou can edit signals on the Entr y List. Load ...................... Enables you to select a signal from the list. Store ..................... Enables you to store the currently projected signal. Cut ........................ Enables you to remove a selected signal from the list and place it on the "clipboard" in the[...]

88 쐄 Menu Descriptions & Functions [Adjust] Basic [Brightness] Adjusts the brightness lev el or the back raster intensity . [Contrast] Adjusts the intensity of the image according to the incoming signal. [Color] Increases or decreases the color saturation le v el (not valid f or RGB and D VI digital). 6. Using On-Screen Menu[...]

89 [Hue] Va r ies the color lev el from +/- green to +/-blue . The red level is used as ref erence. This adjustment is only valid f or Video , Component and TV standard inputs (not v alid for RGB and D VI digital). [Sharpness] Controls the detail of the image f or Video (not valid f or RGB and D VI digital). Using the W all Color Correction [W all [...]

90 Selecting Aspect Ratio [Aspect Ratio] (not a vailable f or Viewer) Screen T ype 4:3 Screen T ype 16:9 Aspect Ratio allows y ou to select the best Aspect mode to displa y your source image. When screen type 4:3 is selected f or the source, the f ollowing selections will displa y: 4:3 ......................... Standard 4:3 aspect Letter Box ......[...]

91 Contr olling V olume [V olume] Y ou can adjust the volume le v el of the projector speakers and A UDIO OUT (Stereo Mini J ack). Reset To reset the settings for “Basic”, select “Reset” and press the ENTER b utton. The message "The setting v alues on page will be reset. Are y ou sure?” will be displa y ed. Select “Y es” and pres[...]

92 [Detail Settings] This will provide y ou with three pages of menus that provide more detailed settings . [P age1] Selecting Ref erence Setting [Reference] This f eature allows you to use color correction or gamma v alues as ref erence data to optimize f or v ar ious types of images. Y ou can select one of the f ollowing fiv e settings. Presentat[...]

93 Adjusting Color T emperature [Color T emper ature] This f eature adjusts the color temperature using the slider . NOTE: * When "Presentation" is selected in [Reference], this function is not available. * When [White Balance] settings has been changed, the color temperature value on screen does not reflect the real color temperature. Ad[...]

94 Selecting Signal T ype [Signal T ype] Select either the computer signal type or the component signal type. RGB ....................... Computer signal Component ............ Component signals such as Y/Cb/Cr , Y/Pb/Pr NOTE: This feature is available on the computer signal only . If you do not get a better picture even when you set "Signal S[...]

95 Image Options Adjusting Clock and Phase [Cloc k/Phase] This allows y ou to manually adjust Cloc k and Phase. Clock ..................... Use this item to fine tune the computer image or to remove any vertical banding that might appear . This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustmen[...]

96 Selecting Resolution [Resolution] This allows y ou to activate or deactiv ate the Adv anced AccuBlend feature . Auto ...................... T ur ns on the Advanced AccuBlend feature. The projector automatically reduces or enlarges the current image to fit the full screen. Native .................... T urns off the Advanced AccuBlend feature. The[...]

97 V ideo Selecting Noise Reduction Level [Noise Reduction] (not av ailable f or RGB , D VI digital, Vie wer and LAN; availab le for TV standard inputs) Select one of the three le vels f or reducing video noise: Low , Medium or High. NOTE: The lower the Noise Reduction level, the better the image quality by way of higher video bandwidth. Selecting [...]

98 쐂 Menu Descriptions & Functions [Setup] Basic P en Calibration (WT615 only) Calibrate so that pen touches are properly detected by the sensor on the WT615. Important Bef ore you use the electronic pen f or the first time or when y ou have changed the position of the projector or the screen size , be sure to use [P en Calibration] to calibr[...]

99 6. Using On-Screen Menu Use the 3D Ref or m f eature to correct (3D Reform correction) distor tion to mak e the top or bottom and the left or right side of the screen longer or shor ter so that the projected image is rectangular . Projected image 1. Press and hold the 3D REFORM button f or a minimum of 2 seconds to reset current adjustments. Cur[...]

100 6. Using On-Screen Menu Screen Screen 8. Press the ENTER button. Screen 9. Use the SELECT 왖왔왗 or 왘 button to select another icon whic h points in the direction. On the Cor nerstone adjustment screen, select “Exit” or press the EXIT b utton on the remote control. The confir mation screen is displa yed. 4. Press the 3D REFORM button o[...]

101 6. Using On-Screen Menu * The f ollowing are conditions under which the maximum angle is achie v ed: • Resolution is XGA Higher resolution than XGA narrows the adjustab le range. • Menu items should be set as f ollows: Aspect Ratio ........... 4:3 Screen T ype ............ 4:3 • Horizontal and V er tical are adjusted separately . A combin[...]

102 6. Using On-Screen Menu Selecting Ke ystone Mode [Ke ystone] This option allows y ou to correct ke ystone distor tion manually . Selecting this item will displa y the K eystone adjustment screen. 1. Press the SELECT 왗왘 button to adjust the horizontal ke ystone . 2. Press the SELECT 왖왔 button to select "V er tical". 3. Press th[...]

103 6. Using On-Screen Menu Setting Lamp Mode to Normal or Eco [Lamp Mode] This f eature enables y ou to select two brightness modes of the lamp: Nor mal and Eco modes. The lamp life can be e xtended up to 4000 hours by using the Eco mode . Selecting Eco mode decreases f an noise compared to in Normal mode. Normal Mode ........ This is the default [...]

104 Menu Selecting Menu Color [Men u Color Select] Y ou can choose a color f or the menu. T urning On / Off Sour ce Display and Message [Displa y Select] Source ................... This option turns on or off input name display such as Computer , DVI (DIGIT AL/ANALOG), Video, and No Input to be displayed in the top right corner of the screen. Messa[...]

105 Selecting Menu Displa y Time [Menu Displa y Time] This option allows y ou to select how long the projector w aits after the last touch of a button to turn off the menu. The preset choices are "Manual", "A uto 5 sec", "A uto 15 sec", and "Auto 45 sec". The "Auto 45 sec" is the f actory preset. NO[...]

106 Setting a P assw ord [P assw ord (Menu)] / [P asswor d (Logo)] A pass word can be set f or your projector to a void operation b y an unauthorized person. When [P ass word (Menu)] is set, changing the menu from Basic to Adv anced will displa y [P assword (Men u)] input screen. When [P assw ord (Logo)] is set, doing any one of the f ollowing tw o[...]

107 Security The Security function enables y ou to protect your projector so that the projector will not project a signal unless y ou enter a ke yword. There is also an option to loc k the projector b y using a registered PC card* as a protect ke y . Once you hav e registered your PC card as a protect k ey , you are required to inser t the register[...]

108 The Security function takes eff ect. To register a PC card as a protect key . 1. Insert a PC card into the PC card slot of the pr ojector . 2. Use the SELECT 왖 or 왔 button to select "Use Pr otect Key" and press the ENTER b utton. 3. Use the SELECT 왖 or 왔 button to select "Read" and press the ENTER b utton. Data of th[...]

109 To tur n on the projector when Security is enabled (when using PC card as a protect ke y). 1. Insert your registered PC card into the PC car d slot. 2. Press and hold the PO WER button f or a minim um of two seconds. The projector will turn on and then recognize the PC car d. Once the image has been projected, it will stay on without the PC car[...]

110 Installation Selecting Projector Orientation [Orientation] This reorients your image f or your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. Selecting Aspect Ratio and P osition f or Screen [Screen] Screen T ype ........... Select one of three optio[...]

111 [LAN Mode] Setting LAN Mode This f eature allows y ou to set various setting items when the projector is used on your netw or k. CA UTION • Consult with your netw or k administrator about these settings . •F or wired LAN connection, use a commercially av ailable wired LAN card and a LAN cab le (Ethernet cable). For more inf ormation on supp[...]

112 To select a wireless LAN access point: 1. On the "Profile" tab, select "Profiles" and then select "Pr ofile 1" or "Pr ofile 2". 2. On the "Profile" tab, select "Adv anced” and press the ENTER button. 3. On the Advanced menu, select "Network T ype" → "Site Survey" and[...]

113 6. Using On-Screen Menu Pr ofile Profiles (f or PC Card): To ex ecute a wireless LAN easily using Image Express Utility 2.0, select “Easy Connection. Up to two settings f or the optional wireless LAN card can be stored in memory of the projector. Select "Profile 1" or "Profile 2" and then do settings f or "DHCP" [...]

114 6. Using On-Screen Menu Adv anced menu Netw ork T ype (required for wireless onl y) Site Survey: Displa ys a list of av ailable SSIDs f or wireless LAN on site. Select an SSID which you can access. To select an SSID , highlight the SSID and use the SELECT 왘 to select “OK” and press the ENTER b utton. : access point : Ad Hoc PC : WEP enabl[...]

115 WEP (required f or wireless only) Select this option whether using the WEP (Wired Equiv alent Privacy) ke y f or encr yption or not. T o use encr yption, specify WEP ke y . Disable .................. Will not turn on the encryption feature. Y our communications may be monitored by someone. 64bit ...................... Uses 64-bit datalength for[...]

116 Using Software Ke yboard to enter an encryption ke y 1. Select one of Key 1, K ey 2, Ke y 3 and Key 4 and press the ENTER b utton. The software keyboar d will be display ed. 2. Use the SELECT 왖왔왗 or 왘 button to select one ke y and press the ENTER button. 3. After finishing entering the WEP ke y , use the SELECT 왖왔왗 or 왘 button t[...]

117 Mail Aler t Mail: Checking this bo x enab les Aler t Mail feature . This option notifies y our computer of an error message via e-mail when using wireless or wired LAN. The error message will be noticed when the projector lamp has reached the end of its usable lif e or an error occurs in the projector . Sample of a message sent from the project[...]

118 Specifying a Name for Y our Projector [Projector Name] Specify a unique projector name. Press to display the softw are ke yboard and type in. Up to 16 alphanumeric characters can be used. After enter ing a name, select “OK” and press the ENTER button. Using Software Ke yboard 1 to 0 and Characters ....... Use to type in password or keyword.[...]

119 6. Using On-Screen Menu Selecting P ower -saving in Standb y Mode The projector has two standb y modes: Normal and P ower-sa ving. Po wer-sa ving mode is the mode that allows you to put the projector in the po wer-saving condition which consumes less power than the Normal mode. The projector is preset f or Normal mode at the f actor y . NOTE: ?[...]

120 Options Setting A uto Adjust [A uto Adjust] This f eature sets the Auto Adjust mode so that the RGB image can be automatically or man ually adjusted for noise and stability . Y ou can automatically make adjustment in tw o wa ys: Normal and Fine. Off ......................... The RGB image will not be automatically adjusted. Y ou can manually op[...]

121 Enabling High Speed F an Mode [Fan Mode] This option allows y ou to select two modes f or fan speed: Auto mode and High speed mode. Auto ...................... The built-in fans automatically run at a variable speed according to the internal temperature. High ...................... The built-in fans run at high speed. When you wish to cool do w[...]

122 Selecting Signal Format [Signal Select] Computer Allows y ou to set "Computer" to automatically detect an incoming RGB or component source such as a computer or D VD player . Howe v er there may be some RGB and component signals that the projector is unable to detect. In this case, select "RGB" or "Component". Sele[...]

123 T ools Selecting the ChalkBoar d [ChalkBoard] This option displa ys the ChalkBoard tool bar . The ChalkBoard function can also be used with the electronic pen on WT615. See page 47 . Selecting Boar d Color [Board Color] This option allows y ou to select a board color of ChalkBoard. 6. Using On-Screen Menu[...]

124 6. Using On-Screen Menu NOTE: • The “Horizontal/Vertical Position” option can be adjusted within a range of 100%. Adjustab le zoom area Movab le area of displa yed image 100 % 100 % 80 % 80 % 100 % 100 % • When any adjustment is made to the “Cornerstone” or “Keystone” option, the “Digital Zoom” option is not available. * The[...]

125 Using Off Timer [Off Timer] 1. Select your desired time between 30 min utes and 16 hours: Off , 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00. 2. Select “OK” and press the ENTER button on the remote control. 3. The remaining time starts counting down. 4. The projector will turn off after the countdo wn is complete. NOTE: •T o cancel the pres[...]

126 Setting Closed Caption [Closed Caption] This option sets se ver al closed caption modes that allows te xt to be superimposed on the projected image. Caption 1-4 ........... T ext is superimposed. T ext 1-4 ................. T ext is displayed in full screen. Off ......................... This exits the closed caption mode. 쐆 Menu Descriptions[...]

127 Usage Time Remaining Lamp Time (%) Lamp Hour Meter (H) Projector Usage (H) NOTE: The progress indicator shows the percentage of r emaining lamp life. The value informs you of the amount of lamp and projector usage respectively . Sour ce Page1 Input T erminal Signal T ype Video T ype Source Name Entry No. Sour ce Page2 Horizontal F requency V er[...]

128 LAN Profile This page shows inf ormation on settings for a LAN card. IP Address ............. Indicates the IP address of the projector when a LAN card is used. Subnet Mask ......... Indicates the subnet mask of the projector when a LAN card is used. Gateway ................ Indicates the gateway of the network connected to the projector when a[...]

129 6. Using On-Screen Menu V ersion Firmware Data 쐊 Menu Descriptions & Functions [Reset] Returning to Factor y Default The Reset f eature allows you to change adjustments and settings to the f actory preset for sources b y the follo wing methods: [Current Signal] Resets the adjustments f or the current signal to the factory preset le vels. [...]

130 6. Using On-Screen Menu Clearing Lamp Hour Meter [Clear Lamp Hour Meter] Resets the lamp cloc k back to zero . NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 4100 hours in Eco mode) of service. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press the "HELP" butt[...]

131 7 Maintenance  Handling and Care of Mirror Surf ace ...................... 132  Cleaning the Cabinet .............................................. 133 쐋 Replacing the Lamp ................................................ 134[...]

132 7. Maintenance This section describes the simple maintenance procedures you should f ollow to replace the lamp , and to clean the cabinet and the mirror . P O W E R E N T E E R M E N U S O U R C E FO C U S P C C A R D E X IT S T A T U S L A M P O N / S T A N D B Y A U T O A D J U S T 3 D R E F O R M S E L E C T U N LO C K M IR R O R L O C K P C[...]

133 7. Maintenance * The projector has a sensor which detects an object in front of the largest mirror or in the light path. If the sensor detects any object, the projector will not turn on. If this happens while the projector is turned on, the image is m uted. In either case the ST A TUS indicator flashes in red. * The projector has a temperature [...]

134 7. Maintenance  Replacing the Lamp After your lamp has been operating f or 2000 hours (up to 4000 hours : Eco mode) or longer, the "Lamp" indicator in the cabinet will blink red and the message will appear . Even though the lamp ma y still be working, replace it at 2000 hours (up to 4000 hours : Eco mode) to maintain optimal projec[...]

135 7. Maintenance 3. Remove the lamp housing b y pulling out the handle. NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock. 4. Insert a new lamp housing until the lamp housing is plugged into the soc ket. CA UTION Do not use a lamp other than the NEC replacement lamp (WT61[...]

136 7. Maintenance 6. Reattach the lamp co ver . 7. Tighten the lamp cover scre w . Be sure to tighten the screw . 8. After you install a ne w lamp, select the menu [Reset] → [Clear Lamp Hour Meter] to c lear the Remaining Lamp Time and the Lamp Hour Meter . NOTE: When the lamp exceeds 2100 hours (up to 4100 hours in Eco mode) of service, the pro[...]

137 8 Appendix  T roubleshooting ...................................................... 138  Specifications ......................................................... 142  Cabinet Dimensions ............................................... 144  Pin Assignments of D-Sub COMPUTER Input Connector .............................................[...]

138 8. Appendix  T r oubleshooting This section helps you resolv e prob lems you ma y encounter while setting up or using the projector . Indicator Messages POWER Indicator Indicator Condition Projector Condition Note Off Blinking light Steady light Green Orange Green Orange 0.5 sec On, 0.5 sec Off 2.5 sec On, 0.5 sec Off 0.5 sec On, 0.5 sec Off[...]

139 8. Appendix Common Problems & Solutions (See also "P ower/Status/Lamp Indicator" on page 138 .) Does not turn on Will turn off No picture Color tone or hue is unusual Image isn’t square to the screen Picture is blurred Image is scrolling vertically , horizontally or both Remote control does not work Indicator is lit or blinking [...]

140 8. Appendix Ver tical stripes in RGB mode USB mouse does not work Electronic pen does not work (WT615 only) • Press the AUTO ADJUST button on the projector cabinet or the AUTO ADJ. button on the remote control. See page 41 . • Adjust the computer image manually with the “Clock”/“Phase” in “Adjust” → “Image Options”. See pa[...]

141 8. Appendix If there is no picture, or the picture is not display ed correctly . • Power on process for the projector and the PC. Be sure to connect the RGB cab le between the projector and the computer before turning on the computer . There are some notebook PCs, which do not output signal unless there is a projector or monitor connected fir[...]

142 8. Appendix  Specifications This section provides technical inf ormation about the WT615/WT610 DLP™ Projector's performance. Model Number WT615/WT610 Optical DMD™ 0.7" Single Chip Digital Micromirror De vice (DMD™), aspect ratio 4:3 Resolution 1024 ⳯ 768 pix els* up to UXGA with Adv anced AccuBlend Mirror Aspherical mirror [...]

143 8. Appendix Mechanical Installation Orientation: Desktop/F ront, Desktop/Rear , Ceiling/F ront, Ceiling/Rear Dimensions 15.0" (W) ⳯ 12.5" (H) ⳯ 12.3" (D) (with the mirror co ver open) 15.0" (W) ⳯ 8.9" (H) ⳯ 11.7" (D) (with the mirror cov er closed) 380 mm (W) ⳯ 318 mm (H) ⳯ 313 mm (D) (with the mirror c[...]

144 8. Appendix  Cabinet Dimensions Unit: mm (inch) POWER ENTER MENU SOURCE FOCUS PC CARD SELECT EXIT STATUS LAMP ON/ STAND BY AUTO ADJUST 3D REFORM 380 (15.0) 313 (12.3) 318 (12.5) 296 (11.7) 227 (8.9) 10.6 (0.42) UNLOCK MIRROR LOCK PC CARD AUDIO IN R L /MONO VIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUT DVI-I RGB AUDIO IN USB AUDIO OUT [...]

145 Mini D-Sub 15 Pin Connector  Pin Assignments of D-Sub COMPUTER Input Connector Signal Le vel Video signal : 0.7Vp-p (Analog) Sync signal : TTL le v el 11 12 13 14 15 67 89 1 0 12 345 8. Appendix Pin No. RGB Signal (Analog) YCbCr Signal 1R e d C r 2 Green or Sync on Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Ground Y G[...]

146 8. Appendix  Compatible Input Signal List Signal Resolution F requency H. Refresh Rate Dot Clock ( Dots ) ( kHz ) ( Hz ) ( MHz ) #: Images in abo ve flagged with # are compressed with Adv anced AccuBlend. D: Images abov e flagged with “D” are suppor ted by digital signal. NOTE: Some composite sync signals may not be displayed correctly .[...]

147 8. Appendix Cable Connection Communication Protocol Baud rate ........................................ 38400 bps Data length ..................................... 8 bits Parity .............................................. No parity Stop bit .......................................... One bit X on/off .......................................... [...]

148 8. Appendix  Using Softwar e Keyboard 1 to 0 and Characters .............................. Use to type in password or keyword. MODE .................... Selects one of three modes for alphabet and special characters. SP ......................... Inserts a space BS ......................... Deletes one character backward 왗 .................[...]

149 No image is displayed from your PC or video equipment to the projector . Still no image even though you connect the projector to the PC first, then start the PC. Enabling your notebook PC’ s signal output to the projector . •A combination of function keys will enable/disable the ex- ternal display . Usually , the combination of the “Fn”[...]

150 In the space below please describe your problem in detail. Information on application and environment where your projector is used Pr ojector Model number: Serial No.: Date of pur chase: Lamp operating time (hours): Lamp Mode: 䡺 Normal 䡺 Eco Information on input signal: Horizontal synch frequency [ ] kHz Ve rtical synch frequency [ ] Hz Syn[...]

NEC SOLUTIONS’ PROJECTOR PRODUCTS NEC Solutions (America), Inc. (hereafter NEC Solutions) warrants this product to be free from defects in material and workmanship under the following terms. HOW LONG IS THE W ARRANTY NEC Solutions’ WT610 projector is covered by a two (2) year limited parts and labor warranty from the date of the first cus- tome[...]

DECLARA TION OF CONFORMITY U.S. Responsible Party: Address: Tel. No.: NEC Solutions (America), Inc. 1250 N. Arlington Heights Road Itasca, Illinois 60143 (630) 467-5000 Type of Product: Equipment Classification: Models: Projector Class B Peripheral WT610 W e her eby declar e that the equipment specified abo ve conforms to the technical standar ds a[...]