Onkyo CS-335 S manual

E n CD Receiv er CR-525 CR-325 Instruction Manual Thank you for purchasing an Onkyo CD receiv er. Please read this manual thoroughl y before making any connections and plugging it in. Follo wing the inst ructions in this ma nual will enable you to obtain opti mum performance and listening enjoyment from your new CD recei ver. Please retain th is ma[...]

2 Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventil ation openings. Install in accordance with the manuf acturer’ s instruct ions. 8. Do not install near an [...]

3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is ille gal with- out the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer . 3. Care —Occasionally you should dust the uni[...]

4 Precautions —Continued This unit contains a semic onductor laser system and is classified as a “CLASS 1 LASER PR ODUCT”. So, to use this model properly , read this Instruction Manual carefully . In case of any tr ouble, please contact the store where you purchased the unit. T o prevent being e xposed to the laser beam, do not try to open th[...]

5 Features Amplifier • WRA T (Wide Range Amplif ier T echnology) • High Current, Lo w Impedance Driv e • Discrete Output Stage Circuit ry • 2 Audio Inputs and 1 Output • Optimum Gain V olume Circuitry • Subwoofer Pre Out CD Pla yer • Plays CDs, MP3 CDs, CD-Rs and CD-R Ws *1 • 25 T rack Programming • 2 Repeat Mode (T rack/Full) •[...]

6 Bef ore Using the CD receiver In general, the illustrations in th is Instruction Manual sho w the CR-325. Notes: • If the rem ote controller doesn’ t work reliably , try replacing the batteries. • Don’ t mix new and old batteries or dif ferent types of batteries. • If you intend not to use the remote controller for a long time, remove t[...]

7 Contents Getting Star ted Important Safety Instructions .................................... 2 Precautions ............................................................... 3 Features .................................................................... 5 Supplied Accessories .. .............................................. 5 Before Using the CD re[...]

8 Getting to Kno w the CD receiver Fr ont P anel 12 3 5 4 6 7 bn bo bp 9 8 bk bl bm CR-525 12 3 5 4 6 bn bo bp 9 8 bk bl bm CR-325[...]

9 Getting to Know the CD receiver —Contin ued The page numbers in parentheses show where you can find the main explanation for each item. a ST ANDBY indicator (23, 25) Lights up in Standby mode. b ST ANDBY/ON button (25, 50, 53, 56) Sets the CD re ceiv er to On or Standb y . c Remote control sensor (6) Receiv es control signals from the remote co[...]

10 Getting to Know the CD receiver —Contin ued a SLEEP indicator Lights up when the Sleep function has been set. b USB indicator (CR-525 only) The CD receiver lights up on detecting a USB mass storage device. c File fo rmat indicators MP3: Lights up when an MP3 f ile is loaded. WMA (CR-525 only): Lights up when a WMA file is loaded. d FOLDER indi[...]

11 Getting to Know the CD receiver —Contin ued The page numbers in parentheses show where you can find the main explanation for each item. a MD/T APE IN/O UT (21, 22) These analog audio inputs and outputs ar e for con- necting a recorder with an analog in put and output, such as a MiniDisc recorder or cassette deck. b DOCK IN (23) This analog aud[...]

12 Getting to Know the CD receiver —Contin ued Remote Contr oller bm bq bo bs bt cl ck br cm cn 2 1 3 5 bl 4 bn 6 7 bp bq bo bs bt cl ck br cm cn bp 8 9 bk bm 2 1 3 5 bl 4 bn 6 7 8 bk RC-721S (CR-525) RC-660S (CR-325)[...]

13 Getting to Know the CD receiver —Contin ued The page numbers in parentheses show where you can find the main explanation for each item. a ST ANDBY/ON button (25, 50, 53) This bu tton is used to set the CD recei ver to On or Standby . b SLEEP button (55) Used to set the Sleep timer, which turns of f the CD recei ver after a sp ecified tim e. c [...]

14 Getting to Know the CD receiver —Contin ued Contro lling an Onky o MD recor der , cassette dec k, or RI Doc k Explanation of b uttons for usin g the Onky o MD record er , cassette deck, or RI Dock, when connected to the MD/T APE jack or DOCK IN jack of the CD receiver. • See pages 21-23 for instructi ons on connecting the components. • T o[...]

15 Disc Notes Supported Discs The CD receiv er supports the following discs. • Some audio CDs use copy pr otection that doesn’ t con- form to the of ficial CD standard. Since these are non- standard discs, they may not play properly in the CD recei ver. • The CD receiver supports 8 cm and 12 cm discs. • The CD receiver does not s upport dis[...]

16 Disc Notes —Continued • The following ID3 tags are supp orted: versions 1.0/1.1 and 2.2/2.3/2.4. V ersions 2.5 and later are not sup- ported. Normally , version 2. 2/2.3/2.4 tags ha ve prior- ity and will be displayed. • For ID3 version 2 tags, the tag info rmation recognized will be those embedded in the beginning of the file. W e recomme[...]

17 Connecting Antennas This section explains ho w to connect the supplied indoor FM antenna and AM loop ante nna, and how to connect commercially a vailable outdoor FM and AM an tennas. The CD recei ver won’ t pick up any radio signals without an antenna connected, so you must connect the antenna to use the tuner . Connecting the Indoor FM Anten [...]

18 Connecting Antennas —Continued Connecting an Outdoo r FM Antenna If you cannot achie ve good reception with the supplied indoor FM antenna, try a co mmercially a vailable out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, but usable results can sometimes be obta i ned when installed in an attic or loft. • For bes[...]

19 Connecting Speaker s Connecting Y our Speakers • Connect the right speaker to the CD receiver’ s right (R) SPEAKERS terminals. Connect th e left speaker to the left (L) SPEAKERS terminals. • Connect the positiv e (+) termin al on each speaker to the corresponding positiv e (+) terminal on the CD receiver. Connect the negati ve (–) termin[...]

20 Connecting Other Components • Before making any connec tions, read the manuals supplied with your other components. • Don’t connect the power cord until you’ ve completed and double-checked all connections. Connection Color Coding RCA-type audio connections are usually color-coded: red and white. Use red plugs to connect right-channel au[...]

21 Connecting Other Components —Continued The following diagram sho ws ho w to c onnect an optional Onkyo cassette deck. Connect the CD recei ver’ s MD/T APE OUT jacks to the cassette deck’ s INPU T (REC) jacks, and connect the CD recei ver’ s MD/T APE IN jacks to the cassette deck’ s OUTPUT (PLA Y) jacks. What can you do with u ? • Con[...]

22 Connecting Other Components —Continued The following d iagram shows ho w to c onnect an optional Onkyo MD recorder . Connect the CD recei ver’ s MD/T APE OUT jacks to the MD recorder’ s INPUT (REC) jacks, and connect the CD recei ver’ s MD/T APE IN jacks to the MD recorder’ s OUTPUT (PLA Y) jacks. What can you do with u ? • Connectin[...]

23 Connecting Other Components —Continued The following diagram sho ws ho w to connect an op tional Onkyo RI Dock (Remote Interacti ve Dock). Connect the CD recei ver’ s DOCK IN jack s to the RI Dock’ s A UDIO OUT jacks. What can you do with u ? • Connecting an Onkyo RI Dock to the CD receiver with an u cable allo ws you to control the RI D[...]

24 Firs t Time Setup (European models onl y) T o use the AccuClock function, the CD re cei ver must be able to receiv e RDS radio stations, which means an FM antenna must be connected. Be sure to connect an FM an tenna before attempting to us e this function (see page 17). The very first time y ou turn on the CD recei ver, the AccuCloc k function a[...]

25 Basic Operations T o turn on the CD receiver, press th e [ST ANDBY/ON] butto n on the CD recei ver or remote controlle r . The ST ANDBY indicator goes off. Press the [ST ANDBY/ON] button again to set the CD receiv er to S tandby . The ST ANDBY indicator li ghts up. Tip: When you start playback on (or turn on) an Onkyo RI Dock, MD recorder , or c[...]

26 Basic Oper ations —Continued T o turn on the Super Bass function, press th e [S.BASS] b utton. The S.B ASS indicator lights up. T o turn off the Super Bass function, press the [S.B ASS] button again. Note: If you press the [S.B ASS] button while the Direct func- tion is on, the Direct fu n ction will be turned of f. T o turn the Direct f uncti[...]

27 Basic Operations —Continued Y ou can choose what name is di splayed when an input source is selected so that it matches the t ype of component that you’ ve connected to the MD/T APE IN. When you connect an Onkyo u -capable component, it’ s important that you select the input source name that matches the type of component for u to work prop[...]

28 Pla ying CDs Selecting T rac ks T o retu rn t o th e b egi nn in g of th e track currently playing, pr ess the Pre vious [ 7 ] button. Press the Pr evious [ 7 ] b utton repeatedly to select earlier tracks. • While playback is stopped, pressing the Pre vious [ 7 ] b utton will select the pre vious track. Press the Next [ 6 ] button repeatedly t[...]

29 Playing CDs —Contin ued During playback or while playback is pa used, press the remote controller’ s [DIS PLA Y] b utton repeatedly to display the followi ng CD information. Note: Y ou can also use the CD receiver’ s [DIS PLA Y] b utton to displa y this information. Using the Remote Contr oller T o select: Use the number buttons as sho wn [...]

30 Playing CDs —Contin ued On an MP3 CD, MP3 files may be organ ized in a hierar- chically , with folders contai ning f iles and subfolders, as shown belo w . On the CD receiv er, there are two modes for selecting MP3 files: Navigation mode and All F older mode . In Navigation mode, you ca n select MP3 f iles by navig ating through the folder hie[...]

31 Playing CDs —Contin ued Selecting MP3 Fi les in All Folder Mode W ith All F older mode, you don’t h ave to n avigate the folder hierarchy because al l folders that contain MP3 files a ppear at the same le vel. If random playback is curr ently selected, press the [YES/MODE] button to cancel it before proceeding. T o se lect an MP3 file in a n[...]

32 Playing CDs —Contin ued Playin g the MP3 Files in Only One Folde r Normally , all of the MP3 files in all of the folders on the disc are played. W ith 1-fo lder playback, only the MP3 files in the specified folder are played . Y ou can display v arious info rmation about the MP3 file currently playing, including ID3 tags such as titl e, artist[...]

33 Playing CDs —Contin ued W ith memory playback, you can create a playlist of up to 25 tracks. Memory playback can be set only when the input source is set to CD and playback is stopped. Selecting Other T ra cks During Memory Playbac k T o select other playlist tr acks during memory playback , use the remote controller ’ s Previous and Ne xt [[...]

34 Playing CDs —Contin ued W ith random playback, all of the tracks on the disc are played in random order . Random playback can be set only when the input source is set to CD and playback is stopped. Cancelling Random Pla yback • T o cancel random playback, press the [SHUFFLE] button repeatedly until th e RANDOM indicator disap- pears. • Ran[...]

35 Playing CDs —Contin ued W ith the MP3 preferences, you can change the w ay MP3 file i nformation is displa yed and the way MP3 CDs are played. The MP3 preferences can be set only when the input source is set to CD and playback is stopped. T o cancel the procedure at any point, press the [MENU/NO] button. Preferences Bad Name? This preference d[...]

36 Playing CDs —Contin ued The follow ing table shows a fe w examples of numbered file and folder names and ho w they will appear with the “Disable” a nd “E nable” options. Note: On the CR-525, this setting will be reflected e ven when playing MP3 and WMA f iles from a USB ma ss storage dev ice that is connected to the USB port of the CR-[...]

37 Using USB interface (CR-525 onl y) The CR-525 can play back MP3 and WMA files that hav e been stored on USB ma ss storage devices, e.g., USB flash driv es and MP3 players. Supported A udio File Formats For USB mass storage de vice playback, the CD receiv er supports the follo wing music fi le formats. ■ MP3 • MP3 files must be MPEG -1 Audio [...]

38 Using USB interf ace (CR-525 only) —Contin ued This section explains ho w to play music files on a USB mass storage device. Connect a USB mass storage device as sho wn below . Displa y during Stop Note: In general, playback of USB mass storage de vice music files is a repeating playback. When all music f iles hav e been played, p layback will [...]

39 Using USB interf ace (CR-525 only) —Continued Resume Pla yback After playback has been stopped, when the Play [ 1 ] button is pr essed to begin playback again, it will resume playback from the be ginning of the file in which it stopped. Cancelling Resume Playbac k While playback is stopped, pr ess the Stop [ 2 ] b utton. “Resume Clear” wil[...]

40 Using USB interf ace (CR-525 only) —Contin ued Displaying Music File Information Y ou can display v arious info rmation about the MP3 and WMA file s currently playing, including ID3 tags such as title, artist name, and al bum name. Elapsed time: The length of time that th e current MP3 or WMA file has been playing (default display). If the ela[...]

41 Listening to the Radio When tuned in to a stati on, the T uned indicator appears. When tuned into a stereo FM stat ion, the FM ST indicator appears as well. T uning into weak stereo FM station s If the signal from a stereo FM stat ion is weak, it may be impossible to get good reception. In this case, switch to Manual T uning mode and listen to t[...]

42 Listening to the Radio —Continued W ith the Auto Preset function, you can au tomatically preset all of the FM radio stations a va ilable in you r area in one go. Presets make it easy to select your fa vorite stations and eliminate the need to tune the radio manually each time you want to change stations. The Auto Preset function does not prese[...]

43 Listening to the Radio —Continued W ith the Preset Write function, you can ma nually preset indi vidual AM and FM radi o stations. Presets make it easy to select your fa vorite sta tions and eliminate the need to tune the radio manually each time you want to chang e stations. FM stations can also be pres et automatically (see page 42). For Eur[...]

44 Listening to the Radio —Continued Y ou must store some presets before you can select them (see pages 42 and 43). Y ou can also use the front panel contr ols. 1. Use the [INPUT] button to select “ AM” or “FM”. 2. Use the PRESET [ t ]/[ 1 ] b uttons to select a preset. Selecting Preset Stations 1 Use the [BAND] or INPUT [ t ]/[ 1 ] butto[...]

45 Listening to the Radio —Continued Press the r emote controller’ s [DISPLA Y] bu tton repeatedly to display mor e radio information. Y ou can also use the CD receiver’ s [DIS PLA Y] b utton to displa y this information. RDS is only av ailable on European models and only in areas where RDS broadcas ts are av ailable. What is RDS? RDS stands [...]

46 Listening to the Radio —Continued Y ou can name presets for easy identif ication. The preset name may contain of up to eight characters. A vailable Characters Naming Presets 1 Select the preset you want to name (see page 44). 2 Press the [MENU/NO] button, and then use the Previous and Next [ 7 ]/[ 6 ] bu ttons to select “Name In?”. 3 Press[...]

47 Listening to the Radio —Continued W ith the Preset Copy function, you can or ganize your presets in the order you want. When you copy a preset, its name is also copied. Tip : If you fa vorite station is stor ed in preset #5 and you want to make it preset #1, copy preset #5 to preset #1. T o keep the station that’ s already stored in preset #[...]

48 Listening to the Radio —Continued Erasing a Preset’ s Name 1 Select the preset whos e name you want to erase (see pag e 44). 2 Press the [MENU/NO] button, and then use the Previous and Next [ 7 ]/[ 6 ] bu ttons to select “NameErase?”. 3 T o er ase the preset’ s name, press the [YES/MODE] b utton. The preset’ s name is erased and “C[...]

49 Setting the Cloc k The AccuClock function normally uses the FM station with the strongest signal to set the clock. Howe ver , if the clock cannot be set properly using that stati on, you can specify which FM station th e AccuClock function should use. This must be an FM station that supports RDS CT (Clock T ime) information. Setting AccuCloc k t[...]

50 Setting the Clock —Contin ued The time can be displayed in either 12- or 24-hour for- mat. Displa ying the Da y and Time T o display the day and time, press the remote controller’ s [CLOCK CALL] button. If the CD recei ver is on Standb y , the time is displayed for 8 seconds. Using the 1 2- or 24-hour Format T o change the time format betwee[...]

51 Using the Timer s The CD receiv er has fi ve timers: four programmable tim- ers for automated playback or recording, and a sleep timer for turning the CD recei ver of f after a specified period. The timers can be used with other Onkyo components that are connected to the CD recei ver via u (see pages 21 to 23 for hookup details). The va rious se[...]

52 Using the Timers —Contin ued Notes: • Y ou must set the clock before you can program the timers. • Before programming a timer to turn on the rad io, you must preset the station you want to use. (See pages 42 and 43.) • If you don’t operate an y buttons for 60 seconds while programming a timer , the proc edure will be cancelled and the [...]

53 Using the Timers —Contin ued T o return to step 1 and start timer programming all ov er again, press the [MENU/NO] bu tton at any point in this procedure. 7 If you selected “Once”, use the Previous and Next [ 7 ]/[ 6 ] buttons to select the da y , and then press [ENTER]. Y ou can select: SUN, MON, TUE, WED, THU, FRI, or SA T. Go to step 10[...]

54 Using the Timers —Contin ued Once a timer has been programmed, you can turn it on or off as necessary . For example, while you’ re on holiday , you may want to turn off th e timer you use as an early- morning alarm. T urning Timer s On and Off 1 Press the [TIMER] button repeat- edly to select timer 1, 2, 3, or 4. When a timer has been progra[...]

55 Using the Timers —Contin ued W ith the sleep timer , you can set the CD receiv er so that it automatically turn s off after a spe cified perio d. Chec king the Remaining Sleep Time T o check the remaining sleep time, press the [SLEEP] butto n. Note that if you press the [S LEEP] b utton while the sleep time is being displayed, you’l l sh ort[...]

56 T r oubleshooting If you hav e any trouble using the CD receiver, loo k for a solution in this section. Can’t turn on the CD receiver. • Make sure that the po wer cord is properl y plugged into the wall outlet (see page 23). • Unplug the power cord from the wall outlet, wa it 5 seconds or more, then plug it in ag ain. The CD receiver turns[...]

57 T r oubleshooting —Continued Audio performance • Audio performance will be at its best a bout 10 to 30 minutes after the CD rece i ver has been turned on and had time to warm up. • Using cable ties to b undle audio cables with speaker or power cables may de grade the sound quality , so don’t do it. Playbac k jumps. • The CD recei ver i[...]

58 T r oubleshooting —Continued Can’t access the music files on a USB mass storage device. • Make sure that the USB indicato r light is on. If the light is not on, make su re that it is connect ed correctly and that the USB mass storage device is one th at is sup ported (see pages 37, 38). • The CD receiver sup ports USB mass storage device[...]

59 Specifications Specifications and features are subject to change without notice. General CR-525 CR-325 Pow er Supply: European: A C 220 - 230 V , 50/60 Hz Others: A C 220 - 230 V , 50/60 Hz AC 120 V , 60 Hz European: AC 220 - 230 V , 50/ 60 Hz North America n: AC 120 V , 60 Hz Others: A C 220 - 230 V , 50/ 60 Hz A C 120 V , 60 Hz Power Consumpti[...]

60 SN 29344705 Y0802-1 (C) Copyright 2008 ONKY O CORPORA TION Japan. All rights reser ved. http://www.onky o.com/ HOMEP AGE Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: [...]