Nilfisk-ALTO 05221F manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Nilfisk-ALTO 05221F, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Nilfisk-ALTO 05221F one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Nilfisk-ALTO 05221F. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Nilfisk-ALTO 05221F should contain:
- informations concerning technical data of Nilfisk-ALTO 05221F
- name of the manufacturer and a year of construction of the Nilfisk-ALTO 05221F item
- rules of operation, control and maintenance of the Nilfisk-ALTO 05221F item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Nilfisk-ALTO 05221F alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Nilfisk-ALTO 05221F, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Nilfisk-ALTO service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Nilfisk-ALTO 05221F.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Nilfisk-ALTO 05221F item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    Form No. 70935A 1 1/07, Revised 12/09 Printed in the U.S.A. SCRUBTEC 770 S SCRUBTEC 770 L SCRUBTEC 784 S SCRUBTEC 784 L SCRUBTEC 795 S SCRUBTEC 795 L U.S. Patent No. 6,760,947; No. 6,105,192; No. RE39,581 (Deluxe Machines) Operator's Manual MODELS: 05210F , 05210G, 0521 1F , 05220F , 05220G, 05221F 05230F , 05231F READ THIS MANUAL English (2-3[...]

  • Page 2

    -2- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Nil fi sk AL TO machine could result in injury to you or to[...]

  • Page 3

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 3 - OPERA T OR SAFETY INSTRUCTIONS DANGER! Failure to read and observe all DANGER statements could result in severe bodily injury or death. Read and observe all DANGER statements found in your Owner ’s Manual and on your machine. W ARNING! Failure to read and obs[...]

  • Page 4

    -4- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 OPERA T OR SAFETY INSTRUCTIONS W ARNING! Electrical components of this machine can “short-out” if exposed to water or moisture. Keep the electrical components of the machine dry . Wipe the machine down after each use. For storage, keep the machine in a dry bu[...]

  • Page 5

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 5 - INTRODUCTION Nil fi sk AL TO’ s newly designed Scrubtec 795, 784 & 770 automatic scrubbers are ef fi cient and superior fl oor cleaning machines. The Scrubtec 795 uses two brushes or pads to scrub a path 97 cm wide. The Scrubtec 784 uses two brushes or[...]

  • Page 6

    -6- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 SPECIFICA TIONS: Model Scrubtec 795L Scrubtec 784L Scrubtec 770L Model Number 05231F 05221F 0521 1F Motor , V ac 1 HP (.74kw) three 1HP (.74kw) three 1HP (.74kw) three stage tangential stage tagential stage tagential discharge discharge discharge Power Supply 36 [...]

  • Page 7

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 7 - PROCEDURES FOR TRANSPORTING How T o Put The Machine In A V an Or T ruck W ARNING: The machine is heavy . Make sure you use two able persons to assist the machine in climbing the ramp. 1. Make sure the loading ramp is at least eight (8) feet long, and strong eno[...]

  • Page 8

    -8- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 SYMBOLS USED ON SCRUBTEC 770, 784, 795 SYMBOLS USED ON SCRUBTEC 770S, 784S, 795S / 770L, 784L, 795L Hazard Alert Symbol On/Off Key Switch Power T raverse Speed Control SYMBOLS USED ON SCRUBTEC 770S, 784S, 795S Additional Brush Pressure Brush Up/Down Solution Cont[...]

  • Page 9

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 9 - 71018A 71015A 71017A W ARNING READ OPERA TOR'S MANUAL BEFORE OPERA TING THIS MACHINE RISK OF FIRE • Use only com- mercially available fl oor cleaners and waxes intended for machine operation. • Do not use fl am- mable materials. RISK OF INJUR Y OR DA[...]

  • Page 10

    -10- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 MACHINE CONTROL P ANEL 770S, 784S & 795S Key Switch (See Figure #1, Item “A”) The key switch turns “ON” the power to the control panel. “0” is “OFF” and “I” is “ON”. T raverse Speed Switch (See Figure #1, Item “B”) The speed contr[...]

  • Page 11

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 1 1 - F G B F E C D A N I J K L M H1 H2 MACHINE CONTROL P ANEL 770S, 784S & 795S Figure #1[...]

  • Page 12

    -12- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 MACHINE CONTROL P ANEL 770L, 784L & 795L Key Switch (See Figure #2 Item “A”) The key switch turns “ON” the power to the control panel. “O” is “OFF” and “I” is “ON”. T raverse Speed Switch (See Figure #2, Item “B”) The speed contro[...]

  • Page 13

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 13 - F G B F E C D A H I J K L M MACHINE CONTROL P ANEL 770L, 784L & 795L Figure #2[...]

  • Page 14

    -14- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Position arrow indicating current position of squeegee (up or down) Indicators are on all the time showing current settings. Screens A vailable to Operator “Battery” blinks when low voltage occurs. W ater “droplets” off when solution is off and they are [...]

  • Page 15

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 15 - Figure #3a Figure #3b Figure #3c Figure #5 Figure #4 EN MACHINE CONTROLS & FEA TURES Squeegee Lift Handle (“S Class” models only) See Figure #3a, 3b, & 3c. The squeegee lift handle is located below the control handles on the right side. It is used [...]

  • Page 16

    -16- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure #6a Figure #6b 38722B 38722B 38722B 38720B 38720B 38722B 38720B 38722B 38722B HOW TO PREP ARE THE MACHINE FOR OPERA- TION How T o Install The Batteries The Scrubtec machines use six 6-volt batteries. The batteries are located in the battery compartment un[...]

  • Page 17

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 17 - Figure #7 Correct fi ll level HOW TO PREP ARE THE MACHINE FOR OPERA TION Battery Maintenance The electrical power to operate the machine comes from the storage batteries. Storage batteries need preventive maintenance. W ARNING! Working with batteries can be d[...]

  • Page 18

    -18- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure # 8 Figure 8A HOW TO PREP ARE THE MACHINE FOR OPERA TION How T o Charge The Batteries W ARNING! Charging the batteries in an area without adequate ventilation could result in an explosion. T o prevent an explosion, charge the batteries only in an area wit[...]

  • Page 19

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 19 - Figure #9 Figure #10 HOW TO PREP ARE THE MACHINE FOR OPERA TION How T o Install The Brushes Or Pad Drivers T o install the brushes or pad drivers on the machine, follow this procedure: 1. T urn the key switch “ON”. 2. Put the brush switch in the “UP” p[...]

  • Page 20

    -20- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 B A Figure #1 1 HOW TO OPERA TE THE MACHINE How to Operate the One T ouch System (“L Class” models only) One touch cleaning is a feature on the new Scrubtec W alk-behind Scrubber . The factory defaults for this setting are two bars of brush pressure and four[...]

  • Page 21

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 21 - Figure #14 Figure #12 Figure #13 Figure #15 Figure #16 HOW TO OPERA TE THE MACHINE How T o Operate the Squeegee (“S Class” models only) The squeegee wipes the fl oor while the vacuum motor removes the dirty solution from the fl oor . Use your right hand [...]

  • Page 22

    Figure # 17 Figure #18 Figure #19 Page -22- Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 HOW TO OPERA TE THE MACHINE How T o Traverse Machine NOTE: Put the machine in the slow traverse speed (see fi gure #17). Use the machine in an area that has no furniture and objects until you can do the following: 1. Move the machine in a[...]

  • Page 23

    Figure #20 Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 - 23 - HOW TO OPERA TE THE MACHINE How to Clean a V ery Dirty Floor T o clean a very dirty fl oor , follow this procedure: 1. Apply solution to the fl oor. 2. Do not lower the squeegee. 3. Do not activate the vacuum motor . 4. Lower the brushes and scrub the fl oor. 5.[...]

  • Page 24

    -24- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure #21 Figure #22 Figure #23 B A MAINTENANCE Do These Procedures When Y ou End Y our Work 1. Drain the solution tank (Figure #21, item A) and the recovery tank (Figure #21, item B). T o drain the tanks , follow this procedure: a. T urn the key switch “OFF?[...]

  • Page 25

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 25 - Figure #24 Figure #25 MAINTENANCE These Maintenance Procedures Must Be Done Every Week: W ARNING! Maintenance and repairs must be done by authorized personnel only . Always empty the solution tank and the recovery tank before doing any maintenance. Keep all fa[...]

  • Page 26

    -26- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Figure #26 Figure #27 Figure #28 MAINTENANCE 7. Check the squeegee and the scrub brushes or the pad drivers for damage. 8. Check the squeegee and the vacuum hose for damage, leaks and obstructions. Maintenance For The Squeegee T o remove the squeegee, follow thi[...]

  • Page 27

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 27 - Figure #29 Figure #30 Figure #31 A B 0.12" (3.0 mm) MAINTENANCE Adjusting Squeegee Blades When properly installed the front blade should be approximately .12 above the rear blade. See fi gure #29. W ARNING! Maintenance and repairs must be done by authori[...]

  • Page 28

    -28- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 HOW TO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION The machine does not remove all the water from the fl oor. The squeegee is up Lower the squeegee. The vacuum tank is full. Drain the tank. The screen fi lter is dirty . Clean the screen fi lter . The[...]

  • Page 29

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 29 - SCRUBTEC 770L / 784L / 795L WB Common Error Codes ERROR CODE CAUSE ACTION 3100 3101 3102 3103 3104 3105 Probable short circuit of output device. Check the traction, brush and vac motor connections on the trio and check wiring from these connectors down to the [...]

  • Page 30

    -30- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795[...]

  • Page 31

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 31 - Section II Parts and Service Manual (70935A) U.S. Patent No. 6,760,947; No. 6,105,192; No. RE39, 581 (Deluxe Machines) SCRUBTEC 770 S SCRUBTEC 770 L SCRUBTEC 784 S SCRUBTEC 784 L SCRUBTEC 795 S SCRUBTEC 795 L[...]

  • Page 32

    -32- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Solution T ank Assembly 12/09 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 12 19 20 24 21 22 23 25 27 26 47 21 24 45 21 28 29 31 31 30 30 32 46 33 34 35 36 37 38 40 39 41 42 43 44[...]

  • Page 33

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 33 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Solution T ank Assembly 12/09 Item Ref. No. Qty Description 1 881317 6 Battery - 250 AH - 6 V olt 891384 6 Battery - 330 AH - 6 V olt 2 842406 3 Series Cable - 9” 3 40613A 1 Battery Cable, Black NOTE 1 4 40612A 1 Bat[...]

  • Page 34

    -34- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Recovery T ank Assembly 12/09 1 2 3 4 5 6 3 7 8 9 37 38 39 36 35 34 33 32 20 31 30 25 20 24 9 13 22 23 26 22 27 28 29 10 11 12 15 14 16 17 18 20 21 11 19[...]

  • Page 35

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 35 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Recovery T ank Assembly 12/09 Item Ref. No. Qty Description 1 962798 1 Screw , 10-24 x 1/2 PN 2 30057A 1 Recovery Lid 3 920296 2 Nut, 10-24 ESNA 4 30065B 1 Gasket, Lid 5 38020A 1 Strap 6 962666 1 Screw , 10-24 x 3/4 PN[...]

  • Page 36

    -36- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / Solo Speed Controller 12/09 43 38 51 42 41 44 45 46 54 40 39 47 48 49 50 52 54 36 37 5 34 33 35 26 5 53 18 21 20 16 5 6 13 12 7 11 10 9 5 30 14 15 5 29 27 28 32 18 17 31 18 5 25 24 23 20[...]

  • Page 37

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 37 - Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / Solo Speed Controller 12/09 Item Ref. No. Qty Description 1 40838A 1 Cord, Charger NOTE1 2 61598A 1 Bracket, Cord W rap NOTE1 3 85391A 4 Screw , 1/4-20 x 5/8 PN 4 30594A 1 Rear Cover 5[...]

  • Page 38

    -38- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / I-Drive Speed Controller 12/09[...]

  • Page 39

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 39 - Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Panel Assembly / I-Drive Speed Controller 12/09 Item Ref. No. Qty Description 1 40838A 1 Cord, Charger NOTE 1 2 61598A 1 Bracket, Cord Wrap NOTE 1 3 85391A 4 Screw , 1/4-20 x 5/8 PN (QTY of 2 on models[...]

  • Page 40

    -40- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 L / 784 L / 795 L Electrical Panel Assembly Drawing 2/07 Drawing # 10855E 22 6 3 7 8 4 37 29 30 18 10 5 20 21 5 5 17 27 18 26 20 25 28 24 23 11 7 13 12 31 32 31 35 33 5 34 5 19 2 9 5 6 14 15 16 1[...]

  • Page 41

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 41 - Nil fi sk AL TO SCRUBTEC 770 L / 784 L / 795 L Electrical Panel Assembly Parts List 2/07 Drawing # 10855E Item Ref. No. Qty Description 1 962798 1 Screw 2 87624A 2 W asher, Pulley 3 85391A 2 Screw , 1/4-20 x 5/8 PN 4 30626A 1 Rear Cover 5 81 104A 10 Nut, ESNA[...]

  • Page 42

    -42- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770L / 784L / 795L Control Panel Assembly 12/09 1 2 3 4 3 5 6 7 7 9 8 10 12 13 15 16 17 18A 18B 19 20 21 22 23 24 25 26 28 29 27 30 30 31 32 Item Ref. No. Qty Description 1 30592A 1 Control Handle 2 85815A 2 Screw , 5/16-18 x 1 1/2 3 98[...]

  • Page 43

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 43 - Nil fi sk AL TO SCRUBTEC 770S / 784S / 795S Control Panel Assembly / Solo Speed Controller 12/09 Item Ref. No. Qty Description 1 30592A 1 Control Handle 2 85815A 2 Screw , 5/16-18 x 1 1/2 3 980205 6 Washer , 5/16 Flat 4 85813A 4 Screw , 5/16-18 X 1 5 9201 10 [...]

  • Page 44

    -44- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770S / 784S / 795S Control Panel Assembly / I-Drive Speed Controller 12/09[...]

  • Page 45

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 45 - Item Ref. No. Qty Description 1 30592A 1 Control Handle 2 85815A 2 Screw , 5/16-18 x 1 1/2 3 980205 6 Washer , 5/16 Flat 4 85813A 4 Screw , 5/16-18 X 1 5 9201 10 4 Nut, LK 5/16-18 6 52556A 1 Reverse Switch 7 40738A 1 Traverse Potentiometer “S” 8 50962A 1 K[...]

  • Page 46

    -46- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Squeegee Swing Arm Assembly 12/09[...]

  • Page 47

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 47 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Squeegee Swing Arm Assembly 12/09 Item Ref. No. Qty Description 1 81303A 1 Nut, ¼-28 2 61679A 1 Cable, Lower 3 87625A 4 W asher,Nylon 1¼x¼x1/32 4 87623A 2 W asher , Nylon 1¼x¼x1/8 5 38021A 1 Strap 6 60678C 1 Pivot[...]

  • Page 48

    -48- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 Squeegee Assembly 12/09[...]

  • Page 49

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 49 - Nil fi sk AL TO SCRUBTEC 770 / 784 Squeegee Assembly 12/09 Item Ref. No. Qty Description 10803KL Squeegee Asm. 1 25201B 2 Knob 2 34260B 1 Squeegee Gasket 3 81301A 2 Nut, 3/8-16 Jam SS 4 30048A 2 Wheel, Gide 4” Diam. 5 53185A 2 Ring, 3/8 ID Snap 6 60272B 1 C[...]

  • Page 50

    -50- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 795 Squeegee Assembly 12/09[...]

  • Page 51

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 51 - Item Ref. No. Qty Description 10817KL 1 Squeegee Assy (STD) 1 25201B 2 Knob 2 34260B 1 Squeegee Gasket 3 81301A 2 Nut, Jam SS 4 60248A 2 Sleeve 5 30048A 2 Guide Wheel 6 81217A 2 Nut, 1/4-20 ESNA 7 80316A 2 Screw , ¼-20 x 1 Flat SS 8 38715A 2 Spacer (38) 9 627[...]

  • Page 52

    -52- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 T raverse System Assembly 2/05 12 13 31 32 30 13 21 20 15 14 3 19 28 19 9 29 30 11 16 18 8 10 27 26 25 24 23 7 6 7 23 5 4 2 1 3[...]

  • Page 53

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 53 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 T raverse System Assembly 2/05 Item Ref. No. Qty Description 1 66531A 1 Swing Arm Pin 2 83671 1 1 Hair Pin 3 81 104A 2 Nut, .25-20 ESNA 4 69877A 1 Swing Bracket 5 8581 1A 2 Screw , .312-18 x .75 6 57275A 1 Cable Pulley[...]

  • Page 54

    -54- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Brush Head Assembly Drawing 2/05 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 13 19 13 20 21 22 23 17 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 27 44 45 46 20 47 52 48 49 50 51 49 53 54 2 1 55[...]

  • Page 55

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 55 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Brush Head Assembly Parts List 1 1/07 Item Ref. No. Qty Description 1 82501A 2 Pin 2 766780 2 Hair Pin 3 38723A 2 Nylon Spacer 4 52497A 1 Actuator & T ube Asm. (S) 52499A 1 Actuator & Tube Asm. (L) [ ] 40910a 1[...]

  • Page 56

    -56- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Brush Motor #45036A 2/05 13 Seam Location 7 12 15 5 6 4 1 2 3 14 16 17 12 13 Rotation 8 9 10 11 Item Ref. No. Qty Description 1 46734A 1 Stator Assembly (w/Magnets & Clips) 2 40318A 1 Armature Asm.(w/B.E. & F .E.[...]

  • Page 57

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 57 - Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Gear Box #54238A 2/05 9 8 7 6 5 4 3 2 1 Item Ref. No. Qty Description 1 57846A 1 Ring, Snap 2 507641 1 Seal, Oil, Small 3 52050A 1 Cap End 4 56668A 1 O’Ring 5 51 176A 1 Bearing, Large 6 58316A 1 Shaft & Gear , Ge[...]

  • Page 58

    -58- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 / 784 / 795 Imperial T ransaxle Parts 2/05 PN 591 16A To replace coupler remove these two screws (Black) to separate the motor from gearbox to allow access to coupler PERMANENT MAGNET MOTOR MFG. IN USA Model 4BC-2800 HP .50 RPM 1200[...]

  • Page 59

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 59 - Item Ref. No. Qty Description Wheel Flange Kit (includes Flange, 1 10357A 2 Studs, Key , Snap Rings & Shims) 2 36508A 2 Rubber Mount 3 53374A 2 Axle Oil Seal 4 53375A 4 Axle Bearing 5 53376A 1 Short Axle 6 53377A 1 Output Gear 7 53378A 1 Input Plug 8 53379[...]

  • Page 60

    -60- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 ACCESSORIES Description Part No. Power W and System Kit 10892A Soft Caster Asm. 52127A Drive Wheel, Foam Filled 59955A Imperial Electric Parking Brake Kit 10684B Clarke Battery Maintenance System (CBMS) 53390A Chemical Mixing System 1 1081A Chemical Mixing Syste[...]

  • Page 61

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 61 - Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Schematic (Solo Controller) 9/05[...]

  • Page 62

    -62- FORM NO. 70935A Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 Nil fi sk AL TO SCRUBTEC 770 S / 784 S / 795 S Electrical Schematic (I-Drive Controller) 12/09[...]

  • Page 63

    Nil fi sk AL TO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 63 - Nil fi sk AL TO SCRUBTEC 770 L / 784 L / 795 L Electrical Schematic 9/05[...]

  • Page 64

    [...]

  • Page 65

    [...]

  • Page 66

    Overenstemmelseserklaering Declarati on de conformité Samsvarserklaering Declaration of conformity Verklaring van overeenstemming Vaatimust enmukaisuusvakuutus Konformitätserklärung Dichiarazione di conformità Atitikties deklaracija Declaración de conformidad Vastavussertifikaat Osv ě d č ení o shod ě Atbilst ī bas deklar ā cija Deklarac[...]

  • Page 67

    Nil fi sk AL TO reserves the right to make changes or improvements to its machine without notice. Always use genuine Nil fi sk AL TO Parts for repair . Nil fi sk AL TO LIMITED U.S. W ARRANTY This Nil fi sk AL TO Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service, when ope[...]

  • Page 68

    Division of Nil fi sk-Advance A/S Industrivej 1 9560 Hadsund Denmark T el.: (+45) 72 18 21 00 Fax: (+45) 72 18 21 1 1 E-mail: salg@nil fi sk-alto.dk E-mail: service@nil fi sk-alto.dk www .nil fi sk-alto.dk[...]