Go to page of
Similar user manuals
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Opel Corsa (2016), along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Opel Corsa (2016) one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Opel Corsa (2016). A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Opel Corsa (2016) should contain:
- informations concerning technical data of Opel Corsa (2016)
- name of the manufacturer and a year of construction of the Opel Corsa (2016) item
- rules of operation, control and maintenance of the Opel Corsa (2016) item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Opel Corsa (2016) alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Opel Corsa (2016), and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Opel service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Opel Corsa (2016).
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Opel Corsa (2016) item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
OPEL CORSA Owner's Manual[...]
-
Page 2
[...]
-
Page 3
Introduction .................................... 2 In brief ............................................ 6 Keys, doors and windows ............ 22 Seats, restraints ........................... 36 Storage ........................................ 58 Instruments and controls ............. 76 Lighting ...................................... 115 Climate[...]
-
Page 4
2 Introduction Introduction[...]
-
Page 5
Introduction 3 Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. This information is available in the sections "Service and maintenance" and "Technical data" as well as on the identification plate. Introduction Your vehicle is a designed combination of advanced technol[...]
-
Page 6
4 Introduction Danger, Warnings and Cautions 9 Danger Text marked 9 Danger provides information on risk of fatal injury. Disregarding this information may endanger life. 9 Warning Text marked 9 Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides informati[...]
-
Page 7
Introduction 5[...]
-
Page 8
6 In brief In brief Initial drive information Vehicle unlocking Press c to unlock the doors and load compartment. Open the doors by pulling the handles. To open the tailgate, push the touchpad switch below the brand emblem. Radio remote control 3 23, Central locking system 3 24, Load compartment 3 27.[...]
-
Page 9
In brief 7 Seat adjustment Longitudinal adjustment Pull handle, slide seat, release handle. Try to move the seat back and forth to ensure that the seat is locked in place. Seat position 3 37, Seat adjustment 3 38. Backrest inclination Turn handwheel. Do not lean on backrest while adjusting. Seat position 3 37, Seat adjustment 3 38, Seat folding 3 3[...]
-
Page 10
8 In brief Head restraint adjustment Press release button, adjust height, engage. Head restraints 3 36. Seat belt Pull out the seat belt and engage in belt buckle. The seat belt must not be twisted and must fit close against the body. The backrest must not be tilted back too far (maximum approx. 25 °). To release belt, press red button on belt buc[...]
-
Page 11
In brief 9 Dazzle from following vehicles at night is automatically reduced. Automatic anti-dazzle interior mirror 3 31. Exterior mirrors Select the relevant exterior mirror with the rocker switch and adjust the mirror with the control : . Convex exterior mirrors 3 30, Electric adjustment 3 30, Folding exterior mirrors 3 30. Heated exterior mirrors[...]
-
Page 12
10 In brief Instrument panel overview[...]
-
Page 13
In brief 11 1 Turn and lane-change signals, headlight flash, low beam and high beam .... 120 Exit lighting ......................... 124 Parking lights ...................... 121 Buttons for Driver Information Centre ................ 97 2 Instruments .......................... 84 3 Forward collision alert indicator ............................. 160[...]
-
Page 14
12 In brief[...]
-
Page 15
In brief 13 1 Turn and lane-change signals, headlight flash, low beam and high beam .... 120 Exit lighting ......................... 124 Parking lights ...................... 121 Buttons for Driver Information Centre ................ 97 2 Instruments .......................... 84 3 Forward collision alert indicator ............................. 160[...]
-
Page 16
14 In brief Exterior lighting Light switch Turn light switch: 7 : lights off 8 : sidelights 9 : headlights Fog lights Press buttons in light switch > : front fog lights r : rear fog light Light switch with automatic light control AUTO : automatic light control: exterior lighting is switched on and off automatically m : activation or deactivation[...]
-
Page 17
In brief 15 Turn and lane-change signals lever up : right turn signal lever down : left turn signal Turn and lane-change signals 3 120, Parking lights 3 121. Hazard warning flashers Operated by pressing ¨ . Hazard warning flashers 3 119. Horn Press j .[...]
-
Page 18
16 In brief Washer and wiper systems Windscreen wiper HI : fast LO : slow INT : interval wiping or automatic wiping with rain sensor OFF : off For single wipe when the wiper is off, press lever down to position 1x . Windscreen wiper 3 78. Windscreen washer Pull lever. Windscreen washer system 3 78, Washer fluid 3 195, Wiper blade replacement 3 198.[...]
-
Page 19
In brief 17 Rear window washer Push lever. Washer fluid is sprayed on the rear window and the wiper wipes a few times. Rear window wiper/washer 3 80. Climate control Heated rear window The heating is operated by pressing Ü . Heated rear window 3 33, heated windscreen 3 34. Heated exterior mirrors Pressing Ü also activates the heated exterior mirr[...]
-
Page 20
18 In brief Transmission Manual transmission Reverse: with the vehicle stationary, depress clutch pedal and press the release button on the selector lever and engage the gear. If the gear does not engage, set the lever to neutral, release the clutch pedal and depress again; then repeat gear selection. Manual transmission 3 148. Automatic transmissi[...]
-
Page 21
In brief 19 Starting off Check before starting off ● Tyre pressure and condition 3 213, 3 253. ● Engine oil level and fluid levels 3 193. ● All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational. ● Proper position of mirrors, seats, and seat belts 3 30, 3 37, 3 42. ● Brake function a[...]
-
Page 22
20 In brief Stop-start system If the vehicle is at a low speed or at a standstill and certain conditions are fulfilled, activate an Autostop as follows: Vehicles with manual transmission: ● Depress the clutch pedal. ● Set the lever to neutral. ● Release the clutch pedal. An Autostop is indicated by the control indicator D . To restart the eng[...]
-
Page 23
In brief 21 set the selector lever to position P before removing the ignition key. Turn the front wheels towards the kerb. ● Close the windows and the sunroof. ● Remove the ignition key from the ignition switch. Turn the steering wheel until the steering wheel lock is felt to engage. For vehicles with automatic transmission, the key can only be[...]
-
Page 24
22 Keys, doors and windows Keys, doors and windows Keys, locks ................................... 22 Keys .......................................... 22 Car Pass .................................... 23 Radio remote control ................. 23 Memorised settings ................... 24 Central locking system .............. 24 Automatic locking .....[...]
-
Page 25
Keys, doors and windows 23 Key with foldaway key section Press button to extend. To fold the key, first press the button. Car Pass The Car Pass contains security- related vehicle data and should therefore be kept in a safe place. When the vehicle is taken to a workshop, this vehicle data is needed in order to perform certain operations. Radio remot[...]
-
Page 26
24 Keys, doors and windows Radio remote control battery replacement Replace the battery as soon as the range reduces. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. Extend the key and open the unit sideways. Replace the battery (battery type CR 2032), paying attention to the instal[...]
-
Page 27
Keys, doors and windows 25 Unlocking Press c . Two settings are selectable in the Info-Display: ● To unlock only the driver's door, load compartment and fuel filler flap; press c once. To unlock all doors; press c twice. ● Press c once to unlock doors, load compartment and fuel filler flap. Vehicle personalisation 3 107. The setting can be[...]
-
Page 28
26 Keys, doors and windows Fault in radio remote control system Unlocking Manually unlock the driver's door by turning the key in the lock. Switch on the ignition and press the central locking button c to unlock the other doors, load compartment and fuel filler flap. By switching on the ignition, the anti- theft locking system is deactivated. [...]
-
Page 29
Keys, doors and windows 27 Using a key or suitable screwdriver, turn switch on rear door lock to the horizontal position. The door cannot be opened from inside. Doors Load compartment Tailgate Opening To open the tailgate, push the touchpad switch below the brand emblem. Closing Use interior handle. Do not press the touchpad switch whilst closing a[...]
-
Page 30
28 Keys, doors and windows gases, which cannot be seen or smelled, could enter the vehicle. This can cause unconsciousness and even death. Caution Before opening the tailgate, check overhead obstructions, e.g. a garage door, to avoid damage to the tailgate. Always check the moving area above and behind the tailgate. Note The installation of certain[...]
-
Page 31
Keys, doors and windows 29 Activation ● Self-activated 30 seconds after locking the vehicle by pressing e once. ● Directly by pressing e twice within five seconds. Status LED Status LED is integrated in the sensor on top of the instrument panel. Status during the first 30 seconds of anti-theft alarm system activation: LED illuminates : test, ar[...]
-
Page 32
30 Keys, doors and windows If the control indicator d flashes when the ignition is on, there is a fault in the system; the engine cannot be started. Switch off the ignition and repeat the start attempt. If the control indicator continues flashing, attempt to start the engine using the spare key and seek the assistance of a workshop. Note The immobi[...]
-
Page 33
Keys, doors and windows 31 Heated mirrors Operated by pressing Ü . Mirror heating works with the engine running. It is switched off automatically after six minutes. Pressing Ü once more during the same ignition cycle allows the heating to operate for another three minutes. Interior mirrors Manual anti-dazzle To reduce dazzle, adjust the lever on [...]
-
Page 34
32 Keys, doors and windows Windows Windscreen Windscreen stickers Do not attach stickers, e.g. toll road stickers or similar, on the windscreen in the area of the interior mirror. Otherwise the detection zone of the sensor in the mirror housing could be restricted. Windscreen replacement Caution If the vehicle has a front-looking camera sensor for [...]
-
Page 35
Keys, doors and windows 33 Longer pull: window closes automatically upto end position. To stop movement, operate switch once more. Safety function If the window glass encounters resistance above the middle of the window during automatic closing, it is immediately stopped and opened again. Override safety function In the event of closing difficultie[...]
-
Page 36
34 Keys, doors and windows Heated windscreen Operated by pressing Ü . Windscreen heating works together with heated rear window and engine running. It is switched off automatically after six minutes. Pressing Ü once more during the same ignition cycle allows the heating to operate for another three minutes. Sun visors The sun visors can be folded[...]
-
Page 37
Keys, doors and windows 35 Raise Hold switch ü depressed until the sunroof is raised at the rear. Open From raised position press and release switch ü : the sunroof is opened automatically up to end position. To stop movement before endposition, operate switch once more. Close Hold switch d depressed from any position until sunroof is closed comp[...]
-
Page 38
36 Seats, restraints Seats, restraints Head restraints ............................ 36 Front seats ................................... 37 Seat position .............................. 37 Seat adjustment ........................ 38 Seat folding ............................... 39 Heating ...................................... 40 Seat belts ...........[...]
-
Page 39
Seats, restraints 37 Rear head restraints, height adjustment Pull the head restraint upwards and let engage. To move downwards, press the catch to release and push the head restraint downwards. Removal of rear head restraint E.g. when using a child restraint system 3 50. Press both catches, pull the head restraint upwards and remove. Place the head[...]
-
Page 40
38 Seats, restraints ● Sit with buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that legs are slightly angled when fully pressing the pedals. Slide the front passenger seat as far back as possible. ● Set seat height high enough to have a clear field of vision on all sides and of all [...]
-
Page 41
Seats, restraints 39 Backrest inclination Turn handwheel to adjust inclination. Do not lean on backrest while adjusting. Seat height Lever pumping motion up : seat higher down : seat lower Seat folding Standard seat folding Pull release lever towards the front and fold backrest forwards. Then slide seat forwards to the stop. To restore, slide the s[...]
-
Page 42
40 Seats, restraints 9 Warning When folding up, ensure that the seat is securely locked in position before driving. Failure to do so may result in personal injury in the event of heavy braking or collision. The memory function allows the seat to engage in its original position after folding. Do not operate handwheel for backrest inclination when ba[...]
-
Page 43
Seats, restraints 41 Activate seat heating by pressing ß for the respective front seat. Activation is indicated by the LED in the button. Pressing ß once more deactivates seat heating. Seat heating is operational when engine is running. During an Autostop, seat heating is also operational. Stop-start system 3 139. Seat belts The seat belts are lo[...]
-
Page 44
42 Seats, restraints Belt force limiters On the front seats and the rear outboard seats, stress on the body is reduced by the gradual release of the belt during a collision. Belt pretensioners In the event of a head-on or rear-end collision of a certain severity, the front seat belts are tightened. 9 Warning Incorrect handling (e.g. removal or fitt[...]
-
Page 45
Seats, restraints 43 Height adjustment 1. Pull belt out slightly. 2. Shift the height adjustment upwards or press button to disengage and push the height adjustment downwards. Adjust the height so that the belt lies across the shoulder. It must not lie across the throat or upper arm. Do not adjust while driving. Removing To release belt, press red [...]
-
Page 46
44 Seats, restraints Using the seat belt while pregnant 9 Warning The lap belt must be positioned as low as possible across the pelvis to prevent pressure on the abdomen. Airbag system The airbag system consists of a number of individual systems depending on the scope of equipment. When triggered, the airbags inflate within milliseconds. They also [...]
-
Page 47
Seats, restraints 45 Child restraint systems on front passenger seat with airbag systems EN: NEVER use a rearward-facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it; DEATH or SERIOUS INJURY to the CHILD can occur. DE: Nach hinten gerichtete Kindersitze NIEMALS auf einem Sitz verwenden, der durch einen davor befindlichen A[...]
-
Page 48
46 Seats, restraints mesmo, poderá ocorrer a PERDA DE VIDA ou FERIMENTOS GRAVES na CRIANÇA. IT: Non usare mai un sistema di sicurezza per bambini rivolto all'indietro su un sedile protetto da AIRBAG ATTIVO di fronte ad esso: pericolo di MORTE o LESIONI GRAVI per il BAMBINO! EL: ΠΟΤΕ μη χρησιμοποιείτε παιδικό κάθ[...]
-
Page 49
Seats, restraints 47 CS: NIKDY nepoužívejte dětský zádržný systém instalovaný proti směru jízdy na sedadle, které je chráněno před sedadlem AKTIVNÍM AIRBAGEM. Mohlo by dojít k VÁŽNÉMU PORANĚNÍ nebo ÚMRTÍ DÍTĚTE. SK: NIKDY nepoužívajte detskú sedačku otočenú vzad na sedadle chránenom AKTÍVNYM AIRBAGOM, pretože mô?[...]
-
Page 50
48 Seats, restraints The inflated airbags cushion the impact, thereby reducing the risk of injury to the upper body and head of the front seat occupants considerably. 9 Warning Optimum protection is only provided when the seat is in the proper position. Seat position 3 37. Keep the area in which the airbag inflates clear of obstructions. Fit the se[...]
-
Page 51
Seats, restraints 49 Curtain airbag system The curtain airbag system consists of an airbag in the roof frame on each side. The location is identified by the word AIRBAG on the roof pillars. The curtain airbag system is triggered in the event of a side-on impact of a certain severity. The ignition must be switched on. The inflated airbags cushion th[...]
-
Page 52
50 Seats, restraints 9 Danger Deactivate passenger airbag only in combination with the use of a child restraint system, subject to the instructions and restrictions in the tables 3 52. Otherwise, there is a risk of fatal injury for a person occupying a seat with a deactivated front passenger airbag. If the control indicator V illuminates for approx[...]
-
Page 53
Seats, restraints 51 9 Danger If using a rear-facing child restraint system on the front passenger seat, the airbag system for the front passenger seat must be deactivated. This also applies to certain forward-facing child restraint systems as indicated in the tables 3 52. Airbag deactivation 3 49. Airbag label 3 44. The rear seats are the most con[...]
-
Page 54
52 Seats, restraints Child restraint installation locations Permissible options for fastening a child restraint system with a three-point seat belt Weight and age class On front passenger seat On rear outboard seats On rear centre seat activated airbag deactivated airbag Group 0: up to 10 kg or approx. 10 months X U 1,2 U/L 3 X Group 0+: up to 13 k[...]
-
Page 55
Seats, restraints 53 2 : move seat height adjustment upwards as far as necessary and adjust seat backrest inclination as far as necessary to a vertical position to ensure that the belt is tight on the buckle side 3 : move the respective front seat ahead of the child restraint system forwards as far as necessary 4 : adjust the respective backrest to[...]
-
Page 56
54 Seats, restraints Weight class Size class Fixture On front passenger seat 5 On rear outboard seats On rear centre seat activated airbag deactivated airbag Group II: 15 to 25 kg or approx. 3 to 7 years IL 1,2 X IL 3,4 X Group III: 22 to 36 kg or approx. 6 to 12 years IL 1,2 X IL 3,4 X IL : suitable for particular ISOFIX restraint systems of the &[...]
-
Page 57
Seats, restraints 55 ISOFIX size class and seat device A – ISO/F3 : forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg B – ISO/F2 : forward-facing child restraint system for smaller children in the weight class 9 to 18 kg B1 – ISO/F2X : forward-facing child restraint system for smaller children i[...]
-
Page 58
56 Seats, restraints ISOFIX child restraint systems Fasten vehicle-approved ISOFIX child restraint systems to the ISOFIX mounting brackets. Specific vehicle ISOFIX child restraint system positions are marked in the table by IL. The vehicle is equipped with guides in the backrests to support the installation of the child restraint system. ISOFIX chi[...]
-
Page 59
Seats, restraints 57 Top-tether fastening eye on front passenger seat An additional fastening point is located on the passenger seat rail in the rear foot well.[...]
-
Page 60
58 Storage Storage Storage compartments ................ 58 Glovebox ................................... 58 Cupholders ................................ 58 Front storage ............................. 59 Underseat storage ..................... 60 Rear carrier system ................... 60 Load compartment ....................... 68 Load compartment c[...]
-
Page 61
Storage 59 The pockets in the doors are designed to carry bottles. Additional bottleholders are located in the rear side panels. Flexible cupholder strap A movable rubber strap is located in the storage compartment in front of the gear selector lever. Pull out the strap to fix a cup or ashtray. Front storage Storage compartments are located below t[...]
-
Page 62
60 Storage Underseat storage Lift at recessed edge and pull out. Maximum load: 1.5 kg. To close, push in and engage. Rear carrier system The rear carrier system (Flex-Fix system) allows bicycles to be attached to a pull-out carrier integrated into the vehicle floor. The transportation of other objects is not permitted. The maximum load of the rear [...]
-
Page 63
Storage 61 Pull release lever up. The system disengages and travels quickly out of the bumper. Completely pull out the rear carrier system until you hear it engage. Ensure that it is not possible to push in the rear carrier system without pulling the release lever again. 9 Warning It is only permissible to fit objects to the rear carrier system if [...]
-
Page 64
62 Storage Open out the lamp support on the back of the tail lamp completely until it engages. Push the clamping lever down and push the lamp support into the retainer until it engages. Perform this procedure for both tail lamps. Check the cable and lamp position to ensure these are correctly installed and are securely located. Lock the rear carrie[...]
-
Page 65
Storage 63 Remove the pedal crank mounts from the pedal crank recesses. Adapting the rear carrier system to a bicycle Press the release lever and withdraw the wheel recesses. Push the release lever on the strap retainer and remove the strap retainer. Prepare the bicycle for attachment Note The maximum width for the pedal crank is 38.3 mm and the ma[...]
-
Page 66
64 Storage Attaching a bicycle to the rear carrier system With the rotary lever on the pedal crank recess, roughly adapt the adjustable pedal crank unit to the protrusion of the pedal crank. If the bicycle has straight pedal cranks, unscrew the pedal crank unit completely (position 5 ). If the bicycle has curved pedal cranks, screw in the pedal cra[...]
-
Page 67
Storage 65 Attach the pedal crank by rotating the attachment screw on the pedal crank mount. Place the wheel recesses so that the bicycle is roughly horizontal. Here, the distance between the pedals and the tailgate should be at least 5 cm. Both bicycle tyres must be in the wheel recesses. Caution Ensure that the wheel recesses are pulled out as fa[...]
-
Page 68
66 Storage Tighten the attachment screw for the pedal bearing mount to its maximum point by hand. Secure both bicycle wheels to wheel recesses using strap retainers. Check the bicycle to ensure it is secure. Caution Ensure gap between bicycle and vehicle is at least 5 cm. If necessary, loosen handlebar and swivel sideways. The settings for the whee[...]
-
Page 69
Storage 67 Insert the strap retainer and pull tightly downwards as far as possible. Press release lever and slide in wheel recesses all the way as far as they will go. Disengage the locking lever on the diagonal support and fold both pedal crank recesses down. 9 Warning Risk of pinching. Swivel first the right clamping lever ( 1 ) forwards, followe[...]
-
Page 70
68 Storage Push the clamping lever down and pull both lamp supports out of the recesses. Fold in the lamp supports on the backs of the tail lamps. First place the front tail lamp ( 1 ), then the rear tail lamp ( 2 ) in the recesses and push down as far as possible. Push cables all the way into all guides in order to prevent damage. Open the tailgat[...]
-
Page 71
Storage 69 Pull the release handle on both sides, pull the backrest forwards to the vertical position and engage. When unlocking, a red marking appears next to the release lever. The backrest is properly engaged when the red marks on both sides near the release lever are no longer visible. Folding down rear backrests Remove load compartment cover a[...]
-
Page 72
70 Storage 9 Warning Only drive the vehicle when the backrests are securely locked into position. Otherwise there is a risk of personal injury or damage to the load or vehicle in the event of hard braking or a collision. The seat belt of the centre seat could be blocked when the backrest is folded up too quickly. To unlock the retractor, push in th[...]
-
Page 73
Storage 71 To remove the three other segments (order 1 to 3) lift at the rear, disengage, twist and remove. Fitting Install the segments in the order 3 to 1. Engage segments in recesses at the side. The segments overlap at the connecting points when they are closed. To install rear cover, engage cover in side guides and fold downwards. Attach retai[...]
-
Page 74
72 Storage In this position, if the rear seat backrests are folded forwards, an almost completely flat load bay is created. The double load-bay floor is able to withstand a load of no more than 100 kg. In the lower position, the double load-bay floor is able to withstand the maximum permissible load. General hint 9 Warning For safety reasons, stow [...]
-
Page 75
Storage 73 Warning triangle The warning triangle is stowed in the load compartment below the tailgate. First aid kit Stow the first-aid kit in the compartment in the left wall of the load compartment. To open the compartment, disengage cover and open it. Roof rack system Roof rack For safety reasons and to avoid damage to the roof, the vehicle appr[...]
-
Page 76
74 Storage Fitting on model with sunroof Disengage covers concealing roof rack mounts by pushing sliders in direction of arrow and remove upwards. To close roof rack mounts, first insert covers at front and engage sliders at rear. Attach roof rack at appropriate points, see enclosed roof rack system instructions. Loading information ● Heavy objec[...]
-
Page 77
Storage 75 9 Warning Always make sure that the load in the vehicle is securely stowed. Otherwise objects can be thrown around inside the vehicle and cause personal injury or damage to the load or vehicle. ● The payload is the difference between the permitted gross vehicle weight (see identification plate 3 241) and the EC kerb weight. To calculat[...]
-
Page 78
76 Instruments and controls Instruments and controls Controls ....................................... 77 Steering wheel adjustment ........ 77 Steering wheel controls ............. 77 Heated steering wheel ............... 77 Horn ........................................... 78 Windscreen wiper/washer ......... 78 Rear window wiper/washer ....... 80 [...]
-
Page 79
Instruments and controls 77 Controls Steering wheel adjustment Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary and steering wheel lock has been released. Steering wheel controls Cruise control, Speed limiter, Forward collision alert setting, Infotainment[...]
-
Page 80
78 Instruments and controls The highlighted grip areas of the steering wheel are heated quicker and to a higher temperature than the other areas. Heating is operational when the engine is running and during an Autostop. Stop-start system 3 139. Horn Press j . Windscreen wiper/washer Windscreen wiper HI : fast LO : slow INT : interval wiping or auto[...]
-
Page 81
Instruments and controls 79 Automatic wiping with rain sensor INT : automatic wiping with rain sensor The rain sensor detects the amount of water on the windscreen and automatically regulates the frequency of the windscreen wiper. If the wiper frequency is above 20 seconds, the wiper arm moves slightly down to the park position. Adjustable sensitiv[...]
-
Page 82
80 Instruments and controls Pull lever. Washer fluid is sprayed onto the windscreen and the wiper wipes a few times. Washer fluid 3 195 Rear window wiper/washer Press the rocker switch to activate the rear window wiper: upper position : continuous operation lower position : intermittent operation middle position : off Push lever. Washer fluid is sp[...]
-
Page 83
Instruments and controls 81 Illustration shows Colour-Info- Display. Uplevel-Display If outside temperature drops to 3 °C, a warning message is displayed in the Driver Information Centre. 9 Warning The road surface may already be icy even though the display indicates a few degrees above 0 °C. Clock Graphic-Info Display Press CONFIG to open the Se[...]
-
Page 84
82 Instruments and controls Set date Press the MENU-TUNE knob to enter the Set date submenu. Turn the MENU-TUNE knob to change the current value of the first setting. Press the MENU-TUNE knob to confirm the set value. The cursor then switches to the next value. If all values are set, you are automatically returned to the next higher menu level. Set[...]
-
Page 85
Instruments and controls 83 Set time and date To adjust the time and date settings, tap on the H and I screen buttons. RDS clock synchronization The RDS signal of most VHF transmitters automatically sets the time. RDS time synchronisation can take a few minutes. Some transmitters do not send a correct time signal. In such cases, it is recommended t[...]
-
Page 86
84 Instruments and controls Ashtrays Caution To be used only for ash and not for combustible rubbish. The portable ashtray can be placed in the cupholders. Warning lights, gauges and indicators Instrument cluster The needles of the instruments briefly rotate to the end position when the ignition is switched on. Speedometer Indicates vehicle speed. [...]
-
Page 87
Instruments and controls 85 Baselevel and Midlevel display To reset, press SET/CLR on the turn signal lever for a few seconds 3 97. Uplevel display Two trip odometer are selectable for different trips. Select menu Trip/Fuel Information Menu ; by pressing Menu on the turn signal lever. Turn adjuster wheel on turn signal lever and select Trip 1 or Tr[...]
-
Page 88
86 Instruments and controls Fuel gauge Number of LEDs displays the level in the fuel tank. 8 LEDs : fuel tank is full. The arrow indicates the vehicle side where the fuel filler flap is located. During liquid gas operation, the level in the gas tank is displayed. Control indicator Y illuminates if the level in the tank is low. Refuel immediately if[...]
-
Page 89
Instruments and controls 87 Engine coolant temperature gauge Number of LEDs displays the coolant temperature. up to 3 LEDs : engine operating temperature not yet reached 4 to 6 LEDs : normal operating temperature more than 6 LEDs : temperature too high Caution If engine coolant temperature is too high, stop vehicle, switch off engine. Danger to eng[...]
-
Page 90
88 Instruments and controls The remaining engine oil life duration is displayed in percent in the Driver Information Centre. Reset Press SET/CLR on turn signal lever for several seconds to reset. The remaining engine oil life duration menu must be active. Switch on ignition, but not the engine. The system must be reset every time the engine oil is [...]
-
Page 91
Instruments and controls 89 Control indicators in the instrument cluster[...]
-
Page 92
90 Instruments and controls Control indicators in the centre console Overview O Turn signal 3 90 X Seat belt reminder 3 91 v Airbag and belt tensioners 3 91 V Airbag deactivation 3 92 p Charging system 3 92 Z Malfunction indicator light 3 92 g Service vehicle soon 3 92 R Brake and clutch system 3 93 - Operate pedal 3 93 u Antilock brake system (ABS[...]
-
Page 93
Instruments and controls 91 Flashes A turn signal or the hazard warning flashers are activated. Rapid flashing: failure of a turn signal light or associated fuse. Bulb replacement 3 199, Fuses 3 207. Turn signals 3 120. Seat belt reminder Seat belt reminder on front seats X for driver's seat illuminates or flashes red in the tachometer. k for [...]
-
Page 94
92 Instruments and controls Deployment of the belt pretensioners or airbags is indicated by continuous illumination of v . 9 Warning Have the cause of the fault remedied immediately by a workshop. Belt pretensioners, airbag system 3 41, 3 44. Airbag deactivation V illuminates yellow. Illuminates for approx. 60 seconds after the ignition is switched[...]
-
Page 95
Instruments and controls 93 Brake and clutch system R illuminates red. The brake and clutch fluid level is too low, when manual parking brake is not applied 3 196. 9 Warning Stop. Do not continue your journey. Consult a workshop. Illuminates when the manual parking brake is applied and ignition is switched on 3 153. Operate pedal - illuminates or f[...]
-
Page 96
94 Instruments and controls Ultrasonic parking assist r illuminates yellow. Fault in system or Fault due to sensors that are dirty or covered by ice or snow or Interference due to external sources of ultrasound. Once the source of interference is removed, the system will operate normally. Have the cause of the fault in the system remedied by a work[...]
-
Page 97
Instruments and controls 95 Tyre pressure monitoring system w illuminates or flashes yellow. Illuminates Tyre pressure loss. Stop immediately and check tyre pressure. Flashes Fault in system or tyre without pressure sensor mounted (e.g. spare wheel). After 60-90 seconds the control indicator illuminates continuously. Consult a workshop. Tyre pressu[...]
-
Page 98
96 Instruments and controls The engine power is limited. Consult a workshop. Autostop Autostop active D illuminates red or white. Engine is in an Autostop. Stop-start system 3 139. Exterior light 8 illuminates green. The exterior lights are on 3 115. High beam C illuminates blue. Illuminated when high beam is on or during headlight flash 3 117. Hig[...]
-
Page 99
Instruments and controls 97 Information displays Driver Information Centre The Driver Information Centre is located in the instrument cluster. Depending on the version and equipment, the Driver Information Centre is available as Baselevel display, Midlevel display or Uplevel display. Following menus are selectable in the Driver Information Centre u[...]
-
Page 100
98 Instruments and controls Selectable menu pages of Midlevel display are: ● Trip/Fuel Information Menu menu, see description below ● Vehicle Information Menu menu, see description below Some of the displayed functions differ when the vehicle is being driven or at a standstill. Some functions are only available when the vehicle is being driven.[...]
-
Page 101
Instruments and controls 99 Trip/Fuel Information Menu Press MENU to select Trip/Fuel Information Menu information page ; . Turn the adjuster wheel to select a submenu. The following list contains all possible Trip/Fuel Information Menu pages. Some may not be available for your particular vehicle. Follow the instructions given in the submenus. ● [...]
-
Page 102
100 Instruments and controls When the tank must be refuelled immediately, a warning message appears and remains on the display. Additionally, control indicator Y flashes in the fuel gauge 3 95. Fuel range, LPG version Display of the approximate total fuel range for each fuel tank (LPG and petrol). A low fuel level in any tank is indicated by Low in[...]
-
Page 103
Instruments and controls 101 Selection and indication is different between Midlevel- and Uplevel- Display. Unit Press SET/CLR while page is displayed. Select imperial (unit 1) or metric (unit 3) by turning the adjuster wheel. Press SET/CLR to set the unit. Speed warning The speed warning function alerts the driver when a set speed is exceeded. To s[...]
-
Page 104
102 Instruments and controls Economy trend This page displays a graph of the last 10 recorded average fuel economy values per 100 km. Filled segments display the consumption in 5 km steps and shows the effect of topography or driving behaviour on fuel consumption. Graph can be reset by pressing SET/CLR . Economy index The current fuel consumption i[...]
-
Page 105
Instruments and controls 103 ● Infotainment system, see description in the Infotainment manual ● system messages ● vehicle messages 3 104 ● settings for vehicle personalisation 3 107 The type of information and how it is displayed depends on the settings made. Selecting menus and settings Menus and settings are selected via the touch screen[...]
-
Page 106
104 Instruments and controls Press CONFIG : Menu page Settings is displayed. Turn knob MENU-TUNE to select a setting or value. Press knob MENU-TUNE to confirm a setting or value. Press BACK to exit a menu or setting without changing or delete the last character in a character sequence. Press the button for a few seconds to delete the entire entry. [...]
-
Page 107
Instruments and controls 105 No. Vehicle message 9 Turn steering wheel, start engine again 12 Vehicle overloaded 13 Compressor overheated 15 Centre high-mounted brake light failure 16 Brake light failure 17 Headlight levelling malfunction 18 Left low beam failure 19 Rear fog light failure 20 Right low beam failure 21 Left sidelight failure 22 Right[...]
-
Page 108
106 Instruments and controls No. Vehicle message 94 Shift to park before exiting 95 Service airbag 128 Bonnet open 134 Park assist fault, clean bumper 136 Service parking assist 145 Check washer fluid level 174 Low vehicle battery 258 Park assist off Vehicle messages on Uplevel- Display The vehicle messages are displayed as text. Follow the instruc[...]
-
Page 109
Instruments and controls 107 ● If the reverse gear is engaged and the rear end carrier extended. ● If the diesel particle filter has reached the maximum filling level. When the vehicle is parked and/or the driver's door is opened ● With exterior lights on. During an Autostop ● If the driver's door is opened. Battery voltage Upleve[...]
-
Page 110
108 Instruments and controls The following settings can be selected: ● Languages ● Time Date ● Radio settings ● Phone settings ● Vehicle settings In the corresponding submenus, the following settings can be changed: Languages Selection of the desired language. Time Date Refer to 'Clock' 3 81. Radio settings Refer to Infotainment[...]
-
Page 111
Instruments and controls 109 Activates or deactivates and changes the duration of exit lighting. ● Power door locks Auto door lock : Activates or deactivates the automatic door locking function after switching on ignition. Stop door lock if door open : Activates or deactivates the door locking function while a door is open. Delayed door lock : Ac[...]
-
Page 112
110 Instruments and controls Radio settings Refer to Infotainment manual for further information. Connection settings Refer to Infotainment manual for further information. Vehicle settings ● Climate & air quality Auto fan speed : Modifies the level of the cabin airflow of the climate control in automatic mode. Air conditioning mode : Controls[...]
-
Page 113
Instruments and controls 111 unlocking without opening the vehicle. ● Vehicle factory settings : Restores the setting values back to the factory default settings. Language Selection of the desired language. Text scroll Refer to Infotainment manual for further information. Touch beep volume Refer to Infotainment manual for further information. Max[...]
-
Page 114
112 Instruments and controls Privacy button Press and hold j until an audio message is heard to activate or deactivate the transmission of the vehicle location. Press j to answer a call or to end a call to an OnStar advisor. Press j to access the Wi-Fi settings. OnStar button Press Z to establish a connection to an OnStar advisor. SOS button Press [...]
-
Page 115
Instruments and controls 113 The following functions are available: ● Lock or unlock doors. ● Honk horn or flash lights. ● Check fuel level, engine oil life and tyre pressure (only with tyre pressure monitoring system). ● Send navigation destination to the vehicle, if equipped with a built-in navigation system. ● Locate vehicle on a map. [...]
-
Page 116
114 Instruments and controls Press Z to call an OnStar advisor and describe the destination or point of interest. The OnStar advisor can look up any address or point of interest and directly download the destination to the built-in navigation system. OnStar settings OnStar PIN To have full access to all OnStar services, a four-digit PIN is required[...]
-
Page 117
Lighting 115 Lighting Exterior lighting .......................... 115 Light switch .............................. 115 Automatic light control ............. 116 High beam ............................... 117 Headlight flash ......................... 117 Headlight range adjustment .... 117 Headlights when driving abroad ..............................[...]
-
Page 118
116 Lighting Light switch with automatic light control Turn light switch: AUTO : automatic light control: headlights are switched on and off automatically depending on external lighting conditions m : activation or deactivation of the automatic light control. Switch turns back to AUTO 8 : sidelights 9 : headlights The current status of the automati[...]
-
Page 119
Lighting 117 High beam To switch from low to high beam, push lever. To switch to low beam, push lever again or pull. High beam assist 3 118. Headlight flash To activate the headlight flash, pull lever. Headlight range adjustment Manual headlight range adjustment To adapt headlight range to the vehicle load to prevent dazzling: turn thumb wheel ? to[...]
-
Page 120
118 Lighting set to right-hand traffic mode. Therefore, insert the key in the guide as shown in the illustration. Alternatively, a Phillips head screwdriver size three can be used for setting. To reset to left-hand traffic mode, turn adjuster elements 1 / 2 turn clockwise. Daytime running lights Daytime running light increases visibility of the veh[...]
-
Page 121
Lighting 119 The high beam assist is activated by pushing the indicator lever twice at a speed above 40 km/h. The green control indicator l illuminates continuously when the assist is activated, the blue one 7 illuminates when high beam is on. Control indicator l 3 96. Deactivation Push indicator lever once. It is also deactivated when front fog li[...]
-
Page 122
120 Lighting Turn and lane-change signals lever up : right turn signal lever down : left turn signal If the lever is moved past the resistance point, the turn signal is switched on constantly. When the steering wheel moves back, the turn signal is automatically deactivated. For three flashes, e.g. when changing lanes, press the lever until resistan[...]
-
Page 123
Lighting 121 Parking lights When the vehicle is parked, the parking lights on one side can be activated: 1. Switch off the ignition. 2. Move the turn signal lever all the way up (right parking lights) or down (left parking lights). Confirmed by an acoustic signal and the corresponding turn signal control indicator. Reversing lights The reversing li[...]
-
Page 124
122 Lighting Turn thumb wheel A and hold until the desired brightness is obtained. On vehicles with automatic light control, the brightness can only be adjusted when the exterior lights are on and the light sensor detects night conditions. Interior lights Front courtesy light Operate rocker switch: centre position w : automatic switching on when op[...]
-
Page 125
Lighting 123 Operate rocker switches: centre position : automatic switching on when opening a door. Turns off after a delay press I : permanently on press 0 : permanently off Dome light Spotlight incorporated in the inside mirror housing comes on when headlights are switched on. Dome light illuminates gear shifting console indirectly. Ambient light[...]
-
Page 126
124 Lighting The following lights will additionally switch on when the driver's door is opened: ● all switches ● Driver Information Centre Exit lighting The following lights switch on if the key is removed from the ignition switch: ● interior lights ● instrument panel light (only when it is dark) They will switch off automatically afte[...]
-
Page 127
Lighting 125 Switching off electric lights To prevent discharge of the vehicle battery when the ignition is switched off, some interior lights are switched off automatically after some time.[...]
-
Page 128
126 Climate control Climate control Climate control systems ............. 126 Heating and ventilation system 126 Air conditioning system ........... 127 Electronic climate control system .................................... 129 Air vents ..................................... 134 Adjustable air vents ................. 134 Fixed air vents ...........[...]
-
Page 129
Climate control 127 Demisting and defrosting the windows ● Set temperature control to warmest level. ● Set fan speed to highest speed. ● Set air distribution control to l . ● Switch on heated rear window Ü . ● Open side air vents as required and direct them towards door windows. ● For simultaneous warming of the foot well, set air dist[...]
-
Page 130
128 Climate control Cooling n Press n to switch on cooling. Activation is indicated by illumination of the LED in the button. Cooling is only functional when the engine is running and climate control fan is switched on. Press n again to switch off cooling. The air conditioning system cools and dehumidifies (dries) as soon as the outside temperature[...]
-
Page 131
Climate control 129 ● Switch on cooling n . ● Air recirculation system 4 on. ● Set temperature control to coldest level. ● Set fan speed to highest level. ● Set air distribution control to M . ● Open all vents. Demisting and defrosting the windows l ● Set temperature control to warmest level. ● Set fan speed to highest level. ● Se[...]
-
Page 132
130 Climate control Controls for: ● fan speed ● temperature ● air distribution n : cooling AUTO : automatic mode 4 : manual air recirculation V : demisting and defrosting Ü : heated rear window 3 33 Heated windscreen 3 34. Heated seats ß 3 40. Heated steering wheel * 3 77. In Automatic mode, temperature, fan speed and air distribution are r[...]
-
Page 133
Climate control 131 If the minimum temperature Lo is set, the climate control system runs at maximum cooling, if cooling n is switched on. If the maximum temperature Hi is set, the climate control system runs at maximum heating. Note If n is switched on, reducing the set cabin temperature can cause the engine to restart from an Autostop or inhibit [...]
-
Page 134
132 Climate control Fan speed Z Turn left rotary knob to decrease or increase fan speed. The fan speed is indicated in the Info-Display. Turning knob to $ : fan and cooling are switched off. To return to Automatic mode: Press AUTO . Air distribution Turn right rotary knob for desired adjustment. Setting is indicated in the Info-Display. K : to foot[...]
-
Page 135
Climate control 133 If no cooling or drying is required, switch off the cooling system for fuel saving reasons. When the cooling system is switched off, no engine restart will be requested by the climate control system during an Autostop. Exception: defrost system is activated and outside temperature above 0 °C requests a restart. The status of co[...]
-
Page 136
134 Climate control Air vents Adjustable air vents At least one air vent must be open while the cooling is on. Adjust the air amount at the vent outlet by turning the adjuster wheel. The vent is closed when the adjuster wheel is turned close to the left or right. Direct the flow of air by tilting and swivelling the slats. 9 Warning Do not attach an[...]
-
Page 137
Climate control 135 Air conditioning regular operation In order to ensure continuously efficient performance, cooling must be operated for a few minutes once a month, irrespective of the weather and time of year. Operation with cooling is not possible when the outside temperature is too low. Service For optimal cooling performance, it is recommende[...]
-
Page 138
136 Driving and operating Driving and operating Driving hints ............................... 137 Control of the vehicle ............... 137 Starting and operating ............... 137 New vehicle running-in ............ 137 Ignition switch positions ........... 137 Retained power off .................. 138 Starting the engine .................. 138[...]
-
Page 139
Driving and operating 137 Driving hints Control of the vehicle Never coast with engine not running Many systems will not function in this situation (e.g. brake servo unit, power steering). Driving in this manner is a danger to yourself and others. All systems function during an Autostop. Stop-start system 3 139. Idle boost If charging of the vehicl[...]
-
Page 140
138 Driving and operating 0 : ignition off: Some functions remain active until key is removed or driver's door is opened, provided the ignition was on previously 1 : accessory power mode: Steering wheel lock released, some electrical functions are operable, ignition is off 2 : ignition on power mode: Ignition is on, diesel engine is preheating[...]
-
Page 141
Driving and operating 139 Turn key briefly to position 3 and release: an automatic procedure operates the starter after a brief delay, until the engine is running. See 'Automatic Starter Control'. Before restarting or to switch off the engine, turn the key back to position 0 . During an Autostop, the engine can be started by depressing th[...]
-
Page 142
140 Driving and operating On vehicles with manual transmission automated, the engine is started automatically as soon as the brake pedal is released. A vehicle battery sensor ensures that an Autostop is only performed if the vehicle battery is sufficiently charged for a restart. Activation The stop-start system is available as soon as the engine is[...]
-
Page 143
Driving and operating 141 ● The engine exhaust temperature is not too high, e.g. after driving with high engine load. ● The ambient temperature is above -5 °C. ● The climate control system allows an Autostop. ● The brake vacuum is sufficient. ● The self-cleaning function of the diesel particle filter is not active. ● The vehicle was dr[...]
-
Page 144
142 Driving and operating ● The brake vacuum is not sufficient. ● The vehicle is driven at least at walking speed. ● The climate control system requests an engine start. ● The air conditioning is manually switched on. If the bonnet is not fully closed, a warning message is displayed in the Driver Information Centre. If an electrical accesso[...]
-
Page 145
Driving and operating 143 Note In the event of an accident with airbag deployment, the engine is switched off automatically if the vehicle comes to a standstill within a certain time. Engine exhaust 9 Danger Engine exhaust gases contain poisonous carbon monoxide, which is colourless and odourless and could be fatal if inhaled. If exhaust gases ente[...]
-
Page 146
144 Driving and operating % flashes when diesel particle filter has reached the maximum filling level. Start cleaning process immediately to avoid damage to the engine. Cleaning process To activate cleaning process, continue driving, keep engine speed above 2000 revolutions per minute. Shift down if necessary. Diesel particle filter cleaning is the[...]
-
Page 147
Driving and operating 145 In automatic mode, the driving programme is indicated by D in the Driver Information Centre. In manual mode, M and the number of the selected gear is indicated. R indicates reverse gear. N indicates neutral position. P indicates park position. Selector lever P : park position, wheels are locked, engage only when the vehicl[...]
-
Page 148
146 Driving and operating Rocking the vehicle Rocking the vehicle is only permissible if the vehicle is stuck in sand, mud or snow. Move the selector lever between D and R in a repeat pattern. Do not race the engine and avoid sudden acceleration. Parking Apply the parking brake and engage P . The ignition key can only be removed when the selector l[...]
-
Page 149
Driving and operating 147 Fault In the event of a fault, control indicator g illuminates. Additionally, a message is displayed in the Driver Information Centre. Vehicle messages 3 104. The transmission no longer shifts automatically. Continued travel is possible with manual shifting. Only the highest gear is available. Depending on the fault, 2nd g[...]
-
Page 150
148 Driving and operating Manual transmission To engage reverse, depress the clutch pedal and then press the release button on the selector lever and engage the gear. If the gear does not engage, set the lever to neutral, release the clutch pedal and depress again; then repeat gear selection. Do not slip the clutch unnecessarily. When operating, de[...]
-
Page 151
Driving and operating 149 Transmission display In automatic mode, the driving programme is indicated by D in the Driver Information Centre. In manual mode, M and the number of the selected gear is indicated. R indicates reverse gear. N indicates neutral. Starting the engine To start the engine, depress the brake pedal, if transmission is not in pos[...]
-
Page 152
150 Driving and operating N : neutral position D/M : switch between automatic (D) and manual (M) shift mode. The transmission display shows either D or M with the selected gear < : upshifting in manual mode ] : downshifting in manual mode R : reverse gear. Engage only when vehicle is stationary If selector lever is moved from R to the left, D is[...]
-
Page 153
Driving and operating 151 Tyre pressure monitoring system To start the sensor matching process of the tyre pressure monitoring system, the selector lever must be moved and held in position N for five seconds. P illuminates in the transmission display to indicate that the sensor matching process can be started. Tyre pressure monitoring system 3 214.[...]
-
Page 154
152 Driving and operating Brakes The brake system comprises two independent brake circuits. If a brake circuit fails, the vehicle can still be braked using the other brake circuit. However, braking effect is achieved only when the brake pedal is depressed firmly. Considerably more force is needed for this. The braking distance is extended. Seek the[...]
-
Page 155
Driving and operating 153 Parking brake Manual parking brake 9 Warning Always apply parking brake firmly without operating the release button, and apply as firmly as possible on a downhill or uphill slope. To release the parking brake, pull the lever up slightly, press the release button and fully lower the lever. To reduce the operating forces of [...]
-
Page 156
154 Driving and operating Ride control systems Traction Control system The Traction Control system (TC) is a component of the Electronic Stability Control (ESC). TC improves driving stability when necessary, regardless of the type of road surface or tyre grip, by preventing the drive wheels from spinning. As soon as the drive wheels starts to spin,[...]
-
Page 157
Driving and operating 155 Electronic Stability Control Electronic Stability Control (ESC) improves driving stability when necessary, regardless of the type of road surface or tyre grip. As soon as the vehicle starts to swerve (understeer/oversteer), engine output is reduced and the wheels are braked individually. ESC operates in combination with th[...]
-
Page 158
156 Driving and operating Fault If there is a fault in the system, the control indicator b illuminates continuously and a message or a warning code appears in the Driver Information Centre. The system is not operational. Have the cause of the fault remedied by a workshop. City mode City mode is a feature which enables increased steering assistance [...]
-
Page 159
Driving and operating 157 off. In this case, switch on ignition and turn steering wheel once from lock to lock. If control indicators c and b do not extinguish after calibration, seek the assistance of a workshop. Driver assistance systems 9 Warning Driver assistance systems are developed to support the driver and not to replace the driver's a[...]
-
Page 160
158 Driving and operating Press m ; control indicator m in instrument cluster illuminates white. Activation Accelerate to the desired speed and turn thumb wheel to SET/- , the current speed is stored and maintained. Control indicator m in instrument cluster illuminates green. Accelerator pedal can be released. Vehicle speed can be increased by depr[...]
-
Page 161
Driving and operating 159 Pressing L to activate the speed limiter or switching off the ignition also switches off cruise control and deletes the stored speed. Speed limiter The speed limiter prevents the vehicle exceeding a preset maximum speed. The maximum speed can be set at a speed above 25 km/h. The driver can only accelerate up to the preset [...]
-
Page 162
160 Driving and operating Deactivation Press y : speed limiter is deactivated and the vehicle can be driven without speed limit. The limited speed will be stored and is indicated in brackets in the Driver Information Centre. Additionally, a corresponding message appears. Resume limit speed Turn thumb wheel to RES/+ . The stored speed limit will be [...]
-
Page 163
Driving and operating 161 Alerting the driver The vehicle ahead control indicator A illuminates green in the instrument cluster when the system has detected a vehicle in the driving path. When the distance to a preceding moving vehicle becomes too small or when approaching another vehicle too rapidly and a collision is imminent, a red LED warning l[...]
-
Page 164
162 Driving and operating The complete attention of the driver is always required while driving. The driver must always be ready to take action and apply the brakes. System limitations The system is designed to warn of vehicles only, but may react also to other objects. In the following cases, forward collision alert may not detect a vehicle ahead [...]
-
Page 165
Driving and operating 163 The system has four ultrasonic parking sensors in the rear bumper. Activation When reverse gear is engaged, the system is ready to operate automatically. An illuminated LED in the parking assist button r indicates that the system is ready to operate. Indication The system warns the driver with acoustic signals against pote[...]
-
Page 166
164 Driving and operating Control indicator r illuminates in the instrument cluster 3 94 or a message is indicated in the Driver Information Centre. Front-rear parking assist 9 Warning The driver bears full responsibility for the parking manoeuvre. Always check the surrounding area when driving backwards or forwards while using parking assist syste[...]
-
Page 167
Driving and operating 165 When the system is deactivated, the LED in the button extinguishes and Park Assist Off pops-up in the Driver Information Centre. Indication The system warns the driver with acoustic signals against potentially hazardous obstacles behind the vehicle in a distance range up to 1.5 metres and in front up to 1.2 metres. Dependi[...]
-
Page 168
166 Driving and operating Fault In the event of a fault or if the system does not work temporarily, e.g. because of high external noise level or other interference factors, a message pops-up in the Driver Information Centre. Vehicle messages 3 104. Advanced parking assist 9 Warning The driver bears full responsibility for accepting the parking slot[...]
-
Page 169
Driving and operating 167 ● If advanced parking assist is active and the system is in park guiding mode, a brief press deactivates advanced parking assist. ● If advanced parking assist is active, a long press deactivates advanced parking assist and front-rear parking assist. ● If forward gear or neutral is selected, a brief press activates or[...]
-
Page 170
168 Driving and operating The distance to rear and front obstacles is displayed by changing distance lines in the Driver Information Centre 3 97. The distance indication can be inhibited by vehicle messages with a higher priority. After approving the message by pressing SET/CLR on the turn signal lever, distance indication appears again. The distan[...]
-
Page 171
Driving and operating 169 Functionality Parking slot searching mode Vehicles with indication in the Driver Information Centre Select parallel or perpendicular parking slot in Driver Information Centre by pressing SET/CLR . When a slot is detected, visual feedback in the Driver Information Centre and an acoustic signal is given. Vehicles with indica[...]
-
Page 172
170 Driving and operating When a slot is detected, a visual feedback on the Colour-Info-Display and an acoustic signal is given. If the driver does not stop the vehicle within ten metres for parallel parking slots or six metres for perpendicular parking slots after a parking slot is proposed, the system starts to search for another suitable parking[...]
-
Page 173
Driving and operating 171 Display priorities Advanced parking assist indication in the Driver Information Centre can be inhibited by vehicle messages with a higher priority. After approving the message by pressing SET/CLR on the turn signal lever, advanced parking assist instructions appear again and the parking manoeuvre can be continued. Deactiva[...]
-
Page 174
172 Driving and operating correct distance indication in the upper part of these vehicles cannot be guaranteed. Objects with a very small reflection cross-section, e.g. objects of narrow size or soft materials, may not be detected by the system. Parking assist systems do not detect objects outside the detection range. Note It is possible that the s[...]
-
Page 175
Driving and operating 173 When the system detects a vehicle in the side blind zone while driving forward, either while passing a vehicle or being passed, a yellow warning symbol B will illuminate in the relevant exterior mirror. If the driver then activates the turn signal, the warning symbol B starts flashing yellow as a warning not to change lane[...]
-
Page 176
174 Driving and operating 9 Warning The rear view camera does not replace driver vision. Note that objects that are outside the camera's field of view and the advanced parking assist sensors, e.g. below the bumper or underneath the vehicle, are not displayed. Do not reverse the vehicle by only looking at the Info-Display and check the surround[...]
-
Page 177
Driving and operating 175 Fault Fault messages are displayed with a 9 on the top line of the Info-Display. The rear view camera may not operate properly when: ● The surrounding is dark. ● The sun or the beam of headlights is shining directly into the camera lens. ● Ice, snow, mud, or anything else covers the camera lens. Clean the lens, rinse[...]
-
Page 178
176 Driving and operating An exclamation mark in a frame indicates that there is an additional sign detected which cannot be recognised by the system. The system is active up to a speed of 200 km/h depending on the lighting conditions. As soon as vehicle speed becomes slower than 55 km/h, the display will be reset and the content of the traffic sig[...]
-
Page 179
Driving and operating 177 The alert function can be activated or deactivated in the setting menu of the traffic sign assistant page by pressing SET/CLR on the turn signal lever. Once setting page is displayed, select Alerts ON to activate pop-up alert. Deactivate by selecting Alerts OFF . When switching on the ignition, alert function is deactivate[...]
-
Page 180
178 Driving and operating signs. Do not ignore traffic signs which are not displayed by the system. The system does not discern any other than the conventional traffic signs that might give or end a speed limit. Do not let this special feature tempt you into taking risks when driving. Always adapt speed to the road conditions. The driver assistance[...]
-
Page 181
Driving and operating 179 Fault The lane departure warning system may not operate properly when: ● The windscreen is not clean. ● There are adverse environmental conditions e.g. heavy rain, snow, direct sunlight or shadows. The system can not operate when no lane marking is detected. Fuel Fuel for petrol engines Only use unleaded fuel that comp[...]
-
Page 182
180 Driving and operating Fuel for liquid gas operation Liquid gas is known as LPG (Liquefied Petroleum Gas) or under its French name GPL (Gaz de Pétrole Liquéfié). LPG is also known as Autogas. LPG consists mainly of propane and butane. The octane rating is between 105 and 115, depending on the butane proportion. LPG is stored liquid at around [...]
-
Page 183
Driving and operating 181 Fill the tank completely at regular intervals to prevent corrosion in the tank. Faults and remedies If gas mode is not possible, check the following: ● Is there enough liquid gas present? ● Is there enough petrol present for starting? Due to extreme temperatures in combination with the gas composition, it may take slig[...]
-
Page 184
182 Driving and operating 9 Danger Fuel is flammable and explosive. No smoking. No naked flames or sparks. If you can smell fuel in your vehicle, have the cause of this remedied immediately by a workshop. Caution In case of misfuelling, do not switch on ignition. Fuel filler flap is located at right rear side of the vehicle. The fuel filler flap ca[...]
-
Page 185
Driving and operating 183 Unscrew protective cap from the filler neck. Screw the required adapter hand- tight onto the filler neck. ACME Adapter: Screw the nut of the filling nozzle onto the adapter. Press locking lever on filler nozzle down. DISH filler neck: Place the filler nozzle into the adapter. Press locking lever on filler nozzle down. Bayo[...]
-
Page 186
184 Driving and operating ACME adapter: Belgium, Germany, Ireland, Luxembourg, Switzerland Bayonet adapter: Netherlands, Norway, Spain, United Kingdom EURO adapter: Spain DISH adapter: Bosnia-Herzegovina, Bulgaria, Denmark, Estonia, France, Greece, Italy, Croatia, Latvia, Lithuania, Macedonia, Austria, Poland, Portugal, Romania, Sweden, Switzerland[...]
-
Page 187
Driving and operating 185 General information The official fuel consumption and specific CO 2 emission figures quoted relate to the EU base model with standard equipment. Fuel consumption data and CO 2 emission data are determined according to regulation R (EC) No. 715/2007 (in the latest applicable version), taking into consideration the vehicle w[...]
-
Page 188
186 Driving and operating Trailer towing Trailer loads The permissible trailer loads are vehicle and engine-dependent maximum values which must not be exceeded. The actual trailer load is the difference between the actual gross weight of the trailer and the actual coupling socket load with the trailer coupled. The permissible trailer loads are spec[...]
-
Page 189
Driving and operating 187 General If the permitted rear axle load is exceeded a maximum speed of 100 km/h applies. If lower national maximum speeds are specified for trailer operation, they must be complied with. Towing equipment Caution When operating without a trailer, remove the coupling ball bar. Stowage of coupling ball bar The coupling ball b[...]
-
Page 190
188 Driving and operating Otherwise, the coupling ball bar must be tensioned before it is inserted into the coupling housing: ● Place the key in the lock and unlock the coupling ball bar. ● Push the rotary knob onto the coupling ball bar and rotate right while pressed down until it engages. The key remains in the lock. Inserting the coupling ba[...]
-
Page 191
Driving and operating 189 Eye for break-away stopping cable Attach breakaway stopping cable to eye. Check that the coupling ball bar is correctly installed ● Green marking on rotary knob is visible. ● There must be no gap between the rotary knob and the coupling ball bar. ● The coupling ball bar must be firmly engaged in the opening. ● The [...]
-
Page 192
190 Vehicle care Vehicle care General Information ................... 191 Accessories and vehicle modifications .......................... 191 Vehicle storage ........................ 191 End-of-life vehicle recovery ..... 191 Vehicle checks ........................... 192 Performing work ...................... 192 Bonnet ..........................[...]
-
Page 193
Vehicle care 191 General Information Accessories and vehicle modifications We recommend the use of genuine parts and accessories and factory approved parts specific for your vehicle type. We cannot assess or guarantee reliability of other products - even if they have a regulatory or otherwise granted approval. Do not make any modifications to the e[...]
-
Page 194
192 Vehicle care Gas vehicles must be recycled by a service centre authorised for gas vehicles. Vehicle checks Performing work 9 Warning Only perform engine compartment checks when the ignition is off. The cooling fan may start operating even if the ignition is off. 9 Danger The ignition system and Xenon headlights use extremely high voltage. Do no[...]
-
Page 195
Vehicle care 193 Push the safety catch upwards and open the bonnet. Secure the bonnet support. If the bonnet is opened during an Autostop, the engine will be restarted automatically for safety reasons. Closing Before closing the bonnet, press the support into the holder. Lower the bonnet and allow it to fall into the latch from a low height (20-25 [...]
-
Page 196
194 Vehicle care We recommend the use of the same grade of engine oil that was used at the last change. The engine oil level must not exceed the MAX mark on the dipstick. Caution Overfilled engine oil must be drained or suctioned out. Capacities 3 252, Engine oil quality/ viscosity 3 238. Fit the cap on straight and tighten it. Engine coolant The c[...]
-
Page 197
Vehicle care 195 If the cooling system is cold, the coolant level should be above the filling line mark. Top-up if the level is low. 9 Warning Allow the engine to cool before opening the cap. Carefully open the cap, relieving the pressure slowly. To top-up, use a 1:1 mixture of released coolant concentrate mixed with clean tap water. If no coolant [...]
-
Page 198
196 Vehicle care Brakes In the event of minimum thickness of the brake lining, a squealing noise sounds during braking. Continued driving is possible but have the brake lining replaced as soon as possible. Once new brake linings are installed, do not brake unnecessarily hard for the first few journeys. Brake fluid 9 Warning Brake fluid is poisonous[...]
-
Page 199
Vehicle care 197 When the vehicle battery is being replaced, please ensure that there are no open ventilation holes in the vicinity of the positive terminal. If a ventilation hole is open in this area, it must be closed off with a dummy cap, and the ventilation in the vicinity of the negative terminal must be opened. Only use batteries that allow t[...]
-
Page 200
198 Vehicle care ● See the Owner's manual for further information. ● Explosive gas may be present in the vicinity of the battery. Diesel fuel system bleeding If the tank has been run dry, the diesel fuel system must be bled. Switch on the ignition three times for 15 seconds at a time. Then crank the engine for a maximum of 40 seconds. Repe[...]
-
Page 201
Vehicle care 199 Bulb replacement Switch off the ignition and switch off the relevant switch or close the doors. Only hold a new bulb at the base! Do not touch the bulb glass with bare hands. Use only the same bulb type for replacement. Replace headlight bulbs from within the engine compartment. Bulb check After a bulb replacement switch on the ign[...]
-
Page 202
200 Vehicle care 2. Press the clip to disengage bulb holder. Withdraw the bulb holder from the reflector. 3. Detach the bulb from the bulb holder and replace the bulb. 4. Insert the bulb holder with the clip downwards and engage into the reflector until it clicks. 5. Install cap. High beam 1. Rotate the cap (3) anticlockwise and remove it. 2. Press[...]
-
Page 203
Vehicle care 201 Sidelight/daytime running light with bulbs 1. Rotate bulb socket (1) anticlockwise to disengage. 2. Press both clips together and withdraw the bulb socket from the headlamp housing. 3. Remove the bulb from the socket by pulling. 4. Replace and insert new bulb into socket. 5. Insert the bulb socket into the headlamp housing and turn[...]
-
Page 204
202 Vehicle care Corner lighting 1. Rotate the cap (3) anticlockwise and remove it. 2. Rotate the bulb holder anticlockwise to disengage. Withdraw the bulb holder from the reflector. 3. Remove the bulb from the plug connector by disengaging and pulling. 4. Replace the bulb. Connect and engage bulb holder with the plug connector. 5. Insert the bulb [...]
-
Page 205
Vehicle care 203 2. Disengage the bulb socket from the plug connector by pressing the retaining lug. 3. Remove and replace the bulb socket with bulb and attach the plug connector. 4. Insert the bulb socket into the reflector by turning clockwise and engage. Front turn signal lights Front turn signal lights consist of long- life bulbs which cannot b[...]
-
Page 206
204 Vehicle care 4. Press the retaining lugs and remove the bulb carrier from the light assembly. 5. Remove and replace the bulb by pushing the bulb slightly into the socket and rotating anticlockwise: Tail light/Brake light ( 1 ) Turn signal light ( 2 ) 6. Insert and turn bulb clockwise into the tail light assembly. Fit light assembly with the ret[...]
-
Page 207
Vehicle care 205 4. Remove the bulb by pushing slightly into the socket and rotating anticlockwise. Replace the bulb. 5. Insert the bulb socket into the assembly and turn to secure. 6. Attach light assembly into the tailgate and secure with the screw. Side turn signal lights To replace bulb, remove lamp housing: 1. Slide lamp to its left side and r[...]
-
Page 208
206 Vehicle care 4. Insert bulb holder and turn clockwise. 5. Insert left end of the lamp, slide to the left and insert right end. Centre high-mounted brake light Have LEDs replaced by a workshop. Number plate light 1. Insert screwdriver in recess of the cover, press to the side and release spring. 2. Remove lamp downwards, taking care not to pull [...]
-
Page 209
Vehicle care 207 Electrical system Fuses Data on the replacement fuse must match the data on the defective fuse. There are two fuse boxes in the vehicle: ● in the front left of the engine compartment ● in left-hand drive vehicles, behind the light switch, or, in right-hand drive vehicles, behind the glovebox Before replacing a fuse, turn off th[...]
-
Page 210
208 Vehicle care Engine compartment fuse box The fuse box is in the front left of the engine compartment. Disengage the cover and fold it upwards until it stops. Remove the cover vertically upwards. No. Circuit 1 Trailer interface module, rear carrier system 2 - 3 Battery sensor 4 Chassis control module fuel pump 5 ABS 6 Low beam and Daytime runnin[...]
-
Page 211
Vehicle care 209 No. Circuit 14 Heated exterior mirror 15 – 16 Brake booster kit 17 Ignition, crank power supply 18 Engine control module 19 Fuel pump 20 – 21 Engine solenoids, engine sensors 22 – 23 Injection system 24 Washer system 25 – 26 Engine sensors 27 Heater shut off valve 28 Engine control module 29 Engine control module No. Circui[...]
-
Page 212
210 Vehicle care No. Circuit 1 ABS pump 2 Front wiper 3 Blower 4 Instrument panel 5 – 6 Diesel fuel heater 7 Transmission 8 Cooling fan low 9 Cooling fan high 10 Cooling fan 11 Starter After having changed defective fuses close the fuse box cover and press until it engages. If the fuse box cover is not closed correctly, malfunction may occur. Ins[...]
-
Page 213
Vehicle care 211 No. Circuit 1 – 2 – 3 Power windows 4 Voltage transformer 5 Body control module 1 6 Body control module 2 7 Body control module 3 8 Body control module 4 9 Body control module 5 10 Body control module 6 11 Body control module 7 12 Body control module 8 13 – 14 Tailgate 15 Airbag system 16 Data link connection 17 Ignition No. [...]
-
Page 214
212 Vehicle care Vehicle tools Tools Vehicles with tyre repair kit The tools are located together with the towing eye and tyre repair kit in the load compartment below the floor cover. On OPC or LPG version or versions with rear carrier system or double load-bay floor, the tools are located together with the towing eye and tyre repair kit on the ri[...]
-
Page 215
Vehicle care 213 Wheels and tyres Tyre condition, wheel condition Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking. Regularly check the wheels for damage. Seek the assistance of a workshop in the event of damage or unusual wear. We recommend[...]
-
Page 216
214 Vehicle care Tyre pressure 3 253. The tyre pressure information label on the right door frame indicates the original equipment tyres and the correspondent tyre pressures. The tyre pressure data refers to cold tyres. It applies to summer and winter tyres. The ECO tyre pressure serves to achieve the smallest amount of fuel consumption possible. I[...]
-
Page 217
Vehicle care 215 All wheels must be equipped with pressure sensors and the tyres must have the prescribed pressure. Note In countries where the tyre pressure monitoring system is legally required, the use of wheels without pressure sensors will invalidate the vehicle type approval. The current tyre pressures can be shown in the Vehicle Information [...]
-
Page 218
216 Vehicle care A detected low tyre pressure condition is indicated by the control indicator w 3 95. If w illuminates, stop as soon as possible and inflate the tyres as recommended 3 253. If w flashes for 60-90 seconds then illuminates continuously, there is a fault in the system. Consult a workshop. After inflating, some driving may be required t[...]
-
Page 219
Vehicle care 217 Select ● LO for comfort pressure up to three people. ● ECO for Eco pressure up to three people. ● Hi for full loading. Uplevel display: Select ● Light for comfort pressure up to three people. ● Eco for Eco pressure up to three people. ● Max for full loading. Tyre pressure sensor matching process Each TPMS sensor has a u[...]
-
Page 220
218 Vehicle care Baselevel display and Midlevel display: Uplevel display: 6. Press SET/CLR to begin the sensor matching process. A message requesting acceptance of the process should be displayed. 7. Press SET/CLR again to confirm the selection. The horn sounds twice to indicate that the receiver is in relearn mode. 8. Start with the left side fron[...]
-
Page 221
Vehicle care 219 The legally permissible minimum tread depth (1.6 mm) has been reached when the tread has worn down as far as one of the tread wear indicators (TWI). Their position is indicated by markings on the sidewall. Tyres age, even if they are not used. We recommend tyre replacement every six years. Changing tyre and wheel size If tyres of a[...]
-
Page 222
220 Vehicle care Tyre chains Tyre chains are only permitted on the front wheels. Always use fine mesh chains that add no more than 10 mm to the tyre tread and the inboard sides (including chain lock). 9 Warning Damage may lead to tyre blowout. Tyre chains are permitted on tyres of size 175/70 R14, 185/70 R14, 185/65 R15, 205/45 R17. Tyre chains are[...]
-
Page 223
Vehicle care 221 3. Remove the electrical connection cable and air hose from the stowage compartments on the underside of the compressor. 4. Screw the compressor air hose to the connection on the sealant bottle. 5. Fit the sealant bottle into the retainer on the compressor. Set the compressor near the tyre in such a way that the sealant bottle is u[...]
-
Page 224
222 Vehicle care 13. The prescribed tyre pressure should be obtained within ten minutes. Tyre pressure 3 253. When the correct pressure is obtained, switch off the compressor. If the prescribed tyre pressure is not obtained within ten minutes, remove the tyre repair kit. Move the vehicle one tyre rotation. Reattach the tyre repair kit and continue [...]
-
Page 225
Vehicle care 223 Vehicles with tyre repair kit in the sidewall To open the compartment, disengage the cover and open it. 1. Take the sealant bottle and bracket with air hose from the insert. 2. Detach air hose from bracket and screw onto sealant bottle connection. 3. Position the sealant bottle on the bracket. Make sure that the bottle does not fal[...]
-
Page 226
224 Vehicle care 5. Screw tyre inflation hose to valve. 6. Screw air hose onto compressor connection. 7. Switch on ignition. To avoid discharging the battery, we recommend running the engine. 8. Press on/off switch on the compressor. The tyre is filled with sealant. 9. The compressor pressure gauge briefly indicates up to six bar whilst the sealant[...]
-
Page 227
Vehicle care 225 General information Note The driving characteristics of the repaired tyre are severely affected, therefore have this tyre replaced. If unusual noise is heard or the compressor becomes hot, turn compressor off for at least 30 minutes. The built-in safety valve opens at a pressure of seven bar. Note the expiry date of the kit. After [...]
-
Page 228
226 Vehicle care Alloy wheels with centre cap: Insert extractor in the open slot of the centre cap and withdraw the cap from the wheel. Vehicle tools 3 212. 2. Install the wheel wrench ensuring that it locates securely and loosen each wheel bolt by half a turn. The wheels might be protected by locking wheel bolts. To loosen these specific bolts, fi[...]
-
Page 229
Vehicle care 227 Attach jack handle and with the jack correctly aligned rotate handle until wheel is clear of the ground. 5. Unscrew the wheel bolts. 6. Change the wheel. 7. Screw on the wheel bolts. 8. Lower vehicle. 9. Install the wheel wrench ensuring that it locates securely and tighten each bolt in a crosswise sequence. Tightening torque is 11[...]
-
Page 230
228 Vehicle care Caution The use of a spare wheel that is smaller than the other wheels or in combination with winter tyres could affect driveability. Have the defective tyre replaced as soon as possible. 3-door/5-door hatchback The spare wheel is located in the load compartment beneath the floor covering. It is secured with a wing nut. Fitting a d[...]
-
Page 231
Vehicle care 229 Temporary spare wheel Caution The use of the temporary spare wheel could affect driveability. Have the defective tyre renewed or repaired as soon as possible. Only mount one temporary spare wheel. The permissible maximum speed on the label on the temporary spare wheel is only valid for the factory-fitted tyre size. If your vehicle [...]
-
Page 232
230 Vehicle care ● A discharged vehicle battery can already freeze at a temperature of 0 °C. Defrost the frozen battery before connecting jump leads. ● Wear eye protection and protective clothing when handling a battery. ● Use a booster battery with the same voltage (12 Volts). Its capacity (Ah) must not be much less than that of the dischar[...]
-
Page 233
Vehicle care 231 4. Switch on electrical consumers (e.g. headlights, heated rear window) of the vehicle receiving the jump start. 5. Reverse above sequence exactly when removing leads. Towing Towing the vehicle Insert a screwdriver in the slot at the lower part of the cap. Release the cap by carefully moving the screwdriver downwards. The towing ey[...]
-
Page 234
232 Vehicle care Caution Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. When the engine is not running, considerably more force is needed to brake and steer. To prevent the entry of exhaust gases from the towing vehicle, switch on the air recirculation and close the windows. Vehicles with automatic transmission[...]
-
Page 235
Vehicle care 233 Caution Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. After towing, unscrew the towing eye. Insert cap at the top and engage downwards. Appearance care Exterior care Locks The locks are lubricated at the factory using a high quality lock cylinder grease. Use a de-icing agent only when absolute[...]
-
Page 236
234 Vehicle care Thoroughly rinse and leather-off the vehicle. Rinse leather frequently. Use separate leathers for painted and glass surfaces: remnants of wax on the windows will impair vision. Do not use hard objects to remove spots of tar. Use tar removal spray on painted surfaces. Exterior lights Headlight and other light covers are made of plas[...]
-
Page 237
Vehicle care 235 Paintwork damage Rectify minor paintwork damage with a touch-up pen before rust forms. Have more extensive damage or rust areas repaired by a workshop. Underbody Some areas of the vehicle underbody have a PVC undercoating while other critical areas have a durable protective wax coating. After the underbody is washed, check the unde[...]
-
Page 238
236 Vehicle care Caution Close Velcro fasteners as open Velcro fasteners on clothing could damage seat upholstery. The same applies to clothing with sharp-edged objects, like zips or belts or studded jeans. Plastic and rubber parts Plastic and rubber parts can be cleaned with the same cleaner as used to clean the body. Use interior cleaner if neces[...]
-
Page 239
Service and maintenance 237 Service and maintenance General information ................... 237 Service information .................. 237 Recommended fluids, lubricants and parts .................................... 238 Recommended fluids and lubricants ................................ 238 General information Service information In order to ensure[...]
-
Page 240
238 Service and maintenance Confirmations Confirmation of service is recorded in the Service and Warranty Booklet. The date and mileage is completed with the stamp and signature of the servicing workshop. Make sure that the Service and Warranty Booklet is completed correctly as continuous proof of service is essential if any warranty or goodwill cl[...]
-
Page 241
Service and maintenance 239 Additional engine oil additives The use of additional engine oil additives could cause damage and invalidate the warranty. Engine oil viscosity grades The SAE viscosity grade gives information of the thickness of the oil. Multigrade oil is indicated by two figures, e.g. SAE 5W-30. The first figure, followed by a W, indic[...]
-
Page 242
240 Technical data Technical data Vehicle identification .................. 240 Vehicle Identification Number .. 240 Identification plate ................... 241 Engine identification ................ 241 Vehicle data ............................... 242 Recommended fluids and lubricants ................................ 242 Engine data .............[...]
-
Page 243
Technical data 241 Identification plate The identification plate is located on the left or right door frame. Information on identification label: 1 : manufacturer 2 : type approval number 3 : vehicle identification number 4 : permissible gross vehicle weight rating in kg 5 : permissible gross train weight in kg 6 : maximum permissible front axle lo[...]
-
Page 244
242 Technical data Vehicle data Recommended fluids and lubricants European service schedule Required engine oil quality All European countries with European service interval 3 237 Engine oil quality Petrol engines (including CNG, LPG, E85) Diesel engines dexos 1 – – dexos 2 ✔ ✔ In case dexos quality is unavailable, you may use max. 1 litre [...]
-
Page 245
Technical data 243 International service schedule Required engine oil quality All countries with international service interval 3 237 Engine oil quality Petrol engines (including CNG, LPG, E85) Diesel engines dexos 1 (if available) ✔ – dexos 2 ✔ ✔ In case dexos quality is unavailable, you may use the oil qualities listed below: All countrie[...]
-
Page 246
244 Technical data All countries with international service interval 3 237 ACEA C3 ✔ ✔ API SM ✔ – API SN resource conserving ✔ – Engine oil viscosity grades All countries with international service interval 3 237 Ambient temperature Petrol and diesel engines down to -25 °C SAE 5W-30 or SAE 5W-40 below -25 °C SAE 0W-30 or SAE 0W-40 dow[...]
-
Page 247
Technical data 245 Engine data Engine identifier code B10XFL B10XFT B12XEL B14XEJ B14XEL B14NEJ Sales designation 1.0 1.0 1.2 1.4 1.4 1.4 Engineering code B10XFT B10XFT B12XER B14XER B14XER B14NEL Piston displacement [cm 3 ] 999 999 1229 1398 1398 1364 Engine power [kW] 66 85 51 55 66 74 at rpm 3700 - 6000 5000 - 6000 5600 4200 - 6000 6000 3500 - 6[...]
-
Page 248
246 Technical data Engine identifier code B14XEL B14NEH B16LER Sales designation 1.4 LPG 1.4 Turbo OPC Engineering code B14XER B14NET B16LER Piston displacement [cm 3 ] 1398 1364 1598 Engine power [kW] 66 110 152 at rpm 6000 5000 5800 Torque [Nm] 130 2) 220 245 at rpm 4000 3000-4500 1900-5800 Fuel type Liquid Gas/Petrol Petrol Petrol Octane rating [...]
-
Page 249
Technical data 247 Engine identifier code B13DTC B13DTE B13DTE B13DTR Sales designation 1.3 1.3 1.3 1.3 Engineering code B13DTC B13DTE B13DTE B13DTR Piston displacement [cm 3 ] 1248 1248 1248 1248 Engine power [kW] 55 55 70 70 at rpm 3750 3750 3750 3750 Torque [Nm] 190 190 190 210 at rpm 1500 - 2500 1500 - 2500 1500 - 3500 1500 - 3000 Fuel type Die[...]
-
Page 250
248 Technical data Engine B14XEL LPG B14NEH B16LER Maximum speed [km/h] Manual transmission 175 207 230 Manual transmission automated – – – Automatic transmission – – – Engine B13DTC B13DTE 55kW B13DTE 70kW B13DTR Maximum speed [km/h] Manual transmission 164 182 182 177 Manual transmission automated – 182 182 – Automatic transmissio[...]
-
Page 251
Technical data 249 Vehicle weight Kerb weight, 5-door vehicle, basic model without any optional equipment Engine Manual transmission Manual transmission automated Automatic transmission without / with air conditioning [kg] B10XFL 1199 / 1214 – – B10XFT 1199 / 1214 – – B12XEL 1163 / 1178 – – B14XEJ 1163 / 1178 – – B14XEL 1163 / 1178 [...]
-
Page 252
250 Technical data Kerb weight, 3-door vehicle and van, basic model without any optional equipment Engine Manual transmission Manual transmission automated Automatic transmission without / with air conditioning [kg] B10XFL 1163 / 1178 – – B10XFT 1163 / 1178 – – B12XEL 1120 / 1135 – – B14XEJ 1141 / 1156 – – B14XEL 1141 / 1156 1141 / [...]
-
Page 253
Technical data 251 Vehicle dimensions 5-door vehicle 3-door vehicle OPC Length [mm] 4021 4036 4036 Width without exterior mirrors [mm] 1746 1736 1736 Width with two exterior mirrors [mm] 1944 1944 1944 Height (without antenna) [mm] 3) 1466 - 1516 1466 - 1501 1466 - 1501 Length of load compartment floor [mm] 705 705 705 Length of load compartment wi[...]
-
Page 254
252 Technical data Capacities Engine oil Engine B10XFL B10XFT B12XEL B14XEJ B14NEJ B14XEL B14NEH B14XEL LPG B16LER B13DTC B13DTE B13DTR including Filter [l] 4.0 4.0 4.0 4.0 4.0 3.5 between MIN and MAX [l] 1.0 1.0 1.0 1.0 1.0 1.0 Fuel tank Engine B10XFL B10XFT B12XEL B14XEJ B14NEJ B14XEL B14NEH B14XEL LPG B16LER B13DTC B13DTE B13DTR Petrol/diesel, r[...]
-
Page 255
Technical data 253 Tyre pressures Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) B12XEL, B14XEL, B14XEL LPG, B14XEJ 175/70 R14, 185/70 R14, 185/65 R15, 195/55 R16, 215/45 R17 2[...]
-
Page 256
254 Technical data Comfort with up to 3 people ECO with up to 3 people With full load Engine Tyres front rear front rear front rear [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) B14NEH SPORT 195/55 R16 230/2.3 (34) 230/2.3 (34) 270/2.7 (39) 250/2.5 (37) 260/2.6 (38) 320/3.2 (46) 215/45 R[...]
-
Page 257
Customer information 255 Customer information Customer information ................ 255 Declaration of conformity ......... 255 Collision damage repair ........... 257 Software acknowledgement .... 257 Vehicle data recording and pri‐ vacy ........................................... 259 Event data recorders ............... 259 Radio Frequency Iden[...]
-
Page 258
256 Customer information Jack[...]
-
Page 259
Customer information 257 Translation of the original declaration of conformity Declaration of conformity according to EC Directive 2006/42/EC We declare that the product: Product designation: Jack Type/GM part number: 13331922 is in compliance with the provisions of Directive 2006/42/EC. Applied technical standards: GMN9737 : jacking GM 14337 : sta[...]
-
Page 260
258 Customer information copyright holders be liable for any claim, damages or other liability, whether in an action of contract, tort or otherwise, arising from, out of or in connection with the software or the use or other dealings in the software. Except as contained in this notice, the name of a copyright holder shall not be used in advertising[...]
-
Page 261
Customer information 259 original source. Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names “Info- ZIP” (or any variation thereof, including, but not limited to, different capitalizations), “Pocket UnZip,” “WiZ” or “MacZip”[...]
-
Page 262
260 Customer information When using the vehicle, situations may occur in which these technical data related to other information (accident report, damages on the vehicle, witness statements etc.) may be associated with a specific person - possibly, with the assistance of an expert. Additional functions contractually agreed upon with the client (e.g[...]
-
Page 263
Customer information 261[...]
-
Page 264
262 Index A Accessories and vehicle modifications .......................... 191 Adjustable air vents ................... 134 Airbag and belt tensioners ........... 91 Airbag deactivation ................ 49, 92 Airbag label................................... 44 Airbag system .............................. 44 Air conditioning regular operation ....[...]
-
Page 265
263 Control indicators.......................... 88 Control of the vehicle ................. 137 Controls ........................................ 77 Convex shape .............................. 30 Coolant and antifreeze ............... 238 Corner lighting ............................ 118 Cruise control ...................... 96, 157 Cupholders ....[...]
-
Page 266
264 Headlights................................... 115 Headlights when driving abroad 117 Head restraint adjustment ............. 8 Head restraints ............................ 36 Heated mirrors ............................. 31 Heated rear window ..................... 33 Heated steering wheel ................. 77 Heated windscreen ..................[...]
-
Page 267
265 R Radio Frequency Identification (RFID) ..................................... 260 Radio remote control ................... 23 Reading lights ............................ 123 Rear carrier system ...................... 60 Rear floor storage cover .............. 71 Rear fog light ....................... 96, 120 Rear view camera ...................[...]
-
Page 268
266 Upholstery .................................. 235 Using this manual .......................... 3 V Vehicle battery ........................... 196 Vehicle checks............................ 192 Vehicle data ................................ 242 Vehicle data recording and privacy ..................................... 259 Vehicle detected ahead ..[...]
-
Page 269
www.opel.com Copyright by ADAM OPEL AG, Rüsselsheim, Germany. The information contained in this publication is effective as of the date indicated below. Adam Opel AG reserves the right to make changes to the technical specifications, features and design of the vehicles relative to the information in this publication as well as changes to the publi[...]